Database Develop

Galaxy TAB P1000 NOT Detecting in ODIN

Hello xda users,
I need HELP !
I have a galaxy tab P1000
currently froyo 2.2
wanted to upgrade to GB
Tried the Odin way from another link on this site (MANUAL updation for galaxy tab(p1000) into 2.3.3 gingerbread ), it failed and the Tab got soft bricked,
somehow managed to unbrick it, now its back to its original fw, but it keeps restarting in a loop until i switchd the damn thing off completely
I have tried to go in download mode to flash but odin doesnt recognise it , tried differnt computers too, no use.
I have gone in recovery mode, hard reset, wipe cache , still when i switch it on, it goes in a reboot loop.
tried to use heimdall. cant get sucess as i might not understand how to use it properly
Please help.
Sincere thanks to you if you can help me get my tab up and running., if not in GB atleast back in froyo.
(PS- i im not worried about my data , and i have not backed up the rom etc before doing any of these)

Try to reinstall or install a usb driver from samsung

tried that before , didnt work
anyway now i managed to get it detected on ODIN and flashed it to GB
Libon

Yeah, happened to me too, nearly had a sh*t my pants when Odin didn't recognise my Tab.
I would recommend -
charge the Tab fully using wall adapter (4 hrs+)
plug it in with Odin open and using USB cable
don't expect Odin to recognise the Tab immediately
check back after 5 mins or so (I don't know, does Odin refresh?)
I was able to restore my Tab from the PC - ! - Marvin screen.
I don't want to go back there again though!

yea dude.. same here
i kept it on charge for a couple of hours and then tried.. bam it conencts..
Libon

Tab not turning on
HI Guys I have Galaxy 1000 .I was updating it by using kies in between the process my computer shut down and when I am trying to connect my tab again its not turning on .can some one help me please ?

Waiting no charge baterry 2 3 j
Run odin
Connect tab . Wait Long time 20 30min
Tab is. Détect go flashing
Sorry for my english
I m.. French
Envoyé depuis mon GT-P1000

GT P1000 Odin wont detect
hi guys can you help me on my GT P1000 odin wont detect it even after 2-3hrs. tried everything but odin wont detect my device.
thanks in advance...

iamkakers said:
hi guys can you help me on my GT P1000 odin wont detect it even after 2-3hrs. tried everything but odin wont detect my device.
thanks in advance...
Click to expand...
Click to collapse
do u have samsung kies installed in your pc? if does, kill the kies process (Ctrl+Alt+Del). close, and open odin3, put your tab into download mode, and then plug it into usb port. try to change different ports.
i always had this problems.. if all if that didn't work, i'll format my pc
Sent from my GT-P1000

odin3
hi
i also have a gt p1000 and odin3 doesnt detect the tab. i've been trying to root my tab for a while, tried odin and it doesnt detect, tried doomlord and it doesnt even get past the first step. i tried uninstalling kies on my windows 8 laptop and still no luck im not too sure what to do. is there something that i might be doing wrong because i follow all the info thati get from here.
is there another rooting app i can try that doesnt brick my device? and or is there an app that i can get that i am able to use a ps3 controller on my device that does not require a rooted device. please help
thanks

My Galaxy tab also doesn't connect to usb after cache wiped humber os flash
Thanks in advance guys!..
Earlier I was using Cyanogen mode 10 Custom ROM but has few issues like recognize SD card.
later I flashed to Humber OS caused real problem.
It was clock work recovery installed but my tab tab boots stays on screen humber OS.
It goes to recovery mode, and also to some unknown recovery mode.
Either the way not recognized by computer. I tried all options like heimtal an Odin. No help.
Friends any help, would be highly appreciated.

BUMP
Any solution to this given the fact that usb drivers have been installed?

Are you sure it is recognised by the computer before trying Odin or Heimdall?

I seen this in a post:
#################################################################################
4 Reasons Why Odin is Not Detecting Your Android Device:
Reason 1: No drivers installed for your phone
Most of the time Odin is not able to detect your phone, simply because you haven’t installed the drivers for your phone. Normally windows would automatically download the respective drivers for your phone from the internet and install it. But in case it isn’t able to do so, you need to download the drivers from your phone manufacturer’s website.
Reason 2: Inferior quality or damaged USB cable
Odin is very sensitive to low quality or damaged USB cables, which is a major reason why odin will detect your android phone in file transfer mode but fail to detect it in download mode. You might have a genuine USB cable that came with your Android phone but with time its quality will depreciate, which is why you might have to get a new USB cable.
Reason 3: Odin is corrupted
This happened once with a reader on my blog, we tried everything to solve his problem, but in the end using a different version of Odin worked out for him.
Reason 4: USB port is defective
Defective USB ports can also be a reason for Odin not detecting your Android phone. This was a problem faced by one of my readers and plugging the USB cable in another USB port worked out for him.
#######################################################################
and I need install cwm recovery on a twrp recovery and just do that with this app:
ROM Manager
if you want do same job; you can download it from google play easily!
and install recovery,rom or restore backup with it.

farza(db)astany said:
I seen this in a post:
#################################################################################
4 Reasons Why Odin is Not Detecting Your Android Device:
Reason 1: No drivers installed for your phone
Most of the time Odin is not able to detect your phone, simply because you haven’t installed the drivers for your phone. Normally windows would automatically download the respective drivers for your phone from the internet and install it. But in case it isn’t able to do so, you need to download the drivers from your phone manufacturer’s website.
Reason 2: Inferior quality or damaged USB cable
Odin is very sensitive to low quality or damaged USB cables, which is a major reason why odin will detect your android phone in file transfer mode but fail to detect it in download mode. You might have a genuine USB cable that came with your Android phone but with time its quality will depreciate, which is why you might have to get a new USB cable.
Reason 3: Odin is corrupted
This happened once with a reader on my blog, we tried everything to solve his problem, but in the end using a different version of Odin worked out for him.
Reason 4: USB port is defective
Defective USB ports can also be a reason for Odin not detecting your Android phone. This was a problem faced by one of my readers and plugging the USB cable in another USB port worked out for him.
#######################################################################
and I need install cwm recovery on a twrp recovery and just do that with this app:
ROM Manager
if you want do same job; you can download it from google play easily!
and install recovery,rom or restore backup with it.
Click to expand...
Click to collapse
reason 1: my phone is samsung and it's detected by ODIN, kies and I transfer files from and to my computer without problems. also tried reinstalling just in case but nothing, so I guess this is not the answer for my problem
reason 2: tried with original cable, but as I didn't use the tablet for a long time I also thought it could be the cable, so I asked a friend of mine if he could lend me one cable, but that didn't work. pity. :/
reason 3: tried 3 different versions of ODIN, and in every version my phone (mentioned above) is detected. shame. :S
reason 4: tried the 3 different USB ports in my laptop. two 2.0 USB ports and one 3.0 USB port, so again I doubt this is the reason of my problem.
extra reason: ~~~ maybe it's the OS version ~~~ // this laptop came with windows 8 preinstalled. nothing. then, I updated to win 8.1. again nothing. now I'm running windows 10 and the same, nothing is detected neither by ODIN nor the computer. also tried in 4 different computers running win xp, win 7 and other with win 8.1.
btw, thank you anyway for your apportation; this may help other people, but unfortunately, it's not my case, so can anybody else join me to think about a new reason and a way to solve it? thank you very much :good: :highfive: :fingers-crossed:
~~~~~~~~~~~~ EDIT ~~~~~~~~~~~~
I have continued researching and found a software. it didn't work for me, but maybe it works for other people.
-first, you have to make sure you have java installed on your computer.
-second, extract the oneclick.rar file on an easy-access directory.
-third, put your tab on download mode (while charging icon when tab is turned off, press power + volume down until a yellow triangle appears).
-fourth, click start unsoft-brick and let the magic begin! 8)
note: if a warning error pops up, trust the software and click on resolution center and follow the instructions of one of the three "alternative ways".
download: https://www.dropbox.com/s/8ix6yygu23a1kjn/OneClick.rar?dl=0
good luck!!

help
blizzard_boy said:
tried that before , didnt work
anyway now i managed to get it detected on ODIN and flashed it to GB
Libon
Click to expand...
Click to collapse
hi can you plz help me out with the processess you followed to as im suffring the same problum only CWM working and even it shows sd card mount error also not installing any rom via SD card showing error and odin not detecting it nothing happening only CWM and blank screen

blizzard_boy said:
tried that before , didnt work
anyway now i managed to get it detected on ODIN and flashed it to GB
Libon
Click to expand...
Click to collapse
How did you did it im having the same error???

i did the same thing with my tab exactly like yours plzzzz help me recover it

[Q] unable to root i9000

Hi...
I'm trying to root my i9000 2.3.6 xxjvu...
I'm using odin and i follow the [HOWTO] but odin stuck on setup connection, for hours...
Is somebody able to help me?
Thank you

which version of Odin are you using? maybe try a different version from the one you are using.
Also make sure KIES is not running & kill any KIES processes.

The 1.85 and the 1.82, i also tried on 1.30, and there is no Kies processus running...

what are you trying to flash?
are you flashing the correct file?
try downloading the file again.
try disabling any antivirus/firewalls
are correct drivers installed?
possibly try a different usb port & usb cable?

I'm trying to root it, with CF-Root-XX_OXA_JVU_2.3.6-v4.3-CWM3RFS
I'll try with another usb cable and port...

Another cable and port don't fix it...

Not sure then.
Usual issues are drivers, usb cable, usb port, kies processes running in background, version of odin.
Have you downloaded cf-root again?
If you can try another pc. If that doesn't work then i'm not sure maybe someone else can help.
Sent from my GT-P7500 using Tapatalk 2

Well rooting flashing phone is pretty easy and its easy to find out whats the problem.
Ok when you put in the phone with usb cable and start odin you should see the odin to find your phone.. if it does not its usb driver problem.. I tried to get it working on windows xp and damn its almost impossible to get it working with odin. Using windows 7 it works quite easily. Only once i had to do some driver fighting before odin found my phone..
Just start there and if odin finds your phone it should really work.. You can pm me if I've forgotten this thread and not answering in a day or so. Just tell me whats the problem exacly and what os you are using.
OH AND... if you got a older phone that has not been updated with kies the download mode does not work without the kies update.

Bricked i9001! Help!

I have a problem with a i9001. I tried everything I can think off. It always stops when flashing in Odin 4.43 on:
<1>setup connection.....
I tried 3 different computers and all usb ports. Reinstalled Kies, installed only the samsung drivers. Rebooted several times. But still stops ons setup connection in Odin. I used several flashfiles: the seperate ones and the complete package....
I also used the jig to get the i9001 in download mode. To get the phone in Download mode is no problem, it works with the jig and also with the key combination. When i try to power the phone normal i get the Black Screen of Death. I also tried 4 different usb cables.
Can someone help?
Thanks in advance....

JUST USE THE ONECLICK UNBRICK
http://forum.xda-developers.com/showthread.php?t=1153310
DONT FORGET 2 SAY THX

cabloomi said:
JUST USE THE ONECLICK UNBRICK
http://forum.xda-developers.com/showthread.php?t=1153310
DONT FORGET 2 SAY THX
Click to expand...
Click to collapse
This tool is not for i9001 i think. But thanks anyway.

Help!

Did you try another ROM for flashing? Or did you try to just flash a recovery and boot into that recovery? If you run ODIN with Vista / 7: did you right click and run as administrator? Did you take out the battery of your phone for about 10 min and then insert USB and battery back and try again...?

i had that problem with two phones, my i9000 and my friends rogers infuse. try different usb ports on the computer. if that dont work, look up some stock firmwares for you phone and try to flash them. i find the original stock roms work best for fixing this. just be calm, there is always a way to fix it as long as you dont fry nothing.

wintel_mac said:
Did you try another ROM for flashing? Or did you try to just flash a recovery and boot into that recovery? If you run ODIN with Vista / 7: did you right click and run as administrator? Did you take out the battery of your phone for about 10 min and then insert USB and battery back and try again...?
Click to expand...
Click to collapse
I tried 5 different computers (Windows XP and Windows 7), 5 different usb cables, several flashfiles. Always stops at setup connection.

I am still having the problem. i really tried everything I can find.

Have you installed the USB drivers for your phone? It is also important to kill ANY running KIES application/service via task manager.
Sent from my GT-I9000 using XDA

I have exactly the same problem... Does anyone figured it out how to fix it?

Everything you should try first is written above ur post

Ajoslaf said:
Everything you should try first is written above ur post
Click to expand...
Click to collapse
Well, I'd install the drivers and I don't even have kies installed... but I'm still stuck at the SetupConnection step!

H83 said:
Well, I'd install the drivers and I don't even have kies installed... but I'm still stuck at the SetupConnection step!
Click to expand...
Click to collapse
look at My Android solutions link below, you need to use task manager to kill KIEs related files when running ODIN

[Q] S-5830L not recognized by PC

I'm trying to connect my S-5830L to my PC, and when I do, the phone charges, but there is no option to access mass storage.
It's recognized in Kies, I even update the phone with it, and a hidden removable disk appears when I connect the phone, yet I still can't access the storage.
I tried installing both the driving independently and via Kies.
There is no notification about it in the phone, and I have USB debugging turned on, and I also tried with it off
Anyone knows what I could be doing wrong?

ZeroAE said:
I'm trying to connect my S-5830L to my PC, and when I do, the phone charges, but there is no option to access mass storage.
It's recognized in Kies, I even update the phone with it, and a hidden removable disk appears when I connect the phone, yet I still can't access the storage.
I tried installing both the driving independently and via Kies.
There is no notification about it in the phone, and I have USB debugging turned on, and I also tried with it off
Anyone knows what I could be doing wrong?
Click to expand...
Click to collapse
Was the USB Mass Storage working earlier in your PC? What rom do you use? Is your phone rooted?

mahithm said:
Was the USB Mass Storage working earlier in your PC? What rom do you use? Is your phone rooted?
Click to expand...
Click to collapse
No, a guy I know passed me this phone, and I haven't be able to use the mass storage since the beginning. It's using stock (in fact, I just updated it via Kies), I have never tweaked it before. And no, it seems it isn't rooted.

ZeroAE said:
No, a guy I know passed me this phone, and I haven't be able to use the mass storage since the beginning. It's using stock (in fact, I just updated it via Kies), I have never tweaked it before. And no, it seems it isn't rooted.
Click to expand...
Click to collapse
Go to Recovery Mod and do a "Wipe Data/ Factory Reset" & "Wipe Cache Partition". That should pretty much solve the issue. But if the issue still exists, try flashing the stock rom using odin. Here is the link on how to install stock rom using odin along with all firmwares,
Flash stock rom on Samsung Galaxy Ace S5830 using odin
Once installed, go to Recovery Mod and do a "Wipe Data/ Factory Reset" & "Wipe Cache Partition" (otherwise bootloop might occur). Then restart. Now you have successfully flashed the stock rom. Here is the link for rooting and installing CWM 5 on Samsung Galaxy Ace,
How To Root and Unroot Samsung Galaxy Ace?
CWM 5.0.2.6 fix for Samsung Galaxy Ace S5830
Do post your results. Hope I Helped

It appears I'll have to flash the stock rom, since wiping the data and cache didn't work.
But does it matter which version of ODIN I use?
The one I'm supposed to use doesn't recognize the phone, but the one I used for the Galaxy S4 and S2 do recognize the phone.

might be problem with your samsung mobile driver on your pc.
I have faced same problem.
connect your mobile to pc right click on my computer icon go to manage-device manger
check whether driver is working if not try to reinstall it

ZeroAE said:
It appears I'll have to flash the stock rom, since wiping the data and cache didn't work.
But does it matter which version of ODIN I use?
The one I'm supposed to use doesn't recognize the phone, but the one I used for the Galaxy S4 and S2 do recognize the phone.
Click to expand...
Click to collapse
I completely agree with @amtdwan. It's most probably the drivers that's causing the problem. Updating/ reinstalling it will solve it

I removed the ones that Windows install automatically, and reinstalled the Kies ones, but each time I connect the phone to my PC, Windows install the drivers again.
Is that a problem?
Also, the USB utilities setting is greyed out. And I can't seem to open the file explorer with Kies, it says "drive not valid".

ZeroAE said:
I removed the ones that Windows install automatically, and reinstalled the Kies ones, but each time I connect the phone to my PC, Windows install the drivers again.
Is that a problem?
Also, the USB utilities setting is greyed out. And I can't seem to open the file explorer with Kies, it says "drive not valid".
Click to expand...
Click to collapse
BTW does "Turn on USB Storage" pop up now in your phone when you connect it to PC? If yes click it, then can you try opening using Windows file explorer rather than Kies? Do post the result. Hope I Helped

mahithm said:
BTW does "Turn on USB Storage" pop up now in your phone when you connect it to PC? If yes click it, then can you try opening using Windows file explorer rather than Kies? Do post the result. Hope I Helped
Click to expand...
Click to collapse
Nope, it doesn't =(

ZeroAE said:
Nope, it doesn't =(
Click to expand...
Click to collapse
Which version of odin are you using?

mahithm said:
Which version of odin are you using?
Click to expand...
Click to collapse
I'm trying to use 'Odin Multi Downloader V.4.42", but it doesn't recognize the phone.
But when I try to use Odin3 V1.85 or Odin3 V3.09, it recognizes it.

ZeroAE said:
I'm trying to use 'Odin Multi Downloader V.4.42", but it doesn't recognize the phone.
But when I try to use Odin3 V1.85 or Odin3 V3.09, it recognizes it.
Click to expand...
Click to collapse
Each device has its own odin. For Samsung Galaxy Ace S5830, the most stable odin is S5830 Odin Multi Downloader v4.38. You can find this in the link mentioned previously. I will provide the same the link again. Go to the "Preparation" section where you will find all the necessary downloads including the drivers.
Flash stock rom on Samsung Galaxy Ace S5830 using odin
Can you try this version of odin with the drivers mentioned above and see if it works? Do post the results. Hope I Helped

mahithm said:
Each device has its own odin. For Samsung Galaxy Ace S5830, the most stable odin is S5830 Odin Multi Downloader v4.38. You can find this in the link mentioned previously. I will provide the same the link again. Go to the "Preparation" section where you will find all the necessary downloads including the drivers.
Flash stock rom on Samsung Galaxy Ace S5830 using odin
Can you try this version of odin with the drivers mentioned above and see if it works? Do post the results. Hope I Helped
Click to expand...
Click to collapse
I was able to flash the phone using your steps, but it still doesn't open in explorer.
I guess I'm giving up, since nothing I've tried worked.
Thanks anyways, mahithm.

ZeroAE said:
I was able to flash the phone using your steps, but it still doesn't open in explorer.
I guess I'm giving up, since nothing I've tried worked.
Thanks anyways, mahithm.
Click to expand...
Click to collapse
So does "Turn on USB Storage" pop up now in your phone when you connect it to PC? Did you use the firmware from the site I mentioned? This problem could be caused if you have a faulty firmware. Also make sure you have a working sdcard. Sometimes faulty sdcard also cause such errors. Last but no the least, you can use the USBMassStorage app I developed. For it to work, you need a rooted phone. I'll provide you all the necessary link. Don't forget to read all the guidelines before using the app.
How To Root and Unroot Samsung Galaxy Ace?
CWM 5.0.2.6 fix for Samsung Galaxy Ace S5830
USBMassStorage App for Samsung Galaxy Ace S5830
I hope this solution works. Also we at XDA Developers are always happy to help our fellow comrade in trouble

does your pc shows
device is not recognize by windows

Help required: Galaxy Tab

I've been searching XDA & Google for about 1 month but can't find a solution. I don't know why everywhere in some threads whenever somebody asks the same problem there's no reply to that question. So I decided to post this question here to try my luck...
Problem & History:
I tried to root my Samsung Galaxy Tab GT-P1000R with DoonLord V_4, it couldn't root it but left the tab with touch problem then I tried to root it with famaroot various versions, I then again tried to root it with z4root V_1.3.0, all attempts were useless, I don't know which attempt of them, made my tab unable to connect to pc even in download mode.
When I set my tab to connect to Kies or Media it shows that it's connected but PC doesn't detect it. Please help...
Tab Specification:
Samsung Galaxy Tab GT-P1000 (Rogers)
Firmware Version: GB 2.3.6
Baseband Version: P1000XXJR2
Kernel Version: 2.6.35.7 ([email protected] #2
Build Number: GINGERBREAD.XXJU2

Hi adilpal, go to the first post here http://forum.xda-developers.com/showthread.php?t=1881981

Thanks!
mr.natural said:
Hi adilpal, go to the first post here http://forum.xda-developers.com/showthread.php?t=1881981
Click to expand...
Click to collapse
Thanks for your reply but I have already gone through this post but as I mentioned problem is that PC doesn't detects it even when I put the Tab in DL mode. Is there any method to root it? So that I could use Mobile Odin to restock it.

It is an usb-driver problem and not rooting, I'm 99% sure of it. It's the PC that HAS to find the Tab first.

Hmmmm
mr.natural said:
It is an usb-driver problem and not rooting, I'm 99% sure of it. It's the PC that HAS to find the Tab first.
Click to expand...
Click to collapse
I've tried on another PC and with another USB cable but in vain. Other Smartphones connect it without any problem.

Any smartphone or the P1000 are not the same. I have had on multiple occasions that even Samsung Kies did not recognise it and had to reinstall Kies. Same for the Samsung Mobile phones drivers. And don't forget to reboot your PC after installing drivers.
Keep on trying because it is still going into download mode and logic tells it should be accessible. Does the PC give a notification like driver not found or similar?

NO.
mr.natural said:
Any smartphone or the P1000 are not the same. I have had on multiple occasions that even Samsung Kies did not recognise it and had to reinstall Kies. Same for the Samsung Mobile phones drivers. And don't forget to reboot your PC after installing drivers.
Keep on trying because it is still going into download mode and logic tells it should be accessible. Does the PC give a notification like driver not found or similar?
Click to expand...
Click to collapse
No. There's no activity in PC when I connect it. It neither shows new hardware found nor any other notification like unrecognized device etc.
BTW I have reinstalled Kies, updated it, uninstalled it, installed separate drivers for Samsung USB but no gain...

One last option, let the battery become completely empty (0% charge). Recharge and try again, it rescued my tab once after a bad flash.
That is to my knowledge the last resort.

Alas!
mr.natural said:
One last option, let the battery become completely empty (0% charge). Recharge and try again, it rescued my tab once after a bad flash.
That is to my knowledge the last resort.
Click to expand...
Click to collapse
It didn't help...

adilpal said:
It didn't help...
Click to expand...
Click to collapse
What version of windows are you on? Because windows 8 is a *****, Vista or 7 should work.
(Or GNU-Linux). And have you tried Heimdall already? http://forum.xda-developers.com/showthread.php?t=1323527
Heimdall download https://code.google.com/p/heimdall-one-click/downloads/list

Get a stock ROM and how to use Heimdall (these are old instructions so there could be newer versions available).
-----------Heimdall install instructions ------------------
1. Download Heimdall.
2. Download Microsoft Visual C++ 2010 Redistributable Package (x86) and install it. Download it here List All Devices.
5. From the USB Device list chose "Samsung USB Composite DEvice".
6. Press "Install Driver", click "Yes" to the prompt and if you receive
a message about being unable to verify the publisher of the driver
click "Install this driver software anyway".
7. Done. This only needs to be done once.
-----------How to use Heimdall-------------------------
1. Put your tab into download mode - Power off Tab, once powered down hold power and the volume down button at the same time. You will see a android digging.
2. Start Heimdall
3. Hook your tab up to your PC or MAC and you will see a progress bar. That must say Ready to get heimdall to work.
4. Find you Firmware and unzip it until you see the following files below.
(NOTE: when you first unzip your firmware it may unzip into a .tar file unzip the .tar file to get the files below.)
a. Zimage
b. FactoryFS.rfs
c. Param.lfs
d. Boot.bin
e. SBL.bin - not always included
f. cacher.rfs
g. dbdata
h. modem.bin - not always included
5. Place each of those files in their correct spot and hit start.
ONE BIG NOTE: if you use a PIT file do NOT select repartition. It might brick your tab as heimdall has a problem when selecting repartition w/ a pit file. It is ok to use the pit file just make sure repartition is unchecked.
(Use ODIN for repartition with pit)

Got it working...
Thanks buddy, I bought a half dozen of USB cables for the tab and got it working with one of them at last... I don't know but I thought it was the last way out to try different cables... And at last, I got it working after long...
Please let me know the correct way of rooting, as DoomLord v. 4 has already failed to root it. Please guide if possible... I have a Ragers (Canada) Tab. GT-P1000R