hi,
i want to flash my i9001 with heimdall v1.3.1 (ubuntu 11.10) to the latest stock rom xxkpu. there is only a odin one package containing:
adsp.mbn
amss.mbn
boot.img
cach.img.ext4
preload.img.ext4
recovery.img
system.img.ext4
i also have the s1_odin_20100512.pit file, because i cant download pit file from my device.
Can anybody explain to me how to flash with heimdall, cause i dont know what to do with adsp.mbn for example. heimdall doensn't have a parameter for that like heimdall --kernel for the kernel file.
if i have cwm-recovery on my i9001, can i flash stockroms with update.zip?
Thank you very much for your answers and sry for my english
can anybody please help me?
Hi all,
I have looked and tried to find a way of making the zImage in the cm9 source by the TE4M:
http://forum.xda-developers.com/showthread.php?t=1385153
and read
http://forum.xda-developers.com/showthread.php?t=1495007
and looked at the instructions here:
http://forum.xda-developers.com/showthread.php?t=1473166&highlight=make+zimage&page=18
but can't seem to find zImage in the recommended folder ~cm9/kernel/samsung/p1/arch/arm/boot. I have followed the instructions to get the repo, built the KANG zip file. I need the kernel, but can't see a zImage to flash with Heimdall (or put in a cwm flashable zip) and was going to try using fastboot to flash the boot.img file, but I can't get the Tab into fastboot mode - is there one? I can only get Download mode or Recovery
So what tweaks to the build do I need to do to get a zImage?
Thanks
Guys,
I've installed the Liquid Rom v1, and now would like to move onto a diff rom however
1- I noticed that post installation not all features were installed (Busybox, superuser etc do not appearin programs list yet i have rootaccess)
2- when i try to format cache/dalvik/cahce/battery stats - and install a new rom it says 'installing update" and then gets stuck , and then when i take out the battery and reboot it goes back to Liquidsmooth (which i have installed and want to move on from)
Any help?
abdulmananqureshi said:
Guys,
I've installed the Liquid Rom v1, and now would like to move onto a diff rom however
1- I noticed that post installation not all features were installed (Busybox, superuser etc do not appearin programs list yet i have rootaccess)
2- when i try to format cache/dalvik/cahce/battery stats - and install a new rom it says 'installing update" and then gets stuck , and then when i take out the battery and reboot it goes back to Liquidsmooth (which i have installed and want to move on from)
Any help?
Click to expand...
Click to collapse
Check your root status - try to paste a file into /system folder.
If you cannot do it, you don't have full root. Go back to GB using
PC Odin.
I have root.
How do I move on?
Sent from my GT-N7000 using XDA
abdulmananqureshi said:
I have root.
How do I move on?
Sent from my GT-N7000 using XDA
Click to expand...
Click to collapse
When my SGN was in liquidsmooth, I flash AbyssNotekernel42 through CWM recovery then I reboot into recovery of AbyssNotekernel42 and did a full wipe and flash a GB rom sucessfully.
Ty for that. However I want to move to another lpy from.
Tips?
Sent from my GT-N7000 using XDA
Link to Kernel TAR FIle
Can you please send me a link to Farnco kernel or abysnote kernel TAR file? for use in PC ODIN?
Or let me know how to convert the zimage file in ZIP kernel files to TAr for use in ODIN?
abdulmananqureshi said:
Can you please send me a link to Farnco kernel or abysnote kernel TAR file? for use in PC ODIN?
Or let me know how to convert the zimage file in ZIP kernel files to TAr for use in ODIN?
Click to expand...
Click to collapse
You can use the safe kernel Entropy512 posted in the OP of CM9 thread
Flash it with PC Odin, reboot to recovery manually and flash from there
I am trying to push a kernal using ODIN, however after converting the zimage file to tar using 7zip, my ODIN just does progres from step 03 i.e. <id:0/003> zimage
and i cannot flash using CWM in recovery mode because when i do it says cannt open emmc/sdcard/XY.zip
Any help?
My CWM recovery is corrupted.
I would like to
- go back to a GB based ROM (from an ICS one- Liquidsmooth)
- and go back by using ODIN by flashing a kernel (TAR FILE)
Can anyone
1- Point me to a link for franco kernel or abyskernel tar files (to be used in ODIN)
2 - let me know how we concvert a zimage file (inisde kernel files) to tar for use in ODIN
TY
Download any kernel zip you like, extract zimage, and tar it with 7-Zip.
extract zimage?
I need to zip the zimage as tar using 7zip yes?
I believe zimage file cannot be opeend using 7zip?
i toiok the zimage file from abysnote and zipped it in tar using 7zip.
After connecting phone in download mode to ODIN, and starting flash
ODIN gets stuck at <ID:004>zimage
Any help?
Question
- can i flash a whole ROM using ODIN? will this have a jernel accompanying it? or i have to flash both seperately? ( i want to flash criskelo's ICS rom - i am on liquidsmooth ICS now)
Hi,
I'd like to know something when flashing modem whith Odin.
My GT-I9305 isn't Root so...
I get the <modem.bin> file exctract from my one package carrier's ROM (I9305XXALK5_I9305SFRALK2_I9305AEALK2_HOME.tar.md5)
with 7zip
Can I use this modem (from a 4.1.1 ROM) as if I'm in 4.1.2 (I9305XXBLL5_I9305DBTBLL4_I9305XXBLL5_HOME.tar.md5)
in Odin3 (v3.04), where should I put the <modem.bin> file? Phone,PDA?
The flash counter will be incremented?
What about the OTA or Kies update?
Thx..
Re: [Q]How to Flash <modem.bin> file with Odin?
You need to convert it from a bin file to a. tar file for Odin.
Sent from my GT-I9305 using xda app-developers app
Obagleyfreer said:
You need to convert it from a bin file to a. tar file for Odin.
Sent from my GT-I9305 using xda app-developers app
Click to expand...
Click to collapse
I'd read on that post
[Q] How can i extract modem driver from official firmware
we can flash a .bin file with Odin..
...and flash via Odin using the "Phone" entry, not "PDA".
Click to expand...
Click to collapse
Warring of an other thread I'd read (but can't find again ) about Phone and PDA entry..
Hi all,
So any idea?
kanzi83 said:
Hi all,
So any idea?
Click to expand...
Click to collapse
Hello kanzi83, I'm new in the forums but I decided to register so I could help you.
I had the exact same problem and came with a solution, after reading yewsiong's instructions on his post:
http://forum.xda-developers.com/showthread.php?t=1658809
Modifying them so they match your situation, you have to do the following:
1. Install Cygwin and start the Cygwin terminal
2. Put the .tar.md5 firmware into C:\baseband
3. In Cygwin, type the following commands (pressing enter after each line):
Code:
cd /cygdrive/c/baseband
tar -xvf firmware_name.tar.md5 modem.bin
tar -H ustar -c modem.bin > baseband.tar
Example: If the firmware_name.tar.md5 is I8150DXLM3_I8150OLBLD1_I8150DXLM2_HOME.tar.md5
Then the code will be:
Code:
cd /cygdrive/c/baseband
tar -xvf I8150DXLM3_I8150OLBLD1_I8150DXLM2_HOME.tar.md5 modem.bin
tar -H ustar -c modem.bin > baseband.tar
After generating your .tar file, you can use Odin or Odin Mobile (I used Odio Mobile Pro and worked excellent) to flash the Modem.
There you go! Please let me know if you have any questions. Good luck.
kanzi83 said:
Hi all,
So any idea?
Click to expand...
Click to collapse
It's not that hard. Google is your friend.
Please read the following link.
http://forum.xda-developers.com/showthread.php?t=927568
You can just simplely flash modem.bin file via Odin.
Sent from my GT-I9305 using xda app-developers app
Thx for your answers. ..
I'd flash modem.bin file 2 month ago with odin v 3.04 in phone entry and works well
Envoyé depuis mon GT-I9305 avec Tapatalk
Procedure for changing the modem.bin
Hello all,
I am a newbie and want to know to how can I change the modem.bin file of my phone using ODIN...
Kindly help
Try reading this thread answer given in post 6 .
Aldo6 said:
Hello kanzi83, I'm new in the forums but I decided to register so I could help you.
I had the exact same problem and came with a solution, after reading yewsiong's instructions on his post:
http://forum.xda-developers.com/showthread.php?t=1658809
Modifying them so they match your situation, you have to do the following:
1. Install Cygwin and start the Cygwin terminal
2. Put the .tar.md5 firmware into C:\baseband
3. In Cygwin, type the following commands (pressing enter after each line):
Code:
cd /cygdrive/c/baseband
tar -xvf firmware_name.tar.md5 modem.bin
tar -H ustar -c modem.bin > baseband.tar
Example: If the firmware_name.tar.md5 is I8150DXLM3_I8150OLBLD1_I8150DXLM2_HOME.tar.md5
Then the code will be:
Code:
cd /cygdrive/c/baseband
tar -xvf I8150DXLM3_I8150OLBLD1_I8150DXLM2_HOME.tar.md5 modem.bin
tar -H ustar -c modem.bin > baseband.tar
After generating your .tar file, you can use Odin or Odin Mobile (I used Odio Mobile Pro and worked excellent) to flash the Modem.
There you go! Please let me know if you have any questions. Good luck.
Click to expand...
Click to collapse
Thank you!
Is this file checked against md5 when flashing with Odin? (Or when tar-ing?)
How to install modem.bin in my galaxy siii having android 4.3
[QUOTE=kanzi83;40365571Would you please let me know step by step guide to install my modem file (modem.bin) into my GT-I9300 using Odin. Your help in this regard will be highly appreciated.
I am very new to Android world. Need help
when I flash modem.bin via phone with odin 3.07
it fails
yasser86 said:
when I flash modem.bin via phone with odin 3.07
it fails
Click to expand...
Click to collapse
zip the file to .tar
Successful flash with Odin 3.10 & I9305
At first got errors when tried to flash modem.tar which I compressed with 7-zip from modem.bin
Odin just stopped at flashing modem.bin, so unplugged USB and cold restart (everything was still working fine with my phone, even the old modem)
Then successfully flashed modem.BIN via ticking it to CP (Phone?)
So... Somehow Odin couldn't flash my compressed .tar file of the modem..
Maybe I did something wrong with the compression
But now I have a working modem from the latest samsung firmware for my country and signal feels much more reliable now and even got a little bit better speedtest results too
How to flash Modem.bin file with Odin
hi,i had read all posts but i did not get any satisfying result,.....the Solution is
you have to select Odin V3.9 .in 3.9 in CP you can flash modem.bin
Regards
[email protected] said:
hi,i had read all posts but i did not get any satisfying result,.....the Solution is
you have to select Odin V3.9 .in 3.9 in CP you can flash modem.bin
Regards
Click to expand...
Click to collapse
Confirmed with Odin3.10. Don't make it too complicated, folks!
mightysween said:
Confirmed with Odin3.10. Don't make it too complicated, folks!
Click to expand...
Click to collapse
Worked for me also. Thanks OP
hello
raonizal said:
zip the file to .tar
Click to expand...
Click to collapse
This works with newer versions of ODIN.