[Q] Criskelo ICS ROM v2 install - Galaxy Note GT-N7000 Q&A, Help & Troubleshooting

hi there,
first off, im sorry for being a total noob.
i was trying to look for a full guide to install Criskelo ICS ROM v2.
i found an online guide from the site rootgalaxynote dot com
but its for the older version.
i was wondering if i can do this step but install using the V2 or follow the steps, install the older version then use clockworksmod to load v2?
once again, please accept my apologies as i have never touched an android in my life.. im so new, my note is still in the mail and i havent even received it yet.

Go the the development section find criskelo v2 and follow the instructions in the first post? Why go to another site when the instructions are right here
.....
Sent from my GT-N7000 using Tapatalk 2

hi there,
i was there, the thing is that i want to make sure i understand the instructions the instructions
From GB:
Install ics repack by chainfire via mobile odin-reboot-reboot into revovery-full wipe-install criskelo ics.
Click to expand...
Click to collapse
so before i run the steps above, i should install clockworkmods and titanium backup to backup my current rom and apps rite?
then i download the ics repack by chainfire and the criskelo v2 mod
then install mobile odin and install the mod?

Very simple as ABC.
First you use PC odin and flash a single file called chain fire repack.tar
This ROM is already rooted.
Boot up and install triangleaway1.25.apk
Copy your ROM to SDcard
Reboot to recovery using the CWM app in Your note
Wipe data.factory reset wipe the other one below the list. I forgotten the name
Wipe devalik cache from advance settings
Install the zip file called Criskelo or any other ROM from Sdcard.
Once you are done reboot and enjoy your new rom.
Sent from my GT-N7000 using XDA

gtee said:
Very simple as ABC.
First you use PC odin and flash a single file called chain fire repack.tar
This ROM is already rooted.
Boot up and install triangleaway1.25.apk
Copy your ROM to SDcard
Reboot to recovery using the CWM app in Your note
Wipe data.factory reset wipe the other one below the list. I forgotten the name
Wipe develik cache from advance settings
Install the zip file called Criskelo ROM from Sdcard.
Once you are done reboot and enjoy your new rom.
Sent from my GT-N7000 using XDA
Click to expand...
Click to collapse
GREAT!! thats the best information i've got so far... thank you kindly....
i really appreciate it...
one more question, by following the instructions above, will the phone be overclockable? (just wondering.. doesnt matter if it doesnt..)

vyraz said:
GREAT!! thats the best information i've got so far... thank you kindly....
i really appreciate it...
one more question, by following the instructions above, will the phone be overclockable? (just wondering.. doesnt matter if it doesnt..)
Click to expand...
Click to collapse
No, you can't overclock any of the ICS kernels for the time being.

chasmodo said:
No, you can't overclock any of the ICS kernels for the time being.
Click to expand...
Click to collapse
i see.. ok.. no prob.. dont really need that much juice anyway.. for now that is...
do you guys recomend i root my GB in stock condition then backup with CWM first? just so i can revert much later on in case bad stuff happens?

always make a backup incase of anything going wrong

gtee said:
Very simple as ABC.
First you use PC odin and flash a single file called chain fire repack.tar
This ROM is already rooted.
Boot up and install triangleaway1.25.apk
Copy your ROM to SDcard
Reboot to recovery using the CWM app in Your note
Wipe data.factory reset wipe the other one below the list. I forgotten the name
Wipe develik cache from advance settings
Install the zip file called Criskelo ROM from Sdcard.
Once you are done reboot and enjoy your new rom.
Sent from my GT-N7000 using XDA
Click to expand...
Click to collapse
This does however increase the binary counter thus voiding warranty. By taking some extra steps you'll be able to upgrade to any ICS rom without increasing the binary counter.
What I did was I flashed one of the pre-rooted roms found in a thread in the dev section. After that I flashed the CF Root kernel for the rom I installed (I used the pre-rooted LA6 rom so I used the CF kernel for LA6).
Now you have full root and CWMR so you can flash any rom you like. For ICS roms, install Mobile Odin, flash the ICS LP1 repack, reboot to recovery, do a full wipe and install any ICS rom you want to try.
Pre-rooted stock roms: http://forum.xda-developers.com/showthread.php?t=1535025
For CF-Kernel check step two "2. I Want ROOT + CWM" of this thread and download the appropriate files for the pre-rooted kernel you flashed: http://forum.xda-developers.com/showthread.php?t=1329360

This is what triangle away is for.
Resetting the counter to none!
Sent from my GT-N7000 using XDA

gtee said:
This is what triangle away is for.
Resetting the counter to none!
Sent from my GT-N7000 using XDA
Click to expand...
Click to collapse
thats what i was thinking...

gtee said:
This is what triangle away is for.
Resetting the counter to none!
Sent from my GT-N7000 using XDA
Click to expand...
Click to collapse
To my knowledge Triangle Away only does exactly what is says, it will remove the yellow triangle after you've flashed a custom kernel through pc Odin and thus having triggered the binary counter. To my knowledge Triangle Away is not able to reset the counter though I could be wrong as I've never used it myself. There is however a thread explaining how to remove both the triangle and reset the counter using a usb JIG: http://forum.xda-developers.com/showthread.php?t=1354888

Counter is reset
using triangle away does reset the counter as well as removing the triangle also says your rom is samsung original even if it is not!.
you must use the correct ics version to do this one that does work is I9220LP1-N7000-ICS-REPACK worked just fine on my note. It does not work on all current versions of ICS. enjoy

Thanks a lot for the info! I really didn't know and I thought I read somewhere that it didn't reset the counter.

does the triangle away work for GB phones? just wondering

No
Sent from my GT-N7000 using XDA

Other way you could try
Hi, maybe you already flashed, but this is how I did it. No problems at all.
Starting from stock GB. (Or you can flash stock through ODIN)
Used CF-Root to get Root and CWR on the phone.
Downloaded and flashed Abyss Kernel 4.2
rebooted recovery
flashed ICS ROM from sdcard.
Worked perfectly well for me.
Hope this helps.

rupalazzi said:
Hi, maybe you already flashed, but this is how I did it. No problems at all.
Starting from stock GB. (Or you can flash stock through ODIN)
Used CF-Root to get Root and CWR on the phone.
Downloaded and flashed Abyss Kernel 4.2
rebooted recovery
flashed ICS ROM from sdcard.
Worked perfectly well for me.
Hope this helps.
Click to expand...
Click to collapse
i see... so ics will work on the abyss 4.2 rom? cool...
sadly... i havent been able to do anything on my phone... it hasnt arrived yet.. and yesterday i got a call from the provider saying its gonna EVEN more delayed

vyraz said:
i see... so ics will work on the abyss 4.2 rom? cool...
sadly... i havent been able to do anything on my phone... it hasnt arrived yet.. and yesterday i got a call from the provider saying its gonna EVEN more delayed
Click to expand...
Click to collapse
As soon as you flash the rom, abyss kernel will be overwitten (you get CWM).
Now a piece of advice, there are great risk on flashing any rom based on leak repack, there is an issue with the kernel and the eMMC, which basically can fry your phone (if you are unlucky).
I personally decided to flash back to stock GB.... just in case. I'm not willing to gamble with my note, but that is me.
Sent from my GT-N7000 using XDA

rupalazzi said:
As soon as you flash the rom, abyss kernel will be overwitten (you get CWM).
Now a piece of advice, there are great risk on flashing any rom based on leak repack, there is an issue with the kernel and the eMMC, which basically can fry your phone (if you are unlucky).
I personally decided to flash back to stock GB.... just in case. I'm not willing to gamble with my note, but that is me.
Sent from my GT-N7000 using XDA
Click to expand...
Click to collapse
thanks for the input... was kinda thinking that while doing alot of reading... im still considering a GB rom or an ICS rom

Related

[Q] ICS Stunner to gb

Hi All,
I'm on ics stunner 1.4.26_1 LP6 kernel. I wish to go back to stock GB after seeing some bricked notes. whats the best way to go about it?
can i just download the stock firmware i was using before from samfirmware and simply flash pda using ODIN desktop?
if so, any options i should check before flashing?
many thanks!
http://forum.xda-developers.com/showthread.php?p=25181479
Sent from my GT-N7000 using xda premium
Solution
Here's what I Did:
Downloaded the stock jpkk2 firmware from sammobile.com
Used PC ODIN to flash the stock ROM. Re-Partition option was not selected.
Once done, the phone rebooted and went into a bootloop.
To cure that I went into recovery and did a factory reset, Wipe Cache and next time it rebooted normally.
For those who had the same situation as mine and dont wish to go into lengthy procedure in the linked thread above, you can do what i did
jakhan86 said:
Here's what I Did:
Downloaded the stock jpkk2 firmware from sammobile.com
Used PC ODIN to flash the stock ROM. Re-Partition option was not selected.
Once done, the phone rebooted and went into a bootloop.
To cure that I went into recovery and did a factory reset, Wipe Cache and next time it rebooted normally.
For those who had the same situation as mine and dont wish to go into lengthy procedure in the linked thread above, you can do what i did
Click to expand...
Click to collapse
+1 to that. I used the exact same procedure, everything went fine and I'm now running RocketROM v23, as I think it's the ok-est ROM so far on GB
I do so miss ICS though sometimes...
EDIT: apparantly I might be very wrong.
bioweb said:
If you already flashed Stunner then in my opinion you have nothing to worry about. Once the rom is flashed your phone won't magically brick itself at some point.
Click to expand...
Click to collapse
According to the opinion of Entropy512, you may indeed have something to worry about. Even after flashing your eMMC can still be damaged. No offence, but I'm more inclined to believe him than you!
Some posts that might be of interest to you:
http://forum.xda-developers.com/showpost.php?p=25356877&postcount=28
http://forum.xda-developers.com/showpost.php?p=25385420&postcount=69
Neh, don't trust those guys that know what they're talking about, have faith in little old me
That's troubling news indeed. I've done a crapload of wiping and flashing ICS roms and kernels but so far I've had no problems whatsoever. But after reading that thread I might just revert back to a GB rom. I love Stunner's rom and ICS in general but would be devastated if my Note cries 'mein Leben' a week before the official, hopefully problem-free ICS update.
I hope Samsung is aware of these faulty driver settings, otherwise we'll see loads of bricked Notes in a couple of weeks.
bioweb said:
Neh, don't trust those guys that know what they're talking about, have faith in little old me
That's troubling news indeed. I've done a crapload of wiping and flashing ICS roms and kernels but so far I've had no problems whatsoever. But after reading that thread I might just revert back to a GB rom. I love Stunner's rom and ICS in general but would be devastated if my Note cries 'mein Leben' a week before the official, hopefully problem-free ICS update.
I hope Samsung is aware of these faulty driver settings, otherwise we'll see loads of bricked Notes in a couple of weeks.
Click to expand...
Click to collapse
Yes, it's very troubling! I've changed to the DAFUQ kernel, which is not based on the faulty Samsung leaks and is supposedly safe. It's a little bit buggy on Stunner (no boot anim, sometimes colours are screwed up and you have to turn the screen on and off, but no major bugs so far). For me it beats going back to GB because I simply love tablet mode. EDIT: Also, no external sdcard...
Personally I think a big fat warning about the leaked kernels should be stickied on the forum or something because lots of people don't seem to be aware of the issues, including more experienced members.
I just flash abysnotekernel and restore my GB backup. It takes less then 5 mins.
bioweb said:
Neh, don't trust those guys that know what they're talking about, have faith in little old me
That's troubling news indeed. I've done a crapload of wiping and flashing ICS roms and kernels but so far I've had no problems whatsoever. But after reading that thread I might just revert back to a GB rom. I love Stunner's rom and ICS in general but would be devastated if my Note cries 'mein Leben' a week before the official, hopefully problem-free ICS update.
I hope Samsung is aware of these faulty driver settings, otherwise we'll see loads of bricked Notes in a couple of weeks.
Click to expand...
Click to collapse
are you implying ICS is coming to Note in two weeks? any official word on it?
Sorry to hijack the thread, I just downgraded from STUNNER to GB,
Flashed the pre-rooted "N7000DXLC2_CSC_N7000OLBLC2",
how can I install CWM on this? I don't find any thread for LC2 installation.
Thanks...
luckygolf said:
Sorry to hijack the thread, I just downgraded from STUNNER to GB,
Flashed the pre-rooted "N7000DXLC2_CSC_N7000OLBLC2",
how can I install CWM on this? I don't find any thread for LC2 installation.
Thanks...
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1329360
I checked this thread where they post all the rooted kernels and CWM for those ROMS. LC2 is not in the list. Why not flash a compatible ROM from that thread?
jakhan86 said:
are you implying ICS is coming to Note in two weeks? any official word on it?
Click to expand...
Click to collapse
Oh, no, haha, sorry for the misunderstanding. It was just an example of Murphy using his law to mess up my Note right before ICS is finally released
bioweb said:
Oh, no, haha, sorry for the misunderstanding. It was just an example of Murphy using his law to mess up my Note right before ICS is finally released
Click to expand...
Click to collapse
lol. I got excited!
i just went back to GB (cassie's Xtralite rom) from stunner using Chasmodo's method mentioned.
install abyss kernel 4.2
reboot into recovery
do the wiping
install custom GB rom
no problems whatsoever.
vivek2701 said:
i just went back to GB (cassie's Xtralite rom) from stunner using Chasmodo's method mentioned.
install abyss kernel 4.2
reboot into recovery
do the wiping
install custom GB rom
no problems whatsoever.
Click to expand...
Click to collapse
Unless I've misunderstood Entropy512s posts on the matter, you still risked a hardbrick because you used the leaked kernel in stunner to flash the abysskernel.
The safest way to revert to GB is to flash an original or prerooted ROM using PC Odin thusly:
1. Odin flash a prerooted rom from here:
http://forum.xda-developers.com/showthread.php?t=1535025
Do a factory reset wipe from the recovery menu (volume up + home + power) if you are stuck in a boot loop.
2. Flash a CF-rooted kernel from here:
http://forum.xda-developers.com/showthread.php?t=1331784
3. Flash your preferred flava from CWM
Sent from my GT-N7000 using xda premium
For me this is the safest way to do this:
1. Download the Abyss 4.2 Red Pil kernel and put it on your internal sd card.
2. Boot into recovery
3. Flash the Abyss kernel and do not exit recovery yet
4. Go to the advanced menu and choose"reboot recovery"
5. Now you're in the Red Pil recovery
6. Wipe Cache, then Wipe Dalvik Cache, then Wipe data/factory settings
7. Install the GB Rom of your choice
8. Reboot. At this point, I leave the phone alone for 10 minutes - I don't set up anything, just let the phone sit. Then I reboot again.
9. Set up your phone and enjoy
glensta said:
For me this is the safest way to do this:
1. Download the Abyss 4.2 Red Pil kernel and put it on your internal sd card.
2. Boot into recovery
3. Flash the Abyss kernel and do not exit recovery yet
4. Go to the advanced menu and choose"reboot recovery"
5. Now you're in the Red Pil recovery
6. Wipe Cache, then Wipe Dalvik Cache, then Wipe data/factory settings
7. Install the GB Rom of your choice
8. Reboot. At this point, I leave the phone alone for 10 minutes - I don't set up anything, just let the phone sit. Then I reboot again.
9. Set up your phone and enjoy
Click to expand...
Click to collapse
Technically you could still brick your Note because you're flashing Abyss with the flawed ICS kernel you're on. I did the same however to revert back to a GB rom (thanks again pboesboes for posting the links) and at the moment I'm using Checkrom with Abyss 4.2 and Nemus Launcher.
To make absolutely sure you won't run into any problems Hawklan_D's method is the safest.
Hawklan_D said:
Unless I've misunderstood Entropy512s posts on the matter, you still risked a hardbrick because you used the leaked kernel in stunner to flash the abysskernel.
The safest way to revert to GB is to flash an original or prerooted ROM using PC Odin thusly:
1. Odin flash a prerooted rom from here:
http://forum.xda-developers.com/showthread.php?t=1535025
Do a factory reset wipe from the recovery menu (volume up + home + power) if you are stuck in a boot loop.
2. Flash a CF-rooted kernel from here:
http://forum.xda-developers.com/showthread.php?t=1331784
3. Flash your preferred flava from CWM
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Thanks for that... But it wont get bricked now?? Right...?
Lol all is good when the end is good..
Sent from my GT-N7000 using Tapatalk
vivek2701 said:
Thanks for that... But it wont get bricked now?? Right...?
Lol all is good when the end is good..
Sent from my GT-N7000 using Tapatalk
Click to expand...
Click to collapse
I'm not the person to say for sure, but I think if you've successfully flashed away from the leak repack ICS kernels by whatever method with no ill effects, you're in the clear.
That's my hope anyway, having messed with a lot of the flashing methods / kernels with (touch wood) no damage to my Note.
Sent from my GT-N7000 using xda premium

[Q] I've flashed ICS with cf-root, am i stuck on it????

So I came from ICS stunner to stock ICS WITH cf-root kernel using mobile Odin pro, it's working fine but it's not nearly as good as stunner our even rocket ROM v23....basically with all the scare stories about bricking when using cwmr to restore or wipe, etc should I wait for something new our just try to restore my backup?????
Any advice greatly appreciated thanks
martyj999 said:
So I came from ICS stunner to stock ICS WITH cf-root kernel using mobile Odin pro, it's working fine but it's not nearly as good as stunner our even rocket ROM v23....basically with all the scare stories about bricking when using cwmr to restore or wipe, etc should I wait for something new our just try to restore my backup?????
Any advice greatly appreciated thanks
Click to expand...
Click to collapse
As of now donot use CWM.Avoid it completely.Stock ICS with root doesnot make any problem.Its the CWM which causes bricks...If you need,you can flash the rom again using mobile odin with inject su,ever root,and inject mobile odin options ticked but donot flash cf-root kernel.
In genneral, just dont do anything in the recovery, cf or stock. There is one possible brick case from wiping in stock recovery. If you want to be safe, use PC odin to flash back to GB and wait for futher clerification.
Sent from my GT-N7000 using Tapatalk 2
liltennisdudexx said:
In genneral, just dont do anything in the recovery, cf or stock. There is one possible brick case from wiping in stock recovery. If you want to be safe, use PC odin to flash back to GB and wait for futher clerification.
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
As of now problem was reported with CWM only.Stock recovery is safe for your info
vijai2011 said:
As of now problem was reported with CWM only.Stock recovery is safe for your info
Click to expand...
Click to collapse
That's not correct. At least one user hardbricked when doing a reset from stock Recovery.
I was in the exact same position as the OP.
But, and there is a capital But - I never used CWM.
I recovered using PIT and a GB Stock ROM.
Edit: Sorry posted in the wrong thread - Was so excited because I recovered my Note.
Thanks for the feedback
Thanks guys,
currently running rocket lpy v1, just flashed over stock ics with no wipe, all running fine now, may give stunner another go - not really finding much benefit from samsung only junk.
Thanks again, loving the note, loving the forum and loving the diversity - never get tired of my mobile again!!!!

(help) gb rooted + cwm to flash custom ics roms

hey guys i just want some help because am planin to flash ics roms so i need a stock gb rooted + cwm ? download link ?
my quss
1- can i flash that rooted gb with cwm on odin pc without gettin the yallow triangle if there's not rooted gb with cwm then please provide me a link of gb rooted so i can use mobile odin to flash Abyss kernel 4.2
2- when i decide to go back from ics rom i should flash Abyss kernel in recover then reboot recovery then how can i flash the stock gb rooted in recovery or should i have a custom gb rom for it to be zip so i can flash it in recovery or should i just flash rooted stock gb with odin pc directly from ics rom ?
i know that i can do wiping things and factory data on ics and pleaes correct me if i said anything that would brick my phone thaank you so much you all for any help
am just worried i don't wanna brick my lovely Note
dannycanrock said:
hey guys i just want some help because am planin to flash ics roms so i need a stock gb rooted + cwm ? download link ?
my quss
1- can i flash that rooted gb with cwm on odin pc without gettin the yallow triangle if there's not rooted gb with cwm then please provide me a link of gb rooted so i can use mobile odin to flash Abyss kernel 4.2
2- when i decide to go back from ics rom i should flash Abyss kernel in recover then reboot recovery then how can i flash the stock gb rooted in recovery or should i have a custom gb rom for it to be zip so i can flash it in recovery or should i just flash rooted stock gb with odin pc directly from ics rom ?
i know that i can do wiping things and factory data on ics and pleaes correct me if i said anything that would brick my phone thaank you so much you all for any help
am just worried i don't wanna brick my lovely Note
Click to expand...
Click to collapse
Wht i understand is you want to flash a custom ICS rom on your note.
First of all..
Get root.
http://forum.xda-developers.com/showthread.php?t=1329360
Stick with the instructions.
After doing this you will have root+cwm installed on your lovely note.
Now download Abyss 4.2 from here.
http://forum.xda-developers.com/showthread.php?t=1362424
Now download custom ics rom from android development section and put it in your phone sd card or external card.
Reboot into recovery.
Flash abyss 4.2
Go to advanced and reboot recovery.
Now you have abyss redpill recovery or touch cwm.
Do all 3 wipes. Cache, Dalvik and data.
Flash rom
Reboot system
Sent from my GT-N7000 using XDA Premium App
Criskelo ICS v9 trouble
Hi,
I installed criskelo v9 on my phone just now..and titanium backup doesnt work..it says i do not have root permissions
now all my apps are on it and the phone is pretty pointless without it..
I tried installing abyssnote and franco kernel just to see if it works but the update gets stuck at "installing packages" and then reboots to system to the earlier settings..
the cwm i have right now is also not the touch version and my kernel is cf-root so i do not know if i should be reflashing criskelo directly on this to check for any difference..
PLease tell me what i need to do..I am lost and could not find anything after an hour of googling
shubhm_22 said:
Hi,
I installed criskelo v9 on my phone just now..and titanium backup doesnt work..it says i do not have root permissions
now all my apps are on it and the phone is pretty pointless without it..
I tried installing abyssnote and franco kernel just to see if it works but the update gets stuck at "installing packages" and then reboots to system to the earlier settings..
the cwm i have right now is also not the touch version and my kernel is cf-root so i do not know if i should be reflashing criskelo directly on this to check for any difference..
PLease tell me what i need to do..I am lost and could not find anything after an hour of googling
Click to expand...
Click to collapse
You need to get root first.. Follow this.
http://forum.xda-developers.com/showthread.php?t=1329360
Then check root permissions with root explorer. Don't try to flash kernels and wipes without the instructions as this will brick your device. Just stay calm and post here. I ll try to help ya as i could.
Sent from my GT-N7000 using XDA Premium App
Still not working!!
sahilarora2003 said:
You need to get root first.. Follow this.
http://forum.xda-developers.com/showthread.php?t=1329360
Then check root permissions with root explorer. Don't try to flash kernels and wipes without the instructions as this will brick your device. Just stay calm and post here. I ll try to help ya as i could.
Sent from my GT-N7000 using XDA Premium App
Click to expand...
Click to collapse
I followed the instructions to the T.. Root permissions didnt happen..Here's what i did..
1. Downloaded CWM and busybox and placed them where he said
2. Booted into recovery and installed CWM
After this the UI didnt change to the touch UI as he indicated but was still the button UI
3. ANyway went ahead and installed busybox from the zip
Here the progress was stuck at "unmounting system" till the phone reboot itself to the system..And i still dont have root permissions as per titanium..
Where did i go wrong?
shubhm_22 said:
I followed the instructions to the T.. Root permissions didnt happen..Here's what i did..
1. Downloaded CWM and busybox and placed them where he said
2. Booted into recovery and installed CWM
After this the UI didnt change to the touch UI as he indicated but was still the button UI
3. ANyway went ahead and installed busybox from the zip
Here the progress was stuck at "unmounting system" till the phone reboot itself to the system..And i still dont have root permissions as per titanium..
Where did i go wrong?
Click to expand...
Click to collapse
if u want to use gb version just to flash roms u can go ahead and install this stock gb rooted + cwm from dr.ketan i tried workin very well
http://d-h.st/HJM
dannycanrock said:
if u want to use gb version just to flash roms u can go ahead and install this stock gb rooted + cwm from dr.ketan i tried workin very well
http://d-h.st/HJM
Click to expand...
Click to collapse
Hi, what i really want is root permission so i can use criskelo as my ROM..I was using gb (checkrom v6 with abyss) till now and thought of upgrading to ICS...if i get root permissions i can restore my apps using titanium and my problem wil be solved..titanium is currently saying i dont have root permissions and not restoring my apps...
Of course i will want to change kernels too to mix and match my requirements with battery life later on...
If your desire is to just get rooted, then download the Abysskernel touch zip file* : http://downloadandroidrom.com/file/...rnel/AbyssNotekernel42CWTouchOriginalLogo.zip
Saved it in your external SD card and install it using Recovery Mode
After that, your phone should restart and check after if you have SU(Superuser) and CWM installed. If you do have it.. Rest assured your phone is already rooted.
*courtesy of RootGalaxyNote website
letters_to_cleo said:
If your desire is to just get rooted, then download the Abysskernel touch zip file* : http://downloadandroidrom.com/file/...rnel/AbyssNotekernel42CWTouchOriginalLogo.zip
Saved it in your external SD card and install it using Recovery Mode
After that, your phone should restart and check after if you have SU(Superuser) and CWM installed. If you do have it.. Rest assured your phone is already rooted.
*courtesy of RootGalaxyNote website
Click to expand...
Click to collapse
Thats where the problem is..i have tried installing that file multiple times..it gets stuck at "installing update" and reboots into the system..
Within the phone i already have CWM (as the app) in my phone but it says it cannot work coz i need cf-root v5 or newer for it to work...can i use the LRG file as given in this forum to change the kernel?
http://forum.xda-developers.com/showthread.php?t=1329360
file name : CF-Root-SGN_XX_DBT_LRG-v5.6-CWM5 (i had chosen the LRG modem while installing criskelo v9)
Are there different kernels for ICS and GB and maybe im trying the wrong file?
Also right now all i want is the root..but i also wanna be able to rollback to gb later and try other roms as per my convenience if i dont like criskelo..so any guidance keeping that in mind for the future will b much appreciated
Thanks..
shubhm_22 said:
Thats where the problem is..i have tried installing that file multiple times..it gets stuck at "installing update" and reboots into the system..
Within the phone i already have CWM (as the app) in my phone but it says it cannot work coz i need cf-root v5 or newer for it to work...can i use the LRG file as given in this forum to change the kernel?
http://forum.xda-developers.com/showthread.php?t=1329360
file name : CF-Root-SGN_XX_DBT_LRG-v5.6-CWM5 (i had chosen the LRG modem while installing criskelo v9)
Are there different kernels for ICS and GB and maybe im trying the wrong file?
Also right now all i want is the root..but i also wanna be able to rollback to gb later and try other roms as per my convenience if i dont like criskelo..so any guidance keeping that in mind for the future will b much appreciated
Thanks..
Click to expand...
Click to collapse
What is your current ROM now? stock DXLRG? if it is, yes you can flash that kernel on your link (using mobile odin pro). Try to check back after thru CWM if it still gives you the same message or not.
Yes, there are different kernels solely for ICS only and also solely for GB alone. Don't make a mistake in mixing a GB kernel to your ICS Rom or else your phone gets fried.
letters_to_cleo said:
What is your current ROM now? stock DXLRG? if it is, yes you can flash that kernel on your link (using mobile odin pro). Try to check back after thru CWM if it still gives you the same message or not.
Yes, there are different kernels solely for ICS only and also solely for GB alone. Don't make a mistake in mixing a GB kernel to your ICS Rom or else your phone gets fried.
Click to expand...
Click to collapse
I am right now on Criskelo ICS v9..
The exact problem on my phone (id mentioned earlier too) is that its like its semi-rooted..things like cpuspy etc work..but titanium backup and moble odin dont..my main motive is to have titanium working so i can use the phone normally..
Now i see that criskelo has just launched v10.1 of the same ROM which has solved the semiroot+wifi issue..download is in progress and It wud be great to know how i can move on to that now..
Abyssnote kernel is not installing (stuck at "installing update" ) and as per my knowledge the phone isnt rooted (coz titanium backup and mobile odin dont work)..
Can i rollback to prerooted gb (i have this file: Rooted_Stock_Odex_N7000DDLB2 - nonwipe gb ROM) via PC odin to initiate the whole process again under present circumstances?
Whole process here meaning *prerooted gb+abyssnote kernel+criskelo v10.1 install*..
PS - i did all wipes while installing the present ROM (if it matters)..
Yes, you have what we call it here as a semi rooted phone. Not getting all the permissions to access system files inside. It's a good thing though that Criskelo has a new version to his ROM and that should be appropriate in installing it.
Can you rollback to pre rooted GB? Yes you can. Just pick the appropriate GB ROM. And oh by the way bud, stay clear on fully wiping your phone... Remember your walking in a thin line here when your flashing Custom ICS ROMs...
Just a heads up, that's all.
Cheers!
letters_to_cleo said:
Yes, you have what we call it here as a semi rooted phone. Not getting all the permissions to access system files inside. It's a good thing though that Criskelo has a new version to his ROM and that should be appropriate in installing it.
Can you rollback to pre rooted GB? Yes you can. Just pick the appropriate GB ROM. And oh by the way bud, stay clear on fully wiping your phone... Remember your walking in a thin line here when your flashing Custom ICS ROMs...
Just a heads up, that's all.
Cheers!
Click to expand...
Click to collapse
thanks a lot for the quick response
just a final query..i dont have abyssnote on my phone now..i have whatever criskelo v9 gave me by default (i chose cf-root during install) and im semi-rooted..
Under these conditions can i go ahead with installing the prerooted gb ROM that i mentioned?
and about the heads-up (sorry im still new to flashing ) do u mean i shudnt be wiping everything when i do the flash to the prerooted gb now? (the ROM i have is a no-wipe ROM as i said earlier)
Thanks again
shubhm_22 said:
thanks a lot for the quick response
just a final query..i dont have abyssnote on my phone now..i have whatever criskelo v9 gave me by default (i chose cf-root during install) and im semi-rooted..
Under these conditions can i go ahead with installing the prerooted gb ROM that i mentioned?
and about the heads-up (sorry im still new to flashing ) do u mean i shudnt be wiping everything when i do the flash to the prerooted gb now? (the ROM i have is a no-wipe ROM as i said earlier)
Thanks again
Click to expand...
Click to collapse
first, let's tackle your second question. If your on Criskelo ICS now, please under NO circumstances, YOU DO NOT FULLY WIPE your phone before going back to the pre rooted GB. There's a bug circulating around the forum and it's called the SUPER BRICK BUG. It'll fry your emMC chip (on your phone) thereby making it as a dead paper bag. There are countless of folks here already that have succumbed to the bug. Most have returned their dead phone back to Samsung Repair for an exchange on the motherboard. That is how deadly this bug can sting your phone.
So stay away from it. (It's better late than never, mind you)
on your first question,
Use PC Odin to downgrade to a pre rooted GB one. That's it.
Cheers!
letters_to_cleo said:
first, let's tackle your second question. If your on Criskelo ICS now, please under NO circumstances, YOU DO NOT FULLY WIPE your phone before going back to the pre rooted GB. There's a bug circulating around the forum and it's called the SUPER BRICK BUG. It'll fry your emMC chip (on your phone) thereby making it as a dead paper bag. There are countless of folks here already that have succumbed to the bug. Most have returned their dead phone back to Samsung Repair for an exchange on the motherboard. That is how deadly this bug can sting your phone.
So stay away from it. (It's better late than never, mind you)
on your first question,
Use PC Odin to downgrade to a pre rooted GB one. That's it.
Cheers!
Click to expand...
Click to collapse
whoaa!! thank god i didnt do that!!!
as a beginner, im gonna take it as a thumb rule then to use PC odin whenever i have to change ROM from any custom ICS to any other ROM and stay away from recovery mode..once im on prerooted gb thru PC odin i can do what i desire...that shud keep me safe i guess
Thanks for saving me a year of groceries
shubhm_22 said:
whoaa!! thank god i didnt do that!!!
as a beginner, im gonna take it as a thumb rule then to use PC odin whenever i have to change ROM from any custom ICS to any other ROM and stay away from recovery mode..once im on prerooted gb thru PC odin i can do what i desire...that shud keep me safe i guess
Thanks for saving me a year of groceries
Click to expand...
Click to collapse
hehehe no problemo bud.. that's should be your rule of thumb from now on.
P.S.
don't forget to hit my 'Thank' button if I've helped you in one way or the other. Cheers! :good:
Did you get rooted installing busybox su? I think you have partial root.
Install busybox from playstore and open it. Press install button. It should be fine.
Sent from my GT-N7000 using XDA Premium App
to check if you are fully rooted copy and paste in root / system...install busybox that helped me on ics roms then once your fully rooted flash a safe kernel ..dafuq , speedmod etc then flash new rom . dont do any wiping til on a safe kernel and read instructions fully
@All
Thanks for the your responses
This is what i did after getting some doubts cleared over here:
I rolled back to a prerooted ODEX gb ROM..and installed rocketrom for now..gonna use it for a while and check how people are finding criskelo v10.1..Once im satisfied with that gonna go ahead with flashing it..
Thanks again :good:

Problem wit galaxy note after change of the DPI

Hi All,
Hope I am in the good place to present my problem (i'm new in the forum and I'm just learning the "how to").
Yesterday I've rooted my Gnote (GTN7000 XXLPT - ICS just installed from OTA update). It was the paradise before i decide to instal "DPI change" ...
I set the DPI from 160 to 240 and then save + reboot ... Till that moment, my GNote stuck on the launching logo (Samsung Galaxy Note N7000).
I'm not an expert of Android (the proof ...) and I'm looking for the safest and easiest (step by step) solution to revive my GNote.
I know that XDA is an expert forum and therefore I please every of you that will see my request to help me ...
Ps: A part from the root I have applied no other manipulation on the phone (even the setup of the debuger mode).
Your kind help with this will be saving for me, given that there is no repair / after sale service available in my country.
Flash a safe kernel (speedmod),enter recovery and wipe data.
tibosee said:
Flash a safe kernel (speedmod),enter recovery and wipe data.
Click to expand...
Click to collapse
Thank you for your reply Tibosee,
However, I wonder how I can flash the kernel (a little step by step tutorial will be welcome).
Please help with this.
Regards.
I´d recommend flashing this kernel (HydraCore) http://forum.xda-developers.com/showthread.php?t=1749863
Kernel Installation
Install either through CWM or PC/Mobile ODIN in the usual manner. Wiping Cache and Dalvik Cache is unnecessary and wont make any difference. Flash only with 25% or more charge on the phone
Click to expand...
Click to collapse
If you had searched you would have known that you shouldn't use the app to change the DPI. Once you have reflashed a ROM or installed a new kernel, then use Rom Toolbox instead or edit the build.prop manually to change the DPI.
evilspyre said:
If you had searched you would have known that you shouldn't use the app to change the DPI. Once you have reflashed a ROM or installed a new kernel, then use Rom Toolbox instead or edit the build.prop manually to change the DPI.
Click to expand...
Click to collapse
Don't be to hard on him its not stupid to think that an app on market will work as advertised
Sent from my GT-N7000 using xda premium
Dont use apps to change dpi.. it wont work mostly.. i had the same problem on my note.. change it manually via your build prop..
Sent from my GT-I9300 using Tapatalk 2
Chillz88 said:
Dont use apps to change dpi.. it wont work mostly.. i had the same problem on my note.. change it manually via your build prop..
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
Rom toolbox works if you don't want to mess with build prop but evilspyre already mentioned that
Sent from my GT-N7000 using xda premium
Rivan_92 said:
I´d recommend flashing this kernel (HydraCore) http://forum.xda-developers.com/showthread.php?t=1749863
Click to expand...
Click to collapse
Dears,
Thanks a lot for all assistance with this. Google play will never lies me as long as XDA will be there !
From your various explanations I've drawn the process below (please confirm that my comprehension is correct):
1 - Download and install Mobile Odin (Please provide a link to the safest version); Dont know if Odin will see the phone since i've not activated the debuger mode when the phone parameters was accessible.
2 - Download and install Hydracore Kernel;
3 - Connect the phone on the PC and run Odin (at this step I am not sure to know what to do);
4 - Flash and enjoy (Hope I'll reach this step)
May be the procedure with CWM will be more practicable, especially in case Odin do not see the phone ... But I really not know how to handle it. That's the reason why I was asking a Step by Step assistance.
Thanks and Regards
PatrickNkamgnia said:
Dears,
Thanks a lot for all assistance with this. Google play will never lies me as long as XDA will be there !
From your various explanations I've drawn the process below (please confirm that my comprehension is correct):
1 - Download and install Mobile Odin (Please provide a link to the safest version); Dont know if Odin will see the phone since i've not activated the debuger mode when the phone parameters was accessible.
2 - Download and install Hydracore Kernel;
3 - Connect the phone on the PC and run Odin (at this step I am not sure to know what to do);
4 - Flash and enjoy (Hope I'll reach this step)
May be the procedure with CWM will be more practicable, especially in case Odin do not see the phone ... But I really not know how to handle it. That's the reason why I was asking a Step by Step assistance.
Thanks and Regards
Click to expand...
Click to collapse
You only use one of the two applications; Mobile Odin or PC Odin. You don't have to use them together. Since your phone doesn't boot, then I assume Mobile Odin is out of the question. I'm gonna write a quick guide to use PC Odin.
1- Download PC Odin from this link: http://ul.to/xt4607xx (you can search the forum, you will find many download links for Odin 1.85)
EDIT: Here's another link, the 1st one doesn't want to work anymore. http://k0nane.info/rom/odin-185.zip You can google "odin 1.85" and open the first link (it should be an xda forums attachment)
2- Download the standard tar file of the Hydracore 3.5 kernel from this thread: http://forum.xda-developers.com/showthread.php?t=1749863
3- Open PC Odin and click on PDA and choose your kernel tar file downloaded from step 2.
4- Remove all check marks and leave only Auto Reboot and F. Reset Time CHECKED.
5- Turn your phone off and remove the battery and reinsert it.
6- Turn your phone on by pressing and holding the Power button + Menu button + Volume Down button (to get into Download mode).
7- Connect the phone to the USB cable and connect it to the computer. Odin should show a yellow box.
8- Press Start in PC Odin. The yellow box will turn green which means a successful flash.
9- Now you can wipe data safely (never wipe data using stock ICS kernel btw).
How is flashing the kernel going to solve the problem of a b0rked build.prop? Get out of here people.
The only solution to his problem is to flash a custom Rom.
" 9- Now you can wipe data safely (never wipe data using stock ICS kernel btw). :)" [/QUOTE said:
Joey_oggie, thanks a lot for your step by step tutorial, it is realy clear now. I'll try it and revert to tou with the status of the phone.
Just a quick one, regardind the end of your post, you mentioned that I should not wipe a stock rom. My understanding is that stock rom = official samsung rom. Therefore it seems my rom was a stock one (GTN7000 XXLPT - rom updated from GB to ICS - OTA update), since I never change it.
Should I wathever do the wipe as mentioned in your post?
Click to expand...
Click to collapse
chasmodo said:
How is flashing the kernel going to solve the problem of a b0rked build.prop? Get out of here people.
The only solution to his problem is to flash a custom Rom.
Click to expand...
Click to collapse
Hi Chasmodo,
I was just about to flash the Kernel of my GNote following Joey's + others advices above.
Please why do you think flashing the Kernel is not advisable? ... Do you think the phone will thereafter completely brick?
Please answer these two questions as quick as you can ... My finger is on the "red bouton" just waiting for you.
Could you also provide a link to a step by step tutorial in case the solution proposed by Joey is safe but comes unsuccessful ?
Thank you for your contribution.
Regards.
If your build.prop is corrupted/broken, flashing a new kernel won't fix it because it won't replace your build.prop.
As Chas said, the easiest fix would be to flash a custom ROM, as this will replace your build.prop.
Regards,
Dave
Sent from my GT-N7000 using Tapatalk 2
chasmodo said:
How is flashing the kernel going to solve the problem of a b0rked build.prop? Get out of here people.
The only solution to his problem is to flash a custom Rom.
Click to expand...
Click to collapse
Well, to flash a new ROM, he needs to be on a safe kernel...
And anyway, I thought wiping data = factory reset. Isn't that right? If so, then wouldn't the wipe fix his problem? I'm new to this stuff so excuse me if that's completely wrong.
PatrickNkamgnia said:
Joey_oggie, thanks a lot for your step by step tutorial, it is realy clear now. I'll try it and revert to tou with the status of the phone.
Just a quick one, regardind the end of your post, you mentioned that I should not wipe a stock rom. My understanding is that stock rom = official samsung rom. Therefore it seems my rom was a stock one (GTN7000 XXLPT - rom updated from GB to ICS - OTA update), since I never change it.
Should I wathever do the wipe as mentioned in your post?
Click to expand...
Click to collapse
Well, from what I read, most (if not all) Samsung stock ICS kernels have a bug which would corrupt the data partition when you wipe on any of them. The problem would appear when you wipe ON them, and not wipe them.
PatrickNkamgnia said:
Hi Chasmodo,
I was just about to flash the Kernel of my GNote following Joey's + others advices above.
Please why do you think flashing the Kernel is not advisable? ... Do you think the phone will thereafter completely brick?
Please answer these two questions as quick as you can ... My finger is on the "red bouton" just waiting for you.
Could you also provide a link to a step by step tutorial in case the solution proposed by Joey is safe but comes unsuccessful ?
Thank you for your contribution.
Regards.
Click to expand...
Click to collapse
I would wait till he replies to be on the safe side. In the meantime, try to burn some time and read some of the threads in the Note's android development section.
Sent from my GT-N7000 using xda app-developers app
Also flashing the stock Samsung ROM would also solve the problem as it would replace the wrongly edited build.prop with the stock build.prop.
Assuming you have the stock ROM downloaded on your PC, flash it using PC ODIN as explained in an earlier post.
Everything downloading, installing and rooting the stock ROMs is explained here by Dr Ketan
Once that is done, you can root your stock ROM and install mobile odin. You can then flash any custom kernel which is safe and has the brick bug covered. Factory wipe using a safe custom kernel wont brick your phone then.
I am not sure if flashing a safe custom kernel and doing a factory reset would replace the faulty build.prop file with a stock one directly. Chasmodo could explain more....
Flashing a stock ROM would surely replace everything with stock. So you have a clean stock state from which you can play around (rooting, custom kernels/ROMS, etc)
joey_oggie said:
And anyway, I thought wiping data = factory reset. Isn't that right? If so, then wouldn't the wipe fix his problem? I'm new to this stuff so excuse me if that's completely wrong.
Click to expand...
Click to collapse
Wiping /data won't touch /system where build.prop is
Sent from my GT-N7000 using xda premium
---------- Post added at 09:04 AM ---------- Previous post was at 08:55 AM ----------
PatrickNkamgnia said:
Hi Chasmodo,
I was just about to flash the Kernel of my GNote following Joey's + others advices above.
Please why do you think flashing the Kernel is not advisable? ... Do you think the phone will thereafter completely brick?
Please answer these two questions as quick as you can ... My finger is on the "red bouton" just waiting for you.
Could you also provide a link to a step by step tutorial in case the solution proposed by Joey is safe but comes unsuccessful ?
Thank you for your contribution.
Regards.
Click to expand...
Click to collapse
Xda is full of instructions on how to use odin search it. Flashing a kernel won't fix your problem. Best to do as previously advised and flash a new rom, stock or custom either will do
AND DON'T PANIC take it slow and don't do anything before you understand the process your phone is currently in no danger what so ever but a faulty flash can definitely brick it
Sent from my GT-N7000 using xda premium
apurvapatel said:
Also flashing the stock Samsung ROM would also solve the problem as it would replace the wrongly edited build.prop with the stock build.prop.
Assuming you have the stock ROM downloaded on your PC, flash it using PC ODIN as explained in an earlier post.
Everything downloading, installing and rooting the stock ROMs is explained here by Dr Ketan
Once that is done, you can root your stock ROM and install mobile odin. You can then flash any custom kernel which is safe and has the brick bug covered. Factory wipe using a safe custom kernel wont brick your phone then.
I am not sure if flashing a safe custom kernel and doing a factory reset would replace the faulty build.prop file with a stock one directly. Chasmodo could explain more....
Flashing a stock ROM would surely replace everything with stock. So you have a clean stock state from which you can play around (rooting, custom kernels/ROMS, etc)
Click to expand...
Click to collapse
Thank you all,
Really hope that this issue will help all GNote users when solved. Sure we are approaching the solution ...
I read in Dr Ketan tutorial the following:
Don't wipe anything from stock ICS recovery
Don't factory reset/Hard reset on stock ICS.
Don't flash any Wipe version of ICS ROM
Yesterday, after my GNote freezed on the "Samsung Galaxy Note N7000" image I tried to hard reset by wiping user data via ICS recovery (just after rooting the phone with CWM.
Does it means that my GNote is now bricked?
If it is the case shoud I anyway continue to follow Dr. Ketan tutorial to flash my GNote with a stock rom?
Regards.
PatrickNkamgnia said:
Yesterday, after my GNote freezed on the "Samsung Galaxy Note N7000" image I tried to hard reset by wiping user data via ICS recovery (just after rooting the phone with CWM.
Does it means that my GNote is now bricked?
If it is the case shoud I anyway continue to follow Dr. Ketan tutorial to flash my GNote with a stock rom?
Regards.
Click to expand...
Click to collapse
Very sorry to say buddy, your Note most likely is bricked. I hope I am wrong.
Try installing a stock ROM, preferrably Ginger Bread ROM via PC ODIN. If it fails, most likely, at FactoryFS write, then your phone is surely bricked.
Let us know how it goes, we can guide you further accordingly.
PatrickNkamgnia said:
Thank you all,
Really hope that this issue will help all GNote users when solved. Sure we are approaching the solution ...
I read in Dr Ketan tutorial the following:
Don't wipe anything from stock ICS recovery
Don't factory reset/Hard reset on stock ICS.
Don't flash any Wipe version of ICS ROM
Yesterday, after my GNote freezed on the "Samsung Galaxy Note N7000" image I tried to hard reset by wiping user data via ICS recovery (just after rooting the phone with CWM.
Does it means that my GNote is now bricked?
If it is the case shoud I anyway continue to follow Dr. Ketan tutorial to flash my GNote with a stock rom?
Regards.
Click to expand...
Click to collapse
see if you can still go to download mode and reflash a stock GB on your device. If it's successful then your good to go... if not, then look for the thread here to revive a brick phone.. note down the errors your getting (if there are any errors at all) when your going to reflash it again.

[Q] camera not working galaxy note

Yes I know I am a NOOB at 46 but I still can't resist messin with **** that isn't broken. Loved the NOOB video.
The probem is I think I flashed a dodgey ROM app and got scared half way through and tried to reset the phone to factory.
This is my Galaxy Note GT n7000. I have done a factory reset 3 times and believe I am well on my way to bricking my phone if I do this again.
All is good so far except the CAMERA.
I have downloaded the necessary HOTFILE STOCK ROM for NZ from your site but am now scared ****less to flash it.
Should I just give it back to the manufacturer and say DUH I DONT KNOW WHAT HAPPENED and let them fix it
I also have GINGER BREAD 2.3.6 ROM Should I just flash this and hope for a fix
I also have ICS 4.0.4 XXLRG Should I Flash this after 2.3.6
Just need a little help and direction, as this is all quite new to me. Yes I'm sure this has all been done before and as I yell at my kids for doin stupid **** you deserve the same latitude.
Cheers ****
flash gb first.. after flashing the gb do a factory reset and then check your camera if it's working or not.. if you got lucky and got it working then flash a ics otherwise take it to manufacturer for repair.. don't mess up when you don't know what you are doing
Ps: if everything goes well and you flashed a ics rom then please flash a modified stock kernel http://forum.xda-developers.com/showthread.php?t=1901191
Sent from my GT-N7000 using Tapatalk 2
you can go ahead and flash ICS 4.0.4 but donot do a factory reset on stock recovery/kernel..
Camera
abhinav quietly brilliant said:
flash gb first.. after flashing the gb do a factory reset and then check your camera if it's working or not.. if you got lucky and got it working then flash a ics otherwise take it to manufacturer for repair.. don't mess up when you don't know what you are doing
Ps: if everything goes well and you flashed a ics rom then please flash a modified stock kernel http://forum.xda-developers.com/showthread.php?t=1901191
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
Thanks for your reply, but if you look at the other reply it says to flash ics and NOT to do a FACTORY reset and you say to do the factory reset what is the risk of doing the factory reset
Not to sure which version of PHILZ modified Kernel to use Can you help with this
If you choose GB, it's safe. But ICS kernels have a bug which can brick the phone if a factory wipe is made. What abhinav said was to do a wipe in GB. Which is safe. What I told you was you can directly install the ICS rom but refrain from wiping till you install a safe kernel.
Go to OAD forum of note and you will see Philz thread. Download any ICS kernel like DDLRB and place on external SD. Then boot in to recovery and choose "apply update from external storage". Choose the zip file you downloaded. Once done boot into recovery again. Yubwill have Cwm. Now you have a safe kernel. You can do a factory wipe.
nokiamodeln91 said:
If you choose GB, it's safe. But ICS kernels have a bug which can brick the phone if a factory wipe is made. What abhinav said was to do a wipe in GB. Which is safe. What I told you was you can directly install the ICS rom but refrain from wiping till you install a safe kernel.
Go to OAD forum of note and you will see Philz thread. Download any ICS kernel like DDLRB and place on external SD. Then boot in to recovery and choose "apply update from external storage". Choose the zip file you downloaded. Once done boot into recovery again. Yubwill have Cwm. Now you have a safe kernel. You can do a factory wipe.
Click to expand...
Click to collapse
Thank you for your help. I have fixed the camera with the GB update and went on to update ICS XXLRG, but this still isnt CwM.
Im not sure which Cwm to use There is an XXLSC-XJB which is close. Should I use this one or does it matter
. PhilZ files were unavailable for download as well is there another place to get this file and what is the easiest method to install
Choose as per your rom build number.
nokiamodeln91 said:
Choose as per your rom build number.
Click to expand...
Click to collapse
My wuild number after flashing ICS is IMM76D.XXLRG but nothing is the same the clsing osest on Philz is XXLSC XJB
Could I flash this using ODIN from my laptop?
Thanks
PS where is the thank you button for my responses I like to say thanks but cant seem to find where
You have an ICS rom. You can use any ICS kernel by Philz. Use xxlrt or ddlrb
Flashing via odin will increase the counter and yellow triangle at boot. Best is to flash via recovery. Place the zip version of the kernel on ext sd card and boot into recovery
nokiamodeln91 said:
You have an ICS rom. You can use any ICS kernel by Philz. Use xxlrt or ddlrb
Flashing via odin will increase the counter and yellow triangle at boot. Best is to flash via recovery. Place the zip version of the kernel on ext sd card and boot into recovery
Click to expand...
Click to collapse
Thanks again
I used modified ICS kernel PhilZ cwm6 XXLRG DBT 3.99 signed zip version but when I boot from SD it stops and says that it can't verify the signature and wont install
Do I need and unzip app? If I install this update will I have root access to run apps like Titanium Backup?
Or should I use the tar file in ODIN?
I do appreciate all your time and effort
What option did you select in recovery?
This is what you need to follow
1. Download the signed zip version of the kernel and place in external sd.
2. Boot into recovery and choose "apply update from external storage".
3. Choose the file you downloaded.
4. It will do the magic.
This will give you root access and yes apps like TB can be used. Also you will get CWM and it's a safe kernel too.
Dude he has done everything correct i know.. The v.3.99 of ics kernels are not built correctly when you flash them in stock ics recovery they always give a verification failed error.. But the older versions are ok to be flashed in stock ics recovery
Sent from my GT-N7000 using Tapatalk 2
I just flashed the ddlrb 3.99 and worked just fine. Where did you get this info?
Use the tar method only if u are confident enough
And yes you will be able to run applications like titanium backup
And for the flash counter just use triangle away
Search Google for it
All is well that ends well
nokiamodeln91 said:
I just flashed the ddlrb 3.99 and worked just fine. Where did you get this info?
Click to expand...
Click to collapse
Read some comments on the thread and i too have faced that.. But i guess philz has corrected his kernels they are installing now..
Sent from my GT-N7000 using Tapatalk 2

Categories

Resources