Database Develop

Cyanogenmod 9 vs other builds ( i.e. Ics stunner )

Can somebody please explain the difference? Why is everybody hyped about cm9?
Thanks in advance
Sent from my GT-N7000 using xda premium

nbyz said:
Can somebody please explain the difference? Why is everybody hyped about cm9?
Thanks in advance
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
I don't know but probably will know soon
http://opendesign.blamesamsung.org/

Guess i got to wait till 10th of may..the newer os as stated is not relevant to my question, because other custom roms like stunner have this aswell
Sent from my GT-N7000 using xda premium

nbyz said:
Can somebody please explain the difference? Why is everybody hyped about cm9?
Thanks in advance
Click to expand...
Click to collapse
The principle difference between CM9 and all other ICS releases is that CM9 contains a safe custom kernel.
Everything else ICS-based uses leaked LP1, LP5 and LP6 kernels which can potentially brick or harm your phone.
However, there are two CM9 Roms here in Development:
imilka's CM9 (discontinued, coming with unreliable kernel)
official CM9 (safe)

And speedwise? Is the latest (build 3) as fast / faster than ics stunner ? Thanks btw for the fast and helpfull replies!
Sent from my GT-N7000 using xda premium

nbyz said:
And speedwise? Is the latest (build 3) as fast / faster than ics stunner ? Thanks btw for the fast and helpfull replies!
Click to expand...
Click to collapse
CM9 is every bit as fast as Stunner IMO, but has a bit less customization features.

chasmodo said:
CM9 is every bit as fast as Stunner IMO, but has a bit less customization features.
Click to expand...
Click to collapse
Please chasmodo you are tempting me to delve into ics yet again lol I returned to gb cause of the bricks again bit now cm9 kernel is safe aaahhh I think I'm going to be busy tonight
Can I ask with it not been a Chinese leak then where is it fro sgs2??
Thanks

Is the tablet mode included ?

brockyneo said:
Please chasmodo you are tempting me to delve into ics yet again lol I returned to gb cause of the bricks again bit now cm9 kernel is safe aaahhh I think I'm going to be busy tonight
Can I ask with it not been a Chinese leak then where is it fro sgs2??
Thanks
Click to expand...
Click to collapse
As I understand it, it was built using SGS2 sources.
And it runs wonderfully, Brocky, I can tell you that.
---------- Post added at 12:25 PM ---------- Previous post was at 12:24 PM ----------
nbyz said:
Is the tablet mode included ?
Click to expand...
Click to collapse
Yes, you can change the DPI to 213 or less from the settings, reboot and have your nice little tablet.

I just read about the danger of leaked kernels :
If you are running an affected kernel:
STOP USING IT IMMEDIATELY. FLASH A SAFE KERNEL USING ODIN/HEIMDALL.
DO NOT wipe in recovery
DO NOT flash anything else in recovery
In general, DO NOT use recovery at all
I'm on ics stunner 1.4.26.1 with the leaked kernel stated below and want to go to cm9 but i read this :
- DON'T flash FROM i9220 LEAKED REPACK!
So can somebody explain what i need to flash before i can flash cm9 ??

nbyz said:
I just read about the danger of leaked kernels :
If you are running an affected kernel:
STOP USING IT IMMEDIATELY. FLASH A SAFE KERNEL USING ODIN/HEIMDALL.
DO NOT wipe in recovery
DO NOT flash anything else in recovery
In general, DO NOT use recovery at all
I'm on ics stunner 1.4.26.1 with the leaked kernel stated below and want to go to cm9 but i read this :
- DON'T flash FROM i9220 LEAKED REPACK!
So can somebody explain what i need to flash before i can flash cm9 ??
Click to expand...
Click to collapse
You need to flash a stock GB ROM using PC Odin exclusively
And after wards root and install cm9 via cwm
N.B :if you use your stunner recovery for any sort of flash or wipe ,you'll risk bricking your phone
So please use PC ODIN to return to GB

does anyone has a link for a GB rom that is usable with odin??

nbyz said:
does anyone has a link for a GB rom that is usable with odin??
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1424997

[Q] Is CM9 and Roms based on CM9 safe to flash?

Hello guys,
Just wanted to know if CM9, Asylum ICS 04, PARANOIDANDROID v0.1 are safe to flash...
What kernels are this roms using?
Could I make use of wipe features in this roms without bricking my phone?
Right now, Im in Stock Rooted GB LC2..
Thanks

ivan0550 said:
Hello guys,
Just wanted to know if CM9, Asylum ICS 04, PARANOIDANDROID v0.1 are safe to flash...
What kernels are this roms using?
Could I make use of wipe features in this roms without bricking my phone?
Right now, Im in Stock Rooted GB LC2..
Thanks
Click to expand...
Click to collapse
Yes they r safe and u r able to use the wipe features
Noted From My G.NOTE Using XDA Premium

Thanks for the answer.. At least I will be able to use ICS without risking my phone

ivan0550 said:
Hello guys,
Just wanted to know if CM9, Asylum ICS 04, PARANOIDANDROID v0.1 are safe to flash...
What kernels are this roms using?
Could I make use of wipe features in this roms without bricking my phone?
Right now, Im in Stock Rooted GB LC2..
Thanks
Click to expand...
Click to collapse
As said earlier, they are completely safe to flash. All of them contain custom CM9 kernel built using the safe SGS2 source code.

chasmodo said:
As said earlier, they are completely safe to flash. All of them contain custom CM9 kernel built using the safe SGS2 source code.
Click to expand...
Click to collapse
From the mouth of the pro.... i present u Chasmodo!!!!!!!
Noted From My G.NOTE Using XDA Premium

Hi i am a newbiew but i desperately want ics but a safe icsso here u guys confirmed these specific ics roms cm9 etc are safe and u can factory reset and all without any bricking issue..
So which is the best ics rom from these 4?
And since i am a total newbie so where can i get the guide for installing these rom on my note?
Details about my note is its on stocl gb rom and i mever rooted it as ibought it few weeks ago. .
Sent from my GT-N7000 using Tapatalk 2

The best is the one that fits your needs, and we can't say that to you ^^

aliaskari said:
Hi i am a newbiew but i desperately want ics but a safe icsso here u guys confirmed these specific ics roms cm9 etc are safe and u can factory reset and all without any bricking issue..
So which is the best ics rom from these 4?
And since i am a total newbie so where can i get the guide for installing these rom on my note?
Details about my note is its on stocl gb rom and i mever rooted it as ibought it few weeks ago. .
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
Firstly,
u need to know what GB u r on..
Go to Settings, About phone... Once u know,
follow this guide to root ur phone...
http://forum.xda-developers.com/showthread.php?t=1424997
Once u are rooted, the rest is easy...
- CM9 : http://forum.xda-developers.com/showthread.php?t=1627854
- ParanoidAndroid : http://forum.xda-developers.com/showthread.php?t=1662802
- Asylum ICS : http://forum.xda-developers.com/showthread.php?t=1650413
***Do take some time to read the OP, ie the 1st post of every thread posted by each individual developer to have a better understanding of the ROM u decided to flash...
Instructions are clearly written in it also... Do take MORE time to read...
Cheers and may the force be with u!!!

Thanks aloot. . Will do as u say
I will read it countless times so i can almost memorize it thanks alooot cheers
Sent from my GT-N7000 using Tapatalk 2

[q] safe kernel for xxlq2 ics

Hi Friends,
I flashed my SGN N7000 with stock ICS rom XXLQ2. I noticed in the xda forum stock ICS rom has a e_mmc fault and can be cause heard brick.
Could anyone suggest me a safe kernel which I can full wipe/ reset facrory and all other recovery options without any fear.
I'm looking forward your earlier response since me new to this android..
Kind Regards

Speedmod or Abyss are known to be safe.

Any 2.3.5 kernel is safe.
Go to here:
http://forum.xda-developers.com/showthread.php?t=1424997
Download a GB 2.3.5 kernel, and you got yourself a brand new phone. Did the same 2 days ago to go to Paranoid Android ROM v0.4. Can recommend this, I'm very happy with it.

To do this check out this tutorial by me here: https://www.youtube.com/watch?v=o5K5Wm_201Y&feature=plcp

azzledazzle said:
Speedmod or Abyss are known to be safe.
Click to expand...
Click to collapse
thanks for your reply after flashing SpeedMod kernal can i do the full wipe/ factory reset etc..

endingcolt007 said:
To do this check out this tutorial by me here: https://www.youtube.com/watch?v=o5K5Wm_201Y&feature=plcp
Click to expand...
Click to collapse
Useful video man.. very helpful to solve my issue..

mjrifath said:
Useful video man.. very helpful to solve my issue..
Click to expand...
Click to collapse
I can recommend the Goku Kernel. It's based on Speedmod but comes with a few extras like additional cpu governors... And even the latest beta is stable. What's more funky81 is actively developing his kernel.
By the way because it's based on Speedmod the emmc bug is fixed or more precisely circumvented.
Sent from my Galaxy Note running ICS

altae said:
I can recommend the Goku Kernel. It's based on Speedmod but comes with a few extras like additional cpu governors... And even the latest beta is stable. What's more funky81 is actively developing his kernel.
By the way because it's based on Speedmod the emmc bug is fixed or more precisely circumvented.
Sent from my Galaxy Note running ICS
Click to expand...
Click to collapse
Have anyone tested Full Wipe/Factory reset Stock ICS rom with speedmod kernal..

[Q] Help!! - Jump from ICS Stunner to another ROM

Dear Mods/devs any body who can help me!
I am stuck in a unique situation and no matter what i cant figure out a way out of this!
Before posting this have been through Abhisahara's thread on rooting and kernels, Dr Ketan's thread and many more but all confused!!
My problem is i am on the Superbrickable ZCLP5 kernel with ICS Stunner 1.4.19 which i have been using since it first launched without any problems.
As per gotbrickbug App, i have the problem of potential superbrick.
I need to go to another ROM but just cant figure a way out as now am more confused as to what really to do!!
I already have the hydracore kernel downloaded and the stock GB Rom(unrooted - V KL1) with me sitting on my PC alongwith PC ODIN.
Can anybody help me with installing the Paranoidandroid rom and which is the best way to avoid the emmc_CAP_ERASE problem!!
Many thanks!!

cyberdeception said:
Dear Mods/devs any body who can help me!
I am stuck in a unique situation and no matter what i cant figure out a way out of this!
Before posting this have been through Abhisahara's thread on rooting and kernels, Dr Ketan's thread and many more but all confused!!
My problem is i am on the Superbrickable ZCLP5 kernel with ICS Stunner 1.4.19 which i have been using since it first launched without any problems.
As per gotbrickbug App, i have the problem of potential superbrick.
I need to go to another ROM but just cant figure a way out as now am more confused as to what really to do!!
I already have the hydracore kernel downloaded and the stock GB Rom(unrooted - V KL1) with me sitting on my PC alongwith PC ODIN.
Can anybody help me with installing the Paranoidandroid rom and which is the best way to avoid the emmc_CAP_ERASE problem!!
Many thanks!!
Click to expand...
Click to collapse
Just flash Hydracore kernel and you will be good to go for flashing any custom rom.

cyberdeception said:
Dear Mods/devs any body who can help me!
I am stuck in a unique situation and no matter what i cant figure out a way out of this!
Before posting this have been through Abhisahara's thread on rooting and kernels, Dr Ketan's thread and many more but all confused!!
My problem is i am on the Superbrickable ZCLP5 kernel with ICS Stunner 1.4.19 which i have been using since it first launched without any problems.
As per gotbrickbug App, i have the problem of potential superbrick.
I need to go to another ROM but just cant figure a way out as now am more confused as to what really to do!!
I already have the hydracore kernel downloaded and the stock GB Rom(unrooted - V KL1) with me sitting on my PC alongwith PC ODIN.
Can anybody help me with installing the Paranoidandroid rom and which is the best way to avoid the emmc_CAP_ERASE problem!!
Many thanks!!
Click to expand...
Click to collapse
Take it easy, you're fine. If you've installed HydraCore it means you're on a safe kernel. Just download pc Odin if you haven't already.
What rom do you want to go to? I'd recommend for safest operation, install gb stock, then look at upgrade but it depends on which rom you want to flash.
Emmc bug is only triggered on stock kernels or under some cwm flashes which most people don't do, so take it easy, you're ok.
Sent from my GT-N7000 using xda app-developers app

cyberdeception said:
Dear Mods/devs any body who can help me!
I am stuck in a unique situation and no matter what i cant figure out a way out of this!
Before posting this have been through Abhisahara's thread on rooting and kernels, Dr Ketan's thread and many more but all confused!!
My problem is i am on the Superbrickable ZCLP5 kernel with ICS Stunner 1.4.19 which i have been using since it first launched without any problems.
As per gotbrickbug App, i have the problem of potential superbrick.
I need to go to another ROM but just cant figure a way out as now am more confused as to what really to do!!
I already have the hydracore kernel downloaded and the stock GB Rom(unrooted - V KL1) with me sitting on my PC alongwith PC ODIN.
Can anybody help me with installing the Paranoidandroid rom and which is the best way to avoid the emmc_CAP_ERASE problem!!
Many thanks!!
Click to expand...
Click to collapse
1. Flash hydracore kernel.
2. Reboot recovery.
3. Make sure you are on hydracore kernel.
4. Do what ever you want.
If you still being scare of doing this. Just follow jeetu suggestion. Go back to gb pre rooted rom by using pc odin. Then use mobile odin to flash rooted kernel. After get full root, go recovery and flash cm9. Done.
Sent from my GT-N7000 using xda premium

Re
Thanks for the clarity...
one more thing..
I am now flashing the kernel as we speak to hydracore..
Will i lose root if i need to install the ParanoidAndroid rom..
If not..do i need to go the whole way of installing stock GB and then rooting it and then installing the paranoid rom!..
really appreciate the help friends!..

cyberdeception said:
Thanks for the clarity...
one more thing..
I am now flashing the kernel as we speak to hydracore..
Will i lose root if i need to install the ParanoidAndroid rom..
If not..do i need to go the whole way of installing stock GB and then rooting it and then installing the paranoid rom!..
really appreciate the help friends!..
Click to expand...
Click to collapse
Flashing Hydracore doesn't affect root, you will be rooted and can flash PA directly using cwmr after flashing hydracore.

cyberdeception said:
Thanks for the clarity...
one more thing..
I am now flashing the kernel as we speak to hydracore..
Will i lose root if i need to install the ParanoidAndroid rom..
If not..do i need to go the whole way of installing stock GB and then rooting it and then installing the paranoid rom!..
really appreciate the help friends!..
Click to expand...
Click to collapse
I would recommend you go with the long route of installing stock GB first. I saw the installation instructions of PA (i'm not sure though if that's an outdated tutorial or if it's still the current one to date), but it explicitly tells you that you need to be on stock GB before installing PA. I'm open to corrections though from those who have PA already installed but personally,it would be good if you start from scratch and work your way up to eventually install PA.
That's just my advice to you.

Hi,
I got a question, I have flashed the kernel to the hydracore one, have root and CWM but I am still on the ICS stock ROM. Is it possible to go directly to paranoid one without the need to downgrade to GB ?
By the way, can you provide a link to dl paranoid ?
Thank you in advance for your answer.

zone.art said:
Hi,
I got a question, I have flashed the kernel to the hydracore one, have root and CWM but I am still on the ICS stock ROM. Is it possible to go directly to paranoid one without the need to downgrade to GB ?
By the way, can you provide a link to dl paranoid ?
Thank you in advance for your answer.
Click to expand...
Click to collapse
Yeah you can flash paranoid straight... Download GApps and the rom from original development section.. Remember perform all the wipes before flashing
Enviado desde mi GT-N7000 usando Tapatalk 2

Deleted

msedek said:
Yeah you can flash paranoid straight... Download GApps and the rom from original development section.. Remember perform all the wipes before flashing
Enviado desde mi GT-N7000 usando Tapatalk 2
Click to expand...
Click to collapse
Ok but as I can see the ROM is only 160 MB as other ROM (stock for example are almost 700MB), I don't want to lose some essential functionalities by flashing to an incomplete ROM. How to know which file to dl from the Gapps is there on this one that you have the 500 MB missing ?
Thanks again and sorry for my poor knowledge

All aosp roms are that size.. It's a completely different experience as aosp roms are pure Google experience with no Samsung or any other retailers custom launcher and bloat..
It depends on Wich functionalities do you have in mind?
Enviado desde mi GT-N7000 usando Tapatalk 2

Ok thanks so they put a lot of useless heavy crap inside I guess
I am still struggling to have a download link for a stable zip file to flash, is it possible to have a link ?
Thank you

I've downloaded the rom in the past no issues.. Don't know about mirrors.. Maybe ask there in the ParanoidAndroid threat
Enviado desde mi GT-N7000 usando Tapatalk 2

[Q] GT-N7000 Stock ITV Jelly Bean, Philz Or Hydracore?

Hi everyone!
1st: Sorry for my english :silly:
2nd: I need help, i'm very very noob at Android, i recently bought a new Samsung Galaxy Note with ICS 4.0.4 Software Unbrand... The question is, i want to install 4.1.2 ITV (N7000ITVLS4.... ITALY) with odin and later i wanna instal a safe kernel but i don´t know which one... Philz or Hydracore? Which one is better? and which one will able me to unbrand my GN in the case of loosing the Software Unbrand?
3rd: How i install the kernel, i really don´t understand very well the procedure! I have fear about bricking mi new GN...
Thanks !

R: [Q] GT-N7000 Stock ITV Jelly Bean, Philz Or Hydracore?
MarianoQT said:
Hi everyone!
1st: Sorry for my english :silly:
2nd: I need help, i'm very very noob at Android, i recently bought a new Samsung Galaxy Note with ICS 4.0.4 Software Unbrand... The question is, i want to install 4.1.2 ITV (N7000ITVLS4.... ITALY) with odin and later i wanna instal a safe kernel but i don´t know which one... Philz or Hydracore? Which one is better? and which one will able me to unbrand my GN in the case of loosing the Software Unbrand?
3rd: How i install the kernel, i really don´t understand very well the procedure! I have fear about bricking mi new GN...
Thanks !
Click to expand...
Click to collapse
You should first install a hydracore kernel on your actual ics (but maybe it is no need), then flash the new jb rom lsz (the one you said) and after you can choose to flash or philz kernel (v 4.88.2) or speedmod kernel (k5-1). Both are goods! To flash all this, you just need a simple program called Odin
If you go in original android development section, you will find all that you need! Just read carefully the main threads, and all will go fine. There are also screenshots attached to the posts, so it will be more clear. Btw if you have some doubts, post here or pm me (sono italiano anche io )
Edit: ops I just saw you're not Italian
Sent from my GT-N7000 using xda premium

Bad-Pixel said:
Edit: ops I just saw you're not Italian
Click to expand...
Click to collapse
No, he's from Argentina. But recent events make this misunderstanding acceptable (sorry for OT, couldn't resist).

R: [Q] GT-N7000 Stock ITV Jelly Bean, Philz Or Hydracore?
ThaiDai said:
No, he's from Argentina. But recent events make this misunderstanding acceptable (sorry for OT, couldn't resist).
Click to expand...
Click to collapse
Lol yes it's the same thing I thought about
Btw in that procedure, it may be safe, flashing the lsz rom directly without flash a safe kernel before, by odin ofc? Or we absolutely must flash a safe kernel before to flash anything by odin?
Sent from my GT-N7000 using xda premium

Thanks
Bad-Pixel said:
Lol yes it's the same thing I thought about
Btw in that procedure, it may be safe, flashing the lsz rom directly without flash a safe kernel before, by odin ofc? Or we absolutely must flash a safe kernel before to flash anything by odin?
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Thanks for the answer ! I just installed successfully the Italian version of JB !
PD: No, i'm from Buenos Aires, But i'm an Italian Citizen, i have double citizenship...

R: [Q] GT-N7000 Stock ITV Jelly Bean, Philz Or Hydracore?
Nice dude
Glad it worked! If I can give you a personal advice:
Install speedmod kernel (actual is k5-1) using odin, download triangle away (actual should be 2.75.. Search it here on xda, by chainfire) install it and use it to remove the yellow alert triangle at the boot time (please read carefully how to use that apk). Now you got a safe kernel, root permissions and very good performance / stability. Ofc if you do that, you "temporarily" will lose the warranty (cuz of the root and the custom kernel). If you don't want, just keep your note as it is now
Regards!
Sent from my GT-N7000 using xda premium

Bad-Pixel said:
Nice dude
Glad it worked! If I can give you a personal advice:
Install speedmod kernel (actual is k5-1) using odin, download triangle away (actual should be 2.75.. Search it here on xda, by chainfire) install it and use it to remove the yellow alert triangle at the boot time (please read carefully how to use that apk). Now you got a safe kernel, root permissions and very good performance / stability. Ofc if you do that, you "temporarily" will lose the warranty (cuz of the root and the custom kernel). If you don't want, just keep your note as it is now
Regards!
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
I will keep that in mind... But i want to install CM10.1 in mi N7000, my cousin(he has a Galaxy S3 with Philz 4.88.5 and CM10.1) he recommended it to me... I really want the performance/interface given by CyanoGen Mod...
What do you think? Will CM10.1 + Philz Recovery give me a remarkable efficiency that i'm looking for?
Will you recommend my Hydracore Kernel?

R: [Q] GT-N7000 Stock ITV Jelly Bean, Philz Or Hydracore?
MarianoQT said:
What do you think? Will CM10.1 + Philz Recovery give me a remarkable efficiency that i'm looking for?
Will you recommend my Hydracore Kernel?
Click to expand...
Click to collapse
You can't use philz kernel (I'm talking about our galaxy note at least) on any other rom than a Touchwiz based. So unfortunately you can't use it on cm10.1 :/
When I used a cm based, usually I kept the original cm kernel, Btw some of new kernels on xda are interesting! So maybe just try them
For now I'm on ultimate rom, and I'm planning to switch to another one soon (I'm flasholic...)
Sent from my GT-N7000 using xda premium

Bad-Pixel said:
You can't use philz kernel (I'm talking about our galaxy note at least) on any other rom than a Touchwiz based. So unfortunately you can't use it on cm10.1 :/
When I used a cm based, usually I kept the original cm kernel, Btw some of new kernels on xda are interesting! So maybe just try them
For now I'm on ultimate rom, and I'm planning to switch to another one soon (I'm flasholic...)
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Really? Maybe i read wrong ! But there is written that Philz 4.88.5 supports CM10.1 and GT-N7000...
Read This thread http://forum.xda-developers.com/showthread.php?t=2002953
Someone in http://www.Taringa.net recommended me to use Crash Rom with Philz kernel ! And not only one person did that !
What Do You Think? I'm very confused about Android(Kernel/Rom/Recovery)...
PD: I really miss my iPod Touch 4g ! iOS it's heaven for me hahahaha

R: [Q] GT-N7000 Stock ITV Jelly Bean, Philz Or Hydracore?
But dude, that topic is about the galaxy s3 (i9300) and talking about a custom recovery (with few words, the menu from where you install new roms or wipe your note) and not about a kernel. Plus, Dev Crash left our note community some months ago, and his last rom is a jb leak rom Samsung, so I don't recommend you to install it. It's too much old now. Btw, if you wanna some advice about all this story (kernel recovery and other maybe) I advice you to:
First search for some already opened thread, and if you will not any answer to your questions, open a new thread
Sent from my GT-N7000 using xda premium

Auch ! Sorry man ! I had a confusion !
But if you read the Thread there says that it's compatible with N7000... So, i can install Philz 4.88.5 Recovery on my Note !
Reading in the web i found a tutorial of the CM10.1 Official for N7000, i think i will use this ROM in my Note ! What do you think? Any advice?
In the page of CM i found the tutorial... I can't put the link here...
I'm think i will install... CM10.1 4.2.2(Nightly) ROM + Philz 4.88.5 Recovery ! Will this work?

I'm think i will install... CM10.1 4.2.2(Nightly) ROM + Philz 4.88.5 Recovery ! Will this work?
Click to expand...
Click to collapse
Philz kernels only work with Samsung TW roms and no other roms. CM10 has its on kernel or other kernels based on them like DH

nokiamodeln91 said:
Philz kernels only work with Samsung TW roms and no other roms. CM10 has its on kernel or other kernels based on them like DH
Click to expand...
Click to collapse
I said Philz Recovery... With CM10.1 ROM and Kernel !

which Philz recovery are you referring to ? Temp one?

nokiamodeln91 said:
which Philz recovery are you referring to ? Temp one?
Click to expand...
Click to collapse
Philz 4.88.5 Touch CWM 6.0.3.0.... Why?

MarianoQT said:
Philz 4.88.5 Touch CWM 6.0.3.0.... Why?
Click to expand...
Click to collapse
Dont you read? Phil touch recovery + stock kernel is only for touchwiz rom a.k.a stock rom. No cm9 no cm10 or cm10.1. If im not mistaken speedmod kernel is using phil recovery but no touch features it also for stock touchwiz rom. Correct if im wrong
Sent from my GT-N7000 using xda premium

struk in boot
Bad-Pixel said:
You should first install a hydracore kernel on your actual ics (but maybe it is no need), then flash the new jb rom lsz (the one you said) and after you can choose to flash or philz kernel (v 4.88.2) or speedmod kernel (k5-1). Both are goods! To flash all this, you just need a simple program called Odin
If you go in original android development section, you will find all that you need! Just read carefully the main threads, and all will go fine. There are also screenshots attached to the posts, so it will be more clear. Btw if you have some doubts, post here or pm me (sono italiano anche io )
Edit: ops I just saw you're not Italian
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
hi i just want your help pls answer me as soon as possible i installed official 4.1.2 official rom on my note. after that i want to root it and i install philz kernal from cwm. now the phone is not starting not going in recovery mode. only downloading mode. now i dont know waht to do install that rom again or install a kernal first.

altanole said:
hi i just want your help pls answer me as soon as possible i installed official 4.1.2 official rom on my note. after that i want to root it and i install philz kernal from cwm. now the phone is not starting not going in recovery mode. only downloading mode. now i dont know waht to do install that rom again or install a kernal first.
Click to expand...
Click to collapse
Ok resolved
I installed philzkernal matching to my rom via Odin and now is all fine
Sent from my GT-N7000 using xda app-developers app