Database Develop

[Q] Currently unable to install any rom

Hi guys,
Current situation
I haven't been able to use my phone for a good day now and I been busy reading guides, trying out stuff for a bunch of hours now. I thought it was time to ask you guys. Currently this is the only thing I'm able to do:
When I boot normally its stuck on the black screen with Samsung Galaxy Note on it.
When I boot with volume down, a screen popups up if I'm sure than press volume up. After that I'm in ODIN mode (says so with red letters in the left top). Below that it says: PRODUCT NAME: GT-N7000 , CUSTOM BINARY DOWNLOAD: NO , CURRENT BINARY: SAMSUNG OFFICIAL.
In the middle of the screen below the Android guy it says: Downloading... Do not turn of target !! (I'm not really sure if its suposed to say downloading there, while its not downloading anything?)
What I did so far
I came from a gingerbread Rocket ROM and decided to try out the ICS Stunner rom. I downloaded the ROM and read the install discription. I pretty much went into CWM right away to install the zip (rom) from SD card. It did work and ofcourse everything was still there cause I didnt wipe anything. But I noticed that a bunch of things didn't work and a lot of programs where crashing. I assumed I must have missed a step so I decided to go with the 'Squeaky Clean' install, which was posted on the team-passion website.
This was the last time I was able to get into CWM and connect my phone true USB with my laptop. Because I did the following steps:
Reboot in to ClockworkMod Recovery.
Format the following:
- Wipe Data/Factory Reset
- Wipe Cache Partition
**Enter 'Mounts and Storage'**
- Format everything it will allow you to
**Go Back, enter 'Advanced'**
-Wipe Dalvik Cache
-Wipe Battery Stats
**Go Back to main menu, reboot system**
The next step on that list is: Remove your battery and boot up into 'Download Mode'. But the only mode I am getting into is the ODIN MODE where it already says 'Downloading...'. When I try to flash using ODIN, it isn't able to setup the connection. It does identify that the phone is connected because the ID:COM is yellow on 0:[COM3]. It didn't before, but after reading somewere that it might help to install Kies for the drivers it did.
Also tried "InitialCFRootFlasher" and "DooMLoRD_v4_ROOT-zergRush-busybox-su" but both arent able to establish the connection. Just like ODIN.
What I'd like to do
I'd prefer going with the ICS Stunner ROM, seeing thats how this all started. But currently I'd settle for anything working, because being phoneless for a day is pretty anoying hehe.
What do you guys suggest?

I really don't know how u understood the process. But just don't screw this. Go download any of the pre rooted odex rom -link in my signature - and flash it via odin.
Or any rootable rom from dr ketan's thread - link in my signature - and follow the steps mentioned there to the Dot slowly and calmly. Just get to GB and rooted. Then report here. Will tell u how to go to ics stunner after that.
BOOMED from my BOMBASTIC NOTE

Thanks for the quick reply. I'm currently downloading one of the prerooted roms from your signature. However it would suprise me if ODIN allows me to install these seeing it can't really connect to the phone. Am I suposed to be in the 'Downloading... Do not turn of target !!' screen on my phone, while connected to laptop true USB?
Will update once I'v got it.

h4y0 said:
Thanks for the quick reply. I'm currently downloading one of the prerooted roms from your signature. However it would suprise me if ODIN allows me to install these seeing it can't really connect to the phone. Am I suposed to be in the 'Downloading... Do not turn of target !!' screen on my phone, while connected to laptop true USB?
Will update once I'v got it.
Click to expand...
Click to collapse
Yup u need to be in that mode. The odin on your PC should show the Com port as yellow. If it doesnt then there is some drivers problem.

It is connected yeah, the com port is shown as yellow. After loading any rom in PDA, Phone or Bootloader and only checking auto reboot and f. reset time this is what happens:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
And thats where its hanging, nothing on the phone screen is changing.
I don't remember the screen saying 'Downloading..' last time I flashed something. It's already saying that when I enter the screen, when its not downloading anything.

Apparently I'm not able to make edits yet here so heres another post after figuring out how to load these files:
It is connected yeah, the com port is shown as yellow. After loading the three files in ODIN under PDA, PHONE and CSC just like on the screenshot in your signature. And only checking 'Auto reboot' and 'F. Reset Time' the following happens:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Rooted_Stock_Odex_N7000XXLA6.tar.md5 is valid.
<OSM> MODEM.tar.md5 is valid.
<OSM> CSC_N7000XEULA1_XEU.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..

abhisahara said:
Just get to GB and rooted. Then report here.
Click to expand...
Click to collapse
Done! I'm still not sure what went wrong, I think placing the files in the wrong place in ODIN. Got a tip from someone how to place them and they worked in one go. Pretty weird cause I was using the same setup as the XDA guide post.
Main problem is solved now, I'll have to look into the ICS thing now. Thanks for your help.

h4y0 said:
Done! I'm still not sure what went wrong, I think placing the files in the wrong place in ODIN. Got a tip from someone how to place them and they worked in one go. Pretty weird cause I was using the same setup as the XDA guide post.
Main problem is solved now, I'll have to look into the ICS thing now. Thanks for your help.
Click to expand...
Click to collapse
Sorry was away so couldnt reply. The setup shown i xda should work perfectly. Anyways its good to know that you got all things settled. You can install the ICS Stunner (no touchwiz and no samsung apps) if you so want. Remember to backup your data as you will have to wipe data for going to ICS. From rooted GB install mobile odin then download the lp1 repack from my signature and after all that is done reboot to recovery clear caches and data and flash stunner (download the latest build by clicking Stunner in my signature) clear caches and data and reboot.
* Triangle away is required only when you flash lp1 through PC Odin.*

Ended up using the mobile odin application, works like a charm.
Thanks for your help!

h4y0 said:
Ended up using the mobile odin application, works like a charm.
Thanks for your help!
Click to expand...
Click to collapse
You are welcome. Glad it all worked for you. Hitting some thanks button will be good too LOL

Root your Samsung Galaxy Mini GT-S5570I

update.zip
I Used this to root my Samsung Galaxy Mini GT-S5570I
Copy it to your sd card
Go to stock recovery by pressing vol. up button + home button + power button
Use Volume up and down to move up and down and home button to select
Press update from sdcard and find this file
Your phone is rooted
Press thanks if it works

Is that rooting method good for GB 2.3.6 or is it for ICS only? I'm looking to root a Galaxy Mini GT-S5570 (not the S5570i 'plus' version) for a friend of mine that's running GB 2.3.6 and was wondering about the best & quickest way to do it. My own phone's a Sony Xperia Ray so there's obviously a few differences I have to get my head around!
Also, can one flash custom ROMS on the Samsung Mini without having to unlock the bootloader? And how does ICS run on this phone? (or does it?) Would you recommend upgrading or leaving it with GB 2.3.6?
Lastly, is there a PC Companion type application for Samsung where you can upgrade or repair the firmware? Might you have a link to it? - just in case things go badly wrong..

seamo123 said:
Is that rooting method good for GB 2.3.6 or is it for ICS only? I'm looking to root a Galaxy Mini GT-S5570 (not the S5570i 'plus' version) for a friend of mine that's running GB 2.3.6 and was wondering about the best & quickest way to do it. My own phone's a Sony Xperia Ray so there's obviously a few differences I have to get my head around!
Also, can one flash custom ROMS on the Samsung Mini without having to unlock the bootloader? And how does ICS run on this phone? (or does it?) Would you recommend upgrading or leaving it with GB 2.3.6?
Lastly, is there a PC Companion type application for Samsung where you can upgrade or repair the firmware? Might you have a link to it? - just in case things go badly wrong..
Click to expand...
Click to collapse
Don't think it would work for the normal version but u could try it, just clear the cache and install, if aborted try another one
The bootloader will be unlocked usually when u flash a rom by cwm

not working
---------- Post added at 03:18 PM ---------- Previous post was at 03:17 PM ----------
not really working

root doesn't work
Hello,
I've followed the steps you mentioned but the installation was aborted.
I received the following message:
Getprop("ro.product.product") == "GT-B7510"
E:Error in /tmp/sideload/package.zip
(Status 7)
Installation aborted
Any ideas?
Thanks

ronku99 said:
Hello,
I've followed the steps you mentioned but the installation was aborted.
I received the following message:
Getprop("ro.product.product") == "GT-B7510"
E:Error in /tmp/sideload/package.zip
(Status 7)
Installation aborted
Any ideas?
Thanks
Click to expand...
Click to collapse
Wrong phone. B7510. This is for S5570i.
Sent from my GT-S5570 using xda premium

ast00 said:
Wrong phone. B7510. This is for S5570i.
Sent from my GT-S5570 using xda premium
Click to expand...
Click to collapse
I have a GT-S5570I and I downloaded the update.zip file from the link in the first message.
is there a newer file?
---------- Post added at 03:30 PM ---------- Previous post was at 02:40 PM ----------
ronku99 said:
I have a GT-S5570I and I downloaded the update.zip file from the link in the first message.
is there a newer file?
Click to expand...
Click to collapse
SUCCESS!!!!
I looked further and downloaded a file from a link in a different thread: http://forum.xda-developers.com/showthread.php?t=1659534.
That did the trick!
Thanks!

ronku99 said:
I have a GT-S5570I and I downloaded the update.zip file from the link in the first message.
is there a newer file?
---------- Post added at 03:30 PM ---------- Previous post was at 02:40 PM ----------
SUCCESS!!!!
I looked further and downloaded a file from a link in a different thread: http://forum.xda-developers.com/showthread.php?t=1659534.
That did the trick!
Thanks!
Click to expand...
Click to collapse
Weird... The error said it's a different phone. My bad.
Sent from my GT-S5570 using xda premium

Problem
Guys i have problem with my gt-s5570I
I rooted it than tryed to install rom but it is just not possible. When i turn on my phone it cant boot. when i turn it on using vol up + power+ middle button it boots a android system recovery and with blue letters it writes:
Appling Muti-csc --
E:failed to mount /system (invaild argument)
E:failed to mount /system (invaild argument)
than i enter apply update ...
than CMW_gt-s5570i.zip
and than it boots clockworkmod recovery v5.0.2.6
than i wipe data/catch and i enter instal zip form sd ... and i enter ss55570i-jblastv303. and than installation procces begins and it finishes and there writes official rom by avijit gohosh82 .... install from sdcard complete.
But when i reboot my phone it cant boot same as at begining. Than i again pres vol up + power + middle bottun and it loads android system recovery .... yes like from start. I tryed this multiple times with same result. Even tryed other roms and downloaded all files again.
Then i tryed with kies firmware recovery and it cant even recognize my phone.
Then i tryed ODIN and when i enter download mode odin doesnt recognize my phone , but when i enter android system recovery it recognize my phone but result is
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> DefaultCalDataWithBoot_S5570IXXKL4_REV03.tar.md5 is valid.
<OSM> PDA_S5570IXXKL4_REV03.tar.md5 is valid.
<OSM> MODEM_S5570IXXKL4_REV03.tar.md5 is valid.
<OSM> GT-S5570I-MULTI-CSC-OXXKL3.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
it is when i uncheck bootloader cuz when i check it it writes error ... guys pls help

drose said:
Guys i have problem with my gt-s5570I
I rooted it than tryed to install rom but it is just not possible. When i turn on my phone it cant boot. when i turn it on using vol up + power+ middle button it boots a android system recovery and with blue letters it writes:
Appling Muti-csc --
E:failed to mount /system (invaild argument)
E:failed to mount /system (invaild argument)
than i enter apply update ...
than CMW_gt-s5570i.zip
and than it boots clockworkmod recovery v5.0.2.6
than i wipe data/catch and i enter instal zip form sd ... and i enter ss55570i-jblastv303. and than installation procces begins and it finishes and there writes official rom by avijit gohosh82 .... install from sdcard complete.
But when i reboot my phone it cant boot same as at begining. Than i again pres vol up + power + middle bottun and it loads android system recovery .... yes like from start. I tryed this multiple times with same result. Even tryed other roms and downloaded all files again.
Then i tryed with kies firmware recovery and it cant even recognize my phone.
Then i tryed ODIN and when i enter download mode odin doesnt recognize my phone , but when i enter android system recovery it recognize my phone but result is
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> DefaultCalDataWithBoot_S5570IXXKL4_REV03.tar.md5 is valid.
<OSM> PDA_S5570IXXKL4_REV03.tar.md5 is valid.
<OSM> MODEM_S5570IXXKL4_REV03.tar.md5 is valid.
<OSM> GT-S5570I-MULTI-CSC-OXXKL3.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
it is when i uncheck bootloader cuz when i check it it writes error ... guys pls help
Click to expand...
Click to collapse
pm me bro ...

Can anyone else besides akosicarlo. Carlo i expect more suggestions from you.

works
seamo123 said:
Is that rooting method good for GB 2.3.6 or is it for ICS only? I'm looking to root a Galaxy Mini GT-S5570 (not the S5570i 'plus' version) for a friend of mine that's running GB 2.3.6 and was wondering about the best & quickest way to do it. My own phone's a Sony Xperia Ray so there's obviously a few differences I have to get my head around!
Also, can one flash custom ROMS on the Samsung Mini without having to unlock the bootloader? And how does ICS run on this phone? (or does it?) Would you recommend upgrading or leaving it with GB 2.3.6?
Lastly, is there a PC Companion type application for Samsung where you can upgrade or repair the firmware? Might you have a link to it? - just in case things go badly wrong..
Click to expand...
Click to collapse
it works mate i just done it on my and its the GT-S55870
just hope ain t stealing my info or something else tho

seamo123 said:
Is that rooting method good for GB 2.3.6 or is it for ICS only? I'm looking to root a Galaxy Mini GT-S5570 (not the S5570i 'plus' version) for a friend of mine that's running GB 2.3.6 and was wondering about the best & quickest way to do it. My own phone's a Sony Xperia Ray so there's obviously a few differences I have to get my head around!
Also, can one flash custom ROMS on the Samsung Mini without having to unlock the bootloader? And how does ICS run on this phone? (or does it?) Would you recommend upgrading or leaving it with GB 2.3.6?
Lastly, is there a PC Companion type application for Samsung where you can upgrade or repair the firmware? Might you have a link to it? - just in case things go badly wrong..
Click to expand...
Click to collapse
Samsung Kies has an option to upgrade or repair the firmware. I got kies to save my bricked phone!!!!
And for the Galaxy mini GT-S5570, refer this link " http://forum.xda-developers.com/showthread.php?t=1347377 "
Hope it helps

akosicarlo said:
pm me bro ...
Click to expand...
Click to collapse
have the same problem. did you manage to solve it?

Same here looking for a clear guidelines then.

Lodaserves said:
Same here looking for a clear guidelines then.
Click to expand...
Click to collapse
guidelines for rooting s5570i?

ronhyukie07 said:
guidelines for rooting s5570i?
Click to expand...
Click to collapse
Yeah men

Lodaserves said:
Yeah men
Click to expand...
Click to collapse
Here download this Galaxy_pop_plus_root
then go to recovery mode ( turn off your phone and when it is turned off. Press Volume up+Home button+Power Button then when it open release the 3 buttons and wait for it to go in recovery mode.)
recovery mode is with the red text.
then go to install update on sdcard (the 2nd option stated) and choose that flashable zip (the one I linked to you to download)
it's not touchable so you must use the volume + and - to down and up and the power button to select.
then when you've select the flashable zip. Just go down and select the yes option. when it done already
reboot then wait for it. when it reboot and you are in the home screen of your phone. see the app drawer if you have superuser app that means you are rooted

Nice thanks for the link it helps alot!

Worked for me for the root. However, it is now impossible to boot into download mode.
After boot into recovery mode with adb, it is stuck in recovery mode, impossible to valid choice with the power button.
Impossible to boot in download mode with Jig too. Is this a bootloader problem? Any suggestion to boot into download mode or repair recovery mode?

[Q] rooted Gt7000 that I pressed update firmware,now not working . . please help

Hello All
I have a GT 7000 with stock 4.1.2 on it and it is only rooted.
It told me it had downloaded firmware update which i pressed install ( not knowing I shouldn't have because of my note being rooted) , and in doing so it is now just showing the little android dude with the blue thing in his tummy going round
Pressing volume up, home, power button won't do anything.
I can only get it into odin mode ( volume down, home, power button )
I am a complete noob and not sure what to do to get my note to work.
A friend said I need to flash a new rom via odin and I cant find a clear guide on how to do that.
For I can't afford to brick my note.
Please help
Kindest regards
pipsqueak 22 ooox

You have to have the samsung drivers installed for odin to work.
To get a stock rom google for sammobile. There are all official formwares (You will have to register).
After that extract that file, run odin and select the pda file (extracted md5 file).
Flash it. After reboot go to stock cwm and wipe data.
You should be fixed now.
Sent from note, a phone like never before

Odin is the way to go and the only way. Use this link http://forum.xda-developers.com/showthread.php?t=1901191 it will show how to flash Philz kernel on your phone and then you will have cwm. After that you will have to get a cwm flashable Rom out of the android dev section and put on your sd card, usb mass storage my work in philz kernel if so just put Rom on card and flash through cwm. Then phone will work or find a guide on pc Odin for flashing stock n7000 roms they are out there
Sent from my GT-N7000 using XDA Premium 4 mobile app

This just happened to me!!
Thanks jakuburban for your advice.
Though i didn't need to "After reboot go to stock cwm and wipe data." or maybe i do.
I just let it finish booting etc and everything was working fine,everything intact and okey dokey.
Can anyone say why this happened and what to do about updates in the future please?
Thanks again guys.:laugh:

Yeah, you sometimes don't need to wipe data. I told You to do this to be 100% sure it will work.
For the future, You can't use official update if You have root (normally it should give You information that You can't update the os because "Your device has been modified"), as You don't have original cwm and it won't boot into cwm to update Your os.
Sent from note, a phone like never before

Okey dokey.
Thanks again for the info.

Still having Trouble
Hi Guys,
Thanks heaps for your advice
I did what you said jakuburban but odin would get through seemmed like it was almost there then hung/froze
this is what was in the Odin txt box
"
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N5120XXCMI1_N5120VNZCMH5_N5120XXCMG7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection.."
and just hung/froze at that point well over an hour.
and unpluged it - can still only get into odin mode
Not sure what to do?
Is this where I have to flash a hole new Rom?
Im not sure how to do this as I was looking at putting cyanogenMod rom on but I was reading some where not all rom's come in .tar forms
and I downloaded the latest stable rom from cyanogenMod but it is a . zip
so im not sure what to do there?
Thanks heaps
pipsqueak 22

Hanging at that place means there is some problem with the connection between note and pc. Make sure you have all the drivers installed and use original USB cable and main USB ports.
zip file roms need to be installed using clockwork mod recovery.

nokiamodeln91 said:
Hanging at that place means there is some problem with the connection between note and pc. Make sure you have all the drivers installed and use original USB cable and main USB ports.
zip file roms need to be installed using clockwork mod recovery.
Click to expand...
Click to collapse
yes I Used the origianl USB cable and have the latest Usb driver
turned off my firewall and antivirus softwared ( on work desktop)
then tryed on my laptop using kies USB driver - still no luck
ooo

Pipsqueak22 i've PM'd ya.
Yes you WILL be flashing a new ROM in Odin.
Make sure it's the right ROM you need.:good:

Raggerty64 said:
Pipsqueak22 i've PM'd ya.
Yes you WILL be flashing a new ROM in Odin.
Make sure it's the right ROM you need.:good:
Click to expand...
Click to collapse
Thanks ooo

[Q] Is the phone bricked or what?

Hello readers,
MY girlfriend decided that she wanted a costum ROM on her n7000. So she looked up how to do it on YouTube...
What she Tried to do was flash a kernel in stock recovery. She was on a ICS stock ROM, not rooted. And what she got was a phone that only went into download mode. When i turned it on it was stuck in the samsung screen. booting intoo recovery dint respond. Then she came to me. So i read on the xda forums that this might result in a bricked phone.
When i got it i tried tot flash speedmod 3k v13 kernel. Via PC Odin. It all completed normaly but the reboot (I know Odin a bit since i flash roms since the Sgs1 and now i still have an Sgs3.)
The problem we have now is that the cwmr v5.8.1.8 doesnt see the external SD. so i cant flash a rom of the sd. But now i am not shure if this is the emmc brick or my recovery doesnt support flashing from external SD cards. The SD card is good, tested it.
So if anyone knows what the best step from here is, please share it. I'm thinking about scanning For Bicked blocks. But i have never gone so far in computing. So im a bit scared of it.. XD Might reflash the kernel or update cwmr.

Download a stock Rom and try to install it with PC Odin.
If it stops with an error at factoryfs.img it is bricked.
If it succeeds you have a solid base for installing a Custom Rom (even if it is for your girl I wouldn't use a "costum" Rom).

ronnos said:
Hello readers,
MY girlfriend decided that she wanted a costum ROM on her n7000. So she looked up how to do it on YouTube...
What she Tried to do was flash a kernel in stock recovery. She was on a ICS stock ROM, not rooted. And what she got was a phone that only went into download mode. When i turned it on it was stuck in the samsung screen. booting intoo recovery dint respond. Then she came to me. So i read on the xda forums that this might result in a bricked phone.
When i got it i tried tot flash speedmod 3k v13 kernel. Via PC Odin. It all completed normaly but the reboot (I know Odin a bit since i flash roms since the Sgs1 and now i still have an Sgs3.)
The problem we have now is that the cwmr v5.8.1.8 doesnt see the external SD. so i cant flash a rom of the sd. But now i am not shure if this is the emmc brick or my recovery doesnt support flashing from external SD cards. The SD card is good, tested it.
So if anyone knows what the best step from here is, please share it. I'm thinking about scanning For Bicked blocks. But i have never gone so far in computing. So im a bit scared of it.. XD Might reflash the kernel or update cwmr.
Click to expand...
Click to collapse
I would first go to PhilZ thread
http://forum.xda-developers.com/showthread.php?p=31911620
Look for a kernel for ICS, any of the version 3.99 should do. Choose the tar file to flash it via odin. After that try go into recovery again to see if it works.
Sent from my phone.

forest1971 said:
I would first go to PhilZ thread
http://forum.xda-developers.com/showthread.php?p=31911620
Look for a kernel for ICS, any of the version 3.99 should do. Choose the tar file to flash it via odin. After that try go into recovery again to see if it works.
Sent from my phone.
Click to expand...
Click to collapse
Thank u for the reply. I will try it. I will keep u updated!

forest1971 said:
I would first go to PhilZ thread
http://forum.xda-developers.com/showthread.php?p=31911620
Look for a kernel for ICS, any of the version 3.99 should do. Choose the tar file to flash it via odin. After that try go into recovery again to see if it works.
Sent from my phone.
Click to expand...
Click to collapse
I tryed it, and it didnt flash. this is what i got:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PhilZ-cwm6-XXLT5-OXX-5.03.0.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Can u make anything of that?

It does not look good at all. I would try again with PhilZ 3.99 tar file.
Sent from my phone.

forest1971 said:
It does not look good at all. I would try again with PhilZ 3.99 tar file.
Sent from my phone.
Click to expand...
Click to collapse
Oke, so i un-installed kies, and un-installed the phone drives from my pc, then installed the drivers from the ''stock rom n7000'' post. i flashed the kernel again using odin for pc, gues what, it worked!
The booted up normaly and it also uses philz touch recovery normaly.
I installed the App root checker, and i have root acces.
Now i can just flash towards anything i want right? becuase i am now on a safe kernel?
Thanks alot for your help!

Good to know you can get back to safety. Yes. Just nees to read and follow rom installation guide carefully from respective rom that you want.
Sent from my phone.

forest1971 said:
Good to know you can get back to safety. Yes. Just nees to read and follow rom installation guide carefully from respective rom that you want.
Sent from my phone.
Click to expand...
Click to collapse
just flashed CM9.1 and its all good!!
I'm so happy, and my girlfriend says thanks!

ThaiDai said:
Download a stock Rom and try to install it with PC Odin.
If it stops with an error at factoryfs.img it is bricked.
If it succeeds you have a solid base for installing a Custom Rom (even if it is for your girl I wouldn't use a "costum" Rom).
Click to expand...
Click to collapse
thank u for your reply, but i fixed it whith the help of the other poster.
thanks again.

Flash cm 10.2, its newer & better
GT-N7000 cihazımdan Tapatalk 2 ile gönderildi

maktama said:
Flash cm 10.2, its newer & better
GT-N7000 cihazımdan Tapatalk 2 ile gönderildi
Click to expand...
Click to collapse
I will. Thanks.

Downgrade advice after latest Lollipop Upgrade

I've been reading a few threads but since I have an AT&T Note 3 there seems to be a ton of jargon I'm having a hard time picking up on, I've done a few previous Android phones but those seemed to have a guide where everything was exactly what I had and it just worked step by step. I have a fully stock Note 3
Baseband version:
N900AUCUEOC2
Kernel version
3.4.0-4335446
[email protected] #1
Fri July 31 21:47:49 KST 2015
Build Number:
LRX21V.N900AUCUEOC2
Every OTA update something seems to happen on this Note 3, GPS issues on one, battery on another and now it's Wifi issues along with missing text messages. (both of which suck the most). I've never rooted or flashed this phone, either I would like to go back to 4.4.2 or maybe try another rom but I'm having a real hard time figuring out all the steps since it seems any time there's an update they all change, towelroot, safestrap, kingo root, heimdall, MJ5, etc hell are the notes in the main post for AT&T Samsung Galaxy Note 3 All-In-One Resource Thread still good?
Basically I figure I would take it back to 4.4.2 and run that for a month and see if texting, gps and battery are stable, that's my big three. Getting rid of the Samsung bloat and flashing a new rom are secondary at this point. I've done the whole wipe and factory reset the phone a few times but I still can't shake this texting bug where sometimes it silently stops working, tried the built in Messaging app, switched to Google Messenger and even tried Handcent and Go SMS Pro with the same results, texts stop coming in randomly, I can send out but replies never show up and rebooting the phone doesn't cause them to show up, they are just gone but a reboot will restore the ability to receive texts.

Hello. It seems you have a few different options, since your on N900AUCUEOC2, which is the same thing as N900AUCUEOC1, but with an update that patches Stagefright, you can downgrade and upgrade to pretty much anything you want.
What you need to know:
SuperSU is the super user you will use.
Safestrap is the ONLY bootloader that you can use.
Towelroot will root 4.4.2 and below.
You make sure Busybox gets installed before installing Safestrap.
Click to expand...
Click to collapse
Download and Install to your computer:
Code:
[URL="http://odindownload.com/"]http://odindownload.com/[/URL] <--- Odin
[URL="http://odindownload.com/SamsungUSBDriver/USB_Drivers_1.5.27.0.rar"]http://odindownload.com/SamsungUSBDriver/USB_Drivers_1.5.27.0.rar[/URL] <--- Samsung USB Drivers
Download and place on your Desktop.
Code:
[URL="https://www.androidfilehost.com/?fid=95784891001615211"]https://www.androidfilehost.com/?fid=95784891001615211[/URL] <--- 4.4.2 (N900AUCUCNC2)
Download Towelroot and Safestrap on your SD card.
Code:
[URL="https://www.androidfilehost.com/?fid=23681161096070831"]https://www.androidfilehost.com/?fid=23681161096070831[/URL] <--- Towelroot
[URL="https://www.androidfilehost.com/?fid=95832962473398959"]https://www.androidfilehost.com/?fid=95832962473398959[/URL] <--- Safestrap
Download busybox and SuperSU off the playstore.
Code:
[URL="https://play.google.com/store/apps/details?id=stericson.busybox&hl=en"]https://play.google.com/store/apps/details?id=stericson.busybox&hl=en[/URL] <--- Busybox
[URL="https://play.google.com/store/apps/details?id=eu.chainfire.supersu&hl=en"]https://play.google.com/store/apps/details?id=eu.chainfire.supersu&hl=en[/URL] <--- SuperSU
1. Back everything up that you don't want to lose, then perform a factory reset before proceeding to step 2.
2. Start odin and connect your phone to your computer.
* Odin should display 0:[COM4] and
Code:
<ID:0/004> Added!!
in the log box.
3. Load N900AUCUCNC2 into the AP slot of Odin.
* The below output should display in the log.
Code:
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
4. Click start and wait awhile, your phone will eventually boot into 4.4.2.
5. Navigate through the startup menus.
6. Install Towelroot off your SD card.
7. "Make it rain." and you'll have root.
8. Download and install SuperSU off the playstore.
9. Download and install Busybox off the playstore.
10. Install Safestrap off your SD card.
11. Enjoy stock 4.4.2 with root.

Want to downgrade from EOC2 Lollipop to NC2 Kitkat
Phlashb4k said:
Hello. It seems you have a few different options, since your on N900AUCUEOC2, which is the same thing as N900AUCUEOC1, but with an update that patches Stagefright, you can downgrade and upgrade to pretty much anything you want.
What you need to know:
Download and Install to your computer:
Code:
[URL="http://odindownload.com/"]http://odindownload.com/[/URL] <--- Odin
[URL="http://odindownload.com/SamsungUSBDriver/USB_Drivers_1.5.27.0.rar"]http://odindownload.com/SamsungUSBDriver/USB_Drivers_1.5.27.0.rar[/URL] <--- Samsung USB Drivers
Download and place on your Desktop.
Code:
[URL="https://www.androidfilehost.com/?fid=95784891001615211"]https://www.androidfilehost.com/?fid=95784891001615211[/URL] <--- 4.4.2 (N900AUCUCNC2)
Download Towelroot and Safestrap on your SD card.
Code:
[URL="https://www.androidfilehost.com/?fid=23681161096070831"]https://www.androidfilehost.com/?fid=23681161096070831[/URL] <--- Towelroot
[URL="https://www.androidfilehost.com/?fid=95832962473398959"]https://www.androidfilehost.com/?fid=95832962473398959[/URL] <--- Safestrap
Download busybox and SuperSU off the playstore.
Code:
[URL="https://play.google.com/store/apps/details?id=stericson.busybox&hl=en"]https://play.google.com/store/apps/details?id=stericson.busybox&hl=en[/URL] <--- Busybox
[URL="https://play.google.com/store/apps/details?id=eu.chainfire.supersu&hl=en"]https://play.google.com/store/apps/details?id=eu.chainfire.supersu&hl=en[/URL] <--- SuperSU
1. Back everything up that you don't want to lose, then perform a factory reset before proceeding to step 2.
2. Start odin and connect your phone to your computer.
* Odin should display 0:[COM4] and
Code:
<ID:0/004> Added!!
in the log box.
3. Load N900AUCUCNC2 into the AP slot of Odin.
* The below output should display in the log.
Code:
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
4. Click start and wait awhile, your phone will eventually boot into 4.4.2.
5. Navigate through the startup menus.
6. Install Towelroot off your SD card.
7. "Make it rain." and you'll have root.
8. Download and install SuperSU off the playstore.
9. Download and install Busybox off the playstore.
10. Install Safestrap off your SD card.
11. Enjoy stock 4.4.2 with root.
Click to expand...
Click to collapse
@phlashb4k: Hay there, i have something like the same question but my scenario is quit different,
i have an AT&T Note 3 running EOC2 now but i have installed it with the help of "FlashFire", (as far as i live in a country other than USA/non AT&T country so i could not get OTA updates, hence i had to find manual ways to update to OC2. And as you know FlashFire needs root so, my device is rooted now and shows a padlock on startup but i don't have any custom recovery installed.
NOW i want to remove root and go stock everything (bcz now i know that i can install that OTA.zip with the help of adb),
As far as i want to remove root access i think going to superSU settings and clicking on full unroot would do the job, am i right?
and than because i have (N900AUCUEOC1_N900AATTEOC1_N900AUCUEOC1_HOME.tar.md5) file so i think i will have to simply odin start and AP file the above tar and connect my phone, after added shows i press start button and everything goes will, is it right?

I was wondering if its possible to go back to jellybean? im on 4.4.2?

Sorry I've been busy!
talvigi said:
@Phlashb4k: Hay there, i have something like the same question but my scenario is quit different,
i have an AT&T Note 3 running EOC2 now but i have installed it with the help of "FlashFire", (as far as i live in a country other than USA/non AT&T country so i could not get OTA updates, hence i had to find manual ways to update to OC2. And as you know FlashFire needs root so, my device is rooted now and shows a padlock on startup but i don't have any custom recovery installed.
NOW i want to remove root and go stock everything (bcz now i know that i can install that OTA.zip with the help of adb),
As far as i want to remove root access i think going to superSU settings and clicking on full unroot would do the job, am i right?
and than because i have (N900AUCUEOC1_N900AATTEOC1_N900AUCUEOC1_HOME.tar.md5) file so i think i will have to simply odin start and AP file the above tar and connect my phone, after added shows i press start button and everything goes will, is it right?
Click to expand...
Click to collapse
Hey man. Just saw your post, sorry about the late reply, I've been really busy with college. Are you still needing help or did you get everything taken care of? Let me know

Some help here please.
If i do this, if i downgrade 5.0 to 4.4.2 then can i upgrade to a custom rom, like Cyanogenmod? i buy a note 3 SM n900a ATT and i use in my contry Honduras, i want to root and instal custom ROM. does IT HELP?

satiacums said:
I was wondering if its possible to go back to jellybean? im on 4.4.2?
Click to expand...
Click to collapse
Once your on kitkat or lp there's no going back to jelly bean

Does anyone know if there is a video tutorial on how to do this? I'm a squid it won't be my first time rooting a device and I really don't want to break my phone. Also once I get back to KitKat lop able to run custom roms?

great thread zombie

jacky37 said:
Once your if you're on on kitkat or lp there's no going back to jelly bean
Click to expand...
Click to collapse
If ur on eoc2, how can u downgrade to lp or KitKat?
---------- Post added at 09:21 AM ---------- Previous post was at 08:57 AM ----------
phlashb4k said:
Hello. It seems you have a few different options, since your on N900AUCUEOC2, which is the same thing as N900AUCUEOC1, but with an update that patches Stagefright, you can downgrade and upgrade to pretty much anything you want.
What you need to know:
Download and Install to your computer:
Code:
[URL="http://odindownload.com/"]http://odindownload.com/[/URL] <--- Odin
[URL="http://odindownload.com/SamsungUSBDriver/USB_Drivers_1.5.27.0.rar"]http://odindownload.com/SamsungUSBDriver/USB_Drivers_1.5.27.0.rar[/URL] <--- Samsung USB Drivers
Download and place on your Desktop.
Code:
[URL="https://www.androidfilehost.com/?fid=95784891001615211"]https://www.androidfilehost.com/?fid=95784891001615211[/URL] <--- 4.4.2 (N900AUCUCNC2)
Download Towelroot and Safestrap on your SD card.
Code:
[URL="https://www.androidfilehost.com/?fid=23681161096070831"]https://www.androidfilehost.com/?fid=23681161096070831[/URL] <--- Towelroot
[URL="https://www.androidfilehost.com/?fid=95832962473398959"]https://www.androidfilehost.com/?fid=95832962473398959[/URL] <--- Safestrap
Download busybox and SuperSU off the playstore.
Code:
[URL="https://play.google.com/store/apps/details?id=stericson.busybox&hl=en"]https://play.google.com/store/apps/details?id=stericson.busybox&hl=en[/URL] <--- Busybox
[URL="https://play.google.com/store/apps/details?id=eu.chainfire.supersu&hl=en"]https://play.google.com/store/apps/details?id=eu.chainfire.supersu&hl=en[/URL] <--- SuperSU
1. Back everything up that you don't want to lose, then perform a factory reset before proceeding to step 2.
2. Start odin and connect your phone to your computer.
* Odin should display 0:[COM4] and
Code:
<ID:0/004> Added!!
in the log box.
3. Load N900AUCUCNC2 into the AP slot of Odin.
* The below output should display in the log.
Code:
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
4. Click start and wait awhile, your phone will eventually boot into 4.4.2.
5. Navigate through the startup menus.
6. Install Towelroot off your SD card.
7. "Make it rain." and you'll have root.
8. Download and install SuperSU off the playstore.
9. Download and install Busybox off the playstore.
10. Install Safestrap off your SD card.
11. Enjoy stock 4.4.2 with root.
Click to expand...
Click to collapse
.rar wont work in odin's ap slot dude.