I am on GB Rocket ROM v23, with Franco Kernal V8. It has been working pretty well with one exception, that the screen occasionally won't switch on when the phone has been asleep for a while.
I have been trying to flash the updated Franco Kernal, and the Abyss kernal too. When I try to flash them with CMW it says they install OK. Each time I re-boot I get as far as the boot animation and it won't boot up. I then restore the backup and all is fine. But unfortunately I can't try a new kernal
I have also tried cleaning the old kernal with jbroid script
I would be grateful for some advice on how to solve it. Thanks
chriswilson_m3 said:
I am on GB Rocket ROM v23, with Franco Kernal V8. It has been working pretty well with one exception, that the screen occasionally won't switch on when the phone has been asleep for a while.
I have been trying to flash the updated Franco Kernal, and the Abyss kernal too. When I try to flash them with CMW it says they install OK. Each time I re-boot I get as far as the boot animation and it won't boot up. I then restore the backup and all is fine. But unfortunately I can't try a new kernal
I have also tried cleaning the old kernal with jbroid script
I would be grateful for some advice on how to solve it. Thanks
Click to expand...
Click to collapse
Try a fresh install choose stock rom (kk9) flash via PC Odin then root then do all the wipes in cwm ad try install custom rom and kernel
Related
I tried to install the illuminance Rom last night, and it kept getting stuck at the ATT logo. I reflashed back to stock did a master clear, flashed a stock 2.3.5 uckj3 gingerbread Rom with corn kernel v307 also ATT gingerbread boot loaders. I used CWM to install the ROM, it'll restart then get stuck and get stuck at the ATT logo....is there something I'm missing? I've installed other ROM and have had no issues until now?!?!
If you used Corn kernel, are you sure you where on RFS format and not ex4?
it was rfs format before I tried to install
Did you make the file (don't remember exactly wich) that disable Voodoo. There is no reason for it to bootloop. After you flashed stock did you let it boot up? Maybe try with Boog kernel to flash then flash wich ever kernel you want to use?
I'll try the boog kernel.....I also ensured that the lagfix for system and data was disabled through CWM recovery ....in the install instructions it stated that it would take awhile to boot, I let it set for two hours. One thing I noticed is that 150 jpegs were installed
Sent from my SAMSUNG-SGH-I897 using xda premium
Doubt this might be it but, If you set it on CWM to disable lag fix reboot in cwm then flash. Random thought.
LOL....did that also.
Sent from my SAMSUNG-SGH-I897 using xda premium
Guess I'll start over clean again....
SGH-I897 Cappy
I897UCKJ3 2.3.5 Gingerbread
Corn kernel UCKJ3 V307
FASTY III V1 KJ3
Tegrak OC Ultimate
lilbigdude1 said:
Guess I'll start over clean again....
SGH-I897 Cappy
I897UCKJ3 2.3.5 Gingerbread
Corn kernel UCKJ3 V307
FASTY III V1 KJ3
Tegrak OC Ultimate
Click to expand...
Click to collapse
My boot getting stuck got fixed after Wipe data/factory reset in CWm, wipe cache, wipe Dalvik cache, - all three -then install illuminance. Tried that ? Starting from stock KJ3 no bootloaders.
Importantly: Can you boot with just Illuminance boog kernel (the one that comes wiht the ROM, no other kernel flashed)? I presume you cannot boot a fresh Illuminance install............if this is the case wiping as above should help.
I finally got illuminance to install, and is working great.
this may seem like over kill but everytime I flash a new ROM I start from scratch and flash to stock and master clear and then build from therethis is the first time that I ever had any issues by doing it this way. usually I have it setup up in 10 to 15 minutes it seems to save any issues later down the road as far as being buggy.
Glad to hear it
Hi, I tried to install Illuminance 1.1, but I think the file is corrupted. I downloaded it twice, from different locations, and its the same zip file.
I tried to decompress it before installing it, just to check file consistency, but lots of files can´t be decompressed.
Anyone had this problem? If not, any way /any where to safely download it?
Thanks!
In the Illuminance Rom Thread, in the OP, there is a link to IlluminatedOne's website, where u can find a good non-corrupted download and u will also find the installation instructions.
Not sure why u think u had a corrupted download ?? But u should b good to go once u get to the website.
As of this version 1.1 release, u should only be downloading the Illuminance Rom from said website.
Sent from i897uckj3
I downloaded my version from Mega-upload. I tried it again last night just for...you know....and received the same results of being stuck on the att logo for hours. as usual i flashed to stock and master cleared, GB boot loaders, reinstalled stock 2.3.5 and reinstalled luminance and before i rebooted i installed the samurai kernel, then rebooted and everything worked as normal....so being fairly new to the whole Dev scene i don't know why that would make a difference, but it works fine and it didn't get stuck on the att logo.
oh and thanks twin I'll try and go to the website and check it out
ok guys tere is the thing, i used rocket v21 with abyss 4.0 for a while, worked fine
then i decited to go from v21 rocket to leaked ics, i flashed with odin and it stucked in hidden, then i try to flash stock rom (older LA4-2.3.6) and also stud at hidden please help!
Thank you for your answears
You will need to get phone into download mode and flash stock rom with pc odin. Follow Dr.Ketans guide here forum.xda-developers.com/showpost.php?p=20963718&postcount=2.
That should get you back to stock gb rom
go to recovery, flash abyssnote kernel 3.9, reboot recovery, restore your nandroid backup, done.
i,m also stuck at hidden when trying to flash stock with odin...done evrythin correctly. :/
hgberry said:
go to recovery, flash abyssnote kernel 3.9, reboot recovery, restore your nandroid backup, done.
Click to expand...
Click to collapse
i cant even get to recovery mode
Hi, i'm running Teamhacksungs build 17, and just tried upgrading to new Semaphore 1.2 (regular and s version).
Started by running kernel cleaner script from CWM.
First tried the regular version, and phone would not boot anymore past the Semaphore kernel splash screen.
Then i tried the s version (aka. bigmem configuration), and after succesful flash trough cwm and boot, now my phone freezes at kernel splash screen. To make matters worst, CWM through three button combo is not working anymore!
Bootloader still works, so i was wondering, is it possible to flash new ics kernel with CWM through odin? I really dont want to re-stock my phone with GB and then start the whole ics upgrade process all over again, specially cos my backups are not fresh . (I know, stupid me).
Any help would be great!!
I think you can flash mid night kernel using odin.
Sent from my GT-I9000 using Tapatalk 2
Try another rom
This rom cleanAOKP 1.0.2 have already update to semaphore 1.2
http://forum.xda-developers.com/showthread.php?t=1552124
Hi All,
I'm newly registered as I have problem in using HydraCoreNirvana Kernel.
I was using ZSLPN ICS Stock ROM with PhilZ-cwm6-ZSLPN-OZS-v2.7 Kernel.
A few days ago, I booted into CWM (Power + Up + Home) to flash MaxFu_HydraCoreNirana_n3_std.zip kernel.
HydraCore Kernel is working fine except that this kernel uses a lot of battery according to the
battery monitor. I keep using it for 3 days to make sure the whole system is stable after flashing a new kernel
but it is still consuming a lot of power.
Today, I boot into CWM (Power + Up + Home) to flash back the PhilZ-cwm6-ZSLPN-OZS-v2.7.zip kernel.
After flashing, I select reboot system, the "Galaxy Note N-7000" shows up and then black screen, i.e. without
the boot animation screen. I wait for a long time but still black screen. I tried to power up serveral times but same
thing happen. I then boot into CWM (Power + Up + Home), I can see PhilZ CWM so the PhilZ kernel should be flashed.
I then use this PhilZ CWM to flash Hydra kernel again and then reboot system. It can boot up.
I then try to boot into CWM to flash PhilZ kernel again, same problem. Now I flash back to MaxFU_HydraCoreNirana Kernel.
What's wrong with my procedures? Any idea? Now, I'm afraid to flash any other kernel as I am afraid I cannot flash
back to MaxFu Kernel and that will brick my phone.
Please help. Thank you so much.
I cannot post in Max_FU kernel thread as I am new here and not allowed to post there.
http://forum.xda-developers.com/showthread.php?t=2053084
Thanks.
It is happening because the latest Hydracore kernels have the new Mali drivers, which are incompatible with previous kernels. So, when you first flashed Hydracore, it also installed these new drivers; when you flash PhilZ kernel back, the new drivers are still there, so the kernel can't boot up. The solution is to install a "revert" package which will install and older Hydracore kernel (without the new Mali drivers), and also delete the installed drivers. Search the Hydracore thread for "Returning back to Hydra v5.3 std.zip". This is the file you should get and flash through CWM. After that, you can flash PhilZ kernel again.
To make it easy, download and flash returning back to hydra.zip 1st. After that you can flah philz kernel.. You can go to philz tread you kernel has been updated to v3.99
dbolivar said:
It is happening because the latest Hydracore kernels have the new Mali drivers, which are incompatible with previous kernels. So, when you first flashed Hydracore, it also installed these new drivers; when you flash PhilZ kernel back, the new drivers are still there, so the kernel can't boot up. The solution is to install a "revert" package which will install and older Hydracore kernel (without the new Mali drivers), and also delete the installed drivers. Search the Hydracore thread for "Returning back to Hydra v5.3 std.zip". This is the file you should get and flash through CWM. After that, you can flash PhilZ kernel again.
Click to expand...
Click to collapse
Thank you so much for the detailed description. I've not noticed that Mail drivers are being installed.
zai89 said:
To make it easy, download and flash returning back to hydra.zip 1st. After that you can flah philz kernel.. You can go to philz tread you kernel has been updated to v3.99
Click to expand...
Click to collapse
Hi zai89, thank you so much for your file. I flashed it and then I can flash back to PhilZ newest version.
By the way, I have used your file (v5.3 std kernel) for a while and it consumes the power normally. I still don't
understand why the HydraCoreNirvana drains huge power in my ROM (of course I am not complaining about
HydraCoreNirvana kernel, maybe my ROM problem). Since now I can flash back to PhilZ kernel, I may try
the v5.3 standard you suggested and see how good it is.
Once again, thank you very much for your time and kindly help.
Hi
I can't seem to flash anything from philz kernel on any jb rom. So when I flash a rom I flash franco kernel 6 and then the rom and it works fine, but I want to flash Darboc's transparent mods on ultimate jb rom, but it just freezes (like it does when installing a rom) and when I try to reboot It gets stuck on the boot screen or I just can't get out of recovery. I then need to flash franco kernel 6 and flash the rom again. I'm also unable to wipe system in philz recovery. I have also tried to flash the new version of philz kernel, but it freezed when flashing the kernel. Then I ran a kernel cleaning script and flashed the rom again but it still does the same.
Any suggestions will be appreciated.
get back to ultimate rom the latest version. if it doesnot have Philz 3.99 version of the kernel, then instead of installing the new version using recovery. try using mobile odin to flash the tar version of the kernel. then try flashing what ever you want. hopefully this time it will work
Iconia500 said:
Hi
I can't seem to flash anything from philz kernel on any jb rom. So when I flash a rom I flash franco kernel 6 and then the rom and it works fine, but I want to flash Darboc's transparent mods on ultimate jb rom, but it just freezes (like it does when installing a rom) and when I try to reboot It gets stuck on the boot screen or I just can't get out of recovery. I then need to flash franco kernel 6 and flash the rom again. I'm also unable to wipe system in philz recovery. I have also tried to flash the new version of philz kernel, but it freezed when flashing the kernel. Then I ran a kernel cleaning script and flashed the rom again but it still does the same.
Any suggestions will be appreciated.
Click to expand...
Click to collapse
When u flash kerenel u have to reboot into recovery so that flashing could take effect.
PhilZ JB kernel's are safe to wipe and philZ kernel's are best for TW based ROM's.
So if u running CM10,CM10.1,AOSP,AOKP,PA ROM's u shuold look for Hydra,Franco,etc..
And make sure that u reboot into recovery when u flash kerenel...
nokiamodeln91 said:
get back to ultimate rom the latest version. if it doesnot have Philz 3.99 version of the kernel, then instead of installing the new version using recovery. try using mobile odin to flash the tar version of the kernel. then try flashing what ever you want. hopefully this time it will work
Click to expand...
Click to collapse
Hi thanks for the reply, I managed to flash the kernel with mobile odin, but I'm still unable to flash in cwm.
Are you able to format system with other kernel?
nokiamodeln91 said:
Are you able to format system with other kernel?
Click to expand...
Click to collapse
Yes and I always do before flashing a rom.
Not sure then why this is happening. I tried the same and I am able to format or flash mods using philz
nokiamodeln91 said:
Not sure then why this is happening. I tried the same and I am able to format or flash mods using philz
Click to expand...
Click to collapse
Thanks for your help anyway, at least I'm on the latest philz kernel now.