Database Develop

need advice

tryed to install a new rom and did a full wipe the rom didnt install so i rebooted and now when I hold the power volumn button down i get a quick flashing white/red light where the power charge light is on the top left and cannot get into the phone to do a backup restore any ideas?
thanks
can now get the starting x with the unlock icon on screen but still hangs there thanks for any ideas

Did you try to boot into recovery? Did you try to flash the recovery image again via fastboot?

finally got phone into recovery and restored. I have been having this problem several times.
when I try and go into recovery after the phone is shut off I hold the power and volumn button down at the same time and this usually will boot the phone to recovery. But sometimes it hangs up and the small led on the right coener of the phone will flash between red and white. After removing the battery for a few minutes it goes into boot mode.\
Have you heard of any one else with this problem? thinking the phone might have a problem ?
Was excited for a second as I was hheading to bestbuy for the Nexus s. (smile)
But I want to wait a little longer to see whats next. Tons of stuff coming out wonder ehat google will bring us after the nexus s ????
oh thanks for the reply too
john

You could just flash everything back via fastboot. Its in the wiki I think. If not it's in the forum.
Sent from my Nexus One using XDA App

[Q] Power butten not working in recovery

I’ve got an AT&T Captivate that is stuck in 3e recovery, because it won't recognize when I use the power button to select "reboot system now."
Some background:
It was stuck in a boot loop running CM7. I re-installed éclair to take advantage of 2e recovery. Rooted it, and intended to put a version of UCKB1 without 3e recovery, so I could install unsigned files to prep for a re-install of CM. Apparently I flashed the wrong rom or the flash got corrupted. I can’t get it into download mode. Tried using a jig, tried using one-click unbrick. I can’t even use ADB, since it is in recovery.
Any help would be amazing! Thanks in advance.

Does the phone boot all the way to Android or does it still loop?
Did you use the jig while in recovery?
you have to use it on a powered off state.
Just yank the battery and either try the jig while powered off, or if it boots correctly use adb while it's powered up.

Thanks for replying. The phone does not boot into android, it gets stuck in 3e. I used the jig with the phone off. (I did try with it on just for kicks, but no joy.)
The phone "recoginizes" the power button when I try to turn it on, it gets to recovery, and then won't recognize a butten press in order to boot the rest of the way.
Thoughts?

Fixed it
Re-tried with a newly made jig. Must have blown a resister last time. Works now. Thanks for the advice.

I have this same issue intermittently, usually after a modem flash in cwm3. The txt will pop up saying that the back button has been disabled. A battery pull and restart and it reboots fine. Just a mystery to me...

Yeah that happens from time to time.try to Hold both volume buttons. That will sometimes re-enable the back button.
Ionno why that happens....

Some recoveries i've seen used back button or home button to select...just saying might work
Sent from my SAMSUNG-SGH-I897 using xda premium

Yeah some recoveries not all, I know specifically in boog's kernels, you can use the capacitive buttons.
Settings = down
Home = up
Search = select

you have to cycle from the bottom to the top... i don't know why it does this..
Hit down repeatedly until you end at the top. the power button will work.

[Q] Three button salute doesn't work

I currently have The Collective's AoCP build 3 Jelly Bean ROM on my Captivate. I need to go back to the Cyanogen 10 builds because it looks like they've fixed the lag issue. I came upon a really bad accident on my way to work and needed to call 911 ASAP. I unlocked my phone and hit the phone button and it must have taken 20 seconds for the dial pad to come up. I've gotta try something else...
My question is this. I can't get into recovery by turning the phone off and using the 2 or 3 button salute. I've tried volume up - power, volume down - power, and volume up&down - power. No dice. I've learned there is a 3buttonfix that I can download and install, but I read about it first and it says if you're running this bootloader or that bootloader don't use this fix because you WILL hard brick your device. I have no idea what bootloader I'm running and if I can't use this fix, what do I do to fix the issue? For future reference, how do I tell what boot loader I'm running?
The reason I want to MAKE SURE the 3 button salute works is I want to flash from AoCP to CM10 and if something goes wrong, I need to be able to do that. I can hold the power button down now, and choose reboot, then boot into recovery, and that works, but if I soft brick my device, that function won't do me any good.
Any guidance you pros out there have for me would be greatly appreciated. Thanks in advance!

Don't use the 3 button fix. You are correct in that it will hard brick your phone. If adb works, you can use that to reboot into recovery. I think you can do that with a terminal emulator too ("su" first to get root access, then "reboot recovery").
There's not a way to tell which bootloader your on. If you want to know 100% without a doubt your on the latest, flash the kk4 stock ROM. Downside to that is you would have to start over on cm10 or any other aokp. Making a nandroid first will make it less painful.

Also, that dialer lag will happen with any ICS-JB ROM on this phone. It's pretty much unavoidable at this point. Have you ever done the recovery combination before? If not, then you may be doing it wrong. Hold down the volume buttons, and press the power button only until the screen turns on. Hold the volume keys down until you hit recovery.
Oh, duh, you're on AOcP. You should have a recovery option in your power menu under reboot.

Oh said:
I do have a recovery option int he power menu. But what if I soft brick my device? I have a rigged jig somewhere, but that wasn't reliable for me. Not because it doesn't work, but because I made it very, um, frugally.
So there is no way to know what boot loaders I'm on? Darn... I didn't do the original flashing. MobileTechVideos.com did the flashing after I hard bricked it where my jig no longer even worked.
Thanks all for your input, and anything else you may suggest.
Click to expand...
Click to collapse

If you're on AOCP you have GB bootloaders.
Sent from my SGH-I897 using Tapatalk 2

spagman72 said:
If you're on AOCP you have GB bootloaders.
Sent from my SGH-I897 using Tapatalk 2
Click to expand...
Click to collapse
THANK you very much for that info. Do you know of anyway for me to be able to boot into recovery mode using a key combination? I tried what was mentioned above (holding volume up-down after pressing the power until it boots into recovery, but it just goes right to the AoCP boot animation).

Maybe your holding the buttons too long when you try the button combo.

Snevey said:
THANK you very much for that info. Do you know of anyway for me to be able to boot into recovery mode using a key combination? I tried what was mentioned above (holding volume up-down after pressing the power until it boots into recovery, but it just goes right to the AoCP boot animation).
Click to expand...
Click to collapse
You may have already tried this in your many attempts but I'll still throw in my two cents.
Starting with power off hold all three buttons at the same time. First you should see the att splash screen and then your kernel splash screen. Then the phone should turn off. Keep holding the buttons til you see the att screen again and then release them all. That should get you into recovery. At least that is exactly how I get there besides of course the power menu.
Sent from my SGH-I897 using xda app-developers app

Wait are you missing download mode also?
Sent from a jelly bean

Yes, I do appear to be missing download mode as well... What have I done? The phone runs just fine with AOCP The Collective, except it's just getting too laggy for me and I want to check out CM10's newest releases. BUT, I don't want to be flashing ROM's until I can boot into Recovery. I can REBOOT my phone from my Power menu once the phone boots up, but I can not get any button combination to work to boot me into recovery.

Regarding download mode... I can not enter download mode either. I power down, take battery out, remove SIM, place battery in phone hold volume up/down and insert usb cable. Just displays the battery charging meter...

When your phone turns on, do you have a white AT&T screen or is it a black gt-i9000 screen?
Sent from a jelly bean

korockinout13 said:
When your phone turns on, do you have a white AT&T screen or is it a black gt-i9000 screen?
Sent from a jelly bean
Click to expand...
Click to collapse
I do get the white AT&T screen... It comes on, then flash to a black screen and then back to the same white at&t screen, then to The Collective boot animation. This wouldn't be a problem for me, but I do want to play with some other ROM's, but I don't want to without this working...

I believe you can reboot in recovery using adb with the command : "reboot recovery"
Sent from my SGH-I897 using Tapatalk 2

spagman72 said:
I believe you can reboot in recovery using adb with the command : "reboot recovery"
Sent from my SGH-I897 using Tapatalk 2
Click to expand...
Click to collapse
I KNOW I can, but I can only do that if I am able to boot into a rom. What if something gets hosed?

Snevey said:
I KNOW I can, but I can only do that if I am able to boot into a rom. What if something gets hosed?
Click to expand...
Click to collapse
Find that jig you rigged up and see if that gets you into download mode. If so I suggest using a one-click back to kk4 and I'd get the one with boot loaders for good measure. Then see if you can do any of the button combos
Sent from my SGH-I897 using xda app-developers app

m1batt1 said:
Find that jig you rigged up and see if that gets you into download mode. If so I suggest using a one-click back to kk4 and I'd get the one with boot loaders for good measure. Then see if you can do any of the button combos
Sent from my SGH-I897 using xda app-developers app
Click to expand...
Click to collapse
Thanks for the suggestion... I downloaded a 1 click to KK4 and used my jig, which worked. Got really lucky, as something happened at the SET PIT table during the ODIN process and I had to start over. Luckily it didn't brick, but on the next boot I got the icon of a phone and a computer with a triangle in between those icons. I ran ODIN again after booting into download mode, and it took. I'm not running KK4 and I can do the 3 finger salute, so now I'm going to start over with rooting and moving to Jelly Bean. What a way to get the recovery back...
Thanks again for everyone's assistance.

Snevey said:
Thanks for the suggestion... I downloaded a 1 click to KK4 and used my jig, which worked. Got really lucky, as something happened at the SET PIT table during the ODIN process and I had to start over. Luckily it didn't brick, but on the next boot I got the icon of a phone and a computer with a triangle in between those icons. I ran ODIN again after booting into download mode, and it took. I'm not running KK4 and I can do the 3 finger salute, so now I'm going to start over with rooting and moving to Jelly Bean. What a way to get the recovery back...
Thanks again for everyone's assistance.
Click to expand...
Click to collapse
Glad that got you up and running. Sometimes it's unavoidable to flash back to stock like that but I suggest you keep that one click handy in case something else strange happens.

[SOLVED] CM10.1, forgot to reset, bricked my phone?

Hey guys,
due to being fed up with Sense I installed the latest CM10.1 nightly build for the HTC ONE with clockworkmodtouch recovery and now my phone seems to be bricked.
I pushed the rom on the device via adb sideload which went without a problem. Then I rebooted without wiping everything, which I simply forgot (I know...). Then the CM logo animation started and didn't stop until the battery was fully drained. After charging the battery and starting the phone, it goes to the HTC logo with the red warning text, and then directly to the CM logo again. I can't get into the bootloader via power+vol up or power+vol down, and once the phone is running I can't even hardware reset it via those keys. The soft keys' illumination just starts blinking.
Maybe someone has had a similar problem and can point me in the right direction. I can't access the phone via adb btw.
TL;DR:
Installed CM10.1 with cwmt recovery via adb sideload
Forgot to wipe everything before rebooting
Phone stuck in CM start animation
Hardware keys don't seem to do anything (soft keys blink), even if I hold them for over a minute
adb devices or anything like that doesn't work
Any help would be appreciated

0mega4711 said:
Hey guys,
due to being fed up with Sense I installed the latest CM10.1 nightly build for the HTC ONE with clockworkmodtouch recovery and now my phone seems to be bricked.
I pushed the rom on the device via adb sideload which went without a problem. Then I rebooted without resetting everything, which I simply forgot (I know...). Then the CM logo animation started and didn't stop until the battery was fully drained. After charging the battery and starting the phone, it goes to the HTC logo with the red warning text, and then directly to the CM logo again. I can't get into the bootloader via power+vol up or power+vol down, and once the phone is running I can't even hardware reset it via those keys. The soft keys' illumination just starts blinking.
Maybe someone has had a similar problem and can point me in the right direction. I can't access the phone via adb btw.
TL;DR:
Installed CM10.1 with cwmt recovery via adb sideload
Forgot to reset before rebooting
Phone stuck in CM start animation
Hardware keys don't seem to do anything (soft keys blink)
adb devices or anything like that doesn't work
Any help would be appreciated
Click to expand...
Click to collapse
are you sure your holding down the power button for long enough? the softkeys will blink until the phone has reset itself. takes around 10-15 seconds.

syaoran68 said:
are you sure your holding down the power button for long enough? the softkeys will blink until the phone has reset itself. takes around 10-15 seconds.
Click to expand...
Click to collapse
Yeah, I tried holding them for over a minute already. No luck.

if you can get to the cm logo you should be able to plug the phone in and reboot to recovery with adb
adb reboot recovery.

gunnyman said:
if you can get to the cm logo you should be able to plug the phone in and reboot to recovery with adb
adb reboot recovery.
Click to expand...
Click to collapse
same problem here now, stuck in the htc bootscreen. power button won't work,adb neither

youre in boot reloop that's not a brick
see the above post. GO back into recovery and reflash a rom

domineus said:
youre in boot reloop that's not a brick
see the above post. GO back into recovery and reflash a rom
Click to expand...
Click to collapse
How can I get into recovery if the hardware buttons don't seem work (except to turn the phone on)?

That happened to me flashing a ROM. I went into recovery and wiped cache and davlik. Then it just takes time finding the right restore.
sent from my brain to your eyes using my GS3 Cm 10.1

0mega4711 said:
How can I get into recovery if the hardware buttons don't seem work (except to turn the phone on)?
Click to expand...
Click to collapse
Power on with vol down pressed. Wait for boot loader. Connect usb. Wait for phone to say fastboot usb.
Fastboot erase cache
from computer command prompt then
Fastboot reboot recovery
----------------------o('_')o----------------------
Sent from an HTC One with using xda app:
TrickDroid ROM 5.4.0
teaMSeven(stable) kernel 3.9.2

apokalypzninja said:
That happened to me flashing a ROM. I went into recovery and wiped cache and davlik. Then it just takes time finding the right restore.
sent from my brain to your eyes using my GS3 Cm 10.1
Click to expand...
Click to collapse
Like I said in my OP, I'm not able to enter recovery. If I press power+vol up for a minute or so, the phone boots AFTER I let go of the buttons. Then it goes to the HTC logo, 5 secs later to the animated CM logo, which will rotate until the battery is dead.

Tetsumi06 said:
Power on with vol down pressed.
Click to expand...
Click to collapse
Alright, I got into the bootloader now! A big thanks. I feel like an idiot. The problem was that I let go of both the buttons simultaneously, like it says in almost every tutorial. Now that I kept the vol down button pressed it worked. Thanks man.

I don't understand how you can get to the loading screen but not the recovery. That sounds strange. I've been stuck in a boot loop before. I took my battery out, put it in, held the buttons, then it should work fine. I can't understand how it won't go into recovery unless you really messed up.
Sent from my brain to your eyes using my GS3 Cm 10.1
---------- Post added at 06:48 AM ---------- Previous post was at 06:44 AM ----------
Idk if it's the same for all phones, but when you go to recovery or the new ROM menu, it has little blue writing on the top left that says where you are going. I.e… recovery
sent from my brain to your eyes using my GS3 Cm 10.1

apokalypzninja said:
I don't understand how you can get to the loading screen but not the recovery. That sounds strange. I've been stuck in a boot loop before. I took my battery out, put it in, held the buttons, then it should work fine. I can't understand how it won't go into recovery unless you really messed up.
Sent from my brain to your eyes using my GS3 Cm 10.1
---------- Post added at 06:48 AM ---------- Previous post was at 06:44 AM ----------
Idk if it's the same for all phones, but when you go to recovery or the new ROM menu, it has little blue writing on the top left that says where you are going. I.e… recovery
sent from my brain to your eyes using my GS3 Cm 10.1
Click to expand...
Click to collapse
the blue letters are a samsung thing and its hard to do a battery pull on this phone

[Q][Help]Galaxy Slll I9305 bug rebooting

Hello everyone ; Hope you're good,
So my Slll i9305 won't stop rebooting, and he bugged in Samsung logo, and again he reboot, I can't access to recovery mode " volume up, home button, and on button". I hoped to flash him, but I can't too, I can't connect my phone to PC,
I looked for the solution in google, and I finished to arrive here, maybe and I hope I can find the real solution of this problem
Thank you guys,
I'm waiting,
See u

can you boot into download mode?

maultasche said:
can you boot into download mode?
Click to expand...
Click to collapse
Nep, I can't, I can't boot into download mode, and i can't do wipe
It's so complicated for me

That's weird. I assume the power button seems to be faulty. Were you running a stock rom? Did that happen out of the blue?

maultasche said:
That's weird. I assume the power button seems to be faulty. Were you running a stock rom? Did that happen out of the blue?
Click to expand...
Click to collapse
My Pc can't read the usb phone, I looked for all solution, and I tried them all, no hope
so im here needing ur help
thank you

What if you pull out battery for some minutes and then try to start your phone? Doesn't work either?
And my other questions? What did you do before that boot loop happened? Are you running stock ROM and stock recovery?
Btw you don't have to quote each post, it is easier for reading

I give you a summary of the situation
I have a 9305 Black edition SIII, it restarts in a loop, and I can not charge the battery gets stuck with low battery and reboute yet, I even tried a different battery type EB-L1G6LLU and it lasts for two week almost;
The download mode does not work, every time I enabled it restarts,
The recovery mode to wipe the same, it does not even appear,
I tried to connect via keis Odin and the other failure of the operation
I even tried to change the connector, the same thing
Frankly I do not know what to do, If you have a tip, hint is welcome

What did you do before that boot loop happened? Are you running stock ROM and stock recovery? or all custom? If you pull out battery and put it back in, does the phone start on its own without you pressing the power button?

I tried any solution possible in Internet and form from the world wide.
My motherboard are dead so, I have only one solution it's to buy a other.
Thank you to be here and answing
Sent from my HUAWEI G7-L11 using XDA-Developers mobile app

I have the same problem. I had latest ressurection remix rom, Philz Touch recovery and sudenly when I messaging on Whatsapp phone turn off. Then goes in to bootloop with samsung logo. I tried go into recovery but nothing happened, I tried go into downoad mode but when pop up screen with warning and I want press volume up to continue phone going back into bootloop.
So, my motherboard is dead?