Related
my Galasy s Plus i9001 , dont wont to turn on after i instal new room from recovery mode
Please advise what can i do now.
do you get into the download mode? hold power, vol-, home
then you can flash with odin
Still doesnt work
dr.wtf said:
do you get into the download mode? hold power, vol-, home
then you can flash with odin
Click to expand...
Click to collapse
I tried many times to download mode or recovery mode but no way it is not turn on , as it is doesnt have bateery,,,, please advise. Thanks in advance
mr_guitar_eg said:
I tried many times to download mode or recovery mode but no way it is not turn on , as it is doesnt have bateery,,,, please advise. Thanks in advance
Click to expand...
Click to collapse
See response in other thread:
If you are 100% sure you cannot enter download mode you really have a problem. Did you try checking the battery? And if you are 100% sure - search the forum, there's some posts about using a JIG to fix it, but most seem to have gone back to Samsung afaik...
What did you do to get your phone in this mode?! Give is some more info on what happened...
Thanks for your fast reply, please see the below details
First i rooted my device as xda wiki said,second i installed an arabic rom from the recovery mode, and it is installed succesfuly, and afterit roeboot, device not start, it seems dont have battery, no buttons work to wake up ths phone,,, any idea...???? I try to charged but nothing happened ,even the battery doesnt got hot,, Please advise,,,, thanks in advance
mr_guitar_eg said:
First i rooted my device as xda wiki said,second i installed an arabic rom from the recovery mode, and it is installed succesfuly, and afterit roeboot, device not start, it seems dont have battery, no buttons work to wake up ths phone,,, any idea...???? I try to charged but nothing happened ,even the battery doesnt got hot,, Please advise,,,, thanks in advance
Click to expand...
Click to collapse
Try removing the battery and charge cable for a while (at least 30 minutes or so). I've not heard this happened before... and try charging with another cable and/or with another charger (for instance a laptop or some other usb device)...
mr_guitar_eg said:
First i rooted my device as xda wiki said,second i installed an arabic rom from the recovery mode, and it is installed succesfuly, and afterit roeboot, device not start, it seems dont have battery, no buttons work to wake up ths phone,,, any idea...???? I try to charged but nothing happened ,even the battery doesnt got hot,, Please advise,,,, thanks in advance
Click to expand...
Click to collapse
Arabic rom ??
Sent from my GT-I9001 using xda premium
rayiskon said:
Arabic rom ??
Sent from my GT-I9001 using xda premium
Click to expand...
Click to collapse
Good catch. What ROM did you exactly try to install??
Gingerbread 2.3 arabic
I think the problem that it is for smsung galaxy s not s plus
nikagl said:
Good catch. What ROM did you exactly try to install??
Click to expand...
Click to collapse
It is a miui rom with arabic language! My phone is from hungary as i live there, so it is europan ,
mr_guitar_eg said:
I think the problem that it is for smsung galaxy s not s plus
Click to expand...
Click to collapse
Never install mods, addons, ROMs, kernels or anything made for whole Another phone.
Yes, that's the problem. I'm very sorry to tell you but you just destroyed your phone's boot.img by installing wrong one. And the wrong boot.img wont let you do anything on your phone. There's no way you could enter to recovery or download mode or anything.
I have no idea about the JIG thing but when I hard bricked my phone, I took it to the reseller and got it fixed for free of charge
Is there a golden card method
Any idea if there is a golden card method to create an boot image to let the phone start again
mr_guitar_eg said:
Any idea if there is a golden card method to create an boot image to let the phone start again
Click to expand...
Click to collapse
Your phone is kind of dead now. You can't push a boot image to it 'cause computer doesn't recognize it properly. Bricked means your phone is just as useful as a brick. It wont turn on in any way and there's nothing else your phone would do.
The JIG costs only 2$ , if that doesn't get u into download mod then u can only revive ur phone with JTAG .
Sent from my GT-I9001 using xda premium
Any details about this 2 methods???
JIG on ebay...
http://www.ebay.pl/itm/USB-JIG-Dongle-unbrick-reset-mod-ROM-para-SAMSUNG-GALAXY-II-2-S2-i9100-ESPANA-/260928351223?pt=LH_DefaultDomain_186&hash=item3cc08aabf7
My advice is go see if u can repair it for free (warranty) , if not u can try the JIG to get u into download mode so u can flash via Odin (there are a lot of clips about JIGs on youtube) , if all that doesn't work JTAG is ur only hope (also there are videos about it on youtube).
Sent from my GT-I9001 using xda premium
Better Soluction
It ocurred me and I go to Movistar Shop and I said that it doesn't boot and I don't know anything and they give me another one with the guarantee.
Try and if not try with JIG ,
me 2, think you installed the wrong rom on the wrong phone..MIUEI rom is not out for the GT I9001, when i bricked my phone =1 medecin= www.broodplank.net (and check how to unbrick your I9001-article)
As the partition layout and even the filesystem is totally different I think you wiped away your bootloader and maybe also radio firmware. If this is your actual situation, it is ver very VERY unlikely you will get your phone alive with a jig. Don't know the partition layout of a 9000 but even the hardware is completely different. Not nucb hope left, very sorry.
Sent from my GT-I9001 using XDA App
Please help me out on this....
(Sorry if I posted in wrong section)
I successfully upgraded my Pop to gingerbread 2.3.6 and rooted it. It was working fine for some days after which It got messed up
when I updated the titanium backup app from the market. The app asked for some su permissions and suddenly the screen went blank.
After that I realized that its a hard bricked. The screen is blank whatever I do. I searched for many tutorials to unbrick it but no fruitful results yet.
I tried a lot to enter download mode and after several attempts luckily the three button combo worked and it got shown in ODIN on some port connected.
When I started the process of firmware upgrade it gets stuck in "Connection Setup Phase".
Does USB Jig method is worth trying in this situation ??
Pease tell me the solution of it. I am attaching the screenshot of the ODIN. Please Please Please help.
Thanks a lot in advance...
what is on your mobile screen download mode or something like phone--!--computer picture
ok whatever try this
close Odin, turn off mobile, start Odin and put files turn on mobile in download mode connect the cable and start flashing
PS : phone--!--conputer shows on the screen when upgrade get fail, not to worry it is just like another version of Odin
until you can light up the mobile its not a hard brick
I will suggest you to use firmware which are available without bootloader as you were previously on gb, just to remove the risk of hard brick
nothing on screen
yagnesh55 said:
Please help me out on this....
(Sorry if I posted in wrong section)
I successfully upgraded my Pop to gingerbread 2.3.6 and rooted it. It was working fine for some days after which It got messed up
when I updated the titanium backup app from the market. The app asked for some su permissions and suddenly the screen went blank.
After that I realized that its a hard bricked. The screen is blank whatever I do. I searched for many tutorials to unbrick it but no fruitful results yet.
I tried a lot to enter download mode and after several attempts luckily the three button combo worked and it got shown in ODIN on some port connected.
When I started the process of firmware upgrade it gets stuck in "Connection Setup Phase".
Does USB Jig method is worth trying in this situation ??
Pease tell me the solution of it. I am attaching the screenshot of the ODIN. Please Please Please help.
Thanks a lot in advance...
Click to expand...
Click to collapse
dheeraj (dhlalit11) said:
what is on your mobile screen download mode or something like phone--!--computer picture
ok whatever try this
close Odin, turn off mobile, start Odin and put files turn on mobile in download mode connect the cable and start flashing
PS : phone--!--conputer shows on the screen when upgrade get fail, not to worry it is just like another version of Odin
until you can light up the mobile its not a hard brick
I will suggest you to use firmware which are available without bootloader as you were previously on gb, just to remove the risk of hard brick
Click to expand...
Click to collapse
There is nothing shown on my screen...
no computer like symbol....
nothing whatever i do...
It just goes sometimes in download mode when the 3 button combos is pressed (very rarely), gets detected by ODIN but stucks on connection error...
yagnesh55 said:
There is nothing shown on my screen...
no computer like symbol....
nothing whatever i do...
It just goes sometimes in download mode when the 3 button combos is pressed (very rarely), gets detected by ODIN but stucks on connection error...
Click to expand...
Click to collapse
First of all delet all drivers on pc and install them new, just to be on the save side! Then get firmware for your country i suggest you to use 4file pack no the 1file ones! Then get odin v4.38 put your device in download mode and conect to pc put all 4files in the right place in odin and start flashing!! It should not take longer then 6min!! Let odin finish when you see blue pass disconect and be lucky!!
Sent from my GT-S5570 using xda premium
It Doesnt Help
galaxy mini said:
First of all delet all drivers on pc and install them new, just to be on the save side! Then get firmware for your country i suggest you to use 4file pack no the 1file ones! Then get odin v4.38 put your device in download mode and conect to pc put all 4files in the right place in odin and start flashing!! It should not take longer then 6min!! Let odin finish when you see blue pass disconect and be lucky!!
Sent from my GT-S5570 using xda premium
Click to expand...
Click to collapse
I tried this thing many times but still ODIN stucks on connection setup...
Also tried on different machine...
Please help....
yagnesh55 said:
I tried this thing many times but still ODIN stucks on connection setup...
Also tried on different machine...
Please help....
Click to expand...
Click to collapse
Have you tried using a different port? Or a different cable? Also, try unchecking the reset time option on ODIN.
tietganFTW said:
Have you tried using a different port? Or a different cable? Also, try unchecking the reset time option on ODIN.
Click to expand...
Click to collapse
there are two data cables of the same shape but their holes (which goes in mobile port) are of different size try the data cable whose hole is much big
I will try to post a pic
in short use the original Samsung one
1st try flashing cwm via odin n then wipe data wipe sd partition n then go to stock rom via odin
Flash Stock Rom for ur device using odin..... Please do not do any thing you area not aware of..
Files the steps and will make ur device ok
Click THANKS button if I helped, or u liked my post.
Will be honored.
dheeraj (dhlalit11) said:
there are two data cables of the same shape but their holes (which goes in mobile port) are of different size try the data cable whose hole is much big
I will try to post a pic
in short use the original Samsung one
Click to expand...
Click to collapse
ya I got ur point regarding the port size...
I m using the port of samsung original having big hole....
sanjay.ghanchi said:
1st try flashing cwm via odin n then wipe data wipe sd partition n then go to stock rom via odin
Click to expand...
Click to collapse
The screen is completely blank whatever I do so I cant do these steps ....
debanikonline said:
Flash Stock Rom for ur device using odin..... Please do not do any thing you area not aware of..
Files the steps and will make ur device ok
Click THANKS button if I helped, or u liked my post.
Will be honored.
Click to expand...
Click to collapse
Ya m flashing stock ROM using ODIN but it gets stuck on connection setup stage forever (see attached file)...
Please help...
Anyone having idea if USB jig work in this case...
yagnesh55 said:
Anyone having idea if USB jig work in this case...
Click to expand...
Click to collapse
USB jig only boots mobile in download mode
but you are saying you can sometimes boot in download mode so no use of USB jig is required
you should take it to samsung
Weird. I dont know how you could brick your phone with titanium backup app.
Your battery could be dead. Charge your phone for 2 hours.
Then try using Odin using a different USB Port.
chemicalrage said:
Weird. I dont know how you could brick your phone with titanium backup app.
Your battery could be dead. Charge your phone for 2 hours.
Then try using Odin using a different USB Port.
Click to expand...
Click to collapse
Nop I charged my battery full with another battery charger before using ODIN but still the problem persist.
I think I have to take it to Samsung service center but my warranty is over so I think they will take a huge amount
to fix it.
Anyone still having some idea on this...
Pease help...
yagnesh55 said:
Nop I charged my battery full with another battery charger before using ODIN but still the problem persist.
I think I have to take it to Samsung service center but my warranty is over so I think they will take a huge amount
to fix it.
Anyone still having some idea on this...
Pease help...
Click to expand...
Click to collapse
Dude We are On the Same Boat I Tryed Searching With All My resources But Now There Is Only 1 Option Left for Me to Visit to a Service Center
Service Centre Sucks
amxthan0 said:
Dude We are On the Same Boat I Tryed Searching With All My resources But Now There Is Only 1 Option Left for Me to Visit to a Service Center
Click to expand...
Click to collapse
I gave my phone to service centre (warranty is over ) before few days and they told than some connector in the circuit is damaaged and need to be replaced with new
one and its cost is 4278 INR . Can u believe that ??? 4278 bucks. Its better to buy a new phone.
yagnesh55 said:
I gave my phone to service centre (warranty is over ) before few days and they told than some connector in the circuit is damaaged and need to be replaced with new
one and its cost is 4278 INR . Can u believe that ??? 4278 bucks. Its better to buy a new phone.
Click to expand...
Click to collapse
You should have tried another stock firmware or another USB port when your phone luckily entered download mode. Same problem happene with me & get solved by flashing another stock firmware.
Sent Via XDA™ Premium
Galaxy_Rohit said:
You should have tried another stock firmware or another USB port when your phone luckily entered download mode. Same problem happene with me & get solved by flashing another stock firmware.
Sent Via XDA™ Premium
Click to expand...
Click to collapse
Tried every damn thing but ODIN gets stuck on connection setup step....
hello i've been trying 2 get a new rom for my brother's SGS+
but almost every rom i try (mostly jelly bean and ics roms but also some gb ones) give me n error
when i try 2 install them through recovery mode,
i get error status 7, installation aborted
now i looked for this problem on the internet and it appears there r some solutions found on this link:
http://www.knowtechbetter.com/how-t...ry-cwm-while-installing-flashing-custom-roms/
however i did not understand any of this
i m not new in installing roms and such but i m not very femilier with all these "more complicated" things
i noticed at the comments that the first solution helped someone
and it looks easy, if any1 could explain me shortly how do i do this this would be very helpful.
thanks~
Install newer CWM.. you have to ask this in the special thread made for it
broodplank1337 said:
Install newer CWM.. you have to ask this in the special thread made for it
Click to expand...
Click to collapse
i have faemod v1.2 based on cwm 5.0.2.7 ..
and honestly i dont know which threat you are reffering to
Cyanogenmod 10.. There is a link to CWM..
On the wiki page (see the index i made) you can also find CWM and an installation guide.
mrjraider said:
Cyanogenmod 10.. There is a link to CWM..
On the wiki page (see the index i made) you can also find CWM and an installation guide.
Click to expand...
Click to collapse
if u could help me just a little more, i cant find it.
Wiki link http://forum.xda-developers.com/wiki/Samsung_Galaxy_S_Plus/GT-I9001
mrjraider said:
Wiki link http://forum.xda-developers.com/wiki/Samsung_Galaxy_S_Plus/GT-I9001
Click to expand...
Click to collapse
thanks i managed 2 install cwm 6
but i encountered a new problem.
i installed the non-touch verision and now i cant do the "select" option
it is supposed 2 be the power button but it doesnt work
so now i cant do anything..
also i tried rom manager but it just opens recovery mode for me
any way i can return to an old verision of recovery w/o using the reovery mode so i can go back and install the touch verision this time?
There are more buttons to use. If i can remember you need to use the menu button
mrjraider said:
There are more buttons to use. If i can remember you need to use the menu button
Click to expand...
Click to collapse
tried them all.. i am really stuck here
appearntly alot of ppl have this problem.
is there any way to install it through odin or some other app?
Via odin install CWM 5.5.0.4.. See the wikilink i provided.. This one is stable and the homebutton is the choose button.
mrjraider said:
Via odin install CWM 5.5.0.4.. See the wikilink i provided.. This one is stable and the homebutton is the choose button.
Click to expand...
Click to collapse
maybe im doing it wrong but odin doesnt even recognise the file.. and there is no guide there
i did try a odin flashable cwm V6 but its stuck on "setup connection" each time i try..
Le tips:
- Patientce
- Remove and replug device
- Reboot device
- Use another USB port or cable
- Turn kies of (ctrl+alt+del > Taskmanager > Procesess > Terminate anything with KIES in its name)
- Turn AW/FW off
Just flash TWRP and you're good to go
Sent from my GT-I9001 using xda app-developers app
mrjraider said:
Le tips:
- Patientce
- Remove and replug device
- Reboot device
- Use another USB port or cable
- Turn kies of (ctrl+alt+del > Taskmanager > Procesess > Terminate anything with KIES in its name)
- Turn AW/FW off
Click to expand...
Click to collapse
dude im fricking out..
i accidently soft bricked it and now im trying 2 flash it back 2 stock with odin through your guide
but odin recognises my pc recognises the ops file as a text file so odin doesnt even see it...
u gotta help me ;_;
hey man relax... in wiki page you'll find cwm5.5.0.4 flashable zip and you can install it from recovery ( even from stock recovery if i remember corectly)... if you can't acces your phone you can copy it from pc to phone using recovery ( mounts and storage )... if you are stuck in recovery( you're phone boot in recovery only ) you'll need to flash the bootloader using odin.. also you can find the steps and necessary files in wiki and in cm10 by ivendor in firrst post ..Good Luck !!!
1: How did you softbrick it? What did you do, because I thought Odin got stuck??
2: You do see an Phone an ! and a PC?
3: You do have the latest ROM by Samsung and the correct AriesVE.ops?
If yes then we can get started. Follow my guide, when odin gets stuck at System (for a long long time > You know this because the green balk with time gets stuck) unplug device, reboot download again, reboot computer, and try again with BroodROM RC5 (see index)... (BroodROM RC5 is a last resort for our device since it has fixed many softbricked one including mine)
mrjraider said:
1: How did you softbrick it? What did you do, because I thought Odin got stuck??
2: You do see an Phone an ! and a PC?
3: You do have the latest ROM by Samsung and the correct AriesVE.ops?
If yes then we can get started. Follow my guide, when odin gets stuck at System (for a long long time > You know this because the green balk with time gets stuck) unplug device, reboot download again, reboot computer, and try again with BroodROM RC5 (see index)... (BroodROM RC5 is a last resort for our device since it has fixed many softbricked one including mine)
Click to expand...
Click to collapse
see the problem?
http://i39.tinypic.com/amp1ch.png
the thing is even tho i read your guide it seem like im doing something wrong..
for instance when i add the files both ops and "one package" file it doesnt see them so i have to write their location
shahaf321 said:
dude im fricking out..
i accidently soft bricked it and now im trying 2 flash it back 2 stock with odin through your guide
but odin recognises my pc recognises the ops file as a text file so odin doesnt even see it...
u gotta help me ;_;
Click to expand...
Click to collapse
aaaand that's what happens when you start flashing random stuff to your phone without knowing what you actually do...
Ok, I wont tease you or anything, here is what to do:
READ THIS
THIS (all stuff from there, doesn't matter if you don't consider it necessary, you surely will in the future)
After you read all those and understand everything, flash back to stock using @mrjraider tutorial, it's a clear step by step one so follow every step.
Now, the thing is that you'll need CWM Recovery, not FeaMod which is only able to flash GB ROM's.
The most stable CWM recovery is CWM 5.5.0.4 you can find it at the bottom of the OT from this thread
HERE is how to flash CWM with Odin.
Please, pay attention and don't rush things up. And next time you have a problem post in an appropriate thread don't open a new one and especially not in the dev section, see this
Also, no user "gotta help you" you've chose to flash tings to your phone, if you mess it up, it's your own failure and nobody 'MUST' help you... (see this)
educk said:
aaaand that's what happens when you start flashing random stuff to your phone without knowing what you actually do...
Ok, I wont tease you or anything, here is what to do:
READ THIS
THIS (all stuff from there, doesn't matter if you don't consider it necessary, you surely will in the future)
After you read all those and understand everything, flash back to stock using @mrjraider tutorial, it's a clear step by step one so follow every step.
Now, the thing is that you'll need CWM Recovery, not FeaMod which is only able to flash GB ROM's.
The most stable CWM recovery is CWM 5.5.0.4 you can find it at the bottom of the OT from this thread
HERE is how to flash CWM with Odin.
Please, pay attention and don't rush things up. And next time you have a problem post in an appropriate thread don't open a new one and especially not in the dev section, see this
Also, no user "gotta help you" you've chose to flash tings to your phone, if you mess it up, it's your own failure and nobody 'MUST' help you... (see this)
Click to expand...
Click to collapse
i did try using his guide and i folowed it step by step
my only problem is that odin gives me that message i showed in my last post..
also untill i fix this soft brick i cant move on to recovery mode so
i need 2 fix that first..
the guide doesnt show anything related to what im doing wrong..
Someone with brains would have removed odin, and the ops file and redownloaded it again. Also save those on your desktop
Hey everyone currently experiencing this semi-bricked as it still recognized on my pc, here's details situations i faced.. Running official V6 , it stuck & freeze on MI logo, i decided to power it off, ive checked the battery before that freeze was about 53%, after that the phone won't even power up no led, try to entering recovery (no luck), trying to access fastboot mode (no luck), downloading MiflashTool and reads every tutors&articles till now nothing work, i connected to pc redlight appeared for a while, i saw that installing driver (usb input installed), then i press the whole button (power+vol-up/down its installing driver (Qhsuab_dload installed) but no luck when try to flash it with miflashtool.. I really need some help to unbrick this devices, any help&suggestions would be appreciated. Thanks
I put some pictures so you guys know what am faces
Some pictures here
Hum wow, had you resized your partitions?
I should have a sugestion, but it may not please you...
Here it is : http://en.miui.com/thread-73348-1-1.html
But before trying it just wait for other replies.
Regards and good luck.
Its done at 2nd try sir, but still no luck bro..usb port recognized but won't flash it throw me to some errors, see on Q&A for logs
SH1M4BD3 said:
Its done at 2nd try sir, but still no luck bro..usb port recognized but won't flash it throw me to some errors, see on Q&A for logs
Click to expand...
Click to collapse
How about this?
How to Unbreak Xiaomi Mi 3 (soft break) - No need to open back cover -*http://en.miui.com/thread-84669-1-1.html
No luck broo fail..ok i sold..this crap
SH1M4BD3 said:
No luck broo fail..ok i sold..this crap
Click to expand...
Click to collapse
This CRAP haha had this happend to me it is a fully bricked phone u could fix it up by opening the phone and connecting some testpoints when flashing (tutorial on miui forum).
I sent it to repair as this same thing happend to me basically the "memory block" got bricked.
You know its just not make sense, i used it normally, not even yet try to root or flashing something, its fully stock, upgrading once..i used it about 2months normal use, but suddenly facing this, come on ..
Well this is what happend when I upgraded my version of MIUI through fastboot. Not sure how u got this but that is what it means as I had this too.
Latest update i always done was an ota stable one and am sure that was recovery way
Hey guys, I am in a big fuss here, I was flashing new MIUI MM 6.0 and it was taking to long to flash.. I was very sleepy then and I accidentally fell a sleep. The battery was at 88% when I started doing it. So I guess the flashing must have finished by the time the battery ran out.
Now I have kept it for charging for over 2 hours and it dint turn on. Then I tried going to fastboot or recovery, dint work. Then I connected it to the PC to see if the phone is on but the display is somehow dead and WALLA!!! It gets connected. BUT there is a catch, it now shows me SIX different drives out of which 2 drives I can access. I dont know whats going on! Someone please help me. I have to travel 450 km for service center.
del
same problem bro.. how is your mi3 now?
Looks like partition has messed up. Before flashing that MIUI sh*t were you on extended partition table?
http://forum.xda-developers.com/xiaomi-mi-3/general/guide-instruction-to-restore-mi4-mi3-t3279927
Please see this link, it might help...
anshude1 said:
http://forum.xda-developers.com/xiaomi-mi-3/general/guide-instruction-to-restore-mi4-mi3-t3279927
Please see this link, it might help...
Click to expand...
Click to collapse
same problem here, I flashed SMIUI it says cant mount /dev/block/platform/msm_sdcc,. I just let on that screen, and it displays installing SMIUI system. It finishes but phone died after that.
Now same problem with the OP, no power, no fastboot mode, no recovery, when connect to a pc it displays many Drive windows. Please help.
Now I managed to removed the battery still the same no power.
Help please guys.
i have a perfect solution for this problem....100%working...now u have to flash a fastboot rom using mi flash tool from PC.....u can search it on google or u wanna know exact details then u can mail [email protected]
Faced same problem (soft brick) , steps followed to fix it
Connected to PC to check if the phone is still alive or hard bricked (yep it was , i got a lot of new driver pop ups)
I went through some MIUI forum and understood that MM roms have script which changes partition size over stock partition , hence the soft brick if u flash it in extended partition
Downloaded an old fast boot room (MIUI 7 kitkat) and tried to flash it using MIflash tool , but faced another issue in WIN 10 OS.
To fix it had to install latest qualcomm drivers for MI3 and flashed the rom in Safe mode(win10).
Now you can either flash fastboot rom or recovery zip after you change the recovery.
andy96singh said:
i have a perfect solution for this problem....100%working...now u have to flash a fastboot rom using mi flash tool from PC.....u can search it on google or u wanna know exact details then u can mail [email protected]
Click to expand...
Click to collapse
This is a public forum buddy, people aren't playing hide and seek here. So if you've solution or any tips,please share it here or provide a valid link so the user can get touch with it. Yes, google is everyone's friend, but do not ask the user to send email for solution.