[Q] can't flash LPF - Galaxy Note GT-N7000 Q&A, Help & Troubleshooting

when i use PC odin flash LPF rom in download mode i try this:
http://dl.xda-developers.com/attach...92816e6d85df/4fb57e17/1/0/6/7/6/0/3/n7000.jpg
i ready to change USB port,reinstall driver,change diff version odin 1.83,1.85,1.87
all version is got too.
my rom from I9220 repack(splash screen is i9220) -> LPY = current
but i usually my note. it not happen
how can i flash new bootloader and LPF
help me please..
sorry for my ba english

did you wipe, format, "factory reset" before that?
the picture tells the same story that is well known today: hardbricked phone.
sorry to tell you that.

Image says, you entered in dark world.
Able to enter recovery/Download mode?

Go here, to switch to another bootloader. You are on the repack bootloader that will cause all ODIN flashes to fail (Except Repack roms anyway)
You should then be good to go

hkgrob said:
You are on the repack bootloader that will cause all ODIN flashes to fail (Except Repack roms anyway)
Click to expand...
Click to collapse
This is highly inaccurate.
I used PC Odin at least 5-6 times whilst on this or that Repack-based Rom, and each time it was a success.

chasmodo said:
This is highly inaccurate.
I used PC Odin at least 5-6 times whilst on this or that Repack-based Rom, and each time it was a success.
Click to expand...
Click to collapse
OK, to clarify. He likely flashed LP5/6 repack. Therefore, he flashed the new I9220 bootloader, the same variety that Chainfire told everyone not to flash.
His symptom is that PC Odin wont flash anything. Therefore, as above...
EDIT: Chasmodo, I highly doubt that you flashed the full LP5/6 Repack ROM, bootloader and all ;-)

hkgrob said:
Go here, to switch to another bootloader. You are on the repack bootloader that will cause all ODIN flashes to fail (Except Repack roms anyway)
You should then be good to go
Click to expand...
Click to collapse
i follow http://forum.xda-developers.com/showthread.php?t=1660012
now my note is worked. and come back to N7000 loader
problem solved!
thank for any help

Glad it worked out raziliaz
See Chas... ;-)

hkgrob said:
Glad it worked out raziliaz
See Chas... ;-)
Click to expand...
Click to collapse
I stand corrected.

Related

[Q] Bricked device caused by broken TWLauncher

G'evening guys,
got a little bit of a problem here. My (european) Samsung Galaxy S is screwed. As soon as I boot it up, it loads a custom flashed TWLauncher which immediatly crashes. I can click the message away, but then after a few vibrations it will crash again. I can put it in Kies Mode, but I can't get Kies on Win to start some kind of recovery.
If I try to get into the bootloader, I'm only gonna see the default Samsung bootloader. I tried to push an update.zip on the phone, but it would not install due to some kind of signature errors.
Story first:
1. Rooted it with Superoneclick v1.4
2. Installed Recovery Manager. Not sure if some kind of recovery has been installed, at least none permanent.
3. Updated TWLauncher with SGS Tools in Flash
4. Did a factory wipe
I already tried loading a custom firmware via Update.zip and searched for an official update.zip, but didn't found one.
Also tried to push an older TWLauncher via adb, but this failed as I couldn't use su.
So, does anybody have a clue on how to solve this? Or will the only way to fix it be a send-in to Samsung?
LOL!!!
bricked just because of TWLauncher......
I think that is not brick.....
Flash stock rom via Odin.
Sent from Miui powered SGS
or custom ROM more better and satisfying
azzledazzle said:
Flash stock rom via Odin.
Sent from Miui powered SGS
Click to expand...
Click to collapse
sry for my english
thx for your answer i have tried a few times to flash my sgs with odin but it didnt work . i have started my sgs into the downloding mode and then i start odin to flash and then it does nothing
did you use a guide for flashing through odin? is your phone drivers installed on your computer? what kind of error?
Alright buddy, I agree sounds like you need to reflash a new rom.
Check out this link. By no means am I ordering you to flash darky's rom (even though it is bloody brilliant) It's a good guide for using odin.
If you follow it down to part 2 of the guide then you will have a basically stock Gingerbread with a few tweaks to make it a better experience.
Be sure to read it carefully as some of it isn't necessarily for you.
http://www.darkyrom.com/community/i...g-rc6-need-to-flash-dark_core_2-2-first.2382/
All credits go to darky, ficeto and ceriko obviously for the rom & guide.
Good luck
It's only a BRICK if the device is completely unrecoverable. This isn't even a soft-brick... the launcher just crashed.
Flash a new rom with ODIN;
or Flash a Kernel with CWM recovery via ODIN, and then boot into recovery.
Odin will work; just make sure you've got the drivers installed.
@kilokilo1066
thx this was a good idea but now i have the problem that odin is standing on set Partition and that over one hour what should i do ?? cancel odin and tried again ?
Thanks for your help my sgs is working again the thread can be closed
You made it sound as if your phone was bricked! lol
I'd recommend you to install the Darky ROM 9.5.
I myself am a totally new Android and Galaxy S user. The first thing I did after unboxing my phone was to flash Darky's 9.5 on it. Its brilliant.
Here's the guide.
EDIT: Turns out I'm not allowed to post links. Well use google!
bigred85 said:
@kilokilo1066
thx this was a good idea but now i have the problem that odin is standing on set Partition and that over one hour what should i do ?? cancel odin and tried again ?
Click to expand...
Click to collapse
Glad your sgs is back up and running buddy
Like what everyone els is saying, a reflash is the way to go. Id recomend flashing with EZbase. they offer the best stocklike roms.
bigred85 said:
Thanks for your help my sgs is working again the thread can be closed
Click to expand...
Click to collapse
Read the god damn thread people. Problem solved. Let this thread die.

Bricked Galaxy TAB 8.9 (GT-7300) - $20 reward for working solution

Hi,
So, I got a Samsung Galaxy TAB 8.9 (GT-7300) WiFi+3G. Nordic/European version. I have a long history of rooting and running custom ROM's on my Android devices, but this time i f##ed up a bit.
1. Installed root_original.zip from this thread by copying it on to the tablet and applying it from stock recovery.
2. Booted and installed Superuser and ROM Manager from Market.
3. Used ROM Manager to install CWM for Galaxy Tab 10.1 (Yes, I know...).
4. Tab would not boot, but I could still get in to download mode. Browsed some XDA threads and came across this guy who seemed to have the same problem. I did not see that he had a P7310 (WiFi only) tablet. So, I used Odin 1.85 to install the bootloader, which was for the P7310, not for P-7300. Now, the tablet boots but the display is just flickering, like it is using a wrong refresh rate or wrong resolution. Not at all possible to read anything, but I can still get into Download mode.
5. Installed stock rom from here, specifically this one: P7300XWLA2------2012 January----P7300NEELA1-----Nordic countries----
Still no luck. The tablet boots into Android but the display is still flickering.
$20 for anyone who gets me out of this mess
Can you come in recovery ?
Than try this?
http://forum.xda-developers.com/showthread.php?t=1519564
There is an option in CWM under the mount and storage tab where stands mount usb connection click on that and move this to your tab after that install it
I hope it will work!
You could also try the Swedish firmware: http://hotfile.com/dl/146666862/13403b2/P7300XWKL4_P7300NSEKL1_NSE.zip.html
The NSE are usually pretty much the same as NEE with some swedish bloatware. Worth a try I guess.
Also see this guide for how to use Odin in case you did something wrong: http://forum.xda-developers.com/showthread.php?t=1406137
One thing that I've noticed when flashing with Odin is that even if I check the F.reset checkbox it still does not do a factory reset (at least it did not do it for me). You should be able to do a factory reset using the stock recovery.
Oh and btw, my advice is for free.
Hi safariking,
I can get in to recovery, but I'm unable to read anything, as the display is just flickering. I would need a press-by-press guide in order to perform the steps correctly... :/
Thanks kallt_kaffe, I'll try the swedish firmware and follow the guide step-by-step
kallt_kaffe said:
You could also try the Swedish firmware: http://hotfile.com/dl/146666862/13403b2/P7300XWKL4_P7300NSEKL1_NSE.zip.html
The NSE are usually pretty much the same as NEE with some swedish bloatware. Worth a try I guess.
Click to expand...
Click to collapse
Installs correctly but does not fix my display problem.
kallt_kaffe said:
Also see this guide for how to use Odin in case you did something wrong: http://forum.xda-developers.com/showthread.php?t=1406137
Click to expand...
Click to collapse
I followed the guide step-by-step. No errors occured during flashing.
kallt_kaffe said:
One thing that I've noticed when flashing with Odin is that even if I check the F.reset checkbox it still does not do a factory reset (at least it did not do it for me). You should be able to do a factory reset using the stock recovery.
Click to expand...
Click to collapse
I can't really verify the factory reset. I can get into stock recovery, but the display is still rubbish so I can't do a manual factory reset.
kallt_kaffe said:
Oh and btw, my advice is for free.
Click to expand...
Click to collapse
I voted for you guys in ESC so I guess we're even
I have attached a photo of the tab in stock recovery so you can see what's wrong. This happens no matter if I start normally, recovery or download mode.
snubbel said:
Installs correctly but does not fix my display problem.
I followed the guide step-by-step. No errors occured during flashing.
I can't really verify the factory reset. I can get into stock recovery, but the display is still rubbish so I can't do a manual factory reset.
I voted for you guys in ESC so I guess we're even
I have attached a photo of the tab in stock recovery so you can see what's wrong. This happens no matter if I start normally, recovery or download mode.
Click to expand...
Click to collapse
Wooow that looks not good man i think you must return it back to samsung
you can run a logcat maybe
snubbel said:
I have attached a photo of the tab in stock recovery so you can see what's wrong. This happens no matter if I start normally, recovery or download mode.
Click to expand...
Click to collapse
If you turn it off and charge it, is the charging-mode-display also distorted?
Also if I were you I would leave it on in download or recovery mode and let the battery drain completely. Worth a shot I guess.
Questions or Problems Should Not Be Posted in the Development Forum
Please Post in the Correct Forums & Read the Forum Rules
Moving to General
kallt_kaffe said:
If you turn it off and charge it, is the charging-mode-display also distorted?
Click to expand...
Click to collapse
If I turn it off it automatically turns back on and boots Android. So I can't see if the "charging while turned off" icon is also distorted.
kallt_kaffe said:
Also if I were you I would leave it on in download or recovery mode and let the battery drain completely. Worth a shot I guess.
Click to expand...
Click to collapse
I left it in download mode last night, it's still turned on. I'll let the battery drain and see what happens when I connect the charger.
When I flash a complete ROM with Odin (e.g. the Swedish ROM you suggested) - is there anything left to flash that could be causing this? If I were to return the tablet to the dealer, will there be any evidence of dumb-user-flashing?
snubbel said:
When I flash a complete ROM with Odin (e.g. the Swedish ROM you suggested) - is there anything left to flash that could be causing this? If I were to return the tablet to the dealer, will there be any evidence of dumb-user-flashing?
Click to expand...
Click to collapse
I honestly do not know.
Have you tried flashing the PIT file (in the PIT section) along with the ODIN image (in the PDA section)? You can download the PIT file so you can click on Repartition, right here. It's a very small file. Be sure you have F.Reset Time checkmarked too. Best of lucks.
If you flash a bootloader for P7310 so when you trying to flash P7300 ROM with odin, the bootloader will mapping all file just like P7310 with their partition Layout.. I think the pit file is not the solution..
First you need turn back the bootloader to original form.. I dont know where I can find P7300 bootloader..
After you finish with the bootloader, try to install P7300 Stock rom, with pit file and repartition..
I dont know if this post will help you.. but it worth to try..
EDIT:
maybe you can use firmware from P7300ZSKH5 from this link
This file include with bootloader and pit file..
Flash with Odin like image below
Sorry for my english..
nirogu325 said:
Have you tried flashing the PIT file (in the PIT section) along with the ODIN image (in the PDA section)? You can download the PIT file so you can click on Repartition, right here. It's a very small file. Be sure you have F.Reset Time checkmarked too. Best of lucks.
Click to expand...
Click to collapse
Re-partitioning with the PIT file along with the ROM did not help :/
suwandiapr said:
If you flash a bootloader for P7310 so when you trying to flash P7300 ROM with odin, the bootloader will mapping all file just like P7310 with their partition Layout.. I think the pit file is not the solution..
First you need turn back the bootloader to original form.. I dont know where I can find P7300 bootloader..
After you finish with the bootloader, try to install P7300 Stock rom, with pit file and repartition..
I dont know if this post will help you.. but it worth to try..
EDIT:
maybe you can use firmware from P7300ZSKH5 from this link
This file include with bootloader and pit file..
Flash with Odin like image below
Sorry for my english..
Click to expand...
Click to collapse
Thanks for your suggestion, but unfortunately: no luck.
Just to be sure this isn't a compatibility issue on my computer, I set up a clean install Win7. I'm using x64, could this be an issue?
snubbel said:
Thanks for your suggestion, but unfortunately: no luck.
Just to be sure this isn't a compatibility issue on my computer, I set up a clean install Win7. I'm using x64, could this be an issue?
Click to expand...
Click to collapse
As long as you have the right drivers installed, no. That's my setup.
I had a similar issue. It occured only when I turned display off and on, both in android and in battery charging mode while powered off. I just went back to the store and got it replaced. xD
Anyway the flickering began to show up after flashing 3.2 back from a 4.0 rom... So I think there was something wrong with the bootloader.. Didnt find any tar file containing the original bootloader.. Perhaps someone here can make it for you
hey,
i got same problem after i tried to install cm9. now i cant install nothing (i formated cash, data, system and preload) no data factory reset working. i have nonstop bootloops and format cache and dalvik not working but cwm ist starting but not working really. but can start download mode too ... so i think its not a super-brick for my gt 7300 from switzerland.
so, i will try to download from samMobile the original firmware and to flash with odin. anybody knows a tutorial with odin for gt 7300? cant find nothing for pit, csc, tar ...
please help me
thx sophie from switzerland
suwandiapr said:
If you flash a bootloader for P7310 so when you trying to flash P7300 ROM with odin, the bootloader will mapping all file just like P7310 with their partition Layout.. I think the pit file is not the solution..
First you need turn back the bootloader to original form.. I dont know where I can find P7300 bootloader..
After you finish with the bootloader, try to install P7300 Stock rom, with pit file and repartition..
I dont know if this post will help you.. but it worth to try..
EDIT:
maybe you can use firmware from P7300ZSKH5 from this link
This file include with bootloader and pit file..
Flash with Odin like image below
Sorry for my english..
Click to expand...
Click to collapse
I have to say, I was about to send the tablet to samsung, it was dead, no rom, no boot, no partition, no USB connection to store, what save me was the Odin up load that you recommended me, the tablet was really crashed.
I Think that is a sollution for actually almost any problem on the tablet (a complete format, sure, but still a good solution for ROM problems).
anyway, Many Thanks!!!!!!
Newbie try to help.
Have you try to install another CMW version using odin? Maybe it's caused by wrong CMW version. Try CMW v5.5.0.4 here http://forum.xda-developers.com/showthread.php?t=1312218

[Q] Bricked LPY without wiping?

Hey guys,
I hope you can help me. I am aware of the ICS Kernel Bricking bug, and the faulty chip with the faulty firmware, as described on the xda portal, and I read all the stickies. Nevertheless I want to ask you for your opinion on this matter, to prevent turning my note into a brick
So thats what happend last night:
I was on LPY for about 1 month (since released) with root, stock kernel. Before I was on GB DarkyRom 3.3. Everything went normal until I made 2 changes the last hours:
1. I modified the build.prop with this tutorial:
http://forum.xda-developers.com/showthread.php?t=1687156
2. I installed Super Video (like popup player on the galaxy s3) and had several freezes when I started to watch 2 videos. So I took out the battery like 4 times.
Phone booted normally. So I locked the screen, and went to a party.
Then I realized that within 2 Hours the battery got from 50% to 15%. I was too busy to look at betterbatterystats, so I just rebooted the phone with the stock Power Menu.
Now my phone won't boot anymore. It stucks on "Samsung Galaxy Note N-7000" Screen.
As I said, I have not wiped, or do anything with cwm or 3e recovery. However, I can get into DL mode and 3e recovery.
What can I do now? Flash LPF? Reflash LPY?
I read somewhere by someone, that it could be, that even without wiping, the phone can get brick at anytime... Did that happend to me?
I haven't tried to flash anything else, because I wanted to share this with you and get your opinion.
Thanks in advance
k!DDa
So now donot try anything.I suppose you were in darkyrom 3.3 re.If so,you should have known about the counter.So flash it and you will be fine.I again say it will increase counter if you use 3.3 re.
If you don't want the counter,flash a stock gb rom/stock-rooted gb rom.I prefer 3.3 re because it is a wipe rom
Hi vijai2011,
thanks for your answer but I was on darkyrom BEFORE I switched to LPY (that was just a side note^^)
> the last month, including today, I am on LPY, which isn't booting anymore.
k!DDa said:
Hi vijai2011,
thanks for your answer but I was on darkyrom BEFORE I switched to LPY (that was just a side note^^)
> the last month, including today, I am on LPY, which isn't booting anymore.
Click to expand...
Click to collapse
thats not a problem.you can try.
wow you're fast^^
okay but isn't it possible to revive my note? e.g. just flashing a non wipe ICS version via PC ODIN (I do not care about the counter or triangle)
like criskelos ICS No wipe http://forum.xda-developers.com/showthread.php?t=1609252
the inability to boot you describe sounds like something a corrupted build.prop might cause so it's probably nothing to worry about. you'll need to restore your build.prop somehow, probably by flashing something in Odin
ok thanks, I will try. but one good and one bad thing:
I saved the original build.prop before
But on the internal SD card and not my external ^^
If you want to be absolute sure Flash a stock ICS (a full wipe version) rom from pc odin. If all goes well there is no brickissue for you. Then you root using Dr Ketans method.
Sent from my GT-N7000 using xda premium
k!DDa said:
wow you're fast^^
okay but isn't it possible to revive my note? e.g. just flashing a non wipe ICS version via PC ODIN (I do not care about the counter or triangle)
like criskelos ICS No wipe http://forum.xda-developers.com/showthread.php?t=1609252
Click to expand...
Click to collapse
No problem.As I said already its better to go for a wipe rom because of the repartition thing...
one last qustion,
I decided to reflash LPY. But it has only an tar.md5 file. I cannot use MobileOdin. Can I just put it in PDA at PC Odin? (Rename it before to .tar?)
The last 20 firmwares I flashed hadn't that extension.
k!DDa said:
one last qustion,
I decided to reflash LPY. But it has only an tar.md5 file. I cannot use MobileOdin. Can I just put it in PDA at PC Odin? (Rename it before to .tar?)
The last 20 firmwares I flashed hadn't that extension.
Click to expand...
Click to collapse
yes that will work fine, but don't rename it. it works as .tar.md5
yes put the md5 in the pda section and flash with pc odin as normal
Thanks guys my phone is booting again

[SOLVED] [Q] Galaxy Note won't flash original firmware

Hello guys!
My friend gave his Galaxy Note for me to get a brick fix. He said that he flashed the German ICS STOCK ROM and wiped using CWM. He said that he entered in a bootloop. Then he tried to flash using ODIN, but it stopped at factoryfs, as known at the eMMC bug. In the bug, he disconnected the USB cable and he is seeing a message which says to connect to Kies and select recovery. But he said that didn't worked and Kies didn't recognized the phone. Even with ODIN, loaded with PIT and PDA, the phone wasn't able to receive factoryfs, the same file from the 1st error. I followed a lot of tutorials here on XDA and used the search to find a similar thread. He needs help, since recovery mode, charging mode and normal mode are blocked by the message. I need a ROM which contains the PDA, the CSC and the MODEM files. I already have the PIT, so I need those 3 files to try again.
--PHONE DETAILS--
Samsung Galaxy Note N7000
16GB Storage
LAST Firmware completelly flashed: XXLRQ (I think that is the firmware which you can't wipe)
ICS Stock
Thanks!
EDIT: I tried with another GB firmware and with an ICS firmware. Still NOT WORKING.
EDIT #2: The phone still have Download mode open!
BIGGEST EDIT:
All of the methods in this thread are NOT WORKING. Still stops at factoryfs and CWM says "Installation Aborted". SO, WHAT I CAN DO? He is desperated, I'm desperated. PLEASE ANSWER FAST !!
Mr.Indigo said:
Hello guys!
My friend gave his Galaxy Note for me to get a brick fix. He said that he flashed the German ICS STOCK ROM and wiped using CWM. He said that he entered in a bootloop. Then he tried to flash using ODIN, but it stopped at factoryfs, as known at the eMMC bug. In the bug, he disconnected the USB cable and he is seeing a message which says to connect to Kies and select recovery. But he said that didn't worked and Kies didn't recognized the phone. Even with ODIN, loaded with PIT and PDA, the phone wasn't able to receive factoryfs, the same file from the 1st error. I followed a lot of tutorials here on XDA and used the search to find a similar thread. He needs help, since recovery mode, charging mode and normal mode are blocked by the message. I need a ROM which contains the PDA, the CSC and the MODEM files. I already have the PIT, so I need those 3 files to try again.
--PHONE DETAILS--
Samsung Galaxy Note N7000
16GB Storage
LAST Firmware completelly flashed: XXLRQ (I think that is the firmware which you can't wipe)
ICS Stock
Thanks!
EDIT: I tried with another GB firmware and with an ICS firmware. Still NOT WORKING.
Click to expand...
Click to collapse
He did successfully bricked his devices.. If you are not able to enter into download mode you have a paperweight in your hands... If he has warranty try to get it replaced.. If he doesn't then try the pit file method on the general forum..
You don't need any 3 files.. It's the same or at least the effect its the same with 1 or 3 files
Tapatalking on my n7000
msedek said:
He did successfully bricked his devices.. If you are not able to enter into download mode you have a paperweight in your hands... If he has warranty try to get it replaced.. If he doesn't then try the pit file method on the general forum..
You don't need any 3 files.. It's the same or at least the effect its the same with 1 or 3 files
Tapatalking on my n7000
Click to expand...
Click to collapse
He is able to enter into DL mode. Even PIT doesn't work.
Mr.Indigo said:
He is able to enter into DL mode. Even PIT doesn't work.
Click to expand...
Click to collapse
Well then your only option its the warranty or pay samsung either for a new phone or a mother board replacement...
That pit file method its only a partial solution to help you get your device partially working maybe a couple of months.. When the emmc bug happens it does damage the Emmc chip so the hardware its fried and there's no software that can repair it..
The pit method could work for someone but not for others.. Depends on the damage
Tapatalking on my n7000
Here I think you may find a solution for your problem.
If you think you need to flash the 3 files with odin try flashing an old GB ROM, you can find it here, some (NOT ALL) of the ROM in this post has PDA, CSC and PHONE part.
Good luck!
andreaonelove said:
Here I think you may find a solution for your problem.
If you think you need to flash the 3 files with odin try flashing an old GB ROM, you can find it here, some (NOT ALL) of the ROM in this post has PDA, CSC and PHONE part.
Good luck!
Click to expand...
Click to collapse
I tried it, but didn't work. This solution is too much dangerous?
andreaonelove said:
Here I think you may find a solution for your problem.
If you think you need to flash the 3 files with odin try flashing an old GB ROM, you can find it here, some (NOT ALL) of the ROM in this post has PDA, CSC and PHONE part.
Good luck!
Click to expand...
Click to collapse
It's doesn't matter if it's 1 or 3 files.. The pit file just repartition the emmc in order to reacomodate the memory and so you can flash the rom.. Flashing separately phone csc and PDA won't make any difference..
Tapatalking on my n7000
Have you tryed to flash a GB ROM with three files?
And the solution proposed here?
andreaonelove said:
Have you tryed to flash a GB ROM with three files?
And the solution proposed here?
Click to expand...
Click to collapse
Mr.Indigo said:
Hello guys!
My friend gave his Galaxy Note for me to get a brick fix. He said that he flashed the German ICS STOCK ROM and wiped using CWM. He said that he entered in a bootloop. Then he tried to flash using ODIN, but it stopped at factoryfs, as known at the eMMC bug. In the bug, he disconnected the USB cable and he is seeing a message which says to connect to Kies and select recovery. But he said that didn't worked and Kies didn't recognized the phone. Even with ODIN, loaded with PIT and PDA, the phone wasn't able to receive factoryfs, the same file from the 1st error. I followed a lot of tutorials here on XDA and used the search to find a similar thread. He needs help, since recovery mode, charging mode and normal mode are blocked by the message. I need a ROM which contains the PDA, the CSC and the MODEM files. I already have the PIT, so I need those 3 files to try again.
--PHONE DETAILS--
Samsung Galaxy Note N7000
16GB Storage
LAST Firmware completelly flashed: XXLRQ (I think that is the firmware which you can't wipe)
ICS Stock
Thanks!
EDIT: I tried with another GB firmware and with an ICS firmware. Still NOT WORKING.
EDIT #2: The phone still have Download mode open!
Click to expand...
Click to collapse
I have the same problem!!!
I'm desperated, since it's my main phone!
I will try the last solutions!!!
andreaonelove said:
Have you tryed to flash a GB ROM with three files?
And the solution proposed here?
Click to expand...
Click to collapse
That's what I need.... I didn't found the 3 files. I will try!
andreaonelove said:
Have you tryed to flash a GB ROM with three files?
And the solution proposed here?
Click to expand...
Click to collapse
This solution is based on a GB kernel. I'm in the same situation as Mr.Indigo, with the same ROM and the same problems. I need to use CM9 kernel to use with ICS, right? Or I can use GB kernel?
Aldenucci said:
This solution is based on a GB kernel. I'm in the same situation as Mr.Indigo, with the same ROM and the same problems. I need to use CM9 kernel to use with ICS, right? Or I can use GB kernel?
Click to expand...
Click to collapse
IDK, you must do it at your own risk.
andreaonelove said:
Here I think you may find a solution for your problem.
If you think you need to flash the 3 files with odin try flashing an old GB ROM, you can find it here, some (NOT ALL) of the ROM in this post has PDA, CSC and PHONE part.
Good luck!
Click to expand...
Click to collapse
I tried this solution. The cellphone starts to make strange noises and a lot of characters entered in ADB command. Any other solution??
Mr.Indigo said:
I tried this solution. The cellphone starts to make strange noises and a lot of characters entered in ADB command. Any other solution??
Click to expand...
Click to collapse
Yeah already told you.. Walk to the nearest samsung center and claim the warranty or pay for a replacement
Tapatalking on my n7000
unfortunately sound like a brick to me. failed flashing via pc odin and stuck at factoryfs has something to do with your root. so i heard.. the best way is to send it to SSC for repair while you still have the warranty
msedek said:
Yeah already told you.. Walk to the nearest samsung center and claim the warranty or pay for a replacement
Tapatalking on my n7000
Click to expand...
Click to collapse
He didn't have warranty. I'm trying to flash any PIT which owns factoryfs. He said that fails to wipe into some minutes and I have 88 factoryfs PITs. So I have to flash ALL of them to know. BTW I can flash a kernel using ODIN!
mistajoe83 said:
unfortunately sound like a brick to me. failed flashing via pc odin and stuck at factoryfs has something to do with your root. so i heard.. the best way is to send it to SSC for repair while you still have the warranty
Click to expand...
Click to collapse
My problem is SOLVED!
I found 88 PITs, whick it was intended for factoryfs. I tried the first ten PITs, and the 7th WORKED!
It was 17xx MB. Now the phone is working! THANKS FOR ALL OF YOUR GUYS HELP!

Rooting failure

Please help,
I was trying to root my Samsung galaxy note gt-i9220, I followed the video instructions from rootgalaxynote.com, I used the CWM.Zip, CWM-supers-v0.87.zip and after I installed the franco kernel-r5.zip
PROBLEM: after installing the franco kernel when I restarted the system my note comes on and shows Galaxy Note GT-I9220 and after that I have a black screen.
What can I do to get back the original state, it seems I can not handle rooting it. However it can get to the download mode when I place the volume up+power+home burton.
NB: I did not use a computer while doing this neither did I backup any thing
What rom where you on before installing the new kernel?
tudeine said:
Please help,
I was trying to root my Samsung galaxy note gt-i9220, I followed the video instructions from rootgalaxynote.com, I used the CWM.Zip, CWM-supers-v0.87.zip and after I installed the franco kernel-r5.zip
PROBLEM: after installing the franco kernel when I restarted the system my note comes on and shows Galaxy Note GT-I9220 and after that I have a black screen.
What can I do to get back the original state, it seems I can not handle rooting it. However it can get to the download mode when I place the volume up+power+home burton.
NB: I did not use a computer while doing this neither did I backup any thing
Click to expand...
Click to collapse
Hello.
ROM type
nokiamodeln91 said:
What rom where you on before installing the new kernel?
Click to expand...
Click to collapse
Am sorry to say but I have no idea which rom I was using, this was my first time rooting, a friend of mine bought me this phone on a visit to china, and so I believe it was the custom rom.
And I remember it was running version 4.1.2 of the Operating system, am sorry am making it difficult to get help, but a gud learning lesson, please help.
tudeine said:
Am sorry to say but I have no idea which rom I was using, this was my first time rooting, a friend of mine bought me this phone on a visit to china, and so I believe it was the custom rom.
And I remember it was running version 4.1.2 of the Operating system, am sorry am making it difficult to get help, but a gud learning lesson, please help.
Click to expand...
Click to collapse
As far as i remember there is no franco kernel for jb 4.1.2. That's why your phone cannot boot.
The worst is flash back a stock rom unless you remember your firmware version then you can flash philz kernel
Philz kernel/stock rom
Rosli59564 said:
As far as i remember there is no franco kernel for jb 4.1.2. That's why your phone cannot boot.
The worst is flash back a stock rom unless you remember your firmware version then you can flash philz kernel
Click to expand...
Click to collapse
Ok, thanks for the help so far, I have been reading different threads about the stock rom and philz kernel,
I could not identify my stock rom, am wondering could you be knowing stock rom for the gt-i9220 if yes, please pass me the link where I can download it.
I wanted to try out that n if it does not help I can go for philz kernel.
tudeine said:
Ok, thanks for the help so far, I have been reading different threads about the stock rom and philz kernel,
I could not identify my stock rom, am wondering could you be knowing stock rom for the gt-i9220 if yes, please pass me the link where I can download it.
I wanted to try out that n if it does not help I can go for philz kernel.
Click to expand...
Click to collapse
try flashing any of the JB version of Philz kernel like DDLSC using recovery of franco kernel. You should be able to get into CWM recovery,
power failure
nokiamodeln91 said:
try flashing any of the JB version of Philz kernel like DDLSC using recovery of franco kernel. You should be able to get into CWM recovery,
Click to expand...
Click to collapse
I guess ma problems are too many, after downloading philz kernel and transferring it to an external memory card, I cannot get into the recovery mode which I were able to get to 2 days back.
I did not do anything else from the day I was trying to root and things back fired, I thought the battery had been used up but even after charging I get nothing apart from the phone being warm, when I insert the charger all I see is a battery with a circle that flashes and disappears, flashes and disappears.
Any ideas or this marks the end of this gadget
Download mode? If yes then you can flash a rom using Odin or flash Philz kernel also using Odin.. If no.., you may need to try a charged battery.
Black screen
nokiamodeln91 said:
Download mode? If yes then you can flash a rom using Odin or flash Philz kernel also using Odin.. If no.., you may need to try a charged battery.
Click to expand...
Click to collapse
I guess I have to look for a charged battery, odin cannot read the phone, however I would like to know when I unzip philz kernel folder, there are other files and I understand odin(never used it before) has options like partition,auto reboot, F.time, Boot loader,PDA, phone, csc
I need to know which ones should I select, and if am using PDA which file from extracted philz kernel do I select.
tudeine said:
I guess I have to look for a charged battery, odin cannot read the phone, however I would like to know when I unzip philz kernel folder, there are other files and I understand odin(never used it before) has options like partition,auto reboot, F.time, Boot loader,PDA, phone, csc
I need to know which ones should I select, and if am using PDA which file from extracted philz kernel do I select.
Click to expand...
Click to collapse
For flashing Philz kernel using odin you need to use .tar file instead of .zip file. Also no need to extract anything from .tar file. Leave everything in odin as it is and put the .tar file in PDA section, if at all odin can detect your phone. remember, this needs to be performed in download mode.
I made it
treacherous_hawk said:
For flashing Philz kernel using odin you need to use .tar file instead of .zip file. Also no need to extract anything from .tar file. Leave everything in odin as it is and put the .tar file in PDA section, if at all odin can detect your phone. remember, this needs to be performed in download mode.
Click to expand...
Click to collapse
Thanx so much man, thanks a bunch, I can say the phone is up and running, however, everything is in Chinese, I do not Chinese, I cannot tell what the words mean, but all I know the philz kernel procedure using odin has worked.
now I need help to change the language, did I download the wrong kernel,
this is what I used: PhilZ-cwm6-DDLSC-ODD-4.93.6.tar,md5
Another problem I have observed, when you switch on the device it brings a yellow triangle with an exclamation mark in the middle
tudeine said:
Thanx so much man, thanks a bunch, I can say the phone is up and running, however, everything is in Chinese, I do not Chinese, I cannot tell what the words mean, but all I know the philz kernel procedure using odin has worked.
now I need help to change the language, did I download the wrong kernel,
this is what I used: PhilZ-cwm6-DDLSC-ODD-4.93.6.tar,md5
Another problem I have observed, when you switch on the device it brings a yellow triangle with an exclamation mark in the middle
Click to expand...
Click to collapse
Do you mean everything is in chinese in recovery or it boots up to home screen and there everything is chinese? You can leave the yellow triangle alone, first get it working once it does you can use triangle away app from xda or play store to remove it.
Sent from my GT-N7000 using Tapatalk
working
treacherous_hawk said:
Do you mean everything is in chinese in recovery or it boots up to home screen and there everything is chinese? You can leave the yellow triangle alone, first get it working once it does you can use triangle away app from xda or play store to remove it.
Sent from my GT-N7000 using Tapatalk[/QUOTE
What I meant, the phone boots up to home screen but everything was in Chinese, however, I managed to change the language to English, now the phone is working I can receive and make calls,browse, I have the supersu icon (I do not know what it does) on my home screen and some icons are in Chinese, I still don't have play store, and I still have the yellow triangle.
Below are my phone details now:
model nmbr: GT-N7000
android version:4.1.2
baseband: I92220ZCLSG
KERNAL VERSION: 3.0.31-906407
BUILD NUMBER: JZO54K.I9220ZCLSG
DO I HAVE TO CHANGE, OR THIS IS OK
Thanx so much mean while atleast its now up and running
Click to expand...
Click to collapse
I think the Chinese version didn't have playstore and all. You may need to flash a rom of n7000 to get all the access..

Categories

Resources