d4 Screen lags touch input??? - Motorola Droid 4

I recently got a replacement phone from esurance for a broken Droid x2. They sent me a droid 4, which I had no objections against given the great specs comparatively.
I read reviews on the screen being low quality, viewing wise, and this is not the issue I have with the phone. Coming from a dx2, the quality is not that different.
My problem is that there appears to be a lag between when i touch the screen and when it starts reading the input. A simple test to show what I am talking about is as follows;
Download multi touch paint or another paint app. If I swipe my finger across the screen as fast as i can, I can get 2/3 of the way across the screen before it draws anything.
This half second delay makes typing on the screen nearly impossible...It only picks up about half of the letters I press when typing normally like I would on a Dx2. To be clear, its not inputing the wrong letters because i am not used to the phone.. Its not inputting anything on about half of my keypresses.
I am on the latest official (nonleaked) version of android. Unrooted.
Should I RMA it again? Is there a fix, and has anyone else experienced it?
Thanks for any help!

over 150 views and no reply yet? I dont mean to rush things along, I just wanna make sure i did everything right.. Im in the right section?
If nothing else, could someone else tell me whether they have similar results?
Is typing horrible for everyone on the onscreen keyboard?

I don't use the on screen keyboard much but the few times I have I have not noticed any lag. Sounds like a hardware issue to me.

I'd do a factory reset (yeah yeah, I know). If that doesn't fix it, you can either RMA it again or try to install a 3rd party rom and see if that helps things.
What you are describing is definitely not normal.

Factory reset actually cleared up my issues =) thanks!

Related

Best way to fix keyboard repeates without taking apart?

Im sure a fair number of you will have experienced the same thing where you press a key once and you get like 3 of that letter and sometimes for me the Fn key doesnt work too well either
i've tried like swirling the keys around to move dust etc but it didnt help
maybe i should just send it back? becuase its really annoying
I also have this problem sometimes. Thought it might be a software problem or so, but maybe you are right and particles are collecting there.
Did someone try that on X1?
Well, if there was such a solution I wouldn't have to send my X1 to the service centre. And just delaying it as much as possible, but given that my warranty ends next week, I'd probably have to go down soon. And anyway, it's not just repeats that I'm facing. Sometimes it's the other way round, as in the keyboard not responding unless I press the key down real hard.
Mopral said:
Did someone try that on X1?
Click to expand...
Click to collapse
just tried, and seems to work! thanks
settings-personal-buttons-up/down control
delay before first repeat set to long
repeat rate 3 from fast
works good!
I'd say it works about 80-90%. It does save the X1 from the trash piles, so kudos to the friendly guy who dug up the solution, and no kudos to SE and/or MS who can't think of fine-tuning the keyboard settings before they ship a product that was $800-900 unlocked at launch.
Caveat and an inappropriate rant: I remember doing so much research, and everyone across so many different forums said a hardware keyboard is the way to go if you do a lot of texting. Not true. I find that hardware keyboards require a lot of efforts to press compared to a virtual keyboard, even worse if it's not spaciously laid out, and even worse if, unlike the X1, the positioning of the keys relative to each other is off.
Truth is I type even faster on an iPhone/ipod touch than an X1, without feeling like an RSI is coming on, and it's not because of predictive text entry. It's because my thumbs can use a lot less force on the keys. I believe most people still press way too hard on a touch screen trying to be control freaks.
So the keyboard may be 80-90% improved, but I've got my budget ready for an iPhone. And no more listening, no more being open to suggestions!
beingthere said:
Caveat and an inappropriate rant: I remember doing so much research, and everyone across so many different forums said a hardware keyboard is the way to go if you do a lot of texting. Not true. I find that hardware keyboards require a lot of efforts to press compared to a virtual keyboard, even worse if it's not spaciously laid out, and even worse if, unlike the X1, the positioning of the keys relative to each other is off.
Click to expand...
Click to collapse
Well, I don't want to live without h/w keyboard anymore. And I did a fast typing challenge against an iPhone and won. The guy who wrote on that iPhone was a real freak, had an iPhone since it came out and types really fast...but I love the h/w keyboard on the xperia. If it would not have this double-letter error I would love it even more...Now I'm going to fix it with the solution mentioned above. Thanks!
I just want to add one thing...
The reason I say the fix is 80-90%, is because I think CPU speed and/or power settings might contribute somewhat to the keyboard issue. Once last week, I had the phone plugged into AC, and the keyboard suddenly became free of issues, and responded properly to my typical typing efforts.
Using nueCPL-ClockSpeed v1.3 in an unscientific test, the keyboard produces more mistakes on a lower speed (384MHz), but its Max Performance setting didn't exactly reproduce the AC power remedy.
This is not a very stringent observation at all, but since I am stuck with the X1 for a while, I'll keep on trying I'm betting that the next iPhone will be a significant update, so I have to hold off the purchase for now... and kiss NRGZ28's toes for his rom's.
Sapa13 said:
just tried, and seems to work! thanks
settings-personal-buttons-up/down control
delay before first repeat set to long
repeat rate 3 from fast
works good!
Click to expand...
Click to collapse
for two days, since i set this way, not even one double or missed letter!
i've done everything you've all said but it doesnt work does that mean it is a physical problem?
comeradealexi said:
i've done everything you've all said but it doesnt work does that mean it is a physical problem?
Click to expand...
Click to collapse
really dont know, since i set that way no problem at all.. maybe dirt came under your keyboard

Capacitive Button Responsiveness?

Recently, I've been considering getting a Nexus One, however, most of the reviews I read say that the N1's capacitive buttons are a little unresponsive. You must tap the upper half of the button as opposed to the bottom half of the button.
I've also read that some of the cyanogen roms have fixed this problem. Can anyone give me more insight on this issue?
I've never had a problem with mine.
I saw a review saying that they got in the way when typing w/ the onscreen keyboard, but I haven't even had that, and I'd like to think that I have pretty normal-sized fingers.
Some people have problems, others don't i personally haven't. I wouldn't consider it to be something important enough to sway me from a sale though.
Stock Rom had this issue. If you unlock your bootloader, all the kernels (and mods) available now have a fix for this, as well as a few other things.
Im sure when 2.2 update comes out this fix will be passed on to the stock version too (at least as far as im aware it hasnt already!?). So tbh this isnt an issue for you not to get a nexus one...also, there's no point getting a nexus one if ur too scared to unlock the bootloader!!
adam18488 said:
Stock Rom had this issue. If you unlock your bootloader, all the kernels (and mods) available now have a fix for this, as well as a few other things.
Im sure when 2.2 update comes out this fix will be passed on to the stock version too (at least as far as im aware it hasnt already!?). So tbh this isnt an issue for you not to get a nexus one...also, there's no point getting a nexus one if ur too scared to unlock the bootloader!!
Click to expand...
Click to collapse
Definitely! That's one of the biggest reasons why I want an N1. It has a good root and dev community and gets android updates first.
I just thought it'd be annoying to have to use a phone with crappy capacitive buttons, but I'm glad to hear that the problem has been fixed.
The only other thing I'm worried about is the dualtouch but it's most definitely going to get fixed in the next update.
Thanks to everyone for their input. I'll definitely be picking up an N1 soon
I have rooted and custom roms etc and I still hate the capacitive buttons with a passion. They are not nearly enough to topple the overall awesome that is the N1 but man I hate those things.
I only hate those buttons, when Nex is in my car mount!
adam18488 said:
Stock Rom had this issue. If you unlock your bootloader, all the kernels (and mods) available now have a fix for this, as well as a few other things.
Click to expand...
Click to collapse
Is this true? I've tried plenty of ROMs and kernels and I don't remember any of them changing the button sensitivity.
The best way to show off how frustrating the buttons can be is to give the phone to someone that's never played with it before and watch as they struggle to register touches on the buttons. The people that use the phone daily have recognized that the touchpad is above the button and never think about it any more.
It's very apparent as soon as you rotate the phone into a different position though.
PrawnPoBoy said:
Is this true? I've tried plenty of ROMs and kernels and I don't remember any of them changing the button sensitivity.
The best way to show off how frustrating the buttons can be is to give the phone to someone that's never played with it before and watch as they struggle to register touches on the buttons. The people that use the phone daily have recognized that the touchpad is above the button and never think about it any more.
It's very apparent as soon as you rotate the phone into a different position though.
Click to expand...
Click to collapse
I also haven't noticed any change in the sensitivity with different ROMs or kernels. For me though, sometimes if I hit right on top of the button it won't register. I am used to just tapping it a little above and it works everytime.
As others have said, this is definitely not a deal breaker for me or shouldn't be for any person IMO. This phone's pros far outweigh the cons.
The best way to show off how frustrating the buttons can be is to give the phone to someone that's never played with it before and watch as they struggle to register touches on the buttons. The people that use the phone daily have recognized that the touchpad is above the button and never think about it any more.
Click to expand...
Click to collapse
When someone is doing that you should just say that it has Finger print authentication technology
absolutely true and this was my discovery today (day 4 with n1). the buttons work fine if you cheat towards the top of the button area and overlap into the screen area.
that solved it for me.
resolved for me for now...
xboomer55 said:
absolutely true and this was my discovery today (day 4 with n1). the buttons work fine if you cheat towards the top of the button area and overlap into the screen area.
that solved it for me.
resolved for me for now...
Click to expand...
Click to collapse
Did you just buy your N1 from Google brand new?
Those buttons are a pain in the bum, but you get used to them, the bigger problem is if the phone gets too cold it starts mis-registering the touchscreen necessitating a reboot or a bunch of mucking around to fix it. This is the biggest annoyance with the phone for me, hopefully they fix the screen calibration in 2.2!
Almost swapped mine for a Desire, thinking less of doing so now, unless anyone can offer a good reason
I got my N1 straight from Google on day one, and I'm currently running CM 5.06
I find the capacitive buttons to be _awful_ if I tap directly on them it takes 2-5 attempts to get it to register.
However, I have found that if I swipe from the button down off the bottom of the button it registers ever single time.
I'm pretty convinced that the problem isn't the digitiser itself but in the driver that splits that section of the digitiser off. I believe it checks to see if there is upward movement before registering a button tap and if it does detect upward motion it cancels the tap event and forwards the event as a touch screen event. I also thing that because I have pretty big fingers any time I press the flattening of my finger registers as a slight upward motion.
If I could find the button "sub"-driver I'd be hacking at it right now.
Still, I wouldn't give up my N1.
SilentMobius said:
I got my N1 straight from Google on day one, and I'm currently running CM 5.06
I find the capacitive buttons to be _awful_ if I tap directly on them it takes 2-5 attempts to get it to register.
However, I have found that if I swipe from the button down off the bottom of the button it registers ever single time.
I'm pretty convinced that the problem isn't the digitiser itself but in the driver that splits that section of the digitiser off. I believe it checks to see if there is upward movement before registering a button tap and if it does detect upward motion it cancels the tap event and forwards the event as a touch screen event. I also thing that because I have pretty big fingers any time I press the flattening of my finger registers as a slight upward motion.
If I could find the button "sub"-driver I'd be hacking at it right now.
Still, I wouldn't give up my N1.
Click to expand...
Click to collapse
Just realized that!!
It does not get the upward movement
It gets: right, left & down
So this means, one could set different options for different directions...
hacker01 said:
Recently, I've been considering getting a Nexus One, however, most of the reviews I read say that the N1's capacitive buttons are a little unresponsive. You must tap the upper half of the button as opposed to the bottom half of the button.
I've also read that some of the cyanogen roms have fixed this problem. Can anyone give me more insight on this issue?
Click to expand...
Click to collapse
I have noticed no issues when holding the phone in my hands but the responsiveness is not that great if the phone is flat on a desk or a similar surface. I wonder what if anything the accelerometer may play a factor.
PrawnPoBoy said:
Is this true? I've tried plenty of ROMs and kernels and I don't remember any of them changing the button sensitivity.
The best way to show off how frustrating the buttons can be is to give the phone to someone that's never played with it before and watch as they struggle to register touches on the buttons. The people that use the phone daily have recognized that the touchpad is above the button and never think about it any more.
It's very apparent as soon as you rotate the phone into a different position though.
Click to expand...
Click to collapse
I dunna man, my 3-year-old daughter figured it out within a minute of getting my phone. I set her up in a game and she decided she wanted something else, so she messed with the capacitive buttons until she got out of the game. Once she had it once or twice (~5-10 seconds for her to figure out each time) it was pretty much instant after that. If a 3-yo can figure it out, I'm pretty sure it's not THAT difficult. Annoying, sure....but not difficult.
hacker01 said:
Did you just buy your N1 from Google brand new?
Click to expand...
Click to collapse
Yes. Direct from Google.
Wow there's definitely a good mix of answers. I thought that the newer batches of N1's fixed the capacitive button problem, but apparently not.
I guess there's not a definite answer. It seems the only conclusion you can make is that some N1's may still have the problem, some may not. Some can be fixed with custom roms and unlocking the bootloader and some cannot. Your results may very.
EDIT: After rereading some of the previous posts (more carefully. excuse my sleep deprived state lol), the capacitive button issue might actually be more of a feature than an issue. I've read similar posts about the capacitive buttons having that sort of "motion detection" thing to prevent accident presses. Hopefully for anyone still having the problem, you can reread some of the posts on this page and give their methods a try
I haven't had a problem with mine but I haven't had the problems most people say they have with the phone so I would recommend this phone to anyone that wants an android phone
-------------------------------------
Sent from my Nexus One

[Q] Screen inaccuracy issues

I know that this has been a fairly common complaint about the Nexus One but i'm wondering, roughly what percentage of people actually have this issue? To clarify, i mean the problem whereby touching the screen in one place is actually registering elsewhere on the screen.
I've had this problem since buying my n1 and having to constantly turn the screen off and back on again was driving me nuts. Finally i sent the unit back to Vodafone for repair and they in turn sent it to HTC to be fixed. So yesterday i got it back with an enclosed statement along the lines of "we have fixed your fault etc..".
Three minutes into using the damn thing and the fault crops up again. So much for that! To be fair to Vodafone they are sending out a replacement unit now but of course i'm concerned that even that will have the same issue.
What are the odds?
Here is the same.
To developers: the fact that resetting the screen fix the problem makes me to ask if there isn't a way to make the screen re-calibrate itself every X seconds/minutes, without shut off and on the screen every time. Seems to be until now the only solution to this extremely annoying issue.
It really is a bizarre one. I've seen people discussing whether it's a hardware or software issue but nobody seems to have a definitive answer. If it were a hardware problem, surely it would be constant/permanent? If it's a software issue i would have thought that somebody would have bug-fixed it by now? Especially as it seems so prevailant.
I'm stumped!
Other than this one problem though i am completely in love with this phone. The device itself feels solid, durable and pleasant to use. Android is improving all the time and it always impresses when you demonstrate to the un-initiated what the device is capable of. So close to perfect...but not quite!
EDIT... This from the wiki.. "- Q5: Sometimes my screen registers touches in incorrect places, and I need to turn the phone off and on to make it work correctly again
A: This is a hardware problem, nothing can be done about it. Nexus One's digitizer sucks.
Ho-Hum.
I have experienced this problem on android 2.1 ever since upgrading 2.2/2.2.1, I haven't had the problem. I'm very happy with my screen
Sent from my Nexus One using XDA App
msavic6 said:
I have experienced this problem on android 2.1 ever since upgrading 2.2/2.2.1, I haven't had the problem. I'm very happy with my screen
Sent from my Nexus One using XDA App
Click to expand...
Click to collapse
That suggests a software problem although i have had it on 2.1, 2.2 and now 2.2.1. I would say that it has happened to me within three minutes of using the phone, 50% of the time within that three minute window. In other words it's cropped up in half the texts/emails i have sent where i have had to do the screen off/on thing to complete the message.
Very annoying.
It has to do mostly with the way people hold their phones, the possibility of registering false touches - including, for example, touching the screen with fingers that aren't completely dry. Some have the issue more than others.
HW issues still can have SW workarounds sometimes. I'm not sure if it's the case. HW and SW need to be analyzed to find one, if exists.
There is no "calibrating" capacitive touchscreen. Resetting its controller might have effects like missing touches and other random screen misbehavior (for example - if the controller is tracking fingers, resetting it would cause it to lose the tracking).
Since getting my phone back from 'repair' the issue is less frequent, suggesting that it's not a usage problem as i'm obviously still using the phone in the same manner as before. Instead it seems that various devices suffer from the problem in varying degrees.
I suppose if i knew what they had actually done to the phone while it was being tended to it might help us discover why the frequency of the problem has been reduced. I know that the digitizer wasn't replaced as the phone came back with the same screen protector on it as it had when i sent it off. That being said, they obviously did something. I just don't know what!
Most probably replaced the phone's MB.
Try upgrading to the latest radio - the issue will probably not be 100% solved, but now I only get it maybe once a month or so...
I may tell them not to bother sending out a replacement. It's happening far less often since it was returned and (going by the poll results), there's a good chance that the replacement could actually be worse than this one is now.
Perhaps the 2.3 update will jar something loose.
ATTENTION PLEASE!!
after flashing miui latest ROM i've never had touchscreen issues anymore in over 20 hours of hard usage (also with the phone in charge!!).
I don't believe is a coincidence, developers please ask miui developers if they have integrated a code to fix this issues.
Thanks!
Sent from my Nexus One using XDA App
pyngwie said:
ATTENTION PLEASE!!
after flashing miui latest ROM i've never had touchscreen issues anymore in over 20 hours of hard usage (also with the phone in charge!!).
I don't believe is a coincidence, developers please ask miui developers if they have integrated a code to fix this issues.
Thanks!
Sent from my Nexus One using XDA App
Click to expand...
Click to collapse
could you please download Multitouch Visible Test
http://www.appbrain.com/app/multitouch-visible-test/com.batterypoweredgames.mtvistest
and report back?
xyellx said:
could you please download Multitouch Visible Test
http://www.appbrain.com/app/multitouch-visible-test/com.batterypoweredgames.mtvistest
and report back?
Click to expand...
Click to collapse
I have already restored cyano 6.1.1.
However, about "multitouch issues" I mean inaccuracy, the fact that the touch is recognised in another point of the screen (particularly when you press the bottom part of the panel). I didn't verified the axes-inversion issue, but I'm almost sure that it persists.
The "touch inaccuracy" is nothing else than the usual axis-swapping thing. When accidental dual touches (palm/holding fingers/water/etc) happen, the digitizer goes nuts.
Jack_R1 said:
The "touch inaccuracy" is nothing else than the usual axis-swapping thing. When accidental dual touches (palm/holding fingers/water/etc) happen, the digitizer goes nuts.
Click to expand...
Click to collapse
I don't think so....I pay attentions when the screen goes crazy. I'm absolutely sure that (in charge for example) my touch is ONE.
The only times I was able to trigger the "screen nuts" effect, were when I was typing 2-fingered, and fast - making it register dual touches. Moreover, sometimes a single touch with a single finger is reported as series of touches. Once it happens, it stays until screen off.
Jack_R1 said:
Moreover, sometimes a single touch with a single finger is reported as series of touches. Once it happens, it stays until screen off.
Click to expand...
Click to collapse
I mean this....since I moved to MIUI this is not happened anymore.
Since I uninstalled Htcime the inaccuracy issues seem less so far! Almost only with the phone under charge ...much much better than before! Dunno why....
Sent from my Nexus One using XDA App

[Q] Bad Digitizer?

I've noticed the last few days that my nc has a hard time unlocking. I start to swipe my finger across the unlock and it moves about 1/10 of the screen then shoots back. If I do it a few times, I might get lucky and unlock it.
Does this sound like the digitizer is going out? It's one of the first production models (wife bought it for me for christmas right after they came into the store). So I don't know if there was an issue with them at all or not.
Everywhere else on the screen seems to be fine, but it doesn't do me much good if I can't open the thing to read the books inside.
*edit
Just did a test on the bottom row of books, and they seem to be working fine in that general area. Is anyone else seeing this only when trying to unlock the nc from sleep/off?
Do you have it plugged in?
Yeah it seems to happen on my girlfriends NC, at least when it was running 1.1 Stock, not sure I've noticed it since 1.2. It's not a bad digitizer assuming you have the same issue which was right after resuming from sleep it will SOMETIMES be a little pokey for the first 20 seconds or so but after that it slides smooth as butter. It never really bothered me since I just assumed it was reloading some software into memory. The only other common issues I know of are issues when plugged in as mentioned above and the seemingly obvious but often overlooked dirty screen.
I do notice in general that both NC's I use are a little less than perfect when touching the far corners (I often need to jab while making grunting sounds) but I figure it's an e-reader so they probably didn't spend a fortune on the capacitive part of the screen. If you are so inclined, loading up CM7 disables the lock screen by default and there might be a way to do it in stock as well although I suspect you will still occasionally need to give it it's 20 seconds to get things running again.

Getting a better look at this multitouch issue, with some good ol' community feedback

Hey guys,
Thought I'd post this here and keep you guys updated on further developments.
I live in the Netherlands and bought a 32GB version at Dixons at the 13th of November 2012
I had found the touchscreen a bit unresponsive sometimes in the past.
But couldn't really find out why it was acting up. I finally isolated the issue.
It is exactly the same as this guys vid:
(Thanks for the vid injahnet)
Together with a little backlight bleeding, I decided to send for repair.
(The problem persisted after a factory reset, no other apps were open when testing.)
I went back to Dixons and showed the problem to the Dixons dude.
He acknowledged there was an issue and sent it for repairs or replacement.
Due to the holidays this can take some time. Maybe even next year
I was about to open my tablet for a look inside one of these days, boy am I glad I didn't do that yet
Anyway to get a good view on this issue globally, are there more people that have the same issue?
You could go to: Settings > Developer options > and then under "Input" you can enable Show touches. and try to to the same procedure as in the vid. (Thanks Peterk-1)
Or you could test with MultiTouchTester like Injahnet.
The weird thing is, my dad's N7 16GB does the same.
Update 17-12-2012: Please do not test while plugged in as the device will be grounded and the issue will not occur. (Thanks dad)
Feedback is really appreciated!
Please vote in the poll above!
Cheers,
Daan
I have zero problems with multitouch while using my Nexus 7. Working just fine, but you must disable any apps which interfere with gestures or it'll steal events.
Can't say I've ever used multitouch with the N7 laying on a random object however.
But sure, send it in for repair......... I'll keep using mine.
If anyone thinks they have multi touch problems then loading an app isn't required. Just go into Developer Options and under Input you have two options to display touch and track detail.
peterk-1 said:
If anyone thinks they have multi touch problems then loading an app isn't required. Just go into Developer Options and under Input you have two options to display touch and track detail.
Click to expand...
Click to collapse
Nice one. I'll add that.
khaytsus said:
I have zero problems with multitouch while using my Nexus 7. Working just fine, but you must disable any apps which interfere with gestures or it'll steal events.
Can't say I've ever used multitouch with the N7 laying on a random object however.
But sure, send it in for repair......... I'll keep using mine.
Click to expand...
Click to collapse
I've done a factory reset before I tested No apps are open except MultiTouchTester
It's in for repairs
Well... Over 200 views. And only 4 votes, which includes mine
Community feedback is failing hard.
Anyway, I'll keep you guys posted on the repaired Nexus.
At the moment of writing we know that three people are having this issue.
I know someone else with a nexus I'll check if he has the issue too.
Cheers,
Daan
Yes, i have this problem. And only while device is laying on the table.
Wow, this is bizarre, thanks for pointing it out. I can confirm it happens when it's laying on my pillow, and doesn't when I'm holding it.
Thanks for the vote guys.
By the way, it seems obvious that the Nexus should not be plugged in while testing.
However I cannot test this 'cause mine is at the shop
Would anyone be willing to test?
I'll add that in the original post (+ a mention of your name and a thank you of course))
Cheers,
Daan
Mine was unplugged while testing.
Sent from my Nexus 7 using Tapatalk 2
if the two touch-points got the same X or Y coordinate my nex7 does only detect one of them. i don't think this is an issue.
herrrevo said:
if the two touch-points got the same X or Y coordinate my nex7 does only detect one of them. i don't think this is an issue.
Click to expand...
Click to collapse
However, zooming in Google maps for example will become quite difficult
Anyone try and see if taping the ground pin on the wifi antenna fixes the issue? This seams like a grounding problem.
ionstorm66 said:
Anyone try and see if taping the ground pin on the wifi antenna fixes the issue? This seams like a grounding problem.
Click to expand...
Click to collapse
Exactly! I was also thinking of this.
Do people who have this issue also have the flickering issue!?
ecoviws buttress
Just an FYI, I installed CM 10.1 with Trinty Seven. Now I get 10 touches on pretty much any surface.
I don't have a multitouch issue, but I do have an entire band on my screen which has stopped responding to touch at times. It all started when I let my tab shut down due to low battery. Initially, the Nexus 7 neither charged (when put on charging, obviously), nor did it boot up. After trying for several hours, somehow it started charging. And since then, sometimes certain areas of my touchscreen become unresponsive to touch. Since the band which is unresponsive is towards the upper part of the screen, using notifications becomes completely impossible. It keeps 'snapping back up' when I try to pull it down, cos while I am pulling it down, the notification tray encounters an unresponsive area, so it just goes back up. Called up Google and they will be sending a replacement device. All I am afraid about is that I have an 8gb version, and they would be sending an 8gb as well, so I hope it isn't refurbished or something, as Asus has stopped making the 8gig model.
I'm having an issue where the screen, ( mostly in a webpage or document,) starts moving up and down and zooming in and out without my input.
Sent from my Nexus 7 using xda app-developers app
Just tested this out and yes, my device is doing it too. Interesting. No other issues like screen flicker (except the auto brightness bug in 4.2). My n7 is c9O
DaanJordaan said:
Well... Over 200 views. And only 4 votes, which includes mine
Community feedback is failing hard.
Anyway, I'll keep you guys posted on the repaired Nexus.
At the moment of writing we know that three people are having this issue.
I know someone else with a nexus I'll check if he has the issue too.
Cheers,
Daan
Click to expand...
Click to collapse
community feedback is not failing hard, more like you're just starting a new thread without bothering to search if issue/topic already exist.
this isn't new and there is no fix, that is just how the touchscreen function. the N7 isn't the only device to have this.
dilldoe said:
community feedback is not failing hard, more like you're just starting a new thread without bothering to search if issue/topic already exist.
this isn't new and there is no fix, that is just how the touchscreen function. the N7 isn't the only device to have this.
Click to expand...
Click to collapse
Don't feed the trolls!
Must... not... feed... aaargh....
You are kinda missing the point of this thread.
It is to see how many people have this issue.
There is no thread capturing that in an easy way unless you want to count every post.
Now please tell your brain to start functioning again and leave this thread alone if you have nothing to add.
Asus Google Nexus 7 32GB touch death zone
Hi DaanJordaan,
Found out that my brand new N7 seems to have a similar "no touch zone" issue; an area the size of my little finger on the left lower part of my screen does not seem to react to touch! It interferes with typing the keyboard in portrait mode (no keyboard problems in up-side-down portrait mode).
When I use the Easylabs Multi Touch test I can see the dot changing color when I move over this area, doesn't happen anywhere else on the screen..
Using the developer tools (turning on the two options that allows to show touch/leave a trail of touch) it becomes even more clear that this area does not react to touch! I can "paint" lines around the "no touch zone" (it actually splits into 2 touch areas using one finger around the "death spot"), and the "no touch zone" reveals itself by not showing any trail/history line of touch..
Oh yes, and it does not matter if I lay the N7 on the table, or hold it in my hand, the issue is always there.
Therefore I returned the N7 back to the MediaMarkt, and they will send it in for repairs...
I've got a bad feeling about this | - )
I am curious to hear about experiences with your N7, once you have it back!
I'll report mine here, in three weeks or so (that's the outlook...).
Cheers!
NeverMind

Categories

Resources