[Q] Update My Galaxy Tab 7' P1000 - ICS - Galaxy Tab Q&A, Help & Troubleshooting

I already rooted with using superoneclick, and i wanna know how to install ICS on my tab please help me. (super user it there)
Model Number
GT-P1000
Firmware Version
2.3.3
Baseband Version
P1000XXJPZ
Kernel Version
2.6.35.7
[email protected]#2
Build Number
GINGERBREAD.XXJQ1
PLEASE TELL ME HOW TO UPDATE.

Go to http://www.teamovercome.net
Just in case you don't know, overcome is Gingerbread.
You only want overcome kernel as stepping stone so you have a cwm recovery.
Once you have cwm recovery, you can flash anything, including ics.
Since you are already on JQ1, I don't think you need to follow the whole flashing their stock safe rom, since it is also a JQ1.
just grab the overcome kernel 4.0 tar, and also download ics cm9 or aokp ( your pick, go thier individual thread and read up) and latest gapps, put them on sdcard.
I think you do factory reset first, then flash overcome kernel using Odin.
Then boot into cwm recovery by pressing volume up and power on at the same time.
From recovery flash ics and then flash gapps.
Sent from my GT-P1000 using XDA

Actually more choices of rom now, SGT7 ICS by cdesai (also recommended) and Gummy (not recommended for now seems very buggy, although it has better theme).
After following priyana's instruction,
Remember, as mentioned in each instruction on the perspective rom's thread,
You will get a strange 'recovery loop' as if it's failing to install. Just go back to recovery mode (power + volume up)
and reflash the ICS-ROM .zip file.
Welcome to the world of ICS.

thank you guys very much for the information. i am a noob and i really can't see anything how to do this.. please tell me step by step how to do that if so that will be very easy me to do.. i don't know anything about rooting but i already rooted it with superoneclick root and super user is there too i don;'t know what to do with it. please help me.

Have you even visited the site that I recommended?
To help you further,
Go to
http://forum.xda-developers.com/showthread.php?p=20974872
See the guy phloke posted a cached copy of the overcome guide.
Download it, it is a .PNG graphic file.
Read it ten times.
Follow that exactly, and let us know how it goes.
Edit: after that we talk about ics.
Sent from my GT-P1000 using XDA

cj.handy said:
I already rooted with using superoneclick, and i wanna know how to install ICS on my tab please help me. (super user it there)
Model Number
GT-P1000
Firmware Version
2.3.3
Baseband Version
P1000XXJPZ
Kernel Version
2.6.35.7
[email protected]#2
Build Number
GINGERBREAD.XXJQ1
PLEASE TELL ME HOW TO UPDATE.
Click to expand...
Click to collapse
goto this forum first page #1 http://forum.xda-developers.com/showthread.php?p=23097605. it will guide you...

ISC for my GT-p1000 at&t
priyana said:
Have you even visited the site that I recommended?
To help you further,
Go to
http://forum.xda-developers.com/showthread.php?p=20974872
See the guy phloke posted a cached copy of the overcome guide.
Download it, it is a .PNG graphic file.
Read it ten times.
Follow that exactly, and let us know how it goes.
Edit: after that we talk about ics.
Sent from my GT-P1000 using XDA
Click to expand...
Click to collapse
First, thank you for reading this. I had rooted & unlocked my at&t GT-P1000 using custom ROM 4.1.0 from teamovercom in January, 2012. Today, I like to something new and curiousity that can I install ICS custom ROM. But I am still not confident by reading from here: " http://rootzwiki.com/topic/22246-ro...ung-galaxy-tab-p1000ln-gsm-build-38-11062012/ " (please no quote). Now, I'm asking for your generousity and patient to show me what other steps I need to do to flash ICS custom ROM after follow teamovercome user guide, and my tab still able to make/receive call and I have now, thanks again. Pleae, please, and please reply to " [email protected] ".
Best regard,
Van.

you already have Overcome, so it is dead simple
- download ICS (CM9 or AOKP) and gapps-ics and put in external sd card.
- boot to download mode
- you need to use Odin to flash Overcome kerner tar
- once flashed the tab reboots.
- ignore the robotic voice, just force the tab to off
- boot to CWM recover (press vol-up and power )
- flash ICS (CM9 or AOKP)
- after flashing the system will convert your tab to MTD partition, but it will probably bring you to recovery or stuck at boot.
- force reboot to recovery again
- flash ICS again
- immediate after complete, flash gapps
- reboot
To go back to GB you need to do the Odin restock all over again though.

Related

[Q] ok new guy here please help !!!!!!!!

OK first i have googled it and have read many threads so plz dont tell me to do so
and im no noob i have a galaxy fit im jus trying to help my lucky friend who has a galaxy s
iv read around but jus thought ill ask
hes on complete stock here are the specs
model no - GT-I9000
Firmware version - 2.3.3
Baseband Version - I9000DDJV4
Kernel Version - 2.6.35.7- [email protected]#2
Build number - GINGERBREAD.DDJV6
now i wanna install darkyrom v10.2
so guys a little help in steps
thank u sooo much
1. Download Darkyrom(version).zip
2.Get into recovery mode(cwm)(Volume up+home+power)
2. Wipe Data/factory reset
3. wipe cache partition
4. Go to advanced->> wipe dalvik
5. Install zip from sd --->> darkyrom.zip
FINISH!!!
Edit: there are sites that says that you have to install the rom with odin, google a bit more, you don't want a bricked galaxy s
Best answer can be found on the Darky's website. Go to http://www.darkyrom.com/community/index.php and look for the rom you want to install and they have instructions on how to do it.
I would suggest trying Darky JVU it is the latest and in my opinion the best Darkyrom
bro he dosent even have cwm its complete stock i was thinking if i somehow gget rom manger to work atleast i cAN GIVE HIM CYANOGEN MOD DIRECTLY FROM ROM MANAGER DOWNLOAD REP
Download the latest stock firmware from the following link:
http://forum.xda-developers.com/showthread.php?t=1102881
Download Chainfire's CWM kernel (link below) for the firmware you installed from the link above.
http://forum.xda-developers.com/showthread.php?t=788108
Now that you have CWM, you can download and install the Darky firmware of your choice.
alaric.m said:
OK first i have googled it and have read many threads so plz dont tell me to do so
and im no noob i have a galaxy fit im jus trying to help my lucky friend who has a galaxy s
iv read around but jus thought ill ask
hes on complete stock here are the specs
model no - GT-I9000
Firmware version - 2.3.3
Baseband Version - I9000DDJV4
Kernel Version - 2.6.35.7- [email protected]#2
Build number - GINGERBREAD.DDJV6
now i wanna install darkyrom v10.2
so guys a little help in steps
thank u sooo much
Click to expand...
Click to collapse
http://www.darkyrom.com/community/index.php?threads/odin-darkyrom-10-2-resurrection-gt-i9000.4272/
the installation instructions are given in the link along with the download link..
this will give you darky rom 10.2 on your friend's phone which will be rooted along with CWM recovery.. after this you can install any rom which you want using the recovery and the instructions given in the op of the rom you chose.
alaric.m said:
bro he dosent even have cwm its complete stock i was thinking if i somehow gget rom manger to work atleast i cAN GIVE HIM CYANOGEN MOD DIRECTLY FROM ROM MANAGER DOWNLOAD REP
Click to expand...
Click to collapse
Bro look at the kernel name -.-
Just install semaphore kernel with odin by downloadin kernel and put in pda slot in odin. Put the phone into download mode by using vol down home and power. Plug phone in and hit start. Make sure you have the drivers installed(samsung kies) and it recognizes the phone. When its done flashing in about 10 seconds it will reboot. Now power down the phone and hold vol up home and power. That will bring you into cwm recovery. Make sure you have darky rom on sd card. Do factory reset and go to install zip from sd card and install darkyrom zip. It will then install and reboot. It will take a while so just wait. If it boot loops put it into recovery again and reflash the zip file again. Please hit thanks and happy flashing!
Sent from my GT-I9000 using XDA
Im curious, if your on 2.3.3, can you restore a 2.3.5 back up

(Q) Quick Guide on CM9 installation process

sup xda!?
I was trying to ask for this in the General Thread for CM9 but only found trouble..
After looking through the thread for over an hour, I still couldn't find a comprehensive guide on how to install CM9 on my device..
I know that you need PC-Odin for it, you need gapps and of course the zip of the ROM, but I just can't figure out what to flash, what Kernel to flash and how to..
As I saw many people asking about this, I think it would be greatly appreciated if one of you pros could spare the -minutes- it takes to give us noobs some info..
I am currently on the latest Stunner build and on the LP6-Kernel..
thanks for any help! peace
EDIT:
ok, copperdawgnc sent me to this thread:
http://forum.xda-developers.com/showthread.php?t=1424997
and told me:
"This will show you how to use PC ODIN & has GB roms to download"
so it seems that we need to use PC-Odin, as expected, and install a GB Rom first..
I know how to use Odin a bit but I still don't know what to install..
what Kernel, which ROM, any ROM? and do I really have to flash an unrooted stock and re-root..? why is that necessary?
p
Maybe this can be of some help:
http://jjpda.blogspot.com/2012/03/how-to-install-stock-odex-pre-rooted.html
nickshertzer said:
Maybe this can be of some help:
http://jjpda.blogspot.com/2012/03/how-to-install-stock-odex-pre-rooted.html
Click to expand...
Click to collapse
thanks!
so, it should go like this:
1 get ODEX PRE ROOTED N7000XXLC1 (Europe) or ODEX PRE ROOTED N7000DXLC2 (Malaysia)
2 install via PC-Odin
2.1 get PIT file and choose the 3 (?) files mentioned in the screenshot
3 after it's done: download Mobile ODIN
2. download CF-Root-SGN_XX_OXA_LC1-v5.3-CWM5.zip
3. load CF-Root kernel using Mobile Odin
4. get back into recovery
5. wipe data
6. install cm9 and gapps
7. wipe
8. done?
seriously?
wouldn't it work if we only install the CF-Root-Kernel LC1 (?) and flash CM9 from there through Odin?
LC1 or some other Kernel?
thx
Thanks for posting this question, MrKancho. I can't help, but have the exact same situation myself, with imilka's CM9 rom. Just want to confirm that the installation method you outlined works without any problems before trying it myself.
Thx
Sent from my GT-N7000 using XDA
You want to flash CM9 through Odin?
And how do you propose to flash a zip file using Odin?
:facepalm:
You flash CM9 and Gapps using CWMR.

First time root

Hey everyone so I have decided to root and upgrade my I9000 to ics for the first time, the reason being I want my phone to be faster, i want ics, and i want to escape the grips of touchwiz to try to stretch an extra year or two out of my phone
...
What I would like help with is a detailed guide on how to root/install/flash a good, EASY, solid, reliable ics rom,
I have looked around a little and there are so many different ics rims I am confused as to which is for me, I have heard a lot of positive about slimics,
I am basically looking for the best low risk root/upgrade,
Currently on JVU with KG3 csc (canada)
Thanks in advance for all your input
Sent from my GT-I9000 using xda app-developers app
Hi,
Go with the gospel for the i9000m (kg3 modem):
[HOWTO] Flashing CWRecovery to i9000m & upgrade to ICS AOSP 4.x ROM from any version
Then pick your custom ROM and follow their instructions precisely.
When changing ROM's you'll have to always reflash the cm7-kg3 modem. Updates within a ROM won't need a modem reflash each time.
Read, read, read again before doing what you are going to do and you'll be fine.
I followed the gospel, tried CM9 and now hooked on Slim ICS.
There are many differend roms out there, you can try almost any for I9000. It just depends what you prefer more.
When i rooted my phone and flash new rom, I was like (only 1 flash...), now i'am flashing a new rom every week. You just got to try.
Read guides a lot, and try oneclickroot for quick rooting(you can get it on xda forums)
Go slim, follow those instructions above for the i9000m.....then hop over to slim and follow instructions from website, any problems post on the thread and I will keep my eyes open for you
Edit.......just remember that when you first arrive on ics you won't have a modem so you will need to flash one from here
http://forum.xda-developers.com/showthread.php?t=1158783
[CM7/MIUI/ICS/CM9][06.01.12] Modems + Bootloaders(MD5)
Hi guys,
Yesterday i've tried to root my sgs froyo.zwjp6 using xxjw4 2.3.6 firmware. The process was successful and i turn off hp. When i try to do a recovery mode, it doesnt work. The phone goes black screen and appear GT-I9000. I reinsert the battery and try again but seems still. I forgot to enable usb debugging. Is it because of that my phone doesnt work?? Can anyone teach how to fix it?
The always helping guy
slaphead20 said:
Go slim, follow those instructions above for the i9000m.....then hop over to slim and follow instructions from website, any problems post on the thread and I will keep my eyes open for you
Edit.......just remember that when you first arrive on ics you won't have a modem so you will need to flash one from here
http://forum.xda-developers.com/showthread.php?t=1158783
[CM7/MIUI/ICS/CM9][06.01.12] Modems + Bootloaders(MD5)
Click to expand...
Click to collapse
Wow slap your very helpful. I was lurking on the Slim ICS thread and see your helpful post and help to the newcomers to ICS. Thanks for helping us noobs!
mr_yozo said:
Wow slap your very helpful. I was lurking on the Slim ICS thread and see your helpful post and help to the newcomers to ICS. Thanks for helping us noobs!
Click to expand...
Click to collapse
No problems mate, hope the instal went well/goes well
hey so after i flashed JVP according to the link titled..
[HOWTO] Flashing CWRecovery to i9000m & upgrade to ICS AOSP 4.x ROM from any version
when i turned my phone off i didn't get any connection to my carrier, so i flashed the KG3 csc back on and hoped that would fix it but it still didn't get any connection/service
so i was too timid to go further with the guide, i am reflashing JVU as i type...
any suggestions of what happened or why?
carmanj16 said:
hey so after i flashed JVP according to the link titled..
[HOWTO] Flashing CWRecovery to i9000m & upgrade to ICS AOSP 4.x ROM from any version
when i turned my phone off i didn't get any connection to my carrier, so i flashed the KG3 csc back on and hoped that would fix it but it still didn't get any connection/service
so i was too timid to go further with the guide, i am reflashing JVU as i type...
any suggestions of what happened or why?
Click to expand...
Click to collapse
You need to flash a modem from here
http://forum.xda-developers.com/showthread.php?t=1158783
[CM7/MIUI/ICS/CM9][06.01.12] Modems + Bootloaders(MD5)
slaphead20 said:
You need to flash a modem from here
http://forum.xda-developers.com/showthread.php?t=1158783
[CM7/MIUI/ICS/CM9][06.01.12] Modems + Bootloaders(MD5)
Click to expand...
Click to collapse
I have got the same problem. No service it says.
At which point do I need to flash? Instead of the CM9 nightly or do I just flash again after complete installation?
As the installation guide says:
1.)Download latest cm9 nightly or any ICS kernel (odin or cmw flashable), device_x.x.zip and Slim_Common.zip
2.)Enter CWM Recovery, Wipe data, Format System ( In Mounts and Storage)
3.)Flash CM9 nightly or any ICS kernel ( via odin or cwm).
4.)Reboot to recovery.
5.)Flash Device_x.x.zip***, then Slim_Common.zip.
6.)Reboot to system, Enjoy.
So in which step do I need to flash the CM9 Modem?
flash___ said:
I have got the same problem. No service it says.
At which point do I need to flash? Instead of the CM9 nightly or do I just flash again after complete installation?
As the installation guide says:
1.)Download latest cm9 nightly or any ICS kernel (odin or cmw flashable), device_x.x.zip and Slim_Common.zip
2.)Enter CWM Recovery, Wipe data, Format System ( In Mounts and Storage)
3.)Flash CM9 nightly or any ICS kernel ( via odin or cwm).
4.)Reboot to recovery.
5.)Flash Device_x.x.zip***, then Slim_Common.zip.
6.)Reboot to system, Enjoy.
So in which step do I need to flash the CM9 Modem?
Click to expand...
Click to collapse
Flash it after it has booted up, just go back to recovery, flash and you are good to go
Thank you for this answer.
One more thing.
I have flashed CM9 nightly just as said in the instruction.
But it is possible to flash a CM7 modem over it? Just like they are on this page : http://forum.xda-developers.com/showthread.php?t=1158783
flash___ said:
Thank you for this answer.
One more thing.
I have flashed CM9 nightly just as said in the instruction.
But it is possible to flash a CM7 modem over it? Just like they are on this page : http://forum.xda-developers.com/showthread.php?t=1158783
Click to expand...
Click to collapse
Yes, if you read they are for cm9 too

How To get Rid Of Froyo 2.2

my father has a stock samsung galaxy tab (p1) running the horrible android 2.2 with touchwiz all over it
he asked me to update the device so it can run ICS
i've done that with my SGS1 which was easy, but now i have a problem.
when reading the guide for installing cm9, its says "This guide applies to a Samsung Galaxy Tab (GSM) on the stock 2.3 release"
my sgs1 was already running 2.3.4, so i just followed the instruction and that was that, but my fathers tab is stuck on 2.2 and has never been rooted or anything
my question is can i simply just apply the steps or do i have to update the device to 2.3 and then follow the instruction
i cant afford to brick the device or i'll never hear the end of it, he love his tab as if it was his child or something
PS. I've learnt how to root the device using (superoneclick) and i've also found how to flash CWM on it, can i do that and then flash the CM9 Rom to it.
im sorry if missed a similar post somewhere but im still a noob at this and i really wanna do it (froyo + touchWiz is a recipe for a crappy device :silly: )
Use overcome method.
I am sure you have seen so many posts here with the same instruction
(many of them by me too)
http://www.teamovercome.net
Read the guide,
Missing pictures can be seen here.
https://docs.google.com/file/d/0B7k...EyNS00Yzg5LWE0MTktYmYyMjA1MThmYzQz/edit?pli=1
or
http://forum.xda-developers.com/showthread.php?p=20974872
Follow the picture step by step.
missing files at
http://tabfirmware.com/2012/01/romk...e-7-series-v4-1-0-♫-overcome-kernel-v4-0-0-♫/
and missing kernel here
http://forum.xda-developers.com/showpost.php?p=27801159&postcount=8
Basically to restock:
Download GB-stock-safe-v5.zip, unzip it and and flash with ODIN according to the guide.
Stop there and you will have Gingerbread
But since you want ICS, continue reading the guide.
- download ICS (CM9 or AOKP) and gapps-ics and put in external sd card.
- boot to download mode
- you need to use Odin to flash Overcome kerner tar
- once flashed the tab reboots.
- ignore the robotic voice, just force the tab to off
- boot to CWM recover (press vol-up and power )
- flash ICS (CM9 or AOKP)
- after flashing the system will convert your tab to MTD partition, but it will probably bring you to recovery or stuck at boot.
- force reboot to recovery again
- flash ICS again
- immediate after complete, flash gapps
- reboot
priyana said:
Use overcome method.
I am sure you have seen so many posts here with the same instruction
(many of them by me too)
http://www.teamovercome.net
Read the guide,
Missing pictures can be seen here.
https://docs.google.com/file/d/0B7k...EyNS00Yzg5LWE0MTktYmYyMjA1MThmYzQz/edit?pli=1
or
http://forum.xda-developers.com/showthread.php?p=20974872
Follow the picture step by step.
missing files at
http://tabfirmware.com/2012/01/romk...e-7-series-v4-1-0-♫-overcome-kernel-v4-0-0-♫/
and missing kernel here
http://forum.xda-developers.com/showpost.php?p=27801159&postcount=8
Basically to restock:
Download GB-stock-safe-v5.zip, unzip it and and flash with ODIN according to the guide.
Stop there and you will have Gingerbread
But since you want ICS, continue reading the guide.
- download ICS (CM9 or AOKP) and gapps-ics and put in external sd card.
- boot to download mode
- you need to use Odin to flash Overcome kerner tar
- once flashed the tab reboots.
- ignore the robotic voice, just force the tab to off
- boot to CWM recover (press vol-up and power )
- flash ICS (CM9 or AOKP)
- after flashing the system will convert your tab to MTD partition, but it will probably bring you to recovery or stuck at boot.
- force reboot to recovery again
- flash ICS again
- immediate after complete, flash gapps
- reboot
Click to expand...
Click to collapse
thanks a bunch, i'll download the stuff and see how it goes
wish me luck
one last question
when flashing the GB rom, i cudnt see the checked options in ODIN, it seems to me that all three options (auto partition, re-partition and i cudnt even read the last one) should be checked
yes, F. Reset Time (Force Reset Time)
all three checked
thank you so much priyana, and im soo sorry for being such a noob and wasting your time but pls bare with me
everytime i try to root the device using superoneclick the damn thing gets stuck on step no.5 (waiting for devices) is there a workaround this thing or maybe a different program, i've tried rooting my friends device using the same version of the program (his device is gt-i9100G) and it worked perfectly, why this idiot tab is giving me sooo much trouble
No need to root.
Just flash using Odin. Just start from page 7.
Rooting fix
priyana said:
No need to root.
Just flash using Odin. Just start from page 7.
Click to expand...
Click to collapse
thank you so much for your help , i was buzy the last few days but today i've done it, many thanx for your guidenese and taking the time to help a noob like me
as for the rooting i've managed to somehow get it to work
-disable the antivirus
-unmount the sd card
-download and run superoneclick
-click root
-taadaaaa
downgrade
priyana said:
No need to root.
Just flash using Odin. Just start from page 7.
Click to expand...
Click to collapse
can i downgrade from 4.0 to 2.3 by flashing the rom using odin, if its possible, what r the steps
ps im having some problems with the wifi in cm9
Hi, yes, same thing as before
use the guide, start from page 7 where the Odin screen shot is
GB-stock-safe, with pit file selected and "repartition" ticked.
But hang on, you are from middle east.
Do you have wifi cut out when a SIM card is inserted?
That is a known issue with middle eastern tab due to some wifi country code, that affects all Android 4.0
But I could be wrong, you may not have the issue.
Worth a try though:
http://forum.xda-developers.com/showthread.php?t=1445766
i am
and i've never heard about this before, it used to work ok before
all the phones in the house works ok witth the sim inserted connected to wifi
i'll give it a try anyway
back to plan B
i've downloaded a rom for saudi arabia (arabic language support) but the downloaded files is .tar.md5
how can i flash this one
Do try the fix anyway.
Sent from my GT-I9300 using xda app-developers app

Help getting cwm

Hey everyone, i currently own a rooted galaxy s i9000 that runs 3e recovery and a really buggy custom Israeli rom.
I would like to flash another rom but 3e needs rom verification or something like that so i can't really work through it.
I understand that i should use ODIN to flash CF-Root, but the rom has changed the build number somehow so i don't know which version to use.
Some info:
Android Number:2.3.3
Build NumberilotxRom JVH GINGERBREAD V1.1.2
If you could post a link to the right CF-Root and ODIN files i should use and some basic instructions i would be very grateful.
Thanks in advance, Daniel.
Download this "update.zip". Place it in your SD card. Power off and boot into recovery with the 3 button combination (press power, volume up and home button till you see the boot logo) and select "apply sdcard: update.zip". DO NOT DELETE THIS FROM SD. You should have CWM installed now. Let me know if you have any problem.
GendelD said:
Hey everyone, i currently own a rooted galaxy s i9000 that runs 3e recovery and a really buggy custom Israeli rom.
I would like to flash another rom but 3e needs rom verification or something like that so i can't really work through it.
I understand that i should use ODIN to flash CF-Root, but the rom has changed the build number somehow so i don't know which version to use.
Some info:
Android Number:2.3.3
Build NumberilotxRom JVH GINGERBREAD V1.1.2
If you could post a link to the right CF-Root and ODIN files i should use and some basic instructions i would be very grateful.
Thanks in advance, Daniel.
Click to expand...
Click to collapse
flash GingeBread 2.3.6(Maybe xxjvu or JW4) and flash cf-root.
you may follow this http://forum.xda-developers.com/showthread.php?t=2149455
to use custom rom GB 2.3.6 is a good start, if you want to flash cm10.1 i suggest after you flash CM7(GB) -> cm9 (ICS) ->CM10 (JB) to avoid lost imei.

Categories

Resources