[Q] Camera Samsung Galaxy SII - Galaxy S I9000 Q&A, Help & Troubleshooting

Hi,
I am passionate about mobile phones with camera, and was very pleased when I found your post (via gsmarena) to increase the capacity of video for Samsung Galaxy> 24 Mbs and increase the bitrate of the audio. However I had a problem that left me very upset:
My model:
GT-I9100 Version: 4.0.3
Release baseband: I9100UHLPE
Kernel Version: 3.0.15-I9100UHLPE-CL200654 se.infra @ SEP-94 # 3
No. of compilation: IML74K.UHLPE .
I used the root explorer . I was in the folder / system / app (not apps) . renamed the C (uppercase) to amera.apk. bak to bak and Camera.odex . I copied the attributes changed to 644 and reboot . When he returned the camera starts to be activated and everything is dark.
Would someone help me?
Have I to use the original factory (instead of new I´ve installed) ??
Could someone help-me ??
Thank you!!

Related

[ROM] Stock Archos ICS Firmware 4.0.7 - ROOT Version !

Hi all !
Rom => The Last Archos ICS Firmware 4.0.7 - Root version - based on Stock Archos ICS Firmware 4.0.7 !
Upadte 16-07-2012 - to fix some touchscreen issue ( not solved - seems to be also in Official Archos Firmware !)
This Rom should be work for all Archos G9 ....but you need activate SDE menu !
In this Rom original files have not been modified, only was added "su" , "Superuser.apk" !
All improvements to the original Firmware 4.0.7 , you can also find in this Root version .
Firmware changes
Version 4.0.7 - June 19th, 2012
Applications: fix no audio when launching video capture impacting applications like Skype
Display: graphics performance enhancements
Hard drive based products: avoid potential loss of hard drive when 3G USB port is switched on with no peripheral attached
Wi-Fi: fix some more disconnect cases happening on some access points
This Root version works on all tablets gen9, is stable and can be used as a daily ROM !
These are the files you need to install Root Version :
- archos.ext4 in archive : archos_407.zip
- zImage and initramfs.cpio.lzo in archive : Kernel_407.zip Mirror : kernel_407.zip - 4.72 MB
Installation :
- copy archos.ext4 into Internal Storage ( /mnt/storage )
[*]- reboot into SDE menu and under Developer Edition Menu ,( remove Android Kernel if available) than Flash Kernel and Initramfs : copy zImage and initramfs.cpio.lzo on the new driver that appears on desktop/laptop ;
[*]- ok ! and wait for reboot your devices : after reboot you can see Android update system for a while .....be patient !
In this Rom we do not have custom "bootanimation" , no extra apps added , anything else in addition to original !!!
For all those who want a proper use (without touchscreen issue) ....please check this thread ! Thanks !
regard,
surdu_petru
Thanks for your work!
Nicee Will download hand try in a few hours
Sent from my HTC One X using xda premium
Downloading now, thanks surdu_petru
Is VPN support present?
zando2712 said:
Is VPN support present?
Click to expand...
Click to collapse
Hi!
You can check lib/modules/ to see if is there tun.ko module !!!
I installed firmware before you responded.
Thank you surdu_petru!
VPN support is in.
Browsing to lib/modules/ I see no tun.ko though.
should not be ....
should not be ....
I continue riding the loop
practice in the installation, the tablet starts but if I turn it off at the next reboot would always live as if part of the new rom (upgrade Android ...)
retraced to 4.06 waiting for better times
thanks
miki8989 said:
should not be ....
I continue riding the loop
practice in the installation, the tablet starts but if I turn it off at the next reboot would always live as if part of the new rom (upgrade Android ...)
retraced to 4.06 waiting for better times
thanks
Click to expand...
Click to collapse
....I'll reupdate now the initramfs !
Thanks !!!
Ok ! Now you can re-download kernel.407.zip and re-flash !!! Good luck ...
tanks
Greetings,
After upgrading to 4.0.7 GMail crashes at startup: "Unfortunately, Gmail has stopped".
Anyone else experience this problem?
4.0.7 installed and working as expected!
abel.e.pereira said:
Greetings,
After upgrading to 4.0.7 GMail crashes at startup: "Unfortunately, Gmail has stopped".
Anyone else experience this problem?
Click to expand...
Click to collapse
Hi!
...do you updated on the market the latest version ?
surdu_petru said:
Hi!
...do you updated on the market the latest version ?
Click to expand...
Click to collapse
Hello,
I missed the GMail upgrade :-|
Working fine after upgrading. You're the man!
Thanks for the tip and the super quick reply.
thanks
works perfectly
resul quadrant
cpu - 6809
mem - 2459
i/o - 1116
2d - 990
3d - 1612
total - 2597
with fly overclocking
you can do nothing for the market that does not load some app (antutu, amazon etc..)
I tried changing the build.prop but even if the device is seen from a google samsung, the app will still not be compatible
grazie
Hi, I need a root rom with a kernel that supports "loop devices". Does this kernel update support "loop device"? Thanks in advance.
Best.
Nice, this firmware worked.
But are you not allowed to factory reset after using this? After factory reset I can't boot anymore.
GPS now working
Thanks for this Surdu. Can confirm that both the Archos stock and this ROM are compatible with GPS now (I get instant locks). I am a happy man.
BTW, is the kernal you included all the G9 to overclock? I have a 4460 and am getting quadrant score of 1781 with a max and min @ 1.2 GHz (Performance Governor).
Thanks,
smithmal
thanks again for your work surdu
is it possible to activate the bootanimation? i remember that it works in earlier firmwares.
just GREAT !
http://www.jbmm.fr/?p=28311

Samsung Galaxy Ace GT-S5830i TeAm DiGiT ROM

This an outdated version.
I'll not respond to any queries regarding this outdated version!
All Featured New version [ROM & Kernel] Ace-i-Sure GT-S5830i XXLA2 by TeAm DiGiT is available on this thread
.
Samsung Galaxy Ace GT-S5830i TeAm DiGiT ROM v.1.0
.
Caution: This update should be strictly applied to the devices which are having the model number as ACE S5830i and is not for S5830 model. If you still continue to update in your S5830 model, then we should not be held responsible for any damage happened.
.
Disclaimer: Neither this website, nor developer should be held responsible for any damage happened to your device in the process of following the instructions mentioned in this article. It’s very unlikely that there will be any issues but just in case if at all there are any issues then we are committed to help you in solving the same.
I'm not responsible for bricking your phone but that probably wont happen..
.
Enable the USB Debugging in your Galaxy ACE S5830i from the path “Settings > Applications > Development > USB debugging”. The USB Debugging option should be ticked.
.
You have to download the rom (teamdigit.galaxy.ace.s5830i.v.1.0.zip - size:63 MB) and place it on your sd card.
.
-turn off your phone
-go into recovery mode (Home screen button + Power button + Volume up key)
-select apply update from sd card and select the rom zip file
-when it finishes installing, you need to do a factory reset
-reboot phone now
.
Enjoy New ROM!
.
Based on: Deodexed_DDLA2(XXLA2)_ace(s5830i) ROM
.
Kernel Used: [email protected] #1
Kernels: (GPL compliant Kernels are used)
You can use any kernel for this ROM. If you want support for Scripts, install kernel other than stock. Install the zip file via CWM.
Visit Kernel Source threads for more details,
Hells Fusion
[email protected]
nit Interactive
New Packages / (Replaced by Removed Packages):
-------------
ES File Explorer.apk
Folder Organizer.apk
MultiPicture Live Wallpaper-0.6.10.apk
Smart TaskSwitcher.apk
System Tuner 2.3.4.apk
Sense_Analog_Clock_Widget 36-3.6.1.apk
App Backup Restore-6-1.0.5.apk
AVG Antivirus.apk
Screenshot_It_3.03.apk
Jorte_Calendar_1.3.8.apk
Enhanced_Email_1.28.8.apk
TA Utility-5-1.4.apk
AudioManager Pro.apk
Perfect_Uninstaller_1.0.apk
bTunes.apk
.
Removed Packages:
-----------------
Dlna.apk, SamsungWidget_StockClock.apk, Forest.apk, Protips.apk, VoiceSearch.apk,
Dual Clock.apk, SamsungWidget_ProgramMonitor.apk, SamsungApps.apk, Swype.apk,
Calendar.apk, EmailWidget.apk, GenieWidget.apk, UnifiedInbox.apk,
thinkdroid.apk, Music.apk
.
Nothing new? Except the bloatware, that is?
Bugs?
anyone came across any bugs??
Too much crapware sry
which uses the music player in this rom?....
inviato dal mio Ace S-5830i con rom gingersandwich by qeemi
What languages ​​does it support ?
i don't know
inviato dal mio Ace S-5830i con rom gingersandwich by qeemi
Its a good start. Keep working on the good stuff and who knows your ROM might be the best one around. I say that because one of the best ROMs for 5830i (AceCream) had initially got similar comments as "Too much crapware sry" etc, but now That ROM has marked its importance by all its good features. I hope people stop discouraging anyone who is putting efforts for making the experience of using our device, a better one. Take the criticism positively and keep improving :good:
what languages are this ROM Support ??
am looking for Arabic language Support for this device :S :S
ANY Suggestion's !!! PLZ
osama_m2s said:
what languages are this ROM Support ??
am looking for Arabic language Support for this device :S :S
Click to expand...
Click to collapse
I have flashed some ROMs in languages I dont know and then installed Swype with the language packs I need. You can try that if Arabic isnt in the ROM you want.
Sent from my GT-S5830i using xda app-developers app
ican write in arabic buy i have issues with connecting chars with each other coz the language is like connecting chars this is an example
اسامة
how it with non multi lang rom
ا س ا م ة
About Languages Supported...
This ROM Supports all the built in Languages in the original ROM.

[ROM] Stock Archos ICS 4.0.4 | Firmware 4.0.25 | Root version !

Hi to evryone !
The last Archos update for 80/101 Gen9 ( 25/10/2012 ) : Android 4.0.4 Firmware 4.0.25 with Root access !
This Rom is based on unmodified Android system , Archos Firmware 4.0.25 !
This Rom can be installed only if you have already enabled SDE on your tablet .
Change log :
Android: IceCream Sandwich 4.0.4 version
Media Center: network indexing on network shortcut menu (+), network shortcuts creation is proposed on network share directory long press
Media Center: new simplified Movie/TV Shows/All Video views
Media Center Video: new video information view with backdrop display and chooser (click on backdrop to change it)
Media Center Video: poster can be changed by clicking on it in the video Information view
Video Scraper: faster media information retrieval process. Note that in the migration process, all your video scraper information will be lost.
Subtitles: ability to download and save subtitles for network shares
Media Center: add video search
Media Center Music: Album art swipe gesture support
Remote control: control your tablet with your TV remote through HDMI on TV compatible hardware (directional pad, multimedia and color TV remote keys)
Archos Remote: support of remote touch pad
Wi-Fi: new more robust driver
Media Center Video: fix audio desync for some MPEG4/AVI files
Media Center Video: fix MPEG PS/VOB audio track selection
Media Center Video: fix UPNP playback of large files (>4GB)
Media Center Video: fix seeking in some TS files
Media Center Video: fix playing certain MKV files
Media Center Video: fix playing certain H264 files
Media Center Video: improve DVD/VOB playback in case there are IFO files present
Media Center Video: add support for MPL2 subtitle format
Media Center Video: improve playback of H264/AAC TS files
& also ...
increase data I/O
enabled init.d* to run scripts
Download :
please download from here all necessary files :
archos.ext4.update
zImage
initramfs.cpio.lzo
Stock_Root_4.0.25.zip - 206.48 MB
Installation :
connect USB cable ;
unzip Stock_Root_4.0.25.zip into Stock_Root_4.0.25 directory
put archos.ext4.update from (Stock_Root_4.0.25) in your device, or > adb push archos.ext4.update mnt/storage/
go to recovery SDE and Remove android kernel if you have already installed any official firmware !
go to Flash kernel & Initramfs and copy here zImage and initramfs.cpio.lzo from (Stock_Root_4.0.25)
Ok ! ... & wait to boot !
* just put your favorite scripts in init.d directory , and reboot your device !
( no need extra settings ...my Rom takes care of them to make proper settings ! )
( ..also, keep in mind what scripts you use .... the stock busybox has limited applets !!! )
regard,
Surdu Petru
Wanted to be the first to say thanks. Your work is awesome.
PaTr10T said:
Wanted to be the first to say thanks. Your work is awesome.
Click to expand...
Click to collapse
Hi !
Thank you , for your THANKS !
Good luck ! :good:
Want to be the first to say merci
Sent from my ARCHOS 80G9 using xda app-developers app
solrakk6 said:
Want to be the first to say merci
Sent from my ARCHOS 80G9 using xda app-developers app
Click to expand...
Click to collapse
Hi ...
also ...merci beaucoup !
- you can install over 4.0.24, no worries !
& for data backup I'm afraid you need to use a application from PlayStore !
Good luck ! :good:
Why my gmail account dont show my event on calendar?
So at the moment its not possible make a full backup of my rom like with cwm right?!
And what's the best governor for save battery duration??
Sent from my ARCHOS 80G9 using xda app-developers app
Hi Surdu
Installed this rooted version, ran O.K. .I've reverted to Clean-Slim-Fast as I prefer the slimmed down version.
Best regards
hello j have a problem, I have installed the update 4.0.25 after a format and puts it impossible to install the SDE or go back to a 4.0.7 error 221, I do not understand s help you please. I precise that only official firmware 4.0.25 agrees to install s.
Message i try installed SDE in 4.0.25 : this firmware uptdate is too old for your hardware version (221)
Hi, plse just confirm i have do the good step (all work fine for me, i just want confirm all)
I have downgrade to 4.0.6, after temp root and install sde, i've install again the 4.0.6. After i installed the 4.0.7 (delete the kernel) with root and 4.0.24 with root too.
And now the 4.0.25
Is that the correct step?!
Facebook Group
Archos 80 G9
JOIN US--REJOIN NOUS--JUNTA-TE A NÓS!!
https://www.facebook.com/groups/110090702484588/
---------- Post added at 09:34 AM ---------- Previous post was at 09:03 AM ----------
muti642 said:
hello j have a problem, I have installed the update 4.0.25 after a format and puts it impossible to install the SDE or go back to a 4.0.7 error 221, I do not understand s help you please. I precise that only official firmware 4.0.25 agrees to install s.
Message i try installed SDE in 4.0.25 : this firmware uptdate is too old for your hardware version (221)
Click to expand...
Click to collapse
beter for you make a clean install and reinstall all !!
In your situation i tried uninstall sde,.. format all and install the 4.0.6 official and do all step again (root, sde..)
in other words i tried a clean install!
i tested your methode not work update failed (221) , my tablet is dead?
I'm going crazy I'm super archos hang on 4.0.25 and without SDE, I want to break the tablet in half so it makes me going crazy
So I managed to install j SDE via the old method, HE WAS time I lost patience.
I should be able to install the 4.0.25 root surdru but it does not always tells me why I can not go back to the old firmware.
surdru firmware Work sauved! Id like to know by what cons of this problem is
HI
what's the best GOVERNOR for save battery duration??
Decided today to root and install SDE my new Archos g9 8gb and install this rooted rom, unfortunately as I had applied the standard 4.0.25 firmware there was an error when trying to install the SDE.
I tried returning to stock 4.0.7 but that now reports it is too old for my rom.
Looks like Ill be staying on the standard rom for some time yet lol
TrOjAn
****UPDATE****
Reading back I saw muti642 had the same issue, after trying the OLD outdated method I have now been able to install SDE and the latest rom.. thanks all
solrakk6 said:
HI
what's the best GOVERNOR for save battery duration??
Click to expand...
Click to collapse
Hi!
You do the right steps for install the last firmware 4.0.25 !
If you have problem with any app, please uninstall apk and try to reinstal from PlayStore!
Also you need to check what governor is the best on savebattery! , for sure is not hotplug!
Good luck!
TrOjAnUK said:
Decided today to root and install SDE my new Archos g9 8gb and install this rooted rom, unfortunately as I had applied the standard 4.0.25 firmware there was an error when trying to install the SDE.
I tried returning to stock 4.0.7 but that now reports it is too old for my rom.
Looks like Ill be staying on the standard rom for some time yet lol
TrOjAn
****UPDATE****
Reading back I saw muti642 had the same issue, after trying the OLD outdated method I have now been able to install SDE and the latest rom.. thanks all
Click to expand...
Click to collapse
Hi!
What was the problem?
probleme is
surdu_petru said:
Hi!
You do the right steps for install the last firmware 4.0.25 !
If you have problem with any app, please uninstall apk and try to reinstal from PlayStore!
Also you need to check what governor is the best on savebattery! , for sure is not hotplug!
Good luck!
Hi!
What was the problem?
Click to expand...
Click to collapse
hello j have a problem, I have installed the update 4.0.25 after a format and puts it impossible to install the SDE or go back to a 4.0.7 error 221, I do not understand s help you please. I precise that only official firmware 4.0.25 agrees to install s.
Message i try installed SDE in 4.0.25 : this firmware uptdate is too old for your hardware version (221)
i tested your methode not work update failed (221) , my tablet is dead?
I'm going crazy I'm super archos hang on 4.0.25 and without SDE, I want to break the tablet in half so it makes me going crazy
So I managed to install j SDE via the old method, HE WAS time I lost patience.
I should be able to install the 4.0.25 root surdru but it does not always tells me why I can not go back to the old firmware.
surdru firmware Work sauved! Id like to know by what cons of this problem is
thought about reinstalling via playstore..
about battery save.. i will try thx again!
muti642 said:
hello j have a problem, I have installed the update 4.0.25 after a format and puts it impossible to install the SDE or go back to a 4.0.7 error 221, I do not understand s help you please. I precise that only official firmware 4.0.25 agrees to install s.
Message i try installed SDE in 4.0.25 : this firmware uptdate is too old for your hardware version (221)
i tested your methode not work update failed (221) , my tablet is dead?
I'm going crazy I'm super archos hang on 4.0.25 and without SDE, I want to break the tablet in half so it makes me going crazy
So I managed to install j SDE via the old method, HE WAS time I lost patience.
I should be able to install the 4.0.25 root surdru but it does not always tells me why I can not go back to the old firmware.
surdru firmware Work sauved! Id like to know by what cons of this problem is
Click to expand...
Click to collapse
So, now you have managed to install SDE, or not ?
( For Official Firmware you are not allowed to downgrade firmware ! On root version you can install any firmware you want ! )
solrakk6 said:
thought about reinstalling via playstore..
about battery save.. i will try thx again!
Click to expand...
Click to collapse
I had similar problems with some applications google owner, and I resolved by reinstalling ! :good:
( also for full compatibility please , first use English to see if is there some issue ! )
The best Governor for our tablet seems to be hotplug, is the only one who knows how to manage both processor cores !
...also you can take a look here ( Android CPU governors explained ! )
surdu_petru said:
Hi!
Hi!
What was the problem?
Click to expand...
Click to collapse
The problem was error 221 or 223 depending on where I was and what I was doing.. basically::
On a NON rooted Archos 8gb 101 I updated to the official 4.0.25 (which worked) and then I wanted to install SDE / Root.
I was unable to do either using the newest ( link here ) method but the OLD method ( link here ) worked, that then allowed me to install SDE and then a custom rom.
On a side note: Can anything be done to improve the audio volume? When I watch a movie I have to use earphones as the speaker volume is too low?
TrOjAn
surdu_petru said:
So, now you have managed to install SDE, or not ?
( For Official Firmware you are not allowed to downgrade firmware ! On root version you can install any firmware you want ! )
the problem was only after doing the update from 4.0.24 to 4.0.25 installing the SDE was no longer possible error code 221.
to solve it took Roote and install the sde of the old method (with adb), I have the install your room.
Click to expand...
Click to collapse
muti642 said:
surdu_petru said:
So, now you have managed to install SDE, or not ?
( For Official Firmware you are not allowed to downgrade firmware ! On root version you can install any firmware you want ! )
the problem was only after doing the update from 4.0.24 to 4.0.25 installing the SDE was no longer possible error code 221.
to solve it took Roote and install the sde of the old method (with adb), I have the install your room.
Click to expand...
Click to collapse
Ok !
I understand :good:
...but, I do not understand, why you need to reinstall SDE - as long as SDE does not uninstall single, after you perform a new update ....
Click to expand...
Click to collapse
just litle question.
Imagine now i run 4.0.25 root from surdu ... tomorrow i want restore all to the latest official firmware ..
Just need delete sde menu
format all and put the file to update?! and voila.. It's easy like that?!
I dont want comeback.. i like too much this version and rooted better still !!
just for knowledge
Congatulations for your work surdu without you was impossible have a clean stock rooted rom.

[Q] Calibration touchscsreen s-pen: Anyone got touchsreentune working with JB?

Hi,
last time I got touchscreentune working was with 4.0.3... and all the posts related to this app are a bit old.
Vitalij issued a new version on february 20, which he claims, supports XXLSZ official version.
I tried several configurations:
4.0.4 XXLRI (France) + PhilZ-cwm6-XXLRI-AUT-v3.99 : FC
4.1.2 XXLSA Ultimate v5 + PhilZ-cwm6-XXLSA-DBT-v3.99 : FC
4.1.2 XXLSC Ultimate v5.1 + PhilZ-cwm6-XXLSC-XJB-v3.99 : FC
4.1.2 XXLSZ official + PhilZ-cwm6-XXLSZ-OXA-v4.63 : app doesn't crash anymore but is very laggy and changing the offset parameters doesn't have any effect
4.1.2 XXLSZ official + PhilZ-cwm6-XXLSZ-OXA-v4.87.6 : app doesn't crash anymore but is very laggy and changing the offset parameters doesn't have any effect
4.1.2 UBLSF official + PhilZ-cwm6-XXLSZ-UBB-v4.87.6 : same as above
4.1.2 XXLSZ Team Union v4 + PhilZ-cwm6-XXLSZ-OXA-v4.87.6 :same as above
4.2.2 TeamPassion v2.3.3 + Kernel_CM10.1_20130225_n7000_CWM.zip *new mali* : app starts and doesn't lag but changing the offset parameters doesn't have any effect and I get the message: can't apply spen settings! No root permissions? Unsupported firmware? error string: insmod: init_module'/data/data/com.vital.tst.n7000/files/tstmodule.ko' failed (invalid argument)
4.2.2 TeamPassion v2.3.3 + Kernel_CM10.1_20130309_n7000_CWM.zip *new mali* : same as above
I have sent an email to vitalij but didn't get an answer (yet?).
Vitalij says in the app's description:
Custom kernels: app requires kernel with KALLSYMS, so ask developer of your kernel to include this in his config when building kernel: CONFIG_KALLSYMS=y, CONFIG_KALLSYMS_ALL=y
Click to expand...
Click to collapse
but I couldn't find any kernel specifying it does have KALLSYMS.
Currently running stunner v2.3.3, I tried this http://forum.xda-developers.com/showthread.php?t=1860384&highlight=touchscreentune (I'm left-handed) but it doesn't solve my problem, I still get an offset which makes it impossible to draw.
I also tried this http://phandroid.com/2012/12/05/how-to-adjust-s-pen/ but it doesn't solve my offset problem
I tried s-pen reset app https://play.google.com/store/apps/details?id=com.whitedavidp.reset.spen which seems to do the same thing and doesn't solve my problem
Finally I tried this calibration test app https://play.google.com/store/apps/details?id=com.livejournal.karino2.calibrationtest&feature which is a nice, simple, 5 points calibration method and it works !... but it is still under construction and I can't save changes... :crying:
So right now I'm a bit tired of trying things (anyway I don't have anymore ideas) and desperate, I initially bought my note in order to draw (that's my job) but I had to choose between draining my battery with 4.0.3 or get an actual mobile phone working.
I'd be very grateful if someone could provide me with some help.
Thanks and sorry for this long post but I wanted to show that I searched the web before posting my first message.
Hi. It worked for me on xxlsz and Philz. There is a bug though that you must change the y offset parameter for changes to take effect.
XxPixX said:
Hi. It worked for me on xxlsz and Philz. There is a bug though that you must change the y offset parameter for changes to take effect.
Click to expand...
Click to collapse
That's good to know but I switched back to my xxlsz backup, played around with the paramaters and nothing changed so far.
Could you be more specific (cause I'm not sure I have understood what you meant)?
Also, could you give some more details on the firmware+kernel you're running?
Thanks
Just to try to be more exhaustive I also found this post:
[I can't post outside links yet, so you'll have to look for "how-to-calibrate-galaxy-note-s-pen" on google]
which provides us with an interesting method to calibrate the touchscreen but unfortunately it is mentioning parameter in settings>display (gyroscope calibration, horizontal calibration) which are missing in xxlsz.
Also there is the service menu (which can be accessed by dialing *#0*# then menu s-pen test but its only purpose is to ensure that the s-pen is working and doesn't allow to calibrate anything.

NOTE 3 CAMERA for our S4 (i9506) "4.3 and 4.4.2" (4K + 1080p 60fps + 120fps) UPDATED

NOTE 3 CAMERA for our S4 (i9506) "4.3 and 4.4.2" (4K + 1080p 60fps + 120fps) UPDATED
Hello to All XDA-Members,
here you have a TUTORIAL to get the CAMERA from the NOTE 3 on our GALAXY S4 (i9506)
FOR 4.3 and 4.4.2 (OXEDED AND DESOXEDED ROMS) Updated 29/07/2014
--------------------------------------------------------------------------------------------------------------
- 4K Video (3840x2160) without 5min. time limit with 5min. time limit on 4.4.2
- Smooth motion (1080p 60 fps)
- Slow motion 720p with 120fps
- 100 JPEG quality without compression
- 256kbs Sound on each Video Mode (4K/1080p 60fps/30fps)192kbs on 4.4.2
The limitations for the 4.4.2 are, because of the Samsung Firmware , same with the 4.4.2 of the Note 3
--------------------------------------------------------------------------------------------------------------
Video MOD Installation 4.3 (MOD v.2)
1) First you have to install custom recovery and make root
2) Download the new MOD v.2 : https://mega.co.nz/#!JdsnRZDA!aO9OYImZBgLilCIDJbIJZqse-epVxRnW6ICThnPvr8Y
3) we go with root explorer or another system explorer: / system / app and we copy this folder in the APK Note 3 (Samsungcamera2.apk)
4) overwrite it and say OK
5 ) Now we go and delete the (Samsungcamera2.odex) (i9506 file),if you have desoxeded ROM you will not have this .odex File.
6) Without opening the camara, restart the phone
7) then we go to the camera app in menus and we will see the new video options
+
Sound MOD Installation (256kbs)
1) You have to install the new (MOD v.2)
2) search in : system/etc/ and overwrite : media_profiles.xml with this modified : https://mega.co.nz/#!4YMmjbpQ!1HKNWlEX5P_-joCCXymrM7jkU20Wpy1IbKOA8vABrZQ
Here the same file but uploaded to BOX : https://app.box.com/s/jest3obn61uaztybtc6o
3) restart phone and finished
-----------------------------------------------------------------------------------------------------------------------------------------------------------------
-----------------------------------------------------------------------------------------------------------------------------------------------------------------
-----------------------------------------------------------------------------------------------------------------------------------------------------------------
Video MOD Installation 4.4.2 (MOD v.3)
1) First you have to install custom recovery and make root
2) Download the new MOD v.3 : https://mega.co.nz/#F!hItWgbZb!Ncj7vpfZtSmbEApc-yBU2g
3) we go with root explorer or another system explorer: / system / app and we copy this folder in the APK Note 3 (Samsungcamera2.apk)
4) overwrite it and say OK
5 ) Now we go and delete the (Samsungcamera2.odex) (i9506 file),if you have desoxeded ROM you will not have this .odex File.
6) Without opening the camara, restart the phone
7) then we go to the camera app in menus and we will see the new video options
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
What works :
1) 4K at 30fps[/B] limitless (only on 4.3)(i have made an 11min. video that has a size of 4Gb)
2) 1080p 60fps ( simply amazing how good it looks and soft , no words)
3) slow motion 120fps (only one that look good is( x1/2) - same speed as Iphone 5s / fast camera all speeds
4) the remaining features both video and photos with their respective modes ( HDR , deletion , sound and shot) , tested all (until the exclusive Golf Note 3)
What does not work :
1) the front camera in beauty mode (all the rest work ) >>> with MOD v.3 and 4.4.2 it works
2) slow motion ( x1/4) / ( x1/8 ) look very pixelated *
3) previews of the filters (filter to choose sliding your finger in the camera mode ( I use INSTAGRAM ) >>> with MOD v.3 and 4.4.2 it works
4) Disp Surround Shot
5) Drama Mode >>> with MOD v.3 and 4.4.2 it works
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
*On the Note 3 it happens the same (with Stock 4.4.2), just have checked it on a Friend phone. So Slow-Motion works only fine on (x1/2). It must be SAMSUNG´s ROM error.
Here are some videos in 4K / 1080p 60fps / Slow Motion at 120fps ( x1 / 2) - and another Slow motion at 120fps ( x1 / 8 ) so you can see that in Slow Motion the only one who looks good is ( x1 / 2)
Here some Videos uploaded to YOUTUBE
1) Galaxy S4 i9506 4K (with MOD): http://youtu.be/7Mmhbh2pIZc
2) Galaxy S4 (i9506) 1080p 60fps (with MOD): http://youtu.be/HJs5JDteoII
3) Galaxy s4 i9506 SlowMotion (with MOD): http://youtu.be/SkjJZrzZPFA
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
- Program so that you can get an EFS backup , click Backup on the internal memory and you will have a folder with your EFS : https://mega.co.nz/#!8RFziDQD!XtHMBCGeK91_BdPjZcVwUyfCYq8iIvuVGByciMEq1zw (
One hug to all
And here the tipical sentence to could sleep peacefully : I do not take responsibility for any brick / Damage etc. that the terminal may suffer from following this method.
Can't download. have tried signing up even.
Here the APK
Grim1 said:
Can't download. have tried signing up even.
Click to expand...
Click to collapse
Hello Grim,
download it from here : https://mega.co.nz/#!mYNTTLzB!8jR-nRMWoTObk_EziJMIdjrBeL1KYpHmp9IKWhpDXJI
search the app folder and only copy the Samsungcamera2.apk, repeat : only this file
:good:
Can anyone explain what is Audio Zoom? How to check if it really works or not.
Hi, it doesn't work on GT-I9506... After reboot it is not possible to start camera app.
Ok. I will reply by myself: Audio Zoom doesn't work. It requires additional libraries. After that it start to work.
Actually, i don't know about compatibility with this Note3 version of Camera. I'm modding I9506 camera by adding/enabling missing features (including this mysterious audio zoom).
Modding I9506 camera
sorg said:
Ok. I will reply by myself: Audio Zoom doesn't work. It requires additional libraries. After that it start to work.
Actually, i don't know about compatibility with this Note3 version of Camera. I'm modding I9506 camera by adding/enabling missing features (including this mysterious audio zoom).
Click to expand...
Click to collapse
Hello Sorg,
once you have the modded i9506 camara it would be perfect if you could upload the camara.apk.
Thanks and best regards
......................................
Hey man one question, does it work on i9505 with stock 4.4.2?
Enviado desde mi GT-I9505 mediante Tapatalk
Any news Sorg ?
sorg said:
Ok. I will reply by myself: Audio Zoom doesn't work. It requires additional libraries. After that it start to work.
Actually, i don't know about compatibility with this Note3 version of Camera. I'm modding I9506 camera by adding/enabling missing features (including this mysterious audio zoom).
Click to expand...
Click to collapse
Hello Sorg,
do you have any news ? I think most of the i9506 owners are really excited if you could get all the missing features of our Stock Camara and could get a fully functional NOTE 3 cam working without any bugs.
Did you experimented the same bug that happend my i9506 camara, when enabled slowmotion on 1/4 and 1/8 the image get´s really pixelated ? It happend on a Note 3 with Stock 4.4.2 Firmware too. On Slowmotion 1/2 all seems fine, but it´s not as slow as on the Iphone 5s that seems to have allways 1/4.
Thanks and keep us informed :good:
RubenMMS2
Updated tutorial << 16/04/2014 >>
TUTORIAL :Note 3 Cam on Galaxy S4 i9506 (4K + 1080p 60fps + 120fps) Updated 16/04/2014
New Links with MEGA(camara apk + EFS Backup + Root Explorer
+ Uploaded YOUTUBE videos : 4K + 1080p 60fps + 120fps
Best regards
RubenMMS2
cant see 60fps, tried 1080p video but still 30fps..
sorg said:
Ok. I will reply by myself: Audio Zoom doesn't work. It requires additional libraries. After that it start to work.
Actually, i don't know about compatibility with this Note3 version of Camera. I'm modding I9506 camera by adding/enabling missing features (including this mysterious audio zoom).
Click to expand...
Click to collapse
Good News! !!!
Enviado desde mi GT-I9506 mediante Tapatalk
does it work on 4.4.2
lilmikey201 said:
does it work on 4.4.2
Click to expand...
Click to collapse
I have the 4.3 so i dont know if it works. As as i know there is no stock 4.4.2 Stock for our I9506...
About the 60fps it must work. You have to select smooth video. If you have the 4K option you must have the smooth video option.
Bye
carlounis said:
Good News! !!!
Enviado desde mi GT-I9506 mediante Tapatalk
Click to expand...
Click to collapse
To make audiozoom feature working you need to copy the file system/lib/lib_Samsung_AudioZoom_v100.so
from note3 to your phone.
Or have a look on my thread to make more features working
Can anyone confirm whether or not, the S4 can do 4k recording with this?
oc_masta said:
Can anyone confirm whether or not, the S4 can do 4k recording with this?
Click to expand...
Click to collapse
Just s4 (i9506)with snapdragon 800 can record/play 4k
Have you tried this? Can you show proof?
I know the OP has provided a youtube video, but this is big news and can't believe this thread is so quiet.
I would prefer this S4 over the new S5 if it has 4k recording.
RubenMMS2 said:
TUTORIAL :Note 3 Cam on Galaxy S4 i9506 (4K + 1080p 60fps + 120fps) Updated 16/04/2014
New Links with MEGA(camara apk + EFS Backup + Root Explorer
+ Uploaded YOUTUBE videos : 4K + 1080p 60fps + 120fps
Best regards
RubenMMS2
Click to expand...
Click to collapse
Hello, Im new with my i9506 and Ive got t-mobile version running on 4.3 and what I have to do if I want to flash this ? I cant find my oxeded rom and the end of my stock rom is BNA2..how can I root this flash oxeded rom ? where can I find it ? THANK YOU

Categories

Resources