Kies not reading my device - Galaxy Tab Q&A, Help & Troubleshooting

So I'm finally decides to root my tab but kies wont read my device... Kies 2.0 and tmobile samsung galaxy tab..on 2.2 froyo. Any ideas?
Sent from my SGH-T849 using Tapatalk

Flipnfr3ak said:
So I'm finally decides to root my tab but kies wont read my device... Kies 2.0 and tmobile samsung galaxy tab..on 2.2 froyo. Any ideas?
Sent from my SGH-T849 using Tapatalk
Click to expand...
Click to collapse
cause samsung doesn't want their devices to be rooted

You can flash it via odin. There is a good thread, if i remember right, here in the dev section: How to (un)root my tap!
Or you follow the guide to upgrade to gingerbread or overcome.
Hope this helps a bit further
Regards Rod

you sure [USB debugging] is unchecked ?
setting > application > development > uncheck usb
my tab rooted and worked fine with kies on stock rom and overcome too , so not root is problem as i know

Related

New firmware received via KIES

Yesterday I received a new firmware for my Swisscom 3G Galaxy Tab when i launched Kies.
First it asked me to update Kies, then after system reboot, it suddenly asked my if i'ld like to update to the new firmware. Anxious of getting Gingerbread, I chosen yes.
Guess what ...
No Gingerbread but Froyo 2.2.1
GT-P1000
Baseband: P1000XXJMI
Kernel: 2.6.32.9
Build: Froyo XWJMJ
Kies did not give me any further updates after this.
So, still, no GB
Cheers
Martin
Gingerbread has started rolling out and you can now update to it via Odin.
| Don't Revive Me Bro! |
Oh my God. I taught it was gingerbread already...
Sent via Galaxy Tab
I need GINGERBREAD!!
FabioMC said:
I need GINGERBREAD!!
Click to expand...
Click to collapse
Did you read the 1st reply to the OP?!
is there a way not to do a full wipe when installing gingerbread?
I heard that firmware 2.2.1 must be installed before gingerbread can be deployed. So it is probably good that you installed it.
Now if you really want gingerbread today go to the developers section and install the Overcome rom. In its thread you'll find a great guide if followed the installation is very simple.
Sent from my GT-P1000 using XDA App
MartinMu said:
Yesterday I received a new firmware for my Swisscom 3G Galaxy Tab when i launched Kies.
First it asked me to update Kies, then after system reboot, it suddenly asked my if i'ld like to update to the new firmware. Anxious of getting Gingerbread, I chosen yes.
Guess what ...
No Gingerbread but Froyo 2.2.1
GT-P1000
Baseband: P1000XXJMI
Kernel: 2.6.32.9
Build: Froyo XWJMJ
Kies did not give me any further updates after this.
So, still, no GB
Cheers
Martin
Click to expand...
Click to collapse
Same here.
But on my Tab it still says Froyo 2.2, but the kernel is the same, as well the baseband and Build.
I was hoping for GB...

[Q] [newbie] Galaxy Tab Update Android 2.3.3

Hello,
i hve an Galaxy Tab GT-P1000 with Android 2.2.
Is there an update to android 2.3.3 availeble for my Galaxy Tab?
Thanks
Matthias
STF-DIR said:
Hello,
i hve an Galaxy Tab GT-P1000 with Android 2.2.
Is there an update to android 2.3.3 availeble for my Galaxy Tab?
Thanks
Matthias
Click to expand...
Click to collapse
Hi, You can check it using Kies software which can be download from samsung website.
http://www.samsung.com/uk/support/m...softwaremanual.do?page=MOBILE.SOFTWARE.MANUAL
Just download it, install on your PC, open kies program and connect your tab using USB cable. It will auto check if there is any update.
naimmkassim said:
Hi, You can check it using Kies software which can be download from samsung website.
http://www.samsung.com/uk/support/m...softwaremanual.do?page=MOBILE.SOFTWARE.MANUAL
Just download it, install on your PC, open kies program and connect your tab using USB cable. It will auto check if there is any update.
Click to expand...
Click to collapse
Hello,
thanks for your Answer.
But here in the Forum i have seeen some updates called Gingerbread****.2.3.3 for the Galaxy Tab.
I think this are Rom's self made from other users or ?
The question is if i can install it.
Kies have no updates at the moment.
Thanks
Matthias
STF-DIR said:
Hello,
thanks for your Answer.
But here in the Forum i have seeen some updates called Gingerbread****.2.3.3 for the Galaxy Tab.
I think this are Rom's self made from other users or ?
The question is if i can install it.
Kies have no updates at the moment.
Thanks
Matthias
Click to expand...
Click to collapse
Yes there is.
You can manually update it.
Just read below forum and you will understand how.
http://forum.xda-developers.com/showthread.php?t=1083971
If have any question, please ask the OP of that treat (deepx10).
tbh, i didnt try his step yet since my tab through my region already have update through kies.
Good luck.
Don't wait for update from kies. Just update in manually.
Hello,
i have installed the Update to Gingerbread 2.3.3 sussefully.
Works great !!!
Is there also an Update to Android 3 Honeycomb in German availeble?
Matthias
data?
would i lose my data/info/contacts if i were to update via kies?
i want to update my device with this stock rom available [stock rom][2.3.6][MULTI-LANG] P1000XWJQ8_P1000PHNJQ1_P1000XXJPZ ...in the android development forum..
my device is
PDA : P1000DDJM8
PHONE : P1000DDJM2
CSC : P1000DDJM1
m running stock froyo 2.2 ..my question is that can i update my phone with this above mentioned rom ..as in india only 2.3 is available via kies ..
and is the procedure same as mentioned in the forums via odin ..or do i need another method for update .and plz let me know about the pit file.is it necessary...
thnxx in advance
Have you tried already flashing a rom via odin?if yes try the same method.
Sent from my GT-P1000 using XDA Premium App
No honeycomb update will release for galaxy tab7.
Sent from my GT-P1000 using XDA Premium App

[Q] Stopped working after upgrade to Gingerbread.

Hi.
We have two galaxy tabs and was upgrading to ginger bread. One of them was succsesful, but the other one dosen't start anymore.
Donno what's wrong with it?
How can I get it working again?
Thankful for any help. (Excouse my bad english.)
Regards Christian.
You can put it into download mode and flash it with odin. Google download mode galaxy tab. Then download the stock gingerbread firmware from samfirmware.com or xda download site. On youtube there are good tutorials how to flash galaxy tab firmwares. WARNING: you will VOID you WARRANTEE
Sent from my GT-I9100
Okey, thanks for a quick answer. Is there anyway of doing this and not void warrenty? Some recovery thing or something?
Well the download mode is the recovery and kies doesn't provide this as far as i know sry you could send it to samsung
Sent from my GT-I9100
But i am not sure if an official rom will void your warrantee. How did you update it?
Sent from my GT-I9100
flashing official firmware in no way would void any warranty.
You need to find the stock firmware (rom) for your Tab and then flash it via Kies or Heimdall depending on which tab you have, that should get you back up and running unless there's an actual hardware issue.
Thanks alot for your time.
There is no hardware error, this is software.
Can someone please explain in steps how to do this and where to get the firmware and roms or is there any good how-to to do this?
Official firmware is availiable on samfirmware.com registration is free. They also provide flashing tutorials. For any further problems ask me, i'll help
Sent from my GT-I9100
Thanks alot, i'll try.
I appreciate you keeping and eye on this post if i run into some heavy problem
Regards Christian.
Youre welcome
Sent from my GT-I9100
Try emergency firmware recovery in kies
Sent from my GT-P1000 using XDA Premium App
Okey, I changed pit file with odin and after that it works again. I'm in keis with the device connected and in there it says this deviceversion can not be updated.
I would like to be able to update it to gingerbread in keis.
I have to devices and they are both galaxy tab 7" gt-p1000 and one of them is updates, why can't i update this one?
I get this.
PDA:JJ7 Phone:JK5 CSC:JK2 (TPH)
So you have one on gingerbread and the other one is on 2.2, right?
Did you buy them both in the same store/ county?
What is modem etc on the gingerbread one?
Sent from my GT-I9100
The one that I was able to update to gingerbread with keis is bought a few weeks before the other one. Not in the same store but in the same country (Sweden, I live here.)
I don't have the other one at home right now. so I don't know modem (by the way, what is modem?)
Thanks in advance.
Hmm modem dont really know should ask google but i'm too lazy. Maybe these two devices are a bit more different than we think... I really have no idea why kies wont let you update it, sorry. I have no galaxy tab (but maybe in some months?) but you could download the 2.3.3 from samfirmware and flash it. The only problem would be that this firmware (marked red) is unofficial. Means that you might void the warrantee.
By the way 2.3.3 is only official on italian galaxy tabs
I personally live in Austria and bought a Galaxy S2 about a week ago. I think that if it would need a repair i could easily flash it to official 2.3.3 (i am 2.3.4 unofficially) and i dont really think about warrantees.
I am not sure if you would not void the warrantee with an unofficial but not rooted os.
But if you want i can help you to get on 2.3.3. It is your choise.
Official 2.2 or
Unofficial 2.3.3
GalaxyHacker
Sent from my GT-I9100
Christianfrank said:
The one that I was able to update to gingerbread with keis is bought a few weeks before the other one. Not in the same store but in the same country (Sweden, I live here.)
I don't have the other one at home right now. so I don't know modem (by the way, what is modem?)
Thanks in advance.
Click to expand...
Click to collapse
The modem is the baseband listed when you go to settings > about phone

Upgrade Galaxy Tab 7 GT-P1000 2.2 Froyo to higher version

Guys,
I need help on upgrading my Galaxy Tab 7 running 2.2 Froyo which I bought quite long time ago. I plan to upgrade it to 2.3 but difficult in finding the bootloader. Can I upgrade to higher version directly instead of upgrade it to 2.3?
Please advise! Thanks
Follow my signature to overcome link.
when you get the PDF, jump to page 7.
Forget about he rooting, the bootloader check, etc.
the rooting guide is just so that you can backup.
the boot loader is included. in GB stock safe v5
Edit: I didn't notice you post in development section.
You are not developing anything, you should never start a thread in dev section.
Sent from my GT-P1000 using xda app-developers app
fix
My GT-P1000 Froyo 2.2 defile all solution
I have registered in this forum to get solution to my problem please.
I have this GT-P1000 that I want to upgrade but has defiled all solution.
I have tried all the methods using z4root, DoomLord etc
but refused to get rooted.
Please what can I do more
Since I will still root the Tab when I use Overcomer
I feel I need to know how to root before I start Overcomer softwares
Are you also on froyo?
If so, then you need to root only to check if you have a locked bootloader.
Otherwise, you don't need to.
If you want to risk it, just flash GB. Many people don't have locked bootloader froyo. Just saying.
Sent from my GT-N7100 using XDA Free mobile app
I also had a P1000 on Froyo and yesterday I upgraded to GB using Kies only. I had root on the Froyo but since I didn't touch anything related to bootlocker and whatnot, I managed to upgrade via Kies.
A minor problem is that now I don't have the new Play Store, only the old market, I'm searching in order to find a solution.
Good luck
i want to upgrade my gt-p1000 on froyo but i dont know how can you pleas help me

[Q] Samsung Tab Update fail in Odin3_v1.7, Andriod 2.3.6

Hai
I am facing the problem is Android 2.3.3 is updated to android 2.3.6 with using Odin3_v1.7 suddenly tab camera flash light glowing and power off No display
disconnecting tab to PC and again try to connect tab Odin3_v1.7, tab is detected and flashing starts with android 2.3.3 rar file proses starts and finally update fail and tab turned off, No display and No function, download mode (or) recovery mode,Tab not power on?
again tab charging in 8 hours through Samsung charger, Tab charging time no battery icon displayed, Tab connecting with PC open Odin3_v1.7 and try to connecting (val down key + power) Tab are not connecting in PC
Pls tell me any processes to recovery my tab
Model No: GT-P1000, GSM Tab
Made in Korea by Samsung
Thank you for XDA-Developers
Maybe you flashed a ROM not made for P1000.
If your bootloader is replaced, you have a brick, unless someone know how to JTAG it for you.
Sent from my GT-P1000 using xda app-developers app
Thanks for replay priyana
priyana said:
Maybe you flashed a ROM not made for P1000.
If your bootloader is replaced, you have a brick, unless someone know how to JTAG it for you.
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
Hai
Thanks for replay priyana i am using update file Android 2.3.6 Gingerbread [XXJVU].rar\Android 2.3.6 Gingerbread [XXJVU] - RAR, CODE_I9000XXJVU_CL851880_REV03_user_low_ship.tar.md5 *
pls tell me how to solve the problem it is simple or difficult
Samsung Tab Update fail in Odin3_v1.7, Andriod 2.3.6
Pls tell me any one how to JTAG my Tab If recovery is possible
Samsung Tab Update fail in Odin3_v1.7, Andriod 2.3.6
Pls replay me any one how to JTAG my Tab, If recovery is possible :crying:
You flashed a Galaxy S phone ROM to your P1000 galaxy tab!
Hope someone can help you recover from that.
Sent from my GT-P1000 using xda app-developers app
Thanks for replay priyana
Thanks for replay priyana
Hooo No Actually First i am using update file Android 2.3.6 Gingerbread [XWJQ8].rar, It is flashing successful but tab keyboard is not working any key pressing tab display showed null null null because i am try with Android 2.3.6 Gingerbread [XXJVU].rar
If my tab recovery with old version it is possible simple other vise my tab send to any Samsung service center pls tell me
once again thanks for replay priyana
Thanks for replay priyana Pls tell me upgrade process
pls tell how much time gape between upgrade of OS versions 2.3.3 to 2.3.6 to 4.0 if successful installed
I9000 is Galaxy S.
If you can't get to download mode, you are quite bricked.
There is a unbrickable mod thread. It is a hardware mod.
You can try it.
BTW, no android 4.0 official from Samsung. 2.3.6 is the last.
Sent from my GT-P1000 using xda app-developers app
Thank u for replay priyana
I am seeing in you tube viotutorials are GT-P1000 upgrade with android 4.1.0 ? It is possible:confuersed:
Actual my doubt is if 2.2 Samsung tab, i can updated 2.3.3 android version is successfully update ok with in 10 min update with android 2.3.6 version is it possible or any complaints pls tell me

Categories

Resources