Database Develop

[Q] Help with Bell Samsung i9000m

Just bought a samsung galaxy s gt i9000m phone and so far I have done the 1 click root on it and installed rom manager , busybox and titanium backup. I have flashed the Clockworkmod recovery to the phone and looking to update my firmware to 2.2 if I'm able to.
Right now I am running firmware 2.1-update1 from bell and kernel version 2.6.29 darae.ahn Sep-20 #2 . Build Eclair UGJH2
I can get into recovery and download modes without a problem , would anyone mind letting me know what my options are for froyo 2.2 with this bell phone? Thanks alot in advance , looking forward to any replies and help with my questions.

stevenca said:
Just bought a samsung galaxy s gt i9000m phone and so far I have done the 1 click root on it and installed rom manager , busybox and titanium backup. I have flashed the Clockworkmod recovery to the phone and looking to update my firmware to 2.2 if I'm able to.
Right now I am running firmware 2.1-update1 from bell and kernel version 2.6.29 darae.ahn Sep-20 #2 . Build Eclair UGJH2
I can get into recovery and download modes without a problem , would anyone mind letting me know what my options are for froyo 2.2 with this bell phone? Thanks alot in advance , looking forward to any replies and help with my questions.
Click to expand...
Click to collapse
Try the Doc/Kalpik rom. I'm running version 6. Simple to install, with no issues (for me anyways)

Xwjpa v7.6.2
Can I put this on my bell galaxy s ?
Choices are ..:: Current Releases ::..
XWJPA: V7.6.2
XXJPO: V7.6.2
I can't tell which would be better for my bell canada galaxy s gt-i9000m , any help appreciated !

I'm also running version 6 and it is awesome.
None of these roms were designed for the Bell phone so pick whichever one you want. There is a link on Docs first page that may help you decide which version to install. I have used a few of Docs roms and they all worked great on my m.
Sent from a Bell I9000m running Froyo.

Thx guys , did alot of reading and in the end I installed Docs XXJPO 7.6.2 on my bell samsung galaxy s gt-i9000m and its working great !! Only problem I have is it will not accept the lagfix that was reccommended in the read me , hoping someone can answer why to that , otherwise , great to be 2.2 !

Honestly, try it for a while without lagfix. I haven't used one and I notice no lag at all.

I already applied it , to be honest I wasn't seeing the lag but I wanted to get it over with rather than 3 days from now be on here asking about it. I am going to go thru the readme now to see some of the other goodies that were there to choose from and hopefully be done messing on the phone for a while ! I bricked my first galaxy s this week so being cautious with everything now !!!

[Q] Which is the best rom?

Guys.....i live in the middle east..precisely UAE....i bought my SGS about 8 months ago in october.....i had 2.1....in december i upgraded it to 2.2 via kies........the market dint work for me at that time, but i have a few friends who bought the i9003 and the market works....apparently i have to upgrade the firmware to 2.2.1 for the market to work......now i jz wanna know which is the best rom out there for my region and if any1 wud be kind enough to direct me on how the rooting and flashing can be done, i will really appreciate it......i tried searching here but i get lost in the forums....too many ppl saying different things, which i tried once and it dint work......so if any1 can help me i will really appreciate it!
Baseband Version: I9000JXJPE
Kernal Version: 2.6.32.9 [email protected] #91
Build Number: FROYO.JPJPG

From what I see the only official release after your I9000JPJPG 2.2 is this -I9000JPJPM 2.2.1 http://hotfile.com/dl/113881486/83d6b01/I9000JPJPM.rar.html

[Q] Does 2.3.4 GB works for I9000T??

i want to upgrade my firmware but im not sure if 2.3.4 supports I9000T (latinamerica version of I9000) if anyone knows plz confirm me.
Additional information:
i readed in this post that 2.3.3 is fully working but i want 2.3.4 if possible.
http://forum.xda-developers.com/showthread.php?t=1103677

321C said:
i want to upgrade my firmware but im not sure if 2.3.4 supports I9000T (latinamerica version of I9000) if anyone knows plz confirm me.
Additional information:
i readed in this post that 2.3.3 is fully working but i want 2.3.4 if possible.
http://forum.xda-developers.com/showthread.php?t=1103677
Click to expand...
Click to collapse
Yes, just make sure you flash a 850 modem, latest is ubjv6

Firmware - newbie help

Hi all,
I am wondering if someone can guide me to the correct direction.
This is my phone (samsung Galaxy I9000)
Model GT-I9000
Firmware: 2.1-Update 1
Base Version: I9000 DTJG3
Kernel 2.6.29 [email protected]#2
Build Number: ECLAIR. DTJG4
It is unlocked - orginally from Optus.
this phone feels very slow and not very responsive at the moment.
I am thinking of upgrading the firmware hoping that it will improve the persformance
Can someone please tell me which firmware will be best for me? I'm not going to root the phone and I am just after most effecient firmware (good wifi, GPS and signal)
I am not sure which one is most stable for my phone.
Thank you

you could flash a stock gingerbread rom.the ones with bootloaders.jvh is pretty stable.2.3.4 ones will have phone fc bug..you'll hv to root ur phone to get rid of that bug..stock roms u can dwnld from ramads thread..for gps/wifi/signal u will have to flash the appropriate modem.there was a thread comparing modems somewhere here on the forum.try searching it.if u really want near zero lags it would be best to do ext4 lagfix..but again rooting will be reqd.gb roms are fast without these but lagfix still brings noticeable change.

Thank you for the reply.
It seems that I am gonna need to do root on it.
If that is the case, It will be much appreciated if I can be pointed to the correct link (tutorial - step by step) to get this process.
After reading some of the psosts I get really confused with all the type of firmware and kernel etc...
any suggestions and links I can follow will be much a great help much appreciated
Thank you again

The below links helped me out.
http://www.theandroidsoul.com/xxjvp-android-2-3-4-firmware-galaxy-s-install-and-download/
http://www.theandroidsoul.com/root-xxjvp-firmware/
Read the tutorials carefully, then read them again and again until you are sure and confident. do not use if you dont feel confident.

Make sure you have the 3 button combo (recovery and download).

You should be able to update to gingerbread via Kies JVN 2.3.3 -optus

Drift spunk said:
You should be able to update to gingerbread via Kies JVN 2.3.3 -optus
Click to expand...
Click to collapse
Thank you - updating now

You got proper internet connection?If yes then kies will diffinetly show either This is the latest firmware or there is an update available.
Sent from my GT-I9000 using XDA App

ardabelati said:
Thank you - updating now
Click to expand...
Click to collapse
Nice I'm on 2.3.4 jvr with jvn csc and jv1 modem and its the best combo and I have flashed every rom, samsung and miui
Sent from my GT-I9000 using XDA App

Hello, you can try JPY on 2.2.1, it's a stable firmware without the bugs of the gingerbread, if you doesn't want to root your phone.

Thanks for all the replies guys,
I just upgraded to GingerBread 2.3.3 XWjVN.
My next question is:
If I want to get rid of all those Optus rubish - Can you please tell me which firmware do I need to install?
There are so many types and I really get confused which one is going to work for me.
I have seen my friend's SI9000 very fast and snapy - is the firmware upgrade the way to do it?
Thanks again guys

Flash any custom roms from here CUSTOM ROMS

[Q] frustraded!!!

I have a friend with a i9000t and he wants his cell running with a ics rom. like my sgs4g that is running with cm9.. i have tried everything but for some kind of reason in this phone its not so that simple to do than in my sgs4g...
His phone is running in
2.1update firmware version
my csc with gingerbread its tuwajv4
but right now i am in tubjh1
and my kernell version its
2.6.29
i have read a lot but i cant do what he ask me for please help

mnatal said:
I have a friend with a i9000t and he wants his cell running with a ics rom. like my sgs4g that is running with cm9.. i have tried everything but for some kind of reason in this phone its not so that simple to do than in my sgs4g...
His phone is running in
2.1update firmware version
my csc with gingerbread its tuwajv4
but right now i am in tubjh1
and my kernell version its
2.6.29
i have read a lot but i cant do what he ask me for please help
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1852546
if i understood you correctly this might help you