Database Develop

Remove AT&T emblem

Anyone have any sugggestions on how to remove the at&t emblem from the top right corner without marring the finish?

sugar cube or grains. use search.

DO NOT USE SUGAR, you WILL mar the finish.
Use "Goo-Off" or Nail Polish remover. DO NOT LET IT SIT on the surface. Apply a small amount to a Q-tip and rub in the direction of the grain. (top to bottom on a tilt) So it gently and do NOT over soak the Q-Tip. Go over several times lightly. You want to have several light layered rubs instead of a few heavy ones.
That should do it...

DaddyGoFast said:
DO NOT USE SUGAR, you WILL mar the finish.
Use "Goo-Off" or Nail Polish remover. DO NOT LET IT SIT on the surface. Apply a small amount to a Q-tip and rub in the direction of the grain. (top to bottom on a tilt) So it gently and do NOT over soak the Q-Tip. Go over several times lightly. You want to have several light layered rubs instead of a few heavy ones.
That should do it...
Click to expand...
Click to collapse
Wrong. This will NOT even phase the att logo. As far as I know, there is no way to remove it without ruining the finish under it. My first tilt (i was returning it anyway for an exchange) I even took an exacto knife to the logo and removed part of one letter to find its kinda etched into the finish under it. Until I see a picture of someones that sucessfully removed it (with no other visible damage under it) in a post here, I wont believe its possible to do.

Yep, I tried all kinds of sugar cubes (cane sugar, crystal sugar, rock sugar) and also nail polish, 100% acetone professional studio strength -- didn't do anything.
Anybody have any bright ideas?

I used thermite to remove the logo and it works great.
Just a side note if you leave it on to long it will eat clear through your phone
This freaking logo is ment to stay for life

yzf750 said:
Wrong. This will NOT even phase the att logo. As far as I know, there is no way to remove it without ruining the finish under it. My first tilt (i was returning it anyway for an exchange) I even took an exacto knife to the logo and removed part of one letter to find its kinda etched into the finish under it. Until I see a picture of someones that sucessfully removed it (with no other visible damage under it) in a post here, I wont believe its possible to do.
Click to expand...
Click to collapse
picture?!..i can do a better job at photoshop..but removing that logo, i havent seen a job well done!

I was hoping this thread was to remove it on the AT&T on the top left of the Today screen. Anyone?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

thats your carrier...

persiansown said:
thats your carrier...
Click to expand...
Click to collapse
haha! I'm aware that is my carrier. I'd have to be pretty derr to not realize that. I've seen other people post screenshots of their today screen and that was something different than a cell carrier. I'll just go search for them and ask.

Yeah!!!! GO SOX!!!!!

dsera said:
I was hoping this thread was to remove it on the AT&T on the top left of the Today screen. Anyone?
Click to expand...
Click to collapse
try this its works well on my tilt and can change to wut ever.

Thanks for the replies. I will y thermite or goof-off. Where can I find thermite?

Can we keep this on topic, we are straying. I am clearly talking about the device logo painted on the hardware.

unorthodoxx said:
Thanks for the replies. I will y thermite or goof-off. Where can I find thermite?
Click to expand...
Click to collapse
Let me help you: GOOGLE

msg1285 said:
I used thermite to remove the logo and it works great.
Click to expand...
Click to collapse
!?!?!?!?!?!?!?!?!?!?!?!?!?!?!?!?!?!?!?!?!?!?!?!?!?!?!?!?!?!?!?!?!?!?!?!?!?!?!?!?
Can you please elaborate on this? What ratio did you mix? How much exactly did you use? Thermite is nasty stuff.

dgduris said:
Let me help you: GOOGLE
Click to expand...
Click to collapse
No ****...can you elaborate on you experience with thermite? By the way I know what google is and how to use search.
We are having a discussion and it is normal for someone to expound instead of dropping oneliners quoting your favorite search engine.

dsera said:
haha! I'm aware that is my carrier. I'd have to be pretty derr to not realize that. I've seen other people post screenshots of their today screen and that was something different than a cell carrier. I'll just go search for them and ask.
Click to expand...
Click to collapse
..smaht girl...you'll find that info by searching. I think what you want it the HTC Today Screen in Kaiser threads
On that other logo..anyone care to share a photo with the silkscreened logo removed??? No damage?? If you edit it your a loooooser!
My guess...bring it to an auto body shop let them tell ya before you bugger up you phone...or by a Kaiser like I did
ciao!

I dunno if we mean the same thermite, but the thermite I know becomes very hot if you ignite it! Once it's lit it can evaporate liquid nitrogen (brainiacs)Though you'll need quite some firepower to light it...

Thermite will burn through an engine block. Obviously he's being flipant.

Screen of my HD2 broken [PHOTO] any tutorial (or videotutorial) to change it?

Hi:
This is my new HD2
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Even when broken, the display is working properly (I can open programs, make calls...)
I've seen on eBay a screen and tool to replacement:
for HTC HD2 HD 2 II Leo LCD Digitizer Touch Screen+Tool
...but I have no idea how to change the screen and I need a toturial (or video tutorial) to change the screen
¿Can you help me?
Thanks

what the heck did you do?

open nuts with it
when I left the car, hd2 I fell down from the seat

eek... that happens all the time to me with past phones... now I am really scared. Your leather case didnt do anything to save it eh?
You may want to check out Cnn.cn. It's a great website for buying spare parts too.
http://cnn.cn/shop/htc-hd2-oem-digitizer-p-7979.html
They are selling it for $65.99. They usual post how-to videos also. I suggest maybe looking at comparable phones.

nuki said:
...but I have no idea how to change the screen and I need a toturial (or video tutorial) to change the screen
¿Can you help me?
Click to expand...
Click to collapse
may be this can help you
http://pockethacks.com/htc-hd2-disassembled-in-pictures/

Cheaper here
http://www.truesupplier.com/oem-htc-hd2-lcd-lens-touch-screen-digitizer-pad-c-424-pr-20090.html

Thanks drewX2 and inku79 for the links.
DaveMC1979, thanks. Very useful. But there isn't any picture of how to separate the LCD from the touchscreen, or how connect this:
Does any other site, or videotutorial tutorial?
Thanks a lot for your help

nuki said:
Hi:
This is my new HD2
Even when broken, the display is working properly (I can open programs, make calls...)
I've seen on eBay a screen and tool to replacement:
for HTC HD2 HD 2 II Leo LCD Digitizer Touch Screen+Tool
...but I have no idea how to change the screen and I need a toturial (or video tutorial) to change the screen
¿Can you help me?
Thanks
Click to expand...
Click to collapse
did you break your screen when your HD2 is inside the noreve leather case?

Yes, but it was open 'mea culpa'

Ouch sorry to hear about this. I read somewhere about it is better to get a kit with the LCD and digitizer together. Some people seemed not to have luck trying to separate and replace and put back together. Just what I read, I have no idea.
Good luck and hope you get it going soon.

Thanks bobsbbq. Some questions:
1.- Then, if I bought together (touchscreen and LCD) it would be easier to replaced them
2.- Where can I buy them together?
Thanks bob

I dont have instructions for you how to swap the display, but I can say the following: I had an Samsung Omnia, and the resistive touchscreen there was very bad. But there was an replacement which seemed to work much better. So I bought a new LCD + digitizer and started to disassemble the whole phone. I have to say, I'm not very good in disassembling electronics or reparing them. But after an hour of hard work where I sometimes had a bad feeling by pulling out the different flat-cables, the touchscreen was replaced and worked like a charm.
What I wanted to say with my post: I think you can do it, if you have the right equipment and some time. Good luck.

I broke the screen on my Diamond2 and tried to fix it myself, but broke it beyond repair.
Be careful!

nuki said:
Thanks bobsbbq. Some questions:
1.- Then, if I bought together (touchscreen and LCD) it would be easier to replaced them
2.- Where can I buy them together?
Thanks bob
Click to expand...
Click to collapse
I don't know I found it here in one of the threads when I was just browsing and looking in about screen protectors and screen sensativity. There was a thread with a video, but I did not watch it. Just look around or try to search.
Sorry I can't help more.

http://4u-kidi.com/product.php?form=PDA%20AND%20SMARTPHONE&mode=14&lag=&search=SPARE%20PARTS&name=Touch%20HD2&more=1&brand=HTC&ic=
52 usd

oh man... I feel for you. You can check out a thread in the Accessories section of the HD1. Basically you are better off buying TouchScreen and LCD preassembled and replace the whole thing

Same thing happened to mine although the damage is lesser. Is the bezel around the glass (same piece of plastic that makes the back cover) damaged?
Mine is chipped heaps in the corner
I successfully replaced the screen on my Touch HD but was unable to remove the LCD screen from the digitizer so had to purchase a whole kit for about $200.
I can't find any for the HD2 though
To the people saying so: are you sure that the LCD is stuck to the digitizer like in the Touch HD or just speculation / thinking you read it somewhere?

Suction Pad..
nuki said:
Hi:
This is my new HD2
Even when broken, the display is working properly (I can open programs, make calls...)
I've seen on eBay a screen and tool to replacement:
for HTC HD2 HD 2 II Leo LCD Digitizer Touch Screen+Tool
...but I have no idea how to change the screen and I need a toturial (or video tutorial) to change the screen
¿Can you help me?
Thanks
Click to expand...
Click to collapse
Hi there,
I remember seeing the inside of the HTC HD2 online once and the screen had a suction pad on in it abit like this one. Maybe you should investigate that. I will post the link if I can find it.
You may also want to check your warranty you never know.

oshikawa said:
Hi there,
I remember seeing the inside of the HTC HD2 online once and the screen had a suction pad on in it abit like this one. Maybe you should investigate that. I will post the link if I can find it.
You may also want to check your warranty you never know.
Click to expand...
Click to collapse
I have found it HTC HD2 Dissassembled in pictures
Hope this helps.

Unlucky mate!
I've dropped mine a couple times from about waist height (6ft 4) face down on to concrete thought it was a goner but some how it survied! I feel lucky now.
Have you not got insurance to get it fixed or replaced saves hassle looks like a ***** of a device to take apart.
Good luck.

My himalaya sink in milk

Hi
Yesterday, while i was talking with my girl with my himalaya i was eating milk flakes. By my mistake my himalaya fell into milk, when on voice connection. Only thing which has not been into milk is microphone and dpad. I told her that my himalaya is in milk but I could talk anyway (lol). I got my himalaya out of milk, told that I must disconnect and then himalaya died. I tried to run it but all up buttons are connected (pressed) so it went into hardreset mode. I tried to run without any changes (NO, NO, NO) and it ran but all buttons without dpad and phone buttons were pressed. Today, after dry night, I tried to run. There is some changes: Digitizer failed, screen has dark stains, buttons are sometimes pressed, but I can run without HR mode.
What should I do?

PL
Siemka
Widzę niezła wtopa W każdym razie nie włączaj już telefonu dopóki go nie wyczyścisz bo tylko pogorszysz sytuację
Po pierwsz kup izopropanol(jak nie wiesz gdzie to napisz na priva), tylko uważaj na ceny bo na necie za 100ml się płaci 30zł a normalnie z 1l się płaci 5zł
Rozbierz telefon na części pierwsze, następnie weź pałeczki kosmetyczne mocz je obficie w izopropanol i czyść płytkę telefonu z zabrudzeń aż do skutku.
Ekranu nie uratujesz za bardzo już zostanie jak jest Pewnie mleko weszło między folię ekranu i tego się już nie da naprawić
Powodzenia
In english
I see you had quite an accident Dont try to turn on phone again until you clean him because situatiom might get worst
First you need to buy a isopropylene(if you dont know where to buy pm me), watch out for price this should cost 5zł for 1l
Then dismantle your hima, take cosmetic stick wet in isopropylene and clean PCB until you dont see any milk on it.
Screen is doomed, so stain is not removeable.
Good luck man

Do not swich on your device till it's totally dryed and cleaned !!!
Look here:http://forum.xda-developers.com/showthread.php?t=275788
and search/google for 'dismantle' there are instructions.
eg:http://www.mikechannon.net/

I put my himalaya into Nail polish remover water... No acetylen, just alcohol and glicol. Now it turn on - anything works except 2 things:
- No standby button (vacuumed into vacuum cleaner, lol) Must have subtitute
- Darken plames on display shown there:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
How to fix? Any suggestions?

As i said before, you cant fix your screen. The only thing you can do is replace with another one
Stand by button can be easly replaced with some rubber and plastic

As mj_weed said, you'll need a replacement part. I'd suggest dismantling it first and inspecting both the LCD and digitizer. It may be one or the other (or possibly both).

Taking apart the digitizer and the display!!!
TaurusBullba said:
As mj_weed said, you'll need a replacement part. I'd suggest dismantling it first and inspecting both the LCD and digitizer. It may be one or the other (or possibly both).
Click to expand...
Click to collapse
Even Moderator sometimes are wrong!
Dismantle the device and disconnect the TS/Display from the mainboard.
After that, take out the display by using a small screwdriver to remove the 2 screws fixing the display and the speaker.
After that, push the small plastic lashes on the sides of the display and take it out of the cover upwards.
Now, you should have the metal back covering a white plastic frame and the digitizer mounted on the front.
The digitizer can be carefully removed, using a razor blade.
From now on: no more dust around!!!! (to aero: no milk!!!) Ha, Ha, sorry.
It is fixed with super thin double sided soldering tape. As you have been carefully enough and didn't brake the glass part of the TS you can fix it after cleaning without the need of something new.
The display itself can be take apart with the same screwdriver opening the sides of the metal back. Don't bend the metal, it is is just clipped.
Inside there are some (1 or 2?) filmslides and the back side of the display to clean .
This should have been all. In case the digitizer is broken, I recovered one of the broken display of my 8.5! Euro Alpine. (No joke!)
The (used) replacement display, I bought at X-mas came from china.
10 Euro cost (differs on changing course) and 12 Euro shipping.
There are still some left!! It took about 14 days to arrive, so it is worth waiting, as this is still half the price of a new one!!!
Good luck, to everyone on your own DIY-experiences.
http://forum.xda-developers.com/showthread.php?t=338671

My digitizer works , even better.

aeroflyluby said:
My digitizer works , even better.
Click to expand...
Click to collapse
Good to hear, I think it's some rest of your breakfast on the milky filmslides that should cover the back of the display to brighten it via the LED at the bottom of that white frame.
You vacuumed your I/O knob? Crazy.
The next cheap XDA II I by at that big auction store, I'll send efsane in case you fix yours!!!

Luby cries.

aeroflyluby said:
Luby cries.
Click to expand...
Click to collapse
Ok. the next device will be yours as donation!
Ask Ather, we'll get that managed.
Is yous still broken (or ready to get flashed again), or do you need one as secondary device?

My himalaya can be used... as a secondary monitor, sms server, and as a brick.
No sound anyway.
I'm going to sell my guitar to buy next windows mobile phone, now it is toshiba g900 turn!

muckelmaus said:
Even Moderator sometimes are wrong!
Click to expand...
Click to collapse
Of course we can be!
I had a similar issue and unfortunately no amount of cleaning resolved it. In my situation, I needed a new LCD. Often times that's the case, that's why it's always a good idea to take it apart first and check it out for yourself. Good luck to all!

Good news, to all who like aoeroflylubys' roms, a new used device is on the way!

same thing happened to me when we had the great flood back in Oct., I was able to restore my HIMA by drying it up bt the digitizer stoped working. i tried removing the digitizer and i learned that it was jst a piece of glass that sticks above the LCD. It could be possible that some of the liquid is still stuck in the middle of the LCD and the digitizer mirror. I think it realy needs a replacement of the digitizer. what i did to my HIMA was I bought a replacement LCD from Ebay in china and it works fine now.

I'm sorry, friend.
HI aeroflyluby
I had my fall But as a final screen, you lose and I need to change it.
I've carved out. Inside a plastic sheet multi-nested.
1. When you need water to quickly remove the LCD screen of your Ecedngm out and make it dry.
2. You be careful if you never fix it. But I am a mechanic by telephone.
3. In the end, you will definitely change the screen. The monitor in my price used is very rare and expensive.

Dear admins and mods, please close this thread, as it outdated 5 month now!!
I donated a working device to luby and he became one of the most active cookers (beside
YAHAHANUVOELEGANLC) since then.
I'm still working on a cheap hima for efsane, as his roms are still present and wanted here.
It's my way to show those cockers, that their work is worthfull.
Thanks to globalization :http://cgi.ebay.de/ws/eBayISAPI.dll?ViewItem&item=180488280008&ssPageName=STRK:MEWNX:IT
and the football world championships: http://cgi.ebay.de/ws/eBayISAPI.dll?ViewItem&item=290443901819&ssPageName=STRK:MEWNX:IT (Brasilia played at the same time, and no one looked into the internet)
I coupled a new project of mine, less then 12 euros!! (BTW my first non HTC device)
So, I am really convinced, to get a new used hima for efsane at last, to get him back to our beloved forum.

Better camera quality - The only one here or?

Hi guyz!
I just wanted to share my experience with my o2x those days... For a long time I was getting some blury photos with a bit of too much brighnes, and I didnt know what to do. After a lil accident with my phone, the backcover of the phone, the little black plastic that covers the camera was cracked in the corner. So I decided to just remove it and dont give a f**k
Thats the sh*t Im talking about, the little black thing there
http://dl.dropbox.com/u/19114954/cameraLOL/plastika i tako to.jpg
Well, I did that and this is what happend... here is a compare of my photos with the black cover to the left, and without the plastic cover to the right.
https://www.dropbox.com/s/bk3uao0amwmhwwc/before-after.jpg
P.S. The plastic glass that covered my cam wasnt damaged and I was cleaning it...
Everyone can try it, take a picture with your backcase and then remove the backcase and take a picture again
Hope someone is gonna be happy like me !!!

As a technician I can suggest the best in house fat stain cleaning method.... it is
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
oh... wrong image thats the weekend brain emmc eraser, but I'll leave...
This ONE
Just stick it and remove it... as scotch isn't very strong tape, it only removes the fat and leaves the transparent plastic in perfect clean state!
use it on all surfaces, try out on the screen first, you'll see how it works!

That's the old trick with our optimus There are threads mentioning this,some people got better results some don't see any difference
I removed plastic cover from mine long time ago and have some improvement

yes, when I want good pictures I remove the back cover, but I would like to buy another back cover and remove that piece of plastic just in case I want to protect it again with the original one.
---------- Post added at 02:36 PM ---------- Previous post was at 02:10 PM ----------
Ferrum Master said:
As a technician I can suggest the best in house fat stain cleaning method.... it is
oh... wrong image thats the weekend brain emmc eraser, but I'll leave...
This ONE
Just stick it and remove it... as scotch isn't very strong tape, it only removes the fat and leaves the transparent plastic in perfect clean state!
use it on all surfaces, try out on the screen first, you'll see how it works!
Click to expand...
Click to collapse
Omg man, you're awesome. I took a picture with the cover before cleaning the plastic, another after cleaning it and one without the cover, I'm amazed!
With the plastic clean the picture is as good or maybe better than without the cover, it's amazing!
Before cleaning it the camera performed really bad. Too bad that the plastic gets oiled so easily, but this tape trick works and very very good, thank you very much

good work!! been taking crap pic for ages thinking it was just cm10.1 cam

jessnorman said:
good work!! been taking crap pic for ages thinking it was just cm10.1 cam
Click to expand...
Click to collapse
Yes, old discussion
With the plastic cover of the sensor (why LG did it??) we have to take care (clean) of:
1) external side of the plastic
2) internal side of plastic
3) external side of sensor
P.S. plus... scratches/abrasion in the transparent plastic cover (internal and external..).
Doing this, there are no doubts: the qualty improvement is a fact.

torq1337 said:
Hi guyz!
I just wanted to share my experience with my o2x those days... For a long time I was getting some blury photos with a bit of too much brighnes, and I didnt know what to do. After a lil accident with my phone, the backcover of the phone, the little black plastic that covers the camera was cracked in the corner. So I decided to just remove it and dont give a f**k
Thats the sh*t Im talking about, the little black thing there
http://dl.dropbox.com/u/19114954/cameraLOL/plastika i tako to.jpg
Well, I did that and this is what happend... here is a compare of my photos with the black cover to the left, and without the plastic cover to the right.
https://www.dropbox.com/s/bk3uao0amwmhwwc/before-after.jpg
P.S. The plastic glass that covered my cam wasnt damaged and I was cleaning it...
Everyone can try it, take a picture with your backcase and then remove the backcase and take a picture again
Hope someone is gonna be happy like me !!!
Click to expand...
Click to collapse
can confirm that . Just try and work . Hvala stari :good:

I made 2 photos.
Before cleaning the plastic glass, and after.
Awesome change!
tapatalked with LG P990

Awesome

wow what a major difference, shame the phone is a fingerprint, grease magnet

I don't have this plastic cover for year maybe, it just felt of

I've removed the plastic and the improvements are amazing. But still, it's a really bad camera..

Using other apps instead the stock camera the quality improves. Camera360 works good with this phone

Improve the input, and the output improves

[Q] Camera scratches

Got my p7 since 1 month, but after 1 week my back camera was full of scratches...
Anyone else got this issue?
Is there any way to remove them ?
thank

I haven't like that issue

The rear camera, sadly, isn't protected by Gorilla Glass. It's just some oleophobic coating.
You can try polishing it a little with toothpaste, watch the video below:
https://www.youtube.com/watch?v=xhhOcIRMfWc

I have te same problem.

no effect
GawDroid said:
The rear camera, sadly, isn't protected by Gorilla Glass. It's just some oleophobic coating.
You can try polishing it a little with toothpaste, watch the video below:
https://www.youtube.com/watch?v=xhhOcIRMfWc
Click to expand...
Click to collapse
nothing change i tested it, it makes wort's..

Same problem here. You can try cutting a round piece of screen protector and putting it on the camera.
Sent from my HUAWEI P7-L10 using XDA Free mobile app

Same problem, the first big scratch came after just few days. Luckily scratches don't seem to affect photo quality.

The scratches are caused by a layer above the real glas, which should reduce fingerprints. As described in a German forum, I used a knife just to scratch about the glas and to remove the layer. After cleaning with a wet fabric, the lense was like it was at the beginning. I hope u understand what I tried to figure out. If not, I could describe it more detail..
Here is the link to the thread, read #19: android-hilfe. de/showthread.php?t=596970 (remove the space between hilfe. de)

l3Nni said:
The scratches are caused by a layer above the real glas, which should reduce fingerprints. As described in a German forum, I used a knife just to scratch about the glas and to remove the layer. After cleaning with a wet fabric, the lense was like it was at the beginning. I hope u understand what I tried to figure out. If not, I could describe it more detail..
Here is the link to the thread, read #19: android-hilfe. de/showthread.php?t=596970 (remove the space between hilfe. de)
Click to expand...
Click to collapse
Oh.. so that can b cleared..thats a good news..
Btw u shud all try gadgetshieldz screen guard..it has complete package ..as we have a full glass phone

l3Nni said:
The scratches are caused by a layer above the real glas, which should reduce fingerprints. As described in a German forum, I used a knife just to scratch about the glas and to remove the layer. After cleaning with a wet fabric, the lense was like it was at the beginning. I hope u understand what I tried to figure out. If not, I could describe it more detail..
Here is the link to the thread, read #19: android-hilfe. de/showthread.php?t=596970 (remove the space between hilfe. de)
Click to expand...
Click to collapse
Hi mate, thanks for the tip, is it safe to scratch it? I mean if I scratch it with a knife, will it damage the real glass underneath it?

Yes, the glass got no single scratch. But the metallic ring may get, so be careful at the border. Another tip written in the mentioned thread was to use politure, which should work even better..

l3Nni said:
Yes, the glass got no single scratch. But the metallic ring may get, so be careful at the border. Another tip written in the mentioned thread was to use politure, which should work even better..
Click to expand...
Click to collapse
I did it but it is still full of scratches.. will try once more.

if we change the battery back door , shall it change with that new back door
it depends on if that glass with that backdoor as one piece

am EXTRA careful how i put phone on table .. unfortunately phone lies on camera..

Is that will be a solution , is it contain phone camera.. glass which is scratched
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

haninatoon said:
Is that will be a solution , is it contain phone camera.. glass which is scratched
Click to expand...
Click to collapse
where to buy that one?

Valle1908 said:
I did it but it is still full of scratches.. will try once more.
Click to expand...
Click to collapse
And how it goes? Do You got some before After fotos? My before below.