Database Develop

problem with odim

i have tried to flash a stock rom(2.3.6) in my SGM.
ODIN:
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V0, P0,R0
<1> START!!!
<1> set download environment.
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> mibib download..
<1> 1/9 Finished.
<1> qcsbl download..
Phone:
samsung_bml_format FAIL : 90220000
OWN UPDATE FAIL
and that's it.
its stuck.
i have manged to make him turn on by flashing CWM.
But somehow i fu**** it up again.
When i turn the phone on,its stuck on boot loop.
please help.
i dont think that my dad will pay on anothe repair.

Did you use a correct rom ?
And, if the one you used isn't one package,
Did you put it in right order ?
I'm just a noob,
So, CMIIW

I did everything like the guide said.

efid845 said:
i have tried to flash a stock rom(2.3.6) in my SGM.
ODIN:
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V0, P0,R0
<1> START!!!
<1> set download environment.
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> mibib download..
<1> 1/9 Finished.
<1> qcsbl download..
Phone:
samsung_bml_format FAIL : 90220000
OWN UPDATE FAIL
and that's it.
its stuck.
i have manged to make him turn on by flashing CWM.
But somehow i fu**** it up again.
When i turn the phone on,its stuck on boot loop.
please help.
i dont think that my dad will pay on anothe repair.
Click to expand...
Click to collapse
search for any Odin one click package for gingerbread and just flash it you just need to connect your device on download and click on start in Odin one click you will get your device running
---------- Post added at 02:25 PM ---------- Previous post was at 02:12 PM ----------
sorry for the post above I was thinking that I was reading captivate forum here try this guide:- http://androidadvices.com/samsung-galaxy-mini-s5570-steps-install-gingerbread-236-jvkt1-firmware/

[Q] my galaxy mini is break cant flash any rom

Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V0, P0,R0
<1> START!!!
<1> set download environment.
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> mibib download..
home+power not open recovery mod
i dont flash rom phone is not open

Download mode opening or not?

yes download mode is opening work

Then try to flash stock from again
follow step by step tutorial here,
yagyagaire.blogspot.com/2011/12/how-to-upgrade-samsung-galaxy-pop-to.html

I tried different roms and I tried to install recovery mode but the same result not flashing
Thanks for your help I will try it now

my ops file is corrupt, so nothing is happening was changed and now tank u so much :victory: :laugh:

K dude Congrats...
Next time press thanks button instead of writing it ;-)
Sent from my GT-S5570 using xda premium

Stuck on Odin Flashing.

I am trying to flash my Ace through Odin v4.42, got the S5830_Cooper_v1.0.ops file selected, One Package, Protect Ops, Auto Reboot and Reset time. Selecting the S5830XWKTM_S5830OXXKT3_S5830XWKT7_HOME.tar.md5 in One Package Option but Odin outputs:
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V0, P0,R0
<1> START!!!
<1> set download environment.
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> mibib download..
I'm staring at the screen waiting for it to finish but it's already 15min. Should I disconnect the cable?
Edit: Sorry. Solved. Solved it by renaming the S5830_cooper_v1.0.ops to COOPER_v1.0.ops

Galaxy S Plus soft bricked

Hello.I want to install CWM but after this Odin get stuck (>7 minutes) and i disconnect from the PC. After this, when i open this phone, show me a photo that means soft brick(i check some threads on this forum). I try to install aries with recovery and aries with stock ROM and Odin stay a lot of minutes and don't make anything.
When i install aries with stock rom(download from sam for romania carriers) show me this:
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V0, P0,R0
<1> START!!!
<1> set download environment.
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> amss.mbn download..
Can I solve this problem?

rxgamer said:
<1> big partition size!! <1> amss.mbn download..Can I solve this problem?
Click to expand...
Click to collapse
Look in My Android Solutions (link below ) concerning i9001 amss.mbn download problem for solution
Check this out! Links to useful Guides and " Banned " Documentaries ​

Solve. Thank you.

[Q] help,back to original rom please :( galaxy exhibit 4g

hello i have a samsung galaxy exhibit 4g from t-mobile, my phone turns on but it only start in samsung galaxy exhibit 4g exclusive from t-mobile logo, and thats all, it restarts, i dont have root and neither recovery mode, so can you help please? can i install the original rom with odin? helpe me please, thanks for your time

Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V0, P0,R0
<1> START!!!
<1> e - unknown file - "preload.img.ext4"
<1> set download environment.
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> amss.mbn download..
<1> 1/4 Finished.
<1> adsp.mbn download..
<1> 2/4 Finished.
<1> boot.img download..
<1> 3/4 Finished.
<1> cache.img.ext4 download..
<1> 4/4 Finished.
<1> reset pda..
<0> Started Timer
<1> Close serial port and wait until rebooting.
<1> PASS!!!
<0> Destroy instant..
<0> Killed timer
i try with odin multidownloader and doesnt work

kira99 said:
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V0, P0,R0
<1> START!!!
<1> e - unknown file - "preload.img.ext4"
<1> set download environment.
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> amss.mbn download..
<1> 1/4 Finished.
<1> adsp.mbn download..
<1> 2/4 Finished.
<1> boot.img download..
<1> 3/4 Finished.
<1> cache.img.ext4 download..
<1> 4/4 Finished.
<1> reset pda..
<0> Started Timer
<1> Close serial port and wait until rebooting.
<1> PASS!!!
<0> Destroy instant..
<0> Killed timer
i try with odin multidownloader and doesnt work
Click to expand...
Click to collapse
try using odin from here 3rd post. should work as it has for me everytime