so my lg thrill is rooted i tryed to update my lg but couldnt why idk and will this mess up my phone if its rooted and can sum one just give me steps i did all that said to do on the update tool
cristiano_7 said:
so my lg thrill is rooted i tryed to update my lg but couldnt why idk and will this mess up my phone if its rooted and can sum one just give me steps i did all that said to do on the update tool
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=22417769
Start at step 3 lg flash tool and FOLLOW IT STEP BY STEP or its not going to work youll need to flash v20p if you want stock at&t and youll lose root no mattet what kdz you flash
Sent from my LG Thrill running acidHAZARD 3.5 w/ sense battery mod
JReeher said:
http://forum.xda-developers.com/showthread.php?p=22417769
Start at step 3 lg flash tool and FOLLOW IT STEP BY STEP or its not going to work if you want stock at&t youll need to flash V20p and youll lose root no matter which kdz you flash
Sent from my LG Thrill running acidHAZARD 3.5 w/ sense battery mod
Click to expand...
Click to collapse
Edit... my bad didnt mean to do this
Sent from my LG Thrill running acidHAZARD 3.5 w/ sense battery mod
Related
We have found a gb kdz from brazil that works on the LG Thrill. I need some testers to confirm this method works as it works for me. In the end you will end up with a baseband on your phone that works with AT&T fully. You will be able to use the custom european gb roms on your phone. It requires a few more steps to accomplish root.
Requirements:
Being able to flash a kdz like the method described here:
http://forum.xda-developers.com/showthread.php?t=1287236
v20a: The brazil kdz
http://csmg.lgmobile.com/swdata/WEBSW/LGP920H/ABRAML/V20a_00/V20A_00.kdz
v21a: The original euro kdz DO NOT TRY v21b
http://gibtet.net/LGO3D/Roms/V21A_00.kdz
Step one make sure you are on the froyo baseband if not go here:
http://forum.xda-developers.com/showthread.php?t=1343915
I repeat make sure you start on the froyo baseband
Step two flash the v20a kdz following this guide:
http://forum.xda-developers.com/showthread.php?t=1287236
make sure after the flash is successful to reboot into recovery and wipe data aka pull battery reinsert it and hold vol down and hit power
Step three flash the v21a kdz following this guide:
http://forum.xda-developers.com/showthread.php?t=1287236
Step four Root the thrill with v21a installed(only reason for going from v20a to v21a is to root as v20a is not rootable)
After this you can flash any euro gb custom rom or install the cyanogenmod made for the optimus 3d(Do not use the p925 thrill cm because that is made for the froyo baseband)
Please let me know if this works for you.
its not working for me U_U so i need to extract the baseband
camaleonx said:
its not working for me U_U so i need to extract the baseband
Click to expand...
Click to collapse
There is no known method of extracting the baseband from the kdz. As for it not working are you an lg thrill user? Did you follow all the steps completely?
yes im a LG Thrill user and yes i do it but i do again en some hours but the last time i just get 2G, i hope someone can give us just the baseband.
camaleonx said:
yes im a LG Thrill user and yes i do it but i do again en some hours but the last time i just get 2G, i hope someone can give us just the baseband.
Click to expand...
Click to collapse
does the v20a kdz itself give you 3g/4g?
yes with V20a i have 3G/4G and then witg v21a i just have 2G.
so you went from v20a to v21a correct?
yes that correct, when you say in other topic that you keep the baseband, i do the same but without your lucky
Finnaly got it all to load using thw download methed. Ran a speed test on 20 before going to 21. Hit around 1.5 and 21 hit about 2.0. Ao I don't see much differance. And that' about what I was getting here with froyo.
Sent from my LG-P920 using XDA App
so you have Gingerbread + root + 4G???
In my case with any euro baseband I could never achieve 3g or higher at all. When I went to the brazil rom I could finally get 3g and higher. But for some reason when I went from v20a to v21a I could still get high speed connections.
well i'll try agani in a few hours i hope it works U_U
In my case with any euro baseband I could never achieve 3g or higher at all. When I went to the brazil rom I could finally get 3g and higher. But for some reason when I went from v20a to v21a I could still get high speed connections.
Click to expand...
Click to collapse
what is the maximum speed you got
I just ran a test again and hit 2.94 down and 1.04 up. I don't know if that's 4g or not. But it's better than abe with froyo .
Sent from my LG-P920 using XDA App
now reading slowly i start from Triller rom, not from stock, someonea has start from a custom froyo rom or from that stock rom?
I don't see how it matters
I would think it shouldn't matter if you have a custom rom on your phone or not. both the v20 and v21 don't normally run on the thrill. so the stock rom would kind of be like a custom to begin with.
Cannot get past six percent on update process of the lg mobile tool with v20a. Gets to that point then stops what am i doing wrong
6%
I had the same problem. What I did was in the video at the bottom of the the first link. Leave the phone hooked up to the usb, pull the battery, while holding the vol up and power button, put the battery back in and let it vibrate indicating it's in d/l mode. and restart the update.
it worked but cant see the arrows only see the h and dont have connection
Are u using thrill or p920h?
Sent from my LG-P920 using xda premium
my friends lg thrill p925 will not update over the lg update program to the 2.3.5 i have root already on andriod 2.2.2 he wants to go to 2.3.5 & its not letting me
babyboy3703 said:
my friends lg thrill p925 will not update over the lg update program to the 2.3.5 i have root already on andriod 2.2.2 he wants to go to 2.3.5 & its not letting me
Click to expand...
Click to collapse
Its the same process man.. dl flash tool ... and the gb baseband you want to flash v20p or v20c .. and use LG flash tool
Or take the battery out unplug the phone ... hold volume+ plug the phone back in continue holding volume + ... open LG update let the drivers install .. and at the top click customer service and go to recovery phone and enter your imei number put your battery back in and run update
Sent from my 2.9 version BiOHaZaRd cooked LG Thrill
Ok I am going to post this because it worked for me several times. If it works for you, great, if not, sorry......I am assuming zero responsibility for bricking your phone ….. So I was thinking there should be a simple way to go back to stock 2.3.5 using just the "LGMobile Support Tool" The problem is that it won’t let you run the update tool if it sees that the operating system version is correct (i.e. running any rom that is 20p based) so what I did was download an O3D rom and placed it on the phone (ThiaiZO3DV2.7.1GB to be exact) I used CWM to install the rom. What this accomplished was to change the OS version but not the baseband. When the rom was loaded and working I turned on debugging and then used the "LGMobile Support Tool">>>(the tool can be downloaded from the LG web site) it will now update the phone to stock 2.3.5 without giving you the message that says your phone is up to date. If you get stuck in a boot loop (as I did ) just pull the battery put it back in and boot into stock recovery using volume down , 3d button and power and just do all the wipes then reboot….I hope this helps someone
Ok,
just to be clear you were coming from the Optimus 3D baseband and rom and successfully flashed to the US Thrill baseband and rom using this method?
I just saw that gingerbread is finally out for the Thrill and thought i'd flash back if there was an easy way. (I have been running the Optimus 3d baseband and defualt rom for quite a while now)
IzeBerg said:
Ok,
just to be clear you were coming from the Optimus 3D baseband and rom and successfully flashed to the US Thrill baseband and rom using this method?
I just saw that gingerbread is finally out for the Thrill and thought i'd flash back if there was an easy way. (I have been running the Optimus 3d baseband and defualt rom for quite a while now)
Click to expand...
Click to collapse
Then there isn't much reason to switch to v20p if you are already on gingerbread unless you miss the at&t bloatware
sent from my acidhazard thrill
wayno140 said:
Then there isn't much reason to switch to v20p if you are already on gingerbread unless you miss the at&t bloatware
sent from my acidhazard thrill
Click to expand...
Click to collapse
But aren't I missing one of the bands (or frequencies) that at&t uses?
I have never had too many troubles in service but I do notice I almost always have less bars than other At&t users in the same locations
No I was on the Thrill ATT baseband ....... This is just to go back to stock if you are already on US baseband....Sorry I should have been more clear..... Say you were using a custom rom like "AcuraTeam_v.20P" which was made for the thrill, and you wanted to go back to stock 2.3.5 but you didnt have a clockwork mod backup of it on your phone. If you were to try using the "LGMobile Support Tool" it would tell you that your phone was already up to date and didnt need updated. So to get around this without having to use KDZ files to get back to stock 2.3.5 you would install the O3D rom which changes the version number of the operating system which tricks the "LGMobile Support Tool" into going ahead and reloading the phone with the latest ATT update.
Hello there. I am running the official ICS XBSA404 port on my Trill, flashed with the LG tool. I am having some problems (camera is upside down and I have low ram). Phone is rooted without CWM recovery (for some reason it is impossible to install CWM recovery on it, it soft bricks). Can anyone PLEASE help me get back to stock?
Many thanks in advance...
Follow these instructions.
http://forum.xda-developers.com/showthread.php?t=1942836
Just curious but have you tried the custom version
http://forum.xda-developers.com/showthread.php?t=1963847
Are you having problems with signal.
95civicsi said:
Follow these instructions.
http://forum.xda-developers.com/showthread.php?t=1942836
Just curious but have you tried the custom version
http://forum.xda-developers.com/showthread.php?t=1963847
Are you having problems with signal.
Click to expand...
Click to collapse
Answering your question, I don't have service with a company in the U,S,A, anymore. Now I'm here just on vacations. I just purchased this Thrill without testing a sim card (I won't pay that expensive roaming from my overseas carrier). I plan to unlock it and use it there.
Thanks for the above link but... will this work on a Thrill (not optimus 3d)? I haven't tried the custom ICS yet, I would like to if it doesn't have those problems with the 3d camera. Can I move from the rooted Official ICS (no CWM) to the custom ICS?
domenicostorino said:
Answering your question, I don't have service with a company in the U,S,A, anymore. Now I'm here just on vacations. I just purchased this Thrill without testing a sim card (I won't pay that expensive roaming from my overseas carrier). I plan to unlock it and use it there.
Thanks for the above link but... will this work on a Thrill (not optimus 3d)? I haven't tried the custom ICS yet, I would like to if it doesn't have those problems with the 3d camera. Can I move from the rooted Official ICS (no CWM) to the custom ICS?
Click to expand...
Click to collapse
I don't think the 3D camera is fixed on any of the custom ones yet. I haven't checked in a bit, but from the last one I tried it wasn't. You're probably going to have to use CWM or TWRP to flash the custom ICS ROM as well.
The LG Optimus 3D and the the LG Thrill are essentially the same phone. The LG Thrill is the US version of the Optimus 3D. Those instructions will work with your phone. If you would like to install CWM you can use the following instructions to install the recovery.
http://forum.xda-developers.com/showthread.php?t=1859662
The download link is for the .apk file and is best downloaded from your phone, if that is possible. You need to be rooted for this to work. I am using the following ROM on my LG Thrill with excellent service.
http://forum.xda-developers.com/showthread.php?t=1956347
If you decide to use that ROM or one of the other Custom O3D ROMS, you will need a baseband called "LGP920AT-00-V18a-AMA-XXX-OCT-28-2011+0_CP.fls" to work in the US, found here
https://www.dropbox.com/sh/zv3qpd6jylvqg31/9jm_8omNov (Thanks Tactics119)
When you take the phone back overseas, you will need to change the baseband to one that works for your area. You can determine which one you need in this thread.
http://forum.xda-developers.com/showthread.php?t=1958484
You can obtain whichever baseband you choose, from the same place you got the previous one.
https://www.dropbox.com/sh/zv3qpd6jylvqg31/9jm_8omNov (Thanks Tactics119)
Hello. I was wondering when installing one of these basebands would you flash it in cwm?
Sent from my LG-P925 using xda premium
bigfoot.kom said:
Hello. I was wondering when installing one of these basebands would you flash it in cwm?
Sent from my LG-P925 using xda premium
Click to expand...
Click to collapse
No. You have to install the baseband and the original ICS port through lg flash tool if you are updating from gingerbread. If you already installed ICS then all you have to do is install the baseband through the same tool. But if you are flashing only the baseband, when it finishes it's going to say invalid ap path. When it tells me this, it flashed my baseband, but it normally has an AP (in this case, ICS) along with the CP (normally the baseband) which is why I think it gives this error message. So you can just restart your phone.
[Q]MY LG THRILL BUICKED,BUT WORKING NOW model LG-P925
My lg thrill was locked on the lg logo and would not boot or go at&t screen after the flashing of 2 roms acidhazardrom
1st Gingerbread 2.3 Stock_V20P_Rooted.zip but the sim card not showing up so I then 2nd flash froyo 2.2
update-thrill-stock-rom-rooted.zip after that completely locked to the lg logo and only load back to
recovery that i got from rom manager recovery-clockwork-6.0.1.9-p920.img. So then I had to try the how
to LG Flash Package V10C_00.kdz, but it only when 2minutes then when off so then i tryied flashing
froyo 2.2 update-thrill-stock-rom-rooted.zip again and it booted up operates just fine right now.
So my question is should i leave well enough alone or what should i do next?? And should i change recovery??
O.k. i tried to download from android market and i cant the lg thrill stops the download ready time. says error message (498) any answers
You can try to upgrade your thrill to gb using the lg updater tool from lg.
Sent from my LG-P925 using xda premium