Related
For someone with no security concerns, it is pretty safe to disable the lockscreen without any risk of but dialing.
From what I searched in the forums, this can be done in two ways:
1 - Phone -> *#*#7594#*#* -> Check shutdown, which works perfectly, easily reversible, no coding, but has the undesirable side effect of also disabling the extended power menu.
2 - Some tools like NoLock that you can easily find in the market, however you get another icon in the notification bar, and sometimes the lockscreen still shows up.
I was wondering if there is a way to disable the lockscreen without these weird sideeffects, either with a modified framework (like $omator's way to change the icons), or with a script.
Thank you in advance
I am using Simplicity's ROM, based on STOCK, so I don't have that option from CM7
This may very well sound silly, and maybe its because im using CM7.1 but there is a setting in location and security... no lockscreen
Is it there for you? or does that not work?
NoLock's widget doesn't have any notification space used or wasted, and it works 99% if the time for me... *shrugs*
Sent from my MB860 using xda premium
Hallo,
I have CyanogenMod 9.0.0RC2 on my Galaxy S. When I unlock the screen it always vibrates. The only option to disable I found with Google is to use Apps as LockScreen. However I want to disable it without using other Apps. Where can I do that setting? If it is not possible, what's the reason for that? Haptic feedback is disabled globally under Settings -> System -> Notification Bar ("Benachrichtungsleiste")
Thanks for your help.
Code:
[B]Disclaimer[/B]
You are entitled to NO support, I will do my best, but my time is limited. Everything you receive here is a bonus and given AS-IS.
If you need really stable ROM, I recommend you use Stock.
I'm not responsible to any damage you cause to your device.
All the flashing is on you.
I'm not a developer, I'm just an enthusiast trying to learn.
Introduction:
Hello guys,
Thanks to the team behind AOSPA-Legacy we now have our device succesfully merged into their git. This means that our device is now officially supported, and should be getting auto builds.
You can follow AOSPA-legacy community on G+ for latest updates.
Click to expand...
Click to collapse
Images and videos:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Click to expand...
Click to collapse
Features:
EternityProject RILJ by @kholk
lights library by @arararagi
Click to expand...
Click to collapse
Installation instructions:
1. DOWNLOAD YOUR ROM
2. DOWNLOAD THE LATEST PA 4.4 GAPPS PACKAGE from OFFICIAL 0-Day PA-GOOGLE APPS
3. BOOT TO RECOVERY
4. FACTORY RESET
5. WIPE CASHES
6. INSTALL
Click to expand...
Click to collapse
Download links:
ROM
pa_p880-3.99-RC2-20131012.zip
Old builds:
pa_p880-3.99-RC2-20130924.zip
pa_p880-3.99-RC2-20130921.zip
pa_p880-3.99.1-RC1-20130918.zip
pa_p880-3.99-20130912.zip - 150.71 MB
pa_p880-3.99-20130831.zip
pa_p880-3.99-20130902.zip - 150.69 MB
pa_p880-3.99-20130903.zip - 150.63 MB
pa_p880-3.99-20130904.zip - 150.64 MB
GAPPS:
http://download.paranoidandroid.co/Developers/TLKruzze/gapps/
http://goo.im/devs/paranoidandroid/roms/gapps
Click to expand...
Click to collapse
Thanks/Credits:
ParanoidAndroid
CyanogenMod
AOSP
@kholk (EternityProject) for new RIL implementation
@arararagi for his lights library
arcee for being our CM device maintainer. Without him none of this would exist!
molesarecoming & D4rKn3sSyS for founding and inventing ParanoidAndroid.
XDA:DevDB Information
[ROM] [4.4.2/4.3] [Paranoid Android 3.99/4.0][Official AOSPA-LEGACY], a ROM for the LG Optimus 4X HD
Contributors
dcos, JoinTheRealms
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.1.x
Based On: AOSPA, AOSP, CyanogenMod
Version Information
Status: Beta
Current Stable Version: 3.99-RC2
Stable Release Date: 2013-10-12
Current Beta Version: 4
Beta Release Date: 2014-03-26
Created 2013-09-14
Last Updated 2014-03-31
Reserved
Hybrid Properties – DPI / Layout / Colors
Settings / Hybrid Properties / (swipe right)
Interface – Here you can define your workspace layout and assign global properties (Phone UI / Phablet UI / Tablet UI).
Apps that have been set up manually will override global properties. These are simply preset options available to the user as a base.
Apps – Define individual properties to customize how the app displays. These settings apply only to the selected app.
Lock Screen - The lock screen is controlled by the "Android System" app. Make changes to this app to control DPI, Layout and Color.
Apps - Size vs Layout
Size allows you to change the DPI of the selected app
Layout changes the outlook of the app by defining which screen size it should use (changes may be slight or drastic, this is up to the app)
When layout is adjusted, sometimes you may have to adjust the size to make sure items fit neatly.
Colors
Settings - Hybrid Properties - Interface - GLOBAL COLOR (enable)
For every app installed (system apps & user app) you can set individual colors for the status bar and navigation bar. This can be done globally or on a per app basis. In order to enable hybrid colors you MUST enable per app color
Color - Transparent Status bar/Navigation bar
Transparency for both the status bar an nav bar should be set only on the launcher (default launcher or installed launcher of choice). Setting transparency on some individual apps will return "garbage" as apps don't draw under the status and nav bar. It's best to set a solid color for the status bar or nav bar in individual apps.
Color - PIE Colors
PIE color is based on status icon color, navigation glow color and navigation button color.
Tools
Reset properties
Backup preferences
Restore Preferences
Delete Backup
Expert Mode – this gives you deeper control over the hybrid engine. Options included are overall DPI and UI settings and extra options per-app.
Once expert mode is selected, under the interface option you would now have access to the lockscreen slider and Global Apps control.
The lockscreen slider allows you to change the DPI of your lockscreen, while the global apps section allows you to change the settings for all system apps or user app at once.
On a per-app bases you now have an extra menu with three options when expert mode is enabled (Expand / Force / Large)
Expand – displays app in full screen mode
Force – force scaling through other hosts such as widgets
Large – Force app to display as though it were displaying for a large tablet
I think everyone pretty much understands Expand.
Force
In short, it allows widgets to succumb to hybrid properties.
Widgets depend on the launcher to define its size/layout parameters. So normally, even if you setup an app to follow a custom layout, the widget ignores these scaling values and uses its default settings as dictated by the launcher. Force allows you to override this system and the hybrid values of the app would be forced on to the widget.
Use this feature cautiously and enable it only if you need it.
Large
Sometimes, changing the layout of an app to Tablet UI isn't enough to actually change the layout of the app. For such apps, enable the large screen option to see the difference.
For some apps, enabling Large give it a whole new layout, additional to the available layout options.
Again, use this option only if needed.
Per app full screen
Nexus 4 - Paranoid Android - Hide NavBar in Specific Apps
Mini tutorial – getting the best out of dash clock
https://plus.google.com/u/0/107979589566958860409/posts/VaJphjUqZx8
Miscellaneous Settings/Features
Settings – Toolbars
Quick pulldown - Edge of status bar will pull down quick settings
Circle battery
Quick Settings Panel - Options (reorder tiles, add new tiles, auto-close panel when tile is selected)
Settings – Display
Display Brightness sensitivity
Pulse notification light - Custom LED colors for notifications
Font Size
Settings – Users
Multi-user accounts (Lockscreen MUST be in landscape orientation to switch users)
To use multi-user:
Turn on lock screen rotation
Go to Settings - user
Create new user account (restricted or normal)
DONE!
Switching Users
Go to lock screen (turn off / turn on screen or use quick toggle tile)
Switch to landscape orientation
Select user account
Settings – Lockscreen
Background – Custom image
Allow rotation – Enables landscape mode on lockscreen
Quick unlock - no need to press enter when entering lock pin
See through lockscreen (exactly what it sounds like!)
Home screen widgets - allow widgets from the homescreen to be added to the lockscreen
Maximize widgets - lockscreen widget always maximised
Shortcuts - add shortcuts to the lockscreen
Settings – Language & Input
Disable fullscreen keyboard - Landscape keyboard will not take up the entire screen
Settings – Sound
Volume panel style - Single / Expandable / Expanded / None
Quiet Hours – Configure hours the device should be silent
Volume rocker music controls - long press volume control to seek tracks
Volume rocker wake - turns screen on when volume is pressed
Settings – More
NFC Polling modes (screen off / screen on, locked / screen on, unlocked (default))
Phone - Settings - Blacklist - (Enable Blacklist)
Expanded Desktop Mode (Full Screen Pie Mode)
Long press the power button and select Full Screen (PIE) – this removes your status bar and navigation bar and activates the PIE controls. All screen real estate is utilized without stretching or distorting your homescreen.
The stock Paranoid Android launcher has the option to use a pinch gesture to toggle this mode.
There is also a quick setting PIE tile to toggle PIE mode
- To activate PIE without activating Full Screen mode (PIE and status bar at the same time), you need to set your nav bar to 0%. Do this by going into
Settings -> Hybrid Properties -> (swipe right) -> Interface -> (slide nav bar to 0%).
Because the status bar is still visible, PIE will not show status information when activated like this as such information would be redundant.
Reserved
Paranoid Android - Main Features
PIE is an unobtrusive replacement for the stock on-screen navigation buttons. It stays hidden off-screen, only to be brought to life by a predefined gesture. PIE can be manifested on all four sides of the devices.
PIE isn't just about a new navigation experience, either – it also offers customizable colors, status information (like clock, date, et cetera), notifications, and toggles. One nice thing about PIE is that it's dynamic, meaning its size will be defined by the device's dpi; in other words, you won't see a stretched phone UI on a tablet.
Hybrid Mode
This Rom features true Hybrid Mode… it lets you scale and project every app, every widget, even system components individually. Remember, android is modular, everything is an app (Lockscreen, navigation bar, dialogs, popups, keyboards, widgets and your regular apps of course).
Apps have the capability to switch into various designs or layouts according to the device they run on. This can result in a complete new experience as many apps will transform to the better.
For every element that you like, chose a mode (Phone UI, Phablet UI, Tablet UI) and/or a size. Regardless of the mode selected, you are 100% independent of the system DPI which runs nicely in whatever value it has been assigned to.
You do not need to boot your phone into a certain DPI. Neither will most of the changes you apply require a reboot.
What is DPI?
Dots Per Inch. As the name defines, DPI is the number of dots per inch of a screen.
In PA, we can modify DPI of any & every app or service independently.
Lower DPI value, would cause a general shrinkage, & higher DPI value, would cause the app to get bigger.
In general, we have a few standard DPI values:
xHDPI: 320 DPI | HDPI: 240 DPI | MDPI: 160 DPI | LDPI: 120 DPI
Per App Color
Part of the Hybrid Engine allows you to color the status bar and navigation bar for individual apps. This completely transforms the user interface and allows for customization on a completely different level.
HALO (2.0)
What this update brings...
Version 2.0 of HALO retains all the original functionality of HALO as described below, with the added bonus of
1. The actual notification is displayed as opposed to just the notification text
2. As a result of point 1, some apps can provide you with a "richer" notification experience (notification widgets).
The most common use of notification widgets would be found in music apps, however, any app can create this type of notification.
Remember, this is dependent on the app itself. HALO does not control this behavior and is not responsible for creating the widget.
As long as the feature is supported by the app however, it can be displayed in HALO without the need for any additional HALO configurations.
These notification widgets can be interacted with via multi-touch. One touch to drag HALO and hold the notification on screen, the second to select an option in the notification widget.
Activation
Pull down (status bar) or swipe up (PIE) the notification shade, tap HALO icon
NOTE:
Animator duration scale must be turned on, at least .5x or higher (Don't know what this is, don't touch it)
Deactivation
Reverse HALO Checked* - Double tap HALO, hold on second tap and drag over red X
Reverse HALO Unchecked* - Tap and drag HALO over the red X
*Reverse HALO option: Settings - Toolbars - Reverse HALO
Move HALO - Same as deactivate but DO NOT place over the red X. Instead, drag to screen location you would like HALO to dock at.
Settings - Toolbars - (HALO)
HALO Policy - Choose either blacklist or white list
Blacklist - select the apps that WILL NOT appear in HALO
Whitelist - select the apps that WILL appear in HALO
Hide HALO after activity - HALO will appear for incoming tasks and scroll out of sight after a short while.
Reverse HALO - Swap the task switching and moving gestures
Re-size HALO - Select between predefined HALO sizes
Pause Active App - When opening an app in HALO, the underlying/active app will be paused
Gestures
Swipe Up (marker 1) - Dismiss Notification
(persistent notification CANNOT be dismissed - just like your status bar)
Swipe Up (marker 2) - Dismiss All Notifications
Swipe Down (marker 1) - Hide HALO
(HALO immediately goes into hidden state, bypassing normal hide delay)
Swipe Down (marker 2) - Silence HALO (New notifications will not cause HALO to pop-up until the user "wakes" HALO)
Swipe Left/Right - Swiping away from HALO allows you to scroll through notifications (if multiple notifications exist).
Buglist & changelog
Just standard CM/PA "bugs" (if there are any )
Changelog:
12.10.2013:
Button backlight notification for 2 sec when USB/charger is plugged in (Settings->Display-> Battery light - has to be enabled)
Some GPS tweaks
Added HALO))) to the build
Built with Linaro24.09.2013:
Removed ParanoidOTA.apk
Added Torch21.09.2013:
Volume button wake: (Settings->Buttons->Volume button wake)
Proper control over button backlight, you can now enable/disable Notification Light, Battery light, Battery low light (Settings->Display->Pulse notification light and Battery light)
Upstream fixes18.09.2013:
Paranoid Android 3.99 RC1
Menu key is properly detected by apps12.09.2013:
Added lights library all thanks to @arararagi
Disable backlight during charging04.09.2013:
Add EternityProject RILJ all thanks to @kholk03.09.2013:
Add LG camera HAL parameters02.09.2013:
Navigation bar disabled by default
Hardware buttons back light & custom actions control
Vibrator intensity control31.08.2013: Initial build
---
I'll try thank you very much
Sent from my LG-P880 using xda premium
Thanks for the rom, i will try to used! I was waiting for this rom for a while:good:
Finally PA for our device, thanks very much! I'm downloading now, will report later!
nice work, but an important Q: what device tree and what kernel are you using?
please put this information into your OP for being fully GPL compliant you might wanna take a look at this
laufersteppenwolf said:
nice work, but an important Q: what device tree and what kernel are you using?
please put this information into your OP for being fully GPL compliant you might wanna take a look at this
Click to expand...
Click to collapse
Yes, you are completely right. Thanks I'll update it. Device and kernel tree are the ones from official CM.
Sent from my lg-P880 using XDA Premium 4 mobile app
EDIT: sources stated in third post, hope it's OK now
Could just resist and flashed
About this advanced settings FC's , it is normal for non official PA. I have the same on Galaxytab 7.0, maybe it contains device specific settings I don't know
But I found serious bug... My external SDcard is not detected :/
EDIT: Wait !! It is mounted on /storage/sdcard1 , but just doesn't show up normally with X-plore like it did on 4.2.2
EDIT1: Bug with busybox and Xposed, same as in SlimBean 4.3 by Demetris, Xposed could not be installed because of busybox not being found.
FunkyRasta said:
Could just resist and flashed
About this advanced settings FC's , it is normal for non official PA. I have the same on Galaxytab 7.0, maybe it contains device specific settings I don't know
But I found serious bug... My external SDcard is not detected :/
EDIT: Wait !! It is mounted on /storage/sdcard1 , but just doesn't show up normally with X-plore like it did on 4.2.2
EDIT1: Bug with busybox and Xposed, same as in SlimBean 4.3 by Demetris, Xposed could not be installed because of busybox not being found.
Click to expand...
Click to collapse
Device specific settings are pa bug.
Es file explorer can normally see sd card
I haven't tried xposed yet. I suppose you flashed 4.3 framework?
Sent from my lg-P880 using XDA Premium 4 mobile app
FunkyRasta said:
But I found serious bug... My external SDcard is not detected :/
EDIT: Wait !! It is mounted on /storage/sdcard1 , but just doesn't show up normally with X-plore like it did on 4.2.2
Click to expand...
Click to collapse
well, this "bug" should not be that big of a problem OP should easily be able to fix the mountpoints inside the ramdisk
(if not, just PM me )
Also I had problems with HybridEngine and HybridProperties not remembering per app DPI and Layout settings :/ Now flashed SlimBean, I miss that rom
the backlight hardware button doesn't light off, and i can't find the setting to configure the timeout. another thing is, can you disable the soft navigation by default? kind of redundant, and the hardware button light not switching off bug just made it twice more annoying.
FunkyRasta said:
Could just resist and flashed
About this advanced settings FC's , it is normal for non official PA. I have the same on Galaxytab 7.0, maybe it contains device specific settings I don't know
But I found serious bug... My external SDcard is not detected :/
EDIT: Wait !! It is mounted on /storage/sdcard1 , but just doesn't show up normally with X-plore like it did on 4.2.2
Click to expand...
Click to collapse
@FunkyRasta Can you be more specific? I belive that external SDcard is mounted on /storage/sdcard1 by default on CM 10.2. It shouldn't be much of a deal to change it, however I don't want to deviate from CM or PA standard is it's not really neccessary, where do you think external SD should be mounted?
FunkyRasta said:
EDIT1: Bug with busybox and Xposed, same as in SlimBean 4.3 by Demetris, Xposed could not be installed because of busybox not being found.
Click to expand...
Click to collapse
No problem here mate, check the screenshots below.
Please make sure you followed procedure to install Xposed on 4.3
How to install Xposed on 4.3 based ROMs:
1. Install XposedInstaller_2.1.4.apk DON'T USE IT
2. Reboot to recovery and flash cwm-Xposed.JB4.3.Framework.Installer.zip
3. Reboot and use Xposed Installer to enable modules, etc.
gingerboy92 said:
the backlight hardware button doesn't light off, and i can't find the setting to configure the timeout. another thing is, can you disable the soft navigation by default? kind of redundant, and the hardware button light not switching off bug just made it twice more annoying.
Click to expand...
Click to collapse
@gingerboy92
I hope to introduce backlight hardware buttons control in next build, should be ready until the weekend.
Soft keys can be disable by setting navbar height to 0, tt will be defaulted in next build.
FunkyRasta said:
Also I had problems with HybridEngine and HybridProperties not remembering per app DPI and Layout settings :/ Now flashed SlimBean, I miss that rom
Click to expand...
Click to collapse
Also no problems here, can anyone else confirm this?
This installs Xposed without the need to flash anything: http://forum.xda-developers.com/showthread.php?p=45149120
Sent from my LG-P880 using Tapatalk 4
Build 02.09.2013
New build is uploaded, OP updated.
Try it.
Changes:
Navigation bar disabled by default
Hardware buttons back light & custom actions control
Vibrator intensity control
no way to delete
About these problems that were reported.
Sure card is mounted right, it wasn't just showing in Xplore
And about hybrid engine, perhaps I just needed reinstall, because no users reported it and you
Gonna comeback to PA as soon as I set up dual boot
Sent from my LG-P880 using xda app-developers app
Standard Disclaimer Your warranty is now void.
I am not responsible for bricked devices, dead SD cards, or any other issues that may arise from flashing this ROM !
Hi guys. Here is my new project : AOKP.It has lots of features and has same theme support with cm10
Features
Android 4.1.2
Superuser & Busybox preinstalled
Deodexed
180 Degree rotation
Built in performance/init.d configuration (Thanks Kejar & company)
Custom Power Menu
Brightness slider in navigation bar.
Custom color for anything in RC
Custom Clock Color/Location: Right, Center, Disable
Battery Icon/ Color Picker: CircleMod, Bar, Text Only, Icon Only, Icon+Text or None
Battery Bar in Status Bar or Nav Bar, Bar Thickness, Charging animation
Nav Bar Transparency
Nav Bar Button Reorder: Back-Home-Search-Menu
Nav Bar Color Picker
Nav Bar Button Glow Duration: Off, Fast, Slow
Nav Bar: Long press to Search button
Nav Bar Hide on Lockscreen
Toggles in Pull Down Menu: Auto rotate, Bluetooth, GPS, Wi-Fi, Aiplane mode, Vibrate, Silent, Sync, Data, 4G, Tethering, Torch, Brightness
'Traditional' toggle layout (where the toggle are on the very top) -- find in RC > Statusbar General > Layout
LCD Density (Careful with this)
Menu Button location: Right, Left, both, Remove
Menu Button Visability: Always show, Always show Invisible Icons
Lockscreen Style: Stock, Quad, Octo, ol' gingerbread
Lockscreen Wallpaper
Lockscreen color changer
Lockscreen calendar
Lockscreen SMS customizable shortcut (with icons)
Lockscreen Horizontal Option
Performance Menu: (Use With Caution) Max/ Min CPU, Scaling Governor
Unlock Sceen with Legacy Menu Icon
Volume Key to Wake Screen
Volume Key to Skip Tracks
Long-press back button to kill process
Disable CRT off animation
LED pulse settings (time on/off)
ICS ringtones/notification sounds
Customize carrier text to whatever.
Power Menu options: Boot to recovery/ Boot loader, Reboot, Screenshot
Facebook contact sync integration (must wipe to get this)
Disable Boot animation
Keyboard: Volume keys act as a cursor while typing -- disable in keyboard options
Long press home for recent apps (thanks brucekey)
Quick torch (enable in ROMControl, long press power when phone turned off. See the magic.)
Fast charge toggle for maguro/toro for kernels that support it
Weatherpanel in notification drawer
Weather on lockscreen
Click to expand...
Click to collapse
WORKING LIST:
Booting
Touch Screen
Baseband (GSM/phone/messages/3G/2G/mobile data)
Headphones
Sounds
SD Card detection
Working HW acceleration
OMX
Stock Gallery
Video Playback
Browser
Keyboard
Usb Mass Storage
Youtube LQ/MQ
Deep sleep
Animations
GPS
Google play
Camera
Video recording
Wifi
Bluetooth
Wifi tethering working
Usb tethering working
Bluetooth tethering working
NOT WORKING :
Panorama
Live wallpapers(Never used these)
Installation
1. Wipe data/ factory reset
2. Wipe cache partition
3. Advanced/ wipe dalvik cache
4. Advanced/ wipe battery stats
5. Install zip from sdcard and reboot your system
Tips on using the ROM:
Camera:
If you are not satisfied with the quality and performance of the stock camera app, "Camera jb+"(from playstore). And use videocam illusion pro for recording videos.(Again from playstore). It will produce better quality images.
Performance:
To make the UI transitions faster, you can use the good old standard tip:
Go to settings->developer options
Set 'window animation scale', 'transition animation scale' and 'animator duration scale' all to "0.5x" or "0/off". UI animations will seem twice as fast after doing this.
If the ROM becomes slow over time, do a reboot.
And try not to do a lot of stuff in the first few seconds when SD card scanning is going on, sync is going on or when apps are updating in the background. Its not right to complain of "this/that doesnt work" or lag when you do that .
Gapps:
Use gapps this way:
1. Install gapps
2. Install playservices from a previous backup.
3. Freeze google apks like playservices, backup transport, contact sync, network location, picasa uploader etc except "playstore, google account manager, market update and google services framework" (basically freeze every google apk except these)
4. Add google a/c and use playstore normally.
5. If you don't have a playservices backup, let market download it and freeze it after that.
XDA:DevDB Information
[ROM][JB][4.1.2]AOKP Jellybean[17-11-2014][UPDATE][DISCONTINUED], ROM for the Samsung Galaxy Mini
Contributors
Venkatesh, Venkatesh, Aokp, Cm, Androidarmv6, moltenmotherboard
Source Code: https://github.com/MoltenMotherBoard/platform_device_samsung_msm7x27-common/tree/cm10
ROM OS Version: 4.1.x Jelly Bean
ROM Kernel: Linux 2.6.x
ROM Firmware Required: GB 2.3.6
Based On: AOKP
Version Information
Status: Stable
Current Stable Version: 1
Stable Release Date: 2014-11-17
Created 2014-10-16
Last Updated 2015-08-28
Reserved
Sources here.
Device Sources:
msm7x27-common
device
Download here
AOKP_TASS-[click here to download]
New update(17-11-2014): A new update is posted in attachments which fixes buggy bluetooth. It is mandatory to flash it. A data/factory reset is highly recommended after flashing the bluetooth fix.
There is no keyboard(latinme) included.
Installation procedure is same as cm10. slimbean,cm10 on the way. Uploading now.
I need someone who can resize brightnessbar, circle lockscreen, all lockscreen options. This is far best 4.1 rom for mini. So, i would love some contribution to this rom.
Sent from my GT-S5570 using XDA Free mobile app
Use gapps this way:
1. Install gapps
2. Install playservices from a previous backup.
3. Freeze google apks like playservices, backup transport, contact sync, network location, picasa uploader etc except "playstore, google account manager, market update and google services framework" (basically freeze every google apk except these)
4. Add google a/c and use playstore normally.
5. If you don't have a playservices backup, let market download it and freeze after that.
Sent from my GT-S5570 using XDA Free mobile app
Updated Thread. Please do read thread carefully before asking/posting/reporting anything. Thank you.
When you are want to release next version
Anyone there to resize brightness bar and lockscreen options? @magmini, are you free? Can you help me?
Sent from my GT-S5570 using XDA Free mobile app
USB debugging mode and ringtones
Hi!
I have to problems.
1. Where can turn on the USB debugging mode, under which menu point?
2. I cannot see the ringing tones, where are there?
Atrasko said:
Hi!
I have to problems.
1. Where can turn on the USB debugging mode, under which menu point?
2. I cannot see the ringing tones, where are there?
Click to expand...
Click to collapse
Hi Venkatesh,
I've found the USB debugging mode, OK. no problem.
But the sounds not OK. In the 'Default notification' menu I can find only one option "silent" !
Does it means, there is no sound for notification?
Could you help me?
Atrasko
notifications sounds
Atrasko said:
Hi Venkatesh,
I've found the USB debugging mode, OK. no problem.
But the sounds not OK. In the 'Default notification' menu I can find only one option "silent" !
Does it means, there is no sound for notification?
Could you help me?
Atrasko
Click to expand...
Click to collapse
I've got the solution. I couldn't be so stupid. My "Notifications" directory on the SD card was empty.
I put some ogg files in it, and now the notifications sound are available.
Sorry to disturb you.
Atrasko said:
I've got the solution. I couldn't be so stupid. My "Notifications" directory on the SD card was empty.
I put some ogg files in it, and now the notifications sound are available.
Sorry to disturb you.
Click to expand...
Click to collapse
It was my mistake. My makefile failed to copy ringtones to system/media.
Sent from my GT-S5570 using XDA Free mobile app
resized lockscreen is present in A_U's or Rohan's build i think
vishalthedevil005 said:
resized lockscreen is present in A_U's or Rohan's build i think
Click to expand...
Click to collapse
Slimbean and aokp has too many lockscreen options than cm10. I am talking about those new lockscreen options resize(bubble, circle,blackberry lockscreen options ).
Sent from my GT-S5570 using XDA Free mobile app
Hey guys, I want to apply for recognized contributor, what do you all say? Am i good enough for it? Hope, i am helpful to you all this while. Waiting for your answers. Thank you.
you are indeed an eligible candidate according to me. keep up the good work.
Hi
How can I install a keyboard?
Thank u for this good work
betty_kr said:
Hi
How can I install a keyboard?
Thank u for this good work
Click to expand...
Click to collapse
Download any keyboard app to pc, copy it to sd card and install it. I use samsung keyboard flashable zip(search galaxy mini themes section).
Sent from my GT-S5570 using XDA Free mobile app
I've been using this rom from past 20 days..
Here are my opinions,problems etc..
Firstly i'd like to thank you for this rom.
I had odexed this rom(to get some some free space).
But i had problem everytime i used "usb mass storage". every time the phone gets into hot reboot(i'm also using xperia theme).
And once when this happened,phone didn't boot back only. This logcat might be helpful for you.
I tired everything,but i had to "data reset" my phone:crying:
Hi guys!
I'm on stock 5.1 and I miss only on feature from cm based rom: smart pull down notification (if there aren't any notification, pulling down is opening the toggles ; if there are notifications, pulling down is opening the notifications).
This option used to be available on gravity box for kitkat, but not in lollipop.. Is there a way or an additional module to obtain this feature?
Thanks a lot!!
Check out the app LMT PIE. Amongst many other very useful things, it has what the dev calls "invisible swipe areas." I use one in the center to to fully open the notification drawer. You can set one on the top right to open the quick controls. It's not exactly what you describe, but you can always get the view you want just by pulling down from the preselected area.
There is an option under QuickSettings management in GravityBox to pull down the toggles using the right or left edge of the notification bar. It doesn't work exactly like smart pulldown but it's a decent work-around.
thanks guys
but i really like to have smart pull down.. i think i'll have to try back cm12.1!