Does v21a and v21e support at&t's "4G"? Just wondering because I hear those basebands are ghost call free and I'd like to give it a shot.
Sent from my LG-P925 using XDA
4g is all dependant on your location ..its very spotty and I'm not sure but I think you have to change the flex XML which gets a little tricky bit there is a thread on here that talks about it
Sent from my SGH-i677 using XDA Windows Phone 7 App
Yeah I know about the flex file. Aria has an entire thread on it. It just makes me wonder because v20p is the only one that gives me a good signal even though on v20c it uses the exact same baseband and signal strength is poor. Is v20p the only one with good strength?
Sent from my LG-P925 using XDA
yourguitarist said:
Yeah I know about the flex file. Aria has an entire thread on it. It just makes me wonder because v20p is the only one that gives me a good signal even though on v20c it uses the exact same baseband and signal strength is poor. Is v20p the only one with good strength?
Sent from my LG-P925 using XDA
Click to expand...
Click to collapse
I've used 20c 21d and 20p has been the best signal ... But i liked 21d too
Sent from my SGH-i677 using XDA Windows Phone 7 App
JReeher said:
I've used 20c 21d and 20p has been the best signal ... But i liked 21d too
Sent from my SGH-i677 using XDA Windows Phone 7 App
Click to expand...
Click to collapse
Hahahaha I guess my phone is just borderline faulty. I hardly have good signal strength when I change the flex file and on the acid hazard rom my phone doesn't vibrate at all.
Also by poor signal, I mean it's poor after flex file changes
Sent from my LG-P925 using XDA
Please go to advance edition and change the title thread according to forum rules#3. Thanks
poyensa said:
Please go to advance edition and change the title thread according to forum rules#3. Thanks
Click to expand...
Click to collapse
Done & done good sir.
JReeher said:
I've used 20c 21d and 20p has been the best signal ... But i liked 21d too
Sent from my SGH-i677 using XDA Windows Phone 7 App
Click to expand...
Click to collapse
What about V20G? Or do they all support well?
yourguitarist said:
What about V20G? Or do they all support well?
Click to expand...
Click to collapse
Never used 20g ..I'm done with my thrill though im using Samsung focus flash something differen trying to sell my thrill I'm tired of being so far behind with the times and LG ...
Sent from my SGH-i677 using XDA Windows Phone 7 App
JReeher said:
Never used 20g ..I'm done with my thrill though im using Samsung focus flash something differen trying to sell my thrill I'm tired of being so far behind with the times and LG ...
Sent from my SGH-i677 using XDA Windows Phone 7 App
Click to expand...
Click to collapse
Same here! I think I might start saving up for a new phone and sell this one. I won't be able to handle how problematic it is until my upgrade which won't be for a while.
yourguitarist said:
Does v21a and v21e support at&t's "4G"? Just wondering because I hear those basebands are ghost call free and I'd like to give it a shot.
Sent from my LG-P925 using XDA
Click to expand...
Click to collapse
I have this phone on that band i was skeptical to at first because i heard
the base frequency's are what you flash for tmobile but just flashed it an hour ago and my "HSPA" is running fine :good:
A funny thing happened to me when using promethius v21e. I read it needed to mess with the flex and the apn to get 4G on my 925. So I did all of that stuff with replacing the dialer and contacts because of the force closes and I thought it was going well. But after a while it became pretty annoying the gapps would crash in the background all the time so I wiped all of the cache and reinstalled the base promethius zip v21e from my sd card. After that I didn't mess with flex or anything else and had normal att signal strength 6 mbps. I couldn't remember the apn that gives me 12 mbps off the top of my head so I just created one named it phone, and for apn I put phone and then hit save. First test of this setting gave me14.9 mbps speed test with zero change to stock flex or dialer. Running smooth and fast for 2 days.
whycali said:
A funny thing happened to me when using promethius v21e. I read it needed to mess with the flex and the apn to get 4G on my 925. So I did all of that stuff with replacing the dialer and contacts because of the force closes and I thought it was going well. But after a while it became pretty annoying the gapps would crash in the background all the time so I wiped all of the cache and reinstalled the base promethius zip v21e from my sd card. After that I didn't mess with flex or anything else and had normal att signal strength 6 mbps. I couldn't remember the apn that gives me 12 mbps off the top of my head so I just created one named it phone, and for apn I put phone and then hit save. First test of this setting gave me14.9 mbps speed test with zero change to stock flex or dialer. Running smooth and fast for 2 days.
Click to expand...
Click to collapse
Could you pm me that apn or post it on here?
Sent from my LG-P925 using XDA
yourguitarist said:
Could you pm me that apn or post it on here?
Sent from my LG-P925 using XDA
Click to expand...
Click to collapse
This the only apn I created. the rest is default and save.
whycali said:
This the only apn I created. the rest is default and save.
Click to expand...
Click to collapse
Do you get mms?
yourguitarist said:
Do you get mms?
Click to expand...
Click to collapse
to clarify, I only added the phone apn. I did not touch the apn for cingular that comes with promethius.
after you asked about mms I had my daughter send me one to find out. I did not get the mms until I modified my "phone" apn to apn type "default,internet" still leaving the original apn untouched. Ran another speed test seems okay.
Related
I thought you guys might want this gordec posted this yesterday all credit to him. http://forum.xda-developers.com/showthread.php?t=1389041
I thought you guys might want this gordec posted this yesterday all credit to him. http://forum.xda-developers.com/show....php?t=1389041
Click to expand...
Click to collapse
nice now we have figure out how pull out baseband. is this a nandroid dump if it is I don't think its possible.
I need a help here
The nitro uses a qcom chipset, the thrill uses a omap chipset. What do you plan on accomplishing with the nitro dump?
The baseband for the modem
Sent from my LG-P925 using xda premium
The nitro has a LTE modem, whereas the Thrill has HSPDA, not all 4g being equal... unfortunately I think we're still stuck...
The nitro has a LTE modem, whereas the Thrill has HSPDA, not all 4g being equal... unfortunately I think we're still stuck
Click to expand...
Click to collapse
however it can be useful we can borrow some apks themes and it should has hspda
modem too coz it gets H+ speed where ever LTE is not available here is thing optimus 3d has 3g modem not H+ we still able get it why not nitro should have H+ and LTE both
The question is whos gonna do it who is gonna risk their phone?
ueshada said:
however it can be useful we can borrow some apks themes and it should has hspda
modem too coz it gets H+ speed where ever LTE is not available here is thing optimus 3d has 3g modem not H+ we still able get it why not nitro should have H+ and LTE both
Click to expand...
Click to collapse
it makes sense in theory... But first I think we need an easier way of flashing base band...
Sent from my LG Thrill 4G...
Lte uses another hardware radio, so the nitro would use 2 seperate chips for signal
Sent from my LG-P925 using xda premium
Lte uses another hardware radio, so the nitro would use 2 seperate chips for signal
Click to expand...
Click to collapse
thats is the exact thing im saying if can pull out H+ how nice our life can be
Trekfan422991 said:
it makes sense in theory... But first I think we need an easier way of flashing base band...
Sent from my LG Thrill 4G...
Click to expand...
Click to collapse
I agree with Trekfan..., the way we have to flash BaseBands right now, is very difficult, if you don't have the guide down don't do it, you'll definatelly brick your thrill
I agree with Trekfan..., the way we have to flash BaseBands right now, is very difficult, if you don't have the guide down don't do it, you'll definatelly brick your thrill
Click to expand...
Click to collapse
well before we need find a essayer way we need figure out any way do it
it between possible and impossible for ryt now
we need rdannar here he is the one taking all risks
Didn't get my replacement yet
Sent from my SAMSUNG-SGH-I777 using xda premium
I plan on porting the ROM not baseband
Flashing modems from another device doesn't usually work
Sent from my SAMSUNG-SGH-I777 using xda premium
I plan on porting the ROM not baseband
Click to expand...
Click to collapse
do you still have ur broken phone try port nitro base band see its can be flashed if we able get baseband
I don't think there are any Devs yet that can post modem
Sent from my SAMSUNG-SGH-I777 using xda premium
And no system tar or Fls available
Sent from my SAMSUNG-SGH-I777 using xda premium
I will be getting a new phone in january, this means I will be able to start risking the thrill and see where we can go...we will have nice roms coming.
I know a guy that make a 1click flash baseband. Lemme shoot him an email. I was gonna learn from him how to make one but we've both been too busy to meet up. I'll shoot him an email and see if he has time to develop one.
i'm all for one click change, make it happen please
I am deodexing .apks and framework right now, so I can compare O3D and Nitro's system, after that gonna try to build a bootable ROM using Nitros system files. But after watching some youtube reviews, it seems like the entire interface is the same laggy **** LG interface we have on our devices, so I am not very excited about getting something better than what we already have.
Hey all,
I wanted to make a quick post showing you guys the various speeds I've been getting on my Thrill on Straight Talk's Unlimited $45/month plan. I'm in Wisconsin, if you're wondering. Needless to say, speeds are pretty incredible and I'm very pleased. This is for all you out there that are worried that moving to Straight Talk isn't a good idea. Cheers!
Sent from my LG-P920 using Tapatalk 2
Which baseband are you using?
Sent from my CM Thrilla
Markyzz said:
Which baseband are you using?
Sent from my CM Thrilla
Click to expand...
Click to collapse
I'm not entirely sure...where could I go to check for you?
Menu button, Setting, scroll down to about phone and there you have all info as far as android version baseband build number and kernel is all there
sent from my acidhazard thrill
wayno140 said:
Menu button, Setting, scroll down to about phone and there you have all info as far as android version baseband build number and kernel is all there
sent from my acidhazard thrill
Click to expand...
Click to collapse
Got it, Ill post it when I get home.
Sent from my LG-P920 using Tapatalk 2
Im on 20p I get highest 5mb that's usually late at night I live about 4500 ft from the tower closest during the day lots of usage in my area boggs me down to about 200-475kb/s
Sent from my LG-P920 using XDA
Heard ics coming don't know of true or not
Sent from my LG-P925 using XDA
lazylu said:
Heard ics coming don't know of true or not
Sent from my LG-P925 using XDA
Click to expand...
Click to collapse
Links or gtfo. The hardware is there (independent GPU), and the power is there (dual-core CPU, 512mb RAM) for ICS but this has been a pipe dream at best, please don't get our hopes up with more rumors. If you have a link, please SOS (Save Our Sanity) and post it.
This was on the o3d fourm
Sent from my LG-P925 using XDA
All we have to go on is this:
http://forum.xda-developers.com/showpost.php?p=27686065&postcount=11
Not entirely sure it is reliable.
According to Engadget: http://www.engadget.com/2011/12/26/lg-announces-ics-upgrades-to-begin-in-q2-2012/
According to LG's Facebook Post: https://www.facebook.com/note.php?note_id=334420639902596
I noticed they still have left the Thrill out of the loop. !
cmarriner82 said:
All we have to go on is this:
http://forum.xda-developers.com/showpost.php?p=27686065&postcount=11
Not entirely sure it is reliable.
According to Engadget: http://www.engadget.com/2011/12/26/lg-announces-ics-upgrades-to-begin-in-q2-2012/
According to LG's Facebook Post: https://www.facebook.com/note.php?note_id=334420639902596
I noticed they still have left the Thrill out of the loop. !
Click to expand...
Click to collapse
Yea u right Idky they left it out maybe like gb there gonna release it way past its time smh
Sent from my LG-P925 using XDA
lazylu said:
Yea u right Idky they left it out maybe like gb there gonna release it way past its time smh
Sent from my LG-P925 using XDA
Click to expand...
Click to collapse
Something tells me LG just doesn't want to deal with AT&T's basebands for this phone.
cmarriner82 said:
Something tells me LG just doesn't want to deal with AT&T's basebands for this phone.
Click to expand...
Click to collapse
LG not even reliable
Sent from my LG-P925 using XDA
cmarriner82 said:
Something tells me LG just doesn't want to deal with AT&T's basebands for this phone.
Click to expand...
Click to collapse
And for this reason alone I flashed to a European baseband and have T-Mobile USA now.
Cynagen said:
And for this reason alone I flashed to a European baseband and have T-Mobile USA now.
Click to expand...
Click to collapse
LOL. I would do the same as you (Ask for a step by step.) however, T-Mobile gets crap for reception in my town. It's not even 2G in my town, so no point in using it. AT&T in my area just recently upgraded to HSPA+. There is no 4G LTE (Even for Sprint or Verizon.)
Lol u on. 1g
Sent from my LG-P925 using XDA
lazylu said:
Lol u on. 1g
Sent from my LG-P925 using XDA
Click to expand...
Click to collapse
AT&T is the only carrier in my town, for some reason that has 3G or HSPA+ coverage.
It's how backwoods my town is.
I myself am connected to HSPA+. When I was on Sprint and had my Evo 4G, I had to go to Boston (Over an hour drive) to be able to test it out. Otherwise I'd get about 600 KBPS or so download.
O lol
Sent from my LG-P925 using XDA
all we need is ics for 3d max... then 920 and 925 users can enjoy it
Sent from my LG-P920 using xda premium
I read somewhere on here that the only thing holding up ICS on the Thrill/O3D is a camera app that's built or the dual cameras and ICS.
cmarriner82 said:
I read somewhere on here that the only thing holding up ICS on the Thrill/O3D is a camera app that's built or the dual cameras and ICS.
Click to expand...
Click to collapse
That's the Guy making the cw and he also said there's no audio where u hear this from?
Sent from my LG-P925 using XDA
lazylu said:
That's the Guy making the cw and he also said there's no audio where u hear this from?
Sent from my LG-P925 using XDA
Click to expand...
Click to collapse
Not sure. I read it in the O3D forums.
OK so today is the 23rd and I woke up and ran in here to see if santa had come last night....I still dont see any ICS hahahahahahahahaha
Lol ikr I also woke early to check
Sent from my LG-P925 using XDA
and a late check aint working either LOL
still waiting.........
This is to fix Mms message on metropcs flashed sprint galaxy s 4 your phone most already be flashed to metropcs with working internet, Flash the zip in recovery and reboot, mms messages should work from first boot. This will last thru a factory reset.
Edit: I was ask to add some details as to wat the zips doing and wat I do. I edit the mms-config.xml in the stock Mms.apk/SecMms.apk to settings from verizon which work for metropcs, I also use an apns-conf.xml that I edited for metropcs. the zip will mount data and mount system, it will delete Mms.apk/SecMms.apk and Mms.odex/SecMms.odex, it will delete dalvik-cache for Mms.apk/SecMms.apk, it will delete the telephony.db file in /data/data/com.android.providers.telephony/databases/ which countains apns. it will replace Mms.apk/SecMms.apk with the one I edited for metropcs it also replaces the apns-conf.xml in /system/etc/ which countains the default apns for the one I edited for metropcs (on first boot the phone will create a new telephony.db with the default apns countained in this apns-conf.xml, that is why this fix lasts thru a datawipe/factory reset). For more details take a look at the updater-script.
for the 4.3 script, flash the zip - reboot to system. Then open dialer and dial ##3282# hit edit enter spc then go to more then lte apn settings and click the circle on the right of the global roaming apn to activate it then hit home and all should be good
if you have issue where messaging app has default android icon use root explorer go to /system/app long press on SecMms.apk select move hit back hit back again go to /sdcard and paste SecMms.apk on sdcard, it should now show the up on sdcard with normal icon long press on SecMms.apk select move hit back go to /system/app and paste SecMms.apk back in /system/app and reboot phone should now show normal messaging icon
I am not responseable for anything that happens
Thanks to uncorrupted for the build.prop editor
New zip here: http://forum.xda-developers.com/showthread.php?t=2766197
maybe
do you think this could work for a verizon s3 to metro?
robcop19 said:
do you think this could work for a verizon s3 to metro?
Click to expand...
Click to collapse
U can try it but apns will probably not show I can try to make u a zip if u will test it
Sent from my SPH-D710 using xda app-developers app
Yea I can test it. If anything goes wrong I can always restore from a nandroid I would think
Sent from my SCH-I535 using xda premium
Another oakieville mms fix now for theGS4...great
robcop19 said:
Yea I can test it. If anything goes wrong I can always restore from a nandroid I would think
Sent from my SCH-I535 using xda premium
Click to expand...
Click to collapse
U wouldn't even need to do that just backup up /system/app/secmms.apk to sdcard and backup /system/etc/apns-conf.xml to sdcard so u can restore them if anything goes wrong. Can u send me ur build.prop and apns-conf.xml
yup gimme about an hour
Sent from my SCH-I535 using xda premium
here
im not too sure how to upload the files
Is metro better than boost? Reason I ask is bc im going to be flashin my phone soon
Sent from my SPH-L720 using xda premium
Yes. More towers better coverage and better internet
Sent from my SCH-I535 using xda premium
robcop19 said:
Yes. More towers better coverage and better internet
Sent from my SCH-I535 using xda premium
Click to expand...
Click to collapse
Hang on...I must clarify. As much as I love to profit off of Metro flashes, we need to get the facts straight.
Flashed phones to Metro will not work nationwide. Boost will. Metro has better talk & text in their coverage area, but their data can either be equal to or slightly slower then Boost (depends what time of the day you're on the network). We also JUST got 3g here in the Tampa Bay area, and we're a huge market, go figure.
Sent from my Galaxy Nexus using Tapatalk 2
maybe
cbernardo13 said:
Hang on...I must clarify. As much as I love to profit off of Metro flashes, we need to get the facts straight.
Flashed phones to Metro will not work nationwide. Boost will. Metro has better talk & text in their coverage area, but their data can either be equal to or slightly slower then Boost (depends what time of the day you're on the network). We also JUST got 3g here in the Tampa Bay area, and we're a huge market, go figure.
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
ive had very good luck though if i may say so myself. i have traveled to florida new york san francisco and alabama and gotten very good coverage on my flashed s3 from verizon and im suing the 3033 prl in atlanta. its faster than i could have hoped for. i have heard though before that flashed phones do not work well outside of the state theyre flashed in but aside form that metro itself has bigger coverage than boost and sprint. and now they are merging with t-mobile although im still not sure how thats working out because theyre rolling out city by city certain thing such as hartford dallas baltimore and i think boston.
robcop19 said:
im not too sure how to upload the files
Click to expand...
Click to collapse
Try this let me know how it goes http://oakieville.com/mysite/external/files/Verizon-GS3-4.1.2-metropcs-mms-fix-signed.zip
Sent from my SPH-L900 using xda app-developers app
done it
oakieville said:
Try this let me know how it goes http://oakieville.com/mysite/external/files/Verizon-GS3-4.1.2-metropcs-mms-fix-signed.zip
Sent from my SPH-L900 using xda app-developers app
Click to expand...
Click to collapse
hey sorry i took so long to get back to you. i did install your zip and been metroized jaja ill test it out and see
zip
oakieville said:
Try this let me know how it goes http://oakieville.com/mysite/external/files/Verizon-GS3-4.1.2-metropcs-mms-fix-signed.zip
Sent from my SPH-L900 using xda app-developers app
Click to expand...
Click to collapse
so i tried the zip file and flashed it in recovery. i tried sending something though but it wouldnt work but when i send a picture, as long as i have wifi on, the 3g symbol appears in the status bar but its never done that before even if im not conected to wifi. i have internet working on my phone but its never shown the connection but its blazing fast
robcop19 said:
so i tried the zip file and flashed it in recovery. i tried sending something though but it wouldnt work but when i send a picture, as long as i have wifi on, the 3g symbol appears in the status bar but its never done that before even if im not conected to wifi. i have internet working on my phone but its never shown the connection but its blazing fast
Click to expand...
Click to collapse
Wat u mean u have internet but its never shown the connection if internet works with wifi off it will show 3g/1x if no 3g/1x and not on wifi then no internet
Any tutorial how to flash it.
Sent from my SPH-L720 using xda app-developers app
rojohacker said:
Any tutorial how to flash it.
Sent from my SPH-L720 using xda app-developers app
Click to expand...
Click to collapse
Follow bloodykillers guide for the evo its old but solid except for ha password and aaa password leave it blank don't put metropcs also u have to set it to nv only instead of ruim only on lte phone but basically same as flashing any other phone. I will stay away from discussing the whole getting meid on metro thing tho lol
Sent from my SPH-L900 using xda app-developers app
cbernardo13 said:
Hang on...I must clarify. As much as I love to profit off of Metro flashes, we need to get the facts straight.
Flashed phones to Metro will not work nationwide. Boost will. Metro has better talk & text in their coverage area, but their data can either be equal to or slightly slower then Boost (depends what time of the day you're on the network). We also JUST got 3g here in the Tampa Bay area, and we're a huge market, go figure.
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
interesting. almost a year ago we had 3g coverage over here in saint pete, i had to use a special prl on my step brothers admire 3g to get it to load up right though.
now a days its all lte anyways so no one uses 3g
Then you would have been the first. I've been flashing in this area for over 2 years at least, and none of my fellow flashers in the area got 3g besides 1 tower near University Mall.
Can you tell us about this special prl?
Sent from my Galaxy Nexus using Tapatalk 2
I have been having problems with the stupid T-CDMA 64 problem and being OCD-ish I wanted to fix it.
This zip is for the peoples who were having a hard time figuring this out..
It flashes the correct file needed to fix the Verizon Wireless banner.
I have tested it on AOSP and Stock and it seems to work just fine.
It happens whenever I use a custom kernel, try it out and see the results.
je2854 said:
I have been having problems with the stupid T-CDMA 64 problem and being OCD-ish I wanted to fix it.
This zip is for the peoples who were having a hard time figuring this out..
It flashes the correct file needed to fix the Verizon Wireless banner.
I have tested it on AOSP and Stock and it seems to work just fine.
It happens whenever I use a custom kernel, try it out and see the results.
Click to expand...
Click to collapse
I'm not familiar with this issue. Shed some light?
Sent from my VS980 4G using XDA Premium 4 mobile app
BreakingVZW said:
I'm not familiar with this issue. Shed some light?
Sent from my VS980 4G using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I'll revert back and take some screen-shots shortly...
but in short it would show T-CDMA 64 in a phone call or on the banner
instead of Verizon Wireless
BreakingVZW said:
I'm not familiar with this issue. Shed some light?
Sent from my VS980 4G using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Example would be: on the lock screen at the bottom it days Verizon wireless. On some Roms it will say T-CDMA instead.
Data works as intended, just looks different/annoying.
Sent from my VS980 4G using xda app-developers app
No T-CDMA 64 banner
This is what the OP is talking about.
Didn't work for me
Sent from my VS980 4G using xda premium
Everything is stock (battery is xposed)
Let me dig deeper, there is nothing else changed...
Sent vigorously using XDA Premium
if you actually put "Verizon Wireless" instead of blank "" you could submit this to CM gerrit for inclusion. another note, their file includes some other content that should remain in the file, so you'd need to add your lines to theirs
iXNyNe said:
if you actually put "Verizon Wireless" instead of blank "" you could submit this to CM gerrit for inclusion. another note, their file includes some other content that should remain in the file, so you'd need to add your lines to theirs
Click to expand...
Click to collapse
It already shows Verizon Wireless on CM11. It used to say "PREFERRED NETWORK"
woah op not to derail the thread but what rom/theme is that. it looks awesome
Ejames991 said:
woah op not to derail the thread but what rom/theme is that. it looks awesome
Click to expand...
Click to collapse
Stock with Sense 5
je2854 said:
Stock with Sense 5
Click to expand...
Click to collapse
could you point me in the right direction of finding that?
EDIT: Nvm found it! Thanks though
Thanks for sharing but it didn't work for me on 12b stock with Dorimanx 2.8 kernel.
Sent from my VS980 4G using Tapatalk
garywojdan81 said:
Thanks for sharing but it didn't work for me on 12b stock with Dorimanx 2.8 kernel.
Sent from my VS980 4G using Tapatalk
Click to expand...
Click to collapse
+1
Sent from my VS980 4G using Xparent Green Tapatalk 2
Not at the computer right now, I'll check it at work tomorrow morning.
Written so fly like a G2
I had the same problem. When I install the cloudy flex rom, the signal bars would say i was roaming. I tried to do *228 option 2 and it worked. But after that it would show t-cdma 64. Then I tried the mahdi rom and the same thing. I reverted back to stock, 10b first, then 11a, then 12b. Took it back to the Verizon store and they said it had the wrong prl. They put in a new sim card and everything back to normal. Also when this happened, my 4g wasn't working and I would not get all text and calls. All is working now after the new sim card. The prl version for verizon 4g lte is 15287.
Different people will have different PRLs for their geographic location.
Written so fly like a G2
bashall said:
I had the same problem. When I install the cloudy flex rom, the signal bars would say i was roaming. I tried to do *228 option 2 and it worked. But after that it would show t-cdma 64. Then I tried the mahdi rom and the same thing. I reverted back to stock, 10b first, then 11a, then 12b. Took it back to the Verizon store and they said it had the wrong prl. They put in a new sim card and everything back to normal. Also when this happened, my 4g wasn't working and I would not get all text and calls. All is working now after the new sim card. The prl version for verizon 4g lte is 15287.
Click to expand...
Click to collapse
The *228 is probably what fried your SIM card. That is not recommended with the 4g SIMs because they're already initialized when you register your device on the network. Anything you do after the fact will only create an opportunity to corrupt the SIM data.
Sent from my VS980 4G using Tapatalk
I have uploaded and looked into the problem...
flash the new file in recovery and wipe dalvik and cache.
Give me your results please.