Database Develop

Revone not found.

I've done everything by the book, but when I type "chmode 755 revone" it says it's not found; I've also tried "chmode 755 revone.bin", still doesn't work.
What can I do?
I'm using Terminal Emulator and Rom Toolbox Lite, doesn't work in both.

There's the obvious questions:
What directory are you in when you typed that command?
Is that the same directory you copied revone to on your phone?

deeevan said:
There's the obvious questions:
What directory are you in when you typed that command?
Is that the same directory you copied revone to on your phone?
Click to expand...
Click to collapse
cd /data/local/tmp
For both.

The command is chmod, you added an e to the end. It's complaining that the command can't be found, not revone.

deeevan said:
The command is chmod, you added an e to the end. It's complaining that the command can't be found, not revone.
Click to expand...
Click to collapse
Oh boy, now I'm ashamed.
Ok, done it, but now it says "error 1", what should I do?
EDIT: I've tried "./revone -p" [with a lower case p] and it says error, but also says "revone successful".
After that I rebooted, then tried "./revone -s 0 -u" and I get error code 1. What should I do?

Must downgrade to android 4.2 or less. If your on android 4.3, Rev one will not work.
Sent from my Nexus 7 using xda app-developers app

(SOLVED)--Require of sim unlock ...how to carry out instruction

------------------------------------SOLVED---------------------------------------------------------------------
JUST CARRIED OUT THE COMMANDS IN CWM RECOVERY ....THAT SOLVED ALL PROBLEMS
I have htc j one ...japanese htc one
Hboot is 1.52 and android 4.1.2
I have been able to s off, unlock bootloader using revone
I have flash cwm and rooted phone
Now I need to sim unlock the phone with some adb commands given in the below mentioned website :-
http://htcsoku.info/htcsokudev-news/au-m7-device-sim-unlock/
You can easily auto translate the above page if u open it in google chrome
Can anyone help me with that ?
Thanks in advance
Sent from my GT-N7000 using xda premium

download and unrar this in adb folder >>> http://www.androidfilehost.com/?fid=23159073880933098
they edited misc.img and say to do this :
adb push misc.img /
adb shell
# dd if=/misc.img of=/dev/block/mmcblk0p19
# reboot
hope it helps

criszz said:
download and unrar this in adb folder >>> http://www.androidfilehost.com/?fid=23159073880933098
they edited misc.img and say to do this :
adb push misc.img /
adb shell
# dd if=/misc.img of=/dev/block/mmcblk0p19
# reboot
hope it helps
Click to expand...
Click to collapse
Thanks for replying
I will download this file and put in adb folder
I shud do
adb push misc.img
( is this commabd correct or do I need to to put / ar back)
Then
Adb shell
It shows $ at the end
So it type
Su
Now it becomes #
Then I shud type
dd if=/misc.img of=/dev/block/mmcblk0p19
# reboot
Am I correct ?
Plz help as I am noob in this ...but am trying to learn
Sent from my GT-N7000 using xda premium

The auto-translated instructions are not good enough, and this is a very risky procedure. Fortunately, with code you usually don't need to read the words to understand it. Fortunately, with my Japanese-speaking colleague's help, I understand everything. Some things to know:
- Don't try this unless you are content to risk your phone, because I can tell he made mistakes in his instructions
- To reiterate, you either need to follow his incorrect instructions or you need to listen to me (why would you do that?)
- Look at the code blocks--all that code is meant to be run on your computer while the phone is connected to USB.
- There is only one complicated step, and this is the one with the incorrect instructions.
What he says:
Open misc.img in a hex editor, represent [00001023] as [11] and save. If you are lazy, use the file I modified already. <link>
There are two problems with this statement. First, "00001023" is not a reasonable position in the file. It means "line 10, column 3" (lines start with zero, columns start with zero). But there are 16 bytes per line, so what he really means is "byte 147". (Each pair of hex characters is a byte. The lowest value is 00, the highest value is ff.)
The second problem is that in his "already modified" file, that byte is "00", not "11". This is what I expected, because it's not reasonable for number="11" to mean "unlocked". More likely, "11" is his carrier and "00" is when the phone is unlocked.
What I advise is getting your carrier to unlock the phone, and if that's not possible, proceed only if you are willing to risk your phone. Follow his instructions, but when you get your misc.img file, download his modified version and compare them. If they differ in only one position, install his file to your phone (as per the instructions). If they are very different but the same size, you can try changing byte 147 to 00 (if the surrounding bytes are also all 00). Save the unmodified .img file, because you might be able to use it to rescue your phone if this fails.
Note: this is risky, with or without language barrier issues. At least 10% chance of bricking your phone.

Thanks a lot for your advice.
But it is not possible to carrier unlock the phone
Is there any safe way to sim unlock the phone ?
Currently am stuck ...
Sent from my GT-N7000 using xda premium

sitanshu91 said:
But it is not possible to carrier unlock the phone
Is there any safe way to sim unlock the phone ?
Click to expand...
Click to collapse
I think it's probably safe to flash the misc.img file he uploaded and linked to, if (and only if) it is exactly the same as yours, except for that one byte. Low chance of bricking the phone.

But currently can you tell me to how to pull the image coz I havr followed his command ...
Adb shell
It strt with $
Su
Now # come
Then somd dd comand
Here it shows operation cannot complete(will update what is exactly error in few min)
Exit
Adb pull misc.img
Here it shows error device not detected
Can you help me to first pull file so I can compare
Sent from my GT-N7000 using xda premium

Weird... you got a successful ADB shell, then it stopped detecting your device? I suppose you should just try again.
My phone is not the same as yours, so you shouldn't compare your partition19 to mine. You have a phone specific to Japan, right?

fenstre said:
Weird... you got a successful ADB shell, then it stopped detecting your device? I suppose you should just try again.
My phone is not the same as yours, so you shouldn't compare your partition19 to mine. You have a phone specific to Japan, right?
Click to expand...
Click to collapse
see this is what i get
C:\adb\adt-bundle-windows-x86-20131030\sdk\platform-tools>adb shell
[email protected]:/ $ su
su
[email protected]:/ # dd if=/dev/block/mmcblk0p19 of=/misc.img
dd if=/dev/block/mmcblk0p19 of=/misc.img
/misc.img: cannot open for write: Read-only file system
1|[email protected]:/ #
can you tell me why it says " /misc.img: cannot open for write: Read-only file system "
requesting your help
thanks

sitanshu91 said:
can you tell me why it says " /misc.img: cannot open for write: Read-only file system "
Click to expand...
Click to collapse
That's actually normal (because you're not supposed to write to the root of the phone's filesystem). Every time the instructions say "/", you can replace it with "/sdcard/", and every time they say "/misc.img", you can think "/sdcard/misc.img". (The instructions were carelessly written.)

fenstre said:
That's actually normal (because you're not supposed to write to the root of the phone's filesystem). Every time the instructions say "/", you can replace it with "/sdcard/", and every time they say "/misc.img", you can think "/sdcard/misc.img". (The instructions were carelessly written.)
Click to expand...
Click to collapse
so you say i should proceed
see again i did the same
C:\adb\adt-bundle-windows-x86-20131030\sdk\platform-tools>adb devices
List of devices attached
HT35Z******* device
C:\adb\adt-bundle-windows-x86-20131030\sdk\platform-tools>adb shell
[email protected]:/ $ su
su
[email protected]:/ # dd if=/dev/block/mmcblk0p19 of=/misc.img
dd if=/dev/block/mmcblk0p19 of=/misc.img
/misc.img: cannot open for write: Read-only file system
1|[email protected]:/ # exit
exit
1|[email protected]:/ $ adb pull misc.img
adb pull misc.img
* daemon not running. starting it now on port 5038 *
* daemon started successfully *
error: device not found
1|[email protected]:/ $
now how should i proceed ....please help

Guys requesting help before the new year starts
So I can use my phone in new year
Sent from my GT-N7000 using xda premium

sitanshu91 said:
/misc.img: cannot open for write: Read-only file system
Click to expand...
Click to collapse
are you doing this is fastboot? / recovery? is your device bootloader unlocked through htc dev?

Kasi!995 said:
are you doing this is fastboot? / recovery? is your device bootloader unlocked through htc dev?
Click to expand...
Click to collapse
yes this is unlocked bootloader ...i have done it thru revone
now i have installed busybox
and i can progress
C:\adb\adt-bundle-windows-x86-20131030\sdk\platform-tools>adb devices
List of devices attached
HT3******* device
C:\adb\adt-bundle-windows-x86-20131030\sdk\platform-tools>adb shell
[email protected]:/ $ su
su
[email protected]:/ # dd if=/dev/block/mmcblk0p19 of=/misc.img
dd if=/dev/block/mmcblk0p19 of=/misc.img
2045+0 records in
2045+0 records out
1047040 bytes transferred in 0.106 secs (9877735 bytes/sec)
[email protected]:/ # exit
exit
[email protected]:/ $ adb pull misc.img
adb pull misc.img
* daemon not running. starting it now on port 5038 *
* daemon started successfully *
error: device not found
1|[email protected]:/ $
can you help me now
i want to do as written in this
http://htcsoku.info/htcsokudev-news/au-m7-device-sim-unlock/
thanks

sitanshu91 said:
can you help me now
i want to do as written in this
http://htcsoku.info/htcsokudev-news/au-m7-device-sim-unlock/
thanks
Click to expand...
Click to collapse
what Recovery do you have flashed? TWRP?

Its cwm recovery
Sent from my GT-N7000 using xda premium

Run adb pull outside of adb shell.

1st problem :-
C:\adb\adt-bundle-windows-x86-20131030\sdk\platform-tools>adb shell
[email protected]:/ $ su
su
[email protected]:/ # dd if=/dev/block/mmcblk0p19 of=/misc.img
dd if=/dev/block/mmcblk0p19 of=/misc.img
2045+0 records in
2045+0 records out
1047040 bytes transferred in 0.106 secs (9877735 bytes/sec)
[email protected]:/ # exit
exit
[email protected]:/ $ adb pull misc.img
adb pull misc.img
* daemon not running. starting it now on port 5038 *
* daemon started successfully *
error: device not found
1|[email protected]:/ $
can you tell me where is my mistake
What can I do can you type command
2nd problem
similiarly when i try
C:\adb\adt-bundle-windows-x86-20131030\sdk\platform-tools>adb push misc.img /
failed to copy 'misc.img' to '//misc.img': Permission denied
request you to please help me
thanks and regards
Sent from my GT-N7000 using xda premium

what is your status now?

criszz said:
what is your status now?
Click to expand...
Click to collapse
i am very glad that you asked .....happy new year
Now my status is sim unlocked ....but i can use only to make and receive phone calls and sms ...
now here is the problem
i cant use data (2g/3g) on my phone
do u know how to do that
thanks
sitanshu

HTC Butterfly S 9060 easy unlock bootloader(no need of htcDev)

hey gus i have unlocked my 9060 by this method and its pretty easy(Thanks to its creators).........and the best part is that u dont have lose any data from ur phone .................(ur device must be S-off)
this method is imported from my old phone desire 601 ..........credit:
@scotty1223 thanks
u just have to do this .......
first go to this site and do as he say...... and install the adb to ur pc.........credit goes to @Snoop05
and then just open this (adb.zip) and download it ......
extract it to short path like:--- C:\.
now open the command prompt where u have extracted (press the left shift in that extracted folder and right click and click open command prompt) or locate to the folder
Now u just have to unlock ......
type adb shell (in the command prompt)
type su
type or paste echo -ne "HTCU" | dd of=/dev/block/mmcblk0p3 bs=1 seek=33796
****i advice copy and past****
type exit
type exit
type adb reboot bootloader (for checking its position *****unlocked***** )
type fastboot reboot ( to back in os)

hey @rajat ,can u give me the stock systemUI.apk 4.2.2 9060 ,,,,,it's urgent....thanks in advance

thanks for the new method. can i try this with my htc one m7?

goodman_east said:
thanks for the new method. can i try this with my htc one m7?
Click to expand...
Click to collapse
u can but u have to change this line only the main code.........................
echo -ne "HTCU" | dd of=/dev/block/mmcblk0p2 bs=1 seek=33796
cause m7 memory partition is different from zara
else is same .............and btw what m7 u have is it china 802t.............

Good
goodman_east said:
thanks for the new method. can i try this with my htc one m7?
Click to expand...
Click to collapse
Great job

rajat836 said:
hey gus i have unlocked my 9060 by this method and its pretty easy(Thanks to its creators).........and the best part is that u dont have lose any data from ur phone .................(ur device must be S-off)
this method is imported from my old phone desire 601 ..........credit:
@scotty1223 thanks
u just have to do this .......
first go to this site and do as he say...... and install the adb to ur pc.........credit goes to @Snoop05
and then just open this (adb.zip) and download it ......
extract it to short path like:--- C:\.
now open the command prompt where u have extracted (press the left shift in that extracted folder and right click and click open command prompt) or locate to the folder
Now u just have to unlock ......
type adb shell (in the command prompt)
type su
type or paste echo -ne "HTCU" | dd of=/dev/block/mmcblk0p3 bs=1 seek=33796
****i advice copy and past****
type exit
type exit
type adb reboot bootloader (for checking its position *****unlocked***** )
type fastboot reboot ( to back in os)
Click to expand...
Click to collapse
What is the use unlock ?
How I can make the S - OFF?
Thanks for the input.

64 Bit Stock Recovery

Hi guys,
Some1 please upload here stock recovery of 64 bit device.
I will make TWRP and CWM Recovery,but i need this file and its no possible to get from my 510.

How I can extract from my 510?
Sent from my HTC Desire 510 using XDA Free mobile app

Try connect via adb shell or in terminal emulator type: cat /proc/mtd and press enter
you will see which is recovery partition and then type: dd if=/dev/mtd/mtd1 of=/sdcard/recovery.img (note that mtd1 you must replace with number which is recovery partition)
after that you will have recovery.img on your sd card

there is other guide:
http://howtorootcherrymobilesnap.weebly.com/adb/how-to-extract-img-files-via-adb-ex-bootimg

vwadam said:
Try connect via adb shell or in terminal emulator type: cat /proc/mtd and press enter
you will see which is recovery partition and then type: dd if=/dev/mtd/mtd1 of=/sdcard/recovery.img (note that mtd1 you must replace with number which is recovery partition)
after that you will have recovery.img on your sd card
Click to expand...
Click to collapse
Code:
[email protected]_a11ul:/ # cat /proc/mtd
cat /proc/mtd
tmp-mksh: cat: /proc/mtd: No such file or directory
EDIT:
http://postimg.org/image/v40y6pecz/
Code:
dd if=/dev/block/mmcblk0p48 of=/sdcard/recovery.img
and result: https://drive.google.com/file/d/0B3-NJk0QRfxXaG5sWDc1NG5tbzg/view?usp=sharing
but I tried "fastboot boot recovery.img" and will not boot.

but I tried "fastboot boot recovery.img" and will not boot.
Click to expand...
Click to collapse
fastboot flash boot recovery.img ?
Sent from my HTC Desire 510 using XDA Free mobile app

lucyr03 said:
Code:
[email protected]_a11ul:/ # cat /proc/mtd
cat /proc/mtd
tmp-mksh: cat: /proc/mtd: No such file or directory
EDIT:
http://postimg.org/image/v40y6pecz/
Code:
dd if=/dev/block/mmcblk0p48 of=/sdcard/recovery.img
and result: https://drive.google.com/file/d/0B3-NJk0QRfxXaG5sWDc1NG5tbzg/view?usp=sharing
but I tried "fastboot boot recovery.img" and will not boot.
Click to expand...
Click to collapse
I tried it and worked perfect,thanks for help.
I will try to make twrp recovery soon

vwadam said:
I tried it and worked perfect,thanks for help.
I will try to make twrp recovery soon
Click to expand...
Click to collapse
I'm waiting for twrp
Sent from my HTC Desire 510 using XDA Free mobile app

[Guide] Remove magisk modules without TWRP!

First of all, this was all made possible by s3axel
Now on to the tutorial:
Flash s3axel's stock recovery with adb enabled (Tutorial in post)
Now you have that, boot into the recovery and put in your security method (pattern, pin, etc)
Now open CMD and type "adb shell"
To find a specific module
type "ls -Ral data/adb/modules"
Now to remove the magisk module
type "rm -r data/adb/modules/module_name"
(module_name is the name of the module)
I'll be sure to try and help with any questions in the comments so don't be shy to ask

Don't you have to cd to a path before executing the remove command?
EDIT:
You have to cd to data/adb/modules and then run the rm -r command. It worked perfectly! Now I can actually try different modules. Thanks!
Sent from my OnePlus7TPro using XDA Labs

Lossyx said:
Don't you have to cd to a path before executing the remove command?
EDIT:
You have to cd to data/adb/modules and then run the rm -r command. It worked perfectly! Now I can actually try different modules. Thanks!
Sent from my OnePlus7TPro using XDA Labs
Click to expand...
Click to collapse
Sorry forgot that yeah, thanks for the heads up. I edited the post

HolyChickenGuy said:
First of all, this was all made possible by s3axel
type "rm -r data/adb/modules/module_name"
Click to expand...
Click to collapse
Remembers me of how to shoot yourself in the foot with bash...
Code:
$ ls
foot.c foot.h foot.o toe.c toe.o
$ rm * .o
rm:.o no such file or directory
$ ls
$
Always be carefull when using "rm -r" or "rm -rf". :laugh:

thank you very much for you post, really helped me

I followed this guide but didn't succeed!
When imputing the command "ls -ral /data/adb/modules" I get the message that there is not that file or directory...
Inputing "ls -ral /data/adb" I find that there are 2 directorys under /adb: "system" and "root", but no "modules"
I'm stuck here. please help me

salomaoa said:
I followed this guide but didn't succeed!
When imputing the command "ls -ral /data/adb/modules" I get the message that there is not that file or directory...
Inputing "ls -ral /data/adb" I find that there are 2 directorys under /adb: "system" and "root", but no "modules"
I'm stuck here. please help me
Click to expand...
Click to collapse
I think you can use "cd file_name" to enter file
"cd .." to back
You can type "ls" to show any file
And you go in the file and type "rm -r *" to remove all file and folder

ricky886 said:
I think you can use "cd file_name" to enter file
"cd .." to back
You can type "ls" to show any file
And you go in the file and type "rm -r *" to remove all file and folder
Click to expand...
Click to collapse
I was hoping you could guide me? I want to delete lock.ogg and unlock.ogg in system/product/media/ui folder and copy new ones. BTW, I have got the adb enabled img of 10.0.8...

adeelsmatrix said:
I was hoping you could guide me? I want to delete lock.ogg and unlock.ogg in system/product/media/ui folder and copy new ones. BTW, I have got the adb enabled img of 10.0.8...
Click to expand...
Click to collapse
You'll have to use magisk for that.
System is permanent read only in Android 10
Sent from my OnePlus7TPro using XDA Labs

adeelsmatrix said:
I was hoping you could guide me? I want to delete lock.ogg and unlock.ogg in system/product/media/ui folder and copy new ones. BTW, I have got the adb enabled img of 10.0.8...
Click to expand...
Click to collapse
You can try this to remove that two files
Adb shell
CD system/product/media/ui
Rm lock.ogg
Rm unlock.ogg

ricky886 said:
You can try this to remove that two files
Adb shell
CD system/product/media/ui
Rm lock.ogg
Rm unlock.ogg
Click to expand...
Click to collapse
Thanks for the reply bro, Actually I need to overwrite these two files with the files of same names. So how to put new files with the same names. PEACE...

adeelsmatrix said:
Thanks for the reply bro, Actually I need to overwrite these two files with the files of same names. So how to put new files with the same names. PEACE...
Click to expand...
Click to collapse
Check this
https://adbshell.com/commands
I think you can use cp(copy) or mv(move) commands

Lossyx said:
You'll have to use magisk for that.
System is permanent read only in Android 10
Sent from my OnePlus7TPro using XDA Labs
Click to expand...
Click to collapse
How magisk could help in this regard. Is there any specific module...?
---------- Post added at 07:23 AM ---------- Previous post was at 07:22 AM ----------
ricky886 said:
Check this
https://adbshell.com/commands
I think you can use cp(copy) or mv(move) commands
Click to expand...
Click to collapse
Thanks, I'll try this...

ricky886 said:
Check this
https://adbshell.com/commands
I think you can use cp(copy) or mv(move) commands
Click to expand...
Click to collapse
I can enter into systems but adb shell is displaying only three directories/folders (bin, etc and lib64). I can't get into system/product/media/audio/ui folder. Any suggestions....?
As I know off you can't mount system rw in Android 10 for now...

salomaoa said:
I followed this guide but didn't succeed!
When imputing the command "ls -ral /data/adb/modules" I get the message that there is not that file or directory...
Inputing "ls -ral /data/adb" I find that there are 2 directorys under /adb: "system" and "root", but no "modules"
I'm stuck here. please help me
Click to expand...
Click to collapse
I am stuck here as well, "ls -ral /data/adb" tells me no such file or directory.
"ls -ral /data" only returns
# ls -Ral data
data:
total 0
drwxr-xr-x 2 root root 40 2019-12-25 01:32 .
drwxr-xr-x 28 root root 1100 1970-03-14 14:38 ..
I installed a Magisk module and Now im stuck in boot animation. Have no way of uninstalling at the moment. Please let me know if you have a solution

thanks for this guide !!

c19932 said:
I am stuck here as well, "ls -ral /data/adb" tells me no such file or directory.
"ls -ral /data" only returns
# ls -Ral data
data:
total 0
drwxr-xr-x 2 root root 40 2019-12-25 01:32 .
drwxr-xr-x 28 root root 1100 1970-03-14 14:38 ..
I installed a Magisk module and Now im stuck in boot animation. Have no way of uninstalling at the moment. Please let me know if you have a solution
Click to expand...
Click to collapse
Looks like you forgot the "/" infront of data so unless you are already in the root directory it is listing the contents of the directory "data" that is in your current location which it looks like doesn't exist.
Either run
# ls -Ral /data
or
# cd /
# ls -Ral data
Hope that helps ya out.
Stay Kung Flu Free
Later

Thanks for this helpful guide,
Just an FYI for my 10.0.7AA i reboot into recovery but i cannot decrypt, however I could use those commands and helped me remove the modules.
However, the phone is still not booting, does it have anything to do with the recovery pushed? Do I need to then go place the stock recovery back?
Or has it got something else wrong?
Thanks again.

Another way with a computer running adb:
If adb debugging is enabled:
"adb wait-for-device shell magisk --remove-modules"
If not, flash the stock boot.img, enable USB debugging, flash the magisk_patched_boot.img and then run the command.
It will remove all modules even if your SystemUI crashes. If you are stuck before adb commands can be issued, the OT's tutorial will do.

Macusercom said:
Another way with a computer running adb:
If adb debugging is enabled:
"adb wait-for-device shell magisk --remove-modules"
If not, flash the stock boot.img, enable USB debugging, flash the magisk_patched_boot.img and then run the command.
It will remove all modules even if your SystemUI crashes. If you are stuck before adb commands can be issued, the OT's tutorial will do.
Click to expand...
Click to collapse
Thanks, good to know!
So only prerequisite is that ADB/USB debugging is enabled and it works for both Magisk and Xposed modules?