Database Develop

Sim Unlock Guide

Here You Go
http://forum.xda-developers.com/showthread.php?p=34895847#post34895847

It does work
Tnanx
Sent from my HTC Desire C using xda app-developers app

stoshke said:
It does work
Tnanx
Sent from my HTC Desire C using xda app-developers app
Click to expand...
Click to collapse
no problem Out of interest , which method did you use?

I used both of them, and i got same unlock pin code in either case. I think that second one (one with pushing .sh file) is a little bit easier to read. Greetings, and thank you once again.
Sent from my HTC Desire C using xda app-developers app

I used both methods also and got same code. now if there was a way to unlock the device once and not have to unlock everytime a sim is changed that would be awesome.

SolarCyborg said:
I used both methods also and got same code. now if there was a way to unlock the device once and not have to unlock everytime a sim is changed that would be awesome.
Click to expand...
Click to collapse
Solar... one you input a simunlock code it should permanently enable any sim to be used?
That tested on mine, i have 4 different sims with other providers and they all worked and after seeing this they still do

fkofilee said:
Here You Go
http://forum.xda-developers.com/showthread.php?p=34895847#post34895847
Click to expand...
Click to collapse
I tried to follow the instructions however I never got the unlock code or I am just being dumb when I use method 2 my results are identical to your 2nd screenshot,
there is no 3rd line of text?
Using the first option what I see is very similar to your first screenshot with Vodafone instead of O2. But again no code that I can see.
I have tried inserting simcards from t-mobile and O2 however I never get asked to enter a code. Not that I have a code to enter, I wish I could work out where I am going wrong.

Tartanarmy1967 said:
I tried to follow the instructions however I never got the unlock code or I am just being dumb when I use method 2 my results are identical to your 2nd screenshot,
there is no 3rd line of text?
Using the first option what I see is very similar to your first screenshot with Vodafone instead of O2. But again no code that I can see.
I have tried inserting simcards from t-mobile and O2 however I never get asked to enter a code. Not that I have a code to enter, I wish I could work out where I am going wrong.
Click to expand...
Click to collapse
IF you dont get asked for a code to put in when putting in other sim cards , should be unlocked... where did you get it from?

fkofilee said:
IF you dont get asked for a code to put in when putting in other sim cards , should be unlocked... where did you get it from?
Click to expand...
Click to collapse
The phone is a friends who got it from someone it was on vodafone rru and had the branding on startup and shut down, before I rooted it and put on CWM and Nameless Rom, but when I try my t-mobile sim card it doesn't get a signal for when, unfortunately I do not know if this was an issue as it wasn't supplied to me with a sim card.
I will contact my friend and see if he can supply me his sim card so I can test it. Hopefully as you say it is unlocked. Not sure when i will get the sim card to be able to test it though.

fkofilee said:
Solar... one you input a simunlock code it should permanently enable any sim to be used?
That tested on mine, i have 4 different sims with other providers and they all worked and after seeing this they still do
Click to expand...
Click to collapse
strange it asks me for the code i put it in it says success and i can use the simcard. then when I go back home i put in my original carriers sim no pin asked for then when i go out of country again and insert int sim it asks for pin again i imput it and all is good.

SolarCyborg said:
strange it asks me for the code i put it in it says success and i can use the simcard. then when I go back home i put in my original carriers sim no pin asked for then when i go out of country again and insert int sim it asks for pin again i imput it and all is good.
Click to expand...
Click to collapse
Hmm how strange... are you running custom Firmware? ... i wonder if it does have something to do with the country's sim you were using
Tartanarmy1967 said:
The phone is a friends who got it from someone it was on vodafone rru and had the branding on startup and shut down, before I rooted it and put on CWM and Nameless Rom, but when I try my t-mobile sim card it doesn't get a signal for when, unfortunately I do not know if this was an issue as it wasn't supplied to me with a sim card.
I will contact my friend and see if he can supply me his sim card so I can test it. Hopefully as you say it is unlocked. Not sure when i will get the sim card to be able to test it though.
Click to expand...
Click to collapse
hmmm when you say doesnt get signal.... i wonder if its because its a vodafone branded desire C... it will have everything for Voda hard wired in the device... and wont have any t-mo APNs etc. TMo arent exactly friendly when it comes to APN info unlike other providors like O2 & Voda
I wonder if that is the issue is that no data APNs are selected....

fkofilee said:
Hmm how strange... are you running custom Firmware? ... i wonder if it does have something to do with the country's sim you were using not sure. I am flashing a custom Rom now to see it. It is original carriers bloatware causing the problem.
hmmm when you say doesnt get signal.... i wonder if its because its a vodafone branded desire C... it will have everything for Voda hard wired in the device... and wont have any t-mo APNs etc. TMo arent exactly friendly when it comes to APN info unlike other providors like O2 & Voda
I wonder if that is the issue is that no data APNs are selected....
Click to expand...
Click to collapse
Sent from my HTC Desire C using xda app-developers app

SolarCyborg said:
Sent from my HTC Desire C using xda app-developers app
Click to expand...
Click to collapse
Blank message?

can someone explain the guide more specifically, im a newbie and cant really understand the guide. Im newbie in the htc phones, not at all... i stuck at the sh thing, cant get it working. i have all the files, sdk, java, htc drivers, adb founds the phone, but when i type the "adb shell" thing, the path changes to [email protected] (or something like that) and im not getting the sh-3.2 line, and i cant continue the procedure. also where is that simunlock.txt file mentioned in the op? i couldnt find it.

fkofilee said:
Here You Go
http://forum.xda-developers.com/showthread.php?p=34895847#post34895847
Click to expand...
Click to collapse
Cant get this to work!!
What is BusyBox that i need to install? On the phone ? On the PC?

danhock said:
Cant get this to work!!
What is BusyBox that i need to install? On the phone ? On the PC?
Click to expand...
Click to collapse
Hmm, Do you have a Custom Sense Rom installed?

fkofilee said:
Hmm, Do you have a Custom Sense Rom installed?
Click to expand...
Click to collapse
its a standard phone....
I just want to unlock the carrier? Do i need to pay for this then...
---------- Post added at 04:35 PM ---------- Previous post was at 04:11 PM ----------
deffecto said:
can someone explain the guide more specifically, im a newbie and cant really understand the guide. Im newbie in the htc phones, not at all... i stuck at the sh thing, cant get it working. i have all the files, sdk, java, htc drivers, adb founds the phone, but when i type the "adb shell" thing, the path changes to [email protected] (or something like that) and im not getting the sh-3.2 line, and i cant continue the procedure. also where is that simunlock.txt file mentioned in the op? i couldnt find it.
Click to expand...
Click to collapse
exact same thing i am seeing... Did you get what they mean by busybox??

danhock said:
its a standard phone....
I just want to unlock the carrier? Do i need to pay for this then...
---------- Post added at 04:35 PM ---------- Previous post was at 04:11 PM ----------
exact same thing i am seeing... Did you get what they mean by busybox??
Click to expand...
Click to collapse
If you want to get your unlock code, you need to flash a Custom Rom, NAmeless For Example.
Once thats been done, you can install busybox and follow the instructions and you get your code.

i managed to succesfully unlock my Desire C
its a stock phone, bought it from Asda UK - on T-Mobile network
although it doesent have any t-mobile branding or carrier apps or boot up logo like most phones have
after unlocking my bootloader and using r1-superuser Root, it went very smooth
but one thing i did notice that seems odd, my IMEI is different in the command shell
to what is displayed in the phone
xxxxxxxxx584298 - displayed from phone
xxxxxxxxx5842901 - displayed on the command shell

racky29 said:
i managed to succesfully unlock my Desire C
its a stock phone, bought it from Asda UK - on T-Mobile network
although it doesent have any t-mobile branding or carrier apps or boot up logo like most phones have
after unlocking my bootloader and using r1-superuser Root, it went very smooth
but one thing i did notice that seems odd, my IMEI is different in the command shell
to what is displayed in the phone
xxxxxxxxx584298 - displayed from phone
xxxxxxxxx5842901 - displayed on the command shell
Click to expand...
Click to collapse
how many digits does the IMEI show overall in the cmd shell?

[Q] Need help in getting stock rom installed for Nokia Lumia 520

Hello,
I have a Nokia Lumia 520 ATT gophone. I had to unlocked and using it with Bell in Canada. Everything is fine except for tethering.
After going through forums, I realized the phone needs to be unbranded as well. I have downloaded Rogers ROM and Tried using Nokia Care suite to recover.
But haven't been successful. I keep getting message 'recovery failed'
Is there a way to get stock rom for the lumia 520 and do a clean install?
Appreciate your help.
Big fan of XDA!

I think you need to use either NSU to do a dead phone flash or WPHelper to do a flash.
I would use a generic ROM rather than carrier specific ones. Yes, generic doesn't have amber update, but it will come at the end of the month.
Sent from my Nexus 4

killer23d said:
I think you need to use either NSU to do a dead phone flash or WPHelper to do a flash.
I would use a generic ROM rather than carrier specific ones. Yes, generic doesn't have amber update, but it will come at the end of the month.
Sent from my Nexus 4
Click to expand...
Click to collapse
Hi, What is WPHelper? and where can I find generic ROM for Nokia 520?
Thanks for your help.

Finally able to get flashing work!
Thanks for the help. I was able to flash in dead phone mode. Tried Rogers ROM, but had challenges with tethering.
After few other ROMs, I have tried
059S2D1 RM-915 LIGHT SWAP ENG GLOBAL
This one worked like a charm! doesn't seem to be tied to any carrier. Not sure if this is the stock though.
Tethering also works.
Here are few links that were useful
To find the ROM you need
http://forum.gsmhosting.com/vbb/f60...download-nokia-515-added-1660094/#post9435252
Nokia care suite
http://www.softpedia.com/get/Mobile-Phone-Tools/Nokia/Nokia-Care-Suite.shtml
http://forum.gsmhosting.com/vbb/f29...a-package-manager-download-firmwares-1659582/
Steps that worked for me
1. Download the firmware
2. Open Product ex: RM-915
3. In Nokia Suite
Programming
Select the firmware package
turn off the phone
put the connection - no connection mode
on screen you should message to
hold power and volume lower button
when you get a buzz, hit the retry button.

pwcsap said:
Hi, What is WPHelper? and where can I find generic ROM for Nokia 520?
Thanks for your help.
Click to expand...
Click to collapse
That is a Chinese made program for the Wper forum. It allows you to download ROM and cross flash.
Sent from my Nexus 4
---------- Post added at 11:42 AM ---------- Previous post was at 11:39 AM ----------
pwcsap said:
Thanks for the help. I was able to flash in dead phone mode. Tried Rogers ROM, but had challenges with tethering.
After few other ROMs, I have tried
059S2D1 RM-915 LIGHT SWAP ENG GLOBAL
This one worked like a charm! doesn't seem to be tied to any carrier. Not sure if this is the stock though.
Tethering also works.
Here are few links that were useful
To find the ROM you need
http://forum.gsmhosting.com/vbb/f60...download-nokia-515-added-1660094/#post9435252
Nokia care suite
http://www.softpedia.com/get/Mobile-Phone-Tools/Nokia/Nokia-Care-Suite.shtml
http://forum.gsmhosting.com/vbb/f29...a-package-manager-download-firmwares-1659582/
Steps that worked for me
1. Download the firmware
2. Open Product ex: RM-915
3. In Nokia Suite
Programming
Select the firmware package
turn off the phone
put the connection - no connection mode
on screen you should message to
hold power and volume lower button
when you get a buzz, hit the retry button.
Click to expand...
Click to collapse
Anything that says SWAP is a generic ROM came with a new motherboard. It has a basic set of software. The tech is suppose to change the product code after to make sure it matches the original code.
I am using a swap firmware as well for my 521 and am wondering if I will get Amber update.
Sent from my Nexus 4

pwcsap said:
Thanks for the help. I was able to flash in dead phone mode. Tried Rogers ROM, but had challenges with tethering.
After few other ROMs, I have tried
059S2D1 RM-915 LIGHT SWAP ENG GLOBAL
This one worked like a charm! doesn't seem to be tied to any carrier. Not sure if this is the stock though.
Tethering also works.
Here are few links that were useful
To find the ROM you need
http://forum.gsmhosting.com/vbb/f60...download-nokia-515-added-1660094/#post9435252
Nokia care suite
http://www.softpedia.com/get/Mobile-Phone-Tools/Nokia/Nokia-Care-Suite.shtml
http://forum.gsmhosting.com/vbb/f29...a-package-manager-download-firmwares-1659582/
Steps that worked for me
1. Download the firmware
2. Open Product ex: RM-915
3. In Nokia Suite
Programming
Select the firmware package
turn off the phone
put the connection - no connection mode
on screen you should message to
hold power and volume lower button
when you get a buzz, hit the retry button.
Click to expand...
Click to collapse
okay so i flashed this rom and got Internet sharing MMS and Data all working great. But i noticed this is a pre-Amber (gdr2) rom.
have you been able to update to GDR3 (Nokia Black) ? if not have to flashed to a different rom?
thanks.

any 8.1 unbranded?
any 8.1 unbranded?
as my 520 is now on 8.1w...and it is nice.
but issue is the network, i cannot chose 2G or 3G.. it show 4G which is in real 3.5G
they trick the user with the 4G icon, where is it 2100 3G HSDAP..
and to the one who ask how to unlock...in eBay i paid 3.4$ to some one, who give me the unlock code..and phone is unlock.
i buy from eBay new for 30$

Sprint S4 Carrier Flashing/Akey/SPC

So i have seen many guys charging a good amount of money for this, DFS is charging like 50$ per phone. Many guys are struggling to get thr phone working since they are unable to flash Akey/SPC which is needed for some carriers like Reliance, TATA in India atleast.
I'm not going to put usual diag setup stuff right now, or may not able to update it at all.
The below commands should be sent step by step as mentioned through DFS or CDMA workshop or any other tools which you prefer to use. Also you need to first send the 16 digit password for your phone model. I believe for L720 it is "2012112120131219"
----To change SPC to 000000 or any anything
00
4B13030000000000
4B130F006E766D2F6E756D2F383500
4B1308006E766D2F6E756D2F383500
4B13020041020000B60100006E766D2F6E756D2F383500
4B1305000000000000000000303030303030
4B13030000000000
Click to expand...
Click to collapse
In the second last line i.e. "4B1305000000000000000000303030303030", the last 12 digits are your SPC hex value, if you want to change it to anything else like 123456, you need to edit the last 12 digits and make it look like "4B1305000000000000000000313233343536"
----To change the A-Key to anything, in the below case, akey decimal to be flashed is 11111111133333333785 (the akey hex will be: 9A3298B4E238A719)
00
4B13030000000000
4B130F006E766D2F6E756D2F323500
4B1308006E766D2F6E756D2F323500
4B13020041020000B60100006E766D2F6E756D2F323500
4B130500000000000000000019A738E2B498329A
4B13030000000000
Click to expand...
Click to collapse
In the above cmds, if you take a close look at the last 16 characters in the 2nd last line and the mentioned akey hex, you maybe observe that the akey hex in the cmd is in a reverse manner. You can change generate your akey online or via regular tools like DFS and arrange it in the similar manner to flash. You might need to downgrade your modem in order to get this working, please post here if it works without downgrading the modem.
This has been tested on 2xGalaxy Victory and one Sprint L720, so please test and report if this works for you.

funkym0nk3y said:
Mods
if this has been posted in wrong section, then please pardon my ignorance and kindly move it to appropriate section.
Click to expand...
Click to collapse
Good write up. I flash phones and make tutorials. Some people on here claim they can do this and do that but, haven't written a clear guide yet on how to do it. Lol But, my guides are free and to the public.
Also this should be in the general section. Development is only for roms, etc.

as for resetting the SPC, you will need to downgrade the modem from MF9 to MDL or MDC... i have tried it with MF9 and didn't work...
thanks for sharing

PapaDocta said:
as for resetting the SPC, you will need to downgrade the modem from MF9 to MDL or MDC... i have tried it with MF9 and didn't work...
thanks for sharing
Click to expand...
Click to collapse
If you dont mind someone asking, how do you downgrade the modem? I tried to downgrade the complete os from samsung-udpates but nothing has worked for me.... any other suggestions??? thx in advance

to downgrade the modem just download the old modem's tar file and flash it via odin.. it should work without any problems

PapaDocta said:
to downgrade the modem just download the old modem's tar file and flash it via odin.. it should work without any problems
Click to expand...
Click to collapse
I actually tried that and still nothing! Maybe i just have a phone that wont take....? I have tried several os downgrades and last resort was the modem downgrade and still the same result: UNABLE TO USE THE 16 DIGIT PASSWORD TO ACCEPT ON WORKSHOP.....
I appreciate your input and help brother thx again.

If you're serious about flashing phones you should invest the proper amount of money, in the proper tools.

slawson said:
If you're serious about flashing phones you should invest the proper amount of money, in the proper tools.
Click to expand...
Click to collapse
TKS BRO

Thank you this is the only thing i have seen that has actually had some success, at least i did not get any errors but how do i know if the akey is in if i press read i just get a lot of cps errors. DOes the trial version of dfs not let you do anything in the cave ?
anyway thanks again hopefully this works.

Many parameters on a number of phones are write only, so you won't be able to read them.

flashing rom fear
So I got my phone working on my cdma carrier in Indonesia. But now I am concerned about flashing New roms esp using Odin and factory resetting. Will I lose my settings with a factory reset?
How do I flash roms and still keep my network settings?
Thanks

jarcher12 said:
So I got my phone working on my cdma carrier in Indonesia. But now I am concerned about flashing New roms esp using Odin and factory resetting. Will I lose my settings with a factory reset?
How do I flash roms and still keep my network settings?
Thanks
Click to expand...
Click to collapse
To answer my own question since nobody else did
Dont worry i just installed the one click mf9 rom and am now free of nags for reboot and the annoying register phone on sprint. very happy with the phone and its performance, blows my old epic out the water.

Hi,
did anyone try to change the akey for Sprint Note 3... ? N900P
thanks in advance...

Add to my Framily!!!!
A00275186Ak
Thank You!

jarcher12 said:
So I got my phone working on my cdma carrier in Indonesia. But now I am concerned about flashing New roms esp using Odin and factory resetting. Will I lose my settings with a factory reset?
How do I flash roms and still keep my network settings?
Thanks
Click to expand...
Click to collapse
Using cwm to flash another rom
Sent from my SPH-L720 using XDA Premium 4 mobile app

I have a Sprint SPH-L720. I tired to use the command 4B1305000000000000000000303030303030 it accepts it but responds back with a differnt command and the SPC doesn't change.
I did downgrade the baseband to both MDC and MDL with it still not working.
Any ideas how to change the SPC to 000000?

Been awhile but I thought I posted an update. Downgraded to the MDC modem and tired again and it solved my problem.
Thank you for the awesome post.

Using the command
please how will i make use of this command.
i am currently using Sprint SPH-L720T
any other methods of changing spc?

Okijaamaka said:
please how will i make use of this command.
i am currently using Sprint SPH-L720T
any other methods of changing spc?
Click to expand...
Click to collapse
You need a PC software such as DFS to send these command to your phone. You also have to enable diag mode in your phone before connecting it to the PC's USB.

rizapn said:
You need a PC software such as DFS to send these command to your phone. You also have to enable diag mode in your phone before connecting it to the PC's USB.
Click to expand...
Click to collapse
i have DFS but do you have step by step on how to connect it?
please. want to change my spc to 000000

Diagnostic Mode for Moto G after flashing CM 12.1

Hi!
I'm rather amateur than expert, but from few days I'm trying to unlock new bands (frequencies) to my Moto G XT1064 (make it to work with european carriers). I haven't managed to did it under the original system, so for now I have flashed CyanogenMod 12.1 for titan(Moto G 2014) and tried do that with changed system and kernel. But I have met unexpected problem : I cannot enter the Diagnostic Mode! Before system change it was sufficient to run BP Tools option from Bootloader menu, but now, no matter what I do, I can't make USB to work in DIAG MODE.
Can u help me? - How enter to DIAG MODE other way, or repair BP Tools?

mati108 said:
Hi!
I'm rather amateur than expert, but from few days I'm trying to unlock new bands (frequencies) to my Moto G XT1064 (make it to work with european carriers). I haven't managed to did it under the original system, so for now I have flashed CyanogenMod 12.1 for titan(Moto G 2014) and tried do that with changed system and kernel. But I have met unexpected problem : I cannot enter the Diagnostic Mode! Before system change it was sufficient to run BP Tools option from Bootloader menu, but now, no matter what I do, I can't make USB to work in DIAG MODE.
Can u help me? - How enter to DIAG MODE other way, or repair BP Tools?
Click to expand...
Click to collapse
*#*#4636#*#*
Go to Phone information, tap on menu, then go to Select radio band. I see that you got the US version. You probably would have been better off getting the XT1063, which is the Global version.

Ragarianok said:
*#*#4636#*#*
Go to Phone information, tap on menu, then go to Select radio band. I see that you got the US version. You probably would have been better off getting the XT1063, which is the Global version.
Click to expand...
Click to collapse
Thanks, this is answer for my main problem(changing bands), but not for the question about DIAG MODE. Actually, I tried it earlier and was not satisfied with result - still got only EDGE mobile data transfer on my device. I want to try another ways to enable european bands - by changing values in non volatile memory - and to do that need to enter Diagnostic Mode...

mati108 said:
Thanks, this is answer for my main problem(changing bands), but not for the question about DIAG MODE. Actually, I tried it earlier and was not satisfied with result - still got only EDGE mobile data transfer on my device. I want to try another ways to enable european bands - by changing values in non volatile memory - and to do that need to enter Diagnostic Mode...
Click to expand...
Click to collapse
Honestly, I've never even heard of a diagnostic mode on our phone.
---------- Post added at 06:28 PM ---------- Previous post was at 06:20 PM ----------
You can try this though:
http://forum.xda-developers.com/moto-g-2014/help/xt1064-global-bands-unlock-t2944139
I still say that the XT1063 would have been a better option.

Ragarianok said:
Honestly, I've never even heard of a diagnostic mode on our phone.
---------- Post added at 06:28 PM ---------- Previous post was at 06:20 PM ----------
You can try this though:
http://forum.xda-developers.com/moto-g-2014/help/xt1064-global-bands-unlock-t2944139
I still say that the XT1063 would have been a better option.
Click to expand...
Click to collapse
Well, as far as I know Diagnostic Mode allows your computer to use USB connection as COM port. It should be available on every phone with qualcomm processor - i.e. Moto G 2014. If you have original ROM and KERNEL, you can turn it on (on Moto G) by entering into bootloader and then choosing to boot in BP Tools Mode. The system should start normally, but when you plug your phone to computer, you should see "QC Diag Port" in device manager instead of "XT1064" or "Moto G Phone".
The link you have pasted leads to this link in the first post: http://forum.xda-developers.com/moto-g/general/unlock-hspa-bands-moto-g-1700mhz-xt1032-t2878441
I did all steps, but there was no progress. In another thread I've read that there can be some limitations in original ROMs that are set to prevent you from unlocking new bands. It was said there to flash custom ROM, for example CM12.1, and then try unlocking again. So I did it, but now I've stuck on step 7. because I don't have "QC Diag Port" (cannot enable Diag Mode).
Yup, now I know that XT1063 with Global Bands would have been a better choice, but it so too late to change my decision, so can we stop mentioning that and focus on the problem?

mati108 said:
Well, as far as I know Diagnostic Mode allows your computer to use USB connection as COM port. It should be available on every phone with qualcomm processor - i.e. Moto G 2014. If you have original ROM and KERNEL, you can turn it on (on Moto G) by entering into bootloader and then choosing to boot in BP Tools Mode. The system should start normally, but when you plug your phone to computer, you should see "QC Diag Port" in device manager instead of "XT1064" or "Moto G Phone".
The link you have pasted leads to this link in the first post: http://forum.xda-developers.com/moto-g/general/unlock-hspa-bands-moto-g-1700mhz-xt1032-t2878441
I did all steps, but there was no progress. In another thread I've read that there can be some limitations in original ROMs that are set to prevent you from unlocking new bands. It was said there to flash custom ROM, for example CM12.1, and then try unlocking again. So I did it, but now I've stuck on step 7. because I don't have "QC Diag Port" (cannot enable Diag Mode).
Yup, now I know that XT1063 with Global Bands would have been a better choice, but it so too late to change my decision, so can we stop mentioning that and focus on the problem?
Click to expand...
Click to collapse
Good news! I can't get it to work either. That means it's not just you.
Bad news! Unless someone else can come up with another way to enable those extra bands, you are stuck with those pesky domestic bands. Personally, I would have titled this thread differently. Something like "Enable Euro Bands on XT1064?" Might have gotten better responses.
When in doubt, choose Global.
Good luck.

Help for a noob

Hello, firstable congratulations to everyone to made an awesome forum, page, etc...
Im from Mexico and I have a HTC one M8 Sprint and I use it on GSM band
a guy sold me with a program named teamwin this program appears when I try to install the new version
I already have the 4.4.3 android version, 6.0 sense and 2.16.651.4 sofware version
and my doubt is can I make any modd to my celphone? I guess that's sounds pretty obviously but I'm new on the topic
I remember I can modd a sony ericsson telephones (like w600) but now Im so noob on the celphone topics.
I like learn new things and I only asking for your help, maybe if you can help me I appreciate that
All the links you can give me will be readed 100% for sure.:good:
So greetings for everyone and again please help me to get this cellphone a new life :laugh:

Hold down power and vol up for several seconds to force a reboot. The moment the screen goes dark to reboot, let go of those buttons and only hold vol down. Don't let go, until you see a white screen with various info on it. This it the bootloader. If the phone simply reboots to OS or Safe Mode, you just had bad timing of the button combo. Repeat the process until you see the bootloader screen.
On the bootloader screen, does it say RELOCKED, UNLOCKED, or LOCKED near the top?
Does it say Software modified, or official?
Does it say s-off or s-on?

redpoint73 said:
Hold down power and vol up for several seconds to force a reboot. The moment the screen goes dark to reboot, let go of those buttons and only hold vol down. Don't let go, until you see a white screen with various info on it. This it the bootloader. If the phone simply reboots to OS or Safe Mode, you just had bad timing of the button combo. Repeat the process until you see the bootloader screen.
On the bootloader screen, does it say RELOCKED, UNLOCKED, or LOCKED near the top?
Does it say Software modified, or official?
Does it say s-off or s-on?
Click to expand...
Click to collapse
It says
Tampered
Unlocked
S-ON
About the OS I don't know, the phone already has SuperU app, also I don't know how it works

Erbat said:
It says
Tampered
Unlocked
S-ON
About the OS I don't know, the phone already has SuperU app, also I don't know how it works
Click to expand...
Click to collapse
You need to update the firmware, to do much of any mods (like current ROMs).
You can do so by either:
1) Finding the proper stock nandroid and stock recovery, then OTA update to latest version.
2) Relock the bootloader, and use latest Sprint RUU (will wipe the phone).

redpoint73 said:
You need to update the firmware, to do much of any mods (like current ROMs).
You can do so by either:
1) Finding the proper stock nandroid and stock recovery, then OTA update to latest version.
2) Relock the bootloader, and use latest Sprint RUU (will wipe the phone).
Click to expand...
Click to collapse
I'm a bit affraid because I don't know if after to do that my phone still works
It's sprint and I use it here in mexico with movistar so I need something else to do this proccedure? I also searching the topics you told me here in the forum

Erbat said:
I'm a bit affraid because I don't know if after to do that my phone still works
Click to expand...
Click to collapse
In your first post, you ask about doing mods. Now you are saying you are afraid to. So I have no idea what your comfort level, what you are willing to accomplish, etc.
As long as you are willing to learn, put in some time reading and understanding, and follow instructions carefully, there isn't much to be afraid of. Any mods to the phone involve some risk. But the risk of permanent damage (a true "brick") are minimal. The worst that is likely to happen, is the phone fails to boot, and you may need to troubleshoot for an hour to 2 to get it back running. But that happens to just about anyone that mods phones, at some time or other. Its just part of the game.
But in the phone's current condition, something needs to be done by you, in order to update the phone in any way; whether it be by official means (RUU or OTA) or custom ROM. Otherwise, it will be stuck on Android 4.4.3 as it is now.
Erbat said:
It's sprint and I use it here in mexico with movistar so I need something else to do this proccedure?
Click to expand...
Click to collapse
Not sure what you are asking, are you wondering if any additional hardware is needed? You will need a computer for either method I stated, plus the sync cable that came with the phone (or other charge/data cable). PC is required for Method #2.

Yes for sure Im reading the past days about the topic and the fears I guess its for my phone became to an expensive brick, but I want to do this, I sent you a PM and I read your answer sorry for do that.
And finally about the last quote, I mean the M8 its originally sprint (on the starts screen says) so I want to know if its possible make the unblock totally to use on any company of the world or the country (Mexico) above than GSM, maybe 3G or in the best way 4G

Erbat said:
And finally about the last quote, I mean the M8 its originally sprint (on the starts screen says) so I want to know if its possible make the unblock totally to use on any company of the world or the country (Mexico) above than GSM, maybe 3G or in the best way 4G
Click to expand...
Click to collapse
So it sounds like you already using the phone on Movistar, just not with 3G or 4G?
There is a mod to unlock bands, which seems to work on your Sprint CDMA version (from what I understand). But it requires s-off ($25 by sunshine app) and is a slightly more complicated mod: http://forum.xda-developers.com/htc-one-m8/general/unlock-bands-qualcomm-device-phone-t2880239
So if you are unsure about doing what I've previously described; the mod to unlock bands is definitely the next level beyond that. Mods done with s-off are more risky, and can actually brick the phone (render it permanently unusable).
Whatever you do, do NOT try to flash another carrier/region versions radio, firmware, RUU, etc. in an attempt to change the band support. You may see some recommendations to that effect. But this does NOT work on the Sprint version, and will probably BRICK your phone.

Sorry I think I don't give my idea correctly, my English is not good.
I wonder if you can make my htc have the most updated software and if it is possible to use other phone network than the GSM because since I buyed (used) has the same software, the same HTC Sense and I could only use the internet GSM mobile network
My phone is
m8_WHL PVT SHIP S-ON *Unlocked*
So I would like to write the correct idea because your help it's usefull for me
really I appreciate your help and therefore not want to lose by confusion or my bad english
then I hope this time to let me know if this is better for your
I'm trying to do my best

Erbat said:
Sorry I think I don't give my idea correctly, my English is not good.
I wonder if you can make my htc have the most updated software and if it is possible to use other phone network than the GSM because since I buyed (used) has the same software, the same HTC Sense and I could only use the internet GSM mobile network
Click to expand...
Click to collapse
Updating the software is a completely separate matter from the phone's band support (3G and LTE bands the phone is compatible with).
I already told you how to update the software, in Post #4 above.
To see if the phone will work with your carrier's 3G or LTE network, you first need to know what 3G and 4G band (or bands) they use for each. Can't really do anything without that basic info. Either research online, or call your carrier and ask them. This is something you should have done before buying the phone; as changing to the proper band support is not always possible.

redpoint73 said:
To see if the phone will work with your carrier's 3G or LTE network, you first need to know what 3G and 4G band (or bands) they use for each. Can't really do anything without that basic info. Either research online, or call your carrier and ask them. This is something you should have done before buying the phone; as changing to the proper band support is not always possible.
Click to expand...
Click to collapse
The band works on 850/1900, while 4G LTE conection use band 4 - LTE AWS frecuency of 1700 MHz and 2100 MHz.
I work today on the software ( the most important for me )

Erbat said:
The band works on 850/1900, while 4G LTE conection use band 4 - LTE AWS frecuency of 1700 MHz and 2100 MHz.
Click to expand...
Click to collapse
Sprint M8 supports 3G bands 850 and 1900.
Are you sure you entered your carrier's APN info correctly?
Did you try the SIM card in another phone, to make sure the SIM works for 3G?

redpoint73 said:
Sprint M8 supports 3G bands 850 and 1900.
Are you sure you entered your carrier's APN info correctly?
Did you try the SIM card in another phone, to make sure the SIM works for 3G?
Click to expand...
Click to collapse
yes I use the right APN settings but when I bought the guy who sold it to me also told me it was unblock for any company here in Mexico but the problem is that you could not upgrade because when the file is downloaded and is installed, the phone enters into recovery mode and can not be or I do not know if it's my mistake, you can not install at all
He say that if I upgrade or modify the phone I can lose part of the unblock of the phonel and it became unusable here in Mexico

I screwed a lot
I don't know what I did wrong on the process of re-stock the phone and now don't start.
only shows the white screen with HTC green logo.
I rememberd when I try to wipe I check all the options and "I swipe to wipe" later when the phone will be reboot
shows me a message about the superU and I install (because already has it)
I was scared and search about this and only found a way to enter on bootloader and says this
*Tampered*
*Relocked*
Well, 6 hours later I have this now:
*Tampered*
**Unlocked**
m8_WHL PVT SHIP S-ON
HBOOT-3.18.0.0000
OS-2.16.651.4
eMMC-boot 2048MB
but when I unlock the bootloader (here's the tutorial of bootloader http://www.htcdev.com/bootloader)
I see the recovery mode once but when I try to do the next step (http://forum.xda-developers.com/showthread.php?t=2755657)
I can not start the recovery mode and I don't do any of progression
Also I can see an message saying me the phone hasn't any OS file so I guess that's the reason I can make it start, only turn on and shows the same white screen with HTC logo, I can entered to Bootloader and FASTBOOT but when I select recovery the phone returns to HBOOT and when I turn off and later turn on happen the same (entered directly to HBOOT screen)
Im a bit concerned about that I hope you can teach me how
*Edited now I can enter to recovery I relocked and unlocked again and I can enter again to recovery and bootloader, please help me to put the files of OS
maybe with a SD card?

Return to stock
Hi Erbat,
first of all it would be nice to get an overview of your device and its versions, you can do this by doing the fastboot command "fastboot getvar all"
The most important version wich you already have is your OS 2.16.651.4, everything what you try to flash to your device if you want to return to stock should match this number or it will mostly fail.
So at this point forget about the Guide with official OTA updates and root access, because its for 4.16.401.10 and you should mainly focus on returning to stock without root to get new updates (easier)
I dont know how much knowledge you already have but just to mention:
Every OS with 2.16.651.4 is for your Sprint version, this means all of the files without 651 will lead in the wrong direction.
Later when you use a RUU ("official" files to return to stock firmware) or a nandroid backup (stock backup created by other users), the files and backups you will find have to match exactly to your OS Version 2.16.651.4 to work.
So at the moment you should focus on returning your device back to stock firmware and OS first, after that you can recieve official OTA updates from HTC :good:
The tutorials/threads you should focus on are mainly these two:
[GUIDE][S-ON] Restore your (European) HTC One M8 back to stock
[tutorial] How to get back on stock with TWRP Stock Nandroid Backups
Edit: You can't use your recovery, because if i understood this right you got TWRP (a custom recovery) before and might have corrupted/deleted it, simply flash the newest version of TWRP 2.8.7.0 with the fastboot command "fastboot flash recovery *NAME-OF_RECOVERY*.img"
TWRP: http://teamw.in/project/twrp2/225/
(If i got anything wrong pls correct me ^^)

KODEC.4 said:
Hi Erbat,
first of all it would be nice to get the an overview of your device and its versions, you can do this by doing the fastboot command "fastboot getvar all"
The most important version wich you already have is your OS 2.16.651.4, everything what you try to flash to your device if you want to return to stock should match this number or it will mostly fail.
So at this point forget about the Guide with official OTA updates and root access, because its for 4.16.401.10 and you should mainly focus on returning to stock without root to get new updates (easier)
I dont know how much knowledge you already have but just to mention:
Every OS with 2.16.651.4 is for your Sprint version, this means all of the files without 651 will lead in the wrong direction.
Later when you use a RUU ("official" files to return to stock firmware) or a nandroid backup (stock backup created by other users), the files and backups you will find have to match exactly to your OS Version 2.16.651.4 to work.
So at the moment you should focus on returning your device back to stock firmware and OS first, after that you can recieve official OTA updates from HTC :good:
The tutorials/threads you should focus on are mainly these two:
[GUIDE][S-ON] Restore your (European) HTC One M8 back to stock
[tutorial] How to get back on stock with TWRP Stock Nandroid Backups
Edit: You can't use your recovery, because if i understood this right you got TWRP (a custom recovery) before and might have corrupted/deleted it, simply flash the newest version of TWRP 2.8.7.0 with the fastboot command "fastboot flash recovery *NAME-OF_RECOVERY*.img"
TWRP: http://teamw.in/project/twrp2/225/
(If i got anything wrong pls correct me ^^)
Click to expand...
Click to collapse
OK I will try to do those things you've post here.
So tonight before I went to sleep the recovery says I don't have OS installed, that's so confusing because I don't know how install it again, I'm pretty noob so I (if you can do it) explain me a lot to do.
Yesterday already learn to use fastboot and the files and those things to do on the computer, I like to learn and more if is for recover my phone :laugh:

Erbat said:
OK I will try to do those things you've post here.
So tonight before I went to sleep the recovery says I don't have OS installed, that's so confusing because I don't know how install it again, I'm pretty noob so I (if you can do it) explain me a lot to do.
Yesterday already learn to use fastboot and the files and those things to do on the computer, I like to learn and more if is for recover my phone :laugh:
Click to expand...
Click to collapse
I know it looks pretty bad for a "noob" if he got no OS on his device and it won't boot anymore, but don't worry as long as you get your phone into fastboot mode you can fix everyting :fingers-crossed:

KODEC.4 said:
I know it looks pretty bad for a "noob" if he got no OS on his device and it won't boot anymore, but don't worry as long as you get your phone into fastboot mode you can fix everyting :fingers-crossed:
Click to expand...
Click to collapse
I can't do anything on cmd, my phone hasn't battery today and when I try to do fastboot getvar all say wating for your device and yesterday obviously don't say this
I need wait to 30%? I guess I have readed this before

Charge it up, restart everything (pc) and try again. You can use "fastboot devices" wich will list all devices connected in fastboot mode (ofc you must choose fastboot in bootloader menu first)
Next could be that you have HTC sync active witch might block something -> uninstall HTC sync
Otherwise you might have driver problems, if so, uninstall htc drivers and sync and reinstall HTC sync to get new drivers. -> uninstall sync only again (maybe reboot)
If all this does not work search for specific fastboot drivers for the M8 and try it with them

Erbat said:
I don't know what I did wrong on the process of re-stock the phone and now don't start.
only shows the white screen with HTC green logo.
I rememberd when I try to wipe I check all the options and "I swipe to wipe" later when the phone will be reboot
Click to expand...
Click to collapse
You should never wipe any of the partitions in the TWRP "Advanced" menu, unless you know exactly that they mean, and what the result will be (those options are called "Advanced" for good reason!). Even if the phone was properly working before, what you did was to wipe the OS (system partition) and make it stop working!
Further, you wiped any backup files and personal data that may have been on internal storage or the removable SD.
Simple rule when modding the phone: Do not experiment or make up your own solutions (will almost always fail and possibly make matter worse); and only do exactly what is directed to you from the proper guides, reputable "helpers", etc.
---------- Post added at 10:30 AM ---------- Previous post was at 10:27 AM ----------
Erbat said:
I screwed a lot
I don't know what I did wrong on the process of re-stock the phone and now don't start.
Click to expand...
Click to collapse
Can't help you, if you don't tell us exactly what you did: step by step, in specific detail, with links to the files you are trying to use, exact file names, etc.
If you don't tell us what you did, we can't see what you did wrong.
---------- Post added at 10:32 AM ---------- Previous post was at 10:30 AM ----------
Erbat said:
I see the recovery mode once but when I try to do the next step (http://forum.xda-developers.com/showthread.php?t=2755657)
Click to expand...
Click to collapse
This guide has nothing to do with returning to stock, and is not for your version of the M8.
Nothing good can come of this; for what you are trying to do.
If you didn't know what you were doing, you should have stopped and asked. Learning and reading is good (and I applaud the effort), but don't do anything unless you are sure about it. In your case particular (due to your lack of knowledge/experience) I'd recommend not do anything unless we specifically direct you to. You seem to be going down the wrong roads, and just want to make sure we mitigate that now.
---------- Post added at 10:39 AM ---------- Previous post was at 10:32 AM ----------
Erbat said:
I can't do anything on cmd, my phone hasn't battery today and when I try to do fastboot getvar all say wating for your device and yesterday obviously don't say this
I need wait to 30%? I guess I have readed this before
Click to expand...
Click to collapse
The phone needs to be powered on, and in bootloader-fastboot mode for any fastboot commands to work.
Charge the phone for a few hours, and try again.
We need to get fastboot working, to move forward at all.