Hiya
Sorry if this was already common knowledge but the article about a WM06 upgrade for the HTC3300 led me to contact HTC it see if one was due soon for the HTC3600 / trinity
The response below is disappointing to say the least :-(
" Good Morning,
Thank you for contacting HTC Europe regarding Windows Mobile 6.
For further information on our Windows Mobile 6 update strategy, including which devices will receive the update, please see the following link;
http://www.europe.htc.com/z/pdf/press/WM6_statement_v6.pdf
They will only be available for Original HTC branded devices, no Network branded devices will be updated through the HTC E-club. For updates to these devices, please speak to your network operator.
The following information is currently available for updates for HTC branded devices:
X7500 - Currently available
S620 - Currently available
TyTN - Currently available
P4350 - Currently available
P3300 - Currently available
P3600 - Will not be updated
The above information is for European devices only.? "
Does anyone know of a stable working WM06 ROM ??
Best
Coe
coe62 said:
Does anyone know of a stable working WM06 ROM ??
Click to expand...
Click to collapse
Yep ... go there : http://forum.xda-developers.com/forumdisplay.php?f=359 : try, flash and report ...
I have a good tips for you
http://www.asia.htc.com/asia/event/WM6/download.html
D810 is the same than P3600....
1. create a login on the australia site
2. come back to the link
3. password
4. download update D810
I will update in 5 min
best regards
aldo_
coe62 said:
Hiya
The following information is currently available for updates for HTC branded devices:
P3600 - Will not be updated
Coe
Click to expand...
Click to collapse
The P3600 is an HTC Branded device, they should at least get one consistant answer
Good day for everyione,
I have to say that the d810 update was made by DopDop and not by HTC. That's why there is a WM6 vertion for DopDop.
Best regards,
Dave
DODOP it is the reseller of HTC...
anyway it's like orange who sell the HTC as QTEK9100 if i'm not wrong
best regards
Eric
aldo_ said:
DODOP it is the reseller of HTC...
anyway it's like orange who sell the HTC as QTEK9100 if i'm not wrong
best regards
Eric
Click to expand...
Click to collapse
No, Orange did not sell the wizard as Qtek 9100. It was sold as SPV M3000.
SPV is Orange's Brand for HTC phones.
That was in the past. In the future, Orange will not personalize HTC phones anymore. They will be sold as HTC, just like the plain unbranded phones.
As far as Dopod and HTC are concerned, I think the problem is different. Obviously Dopod BELONGS to HTC.
That's why there isn't any dopod's support website anymore, and Dopod customers must download their updates directly from HTC website!
So HTC has got the responsibility of the Dopod rom and make the support for it.
SPV roms are downloadable from Orange websites, not from Qtek or HTC one.
HTC gives NO support to SPV (Orange) roms and takes no responsibiliy about them.
You cannot compare the two cases.
HTC is fooling people around, because DOPOD = HTC. It's just that they don't want to give wm6 to Western customers!!
aldo_ said:
I have a good tips for you
http://www.asia.htc.com/asia/event/WM6/download.html
D810 is the same than P3600....
1. create a login on the australia site
2. come back to the link
3. password
4. download update D810
I will update in 5 min
best regards
aldo_
Click to expand...
Click to collapse
Hi everyone,
I have downloaded the Rom from the HTC Australian website but it will not complete the Rom upgrade on my P3600, I keep getting an error message saying ‘update error’ (Error 286). I have tried the suggested solutions like soft reset and taking out the battery but the error message keeps coming up after several attempts.
Any suggestions?
You should take the SPL/IPL out of that ROM, this is why you can't install it, it is protected to install only on dopod's phones.
You sould, first of all install a hard SPL on your phone to prevent bricking it.
riri22 said:
You should take the SPL/IPL out of that ROM, this is why you can't install it, it is protected to install only on dopod's phones.
You sould, first of all install a hard SPL on your phone to prevent bricking it.
Click to expand...
Click to collapse
Hello again
Thaanks for your suggestions. if I understaood properly: I deleted the file (SPL.nbh) from the rom folder, i installed the files called hardspl_120.zip) and (Hard-SPL_ZakMcRofl.zip) to my device P3600. but, the error message keeps coming up just as the rom update reaches 28%.
Thanks again
viacarzeto28 said:
Hello again
Thaanks for your suggestions. if I understaood properly: I deleted the file (SPL.nbh) from the rom folder, i installed the files called hardspl_120.zip) and (Hard-SPL_ZakMcRofl.zip) to my device P3600. but, the error message keeps coming up just as the rom update reaches 28%.
Thanks again
Click to expand...
Click to collapse
If you still having this kind of problem, it means your device is not CID unlock yet.
The Hard SPL you should install are not those (I don't know which file you are refering to). Check out this Trinty upgrade thread, there should be Hard SPL Olipro or Des available. These are the ones you should install.
I'm afraid the ROM you are trying to install still have some kind of protection too. On this site, you'll find Dopod ROM, without IPL/SPL, try to install that one. this is what I did, and I never had any 28% error.
could any one provide me these files from their wm5 rom
camera.dll
htccamera.dll
htccamerautility.dll
s5k3bafx.dll
battdrvr.dll
i need them for htc prophet ,if your camera looks like htc p3400 on this page http://www.mobile-review.com/pda/review/htc-p3400-en.shtml
My P3600 don't have most of the files you are looking for. Only got battdrvr and htccamerautility. But I doubt they are very - extremely device specific.... and probably not of much use to your P3400.
ww2250 said:
My P3600 don't have most of the files you are looking for. Only got battdrvr and htccamerautility. But I doubt they are very - extremely device specific.... and probably not of much use to your P3400.
Click to expand...
Click to collapse
PS. i need those p3400(trinity) drivers for my imate jamin(prophet)
add camera.exe to those drivers in the list.
what he mean is that p3400 is gene
p3600 is trinity
Rudegar said:
what he mean is that p3400 is gene
p3600 is trinity
Click to expand...
Click to collapse
i assume gene to be name for p3400 right! so is there any thread for p3400 i.e, gene too
kamalneet said:
i assume gene to be name for p3400 right! so is there any thread for p3400 i.e, gene too
Click to expand...
Click to collapse
http://rapidshare.com/files/53225336/HTC_Rom_upgrade.exe
i upgrade my p3600 from this site
http://www.smartmobility.nl/_BIN/TRI_DT_WWE_1234052_103_6275_1380011_108_Ship.zip
the rom is WWE
and it reach to 100% but when phone start it hold on HTC logo ?????
edit: fix it work great
Aqrab said:
some one help me i upgrade my p3600 from this site
http://www.smartmobility.nl/_BIN/TRI_DT_WWE_1234052_103_6275_1380011_108_Ship.zip
the rom is WWE
and it reach to 100% but when phone start it hold on HTC logo what can i do ?????
edit: fix it work great
Click to expand...
Click to collapse
Which WM Version (5, 6, 6.1) is this?
Can you post something about this rom?
br
they side its wm6 but its not
dont bother download
Does anyone know if Windows Mobile 7 will run on HTC P3600? The ROM has been released ?
DooMFeaR said:
Does anyone know if Windows Mobile 7 will run on HTC P3600? The ROM has been released ?
Click to expand...
Click to collapse
I think no one has been ported WM7 into htc Trinity..
it's impossible - use "search" plz...
thankjyou and good service
The hardware of the p3600 is not able to support your request.
Hi
I've got an unlocked HTC Touch Diamond 2, currently running an official WinMo 6.1 rom.
My main question is - is there any evidence that an upgrade to the official WinMo 6.5 rom will improve the phone signal?
My other question:
Will the rom for the Rhodium work on the Topaz? HTC tell me it's the same (verbally), hence the the support page showing the rom for Touch Pro 2.
Cheers
CF
2 Flash: Splash, OS, Radio..
CraigFreeloader said:
Hi
My main question is - is there any evidence that an upgrade to the official WinMo 6.5 rom will improve the phone signal?
Click to expand...
Click to collapse
No! For this to happen you'll need to find a suitable radio.nbh for Topaz.
Our WinMo phones can flash the splash screen, OS and radio only.
Topaz Radio ROM List
My other question:
Will the rom for the Rhodium work on the Topaz? HTC tell me it's the same (verbally), hence the the support page showing the rom for Touch Pro 2.
Click to expand...
Click to collapse
Yes it will..
Good luck,
Senax