[Q] SKT SHV-E160 Admin Code Problem... - Galaxy Note GT-N7000 Q&A, Help & Troubleshooting

Ok I'm wondering if someone could help me out here. I picked up a Korean SKT Galaxy Note today, however the LTE isn't compatible with docomo's network. I did some searching online and found that there is a code you can put into the dialer to access a STK hidden menu, which ultimately let's you alter the phone to accept WCDMA frequencies and such. The code is:
319712358
However the phone then requires a password. I found 774632 as the password but when I put in the sequence, nothing happens.
I bought this phone used for 65,000 yen (about $720) and it is apparently unlocked, as I can use my docomo number without a problem. I desperately want to keep the phone (the store said I could return it) but have no use for it without the data, and thus would be incredibly grateful if someone could help me out...

May be try to use 996412 instead of 774632

TokyoGuy said:
Ok I'm wondering if someone could help me out here. I picked up a Korean SKT Galaxy Note today, however the LTE isn't compatible with docomo's network. I did some searching online and found that there is a code you can put into the dialer to access a STK hidden menu, which ultimately let's you alter the phone to accept WCDMA frequencies and such. The code is:
319712358
However the phone then requires a password. I found 774632 as the password but when I put in the sequence, nothing happens.
I bought this phone used for 65,000 yen (about $720) and it is apparently unlocked, as I can use my docomo number without a problem. I desperately want to keep the phone (the store said I could return it) but have no use for it without the data, and thus would be incredibly grateful if someone could help me out...
Click to expand...
Click to collapse
hi
if urs is shv-e160s , the code is 996412 hope it help

thank you very much lancechg, 996412 works on my e160s. my major problem is how to remove the restriction on camera and usb connection wich prevents me from rooting my gnote. can you give sn advice on to remove it. thanks in advance...

Related

...really need help, 24 hours to go!

Hello everybody, I'm writing you from UK, where I bought a second-hand G1 (absolutely perfect!!! really good). The phone is T-Mobile branded and factory-default cleaned. Once I got it, placed my italian H3G sim inside, and (of course...) it told me that it was locked. I purchased a key (...I know may I could do without it... but very few time to spend, these days) and it was succesfully sim-free. Then I reebot it, and start the acrivation... that doesn' run!!! I insered the correct APN parameters, I also tried with a UK O2 and Vodafone sim, but, problem is that the gsm segnal level (small icon on the top with 4 vertical bars) is not giving signs of life, and it has a small "cross" on the left side. Of course I can't get the registration... I can't get the line!!!! why does it happen??? all the sims are correctly recognized (ask for the pin and the "no sim" messages and icons are off), but no way to go over...
Please, help me in any way, just 1 more day here, then I'll go back to Italy... far from the shop!!!! HEEEEEEEEEEEEELP!!!!!!!!!
If you type:
reboot
and press enter. If the phone reboots you can have a chance, if the phone does not it means its on a updated version which you will have to downgrade. While downgrading i recommend going up to Rooted versions of android. Although you might not need it.
You should look here:
http://forum.xda-developers.com/showthread.php?t=442480
and/or here:
http://forum.xda-developers.com/showthread.php?t=452316
You can get through your problem, if its just the registration. by simply following a few of the instructions in the first link combined with some of the instructions in the second link.
@elmejor: He didn't even mention rooting. His problem is he can't get his phone to associate with the networks on his sim.
@tony_m78: You should probably post what apn settings you are using. Also, this is NOT A DEVELOPMENT ISSUE and should not have been posted in this forum.
thanks gor your answer.... I have been to those links THOUSANDS of times, within yesterday night and today... but I really can't get a solution. I can't go over the "error connecting to server" page :-(
The worst problem is that I really don't have time NOW, but I'll have it at the end of the week; I know I'd get a solution, working on that... but really I can't. But whay do you think about the absence of segnal? is it normal?!?
Tomorrow morning I'll find the way to buy a T-Mobile original sim and try to see what happen. . . . . . but that's strange!!!!!!!! not normal... i insered a correct code (generated from the IMEI), the answer was "unlocked", free for others carriers.... BUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU!!!!!!!!!! :-( tic tac tic tac. . . ..I don't have time!!!!!!!! :-( nobody experience this strange problem?!?
jashsu said:
@elmejor: He didn't even mention rooting. His problem is he can't get his phone to associate with the networks on his sim.
@tony_m78: You should probably post what apn settings you are using. Also, this is NOT A DEVELOPMENT ISSUE and should not have been posted in this forum.
Click to expand...
Click to collapse
...oooooops... really sorry, I was wrong. Can you link me to the correct place??? I'll move there immediatly...
jashsu said:
@tony_m78: You should probably post what apn settings you are using.
Click to expand...
Click to collapse
...I don't think the problem is the APN, I set the correct one (from Wiki) for H3G Ita and for O2 UK (these are the sim I tried with); the problem is that the segnal is ZERO, like the sim is not present... BUT IT IS, it ask me for the pin and accept it....
Can you manually select the network to connect to? Settings>Wireless controls>Mobile networks>Operator selection
Are you sure radio is working on this phone? Maybe it has some physical problems (like bad gsm chip)... Or - maybe you have sim cards not acceptable in UK.
Try with T-mobile sim first. If not working:
I would try to factory reset device some times, if it don't help I would try to reflashing it (firmware and radio). But in your case I think you should ask about this situation in shop where you bought it (if you have warraty) first.
Data plan?
I had a similar problem when I got my APD1 phone in the US. When I returned to the UK, I put in my Tesco SIM and the phone signal strength icon had an 'x' indicating not connected or no signal. Eventually I used my home wifi to activate the phone. After the phone was activated, the same SIM was able to connect and the signal strength icon worked normally.
BUT, it turned out that all I probably needed to do was to have a SIM with a data plan (which mine didn't at the time) <<BLUSH>>
Have you confirmed that your SIM has data turned on?
Of course ensuring that the APN settings are correct is also necessary. (But it sounds like you did that)

I am in a major fix...Can anyone please help me

Hi Guys,
I just snagged a T-Mobile G1 off eBay in India and turning it on I found that pattern unlock thingy.Not knowing what the pattern was I did the wrong pattern 5 times and then got stuck on the username/pwd screen.I couldnot go anywhere after that.I consulted some guys on the net and they asked me to give it the alt+w treatment.An voila, now my phone is asking to be reactivated via google. I neither have a T-Mobile SIM, nor am I in T-Mobile coverage. How do i unlock my phone? Is there any way I can flash some unlocked ROM into it so I could get some actual service out of my device other than being a friggin' paper weight. Did I completely fry it?Is there any hope? Please help me....
Thanks
Its not fried... but you will need to flash a modified firmware. But in order to do this you need root access. So, you will need to borrow someone else's T-Mobile sim card. Change your APN at the login page to use the Edge network (there are guides on here on doing that) and then login. Gain root access with again, another guide we have written on that. Finally, flash a modified G1 firmware, preferably JF or Haykuro builds which allow you to skip all that. However.. what service do you even plan on using with your G1? Understand that likely only ATT/ Cingular will work minus the 3G coverage which abolishes pretty much half the functions on the G1, but either way thats what you need to do first.
You dont need tmobile to unlock it from that screen, you can enter apn settings for your area and connect to any local network.
I'm in norway and I could activate mine just fine, I just had to put in my carrier's settings in the apn screen. Also worth noting that you can only get to the data roaming screen if you restart the phone (it'll say "you have lost network connectivity <something>" and allow you to open that screen).
downgrade to rc 29 using dream img from how to downgrade. then look at how to activate without sim topic. activate and voila ur good to go

I got my G1 now what?

Hello peeps, i finally received my G1 today... Happy!
Two things i would like to know i do have a t-mobile sim here but i dont get t-mobile service in Australia so i will need to unlock it.
What would be the best way of going about this... could you point me in the best direction for the cheapest and safest Australian Unlock codes , other thing is somewhere i read its possible to skip the gmail bit and activate it later also someone said to me it was possible to start the wireless connection to enter those gmail details so i dont need a sim with data....
So main question is with a t-mobile sim here is it possible to access the phone without having it unlocked and without t-mobile service?
The other thing is i have heard going around is that dev images have unlock strings would this allow me to use a Australian sim to enter the details at the start without having to pay for unlock??
Call t-mobile to get the phone unlocked, they are quite relaxed with the unlock codes, secongany dev based rom something like cyan' s rom will allow you to skip the g-mail reg when you boot up and connect via wi-fi, even hero roms have that option
I tried messaging t-mobile but they said i needed proof of perches because i don't have a t-mobile account
Dominating said:
Hello peeps, i finally received my G1 today... Happy!
Two things i would like to know i do have a t-mobile sim here but i dont get t-mobile service in Australia so i will need to unlock it.
What would be the best way of going about this... could you point me in the best direction for the cheapest and safest Australian Unlock codes , other thing is somewhere i read its possible to skip the gmail bit and activate it later also someone said to me it was possible to start the wireless connection to enter those gmail details so i dont need a sim with data....
So main question is with a t-mobile sim here is it possible to access the phone without having it unlocked and without t-mobile service?
The other thing is i have heard going around is that dev images have unlock strings would this allow me to use a Australian sim to enter the details at the start without having to pay for unlock??
Click to expand...
Click to collapse
How to register the G1 without a sim or data plan...
http://forum.xda-developers.com/showthread.php?t=452316
As far as unlocking goes...? This is how to do it after you get the code.
http://www.blogsdna.com/2357/how-to-unlock-t-mobile-g1-phone.htm
or
Try Unlock-tmobileg1.com which charges $23.99 USD.
Search unlock g1 in the forum search bar to pull up some old threads about unlocking your phone, pretty sure that you would find a similar problem to your's there than I could give you I have t-mobile in the us, I am sure I have seen posts like your's solved in some old threads

[Q] I-9000T unlocking problems

Hi,
I have tried to unlock my new Galaxy S to a different provider. I have obtained the unlocking codes, however when I change chip of the new provider, switch on he phone and try to install the new codes. I do not get to that screen that you input the new codes. I get something like provider blocked or something.
There is other way to insert the unblocking codes ?????
thanks for your help
Antonio
antonioborgonovo said:
Hi,
I have tried to unlock my new Galaxy S to a different provider. I have obtained the unlocking codes, however when I change chip of the new provider, switch on he phone and try to install the new codes. I do not get to that screen that you input the new codes. I get something like provider blocked or something.
There is other way to insert the unblocking codes ?????
thanks for your help
Antonio
Click to expand...
Click to collapse
Wrong forum. And arent there apps in MARKET to do it for you?
have you tried this one http://forum.xda-developers.com/showpost.php?p=8942669&postcount=94

Samsung ATIV SE - No internt sharing

Hi All,
I got the ATIV SE and really like it. Problem is that even though it's unlocked SIM and I have also developer unlocked it, I cannot get internet sharing to turn on. I bought from Verizon, but am using it on T-Mobile. Error is:
To enable tethering on this device, go to Verizon.com or dial *611
What is the best way to get this phone to forget about Verizon? Is there a way to just factory reset to vanilla windows?
Thanks for help
fruehling said:
Hi All,
I got the ATIV SE and really like it. Problem is that even though it's unlocked SIM and I have also developer unlocked it, I cannot get internet sharing to turn on. I bought from Verizon, but am using it on T-Mobile. Error is:
To enable tethering on this device, go to Verizon.com or dial *611
What is the best way to get this phone to forget about Verizon? Is there a way to just factory reset to vanilla windows?
Thanks for help
Click to expand...
Click to collapse
I'm not sure but could it be possible that your carrier lock Tethering?
Have you tried an oter csc?
Or can you flash an other ROM`?
Thanks for the reply. No, carrier does not lock. The problem is with the phone being set up to think it's a Verizon phone. Is there a way to flash another rom here? or something like root?
We can interop-unlock Samsung WP8 phones, although if it's fully up-to-date it may need to be downgraded first. I don't know if that will help you, though. I can't tether (well, not over WiFi; wired works) my non-T-Mobile phone on TMo either.
There won't be another CSC to flash... Unless you can get @-W_O_L_F- to help you out with a custom rom....
GoodDayToDie said:
We can interop-unlock Samsung WP8 phones, although if it's fully up-to-date it may need to be downgraded first. I don't know if that will help you, though. I can't tether (well, not over WiFi; wired works) my non-T-Mobile phone on TMo either.
Click to expand...
Click to collapse
Sorry for the slow reply. I didn't get notified by this site that there was a reply to my post.
Can you please help me out with how to do this with ATIV SE?
Interop-unlock instructions are in my signature. I don't know if they'll help you though, and if you're on GDR3 (probable) then you'll need to downgrade first (or use a custom ROM) and for that you need to read @-W_O_L_F-'s threads. I don't know if there's a base ROM (non-Verizon) for the SE; if there is you can probably flash that but we may not have one.
If you wanted to know how to do wired tethering, just search for "tether ATIV S". Seriously, #1 rule of this forum is literally "search before posting"
GoodDayToDie said:
Interop-unlock instructions are in my signature. I don't know if they'll help you though, and if you're on GDR3 (probable) then you'll need to downgrade first (or use a custom ROM) and for that you need to read @-W_O_L_F-'s threads. I don't know if there's a base ROM (non-Verizon) for the SE; if there is you can probably flash that but we may not have one.
If you wanted to know how to do wired tethering, just search for "tether ATIV S". Seriously, #1 rule of this forum is literally "search before posting"
Click to expand...
Click to collapse
Seriously, thank you for the reply. I did lots of searching, but since ATIV S and SE are quite different, I wasn't sure if anything related to S would work.
I'd love to flash an SE base ROM on this, but I haven't been able to find that there is one.
The MS Store in Bellevue said that they would be getting a Samsung base ROM in a couple months that they would flash onto my device for me. But I'd like to do this sooner.
Should I reach out and read wolf's threads to see about using a custom ROM here then?
Thanks!
fruehling said:
Hi All,
I got the ATIV SE and really like it. Problem is that even though it's unlocked SIM and I have also developer unlocked it, I cannot get internet sharing to turn on. I bought from Verizon, but am using it on T-Mobile. Error is:
To enable tethering on this device, go to Verizon.com or dial *611
What is the best way to get this phone to forget about Verizon? Is there a way to just factory reset to vanilla windows?
Thanks for help
Click to expand...
Click to collapse
Try a variation on the following method:
http://forum.xda-developers.com/showpost.php?p=52490701&postcount=5
Worked for the HTC 8x, should work for Samsung as long as you can put in the right model ID. (hint: it's not "dm=Windows%20Phone%208X%20by%20HTC" for your Samsung.) Good luck!
compu829 said:
Try a variation on the following method:
http://forum.xda-developers.com/showpost.php?p=52490701&postcount=5
Worked for the HTC 8x, should work for Samsung as long as you can put in the right model ID. (hint: it's not "dm=Windows%20Phone%208X%20by%20HTC" for your Samsung.) Good luck!
Click to expand...
Click to collapse
Thanks for that! The process worked and got me almost there.
Ok! Super progress here. This is what you need to add for the Samsung ATIV SE
// Replace oemId=Samsung with oemId=NOKIA
oSession.PathAndQuery = oSession.PathAndQuery.Replace ("oemId=SAMSUNG", "oemId=NOKIA");
// Replace the device model with the dm for the Nokia 925 (AT&T / North America):
oSession.PathAndQuery = oSession.PathAndQuery.Replace ("dm=ATIV%20SE", "dm=RM-893_nam_att_206");
Note the CAPS for the oemId.
I installed Access Point (along with some other cool Nokia Apps). I went to enable Internet Sharing, but now I have a new message:
Add Internet sharing?
"Your current data plan doesn't include Internet Sharing (it does). Do you want to open an app from your mobile operator to add it? Internet sharing use your cellular data and may incur additional charges."
Any ideas where to go from here? Clicking Yes does nothing. So does clicking no.
fruehling said:
Thanks for that! The process worked and got me almost there.
Ok! Super progress here. This is what you need to add for the Samsung ATIV SE
// Replace oemId=Samsung with oemId=NOKIA
oSession.PathAndQuery = oSession.PathAndQuery.Replace ("oemId=SAMSUNG", "oemId=NOKIA");
// Replace the device model with the dm for the Nokia 925 (AT&T / North America):
oSession.PathAndQuery = oSession.PathAndQuery.Replace ("dm=ATIV%20SE", "dm=RM-893_nam_att_206");
Note the CAPS for the oemId.
I installed Access Point (along with some other cool Nokia Apps). I went to enable Internet Sharing, but now I have a new message:
Add Internet sharing?
"Your current data plan doesn't include Internet Sharing (it does). Do you want to open an app from your mobile operator to add it? Internet sharing use your cellular data and may incur additional charges."
Any ideas where to go from here? Clicking Yes does nothing. So does clicking no.
Click to expand...
Click to collapse
At this point, I'd call T-Mobile and see if they can double-check everything on their end. They might need to reprovision your data services. I had a similar issue with my old iPhone when I added the 500MB tethering option.
They do have an "access point" app (I forget what it is called) that comes pre-installed on their phones. (Literally useless, it is so when you click Yes on the "learn more" button" it tells you to call customer care to enable internet sharing. I always delete it off of mine when I restore from stock).
That is another fun trick: to get rid of apps you can't uninstall, set the date and time on your phone to later than 2200 and click on the app...it will tell you that it expired and give you the option to uninstall it!
Let me know how you make out!
fruehling,
Did you ever get this solved? I'm planning on getting this phone too, but for use on At&t. I hope I don't run into the same problem. But I do have some questions to ask you, I hope you don't mind answering....1) Does the voice call works as any unlocked phone? .... 2) Can T-Mobile detect that you're using an ATIV SE? Or does T-Mobile says you have an Unknown device when you check your online account? Thanks!
fruehling said:
Thanks for that! The process worked and got me almost there.
Ok! Super progress here. This is what you need to add for the Samsung ATIV SE
// Replace oemId=Samsung with oemId=NOKIA
oSession.PathAndQuery = oSession.PathAndQuery.Replace ("oemId=SAMSUNG", "oemId=NOKIA");
// Replace the device model with the dm for the Nokia 925 (AT&T / North America):
oSession.PathAndQuery = oSession.PathAndQuery.Replace ("dm=ATIV%20SE", "dm=RM-893_nam_att_206");
Note the CAPS for the oemId.
I installed Access Point (along with some other cool Nokia Apps). I went to enable Internet Sharing, but now I have a new message:
Add Internet sharing?
"Your current data plan doesn't include Internet Sharing (it does). Do you want to open an app from your mobile operator to add it? Internet sharing use your cellular data and may incur additional charges."
Any ideas where to go from here? Clicking Yes does nothing. So does clicking no.
Click to expand...
Click to collapse
If you are in Dev Preview.. try the foreign sim trick
if not just install a new keyboard.
I followed the procedure outlined, and using SysAppPusher, it attemped to install "access point" under Microsoft mobile (not Lumia), and from the store, the status changed to "owned". But it didn't actually install it.
I turned off the proxy (as it was recommended) and it still didn't install it. Any idea as to what could be wrong?
I'm on the latest 8.1 release.

Categories

Resources