Thanks to REV Kyle I have CM7 3.5 Tenderloin on my TP.
When I go to install Goog Play Apps on the TP the device is not on the list of devices recognized. Also have GAAPS ICS installed
That's your problem. You're running CM7 while running the GApps for CM9. What I would do is uninstall CM7 and install CM9 (using ACMEInstaller2) and then push the GApps for ICS. That'll get you working.
Device not recognized
Would like to do from CWM instead of DOS. Is this the process
copy CM9 zip to cminstall, backup, wipe cache, apply update from sd card
Device not recognized
Well flashed CM9 w/ GAAP ICS and still does not recogize my TP. My Google account does have my phones (HTC & Samsung Galaxy) How do I add my TP????
Did you do a full wipe or just the cache ? Because it has been determined many a time that t you cannot just upgrade from one to the other - you need to wipe everything (android) and do basically a fresh install.
Sent from my cm_tenderloin using xda premium
Related
I tried to install several ICS ROMs on my Galaxy s, but none of them worked. I did all wipes like 3 times before any rom install... I only managed to boot up SGS2 ICS rom, wich was extremely laggy and etc:L Any advices of what i can do?
Flash back to gb with this kit (unzip, read .txt first)
http://db.tt/MOGZx01S
Then go to slim website and read the installation instructions(use a nightly, not a kernel where you see the choice)
Re read, make sure you are clear what to do, make sure you have all that you need on your internal sd (nightly/i9000 file/ common file/ modem from here http://forum.xda-developers.com/showthread.php?t=1158783
[CM7/MIUI/ICS/CM9][06.01.12] Modems + Bootloaders(MD5)
Proceed, take your time, be near a computer, breath deeply, don't panic of things go wrong, post on thread of they do.
Try this.
Download the latest CM9 nightly (you will find it if you Google it)
Go to recovery
Wipe
Format system (mount and storage)
Flash in this order
CM9
Reboot recovery
Modelxxx.xxx
Slim common
Reboot.
Then enjoy
Sent from my GT-I9000 using Tapatalk 2
trying to install AOKP, it gives me error:
assert failed: run_program("/tmp/updater.sh") == 0
Click to expand...
Click to collapse
let me try install other ICS rom.... all life of my galaxy s it was on stock roms.now i decided to update to ICS. first time trying to upgrade to ICS (only used to flash GB roms before)
What exactly is your process in flashing ics, (from gb)
Sent from my GT-I9000 running remICS-UX using XDA premium
calum96 said:
What exactly is your process in flashing ics, (from gb)
Sent from my GT-I9000 running remICS-UX using XDA premium
Click to expand...
Click to collapse
Here is it:
1) get into recovery
2)Data / cache / dalvik-cache wipe
3) format /system
4)again wipes
5)mount everything i can
6) go and install file
it opens aroma installer...
pick needed items and press "install" after that it gives me error
foggydisaster said:
Here is it:
1) get into recovery
2)Data / cache / dalvik-cache wipe
3) format /system
4)again wipes
5)mount everything i can
6) go and install file
it opens aroma installer...
pick needed items and press "install" after that it gives me error
Click to expand...
Click to collapse
Unless the ROM you are installing is specifically telling you to "mount everything", do not do it. Try it again, but this time do not mount anything manually, installing from Zip should do it automatically. If it still doesn't work, make sure the ROM you are trying to install is supposed to be installed from Recovery, some do also provide files for flashing through Odin/Heimdall
EDIT: I do recommend flashing CM9 first, get the newest nightly from here: http://get.cm/?device=galaxysmtd and google apps (if you want them) from here: http://goo.im/gapps/gapps-ics-20120429-signed.zip which is the recommended one for usage with CM9 ICS.
Hi,
I installed PARANOIDANDROID 3.68 Rom (http://forum.xda-developers.com/showthread.php?t=2115167) in my note but i have some questions.
Before this i installed Xperia Gt N7000 rom and everything goes right.
My note has philZ Touch3 Revovery installed.
After PARANOIDANDROID 3.68 Rom installation i didnt found Google Play Store.
I Tried to download apk and i installed it but if i launch application it crash in a few instant.
If i try to install apps connecting my Noter to PC, and going to Play Store Web but anyway, apps installation doesn't go right (PC says me that application is installed but itsn't true)
furthermore, After PARANOIDANDROID 3.68 Rom installation, my note didnt find my sd card.
I solve it turn off my phone, unmount sd card, turn on Note it, than turn off it again, remount sdcard inside my phone againn and turn on Note;
it is the first time that happen to me something like this.
Some ideas about Google play?
i hope this is right section to post this question.
Bye.
it seems like you forgot to install gapps
http://download.paranoidandroid.co/roms/gapps
http://download.paranoidandroid.co/roms/gapps/pa_gapps-full-4.2-20130719-signed.zip
put it on your storage and do a full wipe (data, cache, dalvik) then install Paranoid Android THEN INSTANLY GAPPS!!
Hope it helps! good luck
you are right!!!
many thx!
some one says that the build-in upgrade is not very reliable, and may cause problem.
do I need to flash the 10.2 as a brand new install, means:
ie: boot CWM, wipe factory/reset, install zip, install new Gapps (still need to find it)
will this still allow me to have the apps and files (like under /Downloads)
thanks!
You could only wipe System and Cache (all Files in the Download Folder still be there), but yes you have to flash it with CWM. Take the Gapps from goo.im/gapps
Sent from my GT-I9505 using XDA Premium 4 mobile app
Hello all - I am trying to upgrade from CM9 to CM11 using [ROM] [NIGHTLY] [KitKat] [4.4] CyanogenMod 11.0 nightlies [3.0 kernel],
I repartitioned the drive with Tailor as suggested, and upgraded my CWM to (6.0.4.7)
My problem now is how do i get access the ROM/GAPPs zips? I can copy them over USB on my Win7 Machine to this folder, but CWM doesnt see them/cant access them.
I only have access to this folder in Win7. tried doing a clean install, and still no look.
Computer\cm_tenderloin\SD Card\rom.zip
the only options i have under "choose zip" in CWM are
/sdcard/0/clockworkmod - how do i get the rom zips there? i am totally stumped. i tried ADP to sideload a rom but the device isnt found. thanks in advance!!
Complete install of Android on the device
HI
I was in the same position I'd tried everything. In the end I decided to start from the beginning. What I did was pretty hardcore. I completely uninstalled Android. You need to erase the usb drive in Webos. you do this by booting into WebOS, going to settings/device info/reset options/erase USB drive. Remember before you do any of this get all you data of your device to you PC. Once this is done you are ready to install Android again. Now I found it was easier to upgrade from CM10.2 Data/Media build to CM11. So I installed Android on the device using these four files;
- moboot_38
- CM10.2,update-cm-10.2-20140126-UNOFFICIAL-tenderloin.zip
- update-gapps-jb4.3-20130813-signed.zip
- update-recovery-clockwork-no_metadata-6.0.3.6-20130926-tenderloin.zip
These files are available as a package at rootzwiki.com. There you will also find instructions on how to install android again and how to unistall android as well. Once android is installed now you need to resize the media and data partitions with tailor in webos. Now that this done you are ready to upgrade to CM11. So then booted up my device into Android. Then I connected it to my PC. enable USB conductivity on the device. I created a folder on the device on the now larger data partition (I used the same cminstall name for the folder).Transfered the CM11 (milaq version), Gapps and CMW 6.04.7 to this folder.
I would then boot into recovery. Now were going to update the CMW. choose install from zip find the folder and the CMW 6.0.4.7 file. install it.
once installed boot back into recovery. Now were going to inst CM11. First you need Perform a factory/data reset and wipe/format cache partition. Once this is done your ready to install CM11 and the Gapps. Choose install from zip. Find the cminstall folder you made install. then do exactly the process with the Gapps.
Android CM11 Milaq should work. This worked for me.
Hope this helps.
cheers
Data media install guide
Here is my full guide for installing Data Media Builds:
[ROM GUIDE]How to install Android 4.4.2 Data Media builds on the HP TouchPad
I have this problem
tgg05 said:
HI
I was in the same position I'd tried everything. In the end I decided to start from the beginning. What I did was pretty hardcore. I completely uninstalled Android. You need to erase the usb drive in Webos. you do this by booting into WebOS, going to settings/device info/reset options/erase USB drive. Remember before you do any of this get all you data of your device to you PC. Once this is done you are ready to install Android again. Now I found it was easier to upgrade from CM10.2 Data/Media build to CM11. So I installed Android on the device using these four files;
- moboot_38
- CM10.2,update-cm-10.2-20140126-UNOFFICIAL-tenderloin.zip
- update-gapps-jb4.3-20130813-signed.zip
- update-recovery-clockwork-no_metadata-6.0.3.6-20130926-tenderloin.zip
These files are available as a package at rootzwiki.com. There you will also find instructions on how to install android again and how to unistall android as well. Once android is installed now you need to resize the media and data partitions with tailor in webos. Now that this done you are ready to upgrade to CM11. So then booted up my device into Android. Then I connected it to my PC. enable USB conductivity on the device. I created a folder on the device on the now larger data partition (I used the same cminstall name for the folder).Transfered the CM11 (milaq version), Gapps and CMW 6.04.7 to this folder.
I would then boot into recovery. Now were going to update the CMW. choose install from zip find the folder and the CMW 6.0.4.7 file. install it.
once installed boot back into recovery. Now were going to inst CM11. First you need Perform a factory/data reset and wipe/format cache partition. Once this is done your ready to install CM11 and the Gapps. Choose install from zip. Find the cminstall folder you made install. then do exactly the process with the Gapps.
Android CM11 Milaq should work. This worked for me.
Hope this helps.
cheers
Click to expand...
Click to collapse
I am starting from a cm10.2 rom and i am encountering the same problem that the original poster is.
My HP Touchpad 16G was running CM9 for a long time. So I finally uninstalled CM9 and using TPToolbox v42 fresh installed CM12.
Before wipe everything on SDCard, I did a backup in CWM and transferred it to my PC. After installed CM12, google backup brought some of my apps back, but I still lost a lot of settings of Apps and saves of my games.
So, I was wondering if I can restore them from my CWM backup. If yes, how to restore only the Apps, not CM9?
Thanks!
shawn8888 said:
My HP Touchpad 16G was running CM9 for a long time. So I finally uninstalled CM9 and using TPToolbox v42 fresh installed CM12.
Before wipe everything on SDCard, I did a backup in CWM and transferred it to my PC. After installed CM12, google backup brought some of my apps back, but I still lost a lot of settings of Apps and saves of my games.
So, I was wondering if I can restore them from my CWM backup. If yes, how to restore only the Apps, not CM9?
Thanks!
Click to expand...
Click to collapse
You won't be able to restore your data as you've now moved from Non data media, to a data media Rom. A lot of games save their data by linking it your Google+ or Facebook accounts. You can check the options menus and connect your games to your accounts in an attempt to recover your saved games. Good luck and enjoy CM12
A lot of the old games don't link to facebook or google to save, such as "cut the rope" and "plans vs zombies" etc.
If restore is not possible from cm 9 to 12, is it possible to upgrade from cm 12 to cm 12 nightly? How?
Thanks!
shawn8888 said:
A lot of the old games don't link to facebook or google to save, such as "cut the rope" and "plans vs zombies" etc.
If restore is not possible from cm 9 to 12, is it possible to upgrade from cm 12 to cm 12 nightly? How?
Thanks!
Click to expand...
Click to collapse
Like I said you can't restore your data, you didn't exactly list which games in your question but my suggestion remains the same. Some user data will get lost during an upgrade, that's to be expected when switching android versions.
You can upgrade your CM12 nightly Rom but if you wish to keep your data I suggest using your recovery.
From the Super Easy way guide in my signature. Enjoy
How to change Roms or update your version of Android:
TPToolbox Method:
After installing a data media rom you can do a clean install of another Rom listed in the guide by again using the TPtoolbox. Return to step 5 B) and install a different Rom. The TPtoolbox will wipe the system, data and cache partitions/volumes and do a clean install, WebOS will not be changed. Your apps and user data will be lost but your media content on the SDcard remains the same. If you wish to completely remove WebOS, Android and all data on the device return to step 5 A) and do a complete data reset.
Note: When installing new roms the TPtoolbox will automatically prompt you to adjust smaller system partitions/volumes from older versions of the TPtoolbox(v40, v41x). For example a 700MB Kikat install will be increased to 800MB for Lollipop or a new Kitkat Rom install.
Recovery Method:
Updating your current Rom with a newer build can be done using your recovery and will keep your current setup and apps. However this can't be done from the TPtoolbox and will require learning about a few Rom flashing techniques from my instructional update guide below.
How to update Android 5.0.x or 4.4x Builds on the HP TouchPad