Database Develop

[Q] How to start over?

I'm not sure whats going on with my D3. However, I have RSD and I have .890 and .959 downloaded as well as Fastboot.
What I want to do is just wipe the phone completely and just flash it like its a brand new phone.
Anyone know how to do so? Please post a link or instructions, I would greatly appreciate it.

atquick said:
I'm not sure whats going on with my D3. However, I have RSD and I have .890 and .959 downloaded as well as Fastboot.
What I want to do is just wipe the phone completely and just flash it like its a brand new phone.
Anyone know how to do so? Please post a link or instructions, I would greatly appreciate it.
Click to expand...
Click to collapse
http://goo.gl/7NoAv

Androidsims said:
http://goo.gl/7NoAv
Click to expand...
Click to collapse
Tried that. It keeps failing saying something about size was not as expected or something like that.

Redownload?

Avelnan said:
Redownload?
Click to expand...
Click to collapse
I have. MD5 sums match up each time. Should I try removing the ext sd card?

I would redownload everything and try agian

littleneutrino said:
I would redownload everything and try agian
Click to expand...
Click to collapse
Alright, attempt will be made again. Should I redownload RSD again or just the sbf's?

atquick said:
Alright, attempt will be made again. Should I redownload RSD again or just the sbf's?
Click to expand...
Click to collapse
Downloading the sbf's again. Went over to check and see if the phone was still on, The charging led is on, however the screen is off..
Held power, nothing. Held M + Power. Still nothing... Any thoughts on whats going on now?

I didn't see if you have pulled the SD card but yeah it can't hurt.
Sent from my DROID3 using XDA App

http://forum.xda-developers.com/showthread.php?t=1278056
Follow the first portion of the instructions on how to flash back to original 5.6.890. Note the making of a folder and it's name for the 890 flash.
Ignore the part about flashing the new ROM. These are the best instructions I've found so far for flashing back to stock via RSD lite.
Good luck, keep us posted.
Download and follow exactly and you'll be good to go.
Hope that helps.
Sent from my DROID3 using xda premium

wattnxt said:
http://forum.xda-developers.com/showthread.php?t=1278056
Follow the first portion of the instructions on how to flash back to original 5.6.890. Note the making of a folder and it's name for the 890 flash.
Ignore the part about flashing the new ROM. These are the best instructions I've found so far for flashing back to stock via RSD lite.
Good luck, keep us posted.
Download and follow exactly and you'll be good to go.
Hope that helps.
Sent from my DROID3 using xda premium
Click to expand...
Click to collapse
It keeps failing.
Step 3 mbmloader.bin
Step 4 mbm.bin
Step 8 logo.bin
Step 9 'lbl'
I'm stuck.

Let me do some looking when I get home tonight. I remember there being a file for certain versions of XP that helped some people and they couldn't flash without it.
I never had it happen personally, but I know those that did were terribly frustrated.
I also hear the 959 version is easier to flash for some reason. Never flashed that version, so this is only hear-say. But I know it did flash easier according to posts.
I will try to dig up a link for you.

i am getting the same thing also getting the bad CG boot.. now this may be a fix but idk how this guy got it it.. i have been asking eveywhere maybe you guys could help me... here is the thread http://forum.xda-developers.com/showthread.php?t=1248721

I found this by Psouza. He is likely the foremost expert on making things easy as far as unbricking your D3. Rumor has it he has a set of unbrick tools floating around this forum somewhere, though I haven't found it yet. Try in the Development thread, for sure it has to be there somewhere.
Post number 84
psouza4 said:
For those of you having problems flashing this and/or are suspicious of flashing ebr, mbr, and parts of the bootloader, you can selectively just flash the rest of it.
See attachment.
Click to expand...
Click to collapse
http://forum.xda-developers.com/attachment.php?attachmentid=715510&d=1315657647
Hope this helps.
I also saw that flashing the pre-installs file alone first helped someone. That file borked on me once, but I was able to adb it over and then execute it via adb to get my phone unbricked.
Please let us know what works for you, as all of this is a work in progress right now.
Good luck!

i don't know to much about adb and are looking for help on pre-installed files. I don't understand what that means or how to go about it? i also cant get past the bootloader screen, "invalid CG version". i can not boot up at all.

How bricked are you? can you boot into CWM? Are you able to boot into tools, or how far can you get?
What version were you running? 5.959 (stock) or 6.890 OTA or Leaked OTA or Soak test (all the same as far as 6.890 goes).

i can get into boot tools and just tryed another flash got to step 6 till it failed instead of 3.. I'm running stock. Cannot get passed boot tools... scratch all that just tried to flash again just on the off chance it mnight work and i got it. Going to try and re-root and CWN recovery with sdteel froids rom... will keep you in the loop

Awesome!!
Here is the link about the adb commands for preinstall.sh
http://forum.xda-developers.com/showpost.php?p=17196391&postcount=88
It helped me when I borked my leaked update. I ran into the same problem as limaxray did with too many files in /system. So make sure you clean out any apps you made into system apps before trying the update via the standard update route, and that all stock system apps are in place and properly named.
I had to remove some that updated partially with the leaked update when mine borked. I used the posted system dump to push them to the phone and then the update ran properly and updated them anyhow.
If for some reason re-rooting doesn't work for you. Go to /system/bin and remove su, busybox. Do the same in /system/xbin. For some reason if you already have them in there when you run the process, it will say success but no root after reboot. My 2c as it happened to me. You do not need to remove superuser.apk, but you will have to update it in the market after you re-root.
Congrats!!
I see now too there is a fastboot and moto-fastboot. moto-fastboot has worked for some who had issues from what I've found.
Keep us posted, and smile knowing you've recovered from a bork; none of us got where we are without doing it at least once, so you're in good company.

re-rooted and installed bootstrap, just got steel droid all loaded up and all is good.... thanks for your speedy responses and detailed instructions and links. I realy think all that happened was i took everything aet it sone last time tried to flash and it went threw. All i used was RSD lite and flashed the 8.6.590 fast boot file and after a several retries it went threw. If anyone needs help on this i will post the file links if you need the ones i used

RAZR recovery on Droid 4?

Anyone tried using the RAZR recovery on the Droid 4? Lookin to do up the Arctic rom, but would feel much better if I could get a nandroid.
EDIT: This is the link to the RAZR recovery I was mainly thinking of: http://forum.xda-developers.com/showthread.php?t=1385283

jgardner said:
Anyone tried using the RAZR recovery on the Droid 4? Lookin to do up the Arctic rom, but would feel much better if I could get a nandroid.
EDIT: This is the link to the RAZR recovery I was mainly thinking of: http://forum.xda-developers.com/showthread.php?t=1385283
Click to expand...
Click to collapse
Why not do the nandroid with safestrap?

I didn't think safestrap was working with the D4?

jgardner said:
I didn't think safestrap was working with the D4?
Click to expand...
Click to collapse
I dont know whats going on lol.....everyone is coming with all these different stories. I used the root exploit that was out and used the safestrap for recovery. I dont think I did anything different than anyone else. And then i took a chance flashing a Razr rom

Oh yeah, the original utility had the safestrap didn't it? The latest utility doesn't anymore (although I think it works).
Sent from my DROID4 using Tapatalk

jgardner said:
Oh yeah, the original utility had the safestrap didn't it? The latest utility doesn't anymore (although I think it works).
Sent from my DROID4 using Tapatalk
Click to expand...
Click to collapse
I took it out until Hashcode brings it out for Droid 4. I've been corresponding with him and if the maker of Safestrap tells you it isn't safe to use on Droid 4 yet then you usually should listen.
All up to your risk though.

I made a nandroid using safestrap, or thought i did. I made my backup so i figured i would try that arctic rom so i followed the directions step by step. After i wiped cache and factory reset i went install from sd and the arctic rom that i know i put on it was not there. So i figured i would flash back to the backup i just made and try the process of putting the arctic on my sd. Some how i ended up bricking my phone and am now stuck in bootloader and my device is looked. Have you or anyone else made an sbf, oneclick recovery or a way to unbrick my D4?

Briteyez83 said:
I made a nandroid using safestrap, or thought i did. I made my backup so i figured i would try that arctic rom so i followed the directions step by step. After i wiped cache and factory reset i went install from sd and the arctic rom that i know i put on it was not there. So i figured i would flash back to the backup i just made and try the process of putting the arctic on my sd. Some how i ended up bricking my phone and am now stuck in bootloader and my device is looked. Have you or anyone else made an sbf, oneclick recovery or a way to unbrick my D4?
Click to expand...
Click to collapse
Not yet. There is a reason we have warnings on these...
I hope we get fastboot yet. You cannot just "make them" they have to be leaked.
FYI Motorola does Fastboot files, not SBF now.

mattlgroff said:
Not yet. There is a reason we have warnings on these...
I hope we get fastboot yet. You cannot just "make them" they have to be leaked.
FYI Motorola does Fastboot files, not SBF now.
Click to expand...
Click to collapse
Im new to root even though i have learned pretty quick. Finally after much pain and suffering got my X's bootloader unlocked and rooted some time in Nov. What does leaked mean and what is the difference between fastboot files and sbf?
---------- Post added at 02:27 AM ---------- Previous post was at 02:24 AM ----------
As far as the warnings i didnt see the warning to not use safestrap till i got on here and it was to late. I figured since i was able to boot into recovery and make a backup i would be ok

Briteyez83 said:
Im new to root even though i have learned pretty quick. Finally after much pain and suffering got my X's bootloader unlocked and rooted some time in Nov. What does leaked mean and what is the difference between fastboot files and sbf?
Click to expand...
Click to collapse
You would be Man of the Year if you did that. You mean you bootstrapped it, right?
Leaked means they have to trickle out from Motorola/Verizon somehow.. either on purpose or by "accident" somebody on the inside putting them out there for use by our wonderful devs.
As for SBF vs fasboot, i dont know exactly the difference but think of them as different types of "recovery" that can be used to fully restore your phone to factory condition.

Briteyez83 said:
I made a nandroid using safestrap, or thought i did. I made my backup so i figured i would try that arctic rom so i followed the directions step by step. After i wiped cache and factory reset i went install from sd and the arctic rom that i know i put on it was not there. So i figured i would flash back to the backup i just made and try the process of putting the arctic on my sd. Some how i ended up bricking my phone and am now stuck in bootloader and my device is looked. Have you or anyone else made an sbf, oneclick recovery or a way to unbrick my D4?
Click to expand...
Click to collapse
Which FASTBOOT error are you seeing? It should be referencing one of the partitions.
Sent from my DROID4 using XDA App

greekchampion04 said:
You would be Man of the Year if you did that. You mean you bootstrapped it, right?
Leaked means they have to trickle out from Motorola/Verizon somehow.. either on purpose or by "accident" somebody on the inside putting them out there for use by our wonderful devs.
As for SBF vs fasboot, i dont know exactly the difference but think of them as different types of "recovery" that can be used to fully restore your phone to factory condition.
Click to expand...
Click to collapse
Yes, i mean bootstrapped and you mean woman of the year, right? My bf said the difference between the two is SBF your makinga mirror image of everything and doing a complete system dump and fastboot is just cutting the power for a split sec. It will clear your immediate cache but some memory is still there.

Briteyez83 said:
Yes, i mean bootstrapped and you mean woman of the year, right? My bf said the difference between the two is SBF your makinga mirror image of everything and doing a complete system dump and fastboot is just cutting the power for a split sec. It will clear your immediate cache but some memory is still there.
Click to expand...
Click to collapse
I cant help unless I know what your error message says when you turn on the phone. :/
Sent from my DROID4 using XDA App

Send me your email addy in a message and ill send you a pic of it

Briteyez83 said:
Send me your email addy in a message and ill send you a pic of it
Click to expand...
Click to collapse
Ok, so it's WEBTOP that is behaving badly.
Let me see if I can get an RSD Lite file for you to try. Do you know how to use that?

Hashcode said:
Ok, so it's WEBTOP that is behaving badly.
Let me see if I can get an RSD Lite file for you to try. Do you know how to use that?
Click to expand...
Click to collapse
No, i dont. Im new to root, just rooted in nov. If you give me something thst would fix it that would be awesome.

Unfortunately, the fix isn't exactly a simple one.
It comes in 3 parts (assuming you're on Windows):
1. You'll need to download and install RSD Lite which is what is used to flash the fastboot restore files from Motorola:
http://dev-host.org/ug07spima1mq/RSDLite5.5.rar
2. Download and install the Motorola USB drivers to recognize your phone in fastboot mode:
http://www.mediafire.com/?z5qpc8v3xza25e6
3. I'm setting up a mini WEBTOP fastboot restore file based on the latest RAZR fastboot files (I say small.. but it's still quite a large download). The version is slightly off from the D4's but it might be close enough, and I think it's worth a shot:
[ Getting this file setup will take me about an hour, but you can get steps 1 and 2 ready for now ]
ALSO KEEP THE PHONE POWERED OFF FOR NOW TO SAVE BATTERY. FASTBOOT WILL NOT PROGRAM WITH A LOW BATTERY.

Hashcode said:
Unfortunately, the fix isn't exactly a simple one.
It comes in 3 parts (assuming you're on Windows):
1. You'll need to download and install RSD Lite which is what is used to flash the fastboot restore files from Motorola:
http://dev-host.org/ug07spima1mq/RSDLite5.5.rar
2. Download and install the Motorola USB drivers to recognize your phone in fastboot mode:
http://www.mediafire.com/?z5qpc8v3xza25e6
3. I'm setting up a mini WEBTOP fastboot restore file based on the latest RAZR fastboot files (I say small.. but it's still quite a large download). The version is slightly off from the D4's but it might be close enough, and I think it's worth a shot:
[ Getting this file setup will take me about an hour, but you can get steps 1 and 2 ready for now ]
ALSO KEEP THE PHONE POWERED OFF FOR NOW TO SAVE BATTERY. FASTBOOT WILL NOT PROGRAM WITH A LOW BATTERY.
Click to expand...
Click to collapse
Thank you so much. My bf is leaving his laptop here so that i can do this since he is building the main cpu right now. Ill makev sure i let you know if this works or not after ive finished. I was going to have verizon send me a new one since i just bought my D4 on the 17th and i have 14 days. But i just dont want to risk my warrenty getting voided. Once again thank you.

Briteyez83 said:
Thank you so much. My bf is leaving his laptop here so that i can do this since he is building the main cpu right now. Ill makev sure i let you know if this works or not after ive finished. I was going to have verizon send me a new one since i just bought my D4 on the 17th and i have 14 days. But i just dont want to risk my warrenty getting voided. Once again thank you.
Click to expand...
Click to collapse
If it works, I'll create a new thread with the instructions as I believe there are a few in your situation.

Yes there is quite a few. Ill let you know as soon as i can

[Q] Got five days to fix this,Please help

Ok I know there is a lot of post like this but I only got 5 days to fix this,I have rooted my phone,i have put a ROM on it, then unrooted the phone to fix a problem i was having with the phone.So all was fixed root was back on then my phone locked up,the only thing I could get to is fastboot,I looked all over the web and every form i could find to fastboot stock ROM back on my phone,either gave a me a no good link or the file was not working on the phone or there is a bigger problem with the phone than i think,pleas help me,
The phone I have is the Droid Bionic
I whent to recovery and did a rest on the phone,every thing came on ok but no 3g/4g net work and can not get the OTA up date,Power the phone off and turn it back on it goes to fastboot

Download RSDlite 5.6
http://forum.xda-developers.com/attachment.php?attachmentid=784077&d=1321414457
Make sure your drivers are up to date.
http://api.viglink.com/api/click?fo...5.2.1 64-bit&jsonp=vglnk_jsonp_13160433711795
Then FXZ through RSDlite to stock 902.
http://www.fileserve.com/file/M7822Z4/VRZ_XT875_5.9.902.XT875.Verizon.en.US_CFC_01.xml.zip
You must be in AP Fastboot to do so.
(Make sure your phone is charged because if it dies while flashing this, you will have a very expensive paperweight....forever)
You will then be able to root without problems.
This may help.
http://forum.xda-developers.com/showthread.php?t=1455888

Thank you I will give it try

skee43229 said:
I did use Google I have RSD LITE 5.6 but every FXZ file i find the link is gone or if i can find a good link and down load it, it will not flash to my phone , it fails after step 3 of the 15, so i don't know if its the phone or if it was a bad file.
Click to expand...
Click to collapse
Check my updated post
Liiiinnkkkksss RAWRRR
Edit: Just checked and I was able to download the 902 fxz from that link.

Help with going back to stock

My wife has a Droid 3. She's had it for a year and just recently had some problems. Long story short, we ended up getting a warranty like new replacement phone. I need to put the old phone back to stock. I'm not too familiar with Motorola phones (I mainly own and work with Samsung Androids). I've been looking through threads but am having a tough time making heads or tails of how to put this thing back to stock. Some of the threads I've found are a little older with outdated links. Can someone please point me in the right direction here with some good directions? Thanks much!

SOTK said:
My wife has a Droid 3. She's had it for a year and just recently had some problems. Long story short, we ended up getting a warranty like new replacement phone. I need to put the old phone back to stock. I'm not too familiar with Motorola phones (I mainly own and work with Samsung Androids). I've been looking through threads but am having a tough time making heads or tails of how to put this thing back to stock. Some of the threads I've found are a little older with outdated links. Can someone please point me in the right direction here with some good directions? Thanks much!
Click to expand...
Click to collapse
quickest and easyest is to sbf..
first go to settings/about phone and see what the system version is... .890 or .906
the clcick the link in my sig..
if your on. 890 download the. zip at the top of the thread and install that using rsdlite
if your on. 906 download the 1click .exe file and follow the directions..

ovelayer said:
quickest and easyest is to sbf..
first go to settings/about phone and see what the system version is... .890 or .906
the clcick the link in my sig..
if your on. 890 download the. zip at the top of the thread and install that using rsdlite
if your on. 906 download the 1click .exe file and follow the directions..
Click to expand...
Click to collapse
Thanks, much! That worked like a champ and was exactly what I was looking for!

I may have spoke too soon; it just stays at the Motorola Dual Core boot image. Maybe I am not waiting long enough? I waited for like 9 minutes and no booting. I used the one click after checking the version. In the script, I got "okays" for everything. The phone rebooted. Everything seemed to go fine. So, not sure what's up. As I said, maybe I didn't give it enough time?
Sent from my Galaxy Nexus using Tapatalk 2

SOTK said:
I may have spoke too soon; it just stays at the Motorola Dual Core boot image. Maybe I am not waiting long enough? I waited for like 9 minutes and no booting. I used the one click after checking the version. In the script, I got "okays" for everything. The phone rebooted. Everything seemed to go fine. So, not sure what's up. As I said, maybe I didn't give it enough time?
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
Seems like it soft bricked ( which is fixable ).
Im just a lurker so im not sure how to fix lol

[Q] How to restore droid 4 to stock firmware

First i'd like to say i hope im posting this in the correct forum.
I got a second hand verizon motorola droid 4 xt894 that has been rooted i was going to have it flashed to be put on Page plus carrier. But first i need to have it put back to stock. I have tried to use this method on http://forum.xda-developers.com/showthread.php?t=1623997. When Rsd lite is running the decompress and flash it failed at 14/18 now it fails at around 3/18 just wondering if someone could help me out to get this problem fixed would be greatly appreciated thanks.

ackabim2012 said:
First i'd like to say i hope im posting this in the correct forum.
I got a second hand verizon motorola droid 4 xt894 that has been rooted i was going to have it flashed to be put on Page plus carrier. But first i need to have it put back to stock. I have tried to use this method on http://forum.xda-developers.com/showthread.php?t=1623997. When Rsd lite is running the decompress and flash it failed at 14/18 now it fails at around 3/18 just wondering if someone could help me out to get this problem fixed would be greatly appreciated thanks.
Click to expand...
Click to collapse
Try unzipping the file and RSDlite flashing the uncompressed files. I had a similar issue flashing my Droid 4 with the compressed .zip file but was able to successfully flash the uncompressed files with no issue.
Unzip to a folder, browse to that folder and select the .xml file and it'll pull the files as needed without having to also uncompress them.