I've looked but can't find any help with this so I decided to finally ask. It's something I noticed with my last phone, a Sony xperia x10, and something ive noticed with my new phone, the HTC vivid. I plug my phone into my car's speakers when I drive so that I can listen to music and talk hands free. The problem seems to be that when I plug my audio cable in to the headphone jack the voice recognition stops working well. At first it will say it hears no audio, but if I yell loud enough sometimes it will work. It's something that I've seen with both my android phones consistently. Voice recognition is fine otherwise. Any idea what's going on or how to fix it? Thanks.
Sent from my HTC PH39100 using XDA
Related
I don't really know how to explain...
I use my Nexus one in my car for calls.
I use a jack cable which is plugged into the radio. So I can hear my partner over the speaker in the car. Very good.
But, the others can't understand me. It's crappling all over.
When I put the cable out of the jack and use the normal hands free on the phone, everything is fine and the others understand me very well.
By plugging into the car radios jack, it starts with crappling my voice again.
Does anybody have the same problem? Or is it fine on your Nexus all the time?
Formel-LMS said:
I don't really know how to explain...
I use my Nexus one in my car for calls.
I use a jack cable which is plugged into the radio. So I can hear my partner over the speaker in the car. Very good.
But, the others can't understand me. It's crappling all over.
When I put the cable out of the jack and use the normal hands free on the phone, everything is fine and the others understand me very well.
By plugging into the car radios jack, it starts with crappling my voice again.
Does anybody have the same problem? Or is it fine on your Nexus all the time?
Click to expand...
Click to collapse
sounds like the phone might be trying to find a microphone in the radio
Yes, could be. But why? What can I do?
It was very cool when somebody can try it, if it works on other NexusOne.
well the default headphones had a speaker in them so the jack is made to work as a speaker jack and a mic jack. however im not sure why it is expecting a mic when there is no information being sent back to the phone.
Simple expanation, I think - noise canceling functions.
When you're in speaker mode, it's settings are probably changed to account for a voice coming from a distance and being roughly equal for both mics, while when in regular mode it's working and expecting significant signal difference. When it doesn't get it - since you're speaking from a distance - it doesn't "think" you're talking, and cancels your voice partially as it would cancel outside noise.
There is a hack somewhere in General or Dev section, how to disable noise canceling. You might try.
OK, when I find it.... Sounds good
I hate making new threads but I can't seem to find an answer. Maybe I'm using the wrong keywords.
I use my N1 in my car alot. It's my main source for my music and hand's free calling while driving. I use the aux jack on my stereo to the N1 for music.
When I get a call it would ring though the speakers and I would touch the slider to accept the call. The caller would hear me crystal clear and I would hear them though the speakers just fine.
Now when I get a call, they can't hear me. They say I sound like I'm far far away. I can hear them just fine. But I look like a madman in my car screaming and yelling just to be heard.
So what I have to do now, is answer the call, and touch speaker, which only plays the voice though the speaker phone. They hear me crystal clear but sound is no longer going to the car speakers.
Anybody have this problem or know what's causing it or even a push in the right direction?
I have this excact same problem.
I came from a milestone using a standard 3.5mm audio jack and calls went really well. But when i tried my nexus, i got the same response, "sounds liek your far away".
I tried a few AUX cables but they all seem to do the same thing. So my solution was a aux cable with a built in mic.
I ended up modding the headphones that came with my nexus to get this working. Removed the earbuds and soldered a 3.5mm jack.
Now when i talk using that cable with a built in mic, ppl hear me very clearly. So i've jsut been using that cable since. I'm sure you can buy a premade aux cable with a mic at any local mobile audio store. I saw one at a BestBuy mobile here.
Hope this helps.
but the issue is that at one point it DID work normal with his nexus. i think what is going on here is the phone originally read the aux input as just standard audio output. but now its reading it differently somehow, i just dont know why. its almost like the difference when a phone thinks you have headset connected vs audio out connected with no mic support. no idea on a solution though...
xiophyte said:
I have this excact same problem.
I came from a milestone using a standard 3.5mm audio jack and calls went really well. But when i tried my nexus, i got the same response, "sounds liek your far away".
I tried a few AUX cables but they all seem to do the same thing. So my solution was a aux cable with a built in mic.
I ended up modding the headphones that came with my nexus to get this working. Removed the earbuds and soldered a 3.5mm jack.
Now when i talk using that cable with a built in mic, ppl hear me very clearly. So i've jsut been using that cable since. I'm sure you can buy a premade aux cable with a mic at any local mobile audio store. I saw one at a BestBuy mobile here.
I was thinking on buying the Belkin one with the mic right at the aux jack.
Hope this helps.
Click to expand...
Click to collapse
RogerPodacter said:
but the issue is that at one point it DID work normal with his nexus. i think what is going on here is the phone originally read the aux input as just standard audio output. but now its reading it differently somehow, i just dont know why. its almost like the difference when a phone thinks you have headset connected vs audio out connected with no mic support. no idea on a solution though...
Click to expand...
Click to collapse
Exactly, it DID work. I can't pin point when it happened for me. I was thinking maybe it was when I went from Eclair to Froyo?
I'm almost positive that using the phone over Aux out broken with the update to Froyo. Has anyone tried this yet with Gingerbread on the N1 or with an NS? I'm hoping they fixed this, it's a really, really frustrating problem.
My fear is that everyone at Google got free car docks so they won't ever fix it because it's never a problem for them.
I also have the exact same problem. Thought it never worked for me, I only recently sets up my car mount with aux. Anybody found a solution?
I picked up a Vivid over the weekend and overall I'm thrilled. The only area that is lacking is BT quality when paired with my car stereo (Pioneer AVIC-Z110 updated to the Z130 firmware). Granted, these units have gotten bad reviews for their BT quality, HOWEVER, my old device worked well. I used to have an HTC "Pure" running Windows Mobile and got no complaints for call quality.
My wife now says that this phone is echoing really badly. I can't hear it on my end, all sounds well. When I disable BT and just call her directly from the handset, all is well.
Are there any tweaks or settings that can be changed in Android and on the Vivid specifically? I read about someone adjusting the "BT gain" before they paired their device, but I can't find such a setting.
Thanks,
-Brett.
+1 on this. My stereo has a Mic volume adjust that helps a little, but it seems to be bad when I'm on the highway. Though I've always had this problem with Android. my old windows 6.5 phones were just fine.
Another Solution
Instead of using BT for music from my phone, I just hit the Sirius/XM button on the sound system, or plug my iPod directly into the sound system. Of course, I had to buy a new vehicle to get this capability.
PS: The Vivid does work well via BT for hands-free phone calls, also built into the new vehicle.
brucegil said:
Instead of using BT for music from my phone, I just hit the Sirius/XM button on the sound system, or plug my iPod directly into the sound system. Of course, I had to buy a new vehicle to get this capability.
PS: The Vivid does work well via BT for hands-free phone calls, also built into the new vehicle.
Click to expand...
Click to collapse
I re-read my first post and realized I might not have been as clear as I could be. I'm speaking strictly about phone call quality, not BT audio streaming. I tried audio streaming once and it sounded OK, but that's not what I'm referring to here.
When talking on the phone using the Pioneer AVIC z110 as a BT headset the person that I'm calling reports a lot of echo on their end, to the point where it's almost unusable. Things sound mostly fine on my end.
So the question stands - are there any (hidden?) settings or adjustments that can be made on the Vivid, or in Android in general?
Thanks,
-Brett.
not to my knowledge, no adjustments. But if you're using your headset, have you used it on other phones without this problem? If there's an echo, it makes me think maybe the phone mic is active while it should be only the BT mic that is. Maybe try covering the phone mic with your thumb or something and ask the person on the other end if that does anything to take away the echo?
Yea I'm getting the same feedback about phone calls. Music quality is great except when I use navigation. My streak would lower music when it would speak instructions. My vivid doesn't.
Reclaim said:
Yea I'm getting the same feedback
Click to expand...
Click to collapse
Pun intended?
radi0chik said:
not to my knowledge, no adjustments. But if you're using your headset, have you used it on other phones without this problem? If there's an echo, it makes me think maybe the phone mic is active while it should be only the BT mic that is. Maybe try covering the phone mic with your thumb or something and ask the person on the other end if that does anything to take away the echo?
Click to expand...
Click to collapse
I used the same BT setup on my old Windows Mobile phone with no complaints.
Maybe you're on to something. I had assumed that the phone would mute its internal microphone when connected to a BT device. Maybe that's not the case? I'll try covering the phone's mic and see if that makes a difference.
Thanks,
-Brett.
No luck. I tried both covering the Mic and taking the phone out of the car entirely. It made no difference in call quality.
Next step is to pair my wife's blackberry to the car and see if that works better. Need to determine if it's the phone or the car.
:: Sent from my HTC Vivid via Tapatalk
radi0chik said:
Pun intended?
Click to expand...
Click to collapse
I'm a real comedian lol
Sent from my HTC PH39100 using XDA App
zzoinks said:
I re-read my first post and realized I might not have been as clear as I could be. I'm speaking strictly about phone call quality, not BT audio streaming. I tried audio streaming once and it sounded OK, but that's not what I'm referring to here.
When talking on the phone using the Pioneer AVIC z110 as a BT headset the person that I'm calling reports a lot of echo on their end, to the point where it's almost unusable. Things sound mostly fine on my end.
So the question stands - are there any (hidden?) settings or adjustments that can be made on the Vivid, or in Android in general?
Thanks,
-Brett.
Click to expand...
Click to collapse
Sorry for being a smart-aleck. Actually, on a hand-free BT call last night I noticed a bit of an echo. I need to make some more calls to see if it continues. I never had that with the HD2 in 15 montrhs of use. Also, I noticed that the phone rings directly as well as through the car's sound system when I recieve a call. Again, I don't remember my HD2 doing that.
Minor update: I've found that it might be related to the Android Bluetooth in call volume setting. It seems like if I lower the volume during a call (via the volume rocker on the phone, not form the car's head unit) it helps with the echo problem. The problem is that this volume level resets itself to the max every time I pair with the car.
Is there any way to force Android to keep a lower volume level for the BT headset? I tried an app called Bluetooth Volume, but it didn't affect the BT Headset volume.
Thanks,
-Brett.
Hi all, first post.
Haven't seen this mentioned anywhere else so thought id register and make this thread.
Got a HTC One a couple of months ago and absolutely love it. Recently had no problems with it, but then just the other day, plugged in the headphones that come stock with the phone and the sound wasn't playing through the headphones. thought this odd seeing as it worked the day before. Also the sound was being transmitted through the phone speakers even with the headphones connected.
I downloaded an app called soundabout and selected the output to headphones, and this seemed to work, but then meant media wouldnt play through the phone's speakers. so i deleted the app in hope the headphone jack would now work as it just did with the app, but it doesnt, still the sound is played through the speakers, even though with the app it could be played through the headphones.
has anyone else had this problem?
all help greatly appreciated. thanks!
I'm having an interesting issue, and none of the things I've found on forum search seem similar. I recently replaced my XT1053 Dev Edition due to a cracked screen. I have an Apple Earpod headset the used to work fine for calls...that is, I never really bothered getting the buttons to work, but the headphones output audio just fine, and the mic worked in calls so I could leave my phone in my pocket.
However, recently with the new phone, I'm having an issue with the headset. Now the mic doesn't work on phone calls. Phone audio and music output fine. The other weird thing is that, if I'm listening to music and someone calls, and I pick up the call with the headset in (then find the mic doesn't work), I'll unplug the headset to use the phone regularly...but when I do, the phone defaults to speaker mode for some reason.
Not sure if this is (hopefully) an easy software fix, but if anyone has insights, I'd love to hear them. I don't think it is the headphones, as they work in my wife's iPhone just fine.
Not compatible with the X. Sorry. ?
According to this reddit thread the mic will work if you hold down the center button while plugging in.
http://www.reddit.com/r/MotoX/comments/1x31i1/headphones_with_mic_that_work/
Actually, the iPhone headset DID work fine on my last Moto X before I had to replace it. I was able to listen to music and make calls with it, and the mic worked. I'm wondering why it doesn't work anymore, if there's some software fix to it not working.
Well, a while back there was a lot of posts saying it didn't work. If it did or does, great.
Bottom line tho, if you plug it in and it works, awesome. If it doesn't, then it won't.
No software will help. ?
adamkaye said:
I'm having an interesting issue, and none of the things I've found on forum search seem similar. I recently replaced my XT1053 Dev Edition due to a cracked screen. I have an Apple Earpod headset the used to work fine for calls...that is, I never really bothered getting the buttons to work, but the headphones output audio just fine, and the mic worked in calls so I could leave my phone in my pocket.
However, recently with the new phone, I'm having an issue with the headset. Now the mic doesn't work on phone calls. Phone audio and music output fine. The other weird thing is that, if I'm listening to music and someone calls, and I pick up the call with the headset in (then find the mic doesn't work), I'll unplug the headset to use the phone regularly...but when I do, the phone defaults to speaker mode for some reason.
Not sure if this is (hopefully) an easy software fix, but if anyone has insights, I'd love to hear them. I don't think it is the headphones, as they work in my wife's iPhone just fine.
Click to expand...
Click to collapse
Hi,
I'm using a blackberry headset and having no issues with audio/mic. But I'm having the issue where the phone defaults to speakerphone mode when unplugging the headset in the middle of a call. This issue didn't go away with wipe cache partition, factory data restore and a warranty replacement!
BTW, i'm on stock XT1053...