Can anyone help i have upgraded my phone after much trouble trying to unlock it via market apps & superoneclick neither worked and the phone ended up going into some dead mode and wouldnt fully load up.
So in still trying to end up with a network unlocked phone i have managed to upgrade my phone to GINGERBREAD.XXJVQ 2.3.4 which was successful and work perfectly over my broadband wireless network but when i try to make calls it tell me
"MOBILE NETWORK NOT AVAILABLE"
the mobile was previously on three uk network but is now debranded obviously with gingerbread
i tried a hard reset via *2767*3855* but still no change.
any help greatly appreciated many thanks in advance
Ged
Just look like your phone have been locked on three network.and your unlock is failed.
Did you try found any phone shop on market to unlock your phone?
probably just five pound for each one on Chinatown.
I was stay in UK for 3 year,and as I know, the Chinatown guys have special device for unlock phone ,one simply for all,whatever you upgrade rom,you will be never locked again.
I'm not sure about that really cause it also does this with my correct network sim card still installed......
You've checked your apn settings? Sounds top suspect to me.
If you've still got problems, flash ezbase gingerbread. Search dev section, full, simple instructions included.
I tried that it tells me i should
"insert a sim card to access network services"
Could you point me in the right direction so i know im using the right programs and files
Please check your IMEI number by dialing *#06# on the keypad. If it displays the correct imei number as displayed on the Phone box/ under the battery, then you are saved. If not you have lost your efs folder which contains the files which hold the imei data.
Did u get the phone with Gingerbread as stock rom? Try downgrading to an Eclair (2.1) ROM with Odin.
hello again peoples,
I'm very grateful for all your assistance but i just wasn't paying attention when i was putting my SIM card into my phone and put it in the wrong way round...!
i mean what happened to SIM card slots where sim cards only fit in one way...!
again thanks alot for all your assistance also i've ended up upgrading to Insanity 2.3.5
Thank s
I am deployed to Afghanistan right now. I ordered a brand new XT862, rooted it, and installed safestrap 2.10 and cm-9-20120815-UNOFFICIAL-solana.zip. That worked beautifully.
Unfortunately I am having problems getting the radio to work. I would set an APN but then sometimes it would just not appear in the list. I would set it again and again, then sometimes all of the APNs would appear in my list until the radio failed. After flashing, formatting, and reflashing several times and having the default Verizion access points finally pop up out of nowhere in my APN list, I realized I never "unlocked" the phone. I am using a Roshan SIM.
The weird part is the radio would work for a period of time. First for several hours, then it would start failing more and more frequently.
I found the XT862-5.7.906-SAFE and flashed it, hoping it would ask me for an unlock code upon booting, but no dice. It just went into "Global" mode. I am testing right now to see if the radio stays stable.
So, I am wondering if these instructions:
Guide - Unlock XT862 for T-mobile/ATT
http://forum.xda-developers.com/showthread.php?t=1406812
will get me to the unlock code screen, and once unlocked, will my radio problem disappear when I reflash CM9? My Internet connection is painfully slow here in Afghanistan so I only want to download what I know will work.
I do have a second XT862 that I had unlocked, then rooted and flashed CM9 to and it is working very well on Roshan out here.
Thanks for your help!
While running the XT862-5.7.906-SAFE, the radio cut out and I got a BP paniced message. I couldn't remember all of it before it crashed completely, but it asked to connect the USB for debugging. While the screen was flickering, a window popped up asking if I wanted to switch to GSM.
The radio doesn't seem to be stable even with this firmware.
Any suggestions or help would be greatly appreciated.
The radio cut out again, so I tried switching it from global to CDMA and then to GSM to see if I could get it to reset.
It told me there were no GSM networks available, and then asked to switch to Global.
I hit ok, then it told me that the SIM was invalid...
I'm a noob to this phone stuff, but this just seems crazy.
It seems it's definately the phone, because I swapped the SIMs in my two phones and the problems persist with the new one. My functioning phone continues to work fine on the chip designated for the problem phone.
Did you flash the 883 radio?
MrObvious said:
Did you flash the 883 radio?
Click to expand...
Click to collapse
No, I haven't yet because I didn't know if that was going to solve my problem or not. Downloading is a challenge for me right now, too.
I don't know if not unlocking the phone before flashing CM9 caused the problem or if it's something else entirely that I am missing. I will want to have the phone usable in the states again. Will flashing the 883 radio give me any difficulties there?
I've went back though the steps that I did on my other, working phone and [edit] not unlocking is [/edit] pretty much the only difference.
I'm probably going to try to download the 883 radio stuff tonight when I get home from work and give it a try.
ThunderZuk said:
No, I haven't yet because I didn't know if that was going to solve my problem or not. Downloading is a challenge for me right now, too.
I don't know if not unlocking the phone before flashing CM9 caused the problem or if it's something else entirely that I am missing. I will want to have the phone usable in the states again. Will flashing the 883 radio give me any difficulties there?
I've went back though the steps that I did on my other, working phone and [edit] not unlocking is [/edit] pretty much the only difference.
I'm probably going to try to download the 883 radio stuff tonight when I get home from work and give it a try.
Click to expand...
Click to collapse
Unlocking the phone MUST be done on stock firmware. The XT883 radio is only required for using US GSM networks, such as AT&T and T-Mobile. The stock XT862 radio (after unlock) supports foreign SIM cards (and of course Verizon's Vodafone SIM).
As I recall, CM9/10 normally has issues with the GSM radio, if you need your phone, I suggest flashing a ROM based on a stock GB system, such as Maverick (4.0 version, 4.5 has a battery drain issue with an overclock script) which is based on 906. I tend to keep the phone on GSM/UMTS mode, as "Global" also turns on the CDMA radio, which utilizes more battery. The APN only matters for Data/MMS without the proper APN, you should still get talk/text/signal (no EDGE or 3G icons, which indicate data connection).
Skreelink said:
Unlocking the phone MUST be done on stock firmware. The XT883 radio is only required for using US GSM networks, such as AT&T and T-Mobile. The stock XT862 radio (after unlock) supports foreign SIM cards (and of course Verizon's Vodafone SIM).
As I recall, CM9/10 normally has issues with the GSM radio, if you need your phone, I suggest flashing a ROM based on a stock GB system, such as Maverick (4.0 version, 4.5 has a battery drain issue with an overclock script) which is based on 906. I tend to keep the phone on GSM/UMTS mode, as "Global" also turns on the CDMA radio, which utilizes more battery. The APN only matters for Data/MMS without the proper APN, you should still get talk/text/signal (no EDGE or 3G icons, which indicate data connection).
Click to expand...
Click to collapse
I didn't update the radio on my working phone to 883. It has been doing just fine on Roshan Afghanistan and AIS in Thailand. In the states I use Verizon, so I don't think GSM is a biggie.
So, I have to get back to stock and unlock, then go through the hack process again. I figured I probably did. So before I try to download this file, do you think the 1-click SBF here:
[xt862] .906 1-click-sbf.exe + tools [10-8-2012]
http://forum.xda-developers.com/showthread.php?t=1686911
will do the job? If not, do you know what will? I'm still running XT862-5.7.906-SAFE. I do have Blur_Version.5.6.890.XT862.Verizon.en.US.zip but I don't know how to install it. I'm still learning all of this stuff. Would RSDLite do it?
I wasn't very specific when I talked about the radio, sorry. More or less the voice connection would stop along with the data. It was just weird that sometimes the APNs would show up in the list and sometimes they wouldn't. When they did, it showed multiple from when I tried entering them several times. I don't know why it would write the changes but not read the list.
When about five Verizon APNs showed up and none of my Afghan APNs showed up, I realized I must have needed to unlock the phone. When I hacked it I just assumed it wouldn't have to be unlocked. I figured I WAS unlocking it. LOL!
Thanks everyone for your help.
ThunderZuk said:
I didn't update the radio on my working phone to 883. It has been doing just fine on Roshan Afghanistan and AIS in Thailand. In the states I use Verizon, so I don't think GSM is a biggie.
So, I have to get back to stock and unlock, then go through the hack process again. I figured I probably did. So before I try to download this file, do you think the 1-click SBF here:
[xt862] .906 1-click-sbf.exe + tools [10-8-2012]
http://forum.xda-developers.com/showthread.php?t=1686911
will do the job? If not, do you know what will? I'm still running XT862-5.7.906-SAFE. I do have Blur_Version.5.6.890.XT862.Verizon.en.US.zip but I don't know how to install it. I'm still learning all of this stuff. Would RSDLite do it?
I wasn't very specific when I talked about the radio, sorry. More or less the voice connection would stop along with the data. It was just weird that sometimes the APNs would show up in the list and sometimes they wouldn't. When they did, it showed multiple from when I tried entering them several times. I don't know why it would write the changes but not read the list.
When about five Verizon APNs showed up and none of my Afghan APNs showed up, I realized I must have needed to unlock the phone. When I hacked it I just assumed it wouldn't have to be unlocked. I figured I WAS unlocking it. LOL!
Thanks everyone for your help.
Click to expand...
Click to collapse
If you were on the 906 OTA, the one click EXE would work, no programs required. Connect phone in bootloader > run the exe > The phone will flash. In Global mode, when you check the APNs, only the Verizon ones will show, you MUST be in GSM/UMTS mode for your own APNs to show up. Also, if it's occasionally in and out, I wonder if the connection between the SIM and phone are bad, like a shake or movement will break the contact. (Which when a SIM is not present, only the Verizon APNs will show as well and would prompt for global mode)
Try taking the SIM out, cleaning the contacts, and placing it back in. If the sim seems loose, try slipping a single thin piece of paper behind it to make sure it's getting full contact. Otherwise, it might be a hardware fault.
Skreelink said:
If you were on the 906 OTA, the one click EXE would work, no programs required. Connect phone in bootloader > run the exe > The phone will flash. In Global mode, when you check the APNs, only the Verizon ones will show, you MUST be in GSM/UMTS mode for your own APNs to show up. Also, if it's occasionally in and out, I wonder if the connection between the SIM and phone are bad, like a shake or movement will break the contact. (Which when a SIM is not present, only the Verizon APNs will show as well and would prompt for global mode)
Try taking the SIM out, cleaning the contacts, and placing it back in. If the sim seems loose, try slipping a single thin piece of paper behind it to make sure it's getting full contact. Otherwise, it might be a hardware fault.
Click to expand...
Click to collapse
I'm currently running the SAFE version found here:
XT862 5.7.906 Update FXZ DST
http://forum.xda-developers.com/showthread.php?t=1554916
It doesn't say that it's an OTA. I'm still running safestrap 2.10 with it. That's why I was curious if that might work. I also have that full BLUR download already. I tried installing it using safestrap, but that didn't work. I'm assuming because it's not supposed to. If I can get that installed and it works I'd be happy. I have to remote into my server at home, download there, and then FTP over here at like 6k/sec. Am I correct in assuming I'd install that full BLUR image with RSDLite?
I haven't had any issues with the SIM from the bad phone in my good phone, and everything feels tight when I put the SIM in. I've tried cleaning the contacts a bit. I haven't tried putting something in there to hold it tighter yet, though.
ThunderZuk said:
I'm currently running the SAFE version found here:
XT862 5.7.906 Update FXZ DST
http://forum.xda-developers.com/showthread.php?t=1554916
It doesn't say that it's an OTA. I'm still running safestrap 2.10 with it. That's why I was curious if that might work. I also have that full BLUR download already. I tried installing it using safestrap, but that didn't work. I'm assuming because it's not supposed to. If I can get that installed and it works I'd be happy. I have to remote into my server at home, download there, and then FTP over here at like 6k/sec. Am I correct in assuming I'd install that full BLUR image with RSDLite?
I haven't had any issues with the SIM from the bad phone in my good phone, and everything feels tight when I put the SIM in. I've tried cleaning the contacts a bit. I haven't tried putting something in there to hold it tighter yet, though.
Click to expand...
Click to collapse
The Droid 3 does not require RSDLite, as it has fastboot. Which is able to flash certain parts alone instead of the whole system (or the whole thing together) it's easier than RSDLite and can make modifications without losing everything. That's how the XT883 radio is flashed without modifying the system.
The one click method would fully flash it as if you used an SBF in RSDLite. If you have safestrap enabled on safe; make a full backup with recovery, then disable safe-mode. You'll then reboot into your stock system, unlock there, then enable the safe boot again, restore your backup.
SIM unlocking is for good, no amount of flashing, updating, etc will revert it. If the phone DOES get service with the sim, then it's already unlocked.. if it's occasionally cutting out, that's a different issue.
ThunderZuk said:
I'm currently running the SAFE version found here:
XT862 5.7.906 Update FXZ DST
http://forum.xda-developers.com/showthread.php?t=1554916
It doesn't say that it's an OTA. I'm still running safestrap 2.10 with it. That's why I was curious if that might work. I also have that full BLUR download already. I tried installing it using safestrap, but that didn't work. I'm assuming because it's not supposed to. If I can get that installed and it works I'd be happy. I have to remote into my server at home, download there, and then FTP over here at like 6k/sec. Am I correct in assuming I'd install that full BLUR image with RSDLite?
I haven't had any issues with the SIM from the bad phone in my good phone, and everything feels tight when I put the SIM in. I've tried cleaning the contacts a bit. I haven't tried putting something in there to hold it tighter yet, though.
Click to expand...
Click to collapse
Holy shinto! I didn't know it saved that! I figured it was gone!
So I disabled safestrap, then it kept telling me com.android.phone had stopped. I'd force close and it would say it again. I went back into safestrap, did a factory wipe, rebooted and now it is connected in "Global" mode again on the stock 5.6.890.XT862.Verizon.en.US. It was looking good for a while, until the phone just rebooted itself.
I put my other SIM in the phone, booted back up and it worked for a while until the signal dropped and the phone gave me an invalid SIM error again. So, it's given me an invalid SIM on two different SIMs now in stock and flashed ROMs.
The SIM is in there tight. I couldn't get a piece of paper in there. I cleaned the contacts again, but they don't look dirty at all.
I put the original SIM back in there, it booted up, never got signal, and rebooted itself again. It doesn't have signal now, and I assume it's just about to reboot itself again.
You think I got a bum phone? I didn't test it at all before I started hacking it.
Also, if I do the *#*#4636#*#* while it has no signal it tells me my IMEI number is unknown, if that helps. If press the turn off radio button, it does nothing.
[edit]It also tells me pretty much everything (MEID, IMEI SV, SIM ID, ect...) is unknown if I go into About Phone>Status[/edit]
ThunderZuk said:
Also, if I do the *#*#4636#*#* while it has no signal it tells me my IMEI number is unknown, if that helps. If press the turn off radio button, it does nothing.
[edit]It also tells me pretty much everything (MEID, IMEI SV, SIM ID, ect...) is unknown if I go into About Phone>Status[/edit]
Click to expand...
Click to collapse
That happens if either; Airplane mode is on, or you have an incorrect build.prop, have you modified it in any way? Also have you tried making a backup and turning safe boot off?
Also; If the zips are still on your SDCard, try reflashing your rom to make sure you have the correct build.prop.
Skreelink said:
That happens if either; Airplane mode is on, or you have an incorrect build.prop, have you modified it in any way? Also have you tried making a backup and turning safe boot off?
Also; If the zips are still on your SDCard, try reflashing your rom to make sure you have the correct build.prop.
Click to expand...
Click to collapse
I have safestrap turned off and it appears I am running on stock? It says I am running 5.7.890 and not 5.7.906. There is a Superuser icon in the all apps, but I think that is from where I rooted it.
I rebooted and all the numbers came back... for now.
I don't have airplane mode on. I tried to turn it on after reading your post. It caused the phone to reboot. Once rebooted, it came back up in airplane mode. I turned it off and it is connected again, for now.
I haven't messed with the build.prop that I know of. I only rooted, installed CM9 several times, formatted everything several times in-between those installs, and most recently flashed that XT862-5.7.906-SAFE.zip.
And before I even finished this post it rebooted itself on me again...
ThunderZuk said:
I have safestrap turned off and it appears I am running on stock? It says I am running 5.7.890 and not 5.7.906. There is a Superuser icon in the all apps, but I think that is from where I rooted it.
I rebooted and all the numbers came back... for now.
I don't have airplane mode on. I tried to turn it on after reading your post. It caused the phone to reboot. Once rebooted, it came back up in airplane mode. I turned it off and it is connected again, for now.
I haven't messed with the build.prop that I know of. I only rooted, installed CM9 several times, formatted everything several times in-between those installs, and most recently flashed that XT862-5.7.906-SAFE.zip.
And before I even finished this post it rebooted itself on me again...
Click to expand...
Click to collapse
Alright, did you put the sim in and get the unlock screen to put in the unlock code? 890 is alright to be on, that's what my stock system is. I would suggest staying away from CM9/CM10 as they are unstable when using GSM networks. Either stay stock or flash a ROM based on Blur (I suggest MavRom 4.0).
Skreelink said:
Alright, did you put the sim in and get the unlock screen to put in the unlock code? 890 is alright to be on, that's what my stock system is. I would suggest staying away from CM9/CM10 as they are unstable when using GSM networks. Either stay stock or flash a ROM based on Blur (I suggest MavRom 4.0).
Click to expand...
Click to collapse
It never asked me for an unlock. It just immediately put the phone in world mode.
I literally did this with the phone.
1. open factory sealed box
2. root the phone
3. install safestrap
4. format all partitions
5. install CM9
6. install SIM
7. repeat 4 and 5 serveral times
8. install 5.7.906 hoping to get an unlock screen in order to possibly fix radio issue
9. start this thread.
Now, I did steps 4 and 5 over and over again over about 2 weeks off and on while I tried to figure out what was going wrong. Like I said, I am running CM9 very successfully here since August on a different XT862 that I did unlock before rooting. I installed a KANG build, not a KEXEC.
The amount of times your device seems to be rebooting makes me think there is something wrong with it.
Sent from my XT860 using xda premium
ThunderZuk said:
It never asked me for an unlock. It just immediately put the phone in world mode.
I literally did this with the phone.
1. open factory sealed box
2. root the phone
3. install safestrap
4. format all partitions
5. install CM9
6. install SIM
7. repeat 4 and 5 serveral times
8. install 5.7.906 hoping to get an unlock screen in order to possibly fix radio issue
9. start this thread.
Now, I did steps 4 and 5 over and over again over about 2 weeks off and on while I tried to figure out what was going wrong. Like I said, I am running CM9 very successfully here since August on a different XT862 that I did unlock before rooting. I installed a KANG build, not a KEXEC.
Click to expand...
Click to collapse
Hm... while in unsafe (stock) the unlock screen should have come up. It will not on other roms, as for global mode, that is a default setting, without unlock, will only work with the verizon vodafone sim that came with the phone. Reboots can be either hardware, rom, or app problem. You can try a factory wipe and see if that helps the reboots. Trying to find solutions without you having to download more.
Endoroid said:
The amount of times your device seems to be rebooting makes me think there is something wrong with it.
Sent from my XT860 using xda premium
Click to expand...
Click to collapse
I was kind of worried that was the case. I just ordered a refurb unit just in case.
Hello,
I have a Samsung Galaxy Ace S5830 for 3 years now. I flashed different roms and did root my phone in all these years. But... now i received a new sim card which works well in other phones but NOT in my ace. So that must be a problem with my ace.. I just flashed back to the stock rom (XEN - Netherlands S5830XENKS1) via ODIN but the problem is still there, i can't use my sim-card: "Emergency only".
I already wiped data and cleared cache, hard reset... nothing works. What could i try to have my phone back working with sim card so i can call, sms and use my dataplan. My phone have no simlock i checked and the IMEI is also the right. The one shown by #06# is the same as printed behind my battery. I also received a new sim card from my provider, but this one also has the same problem.
I hope you guys can help me out! :good::good::good:
UPDATE 1: I tried differend sim cards in the phone. I always used to have T-Mobile as provider. All other simcards are not working, theyre showing up for a few seconds and after that it says: Emergency calls only. When i put in a T-Mobile sim card the provider keeps displayed, so it looks like my phone only works with a t-mobile card. But it's not sim locked, because i also used differend sim cards before..
UPDATE 2: Now my simyo simcard also connects and i can sms, call and internet. But after a few seconds/minutes again the message: Emergency calls only
WHAT COULD THIS PROBLEM BE??!!??! Strange.............. I really hope someone can help me out this
Soldaatt said:
Hello,
I have a Samsung Galaxy Ace S5830 for 3 years now. I flashed different roms and did root my phone in all these years. But... now i received a new sim card which works well in other phones but NOT in my ace. So that must be a problem with my ace.. I just flashed back to the stock rom (XEN - Netherlands S5830XENKS1) via ODIN but the problem is still there, i can't use my sim-card: "Emergency only".
I already wiped data and cleared cache, hard reset... nothing works. What could i try to have my phone back working with sim card so i can call, sms and use my dataplan. My phone have no simlock i checked and the IMEI is also the right. The one shown by #06# is the same as printed behind my battery. I also received a new sim card from my provider, but this one also has the same problem.
I hope you guys can help me out! :good::good::good:
UPDATE 1: I tried differend sim cards in the phone. I always used to have T-Mobile as provider. All other simcards are not working, theyre showing up for a few seconds and after that it says: Emergency calls only. When i put in a T-Mobile sim card the provider keeps displayed, so it looks like my phone only works with a t-mobile card. But it's not sim locked, because i also used differend sim cards before..
UPDATE 2: Now my simyo simcard also connects and i can sms, call and internet. But after a few seconds/minutes again the message: Emergency calls only
WHAT COULD THIS PROBLEM BE??!!??! Strange.............. I really hope someone can help me out this
Click to expand...
Click to collapse
I think your device has a problem to make contact with sims cards, so your device have a trouble accessing read and use sim cards... You can send your device to the support service, to check or try to fix it...Have your warranty still in effect?
Viper The Ripper said:
I think your device has a problem to make contact with sims cards, so your device have a trouble accessing read and use sim cards... You can send your device to the support service, to check or try to fix it...Have your warranty still in effect?
Click to expand...
Click to collapse
Hello, thanks for your reply! No, my warranty is not active anymore. My phone is 3 years old. Today i went to another city and could call and sms the whole day. No internet. When i came home, i received again the message: emergency only. How strange.. I also could'nt find a good rom or firmware to flash back my phone to the full original software and firmware... Can someone help me on that? I need the newest firmware for the samsung galaxy ace s5830, netherlands version. Or maybe a custom rom which is the most used and stable version. I would like to exclude software reasons, so it might be a hardware problem. But i think it's a software fault cause of the different roms i tried on the phone.
Soldaatt said:
Hello, thanks for your reply! No, my warranty is not active anymore. My phone is 3 years old. Today i went to another city and could call and sms the whole day. No internet. When i came home, i received again the message: emergency only. How strange.. I also could'nt find a good rom or firmware to flash back my phone to the full original software and firmware... Can someone help me on that? I need the newest firmware for the samsung galaxy ace s5830, netherlands version. Or maybe a custom rom which is the most used and stable version. I would like to exclude software reasons, so it might be a hardware problem. But i think it's a software fault cause of the different roms i tried on the phone.
Click to expand...
Click to collapse
It's very strange.. here it is Netherland's fws, try flashing your device if you want, but I've never heard that strange problem xD
http://www.sammobile.com/firmwares/1/?model=GT-S5830&pcode=XEN#firmware
Always when you'll change your custom rom do the 3 wipes to leave your device as clean as possible
Thanks for your fast reply! I did this firmware already yesterday and also wiped dat and cache + recovery... The problem keops showing up I will try this same firmware again and let you know if there are changes or not.
Viper The Ripper said:
It's very strange.. here it is Netherland's fws, try flashing your device if you want, but I've never heard that strange problem xD
http://www.sammobile.com/firmwares/1/?model=GT-S5830&pcode=XEN#firmware
Always when you'll change your custom rom do the 3 wipes to leave your device as clean as possible
Click to expand...
Click to collapse
Soldaatt said:
Thanks for your fast reply! I did this firmware already yesterday and also wiped dat and cache + recovery... The problem keops showing up I will try this same firmware again and let you know if there are changes or not.
Click to expand...
Click to collapse
You can also flash whatever fw you want from EUROPE, because your device is unlocked in order to check your sim's trouble
Viper The Ripper said:
You can also flash whatever fw you want from EUROPE, because your device is unlocked in order to check your sim's trouble
Click to expand...
Click to collapse
Again flashed the original firmware to my Ace. Wiped data and cleared cache. Everything works..... Except... the simcard. Can't call, can't sms and can't make an internet connection. So, still the same problem. The sim works well in another phone, and another simcard in the Ace gives also "Emergency call only". So it HAS to be something with my phone. Someone any idea's i can try / check now i'm very sure it's a phone problem with original new flashed firmware? I hope it's not an hardware defect......... how can i check?
UPDATE: The only simcard which works well is a T-Mobile prepaid simcard. All other simcards sometimes shows up, but most of the time not. The more strange fact is today: I went to another city and was able to call and sms the whole day. But no internet. When i came home, i received again the message: emergency only. This is so strange and makes me very sad. The phone is simlockfree, WHAT COULD IT BE So strange............
Tomorrow i had internet connection, could call and sms. My provider was shown on the screen and nothing wrong. But unfortunately just for a few minutes... No stable connection.
Someone any idea? :crying:
I too faced this problem once.....What I did is that I just formatted the system , wiped data , cache , sd ext and dalvik cache and then restored a backup of my earlier ROM in which the Sim was working ! And it was fixed....
Sent from my GT-P3100 using xda premium
Thanks for your reply! I did your trick but unfortunately... It did'nt help. Very interesting thing is, while i'm traveling around there is no problem, but as soon as i stop driving and walk around, the problems are back. Someone any idea on this strange problem? :crying:
cant access sim
until now this is problem...
why they cant fix this important setting
better to back to stock rom.
is does all are working
yeah CM's are good but still
many bugs and error
like this one.
not STK, sim contact save
and show in contact app
i hope they fix this one asap
You dont have any choice other than visiting the service centre. Yes they may charge you a good amount but seems none of the methods are working.
Also try contacting your service provider maybe thay know the exact reason.
Sent from my GT-S5830 using xda app-developers app
I don't know if any one of you have encountered this before but here's what happened
I installed a new rom and my network lock came back
so I installed galaxys_unlock + busy box to unlock my phone again.
the phone gets unlocked and signal does seemingly work.
now here's the problem.
my sim card + plan can go on internet. but for some reason when I try to go on the internet it doesn't work.
I clicked on mobile network on my phone and what shows up was this message of "insert SIM card to access network service"
which really confuses me because I can actually make phone calls.
If anyone has any solutions please let me know. I'll be more than happy to try it.
Is it even normal for my n7000 to lag so much and have so many problems? I feel like I spend more time trying to fix it than actually enjoying it.
1 Try restock to see if problem from rom side or hardware
2 Reinstall new rom, make sure file downloaded match md5 (might be corrupt dl) and follow instructions
3 Update latest proven stable kernel for that rom
4 If else fail try diff rom or restock
Good luck
asian_boi said:
I don't know if any one of you have encountered this before but here's what happened
I installed a new rom and my network lock came back
so I installed galaxys_unlock + busy box to unlock my phone again.
the phone gets unlocked and signal does seemingly work.
now here's the problem.
my sim card + plan can go on internet. but for some reason when I try to go on the internet it doesn't work.
I clicked on mobile network on my phone and what shows up was this message of "insert SIM card to access network service"
which really confuses me because I can actually make phone calls.
If anyone has any solutions please let me know. I'll be more than happy to try it.
Is it even normal for my n7000 to lag so much and have so many problems? I feel like I spend more time trying to fix it than actually enjoying it.
Click to expand...
Click to collapse
bogardanxda said:
1 Try restock to see if problem from rom side or hardware
2 Reinstall new rom, make sure file downloaded match md5 (might be corrupt dl) and follow instructions
3 Update latest proven stable kernel for that rom
4 If else fail try diff rom or restock
Good luck
Click to expand...
Click to collapse
What does restocking mean???
Restock = basically back to original official stock firmware of the rom (non moded ics/jb based).
Also good idea to state your rom that you use, carrier etc, hopefully other user of that same rom can guide you?
I think you need to put the settings for internet access back in
sent by reversed alien technology....
asian_boi said:
I don't know if any one of you have encountered this before but here's what happened
I installed a new rom and my network lock came back
so I installed galaxys_unlock + busy box to unlock my phone again.
the phone gets unlocked and signal does seemingly work.
now here's the problem.
my sim card + plan can go on internet. but for some reason when I try to go on the internet it doesn't work.
I clicked on mobile network on my phone and what shows up was this message of "insert SIM card to access network service"
which really confuses me because I can actually make phone calls.
If anyone has any solutions please let me know. I'll be more than happy to try it.
Is it even normal for my n7000 to lag so much and have so many problems? I feel like I spend more time trying to fix it than actually enjoying it.
Click to expand...
Click to collapse
Lag is equal samsung even on galaxy s4
Flash stock rom and stock kernel
Then go to CM10.1
Sent via my Sony Xperia Z | C6602