Hello,
I am getting a big problem with my HTC one here, it won't charge. It's been a problem I had for like two weeks, when I messed up the installation of a kernel. I don't know if it's related or if it's just a coincidence, but it has never happened before.
So here is what happened. I make a backup of my rom ( pranoid 4.6 BETA-2) and then install the kernel. I install it and it fails ( can't boot ) because I messed up the choice of the kernel. So I restore my backup and then boot.
Later that day I put my phone to charge, one my computer, and notice that it doesn't really charge. Like I plug the USB cable in, it charges for a few seconds, like maybe 5 but can be up to 30, it's random) and then just stop charging. And if I plug the USB cable out of my phone and put it again, it will charge again, but if I plug in and out of my comp it won't.
I tried charging it with wall adapter, same deal. But the major thing that make me almost sure that it's not hardware, if I plug it on my comp, even when the phone stops to charge, it will continue to detect and be able to access USB storage.
I wiped and flash everything I could and it stopped, just like that and started working normally again. Happened an other time, during the whole afternoon, and then worked again.
But happened to me yesterday and still haven't been able to charge it.
So I came here for help, hope some of you can help me fix this.
Thanks
if you think that this is not the hardware problem, you can try to flash RUU.
Find RUU for your CID and flash it via fastboot.
I assume, that your PC sees your phone in fastboot, right?
If you will have any questions, PM to me, coz I'm not all the time at Q&A here
Hi everyone, firs of all i want to apologize if this has been answered in some other threads but i did my research and coulndt find any solutions to my problem, that being said, here we go!.
Few days ago i noticed that my phone was dead, I thought it had just run out of battery and plugged it to the power outlet, after 10 mins i realized that it wasnt charging at all and i did a soft reset by keeping the power button pressed and voila!! it came back to life it was charging again so i took it and plugged it into my computer and there is when everything started because my computer wasnt recognizing the phone anymore. I thought that it was just that one time and so i restarted the phone and re plugged it to the computer and this time it not only wasnt recognized by it but it was not charging again and ever since I've been trying all kinds of methods to have the computer recognize the phone (different pc, diferent usb cords, reinstalled drivers, reset phone to factory settings, everything). I did find out though that if i turn the phone off and back on it'll charge and if i do it again, it wont so its like a cycle thing but the being recognized by a pc i havent been able to fix it. Any ideas?
I am running stock ATT 4.2.2 JB rom but rooted.
Thanks in advance.
Did you tried a different charger?
Sent from My LG G Flex LG-F340K Stock KitKat V20D on LTE Network using XDA Free Mobile app
I have my Desire 510 plugged into a wall outlet and I keep getting the message "Unable to charge your phone because it is using too much power. To fix this problem, reduce power consumption by turning off your phone, closing any apps you aren't using or turning off the screen"....I am rooted, have TWRP installed and a custom ROM. (Raptor ROM v1 since v2 link asks for a decryption code)...I have turned on Power Saver, Mobile data and bluetooth are disabled. The phone is losing battery power even while plugged in. I have tried 3 different chargers and outlets
EDIT: Went back to Stock ROM and its STILL having charging problems....
Dvdxploitr said:
I have my Desire 510 plugged into a wall outlet and I keep getting the message "Unable to charge your phone because it is using too much power. To fix this problem, reduce power consumption by turning off your phone, closing any apps you aren't using or turning off the screen"....I am rooted, have TWRP installed and a custom ROM. (Raptor ROM v1 since v2 link asks for a decryption code)...I have turned on Power Saver, Mobile data and bluetooth are disabled. The phone is losing battery power even while plugged in. I have tried 3 different chargers and outlets
EDIT: Went back to Stock ROM and its STILL having charging problems....
Click to expand...
Click to collapse
I've had this problem and it stopped when I took a plug from a Verizon phone and used it. It's the plug where you cannot remove the wire and plug it into a PC or another charger, but as long as you save yours, you should be ok. NO other plug would work!
MrMike2182 said:
I've had this problem and it stopped when I took a plug from a Verizon phone and used it. It's the plug where you cannot remove the wire and plug it into a PC or another charger, but as long as you save yours, you should be ok. NO other plug would work!
Click to expand...
Click to collapse
I have it plugged into a wall charger and its still giving issues (power brick with non-removeable USB cable)...i've had this phone for about 30 hours and been plugged in the whole time (minus the time it took to swap out USB cables and outlets) and it's not even gotten a full charge....i'm just gonna buy another phone.
EDIT: Just ordered a Motorla E (2015) to replace Desire 510....this phone will be thrown in a drawer
I have a stock Droid 4 with a mugen power extended battery. Last night I got a vibration that felt like a Facebook notification on my Droid 4. I pulled it out of my pocket and tried to turn it on, but the screen remained black. I tried holding the power button to reset it, but there was no response. I tried plugging it into my wall charger that usually works with a usb cable that also usually works, but even after an hour, there were no signs of life. I tried plugging in the cable to my tablet, and it charges just fine. I've used other cables and chargers, still no luck.
I tried plugging in into my laptop with the cable I normally use for charging and my laptop picked up that a device was connected. I looked in My computer to see if I could access the phone internals, but I just saw a drive letter with motocast, and 2 other drive letters that told me to insert disks in to them. The motocast drive letter had what looked like motocast system files, but that was it. I had an SD card in my phone, but no drive letters that came up when I plugged the phone it let me access it. When I went to safely remove it, I saw in the device manager that it correctly identified that a Motorola XT894 had connected to it, and I safely removed. I've tried doing a soft reset, holding the power down+vol down button for 10 secs, but that does nothing. There are no lights at all, not even when I plug/unplug it from the charger.
I'm planning on going to a cell phone repair place today to have them remove and troubleshoot the battery ( I don't have plastic torx and I'm afraid of short circuiting the motherboard)
I feel that there is some hope for fixing the problem or at least data recovery since windows recognized my phone and I could at least get to the motocast folder on it. I do wonder why my phone is able to be recognized by my computer but still show no signs of life otherwise. Any ideas?
I love this phone, but it sucks with this happening around the holiday season.If it can't be fixed, I'd at least like to get my data off it. Please help!!
Is there any way to fix this? Would physically removing and reinstalling the battery work? Do I have any options for file recovery off my phones internal storage, especially since it seems windows recgnizes that my phone is connected?
UPDATE: Got it to power on and boot normally once. Enabled USB debugging when I had the chance.
Got back from the cell phone repair place this morning. He said the battery was definitely bad, drawing zero amps. He also said he was getting weird voltage spikes throughout the board, and I think he said something about the PCMI power management chip being bad and that the phone was done for. I told him that I could plug the phone into the the computer and it recognized it. He said my best bet might be getting a battery off eBay that would power my phone long enough to get everything off of there. I asked if it could also be USB cord related as I tend to have horrible luck with them. He said it could be and that the reason that I was able to have the phone recognized by USB but not charge is due to different pins communicating during USB connection. I'm including these details so you can gauge this guy's expertise. He did go from saying the phone was done to suggesting a new battery/USB cord, and I was able to power it on after using said cord.
I went and bought a new USB cord and plugged it into my inverter I had in my car. To my surprise after a few seconds, the phone was showing the charge screen with the battery at 70%. It still wouldn't boot up so I kept it plugged in for about 5-10 mins. Eventually it did boot up. I immediately went in and enabled usb debugging. All my data was there. For a brief bit the date and time was off, but even that corrected itself. I played a song from my music collection on my SD card to make sure that was OK. The song played, and shortly thereafter it looks like the phone powered back off as it had originally done. I hooked it up to my computer and my PC started installing new hardware, it said something about xt894(my phone) a couple of disk drives and a CD ROM drive, and something about adb. The furthest they got were as unknown devices, so I disconnected them and reconnected them a couple of times, eventually the install icon went away. It still recognizes the phone and even recognizes there is a storage device with the phone in the device manager menu, but it still says "please insert a disc into drive (letter)" The drive with just motocast is still there, and I think there was another CD ROM that was recognized, said to insert a disc same as the drives. I threw it on my wall charger for a few minutes, but it still wasn't powering on. I then realized that charging it could exacerbate the voltage spikes the guy was talking about, and I didn't want to risk it especially after seeing all my data there, so I unplugged it.
I do have the battery that the extended battery replaced. It had to be pretty much tied to a charger, but it did work if only for less than half an hour. So there is the option of using that to temporarily power the phone.
My new questions are:
Am I at risk of further board damage if I charge/power on the phone? What about charging the degraded but functioning battery?
Now that I know I have USB debugging enabled and my computer still recognizes my phone, how do I go about backing up the contents of my internal storage?
Could this all be effectively solved by just getting a new battery? What about what he was saying with the weird voltage spikes and PCMI chip?
RyanV-M said:
UPDATE: Got it to power on and boot normally once. Enabled USB debugging when I had the chance.
Got back from the cell phone repair place this morning. He said the battery was definitely bad, drawing zero amps. He also said he was getting weird voltage spikes throughout the board, and I think he said something about the PCMI power management chip being bad and that the phone was done for. I told him that I could plug the phone into the the computer and it recognized it. He said my best bet might be getting a battery off eBay that would power my phone long enough to get everything off of there. I asked if it could also be USB cord related as I tend to have horrible luck with them. He said it could be and that the reason that I was able to have the phone recognized by USB but not charge is due to different pins communicating during USB connection. I'm including these details so you can gauge this guy's expertise. He did go from saying the phone was done to suggesting a new battery/USB cord, and I was able to power it on after using said cord.
I went and bought a new USB cord and plugged it into my inverter I had in my car. To my surprise after a few seconds, the phone was showing the charge screen with the battery at 70%. It still wouldn't boot up so I kept it plugged in for about 5-10 mins. Eventually it did boot up. I immediately went in and enabled usb debugging. All my data was there. For a brief bit the date and time was off, but even that corrected itself. I played a song from my music collection on my SD card to make sure that was OK. The song played, and shortly thereafter it looks like the phone powered back off as it had originally done. I hooked it up to my computer and my PC started installing new hardware, it said something about xt894(my phone) a couple of disk drives and a CD ROM drive, and something about adb. The furthest they got were as unknown devices, so I disconnected them and reconnected them a couple of times, eventually the install icon went away. It still recognizes the phone and even recognizes there is a storage device with the phone in the device manager menu, but it still says "please insert a disc into drive (letter)" The drive with just motocast is still there, and I think there was another CD ROM that was recognized, said to insert a disc same as the drives. I threw it on my wall charger for a few minutes, but it still wasn't powering on. I then realized that charging it could exacerbate the voltage spikes the guy was talking about, and I didn't want to risk it especially after seeing all my data there, so I unplugged it.
I do have the battery that the extended battery replaced. It had to be pretty much tied to a charger, but it did work if only for less than half an hour. So there is the option of using that to temporarily power the phone.
My new questions are:
Am I at risk of further board damage if I charge/power on the phone? What about charging the degraded but functioning battery?
Now that I know I have USB debugging enabled and my computer still recognizes my phone, how do I go about backing up the contents of my internal storage?
Could this all be effectively solved by just getting a new battery? What about what he was saying with the weird voltage spikes and PCMI chip?
Click to expand...
Click to collapse
Have you tried it without the extended battery. That could be the culprit of all this going on. If your original battery is bad get a new one and charge it. I had the same problem with a battery till I bought a new oem battery. After I charged my Battery I had to go to fastboot to get device to boot with a fastboot cable. Then while connected to that cable I backed up my contacts. Then while still connected to fastboot cable I flashed stock firmware and started all over again havnt had a problem since.
I'm waiting on an OEM battery to arrive. I was able to save everything off my SD card that was in the phone, so I am increasingly hopeful. Do you have to go into fastboot if your phone is stock? What is fastboot even?
RyanV-M said:
I'm waiting on an OEM battery to arrive. I was able to save everything off my SD card that was in the phone, so I am increasingly hopeful. Do you have to go into fastboot if your phone is stock? What is fastboot even?
Click to expand...
Click to collapse
AP fastboot mode is where where you flash stock while connected to rsd lite via usb or fastboot cable. It is part of bootloader. You hold down all three buttons to get to boot menu scroll down to ap fastboot then hit the vol. up button then connect to computer after you have rsd lite active. then flash stock firmware. If you get a battery that doesn't charge have them send you an other one that has happened to me a few times but not many. Remember when you scroll in boot menu you only have a few seconds to pic what you want to do or the device will try to boot.
The OEM battery I ordered finally came yesterday (no thanks to USPS). I tried multiple chargers and outlets with a good cable, and still nothing. I have another non-OEM battery arriving tomorrow, hopefully this one was just a D.O.A battery.
RyanV-M said:
The OEM battery I ordered finally came yesterday (no thanks to USPS). I tried multiple chargers and outlets with a good cable, and still nothing. I have another non-OEM battery arriving tomorrow, hopefully this one was just a D.O.A battery.
Click to expand...
Click to collapse
It was probully a dead battery. It sat for to long. If you had a fastboot cable cable you wouldn't need a battery to flash it in rsd lite or just to see if it would boot. There was this one time I had to order 3 battery's just to get one that worked. Sometimes they been sitting for to long being the device was made in 2012.
OGdroidster said:
It was probully a dead battery. It sat for to long. If you had a fastboot cable cable you wouldn't need a battery to flash it in rsd lite or just to see if it would boot. There was this one time I had to order 3 battery's just to get one that worked. Sometimes they been sitting for to long being the device was made in 2012.
Click to expand...
Click to collapse
So your saying if I had a FastBoot cable I could boot my phone without a battery in the phone? Would it wipe my internal data/OD?
Update: I have had a BIN-TEK battery charging for several hours, still nothing. Good cord and charger too. The only other options I have is the extended battery that crapped out on me but powered on briefly, or the puffed out factory battery it replaced. Things are looking bleak
OK
RyanV-M said:
So your saying if I had a FastBoot cable I could boot my phone without a battery in the phone? Would it wipe my internal data/OD?
Update: I have had a BIN-TEK battery charging for several hours, still nothing. Good cord and charger too. The only other options I have is the extended battery that crapped out on me but powered on briefly, or the puffed out factory battery it replaced. Things are looking bleak
Click to expand...
Click to collapse
It is so you you can get to fastboot mode so you can flash. It is usable with a low battery or no battery at all. When you first connect it to computer it will automatically start booting. Here is a link for one: https://www.amazon.com/gp/aw/d/B00K...boot+cable&dpPl=1&dpID=41ep3FoxgHL&ref=plSrch
If it boots to your ROM when you first connect it then you have battery problem. If it does not boot to rom then you should leave it connected and flash stock firmware from fastboot mode witch you will need rsd lite to flash. If it boots after that then it us just a battery problem. If nothing happens then you probully need a new droid 4. Remember once you disconnect fastboot cable device will go off. So don't disconnect until you are done with everything being that you don't have a good battery.
I have a fastboot cable now. Haven't tried anything yet but I plan to today. I've looked around XDA for firmware If I need to flash stock firmware, I found several versions for the Droid 4 here:https://forum.xda-developers.com/droid-4/general/droid-4-xt894-firmware-mirrors-2015-t3004048 how do I know which firmware is correct?
Also, am I good to disconnect the fastboot cable from the PC as long as I am NOT in the process of flashing firmware?
I have ADB debugging enabled on my phone, and last I checked my computer recognized my phone, just couldn't access internal files on my phone. (Had "Please insert disk into drive x" message) Any options there?
RyanV-M said:
I have a fastboot cable now. Haven't tried anything yet but I plan to today. I've looked around XDA for firmware If I need to flash stock firmware, I found several versions for the Droid 4 here:https://forum.xda-developers.com/droid-4/general/droid-4-xt894-firmware-mirrors-2015-t3004048 how do I know which firmware is correct?
Also, am I good to disconnect the fastboot cable from the PC as long as I am NOT in the process of flashing firmware?
I have ADB debugging enabled on my phone, and last I checked my computer recognized my phone, just couldn't access internal files on my phone. (Had "Please insert disk into drive x" message) Any options there?
Click to expand...
Click to collapse
You have the right index get the one says
4.1.2 - VRZ_XT894_9.8.2O-72_VZW-18-8_CFC.xml.zip just in case you need to flash. just connect cable and see if device boots if not flash the firmware with rsd lite. never umplug cable unless you want the device off because when cable is is pulled the device will go off.
I connected the fastboot cable without a battery in the phone. Held power button, computer detected it. Said it had found an XT894 and Motorola Network drivers or something like that. Said my installed hardware was ready to use. Noticed in device manager and network connections that Motorola USB networking driver #3 was installed. Under My computer, didn't see any new hard drives. I have RSD lite and the firmware you told me to get. RSD light shows my phone model, imei, software, ect and says that I am connected. But there has been no activity on my phone's screen. No Motorola logo, no menu's, nothing. I would feel more comfortable if I could pull my data off before I flash the phone as I have read horror stories of flashing gone wrong. Is there some way I can access my phone's memory since the computer recognizes it and backup my files before I flash?
RyanV-M said:
I connected the fastboot cable without a battery in the phone. Held power button, computer detected it. Said it had found an XT894 and Motorola Network drivers or something like that. Said my installed hardware was ready to use. Noticed in device manager and network connections that Motorola USB networking driver #3 was installed. Under My computer, didn't see any new hard drives. I have RSD lite and the firmware you told me to get. RSD light shows my phone model, imei, software, ect and says that I am connected. But there has been no activity on my phone's screen. No Motorola logo, no menu's, nothing. I would feel more comfortable if I could pull my data off before I flash the phone as I have read horror stories of flashing gone wrong. Is there some way I can access my phone's memory since the computer recognizes it and backup my files before I flash?
Click to expand...
Click to collapse
When the device is off just connect the device to your machine and it will boot to your rom thats it. It will do it automatically. No need turn it on yourself. If it wont boot then something is wrong with the rom. If that happens and you were running a custom rom and not stock go to safe strap if you had it installed and use that to boot back into stock rom slot. Now you have two scenarios you can use. Do the first one I wrote first. If you Have safestrap installed then do that if it wont boot. Dont forget to have to have the drivers installed for the device on your windows machine. On windows based systems you have to have the drivers installed installed before using rsd lite. Just in case I forgot to mention that.
My ROM and phone is stock
Another update: I'm trying to use ADB to backup my phones files before I flash. Here is what happened:
Sorry for the lack of updates, been busy. Anyways, I got adb installed, plugged in my phone, did adb>devices, didn't show up.I got the newest version of Motorola device managermanager and had it update. Plugged in my phone again, computer said it found an XT894 and Motorola USB networking device, told me to restart my computer. Restarted, tried to see if adb detected it, nothing. It shows up in my device manager under networking devices, it even says the location is an XT894. But adb still doesn't see it.
The weird part is that RSD can see my phone too along with device manager. I'm planning on flashing to see if I can unbrick my phone, however I want to try and backup my files on there just in case the flash wipes my phone.
Is there a way I can have my computer recognize my phone as a drive instead of a networking device so I can get my files?
Is there any way to get my data off my phone before I flash?
RyanV-M said:
My ROM and phone is stock
Another update: I'm trying to use ADB to backup my phones files before I flash. Here is what happened:
Sorry for the lack of updates, been busy. Anyways, I got adb installed, plugged in my phone, did adb>devices, didn't show up.I got the newest version of Motorola device managermanager and had it update. Plugged in my phone again, computer said it found an XT894 and Motorola USB networking device, told me to restart my computer. Restarted, tried to see if adb detected it, nothing. It shows up in my device manager under networking devices, it even says the location is an XT894. But adb still doesn't see it.
The weird part is that RSD can see my phone too along with device manager. I'm planning on flashing to see if I can unbrick my phone, however I want to try and backup my files on there just in case the flash wipes my phone.
Is there a way I can have my computer recognize my phone as a drive instead of a networking device so I can get my files?
Is there any way to get my data off my phone before I flash?
Click to expand...
Click to collapse
The only thing I can think of at the moment is safestrap If you had it installed before you bricked the device then you could try booting to safestrap and then mount device in safestrap and copy and paste all your internel sd stuff you want to keep. If you did not have safestrap installed then make sure you have correct drivers for device installed and try the adb command again and see if it reads. I'v been in your situation thats why once a month I now back new stuff up. When I had the s3 I bricked during bootloader unlock. Took me three days with an image file to get it to boot. Then I reflashed the stock and didnt need the image file any more. That was long time ago. i learned to back my stuff up after that. I just thought I would mention that just so you could have a food for thought. Also data will be lost is another reason to back stuff up.