[Q] GNote problem... is this common? - Galaxy Note GT-N7000 Q&A, Help & Troubleshooting

i straight away rooted my Gnote after bought it from the store. so im not sure about the performance b4 root. I can see few problems after rooting e.g. below
1) battery drain very fast
2) RAM utilization very high even though i saw no weird apps running in background (in setting-running application ) @ 450 above over 797Mb
3) sometime the phone became heated
4) if the bat was at 10% and below, the soft touch button became un-functional. need to restart to gain back the soft touch button
below is my ROM info
baseband: n700XXLA4
Kernel Vers: 2.6.35.14- ver.4.2
[email protected] -k50IN
Build no: Gingerbread.XXLA6
Appreciate any of the experts here to give some solution of my problems
Thanks in advance!

No Sir It's Common at all,
You should surely change the rom you are using, and Why are you still on GingerBread 2.3.6 ? You Should switch to ICS for better everything, but do it safely, Here is my Guide :
http://forum.xda-developers.com/showthread.php?t=1685803
Good Luck.

ash50210 said:
i straight away rooted my Gnote after bought it from the store. so im not sure about the performance b4 root. I can see few problems after rooting e.g. below
1) battery drain very fast
2) RAM utilization very high even though i saw no weird apps running in background (in setting-running application ) @ 450 above over 797Mb
3) sometime the phone became heated
4) if the bat was at 10% and below, the soft touch button became un-functional. need to restart to gain back the soft touch button
below is my ROM info
baseband: n700XXLA4
Kernel Vers: 2.6.35.14- ver.4.2
[email protected] -k50IN
Build no: Gingerbread.XXLA6
Appreciate any of the experts here to give some solution of my problems
Thanks in advance!
Click to expand...
Click to collapse
Same thing happened to me. It is common to heat up, it says so in the manual. As far as going to ics you should wait a little bit until things settle down and the roms become more stable. So far the smoothest custom ics rom is rocket rom v3

Stick with Gingerbread
LaCroyx said:
Same thing happened to me. It is common to heat up, it says so in the manual. As far as going to ics you should wait a little bit until things settle down and the roms become more stable. So far the smoothest custom ics rom is rocket rom v3
Click to expand...
Click to collapse
just a heads up, Rocket rom v3 has a unsafe kernel. READ the ops instructions or you will likely end up with a brick

ooo thanks for the replies. so i think let me wait for some better ICS then. but is there any solution for GB for the time being?

Related

Very slow Galaxy S

I have galaxy s since last one year and i love it... However my phone has become very slow these days.. I tried several roms and kernels.. Formatted both internal and external SD cards... But still it is very slow... I remember that I dropped it 3-4 times... Is it because of it?
Can someone suggest me please... What should I do...
Sent from my Galaxy S using Tapatalk
Maybe over clock it ...? I thought the new ROMs would have helped. It could be the fact that your phone is older now and some internal hardware has been worn out
Nexus S (GSM i9020a)
CM9 Nightly Kang (Build 5 of 2.1)
Eugene's Kernel (Speedy-7)
OC 1100/100 (lulzactivev2)
309041291a said:
Maybe over clock it ...? I thought the new ROMs would have helped. It could be the fact that your phone is older now and some internal hardware has been worn out
Nexus S (GSM i9020a)
CM9 Nightly Kang (Build 5 of 2.1)
Eugene's Kernel (Speedy-7)
OC 1100/100 (lulzactivev2)
Click to expand...
Click to collapse
Can I do anything related to the hardware? I mean how can i check if it is not giving 100%?
Sent from my Galaxy S using Tapatalk
I'm no expert so I'm not sure. Best bet would be to replace the hardware which Costs a ton of money. Its better to just a get a new phone. Either that or maybe mess around with new ROMs some more. Maybe you are wiping your phone incorrectly or maybe you use it too much
Nexus S (GSM i9020a)
CM9 Nightly Kang (Build 5 of 2.1)
Eugene's Kernel (Speedy-7)
OC 1100/100 (lulzactivev2)
my suggest...
1. update your firmware to last version (2.3.6).
2. try to change kernel and custom rom.
3. maybe, with some different kernel and custom rom, you can choice the better option for your device. for example, try using kernel semaphore (gingerbread) and custom rom F1 or other.
I would be very surprised if physical trauma has simply caused a slow-down in speed. It would more likely show itself as random reboots and other more obvious symptoms.
Much like Windows, after a lot of use, it slows down - you have said that you've flashed other roms, maybe you just haven't come across a good one; there are after all a lot of different ones...
I would suggest the deodex-ed / rooted stock rom from RAMAD Gingerbread JVT. As I remember it was always quite stable and fast.
The hardware components inside a modern phone will not wear-out after a year - they are not moving parts! - when ram or a processor wears out it usually results in total system crashing not just a slow down.
Thank you all for your feedbacks and suggestions. I use my phone a lot. Usually i use TV out a lot as i do not have a cable connection in my hostel room. I use my phone a lot. I flashed it atleast more than 100 times. I have not seen any reboots, crashed , soft reboots etc very often. When i use MIUI rom my phone is very fast indeed however , it does not have a TV Out and therefore i have to use a stock based rom.. i will try Rammad's GB Rom as per your suggestion and will report back. As i told you that i dropped it a couple of times, is it possible that any of the Internal components have become loose?
Have you ever tried Advanced task killer? Or even killed tasks?
zadusimple said:
Thank you all for your feedbacks and suggestions. I use my phone a lot. Usually i use TV out a lot as i do not have a cable connection in my hostel room. I use my phone a lot. I flashed it atleast more than 100 times. I have not seen any reboots, crashed , soft reboots etc very often. When i use MIUI rom my phone is very fast indeed however , it does not have a TV Out and therefore i have to use a stock based rom.. i will try Rammad's GB Rom as per your suggestion and will report back. As i told you that i dropped it a couple of times, is it possible that any of the Internal components have become loose?
Click to expand...
Click to collapse
Did you try the ics roms. These r pretty fast..specially team icssgs.
Sent from my GT-I9000 using Tapatalk
Try ICSSGS RC 4.2. I had the same situation as you. It was fine for one year and I was using Darky rom by that time. Suddenly I started feeling that my phone is too slow. Lot of stuck. Sometimes I had to remove battery just to restart.
Now running above ICS rom with Devil 14.2 Kernel its rocking ...
yeah I'd suggest u the advanced taskkiller too
in options you can set the auto killlevel to safe, so that it kills smth like games in the background but not important apps
since then my phone is quite fast even with stockrom
gezze said:
yeah I'd suggest u the advanced taskkiller too
in options you can set the auto killlevel to safe, so that it kills smth like games in the background but not important apps
since then my phone is quite fast even with stockrom
Click to expand...
Click to collapse
Yeah, and you can just use the ATK widget when you close out of something press the icon and it kills all the background apps...
I will surely try ATK and ICS roms as per your suggestions...
Sent from my Galaxy Nexus using Tapatalk
keep us updated...
Just get stock jw1, flash with reparation to wipe everything, then do a factory reset via secret dial code. Now install semaphore 2.5.0 kernel. Dl superuser to get root. Now install thunderbolt tweaks the main package and the 60lmk other addon(read thread how to) . This is the best setup i can think of in terms of speed bat life and functionality. Next step look in pikachus Android optimization thread and remove the bloatware listed there, basically remove as much bloat as possible. Enjoy ur fast phone.
Sent from my GT-I9000 using Tapatalk
Perhaps you should try the ICSSGS RC4.2 with Devil 14.2 LED VC Kernel. I'm on it and its awesome, my phone lags no more and I'm using it for my primary phone.
Sent from my Galaxy S using XDA Premium

My I9000 is shutting down!?!

hi guys i am wondering about that unexplained problem:
some times my SGS I9000 is shutting down!?! i don't know why, by the way my device is "unlocked to work in Algeria" and it was on firmware 2.3.3 BUJVB and now i use 2.3.6 XXJVU
*my device shuts down "sometimes" when i:
-make or answer phone call
-video recording for a time "more then 10 minutes"
-some times just itself
also my device does not want to move apps to USB storage, and is being hot when i use it for a long time "like playing games"
ThAnk you guys, always you are the best in all
trust me bro the ICS that not from sammy it's more stable than sammy rom
give it a try u will really like it and will fined it smoother than sammy rom and faster and now there is more support from dev to ICS
try AOKP with devil kernel very stable and u will never look back to sammy GB
samhawk said:
hi guys i am wondering about that unexplained problem:
some times my SGS I9000 is shutting down!?! i don't know why, by the way my device is "unlocked to work in Algeria" and it was on firmware 2.3.3 BUJVB and now i use 2.3.6 XXJVU
*my device shuts down "sometimes" when i:
-make or answer phone call
-video recording for a time "more then 10 minutes"
-some times just itself
also my device does not want to move apps to USB storage, and is being hot when i use it for a long time "like playing games"
ThAnk you guys, always you are the best in all
Click to expand...
Click to collapse
Only certain apps can be moved to SD. Most apps cannot be. It's up to the developer.
All computers get hot when you run heavy programs on them.
No idea about the shut down problem unfortunately. Typically a factory reset should fix the problem, but that's rather drastic. When did this problem start? Did you install something before it all began?
yahyoh said:
trust me bro the ICS that not from sammy it's more stable than sammy rom
give it a try u will really like it and will fined it smoother than sammy rom and faster and now there is more support from dev to ICS
try AOKP with devil kernel very stable and u will never look back to sammy GB
Click to expand...
Click to collapse
thank you bro
-but i am on JVU 2.3.6 how to get good base befor get in ICS?
-or how to get away from this shet of XXJVU and get in stable ICS?
thank you again
snapper.fishes said:
Only certain apps can be moved to SD. Most apps cannot be. It's up to the developer.
All computers get hot when you run heavy programs on them.
No idea about the shut down problem unfortunately. Typically a factory reset should fix the problem, but that's rather drastic. When did this problem start? Did you install something before it all began?
Click to expand...
Click to collapse
thank you man
i have used 2.3.3 BUJVB for 2 or 3 days and i didn't see any problem, i guess it showed up after i get on JVU 2.3.6. do you think it's going to be a material kinde problems

To update or not xxla6

I'm on the latest stock gb.
Curious if I should update to stock isc if available for xxla6, I'm aware of the dam emmc bug , battery drain , is it worth it any actual changes to os or real functionality? Thank you
Sent from my GT-N7000
No
Dear sonkameja,
I would wait. I recently returned to GB and I am waiting for a major update before I'll try again.
Greetings
c.
I have rooted, upgraded to ICS , running custom rom Criskelo with speedmod k3-3 after 3 days of purchasing the phone and have no issues with battery drain or other things. The phone is smooth like butter , no bugs , have all the GPU hardware accel, and all is looking perfect. However, it took patience, perseverance, and a lot of reading through threads by myself , as it's not just a 1 click upgrade to achieve what you desire.
Don't know about you, but I get : almost 4-4;30h of screen display time , all of it connected to wifi and browsing, checking stupid things online with an overall 15-18h "endurance time"... I mean, more of a tablet experience.
Cheers.
corcovo said:
Dear sonkameja,
I would wait. I recently returned to GB and I am waiting for a major update before I'll try again.
Greetings
c.
Click to expand...
Click to collapse
I appreciate the honesty
I think I'll just my gb and install a launcher
Sent from my GT-N7000

[Q] Stuck with Ginerbread 2.3.6, Slowdown. Need Help

Hi Guys,
I am a Galaxy S user. My Galaxy S was bought in Finland and still running (basically stuck with) Ginerbread 2.3.6 (I9000xxJVU). The phone's hardware is just fine (except slow GPS) but it has become paninfully slow and sometime shutting down/restarting on it's own.
Is it a good idea to reset the existing GingerBread 2.3.6 or get a different ROM?
I am a total novice and have not tried any other ROMs on it. I did some research about the alternative ROMs but there are so many options it made me really confused.
Could you guys suggest any stable and fast option for my Galaxy S i9000?
Also, if you could guide how I could migrate to that particular ROM from present Gingerbread, it would be really helpful.
Thanks in advance for your support and for this great forum.
Cheers
SKT
No reply?!
Could anyone please help?
Hi,I'm not going to be much help as I'm a noob myself but I can say I had same stock laggy gt 19000 which through like u said a lot of confusion about rooting and ROMs researching XDA and YouTube you can do it my galaxy s is like a new phone so stick with it,one tip is always stick to you model and kernel version and write things down and I hope it goes as well as it did for me. Btw I used Odin 3.1 and clockwork to root and Flashed ROM with Cm 10.1 stable.
Sent from GT-19000 CM 10.1. stable
saiko7 said:
Hi Guys,
I am a Galaxy S user. My Galaxy S was bought in Finland and still running (basically stuck with) Ginerbread 2.3.6 (I9000xxJVU). The phone's hardware is just fine (except slow GPS) but it has become paninfully slow and sometime shutting down/restarting on it's own.
Is it a good idea to reset the existing GingerBread 2.3.6 or get a different ROM?
I am a total novice and have not tried any other ROMs on it. I did some research about the alternative ROMs but there are so many options it made me really confused.
Could you guys suggest any stable and fast option for my Galaxy S i9000?
Also, if you could guide how I could migrate to that particular ROM from present Gingerbread, it would be really helpful.
Thanks in advance for your support and for this great forum.
Cheers
SKT
Click to expand...
Click to collapse
if you want to stay to 2.3.6 you can just factory reset your phone
Try this
Shut your Android Galaxy S down (Power off) or remove Battery.
Now press Volume up, Home and Power together.
If the Samsung Symbol is coming up leave the Home Button.
Then there is a boot Menu
Volume Up and Down to Navigate , Home to select the chosen option. ( factory reset )
---------------
if you want to upgrade to ICS or JB rom
root your firmware , choose the right cf-root from this thread
http://forum.xda-developers.com/showthread.php?t=788108
download ICS rom ( i suggest this one )
http://forum.xda-developers.com/showthread.php?t=1687727
install it via recovery
if you want to upgrade to JB
go to development section , chose any custom rom you want
and install via recovery
push thanks :good: if i helped you
The Tox said:
if you want to stay to 2.3.6 you can just factory reset your phone
Try this
Shut your Android Galaxy S down (Power off) or remove Battery.
Now press Volume up, Home and Power together.
If the Samsung Symbol is coming up leave the Home Button.
Then there is a boot Menu
Volume Up and Down to Navigate , Home to select the chosen option. ( factory reset )
---------------
if you want to upgrade to ICS or JB rom
root your firmware , choose the right cf-root from this thread
http://forum.xda-developers.com/showthread.php?t=788108
download ICS rom ( i suggest this one )
http://forum.xda-developers.com/showthread.php?t=1687727
install it via recovery
if you want to upgrade to JB
go to development section , chose any custom rom you want
and install via recovery
push thanks :good: if i helped you
Click to expand...
Click to collapse
Thank you mistrp74 and The Tox for the help.
I am still a bit confused, I cant seem to locate the right cf-root [Ginerbread 2.3.6 (I9000xxJVU)] from the thread you mentioned.
One more thing, how is your experience of running the Custom Roms, is it much better than the Samsung Firmware? Does all the function work fine?
I will need a bit of spoon feeding in the beginning for the update... as I have never tried it before and I am scared of bricking my phone.
So, please don't give up on me
saiko7 said:
Thank you mistrp74 and The Tox for the help.
I am still a bit confused, I cant seem to locate the right cf-root [Ginerbread 2.3.6 (I9000xxJVU)] from the thread you mentioned.
One more thing, how is your experience of running the Custom Roms, is it much better than the Samsung Firmware? Does all the function work fine?
I will need a bit of spoon feeding in the beginning for the update... as I have never tried it before and I am scared of bricking my phone.
So, please don't give up on me
Click to expand...
Click to collapse
The right CF-Root is in the seond to last post on the first page I believe- if you can fnd the one for XXJW4, the one you need is right above it
Custom ICS/JB roms are definitely smoother in many ways, although bear in mind because stock Jelly Bean don't include them, both FM Radio and 3G video calling won't work by default (two features of stock roms, I guess AllShare is another if you use it like me). Otherwise every other function is stable and rock solid. Except for the CM10.2 builds, which are still in an initial stage, the JB roms here should have everything working fine.
Sent from my GT-P7510
Thanks a lot guys!
I finally managed to do it.
I installed the CF-Root without any problem but RemICS-UX v1.3.1 (Team Remics) didn't load. It was stuck at the boot screen.
I thought I bricked my phone... but then I installed Ginerbread 2.3.6 (I9000xxJVU) using Odin and then installed plain vanilla ICS 4.0.3
Coming from Ginerbread 2.3.6 I find a lot of new things and the phone is also snappy and responsive... my old Galaxy S is acting almost like a new phone! So I am really happy.
Now that I am familiar with the process I am confident to tryout other ROMs...
I would like something simple, lightweight and fully-functional/bug-free.
So please let me know if there is any other better ROM I should try.
Thanks again guys!
saiko7 said:
Thanks a lot guys!
I finally managed to do it.
I installed the CF-Root without any problem but RemICS-UX v1.3.1 (Team Remics) didn't load. It was stuck at the boot screen.
I thought I bricked my phone... but then I installed Ginerbread 2.3.6 (I9000xxJVU) using Odin and then installed plain vanilla ICS 4.0.3
Coming from Ginerbread 2.3.6 I find a lot of new things and the phone is also snappy and responsive... my old Galaxy S is acting almost like a new phone! So I am really happy.
Now that I am familiar with the process I am confident to tryout other ROMs...
I would like something simple, lightweight and fully-functional/bug-free.
So please let me know if there is any other better ROM I should try.
Thanks again guys!
Click to expand...
Click to collapse
Go to development section and browse thread and read members feedback , and give a try for each rom until you find your best rom
The Tox said:
Go to development section and browse thread and read members feedback , and give a try for each rom until you find your best rom
Click to expand...
Click to collapse
Thanks!
Just one more question, what's your backup strategy that you guys use?
Or else it a lot of work to update each and every app... one by one... also what about the SMS, call log etc?
saiko7 said:
Thanks!
Just one more question, what's your backup strategy that you guys use?
Or else it a lot of work to update each and every app... one by one... also what about the SMS, call log etc?
Click to expand...
Click to collapse
Because I'm a person who 1.) doesn't use too many apps and 2.) tries to be as economical as possible, I don't have a large amount to backup. My contacts and calendar are always through Google, and for SMS I use SMS Backup and Restore on Play Store. Call log I don't keep, because I'm not a person who really cares for call logs. I only have one other app, Colornote, and that's cloud-synced as well.
Everything else I need is in internal storage :3
Sent from my GT-P7510
saiko7 said:
Thanks!
Just one more question, what's your backup strategy that you guys use?
Or else it a lot of work to update each and every app... one by one... also what about the SMS, call log etc?
Click to expand...
Click to collapse
I use G CLOUD BACKUP just for Sms and system settings
Sent from my GT-I9000 using xda app-developers app
More or less similar situation as TS
Hey guys,
Im in a more or less similar situation as the topic starter. My Samsung Galaxy S GT-I9000 has gotten slow and unresponsive with time.
I would like to update to a custom ROM, and got a little curious about the Slim Bean. But I feel a little unsure about how to proceed.
I'm currently running a custom Gingerbread 2.3.3 ROM, my device is rooted. I flashed this ROM from the Froyo that came with the phone about 2 years ago. It's been so long since I flashed this, I need some directions, as Im afraid I will brick my device.
When I go to recovery mode I see it runs ClockworkMod Recovery v2.5.1.3 - Voodoo lagfix.
Can I just put a Slim Bean 4.2 android version on my internal sd card and run "install zip from sdcard" in ClockwordMod? I would prefer to flash the latest stable version of Slim Bean, which would that be 4.2.2.build7-OFFICIAL?'
Any help would be greatly appreciated,
Bootism
Best way to update from gb or even older to jb is imo the way over cyanogenmod.
Follow this tutorial for 10.1: http://wiki.cyanogenmod.org/w/Install_CM_for_galaxysmtd
And then you can upgrade via cwm to the very good slim bean.
Sent from my GT-I9000 using xda app-developers app
Thanks for the answer!
I recall reading about lots of issues with the lagfix and flashing ROMs. My file storage system is in ext4 instead of standard rfs, I think I should somehow undo this if I recall correct. Is this true?
Do you have an option to unlagfix in recovery?
Sent from my GT-P3110 using xda app-developers app
Yeah, I can choose "voodoo lagfix" in recovery.
It has the following options:
- disable lagfix
- enable lagfix (default)
- /system lagfix on (default)
- /system lagfix off
- debug off (default)
- debug on
Enter disable lagfix and reboot
Sent from my GT-I9000 using xda app-developers app
Ok, so I got Cyanogenmod 10.1.0 running! so far so good
Good job. Now you can flash a zip in cwm.
Sent from my GT-I9000 using xda app-developers app
Yeah, it's a whole new world opening up. Old phone runs relatively smooth, at least way better than before thanks for helping. I will stay on this Cyanogenmod for a bit and explore. Can I just flash in any of the ROMs as .zip in CWM later? I will look for a lightweight ROM for my old phone, any suggestions?

Fast and stable stock firmwares for GT-i9000

Hi guys!I read this forum for a very long time but I really,really can't find exactly what I need.
So I got my first Android phone and it's Samsung Galaxy S-i9000.Now I really know more about android phones and RAM and CPU for Android phones.However,now I think the better choise is Galaxy S 2 because of 1 GB RAM,it's faster and it has flash for camera(But I don't really need flash ).
The problem is RAM and I really like games like Subway Surfers,Temple Run,Ski Challenge,Real Racing.
I own Samsung Galaxy S GT-i9000 2 months and when i bought phone,firmware was Gingerbread 2.3.3.It was smooth and fast,but I had a battery drain problem.After charging and playing games,Android OS was draining my battery,so I had to reboot my phone after every charging and playing game.I searched a solution and i found that draining battery is bug of firmware 2.3.3.So I updated it via Kies to 2.3.4 XXJVQ and draining was still there but less than with 2.3.3.I didn't know what to do,so I searched forums and found that I should update to original Gingerbread 2.3.6 JVU.I bricked my phone,because Odin stuck at setup connection.There was just image of phone-!-computer when I booted.I was able to go to download mode and I immediately took my phone to repair service.Repairman installed to me 2.3.6 JVU and it is bit slower,slower for some games.I am sad.I don't know what to do.It is only 320 MB available.
-What should I do?
-I think I should take my phone to repairman and say him to install new firmware but I don't know which firmware.Can you tell me please?I want fast firmware without bugs and battery drain and I really want to play games like Subway Surfers and Temple run without lags like I used to play wit Gingerbread 2.3.3 and 2.3.4.
-Is there simple solution to change firmware?
-Why did I bricked phone last time when I tryed to update it.Is it because I maybe don't have USB 2.0 port.
Please reply.
P.S. I don't really like Custom ROMS because I think they are slow and unsafe.
Sorry for bad English
nemanja96 said:
-Why did I bricked phone last time when I tryed to update it.Is it because I maybe don't have USB 2.0 port.
Please reply..... P.S. I don't really like Custom ROMS because I think they are slow and unsafe.
Click to expand...
Click to collapse
You should better use USB 2.0 to update the firmware, Samsung USB driver must be installed and Kies process killed by the Task Manager (it loves to work in the background and can block flashing via Odin)
BTW, if you have used incompatible Odin version for your i9000 that also could be a reason for soft brick.
I fail to understand your point, as custom ROMs are actually faster and less laggy (especially when BigMem enabled: 407MB of RAM)
But for gaming is probably recent GB firmware a better choice. So all after JVT are fine, maybe JW7 would be best for you, it was released for Portugal and you can download it from sammobile.com
If not sure about something, check my i9000 guide
tetakpatak said:
You should better use USB 2.0 to update the firmware, Samsung USB driver must be installed and Kies process killed by the Task Manager (it loves to work in the background and can block flashing via Odin)
BTW, if you have used incompatible Odin version for your i9000 that also could be a reason for soft brick.
I fail to understand your point, as custom ROMs are actually faster and less laggy (especially when BigMem enabled: 407MB of RAM)
But for gaming is probably recent GB firmware a better choice. So all after JVT are fine, maybe JW7 would be best for you, it was released for Portugal and you can download it from sammobile.com
If not sure about something, check my i9000 guide
Click to expand...
Click to collapse
I am sure that I closed all Kies proccesses,and I used Odin 1.85 which is compatible with my phone,so I think the problem is USB port.That computer was old.Do you think it is because of old computer?
Wait,it is based on Android 4.x and my phone has to be rooted.I realy don't want to root my phone,and this Gingerbread JVU 2.3.6 (currently on my phone) is value pack too and it is slow.Very less RAM available.Is it about Kernel maybe.My kernel is [email protected] #2. Can I change and how?My phone is not rooted.Thanks!
nemanja96 said:
Wait,it is based on Android 4.x and my phone has to be rooted.I realy don't want to root my phone,and this Gingerbread JVU 2.3.6 (currently on my phone) is value pack and it is slow.Very less RAM available.Is it about Kernel maybe.My kernel is [email protected] #2. Can I change and how?My phone is not rooted.Thanks!
Click to expand...
Click to collapse
I don't understand why wouldn't you root the phone....
Root would give you so much more options. Stock ROMs are full of bloatware that slowes the phone incredibly down.
With root access to your firmware you could uninstall all useless Samsung apps and it would boost the speed of your i9000.
Flashing a Semaphore_2.5.0bm.tar kernel would grant you full root access, CWM recovery and you could enable 409MB of memory on your phone, what isn't imaginable now (on costs of 720p video playback that wouldn't be possible anymore)
tetakpatak said:
I don't understand why wouldn't you root the phone....
Root would give you so much more options. Stock ROMs are full of bloatware that slowes the phone incredibly down.
With root access to your firmware you could uninstall all useless Samsung apps and it would boost the speed of your i9000.
Flashing a Semaphore_2.5.0bm.tar kernel would grant you full root access, CWM recovery and you could enable 409MB of memory on your phone, what isn't imaginable now (on costs of 720p video playback that wouldn't be possible anymore)
Click to expand...
Click to collapse
Because I want to took phone to service and tell them to install me new rom,beacuse I'm scared after first brick.And I think they won't root my phone and install custom roms.That's the reason I want Official Stock Firmware for GT-i9000 which is fast for games.I just want to tell them which firmware I want.And I am so confused about kernels.I don't even know should my phone be rooted to change kernel...
So,please if you know some fast Official Stock Firmware without bugs and lag,tell me. :highfive:
nemanja96 said:
Because I want to took phone to service and tell them to install me new rom,beacuse I'm scared after first brick.And I think they won't root my phone and install custom roms.That's the reason I want Official Stock Firmware for GT-i9000 which is fast for games.I just want to tell them which firmware I want.And I am so confused about kernels.I don't even know should my phone be rooted to change kernel...
So,please if you know some fast Official Stock Firmware without bugs and lag,tell me. :highfive:
Click to expand...
Click to collapse
OK, I understand.
So, the latest one is JW9, not many people know it as it came very late and only for very few countries. But I remember people were saying it was awsome. Try Portugal one and if CSC works in your country stick with it (screenshot attached)
If no, this one will ceirtanly work (as it has multi-CSC) is this JW4 release:
Code:
United Kingdom / Ireland: 2012 April GB 2.3.6 I9000XXJW4 csc: I9000OXAJW5
I know that one, quite smooth, not very fast (compared to JB or KK roms) but stable and with excellent battery life. Best you can do is to download both, check that the zips aren't corrupted (download error) and give them both into your service and tell the guys to try first if JW9 works in your country. It should, actually.
Good luck and let know later if you like them
tetakpatak said:
OK, I understand.
So, the latest one is JW9, not many people know it as it came very late and only for very few countries. But I remember people were saying it was awsome. Try Portugal one and if CSC works in your country stick with it (screenshot attached)
If no, this one will ceirtanly work (as it has multi-CSC) is this JW4 release:
Code:
United Kingdom / Ireland: 2012 April GB 2.3.6 I9000XXJW4 csc: I9000OXAJW5
I know that one, quite smooth, not very fast (compared to JB or KK roms) but stable and with excellent battery life. Best you can do is to download both, check that the zips aren't corrupted (download error) and give them both into your service and tell the guys to try first if JW9 works in your country. It should, actually.
Good luck and let know later if you like them
Click to expand...
Click to collapse
Allright,I think I'm will download just JW4.I googled,but there are many opinions.
Have you tried it yet?Tell me is it fast for games.That's most importan to me.
Also,people say it has 364 MB avaiable,BUT i'm little suspicious.Some peole say that 200-220 MB RAM is already unavailable when you turn on your phone.Is that true?I'm sorry if I'm boring but I really want to know all these answers before I took my phone to service.
THANK YOU FOR ALL YOUR HELP.
nemanja96 said:
Allright,I think I'm will download just JW4.I googled,but there are many opinions.
Have you tried it yet?Tell me is it fast for games.That's most importan to me.
Click to expand...
Click to collapse
BTW, you know, I got so curious about the JW9 as I really didn't know it and I've just flashed JW9 today and: I must say I am bit shocked how good it is! It is far the best gingerbread I ever tried, incredibly fast and smooth., much better than the CM7.x (2.3.7)!!
Some peole say that 200-220 MB RAM is already unavailable when you turn on your phone.Is that true?
Click to expand...
Click to collapse
Unfortunatelly, yes.
Also,people say it has 364 MB avaiable,BUT i'm little suspicious.I'm sorry if I'm boring but I really want to know all these answers before I took my phone to service.
THANK YOU FOR ALL YOUR HELP.
Click to expand...
Click to collapse
No problem mate
Yes, it is all together 364 available as part of 500MB is fixed (reserved) for some system functions.... actually, with only 500MB capacity, the RAM of the i9000 is already around 60% full / used before you start any app or game.
Go for JW9, it is amazing! It is obviously better, faster and smoother than the JW4.
It will be no problem about signal I think, basebands in Europa are so similar.
I just showed it my wife and she wants that I install it for her instead of the CM11...... she prefers GB's layout and design..... Oh, yes: it just flies with SpeedMod kernel k-17-3.... but it is also very fast with its stock kernel
tetakpatak said:
BTW, you know, I got so curious about the JW9 as I really didn't know it and I've just flashed JW9 today and: I must say I am bit shocked how good it is! It is far the best gingerbread I ever tried, incredibly fast and smooth., much better than the CM7.x (2.3.7)!!
Unfortunatelly, yes.
No problem mate
Yes, it is all together 364 available as part of 500MB is fixed (reserved) for some system functions.... actually, with only 500MB capacity, the RAM of the i9000 is already around 60% full / used before you start any app or game.
Go for JW9, it is amazing! It is obviously better, faster and smoother than the JW4.
It will be no problem about signal I think, basebands in Europa are so similar.
I just showed it my wife and she wants that I install it for her instead of the CM11...... she prefers GB's layout and design..... Oh, yes: it just flies with SpeedMod kernel k-17-3.... but it is also very fast with its stock kernel
Click to expand...
Click to collapse
I changed my mind.Then,I will probably tell them to install JW9.I don't care does it include my language,but I just need english language.Is english avaiable in JW9.After 1-2 days using tell me,please,is that good firmware.I just wanna know some basics:
-Is battery good? (I gotta admit that battery on 2.3.6 JVU (now on my phone) is very good,no Android OS bugs,but performance is bad)
-How much RAM is avaiable and how much is unaviable when you turn on phone?
-Is Temple Run lag?
-Is that Value Pack? (I hate to lose RAM on that kind of firmware,I don't even like new features,I really don't care )
If I finally make my phone stable and fast,you're the best!
nemanja96 said:
I changed my mind.Then,I will probably tell them to install JW9.I don't care does it include my language,but I just need english language.Is english avaiable in JW9.After 1-2 days using tell me,please,is that good firmware.I just wanna know some basics:
-Is battery good? (I gotta admit that battery on 2.3.6 JVU (now on my phone) is very good,no Android OS bugs,but performance is bad)
-How much RAM is avaiable and how much is unaviable when you turn on phone?
-Is Temple Run lag?
-Is that Value Pack? (I hate to lose RAM on that kind of firmware,I don't even like new features,I really don't care )
If I finally make my phone stable and fast,you're the best!
Click to expand...
Click to collapse
LOL, it is not about language pack, but Baseband / Radio- frequences for mobile networks that can vary in different regions of the world
Comparation: I know JVU well from before, IMHO, the JW9 is better in all terms. Faster, smoother, great.
It also looks much nicer, I've attached you few screenshots, I only couldn't make it fast enough to open the drawer before screen was printed (releasing of back+home button makes a shot, but also exits from laucher drawer)... it is my cat as wallpaper
My wife has liked so much the JW9 that she asked me to de-install her CM11 and flash JW9 on her i9000 today!
By no apps running, I had 42% RAM free, what is very good for the i9000
But you will also need some day root access, if nothing else just to uninstall Samsung's bloat apps that you'll never need and they slow your phone down. With root apps, one can hibernate many processes and
tetakpatak said:
LOL, it is not about language pack, but Baseband / Radio- frequences for mobile networks that can vary in different regions of the world
Comparation: I know JVU well from before, IMHO, the JW9 is better in all terms. Faster, smoother, great.
It also looks much nicer, I've attached you few screenshots, I only couldn't make it fast enough to open the drawer before screen was printed (releasing of back+home button makes a shot, but also exits from laucher drawer)... it is my cat as wallpaper
My wife has liked so much the JW9 that she asked me to de-install her CM11 and flash JW9 on her i9000 today!
By no apps running, I had 42% RAM free, what is very good for the i9000
But you will also need some day root access, if nothing else just to uninstall Samsung's bloat apps that you'll never need and they slow your phone down. With root apps, one can hibernate many processes and
Click to expand...
Click to collapse
I still don't get it about Baseband/Radio freq.Can you explain me.
How much MB is avaiable.On jvu is 320,and on JW9?
nemanja96 said:
I still don't get it about Baseband/Radio freq.Can you explain me.
How much MB is avaiable.On jvu is 320,and on JW9?
Click to expand...
Click to collapse
Don't worry about baseband. It will work with your country's network. The guys in service will take care of it.
I will check later about RAM, but it will probably be about the same like with JVU.
I know you need more memory, that is why I suggested you to flash a custom kernel, Semaphore enables up to 384,5 MB on stock GB roms and up to 409 MB with KK roms.
Read here: http://78.46.194.137/changelog/gb-version
Download link JW9
Hi,
I've checked the firmware for Portugal from sammobile.com and it is totally bloated with stuff for some portugese provider.
Here you have a clean- non-branded XWJW9 firmware for your i9000, best Gingerbread I ever tried:
I9000XWJW9_I9000OXAJW4_I9000XWJW1 download link
It has open Europe-CSC so it will ceirtanly work also in your country. If your language keyboard is missing, just install free app MultiLingual Keyboard
So, good luck and lots of fun- happy New Year with your new i9000
tetakpatak said:
Hi,
I've checked the firmware for Portugal from sammobile.com and it is totally bloated with stuff for some portugese provider.
Here you have a clean- non-branded XWJW9 firmware for your i9000, best Gingerbread I ever tried:
I9000XWJW9_I9000OXAJW4_I9000XWJW1 download link
It has open Europe-CSC so it will ceirtanly work also in your country. If your language keyboard is missing, just install free app MultiLingual Keyboard
So, good luck and lots of fun- happy New Year with your new i9000
Click to expand...
Click to collapse
Thanks! Happy New Year!
Can I flash either the Portugese or German XWJW9 firmware on my SGS? The one I'm currently on right now is the XXJW4 UK/IRELAND with multi-csc. Wifi signal is weak but when the phone is right beside the router, the wifi signal fluctuates.
I'm in the Philippines by the way. I'm a bit worried that the baseband and CSC for the XWJW9 won't work in my country.
Thanks.
peachmangupay said:
Can I flash either the Portugese or German XWJW9 firmware on my SGS? The one I'm currently on right now is the XXJW4 UK/IRELAND with multi-csc. Wifi signal is weak but when the phone is right beside the router, the wifi signal fluctuates.
I'm in the Philippines by the way. I'm a bit worried that the baseband and CSC for the XWJW9 won't work in my country.
Thanks.
Click to expand...
Click to collapse
Yes, JW9 will work. If the baseband isn't working, you can replace the modem later with any root file browser. Sometimes changing the region in the Wi-Fi settings can really help. You should try. Maybe no need for JW9.
tetakpatalked from Nexus 7 flo

Categories

Resources