Hello, I have a serious problem with my htc raider, is to install several rom and then install a telstra based on the internet and virtually no work is extremely dull to the point that I can not log into google play, and switch to more rom different and still the problem and occasionally does not go into recovery mode, someone please help me! thanks
This belongs in the general section
Please any further posts like this aka questions should be posted in the general section
sorry had 2 windows open and in my despair and I mistaken
CronosCR said:
sorry tenia 2 ventanas abiertas y en mi desesperacion me e equivocado
Click to expand...
Click to collapse
Si usted entra en fastboot y un flash de recuperación, entonces usted será capaz de acceder a la recuperación
*fastboot flash recovery "recoveryname".img*
http://translate.google.com
Hope that made sense:/ if your english is good enough to understand the following then good
If you can boot to fastboot flash a recovery there and then you will be able to go into recovery
I if I can get into fastboot the problem is that sometimes when I go to recovery restarts, but then when accessed by more recoveries or the new rom that I always keeping some kind of configuration (I realize it is always activated notification message box sent which I have never active) and I have something that interferes with the internet
Try running the stock RUU rom and then clear storage. and then again flash recovery and the rom you want.
stock RUU rom works perfect but when you install any other makes the problem
the problem started with this rom
http://forum.xda-developers.com/showthread.php?t=1613333
CronosCR said:
the problem started with this rom
http://forum.xda-developers.com/showthread.php?t=1613333
Click to expand...
Click to collapse
That one requires S-Off as told in the first post
http://unlimited.io Go there to get S-Off if you want it or find a rom not requiring S-off
I use Dark Raider ROM and Kozmikkernel, which works great..everything works fine...overclocked to 1.7 GHz..WiFi was lil tricky but worked fine when I set up manually...Dark Raider can be found here:
http://forum.xda-developers.com/showthread.php?t=1586613
PS...instructions say device must be S-Off but it worked fine for me with S-On...no need to hook up to computer...can all be done from phone..nice ROM..
Sent from my HTC PH39100 using xda premium
That will be the cause of my problem?
Related
i need help..
i bought a captivate at ebay.. at it's very functionally, but.. now it didnt boot... and it scratch when.. the logo of samsung galaxy is glowing!!!
the error is the SD internal card!! but which is the solution??
i'm a nooby... but i've a poor knowledgemente at windows OS!
i need your help
I have the same problem, do not mount sd card(see picture)
I guess nothing u can do to the internal one?
mismo problema
tengo un problema parecido estaba en ICS 4.0.3.collective fussion restableci de fabrica ,y ya no me reconoce la memoria interna la externa aparece como la .interna nunca me habia pasado y ahora estoy en 2.1: Confused:
Try flashing a rom with odin or heimdal that contains "dbdata.rfs" inside.
Sent from my GT-I9000 using XDA
flash a stock rom odin package found in the development section sticky
In my opinion it looks like this phone was a victim of the Encryption Unsuccessful problem. Please see this thread for more info: forum.xda-developers.com/showthread.php?t=1447303. The pictures in that thread won't look like what you have now but the issue you are having sounds exactly like it. Good Luck
jeff.leonard said:
In my opinion it looks like this phone was a victim of the Encryption Unsuccessful problem. Please see this thread for more info: forum.xda-developers.com/showthread.php?t=1447303. The pictures in that thread won't look like what you have now but the issue you are having sounds exactly like it. Good Luck
Click to expand...
Click to collapse
this is the problem I had was, took the instructions and fixed the problem.
thank you
encryption
I don't have enough posts to ask in development so I will here, if I were to repartition my internal and external SD card so the emmc was first would this make my internal SD card safe from being encrypted. Just wondering if it would encrypt the external instead.
I was wondering because one of my captivates got the encryption unsuccessful deal and am thinking if it happened to my other phone it would encrypt the external then at least the phone would still be fully operational if it where to get the encryption message
lesterkravitz said:
I was wondering because one of my captivates got the encryption unsuccessful deal and am thinking if it happened to my other phone it would encrypt the external then at least the phone would still be fully operational if it where to get the encryption message
Click to expand...
Click to collapse
I'm gonna say yes, long as you follow the instructions the phone is ignoring the existence of the internal. Tho I don't see that being a good idea, but if you wanted to only try out ICS then it would be tolerable for a while.
Tho it's gotten a fair bit of press here the encryption issue is still few and far between. A good percent of the xda-captivate population (myself included) have been running ICS for well over a month and have not gotten that fault.
leaked from my ICS- FUSED SGS I897 contaminating you via XDA app.
What would be the disadvantage wouldn't the two SD cards just be switched so the internal would be the external and the external would be internal. I have the reverse fix on my encrypted captivate and have not noticed any performance or usability difference.
This build is for development purposes only. Do not distribute outside of HTC whitout HTC's written permission. failure to comply may lead to legal action.
how to make it disappear? pls
argados said:
This build is for development purposes only. Do not distribute outside of HTC whitout HTC's written permission. failure to comply may lead to legal action.
how to make it disappear? pls
Click to expand...
Click to collapse
You can't as far as I'm aware , just ignore it till it boots into your chosen rom , it does no harm unless you plan to lock the phone and sell it where I would guess it will disappear ?
Sorry I have no experience in this as I've never relocked a phone
whoamigriffiths said:
You can't as far as I'm aware , just ignore it till it boots into your chosen rom , it does no harm unless you plan to lock the phone and sell it where I would guess it will disappear ?
Sorry I have no experience in this as I've never relocked a phone
Click to expand...
Click to collapse
the problem is that i ca not ignore it because the phone stays at htc white screen whit that text below and doesent do anithing else.
some one please help me !!!!
argados said:
the problem is that i ca not ignore it because the phone stays at htc white screen whit that text below and doesent do anithing else.
some one please help me !!!!
Click to expand...
Click to collapse
are you saying you followed a guide here,rooted the phone,installed cw or twrp,flashed a kernel,installed a rom,and now this is where you are at because of this?
argados said:
the problem is that i ca not ignore it because the phone stays at htc white screen whit that text below and doesent do anithing else.
some one please help me !!!!
Click to expand...
Click to collapse
What was the last thing you did before that happened? Please give us some more details
aashay960 said:
What was the last thing you did before that happened? Please give us some more details
Click to expand...
Click to collapse
Sorry I am a bit slow to reply . Yes sounds like a problem .
As saskrider asks did you follow the instructions here How to unlock your phone by Air Combat
i was tring to instal JellyTime-CM10.1-R06.1-BLINDNDUMB after using the htcdev and a root and than that red text apeard and no i was not useing a tutorial from this forum because i didnt know about it a friend told me about this.
so should i try to instal something else?
argados said:
i was tring to instal JellyTime-CM10.1-R06.1-BLINDNDUMB after using the htcdev and a root and than that red text apeard and no i was not useing a tutorial from this forum because i didnt know about it a friend told me about this.
so should i try to instal something else?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1947613
Read this thread. It was the first thread I read when I joined and I consider myself very lucky for that.
Make sure you follow ALL the steps..
Now please answer a few questions..
1) Are you able to boot into bootloader mode? (using volume down and power button)
2) Does it say unlocked?
3) Did you find the rom on this forum?
4) Did you install a custom recovery like CWM or TWRP?
First read that thread
Edit: Wait a second.. CM 10.1??
Bro, you can only install desire c roms on your phone, you may br mistaken but roms are ABSOLUTELY NOT INTERCHANGABLE. Try flashing a rom from the desire c android development forums.
0118 999 881 999 119 7253
Phenziox, i beg to differ so much, PM me and i'll tell you something i did that worked it's secret though so shhhh
un brick my htc desire c for cricket wireless?
hey there,bricked my htc desire c for cricket wireless and now no image is found when i go to recovery it just leads me to bootloader mode.i unlocked it the first time..but relocked it hoping it would fix the probplem!now im stuck on bootloader image and it wont boot normaly?curious to know if there is a way to unbrick my htc desire c from cricket wireless?sucks cause i barely got it like 2 weeks ago!please help!
how to unbrick htc desire c from cricket
just wanted to know if there is a method outthere that can unbrick my htc desire c from cricket?on hboot it says no image found etc...please help!
616Rick said:
just wanted to know if there is a method outthere that can unbrick my htc desire c from cricket?on hboot it says no image found etc...please help!
Click to expand...
Click to collapse
First download a recovery image. Save it in the platform tools folder of your android SDK install.
Go to bootloader, plug your USB cable into the PC, enter fastboot. On your PC navigate to the platform tools folder again, Ctrl+shift + right click and select "open command window here", or something similar. Type fastboot devices to see if your phone is connected. Then fastboot erase cache and fastboot flash recovery <name of your recovery image>.img plug out your cable and try to boot into recovery.
Should fix it
unbrick htc desire c for cricket
where can i find the recovery image for the htc desire c for cricket?can u send me a link of all the necessay files i need to unbrick the phone?much appreciated!
i have the same trouble
aashay960 said:
http://forum.xda-developers.com/showthread.php?t=1947613
Read this thread. It was the first thread I read when I joined and I consider myself very lucky for that.
Make sure you follow ALL the steps..
Now please answer a few questions..
1) Are you able to boot into bootloader mode? (using volume down and power button)
2) Does it say unlocked?
3) Did you find the rom on this forum?
4) Did you install a custom recovery like CWM or TWRP?
First read that thread
Edit: Wait a second.. CM 10.1??
Click to expand...
Click to collapse
i can't get into the bootloader mode, the phone frozen in the htc white screem... please help me
Boot.img problem!
saskrider said:
are you saying you followed a guide here,rooted the phone,installed cw or twrp,flashed a kernel,installed a rom,and now this is where you are at because of this?
Click to expand...
Click to collapse
Hi to all, I am using htc desire c golfu and I am facing a problem with cwm red message "this build is for development purposes only" specially when i am trying to install via fastboot any boot.img (such as kernel or rom image that is responsible for wifi to work and the phone doesn't boot to homescreen, reboots again with the htc logo and cwm red message below)!. (As with Nameless rom guide,What i haven't done in those two ways i tried to install the images was to take out the battery, I boot to bootloader by holding volume down + Power!
So, what I had to do 2 times, was to relock and flash again the stock rom!
P.S. I don't have a problem installing rom zips with sdcard
Thanks for the help!
lbchX said:
Hi to all, I am using htc desire c golfu and I am facing a problem with cwm red message "this build is for development purposes only" specially when i am trying to install via fastboot any boot.img (such as kernel or rom image that is responsible for wifi to work and the phone doesn't boot to homescreen, reboots again with the htc logo and cwm red message below)!. (As with Nameless rom guide,What i haven't done in those two ways i tried to install the images was to take out the battery, I boot to bootloader by holding volume down + Power!
So, what I had to do 2 times, was to relock and flash again the stock rom!
P.S. I don't have a problem installing rom zips with sdcard
Thanks for the help!
Click to expand...
Click to collapse
You need to have your bootloader unlocked. Install a custom rom and then install a kernel. Make sure you full wipe before you install the rom. Try the lowest possible frequency. Make sure you have the correct kernel.
me4488 said:
You need to have your bootloader unlocked. Install a custom rom and then install a kernel. Make sure you full wipe before you install the rom. Try the lowest possible frequency. Make sure you have the correct kernel.
Click to expand...
Click to collapse
I have to mention that I have done the root two times (I have a backup, full wipe with cwm and then flash zip from the card), but i stacked when I had to flash the boot.img (first was when I have flashed the "auto boot img" from revolution mod 3vs3 for fixing the wifi & second when I wanted to flash a nope kernel img with revolution job rom)! It's like the phone doesn't want the command boot.img (even though I see on my screen that it has been flashed but when I reboot, cwm red message appears)!
Try lower MHz kernel
Sent from my HTC Desire C using xda app-developers app
argados said:
This build is for development purposes only. Do not distribute outside of HTC whitout HTC's written permission. failure to comply may lead to legal action.
how to make it disappear? pls
Click to expand...
Click to collapse
to disapear this you have to unroot your device
PLEASE... HELP ME...URGENT
Motorola Razr I XT890 that I bought earlier this year. Never had any problems with it, but on Friday, he turn off from nothing and not turn on. It is not because of apps, because made for a week since i does not install anything. When I enter in the mode Fastboot and select anything (i know for to select, I have to press the VOL +) it just shows again logo from Motorola, and if I enter the mode recovery, however complicated it is, because sometimes it works and other sometimes not ... I can not make format or install anything, so I can not even turn on my phone.
Please help me.
I apologize for my English.
GRATEFUL
miniprof said:
PLEASE... HELP ME...URGENT
Motorola Razr I XT890 that I bought earlier this year. Never had any problems with it, but on Friday, he turn off from nothing and not turn on. It is not because of apps, because made for a week since i does not install anything. When I enter in the mode Fastboot and select anything (i know for to select, I have to press the VOL +) it just shows again logo from Motorola, and if I enter the mode recovery, however complicated it is, because sometimes it works and other sometimes not ... I can not make format or install anything, so I can not even turn on my phone.
Please help me.
I apologize for my English.
GRATEFUL
Click to expand...
Click to collapse
Does your computer detect the phone?
Hashmutz said:
Does your computer detect the phone?
Click to expand...
Click to collapse
Unfortunately it does not detect ...
I've tried everything
If you have warranty just give it to repair, if it broke without you doing anything it can be hardware thing.
Sent from my XT890 using xda app-developers app
Please give more details about your phone
Is it unlocked, rooted, something like this? Did you ever tried to flash or modify its software in any way?
Unmodified devices should not stop working "assim do nada". If it's unmodified, you should take it to the closest motorola repair center along with the "Nota Fiscal" (I guess you are Brazilian) or else the warranty certificate. They fix it in a couple days or give you a new phone.
If it's unlocked, I would start by trying to erase and format data partition, then flash an original system.img all by using fastboot (or mfastboot) command line.
You can also try to use RSD Lite to flash an entire new original firmaware into the phone.
Fastboot work, so you should install fresh firmware with rsd lite. Only don't install older version of android.
Enter fastboot, connect to PC, run rsd lite, should see your phone, of curse if you have installed drivers.
Wysyłane z mojego XT890 za pomocą Tapatalk 2
leonelsr said:
Please give more details about your phone
Is it unlocked, rooted, something like this? Did you ever tried to flash or modify its software in any way?
Unmodified devices should not stop working "assim do nada". If it's unmodified, you should take it to the closest motorola repair center along with the "Nota Fiscal" (I guess you are Brazilian) or else the warranty certificate. They fix it in a couple days or give you a new phone.
If it's unlocked, I would start by trying to erase and format data partition, then flash an original system.img all by using fastboot (or mfastboot) command line.
You can also try to use RSD Lite to flash an entire new original firmaware into the phone.
Click to expand...
Click to collapse
Boa tarde....deu na cara que sou Brasileiro né...hehehe
Bom...Sinceramente, este é o primeiro aparelho que compro e não faço nenhuma modificação nele...realmente não alterei nada, não desbloquiei ele...não fiz absolutamente nada...vou levá-lo hoje a uma autorizada...e vamos ver o que dá.
Obrigado.
adddaamo said:
If you have warranty just give it to repair, if it broke without you doing anything it can be hardware thing.
Sent from my XT890 using xda app-developers app
Click to expand...
Click to collapse
Yeah, I'll take it today for authorized ... thank you for responding.
adddaamo said:
If you have warranty just give it to repair, if it broke without you doing anything it can be hardware thing.
Sent from my XT890 using xda app-developers app
Click to expand...
Click to collapse
Yeah, I'll take it today for authorized ... thank you for responding.
If someone helped you, always remember to hit the Thanks button!
Good luck with your phone!
after the update, it stopped working wifi and bluetooth appears in the video What happens, and I can not solve. I've restored it and did everything but nothing worked.
This is the video:
>>>>youtube.com / watch? v = girqFv6eWnQ<<<<
hannoshi said:
after the update, it stopped working wifi and bluetooth appears in the video What happens, and I can not solve. I've restored it and did everything but nothing worked.
This is the video:
>>>>youtube.com / watch? v = girqFv6eWnQ<<<<
Click to expand...
Click to collapse
Most likely your /persist partition is damaged somehow. See this thread: http://forum.xda-developers.com/moto-x/moto-x-qa/wifi-isnt-t2760479
I see but my moto x is not rooted.. I just upgrade him to kitkat 4.4.3 and them the WiFi and Bluetooth stop working. I don't know what to do.. If you can watch the video that I send it for u understand better. Thank you
Sent from my XT1058 using XDA Free mobile app
hannoshi said:
I see but my moto x is not rooted.. I just upgrade him to kitkat 4.4.3 and them the WiFi and Bluetooth stop working. I don't know what to do.. If you can watch the video that I send it for u understand better. Thank you
Sent from my XT1058 using XDA Free mobile app
Click to expand...
Click to collapse
I did watch the video. If you are not rooted, I doubt it has anything to do with /persist.
My suggestion is to flash the entire stock SBF file for your carrier. This is possible, even with a locked bootloader because it is signed with release keys.
Follow the instructions in the "Return to Stock" thread (I suggest using the manual method), and let us know if that solves your problem.
SBFing back to stock can actually repair a corrupted filesystem - a factory reset can not.
This is your best bet to fix the issue. If you try and it does not work, likely you have a hardware issue.
Good Luck
nothing work
samwathegreat said:
I did watch the video. If you are not rooted, I doubt it has anything to do with /persist.
My suggestion is to flash the entire stock SBF file for your carrier. This is possible, even with a locked bootloader because it is signed with release keys.
Follow the instructions in the "Return to Stock" thread (I suggest using the manual method), and let us know if that solves your problem.
SBFing back to stock can actually repair a corrupted filesystem - a factory reset can not.
This is your best bet to fix the issue. If you try and it does not work, likely you have a hardware issue.
Good Luck
Click to expand...
Click to collapse
nothing work! i did all and nothing ;(
hannoshi said:
nothing work! i did all and nothing ;(
Click to expand...
Click to collapse
I suspect a hardware failure of the wifi chipset (and/or componets) itself. Sorry, I don't have any further suggestions....
I already figured out how to solve ... But is unstable .. From nothing he can give back the error again. Charge your phone on up to 90% then turn it is to hopefully connect the load 100% then turn the cel will come back and the wifi and Bluetooth. After a while the cel can reset itself back .. And the bug. But for now it is the best solution.
I'm thinking of the relationship between battery life and wifi and bluetooth drivers, I think maybe the battery saving mode is forcing a shutdown of radio wifi and BT, no he can reactivate alone .... Makes sense .. I activated the battery mode and the wifi crashed ... I turned off and restarted the cel and has returned to normal ... q be a way to disable the battery mode without activate it alone.
Sent from my XT1058 using XDA Free mobile app
HELLPpPpPpPppPpPPpPpPpP
hannoshi said:
I already figured out how to solve ... But is unstable .. From nothing he can give back the error again. Charge your phone on up to 90% then turn it is to hopefully connect the load 100% then turn the cel will come back and the wifi and Bluetooth. After a while the cel can reset itself back .. And the bug. But for now it is the best solution.
I'm thinking of the relationship between battery life and wifi and bluetooth drivers, I think maybe the battery saving mode is forcing a shutdown of radio wifi and BT, no he can reactivate alone .... Makes sense .. I activated the battery mode and the wifi crashed ... I turned off and restarted the cel and has returned to normal ... q be a way to disable the battery mode without activate it alone.
Sent from my XT1058 using XDA Free mobile app[/QUO
tengo el mismo problema HANNOSHI, puedes ayudarme? te dejo mi FACEBOOK, me sucede lo mismo, he navegado en toda la web y no encuentro una solución, TENGO tambien un MOTO X..............solo pude reparar un moto g, insertando el WCNSS_qcom_wlan_nv.bin en la carpeta PERSIS y le puse la mac del wifi y reinicie. con eso solucione el problema en el moto g, pero en el MOTO X quise hacer lo mismo y no se pudo. contesta te dejo mi FACEBOOK...........................BROSTER.LAZCANO:crying::crying::crying:
Click to expand...
Click to collapse
hey,guys.
I ask you specifically how to solve it? I have a problem with you,XT1058.
Help with my HTC Desire 500
Ok sorry for my bad English, but I'm from Mexico and this forum it is English and used a translator for this case hah ._.
Well first I think hice algo wrong with my device, the problem was quize install the ROM James and followed all the steps of several videos and post and so good I thought I had succeeded so far to enter the recovery mode to install CMW read before installing I had to remove the entire device to defectosal not have time to install the zip, so I agreed to install the rom and everything well until three seconds of the phone installation and the abortion did not know why and what Maybe I decided to go back to the beginning and restart.
But my real problem is not the advancement of the home screen, just off the classic vibe presentation does not advance HTC more
I can go into recovery mode again and CMW but I can not move from there. Any of you who can help in this case, I am new to this and I assumed it would be easy, but since my last hope is to take to fix, and thanks for helping or at least go read my post, I hope I offended anyone.