Database Develop

Ginger Bread step by step

Can some one help me? I have the original LG Revolution, got it the week after it first came out. I have Revolt 1.5 on it. I need to know how to get it from that point to GB, in "spoon feed me" talk. I know I need to unroot, I rooted with the superoneclick, can I unroot with thecube's Revotoolkit? What do I need to do? Please and thank you. Also, I don't have any of the original goodies, so I will need to rely on other forum posts to get me all that crap too. Also, if I go to the GB and want to root, will I have to use the ADB method?

I Spent about 18 ************* hours on this. The good news is, if my stupid ass can do it, ANYBODY can lol. The thread about losing root, and accidentally upgrading to v6 has all the info needed, I promise. And it should only take about an hour or so.
http://forum.xda-developers.com/showthread.php?t=1211295
Sent from my VS910 4G using xda premium

you have to install the LGNST 1st if you don't have it
here's the link to all the files you need to install LGNST just follow it step by step
http://forum.xda-developers.com/showthread.php?t=1211295
i don't think you need to download the vz4 tot file anymore since there's a root for the vz6 already
so you'll just need to run LGNST and load the vz6 tot to your revo, you don't need to unroot or uninstall cwm since once you loaded the vz6 it'll remove both at the same time. this process takes about 15mins
i recommend not to disconnect the phone until your revo have complete rebooted and the LGNST says complete
then all you have to do is update to vz7 GB on the revo software update
here's the link to get the vz7 GB rooted just follow the instructions and you'll be fine and this root can help root the vz6 also
http://androidnerds.net/2011/10/08/lg-esteem-oneclickroot-now-ready/
if the LG esteem don't work use the drivers provided on the link. rooting vz7 GB takes 1-3min

Those ways work my way worked as well. I just restored to the stock Revo from this post:
http://forum.xda-developers.com/showthread.php?t=1129117
I then wiped /data in cwm. I tried to boot into that restore without doing it and I black screened. That restore doesn't have the /data stuff so something funky happens and booting didn't work for me. I wiped /data and everything was ok. After I booted up I installed Revo Toolkit from >>> http://forum.xda-developers.com/showthread.php?t=1144951
Once I had that installed I went and changed back to the stock recovery.
With the stock recovery in place I then went into setting and pulled the V6 update to my phone. That came through fine for me (this is where a lot of people had problems). After that rebooted and installed I pulled the GB update to my phone the same way. That installed fine and rebooted. Only issue I am having now is getting my phone to root again so I can test out MT's new ROM for him which is what started this whole mess when I tried to flash to it from Revolt.
Hope my ranting helps

bhp117 said:
you have to install the LGNST 1st if you don't have it
here's the link to all the files you need to install LGNST just follow it step by step
http://forum.xda-developers.com/showthread.php?t=1211295
i don't think you need to download the vz4 tot file anymore since there's a root for the vz6 already
so you'll just need to run LGNST and load the vz6 tot to your revo, you don't need to unroot or uninstall cwm since once you loaded the vz6 it'll remove both at the same time. this process takes about 15mins
i recommend not to disconnect the phone until your revo have complete rebooted and the LGNST says complete
then all you have to do is update to vz7 GB on the revo software update
here's the link to get the vz7 GB rooted just follow the instructions and you'll be fine and this root can help root the vz6 also
http://androidnerds.net/2011/10/08/lg-esteem-oneclickroot-now-ready/
if the LG esteem don't work use the drivers provided on the link. rooting vz7 GB takes 1-3min
Click to expand...
Click to collapse
Where's the vz6.tot?

wheelern said:
Where's the vz6.tot?
Click to expand...
Click to collapse
its in the 1st link step 3 link at the top post vs910vz6_05.s6_05.p58008.r5.tot
here's the direct link to it
http://forum.xda-developers.com/showthread.php?t=1120062

I cannot pull the v7 update from v6 tot or pull the v6 update from the v4 tot. Any ideas?
Sent from my VS910 4G using Tapatalk

Having the same issue. what part of the country are you in? and did you use the fastboot your phone the first time you tried to add cwm?

patsoxfan said:
Having the same issue. what part of the country are you in? and did you use the fastboot your phone the first time you tried to add cwm?
Click to expand...
Click to collapse
I did the first week I had my phone...Is this going to have a negative effect on trying to get v6/v7 updates?

I'm having the same issue. I'm on v4 and I'm not getting v6.

[Q] need help re-rooting the lg revolution!!!!

As simple as possible, here's my situation: Two days ago I rooted my LG Revolution, which was running 2.3.4 before I rooted it. Everything went well!!!
Few hours later, i was tethering, then as I came back to my phone I saw it had restarted and that Verizon had sent out an OTA update (which I selected CANCEL to, btw). My phone restarted again and I lost root, plus my phone went to 2.3.6.
I tried to reroot again on 2.3.6, but the oneclickroot batch file didn't root it this time (permissions were denied when trying to push files and use the chmod 777 command). I later tried the manual process, but still not luck.
PLEASE, SOMEONE HELP!!! I WANT ROOT ACCESS TO TETHER (WIRELESS) FOR MY NEW IPAD.

This is being discussed all over the Development forum and this one. This newest update has not bee rooted yet.
Short answer you can't re-root yet.

Wow, do you know if I can backup to 2.3.4

Download the .TOTS. Just go back to v7 gingerbread and reroot. Put cwm on even if you don't need it. It will prevent your phone from updating because it's not the stock bootloader.
Sent from my Transformer Prime TF201 using xda premium

Haro912 said:
Download the .TOTS. Just go back to v7 gingerbread and reroot. Put cwm on even if you don't need it. It will prevent your phone from updating because it's not the stock bootloader.
Sent from my Transformer Prime TF201 using xda premium
Click to expand...
Click to collapse
Could you, please, post the instructions (step by step) on this: how to revert back to the previous version, flash CW, and how to root again? Will this work on the LG Revolution, and does this disrupt my 4G, which is something i read about in another forum?

wncoulte said:
Could you, please, post the instructions (step by step) on this: how to revert back to the previous version, flash CW, and how to root again? Will this work on the LG Revolution, and does this disrupt my 4G, which is something i read about in another forum?
Click to expand...
Click to collapse
1) Go back to V7, follow instructions in this thread
http://forum.xda-developers.com/showthread.php?t=1337386
2) Re-root and install CWM Recovery (choose Option 3)
http://forum.xda-developers.com/showthread.php?t=1348557
3) Flash GingerVolt 2.0
http://forum.xda-developers.com/showthread.php?t=1326542
Good luck!

dbeauch said:
1) Go back to V7, follow instructions in this thread
http://forum.xda-developers.com/showthread.php?t=1337386
2) Re-root and install CWM Recovery (choose Option 3)
http://forum.xda-developers.com/showthread.php?t=1348557
3) Flash GingerVolt 2.0
http://forum.xda-developers.com/showthread.php?t=1326542
Good luck!
Click to expand...
Click to collapse
This crap FREAKIN' SUCKS!!!! I CAN'T GET ANYTHING TO FREAKIN' WORK!!!!! This is stupid!!! I can't go back to 2.3.4 because I can't get the components msi file to install, nor could i get the VS910.dll file to install either. Even did research on the situation and found that people using 65 bit OS were having problems, so i used my windows 32 bit OS computer and STILL GOT THE SAME BULLCRAP!!!!! THIS IS FRUSTRATING

dbeauch said:
1) Go back to V7, follow instructions in this thread
http://forum.xda-developers.com/showthread.php?t=1337386
2) Re-root and install CWM Recovery (choose Option 3)
http://forum.xda-developers.com/showthread.php?t=1348557
3) Flash GingerVolt 2.0
http://forum.xda-developers.com/showthread.php?t=1326542
Good luck!
Click to expand...
Click to collapse
THIS IS BULLCRAP!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
CAN'T MOVE BACK TO 2.3.4 BECAUSE I CAN'T GET A DANG THING TO WORK. First, the components msi file wouldn't install because of some error code, plus i could never get VS810.dll to register. Even did research online, and found that people running 64 bit os were having trouble, so i used my 32 bit os computer BUT STILL DIDN'T WORK ... BEYOND USING A 32 BIT OS, I FOUND NO SOLUTION ON THE ENTIRE WORLD WIDE WEB TO GET THIS TO WORK!!!!!!!

wncoulte said:
THIS IS BULLCRAP!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
CAN'T MOVE BACK TO 2.3.4 BECAUSE I CAN'T GET A DANG THING TO WORK. First, the components msi file wouldn't install because of some error code, plus i could never get VS810.dll to register. Even did research online, and found that people running 64 bit os were having trouble, so i used my 32 bit os computer BUT STILL DIDN'T WORK ... BEYOND USING A 32 BIT OS, I FOUND NO SOLUTION ON THE ENTIRE WORLD WIDE WEB TO GET THIS TO WORK!!!!!!!
Click to expand...
Click to collapse
i was able to keep root on my ota 8
i just used lg1click to reinstall stock recovery ran the update and used Super1click to push the Su/superuser.apk and everything works fine. Dont know why so many people are having issues with this
for you to update and keep root. start here
install stock rooted v7 http://forum.xda-developers.com/showthread.php?t=1348637
make sure your in usb debuging mode and plug into computer (win7 64 bit is ok) then select internet connection mode
Run lg1click/install drivers and option 5 http://forum.xda-developers.com/showthread.php?t=1348557
reboot and go to settings/aboutphone/softwareupdate/checknow and update phone
When finished rebooting run super 1 click and click root http://shortfuse.org/?page_id=2
when finished with that open Titanium backup or install trial from market when opened it prompts to fix SU access just tell it ok and reboot

cbrebel said:
i was able to keep root on my ota 8
i just used lg1click to reinstall stock recovery ran the update and used Super1click to push the Su/superuser.apk and everything works fine. Dont know why so many people are having issues with this
for you to update and keep root. start here
install stock rooted v7 http://forum.xda-developers.com/showthread.php?t=1348637
make sure your in usb debuging mode and plug into computer (win7 64 bit is ok) then select internet connection mode
Run lg1click/install drivers and option 5 http://forum.xda-developers.com/showthread.php?t=1348557
reboot and go to settings/aboutphone/softwareupdate/checknow and update phone
When finished rebooting run super 1 click and click root http://shortfuse.org/?page_id=2
when finished with that open Titanium backup or install trial from market when opened it prompts to fix SU access just tell it ok and reboot
Click to expand...
Click to collapse
Thanks, finally got it to work. I did a serious, hardcore internet search and found that i needed to turn down my user account settings, which was preventing my 64 bit machine from installing any harmful software. Wow, that was crazy. Anyway, i'm looking for some cool roms and themes to go with my rooted and CW LG Rev, now.
Any suggestions?

MT just released a one click root method for ZV8 so the process should be very easy going forward. it does require being on ZV7 though....if you have already upgraded to unrooted ZV8 you have to downgrade back to ZV7 to get root.
http://forum.xda-developers.com/showthread.php?t=1566729
Currently there are no ROMs (or themes I believe) for ZV8...MT should have a GV update ready pretty soon though!
So right now if you want to use a custom ROM you have to downgrade back to rooted ZV7.

dbeauch said:
MT just released a one click root method for ZV8 so the process should be very easy going forward. it does require being on ZV7 though....if you have already upgraded to unrooted ZV8 you have to downgrade back to ZV7 to get root.
http://forum.xda-developers.com/showthread.php?t=1566729
Currently there are no ROMs (or themes I believe) for ZV8...MT should have a GV update ready pretty soon though!
So right now if you want to use a custom ROM you have to downgrade back to rooted ZV7.
Click to expand...
Click to collapse
I'm actually running ZV7. I had to donwgrade from 2.3.6 (due to an OTA), so now i'm running 2.3.4 again (which, i believe, is ZV7, correct?). I'm looking for something really cool, and sleek, like this: http://forum.xda-developers.com/showthread.php?t=990233&page=1083

to make matters worse....
Don't want to be the bearer of bad news here but I in fact have cwm and gingervoltrom 2.0. whiel the update did not succeed it has been causing my phone to go freaking haywire. I'm not sure why our what's up. I can't even prove that's it's not a issue with 2.0 since that I also recently updated to. I used can that I had way before the Verizon update to install this though.

Complete LGNPST Package and tot files
Currently there is no direct way to regain root in ZV8, however in this post ( http://forum.xda-developers.com/showthread.php?t=1566729 ), the excellent mtmichaelson shows us a way into a kind of workaround for those who MUST regain root under ZV8. It involves flashing back to ZV7 first and sometimes finding all of the necessary files to do the flashing can be a chore. That's why I put them all together in one file for anyone who wants to download and try mtmichaelson's workaround. I AM NOT responsible for anyone bricking their Revo, so use this at your own risk. Here is the torrent file :
http://thepiratebay.se/torrent/7142194

Troubleshooting ZV8 update and rooting

Many non Noobies seem to be running across the same problems with rooting ZV8 updates. The answers are spread across three different threads so it seemed worth putting them all in one place up front.
First, big thanks MT for putting all this up so quickly.
If you are still on ZV7, first try
http://forum.xda-developers.com/showthread.php?t=1566729
However, I and many others have not been able to get an over the air update (step 6) to succeed and/or get a lot of permission denied errors in the All in One batch processes. If you can't get an OTA update to succeed first try
Originally Posted by drt054
use a terminal emulator, type in
su <enter>
echo 'ro.kernel.qemu=1' > /data/local.prop <enter>.
OR
Use root explorer to create /data/local.prop and type ro.kernel.qemu=1 then save it.
If the OTA update works, you're good, continue with MT's instructions, but SKIP OPTION 1 "Prepare for Update"
If, like me and many others you still can't get an OTA update to succeed Alternative 2 is the LGPST method here
http://forum.xda-developers.com/showthread.php?t=1466655
Again, the key is to not loose Clockwork Recovery. As long as you have done the create local.prop step and not done the All in One Option 1 "Prepare for Update" The LGPST ZV8 push will not erase Clockwork Recovery. Then you have ZV8 with Clockwork Recovery and you can get MT"s Broken Out v 1.1 here
http://forum.xda-developers.com/showthread.php?t=1577423
Or get back to a nandroid backup or rooted ZV7 to start over
http://forum.xda-developers.com/showthread.php?t=1348637
If you loose Clockwork Recovery or otherwise run into trouble, the sure fire way to get back on track is to go back to ZV7 and start over. Personally, reading through all the forums and despite several attempts, I was never able to get an All in One batch process to root ZV8, always permissions denied. But I was just trying to ZV8 with Clockwork Recovery to get to Broken Out anyway.
UPDATE 4/3/12
Another option for regaining CWM if you use LGPST
http://forum.xda-developers.com/showpost.php?p=24411050&postcount=83
MT is looking for ZV7 testers for an easy update
http://forum.xda-developers.com/showpost.php?p=24416908&postcount=86
I'm more than a Noob, but far from an expert, so if this contains errors or doesn't deserve it's own thread, feel free to suggest removal!

Cutterstark said:
If, like me and many others you still can't get an OTA update to succeed Alternative 2 is the LGPST method here
http://forum.xda-developers.com/showthread.php?t=1466655
Again, the key is to not loose Clockwork Recovery. As long as you have done the create local.prop step and not done the All in One Option 1 "Prepare for Update" The LGPST ZV8 push will not erase Clockwork Recovery. Then you have ZV8 with Clockwork Recovery and you can get MT"s Broken Out v 1.1 here
http://forum.xda-developers.com/showthread.php?t=1577423
Click to expand...
Click to collapse
Appears that you DO lose CWM with LGNPST. I just tried your method and I no longer had CWM. Maybe you missed a step in the OP? Otherwise, I lost CWM when I pushed ZV8 TOT. Also, just so you know, I did check/test CWM just prior to pushing and it worked just fine.
-Cybie
EDIT: I wanted to clarify and emphasize "Appears" in my reply above. Your method may work perfectly fine, but I had nothing but troubles getting things to work...

is this a bad place to ask how im supposed to go back to zv7? i dont have cwm anymore....
help me out

ejammer said:
is this a bad place to ask how im supposed to go back to zv7? i dont have cwm anymore....
help me out
Click to expand...
Click to collapse
See this Link... All the tools and instructions.
http://forum.xda-developers.com/showthread.php?t=1337386
Be sure to follow the part with which LGNPST Tool Part to install first!!!
-Cybie

yes am back to zv7 now trying to figure out how to do the all in one update steps from mt. it seems in the "prepare for update" steps it fails on copying local.prop or whatev its called.

ejammer said:
yes am back to zv7 now trying to figure out how to do the all in one update steps from mt. it seems in the "prepare for update" steps it fails on copying local.prop or whatev its called.
Click to expand...
Click to collapse
That is the same problem I had. Try the copy local.prop option described above and bypassing the prepare for update.
better yet, contact MT, he is working on an easy solution and needs ZV7 testers
http://forum.xda-developers.com/showpost.php?p=24416908&postcount=86

what if I am on zv6 still?
Son's Revo asked bout v8 OTA today. Didn't want to do it as I figured it would lose root. Currently we are on v6 and rooted (via AIO). Never went to v7, and now with v8 am trying to figure out how to get to v8 and keep root.
Do I need to get to v7 first prior to trying to get to v8 while keeping root or is there a way to go directly to v8 while maintaining root?
I posted in http://forum.xda-developers.com/showthread.php?p=25188375#post25188375 about trying to get to stock v7 not working for some reason so won't go into that here, but thought I would ask about a way to get to v8 with root WITHOUT having to go to v7 first.
I have a solid nandroid (which I just had to use to get a working phone again) I can use so don't mind testing things.
Thanks for any ideas...
***EDIT***
I went ahead and went to stock v7, rooted, and followed the v7 to v8 (save root) process MT created and all is well.

[Q] SIM Card issue...

So, I just sold my working Revo to someone. It had stock V8 w/root & CWM installed. I decided (probably the wrong idea) to bring it back to V7 (via CWM and MT's V7 zip) and then removed the root. Now, it won't activate with a new SIM...doesn't recognize it.
With that said, I'm guessing the problem has to do with the V7 version it's on now. So, my thought was to bypass activation and load the V8 tot file.
Does that seem like the best course of action to get around the SIM missing issue?
Thanks,
Jamie

Sounds like a good idea. SIM issues usually arise when the radio software don't match with the actual android software. both radio and system have to be the same version, ie v7 or v8 or v9.
Just flash the v8 tot with the lg software from your pc and you should be good.
--I.M.famous

Thanks, wouldn't MT's V7 zip file replace the radios though? Also, I'm guessing the vol up-vol down-back-search method works to bypass activation on the Revo?
Thanks,
Jamie

The radio software is replaced during boot, iirc.
I think there was a thread on the general section about skipping activation. I'll have to look.
My REVO is Broken, Thunderbolted, Supercharged, and Smurf'd

You could just re-install the zv7.tot then update over the air to zv9. Also, Hopefully you are smart enough and are using a correct sim card for the phone.

Got it all squared away. Just installed the V8 tot and everything worked just fine. Thanks for the responses...

[Q] Installing ICS from CM7.2?

Hi,
Sorry if this seems like a dumb question - A bit confused from reading up all the info on upgrading to ICS on the p990.
Im running a volk custom kernel, and CM 7.2 - OS Version 2.3.7.
Whats the "best" way to upgrade to the new ICS? I tried running the LG software update but it doesnt go too well, fails after it tries to detect phone - even though it detects it initially.
Can I get the release that LG released with my setup?
Please advise.
Thanks!

Same situation here. I'm on official cm7.2 and would like to upgrade to ics. But don't think that useing official lg update tool is so good idea - it might brick your phone. It won't update to ics because you aren't running the official GB rom so lg update tool won't upgrade (correct me if i'm wrong).
Maybe the AIO tool would do the trick.
Anyways, people we need your advice!

LOL, use NVflash ICS rom like TG.

for me the best way is using the toolkit to install new partition, new bootloader and recovery
than boot into recovery and flash the room as usual

Thanks Wakata.
Much appreciated. I have tried downloading the toolkit but its always corrupt.. ill download the 7 zip format.
I take it that I will need to back everything up and wipe everything, install new partition, boot loadder and recovery(CWM??), then flash with the new rom and kernel?

I've also used the All-In-One P990-Toolkit to upgrade to ICS.
You can use 1. to backup your internal SD in case you need it later.
Then hit 4. to change the partition layout and after that 8. to flash the new unlocked bootloader. That's all.

Thanks again
Slight problem - I downloaded the 7z file, and extracted them, but cant seem to run the .cmd file? What am i doing wrong here?

scratch that last question.. for some reason the files are corrupt when i download them.. grrrr.

So I followed the instructions, and suprise suprise, I get an error -
Nvflash started
nvflash configuration file error: file not found
An error occured. Read above lines for details
Help please

Nevermind, I had a fiddle and flashed ics 6.0.xxx.. lets see how it goes. Hopefully I havent bricked it lol

Sorry, problem.
I first tried option 1, then 4, then 8.. after its all done, no errors - I boot the phone, and its stuck on the red LG logo.. I've left it there for around 10-15 mins with no luck? Help!

Haha, actually I figured it out. I did realise I didnt have a ROM! Doh! lol rookie mistake.
I downloaded this rom and kernel(1.4ghz OC) and its running pretty well, no bugs so far(touch wood)