I'm using some guys guide for mac users:
1. Take a deep breath. It is just software and you are going to master it!
2. Download and install the Mac OSX Android SDK. I am going to assume for the purposes of this list that you have put it in /Applications/android-sdk-mac_86/tools/ but it doesn't matter.
3. Get fastboot-mac from here. Rename it 'fastboot' and put it in /Applications/android-sdk-mac_86/tools/.
4. Get Radio_20100203_2_Signed_PASSION.img,
update-cm-5.0.4.1-N1-signed.zip AND gapps-passion-ERE36B-2-signed.zip
from here and put them in /Applications/android-sdk-mac_86/tools/.
5. Get recovery-RA-nexus-v1.6.2.img from here and put it in /Applications/android-sdk-mac_86/tools/
6. Put Get Radio_20100203_2_Signed_PASSION.img,
update-cm-5.0.4.1-N1-signed.zip and gapps-passion-ERE36B-2-signed.zip
on the root of the SD card. You can do this by mounting the phone via a USB cable (this works just like any USB stick except you have to click a button on the phone's UI).
7. In your phone settings > applications > development, set usb
debugging to enabled.
8. Turn off your phone and put the SD card with the 3 files on it
into your phone.
9. Hook up the USB connection to your phone and your mac.
10. Reboot phone into fastboot: Hold down trackball, push the power
button and hold both until you see the fastboot screen. (The fastboot
screen is the one with the Androids on skateboards)
11. In Terminal on your mac, cd to /Applications/android-sdk_mac_86/tools
12. Type ‘./fastboot devices‘ to make sure your phone is recognized
(it should list a device number rather than simply returning to
command prompt with no feedback).
13. Type ‘./fastboot oem unlock‘ to unlock the bootloader (wohoo, your phone is now rooted!)
14. Use volume keys on the phone to navigate to yes and press the
power button to confirm.
15. When the phone finishes booting, in your phone settings >
applications > development, set usb debugging to enabled, then power
it down.
16. Reboot phone into fastboot: Hold down trackball, push the power
button and hold both until you see the fastboot screen. (The fastboot
screen is the one with the Androids on skateboards)
17. (you're still in terminal in /Applications/android-sdk_mac_86/tools)
Type ‘./fastboot flash recovery ./recovery-RA-nexus-v1.6.2.img‘. (Note
filename will change as recovery image is updated)
18. Type './fastboot flash radio ./Radio_20100203_2_Signed_PASSION.img'
to also update your radio at this point
19. Once the Recovery flash is complete (should be almost instant),
press the Power Button. The highlighted blue text should now say
HBOOT. Use the volume down button to highlight "Recovery" and hit the
power button to reboot into recovery.
20. if this step fails, power down the phone, and try this: hold down
the VOLUME DOWN button and then hold the POWER button until you get to
the skateboard screen; use volume down to highlight RECOVERY and hit
the POWER button
21. You should now be in the Recovery screen after a reboot -- this
screen has 9 green text options at the top and an android x in the
center of the screen
22. Once in Recovery Mode, use the trackball to scroll down to
"Backup/Restore" and press the trackball three times, and wait until
the backup is complete.
23. Once backup is complete, wipe, since you're coming from stock
(even fastboot oem unlock may not fully wipe, do it just in case) many
users report the phone not booting properly without a wipe at this
point.
24. Scroll down to "Flash zip from sdcard", and press the trackball.
25. Select the CyanogenMod update (update-cm-5.0.4.1-N1-signed.zip),
and press the trackball again to confirm. Wait until the flash is
complete. (Note: this will take a little while).
26. Once again, Scroll down to "Flash zip from sdcard", and press the trackball.
27. This time, select the Google Apps File
(gapps-passion-ERE36B-2-signed.zip), and press the trackball again to
confirm. Wait until the flash is complete.
28. Once you are back in the main menu, press the trackball select the
first option (Reboot system now) and reboot the phone.
29. If everything was done correctly, the phone should boot into CyanogenMod!
Click to expand...
Click to collapse
My few questions...
Do I really need SDK? I've been reading a lot, and some say use it, some don't mention it.
I've already found that some of his files are updated, so I'd be using the more recent ones.
Also, I'm thinking that I'm NOT going to mess with the radio. I don't have to, right?
ETA: And then I see that his post says nothing about superboot. Am I supposed to do both? Fastboot and then superboot?
And then another question... I plan on getting a 16gb class 6 sd card. Should I wait to do this until I get that? Will I have to do it all over again?
Thanks!!
I am by no means a pro at this, but to answer a a question or 2 of yours...
I never bothered using the SDK. I did download it, but like you, I followed other instructions that did not tell you to use the SDK.
The important part is to put all the downloaded files into your renamed "fastboot" folder, where fastboot will know where to look for it.
Concerning the radio, some ROMS may or may not require different radios, but for the simple process of rooting your phone, I'm pretty sure you're cool.
I used fastboot, but superboot (if I understand it correctly) is a total tool for your use. Someone correct me if I'm wrong, but I believe it takes the place of all the steps you listed above, and does it all in one command.
Good luck! Its easy, and it sounds like you have all the tools you need!
1) I didn't flash a new radio when I rooted mine (didn't for a couple of weeks until I was comfortable with flashing and abd and stuff). The radio is evidently the greatest risk of bricking the phone.
2) I've typically seen "superboot" to refer to a rom image that modaco hosts that includes the superuser perms and apk and not as a tool (as fastboot is referred to). ymmv.
thnxs to sk806,(go and thank him first)
First, you need to root your device. Download the link from this post: http://forum.xda-developers.com/showpost.php?p=21584547&postcount=1.
Put the file "root.zip" you just downloaded onto your EXTERNAL SDcard.
Then, power off the device.
When it's off (it'll buzz), press the volume up key (the one closer the power button) and the power key at the same time.
After a few seconds, the "Galaxy Tab 7.7" splash screen will come up. When it does, LET GO OF THE POWER BUTTON, BUT KEEP HOLDING THE VOLUME UP BUTTON.
Soon you will see some yellow writing on your screen saying the device is copying apks, etc. What is happening is you are booting into the tablet's stock recovery. After a bit, the yellow writing will go away, and then you will arrive at a blue menu.
Using the volume keys, select "install from external storage", then press the power button. You will arrive at a menu of your sd card.
Using the volume keys, select "root.zip" and press the power button.
You will again see some yellow writing and your device will be rooted.
After it's done, reboot the device by selecting reboot and pressing power (it may reboot automatically, I can't remember). You are now rooted!
Now that you are rooted, you need to flash the ported Clockwork Mod Recovery for this tablet onto your device. This is a custom recovery that will replace the stock one you saw before and allow you to flash custom ROMs...You can download the recovery .tar file in this post: http://forum.xda-developers.com/showpost.php?p=21957277&postcount=1.
You can flash the file your just downloaded, "P6800_Recovery.tar" one of two ways: with an app on the market called "Mobile ODIN", it costs a few dollars, or you can download a windows desktop version of ODIN here: http://forum.xda-developers.com/showpost.php?p=19760431&postcount=1. THE MOBILE ODIN METHOD IS MUCH EASIER, AND I HIGHLY RECOMMEND IT!!! If you choose to use Mobile Odin, proceed to the next step and skip steps 14-20, below. If you decide to go the desktop way, skip ahead to step 14.
If you are using Mobile Odin, you just copy the "P6800_Recovery.tar" file to your internal or external storage. Then open Open Mobile Odin. You will see a menu. Toward the bottom, you will see an option to "Open file". Select this and then navigate to the "P6800_Recovery.tar" it will load it up (you will see it in the "recovery" slot). Then hit "Flash Firmware". Wait while it does it's thing, and it will reboot automatically. When it reboots, you have successfully flashed Clockwork Mod Recovery onto your device.
If you use the desktop version, you need to first install Samsung Kies (Google it) to get the proper drivers for you PC to recognize your tablet when plugged in via USB.
Then, copy "P6800_Recovery.tar" to your PC desktop.
Then, you need to unzip the ODIN 1.85.zip you downloaded from the link above onto your desktop, go into the unzipped ODIN folder and run the Odin 1.85.exe.
You will be shown a GUI with a list of buttons on the lower right side (PIT, Recovery, CSC, PDA, Phone, etc.). You want to click the button that says "PDA" and then, in the file selector, choose the "P6800_Recovery.tar" file.
Next you need to put your phone in "download" mode. To do this, power off the device. When it's off, press the VOLUME DOWN and power keys at the same time. When you see the "Galaxy Tab 7.7" splash screen, let go of the power button, but keep holding the volume down button (so, it's like booting into recovery, but with the volume down button, instead).
You will then be shown a caution prompt asking if you really want to enter download mode, hit the volume up key to select yes. Now, plug the tablet into the USB cable that came with your tablet and wait for windows to install the drivers (as noted above, this is why you installed Kies). You will know your device is properly connected when one of the windows in the upper left of the GUI has a yellow bar at the bottom of it and says COM:3 or whatever port you are on.
When you are sure your are connected, click the big Start button and it will go through the process, and your tablet will reboot automatically. You now have Clockwork Mod Recovery flashed to your tablet.
Once you have Clocwork Mod Recovery Flashed onto your device, the last step is to flash the custom ROM.
Download ROM zip file from the thread, then place it somewhere on the internal or external storage of your device, then power off.
Once your device is off, you will boot into recovery like you did above, press the volume up and power keys at the same time, and when you see the "Galaxy Tab 7.7" splash screen. let go of the power button, but hold the volume up key until you boot into clockwork mod recovery (you will see a blue menu again with a little logo of a hat on a gear.
As you will see, this is a different recovery from the one you booted into before, it is a custom recovery that will allow you to flash custom ROMs!
Using the volume keys and selecting with the power key, first perform "wipe data/factory reset". When that's done, perform "wipe cache partition".
When you have done these two wipes, select "Install zip from sdcard". You will then be shown a list of your sdcard's contents. Navigate to the ROM .zip file and press the power key. It will then ask you if you are sure, and select yes then press the power key. You will now see a little progress bar and a description of what is happening. It takes a while and your device will reboot automatically when it's finished.
That's it, you have a custom ROM on your tab!
***HIT THE THANKS BUTTON IF YOU FOUND THIS POST HELPFUL~***
Click to expand...
Click to collapse
Thanks for your work...
It would be nice if you could make the tutorial with picture and numerical steps.
Good tut love the afford. Some ppl could really use that.
(Edit) tnx goes to steve and you for posting
Verstuurd van mijn GT-P6800 met Tapatalk
Made it a little easier to read/follow for ya.
haidharbbc said:
thnxs to sk806,(go and thank him first)
OK, here you go:
First, you need to root your device.
Download the link from this post: http://forum.xda-developers.com/showpost.php?p=21584547&postcount=1
Put the file "root.zip" you just downloaded onto your EXTERNAL SDcard.
Then, power off the device.
When it's off (it'll buzz), press the volume up key (the one closer the power button) and the power key at the same time. After a few seconds, the "Galaxy Tab 7.7" splash screen will come up. When it does, LET GO OF THE POWER BUTTON, BUT KEEP HOLDING THE VOLUME UP BUTTON. Soon you will see some yellow writing on your screen saying the device is copying apks, etc. What is happening is you are booting into the tablet's stock recovery. After a bit, the yellow writing will go away, and then you will arrive at a blue menu.
Using the volume keys, select "install from external storage", then press the power button. You will arrive at a menu of your sd card.
Using the volume keys, select "root.zip" and press the power button. You will again see some yellow writing and your device will be rooted. After it's done, reboot the device by selecting reboot and pressing power (it may reboot automatically, I can't remember). You are now rooted!
Now that you are rooted, you need to flash the ported Clockwork Mod Recovery for this tablet onto your device. This is a custom recovery that will replace the stock one you saw before and allow you to flash custom ROMs...You can download the recovery .tar file in this post: http://forum.xda-developers.com/showpost.php?p=21957277&postcount=1
You can flash the file your just downloaded, "P6800_Recovery.tar" one of two ways: with an app on the market called "Mobile ODIN", it costs a few dollars, or you can download a windows desktop version of ODIN here:.http://forum.xda-developers.com/showpost.php?p=19760431&postcount=1
THE MOBILE ODIN METHOD IS MUCH EASIER, AND I HIGHLY RECOMMEND IT!!! If you choose to use Mobile Odin, proceed to the next step and skip steps 14-20 (in italics), below. If you decide to go the desktop way, skip ahead to step 14.
If you are using Mobile Odin, you just copy the "P6800_Recovery.tar" file to your internal or external storage. Then open Open Mobile Odin. You will see a menu. Toward the bottom, you will see an option to "Open file". Select this and then navigate to the "P6800_Recovery.tar" it will load it up (you will see it in the "recovery" slot). Then hit "Flash Firmware". Wait while it does it's thing, and it will reboot automatically. When it reboots, you have successfully flashed Clockwork Mod Recovery onto your device.
If you use the desktop version, you need to first install Samsung Kies (Google it) to get the proper drivers for you PC to recognize your tablet when plugged in via USB. Then, copy "P6800_Recovery.tar" to your PC desktop. Then, you need to unzip the ODIN 1.85.zip you downloaded from the link above onto your desktop, go into the unzipped ODIN folder and run the Odin 1.85.exe. You will be shown a GUI with a list of buttons on the lower right side (PIT, Recovery, CSC, PDA, Phone, etc.).
You want to click the button that says "Recovery" and then, in the file selector, choose the "P6800_Recovery.tar" file.
Next you need to put your phone in "download" mode. To do this, power off the device. When it's off, press the VOLUME DOWN and power keys at the same time. When you see the "Galaxy Tab 7.7" splash screen, let go of the power button, but keep holding the volume down button (so, it's like booting into recovery, but with the volume down button, instead).
You will then be shown a caution prompt asking if you really want to enter download mode, hit the volume up key to select yes. Now, plug the tablet into the USB cable that came with your tablet and wait for windows to install the drivers (as noted above, this is why you installed Kies). You will know your device is properly connected when one of the windows in the upper left of the GUI has a yellow bar at the bottom of it and says COM:3 or whatever port you are on.
When you are sure your are connected, click the big Start button and it will go through the process, and your tablet will reboot automatically. You now have Clockwork Mod Recovery flashed to your tablet.
Once you have Clocwork Mod Recovery Flashed onto your device, the last step is to flash the custom ROM.
Download ROM zip file from the thread, then place it somewhere on the internal or external storage of your device, then power off.
Once your device is off, you will boot into recovery like you did above, press the volume up and power keys at the same time, and when you see the "Galaxy Tab 7.7" splash screen. let go of the power button, but hold the volume up key until you boot into clockwork mod recovery (you will see a blue menu again with a little logo of a hat on a gear.
As you will see, this is a different recovery from the one you booted into before, it is a custom recovery that will allow you to flash custom ROMs!
Using the volume keys and selecting with the power key, first perform "wipe data/factory reset". When that's done, perform "wipe cache partition".
When you have done these two wipes, select "Install zip from sdcard".
You will then be shown a list of your sdcard's contents. Navigate to the ROM .zip file and press the power key. It will then ask you if you are sure, and select yes then press the power key. You will now see a little progress bar and a description of what is happening. It takes a while and your device will reboot automatically when it's finished.
That's it, you have a custom ROM on your tab!
Click to expand...
Click to collapse
thnxs for updating it to easier to read for others
Sent from my GT-P6800 using xda premium
Hi!
The ODIN Mobile which I have use to install the Recover, then can I remove it because think about not use it any more???
thx, much appriciated, will try later
2 questions
a why is it necesarry to use clockword recovery ?
i flashed this stock tweaked rom in stock recovery without any problems
http://forum.xda-developers.com/showthread.php?t=1520888
b. is it possible to remove clockwork recovery in case of ...., go back to the old stock recovery of Samsung ?
Original Post
This is the tutorial as I wrote it...I suggest you edit the OP with this, or the version above. If you hit the "Quote" button below, you can copy the properly formatted text from the reply window (it will start with [QUOTE: blah blah], have "[*]" instead of numbers, and end with [QUOTE/]), and then copy and paste to your OP. Thanks.
Steve
First, you need to root your device. Download the link from this post: http://forum.xda-developers.com/showpost.php?p=21584547&postcount=1.
Put the file "root.zip" you just downloaded onto your EXTERNAL SDcard.
Then, power off the device.
When it's off (it'll buzz), press the volume up key (the one closer the power button) and the power key at the same time.
After a few seconds, the "Galaxy Tab 7.7" splash screen will come up. When it does, LET GO OF THE POWER BUTTON, BUT KEEP HOLDING THE VOLUME UP BUTTON.
Soon you will see some yellow writing on your screen saying the device is copying apks, etc. What is happening is you are booting into the tablet's stock recovery. After a bit, the yellow writing will go away, and then you will arrive at a blue menu.
Using the volume keys, select "install from external storage", then press the power button. You will arrive at a menu of your sd card.
Using the volume keys, select "root.zip" and press the power button.
You will again see some yellow writing and your device will be rooted.
After it's done, reboot the device by selecting reboot and pressing power (it may reboot automatically, I can't remember). You are now rooted!
Now that you are rooted, you need to flash the ported Clockwork Mod Recovery for this tablet onto your device. This is a custom recovery that will replace the stock one you saw before and allow you to flash custom ROMs...You can download the recovery .tar file in this post: http://forum.xda-developers.com/showpost.php?p=21957277&postcount=1.
You can flash the file your just downloaded, "P6800_Recovery.tar" one of two ways: with an app on the market called "Mobile ODIN", it costs a few dollars, or you can download a windows desktop version of ODIN here: http://forum.xda-developers.com/showpost.php?p=19760431&postcount=1. THE MOBILE ODIN METHOD IS MUCH EASIER, AND I HIGHLY RECOMMEND IT!!! If you choose to use Mobile Odin, proceed to the next step and skip steps 14-20, below. If you decide to go the desktop way, skip ahead to step 14.
If you are using Mobile Odin, you just copy the "P6800_Recovery.tar" file to your internal or external storage. Then open Open Mobile Odin. You will see a menu. Toward the bottom, you will see an option to "Open file". Select this and then navigate to the "P6800_Recovery.tar" it will load it up (you will see it in the "recovery" slot). Then hit "Flash Firmware". Wait while it does it's thing, and it will reboot automatically. When it reboots, you have successfully flashed Clockwork Mod Recovery onto your device.
If you use the desktop version, you need to first install Samsung Kies (Google it) to get the proper drivers for you PC to recognize your tablet when plugged in via USB.
Then, copy "P6800_Recovery.tar" to your PC desktop.
Then, you need to unzip the ODIN 1.85.zip you downloaded from the link above onto your desktop, go into the unzipped ODIN folder and run the Odin 1.85.exe.
You will be shown a GUI with a list of buttons on the lower right side (PIT, Recovery, CSC, PDA, Phone, etc.). You want to click the button that says "Recovery" and then, in the file selector, choose the "P6800_Recovery.tar" file.
Next you need to put your phone in "download" mode. To do this, power off the device. When it's off, press the VOLUME DOWN and power keys at the same time. When you see the "Galaxy Tab 7.7" splash screen, let go of the power button, but keep holding the volume down button (so, it's like booting into recovery, but with the volume down button, instead).
You will then be shown a caution prompt asking if you really want to enter download mode, hit the volume up key to select yes. Now, plug the tablet into the USB cable that came with your tablet and wait for windows to install the drivers (as noted above, this is why you installed Kies). You will know your device is properly connected when one of the windows in the upper left of the GUI has a yellow bar at the bottom of it and says COM:3 or whatever port you are on.
When you are sure your are connected, click the big Start button and it will go through the process, and your tablet will reboot automatically. You now have Clockwork Mod Recovery flashed to your tablet.
Once you have Clocwork Mod Recovery Flashed onto your device, the last step is to flash the custom ROM.
Download ROM zip file from the thread, then place it somewhere on the internal or external storage of your device, then power off.
Once your device is off, you will boot into recovery like you did above, press the volume up and power keys at the same time, and when you see the "Galaxy Tab 7.7" splash screen. let go of the power button, but hold the volume up key until you boot into clockwork mod recovery (you will see a blue menu again with a little logo of a hat on a gear.
As you will see, this is a different recovery from the one you booted into before, it is a custom recovery that will allow you to flash custom ROMs!
Using the volume keys and selecting with the power key, first perform "wipe data/factory reset". When that's done, perform "wipe cache partition".
When you have done these two wipes, select "Install zip from sdcard". You will then be shown a list of your sdcard's contents. Navigate to the ROM .zip file and press the power key. It will then ask you if you are sure, and select yes then press the power key. You will now see a little progress bar and a description of what is happening. It takes a while and your device will reboot automatically when it's finished.
That's it, you have a custom ROM on your tab!
yes..you can remove it after u install it..but just save it for later purpose my opinion
Sent from my GT-P6800 using xda premium
yarda,
i can't really answer for your 1st question..maybe steve dan help you..
for the 2nd question, i think by flashing the stock firmware and factory reset will do the trick
Sent from my GT-P6800 using xda premium
flashed clockword with odin mobile, it's easy
just follow the steps
now i'm capable to make a nandroid backup before flashing some other stuff
ok..thnxs for the feedback
Sent from my GT-P6800 using xda premium
Yarda said:
thx, much appriciated, will try later
2 questions
a why is it necesarry to use clockword recovery ?
i flashed this stock tweaked rom in stock recovery without any problems
http://forum.xda-developers.com/showthread.php?t=1520888
b. is it possible to remove clockwork recovery in case of ...., go back to the old stock recovery of Samsung ?
Click to expand...
Click to collapse
first question:
Why you can flash this ROM with your stock recovery, i look inside the script steve made and found that
-script mounting and unmounting /data and /system partition
-deleting file system from /data and /system partition
-moving file from zip to /system and /data partition
-making busybox symlinks
-installing kernel
-set some permission
All above process is support with edify script from stock recovery...( until now, i dont know if samsung lock it someday) thats why you can install steve ROM...
suwandiapr said:
first question:
Why you can flash this ROM with your stock recovery, i look inside the script steve made and found that
-script mounting and unmounting /data and /system partition
-deleting file system from /data and /system partition
-moving file from zip to /system and /data partition
-making busybox symlinks
-installing kernel
-set some permission
All above process is support with edify script from stock recovery...( until now, i dont know if samsung lock it someday) thats why you can install steve ROM...
Click to expand...
Click to collapse
This is correct. The tutorial was for all custom ROMs to come, not just my tweaked stock one. The fact that you can flash my ROM is because it is nothing too exotic (it's stock...) and the bootloader and recovery on the tab is not locked down. These things may change, and it is better to have the CWM recovery for that reason AND, especially, as noted in the post above, you can make NANDROID backups which you really should do before you flash a custom ROM...
Steve
thx for the explanation !
i now use CWM recovery, flashed with Odin mobile
great tut, but my CHINA P6800 will not accept any other ROM install for some reason. Yes, I have a brain and others confirm it's somehow locked. No f-ing idea how; more research after (endless) travel.
sk806 said:
This is correct. The tutorial was for all custom ROMs to come, not just my tweaked stock one. The fact that you can flash my ROM is because it is nothing too exotic (it's stock...) and the bootloader and recovery on the tab is not locked down. These things may change, and it is better to have the CWM recovery for that reason AND, especially, as noted in the post above, you can make NANDROID backups which you really should do before you flash a custom ROM...
Steve
Click to expand...
Click to collapse
This should be included in the tutorial imo.
so in a nutshell, we're bootloader unlocked, I can get my brand new HK galaxy tab 7.7 and root/CWM right away (like my OG tab) without having to do any Bootloader unlock method?
cheers
yes..mine juz straightly rooted..same like most of the others
Sent from my GT-P6800 using xda premium
Thanks Guy