Related
http://www.tabbal.net/files/Dragon-Kernel-Voodoo-OC-v3.3-T1.zip
Dragon 3.2 w/ a fix that seems to work for setCPU screen off profiles setting the CPU to low values. Please note: The max freq in setCPU for that profile is what will be used, no scaling. I set it to 200Mhz and it's working fine every time I fire it back up.
The original patch is from here: https://review.source.android.com//#change,20804
Created by coolbho3k for the Nexus S, I backported it to Froyo. If we get good test reports from others, I'll push the changes to github tomorrow so other devs can use it.
When testing, please either use known good OC/UV settings, or don't OC/UV at all. Phantom OC/UV crashes won't help us know if this is working well for others. I've tested it with and without, turning my phone on/off like a madman... working fine so far.
Hmmm... early reports aren't looking good. Perhaps something isn't quite right. lol... Be warned if you try it, read all the comments. Might have to declare this one a fail. Too bad the NS cpu-freq driver is so different.. maybe I'll try pulling the whole thing over..
Downloading now report back tomorrow! This sounds promising.
Sent from my SGH-T959 using XDA App
Will test as soon as i get mine back to stock! Its just what I felt like doing today.
I did have a question..
Do we need to adjust it to say.. performance,on demand powersave? or will it just default?
just flashed it on my phone its been running warm hot even then after about 10 15mins of running it reboots
coolkid893 said:
just flashed it on my phone its been running warm hot even then after about 10 15mins of running it reboots
Click to expand...
Click to collapse
wow that can't be good. Sounds like the phone is overheating..
PaiPiePia said:
wow that can't be good. Sounds like the phone is overheating..
Click to expand...
Click to collapse
ya i know an its not even o/c its set to only max at 800mhz lol i think im gonna reflash to 3.2 to be safe but its a step in the right direction good try
Ok Im gunna have to try and install setcpu first.. otherwise my phone loads and restarts a few minutes into being on the desktop.
Testing now, Just UV'ed my clocks, and now setting profiles.
Observation so far:
SetCPU, and Uvolting seems to lock up my phone, and cause a reboot, and phone is pretty warm/hot.
Confirmed I can not run this either.
Couldn't use it. Phone would shut off as soon as scanning started. Kept happening everytime I tried to start phone :¬( going back to 3.2 has been stable at 1.4 ghz.
Sent from my SGH-T959 using XDA App
junxracr said:
Couldn't use it. Phone would shut off as soon as scanning started. Kept happening everytime I tried to start phone :¬( going back to 3.2 has been stable at 1.4 ghz.
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
Im having better luck using profiles with 3.2 than with this one. I've been using set cpu since 3.2 came out with no problems @1.4 and on powersave when screen is off. I have made no changes to the UV settings.
yikes ! i smell quadrant score in few min lemme install it
Has anyone got a "kernel panic" on this before? I'm not sure what I could have done wrong.. had to Odin back to stock. Forgot to back up before I flashed, shame on me. lol.
kernel panic wipes your data ? everytime kernel panicked on me i just restarted =D
bartek25 said:
kernel panic wipes your data ? everytime kernel panicked on me i just restarted =D
Click to expand...
Click to collapse
Nah, it didn't wipe my data. I had to Odin back to stock because I couldn't go into Clockwork Mod Recovery Mode. It would go into Kernel Panic and it reset all my launcher settings....
Was running hot for me also. Back to stock and then to bionix .
I think that when you get things fine tuned you will have a great Kernal.
Hi, im new to rooting but i have a question about music players and my rooted hero. I'm running aospCMod latest version with everything updated. My phone has only been rooted for a week but it just started happening yesterday.
The music player im using is called SongBird Beta, its a new player that might not run friendly with rooted devices but it was working till yesterday, and i've had to force close the app or pull my battery because my phone wouldn't respond. i WOULD post this in the aosp thread but i dont have enough posts lol..
is it just the app or is it my rooted phone?
I'm also running aospCMod and alot of times the devs will tell you to raise the minimum cpu setting from 176 to 264 or 352 and try it. It usually fixes the problem. Check under settings -> cm settings -> performance.
Sent from my HTC Hero CDMA using XDA App
I am also having those troubles. (older version, newer version)Pandora, Music Player and Double twist. Through Bluetooth, head phones and speaker. Skip, Freeze you name it. I have tried raising/lowering the settings and that has netted me the same result. Performance, Interactive, Ondemand, Userspace.... Tried it. Jit on and off... tried it. Flash, reflash, format, reflash... tried it. I am going to go through my notes today and try to flash a sense rom and do the media card scan fix to see if that works. IDK... Could be just the end of the Hero's life for me.
wild1z said:
I am also having those troubles. (older version, newer version)Pandora, Music Player and Double twist. Through Bluetooth, head phones and speaker. Skip, Freeze you name it. I have tried raising/lowering the settings and that has netted me the same result. Performance, Interactive, Ondemand, Userspace.... Tried it. Jit on and off... tried it. Flash, reflash, format, reflash... tried it. I am going to go through my notes today and try to flash a sense rom and do the media card scan fix to see if that works. IDK... Could be just the end of the Hero's life for me.
Click to expand...
Click to collapse
Try reflashing your recovery if you have not already. Try a new/different sd/card. Also you can try a nand of a rom were you weren't having the problems and TB the app+data then restoring it to your current rom. Also you can try a fastboot erase system if your s-off to have a definite clean start. "Warning" fastboot will erase everything. That's if you haven't tried it already. Well good luck
Yea it's Me Again With The
Modified Hero
Thanks Laie!
I did flash AOSP's latest recovery then back to Jason's then to the original 3.0.0.5 and back to AOSP's latest. Funny thing for me is that Pandora will play for about 5-10 songs then is will chop and freeze the phone. After a battery pull the Pandora is choppy but wont freeze the phone up until later. So I cleared cache, tried uninstalling and reinstalling and Nand. Same deal. I am going to test my songs on the SD card next just to be sure.
Then, new card. Phew.... This is fun... I am having fun... I think.
So question with regard to the streaming of Pandora. Is there a timeout setting for the phone to go wonky on Data? I am now wondering if the 3G or Data is dropping the ball. The screen sleeps fine and music continues. Then after about 10min (on average) it skips and locks the phone. I have sync and bluetooth disabled for now. Hooked up to the head phones.
692/276 no jit no frills. Hell I didn't even configure my mail yet.
Hmmm..
Figured I would isolate one issue at a time. Sorry for the hyjack of the thread OP. Maybe this will help you too.
Make sure you don't have a task killer running that's killing it off. I personally don't use them. They kill apps I'm running and eat up more battery imo. Just food for thought that one could be set too aggressive.
Sent from my HERO200 using XDA Premium App
Good suggestion but not using any either.
There is a setting in pandora to keep it happy, can't remember what it's called, but it's there. I also can tell you if you tried ondemand again, it would work. Also raising the min to 352 no matter the governor. Both of those methods have worked time and time again, try it. Edit: also, the new "purge assets", or vm heap, or compcache setting could affect it, but I doubt that's the issue.
I used fastboot reset device and let it reboot. Turned on Pandora and it's been playing strong for 45Mins. Here is run down.
Re partitioned 4 times using 1GB, 2GB, 4GB then back to 1GB. 256Ext size always. Re flashed fresh. Interactive 691/264 no jit. Crashed once. Rebooted, reset using fastboot, reboot and it has been playing through headphones for 50 Min now. Bluetooth is the next test. Thanks Duce and Laie.
I will add this is the first time in about 3 weeks I have been live for longer than 30 Mins. I tried CM7's and AOSP's. Much prefer AOSP's, less bloat and Zeam are a must for me.
EDIT: 1 Hour Headphones, VanHalen Channel
My plays stable with 19-691ondemand
il Duce said:
There is a setting in pandora to keep it happy, can't remember what it's called, but it's there. I also can tell you if you tried ondemand again, it would work. Also raising the min to 352 no matter the governor. Both of those methods have worked time and time again, try it. Edit: also, the new "purge assets", or vm heap, or compcache setting could affect it, but I doubt that's the issue.
Click to expand...
Click to collapse
Sent from my HTC Hero CDMA using XDA App
k im gonna try setting the cpu setting up, thanks for that suggestion.
and has anyone got the equalizer to work right? it seems to not work very well on the hero lol
FYI, I installed Blitzkrieg Kernel 1.0. My phone phone was very unstable and would restart often. Guess mine is one on the "picky" ones. Went back to GingerVolt 1.3 and all is well.
Thank you!
At least you got it installed, I couldn't even get that!
Sent from my Gingervolt-ed VS910 4G using xda premium
Mark Once Again said:
FYI, I installed Blitzkrieg Kernel 1.0. My phone phone was very unstable and would restart often. Guess mine is one on the "picky" ones. Went back to GingerVolt 1.3 and all is well.
Thank you!
Click to expand...
Click to collapse
Was it still unstable if you turned it down to 1GHz instead of keeping it at 1.5GHz?
I never could get that far. As soon as the phone was almost up it would restart. I tried about 5 or six times. I am happy with the phone without Blitzkrieg. Just thought I would pass along the info.
Thanks to all!
Make sure it's not plugged in on the initial boot after the install. Mine would reboot as well...until I unplugged it. Once in the OS, then I undercooked to a more stable 1.4GHz...
vortmax said:
Make sure it's not plugged in on the initial boot after the install. Mine would reboot as well...until I unplugged it. Once in the OS, then I undercooked to a more stable 1.4GHz...
Click to expand...
Click to collapse
I wonder why of all things, that would make a difference. You must've figured that out by chance? Haha
Sent from my Supercharged, Blitzed LG Revolution using xda premium.
I tried plugged into the usb on my pc, plugged into the charger and not plugged in at all. Same result each time. No complaint, just thought it might help having the info out there.
Thanks again!
You might try first installing a CPU utility like setcpu, and setting it to do no more than 1ghz on boot, and then flash it
Sent from my VS910 4G
Guys I have the same issues on GingerVolt 1.3 with the Blitzkrieg kernel.
Random reboots.
The phone starts vibrating randomly for like 10 seconds, then reboots. Happens like 10 times a day.
I tried to play with the SetCPU Over Clock settings, with no luck. I lowered max CPU to 1ghz max, I even removed set CPU, nothing has helped.
going to try to re-flash GingerVolt with the stock Kernel see if that helps. I don't need the OC Kernel if thats causing the issue.
brad08stanggt said:
Guys I have the same issues on GingerVolt 1.3 with the Blitzkrieg kernel.
Random reboots.
The phone starts vibrating randomly for like 10 seconds, then reboots. Happens like 10 times a day.
I tried to play with the SetCPU Over Clock settings, with no luck. I lowered max CPU to 1ghz max, I even removed set CPU, nothing has helped.
going to try to re-flash GingerVolt with the stock Kernel see if that helps. I don't need the OC Kernel if thats causing the issue.
Click to expand...
Click to collapse
Turn up the min. That fixed it for me
brad08stanggt said:
Guys I have the same issues on GingerVolt 1.3 with the Blitzkrieg kernel.
Random reboots.
The phone starts vibrating randomly for like 10 seconds, then reboots. Happens like 10 times a day.
I tried to play with the SetCPU Over Clock settings, with no luck. I lowered max CPU to 1ghz max, I even removed set CPU, nothing has helped.
going to try to re-flash GingerVolt with the stock Kernel see if that helps. I don't need the OC Kernel if thats causing the issue.
Click to expand...
Click to collapse
You can turn off the haptic feedback to minimize that vibration reboot but it won't solve the issue tho
BLITZ Bulletproof ledded AWD SuperCharged GV + Nitro ;p
For those who use blitzkrieg kernel I recommend using cpu tuner instead of setcpu
I've been testing both app extensively for the past 2 weeks and notice cpu tuner is much more stable than set cpu and both have the same features
I use the free set cpu verison that you can download on the xda site that's the same as the paid version you get on the market
BLITZ Bulletproof ledded AWD SuperCharged GV + Nitro ;p
Guys I seem to still be having the issue, I dont get it.
I did a factory reset, cleared all caches, and reinstalled plain old GingerVolt 1.3 for about 1 week with no issues. But i really didnt set up the phone completely, just installed the basics i need (work email, gmail, contacts, calendar, pandora).
I imagined it was the blitzkrieg kernel at this point, so I wouldn't put it back. so i did a titanium restore of my old apps and system data, but did not re-flash the blitzkrieg kernel. I figured this was my best way to get everything set up with my preferences again. I have specific settings for a lot of stuff, it would take forever to redo.
It was fine all day yesterday and today its rebooting again. Set CPU did reinstall as part of my restore.
Does gingervolt 1.3 do any undervolting/clock speed adjustments by default? My set CPU was set to min 245 and max 1024. I bumped up the 245 to 768, but I am wondering if that even the cause. What are the stock clock speeds? Or does it run at 1ghz all the time in stock form?
I have the same problem, my phone vibrates for ten seconds then resets. Or the screen stops working and I have to lock and unlock the phone for it to begin working again.
keynith said:
I have the same problem, my phone vibrates for ten seconds then resets. Or the screen stops working and I have to lock and unlock the phone for it to begin working again.
Click to expand...
Click to collapse
keynith, try to set the min cpu speed to 768 in setcpu.
So far after changing the min cpu speed i haven't had any issues again.
Did that yesterday and no problems since seemed to work
Sent from my VS910 4G using XDA App
brad08stanggt said:
Guys I seem to still be having the issue, I dont get it.
I did a factory reset, cleared all caches, and reinstalled plain old GingerVolt 1.3 for about 1 week with no issues. But i really didnt set up the phone completely, just installed the basics i need (work email, gmail, contacts, calendar, pandora).
I imagined it was the blitzkrieg kernel at this point, so I wouldn't put it back. so i did a titanium restore of my old apps and system data, but did not re-flash the blitzkrieg kernel. I figured this was my best way to get everything set up with my preferences again. I have specific settings for a lot of stuff, it would take forever to redo.
It was fine all day yesterday and today its rebooting again. Set CPU did reinstall as part of my restore.
Does gingervolt 1.3 do any undervolting/clock speed adjustments by default? My set CPU was set to min 245 and max 1024. I bumped up the 245 to 768, but I am wondering if that even the cause. What are the stock clock speeds? Or does it run at 1ghz all the time in stock form?
Click to expand...
Click to collapse
Best thing I can say to do is to Restore to default and install things one or two at a time. It's likely an App causing the issue. I have had that happen a few times on my Droid 2 Global. Every time I would run the Goggle Nav App, my phone would randomly reboot. Don't have it installed, would be perfectly fine, until I installed Pandora app. Some buggy apps can cause such issue, and also bad settings. So, I would suggest going the 'long way' and starting from scratch and installing only necessary apps one or two at a time. If things work good, move on to next apps. When things go bad, recall the apps you just installed where the problem occurred. Restore your phone, install only those apps and see if you have reboot issues. If so, you are closing in to finding the real problem. I doubt, even by the post you wrote, that it's the phone or hardware. You need a factory fresh restore, including wiping ALL data, including settings for your apps.
-Cybie
Well?
I don't know if you guys fixed your problems yet, but I kinda had some of the same issues and I do not use CPU Tuner or Set CPU! Also I know that when you install Blitz 1.3 It defaults to normal CPU speeds that are already in phone settings as checked by CPU Spy after flashing Blitz. I have been using Antutu CPU Master Pro to set speeds and profiles works great for the price I use it on my Viewsonic G-tablet as well! Anyway what my first issue is the screen locks I had them all the time and the only way I kept them from happening was to set my min at the 245.76 MHz and my all the time max at 1200MHz. I also set the screen off at 122.88MHz - 245.76MHz On demand scaling profile to keep it not wakening from sleep quick enough. Antutu has all kinds of settings in the Pro version and If you want a overclock I think its the best to use.
The only Issue I have not figured out is you guys get a 10 sec vibrate then a reboot I get a Vibrate forever until I reboot I got woke up this morning at 4:00 A.M. by my phone vibrating next to my bed only happens at night and only when I start receiving emails early in the morning. I tried several screen off settings and not having vibration on at all and still happens figure that one out and I will gladly try anything you come up with!!! The only time it doesn't do it is if it is plugged in and charging!
Softkey lights
I've successfully rooted my revo and have added gingervolt and blitzkrieg.
The softkeys will illuminate about every minute for a second or flash twice when in sleep-mode. I did some reading and tried to reboot and change display settings but they still keep going on and off. Any help is appreciated.
EDIT: charging to 100% fixed this.
Thanks for the quick reply and all your other posts too mt, they are very informative.
anangelablaze said:
I've successfully rooted my revo and have added gingervolt and blitzkrieg.
The softkeys will illuminate about every minute for a second or flash twice when in sleep-mode. I did some reading and tried to reboot and change display settings but they still keep going on and off. Any help is appreciated.
Click to expand...
Click to collapse
Charge it to 100% and it will stop
My nook is booting up fine, but once it gets to the android interface after a couple seconds or minutes, it just freezes and I can't do anything until I reboot. Has anyone else had any similar issues like this?
If this is a repost, I'm sorry just point me in the right direction as I could not find anything.
Edit: This may be linked to beautiful widgets? I have reflashed CM7 twice now, seems to be linked to that.
Yep, BW will do exactly that. Fancy Widgets is a decent alternative for a large clock widget
I've been having a similar problem after I rerooted and installed phiremod. I can rarely even boot up and have a functional tablet. It almost instantly freezes and must be reboot only to do it again.
reeeaaally pissing me off.
---------- Post added at 05:24 PM ---------- Previous post was at 05:10 PM ----------
after about 10 reboots I was able get it running long enough to uninstall beautiful widgets and after another reboot it seems to have solved the problem. Its a bummer though cause it a good app.
I had the same problems with Beautiful Widgets and the BeWeather widgets. I've read Fancy Widgets work and I'm currently using HD Widgets since it has a 4x4 widget and hasn't given me any problems.
Sent from my PG86100 using xda premium
I'm having a freezing problem, with pure, clean CM7. I can use the Nook for 1-10 minutes, browsing the web, and then it hard freezes. Then if I reboot it, it typically gets stuck in a CM7 bootloop the next 1-2 times I reboot it. Then eventually it will boot successfully again.
I tried switching to running CM7 from the SD card, didn't seem to change anything.
(I definitely do not have Beautiful Widgets, or anything else, installed. I even checked in Manage Applications--none found.)
mondegreen said:
I'm having a freezing problem, with pure, clean CM7. I can use the Nook for 1-10 minutes, browsing the web, and then it hard freezes. Then if I reboot it, it typically gets stuck in a CM7 bootloop the next 1-2 times I reboot it. Then eventually it will boot successfully again.
I tried switching to running CM7 from the SD card, didn't seem to change anything.
(I definitely do not have Beautiful Widgets, or anything else, installed. I even checked in Manage Applications--none found.)
Click to expand...
Click to collapse
Are you overclocked? And I assume since you mention SD card, you normally run from the internal storage? And is this a hard freeze while you're using it, or some time later while the screen is off?
1. Not overclocked. Completely pure, just-installed, CM7 with no changes to default settings. No GApps even.
2. I had the same problem when running from internal. Switched to the SD card to see if that would change anything--it didn't'.
3. Hard freeze occurs while using it.
Thanks!
I also had major freezing w/7.1. I flashed the last nightly (11/16/11) and gaaps.
http://download.cyanogenmod.com/?device=encore
Although freezing might happen once in awhile, it's rare now. I only use one widget (wifi signal). Everything else is pretty much default. No overclocking, live wallpaper, themes, etc.
I've downloaded about 20 apps so far.
Yep, it is caused by beautiful Widgets. I had the same thing happen and I posted on their development forums. I was able to get the startup logs and send them to the developer. Then the response was he could not figure out the bug. The logs clear showed a problem when trying to load the bw, but the bug may have been down deeper the operation system.
Not sure. But bummed none the less.....
Sent from my NookColor using Xparent Green Tapatalk
I was having a similar issue. However I didn't have Beautiful Widgets installed. I solved this by going to the Cyanogen CPU settings. I set minimum to 800mhz, max to 1200mhz and the profile to performance. I also checked the SET ON BOOT (can't recall the exact wording.) After a reboot, I haven't experienced any freezing. Hope this helps you guys.
Thanks.
I will give that a try with a beautiful widget on my home screen. then I will report back on my findings.
Update: nope that did not fix the problem for beautiful Widgets. I made your changes, rebooted, added a super clock widget to my home screen, rebooted, it froze. Thanks for the idea, though.
Sent from my DROID2 using Xparent Green Tapatalk
I've been following this thread as I have been experiencing the same thing, I ridded the nook of BW and it hasn't helped the freezing upon boot issue, even knocked up the min setting to 800. I've reflashed a million times. This came out of no where.
Edit: its getting really annoying. This thing isn't even useful. Never occurs with the ics preview. Only with any cm rom.
Sent from my PG06100 using xda premium
Sorry to hear that. The only time I have really experienced freezing, it was always because of some application. Is there some application that you always install that could be causing the issue. I know at one point it seemed like a certain version of flash would freeze mine, even if it was just installed not being used. Are you using the most recent stable build of cm7?
for now I have switched to ics on my nook, just for fun, I wanted to be able to make my own nightlies so I set that up . Will have to try a beautiful widget on there once I make a backup.
Sent from my DROID2 using Xparent Green Tapatalk
same issue here , mine freezes after an hour of use, ... i have nightly 10252011 with the oc kernel . i just change the cpu setting and will report back if this solves the problem , if not then i guess i will try the stable cm7.
---------- Post added at 04:10 PM ---------- Previous post was at 03:30 PM ----------
carlosraf20 said:
same issue here , mine freezes after an hour of use, ... i have nightly 10252011 with the oc kernel . i just change the cpu setting and will report back if this solves the problem , if not then i guess i will try the stable cm7.
Click to expand...
Click to collapse
reporting back still freezes , i will install cm-7.1.0-encore-signed.zip stable tonight and see what happens, what oc kernel to go with stable cm?
So for what it's worth currently beautiful Widgets seem to work on nook color ICS without freezing it up. But ICS is still in it's infancy.
By the way are you running off an sd card or Emmc? Running off an sd card is not nearly as good and that can cause a lot of freezing. Just throwing that out there.
Sent from my NookColor CM9 pre-alpha using Xparent Green Tapatalk
Thanks for all the replies guys, I found out it was nook tweaks causing the issue. Removed it, and it's been running fine ever since. I'm on Kang cm7
Sent from my PG06100 using xda premium
peanjr said:
Thanks for all the replies guys, I found out it was nook tweaks causing the issue. Removed it, and it's been running fine ever since. I'm on Kang cm7
Sent from my PG06100 using xda premium
Click to expand...
Click to collapse
how do u find out it was nook tweaks that was causing this?
Because it always ran just fine, until I installed nook tweaks checked "set on boot" for the cpu settings. I didn't change them, just ticked it. After that, anytime i rebooted, it was a fight to keep it on. So i removed the last thing i put on there, nook tweaks. Its not froze one time and I've rebooted it a whole since then. I reinstalled it but never opened the cpu settings, just edit the audio stuff, no freezes. Kinda wierd.
Sent from my PG06100 using xda premium
I just install cm 7.1 stable and change the kernel to daligrin 603011 and still having freezing issues . I don't want to do it ,but i guess i will have to do a complete wipe and then install cm 7.1 fresh.
Nook Color freezing issues
I too have having freezing issues.
Symptoms: I'll be using my Nook Color with no issues when it suddenly just locks up. No error of any sort on the screen. Screen does not black out. It just locks up. I think everytime it has happened has been after I've transferred several MB (over 5 at least) of data over Wi-Fi.
I'm running CM7.2.0 RC0 KANG build from 11/30/2011 from eMMC.
I'm overclocking to 1200 with the Min CPU set to 800 and the governor set to Performance. I also tried Max CPU at 1100 but that didn't make a difference. I'd had Min CPU at 300 but moved to 800 based on a suggestion found here. Setting the Governor to Ondemand didn't make a difference either.
I do have Nook Tweaks installed but have changed nothing from the defaults and nothing is set to start up at boot time. (I use it to get to USB Host Mode.)
With this build I haven't had any screens of death like I was getting on CM7.1. Just the freeze-ups.
Anyone else seeing a pattern with Wi-Fi?
I've never installed Beautiful Widgets.
This is a common problem since the very beginning. The only way to stop it from occuring is if I leave it on Browser and put it to sleep.
I just installed the latest CM9 and the problem still occurs.
Is there anyway to fix it?
Sepharite said:
This is a common problem since the very beginning. The only way to stop it from occuring is if I leave it on Browser and put it to sleep.
I just installed the latest CM9 and the problem still occurs.
Is there anyway to fix it?
Click to expand...
Click to collapse
After the first time you get it to sleep without rebooting, you can turn off the screen at any point without a problem, right?
Try raising up the minimum clock speed to 384 and see what happens.
Minimum cpu was already raised. I changed the schedule to deadline,let's see if this works.
Sent from my GT-I9100 using Tapatalk 2
Caches were cleaed upon installing the latest nightly? Used to have that problem with some of the very first nightlies, TP would reboot upon turning off the screen, clearing caches fixed that.
I have the same, or similar problem
allstar319 said:
Caches were cleaed upon installing the latest nightly? Used to have that problem with some of the very first nightlies, TP would reboot upon turning off the screen, clearing caches fixed that.
Click to expand...
Click to collapse
I have the same, or similar problem but unfortunately have not found a fix after trying every possible remedy from clearing the cache and upping the min frequency to a complete uninstall with acmeuninstaller . Clearing the cache may fix it for a small amount of time but it always seems to come back. I tried upgrading with both goo and with CWM thinking one may be missing something but both have the same results.
I managed to trace the problem to wifi turning off when sleeping for me. If i set wifi to stay on during sleep it does not happen, if I use a widget to go into airplane mode on sleep it does not happen but if i set wifi to turn off during sleep it happens. It may take a day or two to manifest but it always seems to come back.
I finally ended up using the 7/7 nightly because it doesn't do it and i dont feel like finding the exact nightly that the bug manifested in. I know it was after 7/7 and prior to 8/9. It is a pain as the 7/7 has some lag not found in the later nightly but if the choice is lag or greater battery drain, I choose lag.
Anyway..... Sorry to jack your thread. I feel for you, the reboot on sleep make the TP unusable. If you do manage to find a fix because i still search the forums hoping to see something i haven't tried yet.
Making the cpu scheduler to Deadline fixed the problem so far.
Sent from my GT-I9100 using Tapatalk 2
same problem
hello guys,
I have the same reboot-problem. I tried almost anything...
@Sepharite
Is it still fixed with cpu scheduler to Deadline?
If yes, how did you do that?
I just installed the app "No-frills CPU Control" und turned the cpu scheduler to Deadline, but it still reboots.
I have only no reboots, when I'm using the touchpad after booting for a while.
Anyone has an idea?
esemudeo said:
hello guys,
I have the same reboot-problem. I tried almost anything...
@Sepharite
Is it still fixed with cpu scheduler to Deadline?
If yes, how did you do that?
I just installed the app "No-frills CPU Control" und turned the cpu scheduler to Deadline, but it still reboots.
I have only no reboots, when I'm using the touchpad after booting for a while.
Anyone has an idea?
Click to expand...
Click to collapse
I've had the same problem for months. At this point, we may have to live with it. I find that if you let the device time out of its own, about 80% of the time it won't reboot again. It definitely serves as a reminder that we aren't in stable build territory yet (though, some people apparently don't experience this).
Sent from my SCH-I535 using Tapatalk 2
Infinite Jest said:
I've had the same problem for months. At this point, we may have to live with it. I find that if you let the device time out of its own, about 80% of the time it won't reboot again. It definitely serves as a reminder that we aren't in stable build territory yet (though, some people apparently don't experience this).
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
Thanks for the answer. I have to ask, you don`t have this problem anymore?
esemudeo said:
Thanks for the answer. I have to ask, you don`t have this problem anymore?
Click to expand...
Click to collapse
No, I still have this issue. I just live with it and try to minimize rebooting (which in have to do every couple of days anyway, thanks to match some point all of my apps crashing a couple of times when I try to open them unless I reboot.)
hey guys, good news.
User Sohip wrote in another thread, he also had reboots, but after he disabled the lock screen it stopped rebooting.
So I disabled the lock screen, and it seems to work. You should try it.
---------- Post added at 10:27 AM ---------- Previous post was at 10:22 AM ----------
oh, now I get reboots again
---------- Post added at 11:00 AM ---------- Previous post was at 10:27 AM ----------
By the way, just in case, somenone tries ot fix this reboot-problem.
When the touchpad goes to sleep, it makes a „click“-sound, and then it reboots.
At least my touchpad makes a „click“-sound.
I haven't had a lock screen for months and the problem has persisted.