Related
Tried to flash button rom with full battery. Comunication error. Only boots to 3 color bars. Every time I retry the flash the phone starts flashing on and off.
Mmmmmm
What is the problem....?
Does your wizard dont begins... so it wont wake up... dont start ?
You cant turn it on?
What do you mean with turn on and off?
is blinking?
If the problem is its blinking and dont stands on... it is a serios problem but if the wizard saty on ... what ipls and spl got?
What did you do?
Men we need to much info..... than it is on bootloader, i cant upgrade etc etc etc.
FUUUUUUU******@@@@@
while flashing the button rom, i got a communication error. At random times after connecting the phone via usb the screen flashes on an off and communication is lost. sometimes the phone gets mostly through the flash, sometimes it wont even start to flash. But here is the f-ing kicker, while trying to recover in the button flasher proggie, my computer locked up and WILL NOT TOUR BACK ON. thats right, i lost my phone and computer in 5 minutes thanks to this flasding sh*t. i am only able to access this forum via a blackjack II smartphone.
OK, Feeling better
Sorry about that.
I got my computer back on.
It wouldnt even go to cmos so I traded out my cpu, still didnt work.
Put the old cpu back in and it booted just fine. Not sure why that happened but at least my computer is back on.
Ok so back to the phone. It boots to the 3 color bar screen and shows IPL/SPL as 2.25. After connecting the USB cable it will sometimes start flashing, not always. If I restart the button rom flasher it will start to flash, after getting to some % the phone starts flashing.
By flashing I mean the screen flashes on and off. Likely the phone is rebooting itself constantly.
Undo?
Is it possible to just undo what ive done? Is the old info still on the phone? IPL/SPL are still the same as before.
No, your old info is not on the phone anymore. The first thing that is done when the flashing process begins is deletion of your flash on your phone. This may seem like a n00b question, but have you tried using a different USB port? DO NOT flash with a port off of a hub, they are usually under powered when compared to direct board connected ports. Try one on the back of your tower(or directly in your notebook whatver.) and see if that works.
It also failed on the back usb port.
All is not lost is it?
I believe that this phone might need a new battery.
I had some problems with the phone turning off when it wasn't supposed to but it hasn't done it in a long time so I though I was ok. Do you think that a new battery might allow this downgrade to complete?
Its possible. The Wizard is kind of a tempermental device....it flashes when it wants to some time. You can try and see if a new battery is what fixes the problem, but in all honesty, it could be anything.
Xtrange
ok
try to get connecte with that cable other device, maybe is broken the cable...
try another usb port...
download again the button rom, maybe is corrupted.
lets wait what happen
Its your battery , replace the battery and it will charge and then you can flash it,you can get two batteries for a tenner on ebay
Battery
OK, so once the new battery comes, it will charge via usb and wall charger just as it would with the OS installed? Im not sure if charging is dependent on the OS at all.
Thanks for all of your help guys.
Does it charge?
It charges??????
in bootloader dont charge men....
if the phone stuckson welcome screen maybe charges, on htc logo dont, neither on splash screen.
All we do is try to help people to upgrade and try to found solutions for those who made a bad upgrade, but i didn't cook, and dont develop anything so my only contribution is for experiences.
Hope your wizard revives.
My wizard does not bootup...only three color bars
I was trying to flush with new ROM and it stopped after 100% and in the mean times, my system rebooted. Now I got this MDA with three color bars, battery is OK but important thing is that it does not connect to computer thru Active Sync............any help>
Okay, so as far as I am able to find... This problem is pretty unique...
I'm running Cognition 4.5.3 with no software issues. I have had this problem since Cog 3...
Most people have trouble getting their phone to boot into download mode, but NOT ME!
My phone randomly (I can find absolutely no cause or trigger and I'm not really a novice at Android) will shut itself off. Now normally I would not have an issue with this, but when I go to turn the phone on... it boots straight to download mode, and no key combo or anything will avoid it. So I have been testing this out and I can reboot the phone from the enhanced power menu, I can boot into Recovery from enhanced power menu... But when the phone shuts off or when I shut it down, the ONLY way that I can get it to power on correctly, is to plug the phone in and wait for it to show that the phone is charging. Then I can power it on normally...
Now, this issue arose the same time that my phone began to refuse to be recognised when plugged into a computer via USB... and at times the USB debugging and USB connected notifications will remain in the notification bar until I reboot the phone...
Naturally, my first instinct was to try and restore to stock... But since no computer will recognize my phone (even with fresh drivers installed) I cannot use odin to flash to stock.
So to summarize my problems:
1. My phone will not be recognized by a computer. (USB device not recognized)
2. My phone randomly shuts itself off. (Not a big deal, I can live with that)
3. My phone ONLY boots into download mode unless plugged into the charger (Incredibly frustrating when I am not at home or I don't have my car charger)
4. USB debugging and USB connected notifications stick around until phone is rebooted. (Using enhanced power menu. Again, I can live with this minor annoyance)
have you tried reflashing that rom...or trying another?
it could be the random shutdown issue that some cappys have paired with a failing usb port.
try changing roms.
studacris said:
have you tried reflashing that rom...or trying another?
it could be the random shutdown issue that some cappys have paired with a failing usb port.
try changing roms.
Click to expand...
Click to collapse
Hehe... I tried a different rom for two weeks and had similar and/or more problems...
Reflashing doesn't help either.
I've tried my best to troubleshoot this on my own, so I'm not shutting down your attempt to help. Just letting you know I have tried it.
I hadn't heard about a failing USB port problem... I'll read up on it.
Thanks for your help!
Atleast you dont have to worry about soft bricks if it auto boots into download mode
d34thp1ng said:
Atleast you dont have to worry about soft bricks if it auto boots into download mode
Click to expand...
Click to collapse
Actually I do...because USB still won't interface...
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
like i said could be a short or something in the usb port...or somewhere in the hardware. if you experience this problem across different software then it has to be a physical defect someplace. cause if it were software related it would fix once you flashed something different...
you can try for a warranty replacement, that requires a little loose morals. you will have to do something to cause it not to boot, or only boot to the at&t screen otherwise they will have proof of root and/or custom rom and void your warranty. once thats accomplished mention some crap about kies failing and they should replace it.
studacris said:
like i said could be a short or something in the usb port...or somewhere in the hardware. if you experience this problem across different software then it has to be a physical defect someplace. cause if it were software related it would fix once you flashed something different...
you can try for a warranty replacement, that requires a little loose morals. you will have to do something to cause it not to boot, or only boot to the at&t screen otherwise they will have proof of root and/or custom rom and void your warranty. once thats accomplished mention some crap about kies failing and they should replace it.
Click to expand...
Click to collapse
Hmmm... a few months back my original USB/Charging cable broke and for a couple of days I was forced to use a generic MicroUSB cable to charge my phone... Could that have cause a short/damage to the port?
My phone does not have warranty as I bought it refurbished. :'(
(Plus my morals aren't that loose.)
Had a similar issue, eventually determined that it was a short in this usb port and did a warranty return. (Only when plugged in could I turn on, etc.)
If that isn't an option for you, you could try flashing CM. For some reason, the cyanogenmod build won't let the phone charge when off. ( Automatically powers back up once the juice flows.)
I flashed a nightly and somehow, magically, my phone would power back up normally ( but wouldn't turn off, unless plugged in without power. So strange!)
Even more weird? I flashed back to stock and the new powering and rebooting stuck. The short wasn't fixed, my phone simply seemed to reverse the problem.
Plus, you would be using cm.
Sent from my SGH-I897 using XDA App
tbrass said:
Had a similar issue, eventually determined that it was a short in this usb port and did a warranty return. (Only when plugged in could I turn on, etc.)
If that isn't an option for you, you could try flashing CM. For some reason, the cyanogenmod build won't let the phone charge when off. ( Automatically powers back up once the juice flows.)
I flashed a nightly and somehow, magically, my phone would power back up normally ( but wouldn't turn off, unless plugged in without power. So strange!)
Even more weird? I flashed back to stock and the new powering and rebooting stuck. The short wasn't fixed, my phone simply seemed to reverse the problem.
Plus, you would be using cm.
Sent from my SGH-I897 using XDA App
Click to expand...
Click to collapse
Thanks! You guys have pretty much answered my questions...
I don't want to leave my nice DG Rom though.
Since I have determined that it is a hardware problem... I think I'm just going to live with it for a few more weeks until I can afford to go ahead and buy the newer build of the Cappy... (Might even wait until the SGSII comes out.)
You should be able to get warranty replacement, just make sure the device is in a stock condition when you take it in!
tbrass said:
You should be able to get warranty replacement, just make sure the device is in a stock condition when you take it in!
Click to expand...
Click to collapse
Even though I purchased the device as a refurbished device?
The only problem is that I can't Odin back to stock...
Cease1 said:
Even though I purchased the device as a refurbished device?
The only problem is that I can't Odin back to stock...
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=995143&highlight=safely+to+stock
this will get you to stock then look in forums for how to change boot animation change that to stock boot logo and your good to go i did read some were you could do boot img all on phone i belive. i cant find thats up to u
Okay so I called them and let them know what the phone was doing and they tried to send me to samsung to have them repair the phone...
I now hold in my hands a shiny new 1102 build Cappy... Took it to my local device service center and explained the random shutdowns and the booting into download mode and they replaced it no questions asked!
Now to get Cog 5b2 on here.
hi this is a bit strange for me. Me, my associate and a friend got a galaxy s i9000. My associate and me are always upgrading and downgrading with odin, trying last firmwares, kernel and more, no problem at all.
My friend got his stock kernel 2.2.1 on his phone. Two days ago he bring me the galaxy, totally dead. No combination, no download mode, no signs recharching, no signs attaching to the pc
He says "non ho fatto niente" (italian version of "i am scared of what you can think so i lie and gave the problem to you")
i searched the forums and tried some solutions (like vol+ and vol- while attached to the pc and insert the battery) but nothing happens. I have tried the battery of my phone, nothing. I have tried with the jig usb, nothing.
So, there is something else i can do? Some trick? I read in this forum that someone have solved with the jig, but how? I just put in, put in and tried to turn on the phone, nothing.
There is no sign of life at all. It's a paperweight?
Had the same thing, got in to download mode this way:
Hold menu+vol down+power and then (still holding the keys) insert Micro USB in to phone (Odin running). You need at least 13 fingers on one hand (finally visiting Chernobil payed off )
I tested it three times, only this worked (phone was totally dead, failed at flashing Sbl.bin).
Mine is still bricked (something wrong with my USB on comp or the cable) and at the moment I can not get into download mode this way (failed at param.lfs). Previously the phone was of battery for 24h+ and I'm waiting to see if this does something.
Good luck, you'll need it
nothing happens :S
tried odin 1.82...
there's a youtube video that shows a modified home made jig and it worked!give it a try
Are you still holding the keys after you connect USB cable? You should for some time.
How long has it been disconnected from power (removed battery)?
i put in the battery of my galaxy that was a 60%...it is better to use the original charged?
omarfaieq007 said:
there's a youtube video that shows a modified home made jig and it worked!give it a try
Click to expand...
Click to collapse
Link please!
(If you are not allowed to post links, just replace http with h**p or something)
I'll put on charging...it's getting hotter so something "it's alive"...we'll see
so...i made it working, don't know how precisely...it was full of crap, so i wiped out and upgraded to 2.3.4...but:
got arctifacts while changing screens (from desktop to app menù and turning on)
the phone shut down totally random...
I suspect some sort of hardware damage. You should put on original firmware and RMA it. If you don't put on original firmware they will claim it got damaged while flashing with an unofficial rom and you will have to pay for repairs and parts.
Could be faulty internal SD, can you run some sort of Android hardware testing software?
actually is "empty"...it doesn't have sim neither sd, is there charging...and now doesn't show the charging animation, shutdown again...bah
ok this is scary...the last 3 times the phone shutdown was because i put back the rear cover...wtf...
what about the testing tool? any name\know usefull software?
Seems we have similar problems. Sometimes when I had put my phone on desk (on the battery cover, not display) it shut down. Put a piece of paper under the battery but did nothing.
I meant internal phone memory, not removable sd card.
ahhh kk...and what about teh testing tool? you know some good app?
Today, i tried to flash my galaxy with 2.3.4 I9000XXJPY , something like that ... and i got stuck at partitioning .... So i removed battery. and now i cant turn on my< phone. I cant enter download mode, because 3 buttons are not working for me So what are my options ?? Jig? or anything else ???
try the other combination vol+ home power...i did this today and it works...otherwise try the jig, always worked for flashing brick
That doesn't work either May phone is strange. When i first tried to update it trough KIES, something blocked, sedond time was a success, after that i got MTP crashing aplication problem, that i couldn't solve i will get the Jig and try that. But if for some reason, JHig doesn't work... what are my next options ???
If phone is totally dead, jig won't work. If jig won't work, you need jtag. If jtag won't work you need to replace 'motherboard' on the phone.
If jig does not work, just RMA (odnesi na garanciju) the phone. If flashing kills it, something was probably wrong with the phone.
(hold vol+ home power and while holding them plug in USB- it worked for me, but failed again and it doesn't work anymore)
Ok, today i got jig, and i insert it into phone, and download mode pops up, but when i connect it to the computer, computer doesn't recognize phone, and odin too ??? what to do now ??
Have you tried reinstalling the Samsung drivers on to the pc?
Also make sure Kies isn't running, it's worth a try
I tried, no luck Any other solutions maybe ???
hi iv had a serious journey with my sgs i9000 here's how it goes:
i had it on 2.2 and then upgraded it officially to 2.3.3
not much else happened until i realised i wanted voodoo sound (apparently it was hyped to be awesome....its not that great) and neither is the ext4 file system 2.3.3 seems to be just as fast...dont know if it was a major problem on 2.2 but it aint really on 2.3.3
so i flashed voodoo on 2.3.3 from some website ... downloaded the app for the sound as the kernel didnt support that...
then i was using it and played around with the settings in clock work manager and i mounted and unmounted sd/card i dont think it made much difference but i thought i'd mention it ... the reason i did this is because when i tried to load a rom it wouldnt find all my sd card files beyond like the first 5 folders so i thought i'd give it a kick start....
then what happened is the phone just went off and i couldnt get it back on.... little did i know this was soft brick... i didnt know why....
i got the computer screen with the phone and exclamation mark.... i got into download mode a few times....
NOW .... i cant get it to turn on AT ALL using any combo buttons....
i think the nail in the coffin was flashing it with the "one-click odin" which was for the captivate but it said i could use it on the i9000 too.... which blatently screwed up the device....
anyway iv ordered a jig device... if this gets me into download mode ....what am i supposed to do...?
also is there anything i can do to get it into download mode now ? (bearing in mind iv done all the combo's ... some people say leave the battery out for a couple of minutes or half an hour....)
i think the bootloader is screwed up because it doesnt switch on....
even after i did a clean install of 2.3.3 with the pda phone and csc roms... it still just randomly switched off after 2/3 minutes of boot time....
what do i do now ?
samsung repair centre said they couldnt do anything and i'd have to send it back to samsung.... is it that bad?
Tried all the combos.... So you tried plugging in combo, then battery and also holding combo and then battery without cable in...
Have you read the pinned thread in general i think it is regarding, bricks?
Moving on
how did you do a clean install of 2.3.3 if you couldn't get DL mode??
Haven't read into the one click Odin so can't comment on that, but i think that was meant to be for softbricks...
anyway regarding the jig, just plug it in, and then wait a second or so, of not a minute (usually instant) and it should go into download mode. If it doesn't work again try some combos with the jig in...
If it is a hard brick i think you need to J-tag it, or yes take it to samsung in which case they may charge you for a repair, unless you say kies did it, and you didn't tell them everything you didi when you spoke to em.
Think thats everything lemme know if i missed out a question of yours or you want something better explained etc..
yeah i guess i was vague on the combo thing...
i've tried:
a) holding power, menu and volume down while sliding battery in (no usb cable in )
b) same as above with usb cable in
c)just menu and volume down buttons while i put battery in
d) both volume buttons and cable in
e)both volume buttons and battery in
.... the reason for d and e is because when i flashed it with the one click odin installer thing.. it restarted and showed a a t&t screen so i think its flashed the software with a samsung capacitive rom....so in theory i need to use those buttons ? not sure .... yet more questions....
i just hope this jig thing works ... btw do i have to pay sammy is my phone is under warranty?
how do i reflash the bootloader so it works properly? is that even the problem? do i need to do that? which pit file do i use ? some people say 512.... some say thats outdated and the new pit file is the thing to use .. ?
Talon26 said:
Tried all the combos.... So you tried plugging in combo, then battery and also holding combo and then battery without cable in...
Have you read the pinned thread in general i think it is regarding, bricks?
Moving on
how did you do a clean install of 2.3.3 if you couldn't get DL mode??
Haven't read into the one click Odin so can't comment on that, but i think that was meant to be for softbricks...
anyway regarding the jig, just plug it in, and then wait a second or so, of not a minute (usually instant) and it should go into download mode. If it doesn't work again try some combos with the jig in...
If it is a hard brick i think you need to J-tag it, or yes take it to samsung in which case they may charge you for a repair, unless you say kies did it, and you didn't tell them everything you didi when you spoke to em.
Think thats everything lemme know if i missed out a question of yours or you want something better explained etc..
Click to expand...
Click to collapse
ok now iv got it to turn on quite regularly .... but it keeps cycling (bootlooping) the at&t logo screen .... cant get into download mode or recovery mode.... just keeps boot looping.... oh and when i plug in the usb cable it just turns off.... its like i cant start it up with a usb in the phone...
update: been reading around and if anyone has this problem.... it looks like you might be hard bricked and apparently this cant be resolved via jig device..... dammit ...i'll still try and update the post... peace
So you haven't tried the jig yet?? because you haven't got it yet right
I don't think the device is bricked at all. Bricked usually means you have no response from it, so no matter what combo, actions you take you get no reaction.. However you are getting a boot although there is something going wrong as it does so...
So yes you need a new bootloader, i think every rom that you flash through odin has one, but i guess it may not, its best to search this, but i have read a few posts that say you need to click on update bootloader (i would check into this, as if this is wrong it will definitely brick your device)
My suggestion is go back to the onclick odin thing as that should do it, im sure someone has done something similar.
Yh so to sum up, i would have high hopes for a restoration (but what so i know ) and yes flashing a new bootloader with rom i reckon would do the trick. I think a stock rom will do it. Click on the stock rom link below and type in a few search terms in that thread to see if you pick up anything otherwise do a slightly wider one of the forum.
Talon26 said:
So you haven't tried the jig yet?? because you haven't got it yet right
I don't think the device is bricked at all. Bricked usually means you have no response from it, so no matter what combo, actions you take you get no reaction.. However you are getting a boot although there is something going wrong as it does so...
So yes you need a new bootloader, i think every rom that you flash through odin has one, but i guess it may not, its best to search this, but i have read a few posts that say you need to click on update bootloader (i would check into this, as if this is wrong it will definitely brick your device)
My suggestion is go back to the onclick odin thing as that should do it, im sure someone has done something similar.
Yh so to sum up, i would have high hopes for a restoration (but what so i know ) and yes flashing a new bootloader with rom i reckon would do the trick. I think a stock rom will do it. Click on the stock rom link below and type in a few search terms in that thread to see if you pick up anything otherwise do a slightly wider one of the forum.
Click to expand...
Click to collapse
jig arrived today! .... i plugged it in ..... NOTHING ..... (read on theres more to the story!!!)
so i put it in nothing happened...... i thought maybe the jig device was not working so i tried it in the i9100 (s2) .... WORKED ...!
im really stubborn so i needed to make mine work too..... i read in a review of the jig device that someone bought one and it hadnt worked .... i hadnt ruled that out
anyway all day i just kept trying to jump start it by putting in the wall charger in and out ... i usually get some reponse from that....nothing apart from a second of something like a loading circle......
anyway then i left it on charge for an hour ....maybe the battery was dead and then tried again ....
(btw i was getting no response at all at this stage, not even the at&t thing ...)
so it was pure black screening me.....
then i got home from work and thought let me exchange the battery and see what happens....
i changed the battery and put the jig device in ...... VOILA !!! download mode....
all is well so far i've flashed with 2.3.3 pda,phone and csc files and checked repartition... i haven't messed with the bootloader option
seems to be working ok....also gave it a restart too ... last time it got to this point but it didnt turn back on after a restart ....
in conclusion .... charge battery fully externally (putting the power in the phone in this state was not charging it)
then with a full battery put jig in .... if that doesnt work you phone might be seriously bricked.... bravo to whoever dreamt up the jig device
Glad to hear the great news!
Nice
Thanks for this useful info
I've had a hunt around the forum and the net in general to look for solutions, but haven't come across the same issue.
The tab was running Overcome 4.10 just fine, but I decided I'd wipe everything in CWM and go for some ICS action instead. I used every wipe option.
In retrospect, I should have RTFM, but I used every wipe option in CWM.
After I did this I rebooted the tab and it went back to CWM. I decided I didn't want to do anything there and then, so I turned the tab off and came back to it later.
Hit the power button - no joy. Plugged in my charger cable and after a few seconds it came to life showing the battery charging screen, but it did not change from the first few seconds where there is a spinning/loading icon over the battery. I've left it plugged in for well over 4 hours in total now and still no joy - the battery screen comes on and goes off of it's own accord.
Now, I'm hoping I just have a dodgy charger cable and I'm going to resolder it just now while I wait for responses.
Any suggestions if that doesn't sort it out?
EDIT -
I've resoldered the cable and it's made no difference.
Also, a bit obvious, but I didn't mention that it will not go into download or recovery mode. The turning it on whilst touching the screen trick doesn't do anything either.
EDIT 2 -
I opened the tab up, disconnected the battery for a few minutes and reconnected. No difference.
adb, Kies and one-click unbrick don't see the tab. Win7 has seen the 2 sd card directories, but couldn't mount/access them. This isn't consistent, though.
Any ideas? I don't know what else I can do
Soft Bricked?My ***
I am very sorry to tell u that this thing looks like Hard Bricked
Anyway try these links
http://forum.xda-developers.com/showthread.php?t=1133590
http://forum.xda-developers.com/showthread.php?t=1127978
Thanks for your reply and the links. Unfortunately, I've tried everything in the first thread with no luck.
I think I'll practice my soldering and try AdamOutler's UnbrickableMod.
I'm curious what exactly bricked it :-/ Wiping the battery stats with no ROM in place?
Oh well
nelsonoski1972 said:
I am very sorry to tell u that this thing looks like Hard Bricked
Anyway try these links
http://forum.xda-developers.com/showthread.php?t=1133590
http://forum.xda-developers.com/showthread.php?t=1127978
Click to expand...
Click to collapse
Hmmm... this looks more like you messed up CWM. Normally, if one chooses to shut down his phone while in CWM, after reboot it gets back into CWM on auto. Try getting into CWM or download-mode by holding the buttons untill you see something happening on the screen.
If that fails, I guess you have a new goodlooking paperweight...
Any idea how CWM might have been messed up? No battery stats maybe confusing things? I find it strange that it did reboot into CWM after I wiped that stuff and then after being powered off it did not turn back on.
A mystery, but you're right - it is a very pretty paperweight
dirlan2001 said:
Hmmm... this looks more like you messed up CWM. Normally, if one chooses to shut down his phone while in CWM, after reboot it gets back into CWM on auto. Try getting into CWM or download-mode by holding the buttons untill you see something happening on the screen.
If that fails, I guess you have a new goodlooking paperweight...
Click to expand...
Click to collapse