[HELP!] Half-bricked my Droid 3 - Motorola Droid 3

I've had a Droid 3 for a little under a year now. For the past few months I was having an 'issue' where the phone would not vibrate when I got an SMS message. Apparently this is a known issue caused by installing a non-stock SMS app from the app-store. I took it to the Verizon store and the guy put in a request for a replacement phone. He knew I'd rooted it and just said to make sure I unroot it, uninstall the bootloader, and factory reset before sending it in. I did all 3 things however the reset didn't reset my custom boot animation so I figured I'd activate the phone real quick, reroot, change that, and unroot. I started the activation process and I get to the "Add Accounts" screen, added my Google account, and hit Done. It asks about location services, I hit "Next" and then com.motorola.setup crashes and I have to force close. If I hit the Home button it takes me right back to the "add accounts" screen and I'm stuck in that infinite loop. I can still receive texts and reply to them from the notifications menu, I can send and receive phone calls with voice commands, I can access the browser, but that's about it. I cannot get to the home screen and I cannot open the settings 'app'.
I brought it back to the Verizon store and they were baffled, told me that Verizon would probably charge me full retail for the replacement if I sent this once back, so I sent back the replacement phone and am stuck with this one now.
I think what caused this is that I had the 'Bloat Freezer' app installed and I had frozen a bunch of the default Verizon apps. I didn't unfreeze them before the factory reset and I have a feeling that's what's causing the issue. I had the idea to re-root the phone and install Bloat Freezer again from the Play store but the Play store isn't recognizing my Droid 3 anymore.
Any suggestions?

Factory reset is a deceiving term. It resets it to factory user data (none) and settings. It doesn't restore the system. What you need is an SBF to flash the entire phone to factory software, overwriting all partitions. First though, you must find which system you had. Since you didn't recently get this phone, did you accept an OTA update within the last month or so? If so, head over to the Dev area and download the stickied SBF file to return you from .906 to .890. If not, there is an SBF in the General area called Quick Unbrick or something like that.
http://www.youtube.com/watch?v=pcne9tFtBxY

Awesome! Thanks for the info. I'll give this a try when I get home from work tonight. Do you know if there's any way to tell what version I need without the settings app? Or perhaps if there's a way to forcibly open the Settings app?

If you've had your D3 for over a year and have not updated to .906, then you'll need .890. The .906 update is fairly recent (a couple months old I think?) so if you don't explicitly remember taking it, use .890.
Side note, check the rom you used before this happened. Check if it's based on .906 or .890.
Sent from my DROID3 using xda premium

JDiPierro said:
Awesome! Thanks for the info. I'll give this a try when I get home from work tonight. Do you know if there's any way to tell what version I need without the settings app? Or perhaps if there's a way to forcibly open the Settings app?
Click to expand...
Click to collapse
Do you know if you enabled USB debugging? (from settings->applictaions->development - check "USB debugging" on.) Many root apps require that.
Anyway, if you did, you can install the Android SDK's adb app and, from a command prompt, you can try to type the following command (with the phone on and cabled to the computer)
adb shell cat /system/build.prop | grep "version"
This should show you a bunch of lines, one of which will be "ro.build.version.full". The system version follows that text on the line - I have last month's OTA, so mine is Blur_Version.5.7.906.XT862.Verizon.en.US (so I have 5.7.906).
You can most easily get adb (for Windows) with instructions from here: http://dottech.org/tipsntricks/2153...ows-computer-for-use-with-your-android-phone/
After you get those files unzipped in c:\android, you can start a command prompt by hitting start, type "cmd" and enter in the search box - this will start a black command prompt window. From there, enter the command cd \android and then enter the adb command I put up above.
I'm not sure it will work, but it should.

You can bypass the activation. Starting with the top left corner, press each corner in a clockwise rotation. This will bring your phone to the home screen so you can then find which version it's on.

doogald said:
Do you know if you enabled USB debugging? (from settings->applictaions->development - check "USB debugging" on.) Many root apps require that.
...
adb shell cat /system/build.prop | grep "version"
Click to expand...
Click to collapse
What USB mode should the phone be in for this to work? I definitely had USB Debugging on before I did the factory reset; would that reset it though? When I try the command (minus grep, i'm in Windows unfortunately) I get 'error: device not found'
eww245 said:
You can bypass the activation. Starting with the top left corner, press each corner in a clockwise rotation. This will bring your phone to the home screen so you can then find which version it's on.
Click to expand...
Click to collapse
I had tried this but it still brought me straight to the "Add Accounts" screen, not to the home screen.

JDiPierro said:
What USB mode should the phone be in for this to work? I definitely had USB Debugging on before I did the factory reset; would that reset it though? When I try the command (minus grep, i'm in Windows unfortunately) I get 'error: device not found'
I had tried this but it still brought me straight to the "Add Accounts" screen, not to the home screen.
Click to expand...
Click to collapse
Needs to be I. Charge only mode. On stock rom I believe its called none
Sent from my XT860 using xda premium

JDiPierro said:
What USB mode should the phone be in for this to work? I definitely had USB Debugging on before I did the factory reset; would that reset it though? When I try the command (minus grep, i'm in Windows unfortunately) I get 'error: device not found'
Click to expand...
Click to collapse
You can grep: because you are running a shell command, I believe it is running on the phone, not on the windows computer.
(The grep is not all that critical, though, as I believe the version number line is one of the last lines displayed by that command.)
You can do an:
adb devices
before you run the shell command to verify that the computer and phone are communicating; it should return a line of characters that represents your phone, if it is connected.

Related

.621 Root Method - For new OTA Update

***Root method for .621 update***
THIS IS FOR USERS WITH THE .621 UPDATE ONLY. IF YOU HAVE NOT UPDATED DO NOT USE THIS METHOD.
*****DO NOT USE WINDOWS*****DO NOT USE RSDLITE*****
Instructs are made by Skelente
1.) Download the latest Ubuntu iso for your system. Most processors these days are 64 bit, but if you're running on an older computer or do not know if you have a 32 or 64 bit processor I'd recommend doing 32 bit just to be safe (64 bit processors can run both 32 and 64 bit distributions, but 32 bit systems cannot run 64 bit distributions.) Side note: you can download other distributions, but if you do you will not be able to create the persistent drive using the USB method. It should also be noted that some older systems cannot boot from USB, most newer systems (post 2000/2001 IIRC) can boot from USB, however you should consult Google to verify for your system.
2.) Burn the iso:
2.a If you have a cd burner and blank disc, this is the easiest method but, again, you will not have a persistent drive you will just have a Live CD. Use an iso burner to burn to cd, then skip to step 3a.
2.b If you do not have a burner, a blank disc (or don't feel like wasting a DVD disc) but have a free USB drive (with at least 2 GB of memory, bit overkill but it has to be big enough to hold the iso + changes + the persistent "drive") then I recommend downloading either unetbootin or universal USB installer. Go to either web site and follow their instructions. If you use Ubuntu, you'll have the option of creating a persistent drive, which is basically a fake-partition that allows you to save files to when you reboot Linux after running this Live USB. I would recommend using a persistent size of at least 200 mb so we can save the SBF file and sbf_flash. If you created a persistent drive go to step 4. If you opted out of this, skip to step 4.
3.a So you have a Live CD now. If you have a spare flash drive, load up the 604 SBF and sbf_flash. Either way, you'll need to proceed to booting into linux, go to step 4.
3.b Once the respective application has finished, copy the SBF and sbf_flash file to the persistent drive listed in windows.
4. Now we need to boot from your Live image. Restart your computer. When your computer is booting up it should give you two options, "Enter BIOS" and "Select Boot Order" or similar. For my Lenovo Laptop, I can hit F12 to change the boot order, and from there I can select my USB port and it'll boot from there. If you do not see a boot order option, you will need to go into your bios and change the boot order manually. Again, you will need consult Google for this as the menu selections vary by system. It really isn't that hard to figure out if you go through the menus, but I strongly, strongly, strongly recommend and encourage you to google your motherboard's manual to verify what you need to change if you don't know what you are doing. You are responsible for any changes you make on your system. Your BIOS is crucial for your system to function properly. Once you have found where to change your boot order, select the respective drive (USB, or your CD/DVD drive). These will be listed by the manufacture name (so SamsungXXXX for a Samsung drive or PNYXXXX if you're using a PNY usb stick.)
5. When Ubuntu boots up, it'll give you an option to run "Live" from the CD/USB. Select this option. Installing to your hard drive could mess up your current OS install, and I'm not going to get into partitioning here. Once you've gotten into Ubuntu, select "Dash Home" in the upper left hand corner, and then type terminal in the search box. Click terminal, then open it up.
6. Now you'll need to get to where ever you have the SBF and sbf_flash stored through the terminal. If you chose to use the boot cd, and did not have an available flash drive, you will need to download the SBF from here, as well as sbf_flash and then extract them to the same folder. The default is "Downloads" and I recommend just extracting them to that directory for simplicity.
6.a If you had to download the SBF/sbf_flash, getting there through terminal is rather easy. All you'll need to do is type these commands into the terminal:
cd Downloads
chmod +x sbf_flash
./sbf_flash mb809-2.3.5.sbf
And then let the program do it's work. When it's done, go to step 7.
6.b If you already copied the required files to a USB drive, we need to get there through terminal. Type these commands:
cd /
cd /media/
ls (This command will list all the drives connected to your system, cdrom, usb, etc. If you used the Universal USB installer it will list the USB drive as "PENDRIVE", I'm not sure what the default is for Unetbootin but you should be able to figure it out and if you just used a spare device it could be completely random.)
cd drivename (obvioiusly this will vary based on the USB method, for me its "cd PENDRIVE"
If your files were just on the main drive, you don't need to do anything else but the following commands. If you put them in another folder, you will need to do "cd foldername" without the quotes obviously. When you're in the directory with both the SBF and sbf_flash you will need to do these commands (again, ignoring the '-'):
chmod +x sbf_flash
./sbf_flash mb809-2.3.5.sbf
And then let the program do it's work. When it's done, go to step 7.
7.) After sbf_flash is done, you'll need to restart your computer. Its recommended you remove your boot media (cd or usb drive) so that Windows can boot normally. If you changed the boot order in bios you will need to change it back to what it was before, otherwise whenever you have a CD/USB stick plugged in your computer will automatically try to boot from it, and get pissy if it can't boot from the media.
8.) Once you're back in windows you'll need to run the zergrushv4 root method. From there you can do whatever you want. You still cannot SBF to previous versions (602 or 605) and you cannot run Froyo roms.
Downloads:
sbf_flash
SBF File & root tools
*HELP*
If you flashed with RSD Lite and have no data here is your options...
Flash stock .621 sbf and...
Switch devices on your account to reactivate the data
or
Call verizon to have them reporvision your data...
Once you are on the milestone system you can flash a custom rom.
You must SBF in Linux using sbf_flash, otherwise .604's radio will flash over .621's and your phone will no longer be able to take or place phone calls.
Edit: It may just be data, instead of phone capabilities. But still, flashing in Linux is much easier than having to spend time with Verizon's incompetent phone operators.
Sent from my Transformer TF101 using Tapatalk
If you SBF'd using RSD Lite, you flashed the 605 baseband over the 621. I didn't think this would mess up texts/phone calls but just your data connection, but correct me if I'm wrong I'm just going from memory (I had a dx2, just been watching the threads.) This was a big problem for the people over at rootz and they had a few different tactics on how to solve it. Some were able to call VZW and ask the tech support to "re-provision their data" although that was with mixed results (it depended who ya got on the phone, some people had no luck and other people had their data start back up no problems.) You would need to sbf back to 621 and call from a separate phone, however. Another user (skreelink) theorized that it was merely the AUTH code that was being messed up, and suggested that (for those with a secondary smart phone) you just go onto VZW.com, switch out phones for your number, wait 15 minutes, then go back to the website and switch back to your DX. I'm not sure if anyone has had any success with the latter but I know the former worked for a handful of people (with others getting tech support who had no idea what they were talking about.) If you call and don't get someone knowledgeable, I'd just cross your fingers and call back another time and hope you get someone different.
link not working
anyone have updated link that works to download this?
yea i learned about the radio the hard way, but i found a quick fix... maybe...
If you flashed with windows and now cant get data if you have a old smartphone that is compatible with you plan just go online and switch devices and then switch them back. Saves from having to call verizon But some people may not have a extra
I am probably one of those people who will also need to use this alternative root method but I have a question -
I have been recently acquainted to this dilemma on my "new" Droid X. I mistakenly started downloading the .621 update on my Droid X . I quickly realized what was happening and pulled the battery before the download was complete. (data disabled on phone) . I turned off my router. I reinstalled the battery and turned off all of the data on the phone. I tried clearing the cache but get a message the triangle that it will try to download it again. I pulled the battery and do not plan on powering up the phone with any data connection until I can get some clarification on what to do . The phone has little value to me if it can't be rooted . Is there anyway to stop the train at this point and go back to .605 ( i believe that was the previous one) . - Thanks
bamx2 said:
I am probably one of those people who will also need to use this alternative root method but I have question -
I have been recently acquainted to this dilemma on my "new" Droid X. I mistakenly started the downloading the .621 update on my Droid X . I quickly realized what was happening and pulled the battery before the download was complete. (data disabled on phone) . I turned of my router. I reinstalled the battery and turned off all of the data on the phone. I tried clearing the cache but get a message the triangle that it will try to download it again. I pulled the battery and do not plan on powering up the phone with any data connection until I can get some clarification on what to do . The phone has little value to me if it can't be rooted . Is there anyway to stop the train at this point and go back to .605 ( i believe that was the previous one) . - Thanks
Click to expand...
Click to collapse
If you disabled the download you are still on .605.
Turn your phone on, quickly root it with Pete's Motorola Root Tools, install Titanium Backup and freeze the "2.3.3 Updater" application.
Afterwards, reboot your phone and you should be golden.
Sent from my DROIDX using Tapatalk
nfazzdar - Thanks for the reply . I did a factory reset and that got rid of the yellow triangle. I then rooted as you suggested and installed TiBu . I really is too bad that M and V are pullin this cr#p .
I am going to update the post and host the files. There is also some extra stuff i will put up for download.
For people who don't want to pay for Titanium Backup to have the freeze feature, use a free app called gemini app manager.
Good to know. I think that I will also install OTA Rootkeeper as well.
deboyz1014 said:
For people who don't want to pay for Titanium Backup to have the freeze feature, use a free app called gemini app manager.
Click to expand...
Click to collapse
using linux mint and have a ?
I've followed everything, I believe, but when I run the commands in linux everything runs then it says "reboot into bootloader" and just sits there. I've tried doing it in bootloader and get a message 'waiting on phone:failed Are you root? Can someone steer me in the right direction I gotta get this phone on another ROM. Thanks in advance.
BRANDENDEUCE said:
I've followed everything, I believe, but when I run the commands in linux everything runs then it says "reboot into bootloader" and just sits there. I've tried doing it in bootloader and get a message 'waiting on phone:failed Are you root? Can someone steer me in the right direction I gotta get this phone on another ROM. Thanks in advance.
Click to expand...
Click to collapse
Exactly the same problem here too.
Sent from my HTC Flyer P510e using XDA
landonotis said:
Exactly the same problem here too.
Sent from my HTC Flyer P510e using XDA
Click to expand...
Click to collapse
You need to either:
Code:
sudo su
./sbf_flash
or
Code:
sudo ./sbf_flash
Note: if using
Code:
sudo su
be sure that the terminal shows a "#" instead of a "$" after you input the command. This shows that you are root.
Sent from my DROIDX using Tapatalk
infazzdar said:
You need to either:
Code:
sudo su
./sbf_flash
or
Code:
sudo ./sbf_flash
Note: if using
Code:
sudo su
be sure that the terminal shows a "#" instead of a "$" after you input the command. This shows that you are root.
Sent from my DROIDX using Tapatalk
Click to expand...
Click to collapse
When exactly do we need to input the code? I am assuming this is in terminal on linux?
BRANDENDEUCE said:
When exactly do we need to input the code? I am assuming this is in terminal on linux?
Click to expand...
Click to collapse
Sorry for not specifying, but you assume correctly.
Sent from my Transformer TF101 using Tapatalk
What roms can we use now?
Now that we have root and su on the droid x/milestone what roms are we able to flash? I know they can't be froyo based but do they now have to be related to the milestone roms, droid x, or both? I've tried a few and it's always an abort so I'm just needing some direction here...
BRANDENDEUCE said:
Now that we have root and su on the droid x/milestone what roms are we able to flash? I know they can't be froyo based but do they now have to be related to the milestone roms, droid x, or both? I've tried a few and it's always an abort so I'm just needing some direction here...
Click to expand...
Click to collapse
I believe this thread will be of help to you. =D
http://rootzwiki.com/index.php?/topic/21337-[ROMS]-Multi-ROM-Thread---Blur-Based-ROMs-for-those-on-.621/.604!
Sent from my DROIDX using Tapatalk 2 Beta-5
This worked great.
Any cwm kernels are we able to use?
Just wondering if we can flash custom kernels since we can do roms? If so any help would be appreciated.

4X extremely slow after rooting/reboot

So, I followed the guide we all did here:
http://forum.xda-developers.com/showthread.php?t=1818502
And before someone asks: I have deleted the Backup app (IS11LG_SystemBackupTest.signed.apk) we had to install during rooting after the phone was rooted.
The phone then happily ran, rooted. SUpersu was installed/updated, the phones root check said it's all perfect, I was a happy camper. But today I had to reboot it. I can't say if it was the first reboot after rooting, sadly. The phone boots up, arrives at the lockscreen (some colorful defaultthing, before I get to see my GO Locker screen after login), and then stops being responsive, it basically at first feels like it's not reacting at all. Some things are responsive, strngely ... I get accurate sounds when touching the screen for instance. If I then wait, I eventually get to the SIM Unlock ... which is also totally unresponsive, it will maybe show two digits, then freezes up. Strangely, I could type the remaining digits and hit OK and the SIM would unlock ... but the screen no longer showed what I typed. I then arrive at GO locker, can unlock it (sluggish and slow again) and finally am properly logged in, but still totally sluggish and slow. Needles to say it's a pseudobrick that way, unusable.
What's going on and what could I check?
Please try the following:
alexp999 said:
REALLY SLOW AFTER ROOT?
Remove the "SystemBackupTest" app, if you haven't already.
On your phone, go to "Settings -> Developer options" and make sure "USB debugging" is TICKED
Connect your phone via USB to your computer.
Open a command prompt (may need admin privelages, right click, run as administrator)
Type without quotes "cd C:\o4xr" and press enter.
Type without quotes "adb shell rm /data/local.prop" and press enter.
Type without quotes "adb reboot" and press enter.
Click to expand...
Click to collapse
alexp999 said:
Please try the following:
Click to expand...
Click to collapse
Thanks, that fixed it! It's not easy to do, as the scrolling lists do not work, either, and you can't seem to get to the developer options, it won't scroll. Strangely enough "internally" it seems to do things ... if you re-enter the options, they're down to the end of the list, it looks like it doesn't update the screen properly (much like when I had to enter the SIM code).
Anyway, it's fast again, whew ... I was scared. What is the local.prop thing, if I may ask?
voon said:
Thanks, that fixed it! It's not easy to do, as the scrolling lists do not work, either, and you can't seem to get to the developer options, it won't scroll. Strangely enough "internally" it seems to do things ... if you re-enter the options, they're down to the end of the list, it looks like it doesn't update the screen properly (much like when I had to enter the SIM code).
Anyway, it's fast again, whew ... I was scared. What is the local.prop thing, if I may ask?
Click to expand...
Click to collapse
I'm not entirely sure, I just know it gives us temp root for the rest of the root script to run.
Hm, so its' not a systemwide ini file or so, that existed before ... it was created during the above rooting process and was an undesired leftover from it? I'm always a bit worried if I delete something with such an unspecific name in the OS
voon said:
Hm, so its' not a systemwide ini file or so, that existed before ... it was created during the above rooting process and was an undesired leftover from it? I'm always a bit worried if I delete something with such an unspecific name in the OS
Click to expand...
Click to collapse
Its actually created by the SystemBackupTest app.
The script then removes it just before issuing a reboot.
The only way it can come back, is if you accidently open that app again before uninstalling it.
alexp999 said:
Its actually created by the SystemBackupTest app.
The script then removes it just before issuing a reboot.
The only way it can come back, is if you accidently open that app again before uninstalling it.
Click to expand...
Click to collapse
I see, I might have done that ... good to know. Anyway, great that it works again, thanks again
laggy phone
My lg 4x hd is very slow after root...
I just tried to make this few steps above, but I got this message.
Any idea what to do?
Pls help me!
THX
66aaa
66aaaa said:
My lg 4x hd is very slow after root...
I just tried to make this few steps above, but I got this message.
Any idea what to do?
Pls help me!
THX
66aaa
Click to expand...
Click to collapse
It looks like you have either plugged in more than one android device, or you have an android emulator (from the SDK I guess) running. Unplug all USB devices (except keyboard and mouse) and then try again. Good luck!
If you have an emulator running try "adb -d shell rm /data/local.prop"
Edit: To see all adb-devices type "adb devices". This will return a list of all adb-devices connected (emulators + usb devices)
Dexxon said:
If you have an emulator running try "adb -d shell rm /data/local.prop"
Edit: To see all adb-devices type "adb devices". This will return a list of all adb-devices connected (emulators + usb devices)
Click to expand...
Click to collapse
I still don't understand and hope you do it...
THX for your help!
As you can see the same device is listed two times. Restarting the adb server may help. Just type "adb kill-server" and than launch the second command from your screenshot. Maybe this works.
Dexxon said:
As you can see the same device is listed two times. Restarting the adb server may help. Just type "adb kill-server" and than launch the second command from your screenshot. Maybe this works.
Click to expand...
Click to collapse
This is the result...what to do know?
THX
The devices is detected and the command is executed, but the file does not exist. Make sure that there is a file "prop.local" at /data. If not, you may have a different problem.
Maybe you have an emulator running or Bluestacks installed... Uninstall Bluestacks...
I don't think that this is the case as the device shows up with a serial number in the "adb devices" list.
To be sure it is the correct phone you could compare the serial number shown in the list with the serial number of your phone (you might find this information in settings -> about phone).
Dexxon said:
The devices is detected and the command is executed, but the file does not exist. Make sure that there is a file "prop.local" at /data. If not, you may have a different problem.
Click to expand...
Click to collapse
I don't have in the system/data "prop.local" file...sure....
What is emulator and Bluestacks?
I really don't understand this problem I have...
Could you help me pls?
THX
66aaaa said:
I don't have in the system/data "prop.local" file...sure....
What is emulator and Bluestacks?
I really don't understand this problem I have...
Could you help me pls?
THX
Click to expand...
Click to collapse
An emulator is a program which emulates Android so you can execute Android-Apps on your PC. BlueStacks is an emulator. It may show up as an adb devices, but this is not the case here.
Back to your problem: Are you sure the rooting process worked?
Did you reboot your phone after rooting?
I didn't root my phone under ICS so I don't have any experience with this
no one raised this question to confirm or did this info was provided anywhere
What version of ROM? ICS V10x? JB V20x? User could had used the wrong guide.
Best way out is to do a reflash and retry rooting if all fails.
Dexxon said:
An emulator is a program which emulates Android so you can execute Android-Apps on your PC. BlueStacks is an emulator. It may show up as an adb devices, but this is not the case here.
Back to your problem: Are you sure the rooting process worked?
Did you reboot your phone after rooting?
I didn't root my phone under ICS so I don't have any experience with this
Click to expand...
Click to collapse
I dont't have this Bluestacks emulatur, sure...
I have Superuser working properly on JB V20 stock ROM. The only thing it is very slow sometimes, Thats why I tried to make the process above...
I made the root few month ago...and rebooted many times since than...
Any idea what to do now?
THX

[Q] ADB device unauthorized, no root, can't figure it out?

Hey, all. So, I just got a Moto X through AT&T, and I'm looking to root it. It came with the 4.4 update already on it, so I've been trying to follow the appropriate guides from jcase, but I'm running into an error very early on. After I download the ADT bundle and get adb installed and have it up and running, I was at first finding that my device wasn't showing up when I did the command "adb devices". I fixed this by getting the drivers from motorola with their device manager download, but...
Now I'm getting it showing up as an unauthorized device. I have USB debugging enabled, to start. I never received an authorization option when plugging my phone into my computer. I have it set to PTP, not MTP. I've tried toggling the USB debugging off and on multiple times, I've tried the revoke usb debugging authorization multiple times, and I've gone through and deleted the .android folder in C->Users->me. Since I don't have root, I can't go through and delete any sort of folder in my phone involving adb, because I saw that a lot as I've been doing google searches on how to try and fix this before posting here. One of my attempts when deleting .android involved me unplugging my Moto X, deleting the .android folder, running adb kill-server and then adb start-server commands, and rebooting my Moto X before plugging it back in. I still have never received an option to authorize my device.
I am running on Windows 8.1, if that makes any difference. I checked my adb version using the command, and it shows me running adb version 1.0.31. I am rather new to playing around with phones and whatnot, and all of the things I have tried were things that I found through google searches that pointed me to threads here at XDA. I'm willing to try pretty much anything, and I will report back and give further information if needed.
Thanks in advance, all
Xenther said:
Hey, all. So, I just got a Moto X through AT&T, and I'm looking to root it. It came with the 4.4 update already on it, so I've been trying to follow the appropriate guides from jcase, but I'm running into an error very early on. After I download the ADT bundle and get adb installed and have it up and running, I was at first finding that my device wasn't showing up when I did the command "adb devices". I fixed this by getting the drivers from motorola with their device manager download, but...
Now I'm getting it showing up as an unauthorized device. I have USB debugging enabled, to start. I never received an authorization option when plugging my phone into my computer. I have it set to PTP, not MTP. I've tried toggling the USB debugging off and on multiple times, I've tried the revoke usb debugging authorization multiple times, and I've gone through and deleted the .android folder in C->Users->me. Since I don't have root, I can't go through and delete any sort of folder in my phone involving adb, because I saw that a lot as I've been doing google searches on how to try and fix this before posting here. One of my attempts when deleting .android involved me unplugging my Moto X, deleting the .android folder, running adb kill-server and then adb start-server commands, and rebooting my Moto X before plugging it back in. I still have never received an option to authorize my device.
I am running on Windows 8.1, if that makes any difference. I checked my adb version using the command, and it shows me running adb version 1.0.31. I am rather new to playing around with phones and whatnot, and all of the things I have tried were things that I found through google searches that pointed me to threads here at XDA. I'm willing to try pretty much anything, and I will report back and give further information if needed.
Thanks in advance, all
Click to expand...
Click to collapse
i also use mine on MTP but im running win7
issue def sounds like you did not allow the connection. have you tried uninstalling the drivers in device manager for the phone restarting and letting windows reinstall them and see if you can get the toast on your phone and accept it.
if that fails i would try competley reinstalling everything or trying another computer, another cable, another port.
dray_jr said:
i also use mine on MTP but im running win7
issue def sounds like you did not allow the connection. have you tried uninstalling the drivers in device manager for the phone restarting and letting windows reinstall them and see if you can get the toast on your phone and accept it.
if that fails i would try competley reinstalling everything or trying another computer, another cable, another port.
Click to expand...
Click to collapse
I tried PTP because people were saying that they were having better luck with phones in PTP, not MTP. I haven't tried uninstalling the drivers yet, which might be the issue. I tried initially just plugging my phone in before I downloaded the Motorola Device Manager program, so I'll try going through and uninstalling the drivers, and the MDM program, and then reinstalling (when I get home from work).
I'll try another port, and I can also try another computer, so I'll also do that when I get home. Thanks for your response, and I'm really hoping this works :good:
Xenther said:
I tried PTP because people were saying that they were having better luck with phones in PTP, not MTP. I haven't tried uninstalling the drivers yet, which might be the issue. I tried initially just plugging my phone in before I downloaded the Motorola Device Manager program, so I'll try going through and uninstalling the drivers, and the MDM program, and then reinstalling (when I get home from work).
I'll try another port, and I can also try another computer, so I'll also do that when I get home. Thanks for your response, and I'm really hoping this works :good:
Click to expand...
Click to collapse
i looked threw a couple threads of people having this issue. this is the order i would troubleshoot myself one other thing i have read is something about unsigned drivers which i dont think you should be having any issues with it but if you ever see a window that states about unsigned drivers reboot your PC while tapping F8 and tap the down arrow till you highlight Disable driver signature required i think is what it says and see if that helps
1. drivers only(make sure you restart after you remove the drivers and make sure you check the box for delete drivers)
2. different port
3. different cable
4. complete reinstall of adb and everything.( also restart after you uninstall everything.)
5. different computer (or use virtual PC if you don't have another PC)
6. re post here lol
Hope this all helps man
dray_jr said:
i looked threw a couple threads of people having this issue. this is the order i would troubleshoot myself one other thing i have read is something about unsigned drivers which i dont think you should be having any issues with it but if you ever see a window that states about unsigned drivers reboot your PC while tapping F8 and tap the down arrow till you highlight Disable driver signature required i think is what it says and see if that helps
1. drivers only(make sure you restart after you remove the drivers and make sure you check the box for delete drivers)
2. different port
3. different cable
4. complete reinstall of adb and everything.( also restart after you uninstall everything.)
5. different computer (or use virtual PC if you don't have another PC)
6. re post here lol
Hope this all helps man
Click to expand...
Click to collapse
Thanks again, so much, for all this! I'll go through all of these in about... two hours or so. I'll report back regardless of the outcome. You're awesome for this! :highfive:
No problem man hope it fixes your problem
Sent from my XT1056 using xda app-developers app
dray_jr said:
i looked threw a couple threads of people having this issue. this is the order i would troubleshoot myself one other thing i have read is something about unsigned drivers which i dont think you should be having any issues with it but if you ever see a window that states about unsigned drivers reboot your PC while tapping F8 and tap the down arrow till you highlight Disable driver signature required i think is what it says and see if that helps
1. drivers only(make sure you restart after you remove the drivers and make sure you check the box for delete drivers)
2. different port
3. different cable
4. complete reinstall of adb and everything.( also restart after you uninstall everything.)
5. different computer (or use virtual PC if you don't have another PC)
6. re post here lol
Hope this all helps man
Click to expand...
Click to collapse
So, I've done everything in this list, and also added trying forums.motorola.com/posts/caa12135bd?commentId=725256#725256 out. I'm pretty much out of ideas, because everything I've searched showed pretty much everything you've suggested (and that I tried!) as suggestions
I appreciate the help, but so far (at this rate), I think I might just not have to root. This is super frustrating to me!
EDIT: Actually, I think I finally have something here! After hooking it up to another computer, installing the adk and everything, making sure all the drivers showed up as installed correctly and getting nothing I pretty much resided to giving up. I, for whatever reason, decided to try and run adb. After I did, and ran the start-server command, it gave me the window to accept my laptop's fingerprint! Finally on to follow the rest of the guides!
Thanks!!!
Second edit: So, proceeding to step 3 or so in RockMyMoto, I'm encountering another issue. When running Impactor and trying to run telnet on port 2222 or whatever that is, I get an error that says Signature Bugs unavailable. If I'm understanding correctly, I have to do everything in this guide to downgrade to 4.2.2 or whatever the version with the camera update is, because there isn't a root available for 4.4 without downgrading. But now I'm seeing that I somehow need to downgrade from 4.4 to the previous version in order to get Impactor/telnet working correctly?
I'm super lost now :C
well in order to root 4.4 you have to downgrade to 4.2.2 camera update. if your not sure on how to do it here is a link to a video on how to do it
http://forum.xda-developers.com/showthread.php?t=2446515
and if you are having issues with telnet here is a guide that might help
http://forum.xda-developers.com/showthread.php?t=2509676
if after reading that if you are still lost i can setup remote access via Teamviewer and show you how to do it. but only if you are comfortable with it.
dray_jr said:
well in order to root 4.4 you have to downgrade to 4.2.2 camera update. if your not sure on how to do it here is a link to a video on how to do it
http://forum.xda-developers.com/showthread.php?t=2446515
and if you are having issues with telnet here is a guide that might help
http://forum.xda-developers.com/showthread.php?t=2509676
if after reading that if you are still lost i can setup remote access via Teamviewer and show you how to do it. but only if you are comfortable with it.
Click to expand...
Click to collapse
So I'm going to work on downgrading to 4.2.2 camera update right now. Thanks for all these links and offers for help :good:. I'll report back, hopefully with a successful root
EDIT: A question for you. Am I able to run my phone in ART runtime after I root it, should I stay in dalvik or w/e it is, or does it not matter?
Xenther said:
So I'm going to work on downgrading to 4.2.2 camera update right now. Thanks for all these links and offers for help :good:. I'll report back, hopefully with a successful root
EDIT: A question for you. Am I able to run my phone in ART runtime after I root it, should I stay in dalvik or w/e it is, or does it not matter?
Click to expand...
Click to collapse
i wouldn't see why not but i am not sure
26344422579
dray_jr said:
i wouldn't see why not but i am not sure
Click to expand...
Click to collapse
Alright, cool. I'll make a backup after I'm done with everything and try it out. Maybe do some poking around here first, see if it came up at all.
I've hit a few snags, but so far I've figured everything out. I'm working on doing SlapMyMoto right now, which is the last step for root and to be on 4.4, yeah?
Xenther said:
Alright, cool. I'll make a backup after I'm done with everything and try it out. Maybe do some poking around here first, see if it came up at all.
I've hit a few snags, but so far I've figured everything out. I'm working on doing SlapMyMoto right now, which is the last step for root and to be on 4.4, yeah?
Click to expand...
Click to collapse
correct
dray_jr said:
correct
Click to expand...
Click to collapse
I didn't want to bug you with this, so I had made a post over in the SlapMyMoto thread, but I'll put it up here. If you don't wanna bother, I'll hang around in the SMM thread and wait for a response.
"I've done everything from 1-3, including accepting and installing the OTA update to 4.4. I'm trying to run the last command in step 4, the adb shell stuff, but literally nothing is happening. I still have access from motowpnomo, I checked using the write_protect command, and it is still showing a "0" I don't know what to do at this point, though.
USB Debugging is on, adb devices shows my phone as being connected correctly
This is a screen cap of what my command prompt shows after I input that command from step 4
http://i.imgur.com/WeekMAf.png
Any suggestions?"
Xenther said:
I didn't want to bug you with this, so I had made a post over in the SlapMyMoto thread, but I'll put it up here. If you don't wanna bother, I'll hang around in the SMM thread and wait for a response.
"I've done everything from 1-3, including accepting and installing the OTA update to 4.4. I'm trying to run the last command in step 4, the adb shell stuff, but literally nothing is happening. I still have access from motowpnomo, I checked using the write_protect command, and it is still showing a "0" I don't know what to do at this point, though.
USB Debugging is on, adb devices shows my phone as being connected correctly
This is a screen cap of what my command prompt shows after I input that command from step 4
http://i.imgur.com/WeekMAf.png
Any suggestions?"
Click to expand...
Click to collapse
everything looks fine bro just finish the last command and then run root checker you should be fine.
i know when i ran mine nothing happened also, after the last command wait a few mins if nothing happens toggle Bluetooth like is says and if it does not restart then restart the phone and you should be good if not we will figure it out
i might downgrade just to run back threw it to see if i can figure it out and maybe put together a package for you that i know works. but i am on the sprint X
dray_jr said:
everything looks fine bro just finish the last command and then run root checker you should be fine. i know when i ran mine nothing happened also, after the last command wait a few mins if nothing happens toggle Bluetooth like is says and if it does not restart then restart the phone and you should be good if not we will figure it out
Click to expand...
Click to collapse
I'm confused again; when I run the last command (I literally just copypasted the entire fourth step command into my command promt), I get an error.
http://i.imgur.com/yr11VjL.png
Screenshot of after I type in the last command
I'm about to head out to work, so I'll be able to work on this later tonight, but if you have any suggestions I would be super appreciative (not to say that I already am not!)
Xenther said:
I'm confused again; when I run the last command (I literally just copypasted the entire fourth step command into my command promt), I get an error.
http://i.imgur.com/yr11VjL.png
Screenshot of after I type in the last command
I'm about to head out to work, so I'll be able to work on this later tonight, but if you have any suggestions I would be super appreciative (not to say that I already am not!)
Click to expand...
Click to collapse
no no do them one by one
adb shell
enter
cp /sdcard/install.sh /data/local/tmp/install.sh
enter
chmod 755 /data/local/tmp/install.sh
enter
echo "/data/local/tmp/install.sh" > /sys/kernel/uevent_helper
enter
and the device should restart
im running a nandroid backup as we speak and im going to revert back to the 4.2.2 camera update and run threw it again see if i can't figure out what is hanging u up.
dray_jr said:
no no do them one by one
adb shell
enter
cp /sdcard/install.sh /data/local/tmp/install.sh
enter
chmod 755 /data/local/tmp/install.sh
enter
echo "/data/local/tmp/install.sh" > /sys/kernel/uevent_helper
enter
and the device should restart
im running a nandroid backup as we speak and im going to revert back to the 4.2.2 camera update and run threw it again see if i can't figure out what is hanging u up.
Click to expand...
Click to collapse
Alright, I tossed the adb stuff on my flash drive, and I'm going to see if I can try this at work. I'll report back. You are going above and beyond to help me out, and it's just amazing. After my last community being the League of Legends community, I'm not used to this! :highfive:
dray_jr said:
no no do them one by one
adb shell
enter
cp /sdcard/install.sh /data/local/tmp/install.sh
enter
chmod 755 /data/local/tmp/install.sh
enter
echo "/data/local/tmp/install.sh" > /sys/kernel/uevent_helper
enter
and the device should restart
im running a nandroid backup as we speak and im going to revert back to the 4.2.2 camera update and run threw it again see if i can't figure out what is hanging u up.
Click to expand...
Click to collapse
Running each of the commands works, until the last one. I get "can't create /sys/kernel/uevent_helper: Permission denied" error message
EDIT: I got it! Yeah!! :highfive: I found someone suggesting to take the phone back to 4.2.2 with this error message and redo SMM, and it stuck! Downloaded root checker, and I got a congrats result! Thanks so much, mate! You've been such a huge help; I was going to give up the first night before I even decided to post here!
I'm glad to hear you got it rooted finally if you have any other questions or need any ideas on what to do please feel free to pm me anytime
Sent from my XT1056 using xda app-developers app
i've got one for you... running windows 7, 32 bit. Eset AV-disabled.. have 4.2.2 rooted, but can't get moto-wp-nomo to successfully run...any ideas?

Softbricked after 5.1.1 sideload - HELP!

Last night I sideloaded the 5.1.1 update to my Droid Turbo. While playing around with it this morning, I accidentally clicked the 'Force RTL' option under accessories. Immediately after, my phone crashed, and on boot would display 'system ui has stopped working' indefinitely. The wallpaper would load, and the alert modal would appear, but clearing it just kicked up another 'system ui has stopped working' modal a few seconds later.
I cleared the cache, and now when I reboot the device, it comes up with the Recovery Andy image with 'no command' below. I don't mind doing a factory reset, but I have a LOT of data I'd lose in the process. All of my pictures are backed up to Dropbox/G+, but I have a lot of other files and backups that I neglected to save externally prior to the update ... because I'm a genius.
When I try to reapply the update, I get a message indicating "/system/app/3c_main.apk" has unexpected contents. I've tried to push from SD and from ADB, both with no luck. At this point I'm happy to just reset the device, but I want my data off first. All ADB commands with the exception of SIDELOAD return 'error: closed', so I can't even backup my files.
Ideas? Help?! ANYTHING?!
spikejnz said:
Last night I sideloaded the 5.1.1 update to my Droid Turbo. While playing around with it this morning, I accidentally clicked the 'Force RTL' option under accessories. Immediately after, my phone crashed, and on boot would display 'system ui has stopped working' indefinitely. The wallpaper would load, and the alert modal would appear, but clearing it just kicked up another 'system ui has stopped working' modal a few seconds later.
I cleared the cache, and now when I reboot the device, it comes up with the Recovery Andy image with 'no command' below. I don't mind doing a factory reset, but I have a LOT of data I'd lose in the process. All of my pictures are backed up to Dropbox/G+, but I have a lot of other files and backups that I neglected to save externally prior to the update ... because I'm a genius.
When I try to reapply the update, I get a message indicating "/system/app/3c_main.apk" has unexpected contents. I've tried to push from SD and from ADB, both with no luck. At this point I'm happy to just reset the device, but I want my data off first. All ADB commands with the exception of SIDELOAD return 'error: closed', so I can't even backup my files.
Ideas? Help?! ANYTHING?!
Click to expand...
Click to collapse
Did you use the zip from Rootjunky?
Sent from my Droid Turbo using Tapatalk
zefir738 said:
Did you use the zip from Rootjunky?
Sent from my Droid Turbo using Tapatalk
Click to expand...
Click to collapse
Yes
spikejnz said:
Yes
Click to expand...
Click to collapse
You might have to wait until the OTA is available for manual download and then flash it via RSD Lite. The way the zip works is it'll only install if you have version 21.44.12.en.us installed. You have 23.11.38 so it won't install now.
Sent from my Droid Turbo using Tapatalk
zefir738 said:
You might have to wait until the OTA is available for manual download and then flash it via RSD Lite. The way the zip works is it'll only install if you have version 21.44.12.en.us installed. You have 23.11.38 so it won't install now.
Sent from my Droid Turbo using Tapatalk
Click to expand...
Click to collapse
Yikes. OTA is supposed to drop today, so hopefully that becomes available soon thereafter. Not sure how long I can survive without my phone.
spikejnz said:
Last night I sideloaded the 5.1.1 update to my Droid Turbo. !
Click to expand...
Click to collapse
I assume you mean the 5.1 update? or did you try to use a 5.1.1 update for some other phone by mistake? if so there may be no easy solution.
I don't accept defeat. Everyone said my data was a lost cause, and that Factory Reset was my only hope. Yeah, well who's copying data off his device right now?
THIS GUY.
I downloaded the firmware, removed the "erase userdata" line from the batch file, and ran it to restore the images and partitions.
I then cleared the cache (again) and rebooted my device.
Back to the 'System UI has stopped' loop
Tried unsuccessfully to send ADB commands to the device
Opened and ADB Shell in Cerberus Dashboard, but kept getting disconnected
Sent an Unlock command in Cerberus Dashboard to my device ... voilla!
UI is still crashing, but Windows is now attempting to install drivers
After trying to manually install drivers for an extended period of time, decided to attempt it on my Mac
BOOM, FS mounts and Android File Transfer is now accessing all the files, even if my display is all jacked!
Next comes the factory reset. I knew there was a reason I installed Cerberus on my non-rooted device.
Fix RTL via ADB
I had this problem on my turbo after reading about a possible fix for snapchat image problems.
After a bit of googling, I came up with this simple fix.
This will only work if ADB Debugging is enabled and your PC is already authorized.
No need for root.
Code:
adb devices
adb shell
settings put global debug.force_rtl 0
reboot
And I suppose if you do NOT already have ADB enabled et al, you're SOL?
AnoraxAudio said:
And I suppose if you do NOT already have ADB enabled et al, you're SOL?
Click to expand...
Click to collapse
If your phone has a secure lock screen, it will not recognize a usb port for file transfer or ADB mode until the password/pin/pattern/etc. has been entered. The Cerberus method described above worked because it was able to meet this requirement. With this in mind, you have the following options depending on your lock screen situation:
1. Insecure lock screen, ADB previously enabled: use the ADB method described above.
2. Insecure lock screen, ADB disabled: Plug in the USB, transfer over your important files, reboot the phone in bootloader mode, select recovery mode, perform a factory reset.
3. Secure lock screen (all cases, assuming you can't unlock it with Cerberus or something similar): Wipe cache through recovery to see if that helps anything. If it doesn't, you can try reflashing the system image via mofo or fastboot to see if that helps anything. If not, bite the bullet and perform a factory reset. You will lose your data.
Now if you have mofo, you might be able to flash a rooted rom that can perform the adb method using a su.d script, but I'm not entirely sure about that.

Reboot

Is there a way to reboot this thing without root. All the apps seen need root. Why isn't it available with the power button anyway? Am I missing something?
PolishPoet said:
Is there a way to reboot this thing without root. All the apps seen need root. Why isn't it available with the power button anyway? Am I missing something?
Click to expand...
Click to collapse
Root access is needed but the only way I know how to do it without root is with a computer via usb connection; install minimal adb and fastboot by shimp 208 and run through command prompt. Make sure you have updated motorola drivers and connect your phone, run command prompt and change directory to wherever you have adb installed; type "adb reboot" (without quotes, you may include -bootloader or -recovery to go into either of those); to install, go here.
http://forum.xda-developers.com/showthread.php?t=2317790
I've just moved to this phone from my S3, and it seems I have been spoiled by CM through the years, as the first thing I noticed about the OS was all the features I frequently used -- including a "reboot" menu item, which I wouldn't have considered a "feature" until now. The best part: when I first turned the thing on, it tried over and over to activate itself but failed, with the error message telling me it would try again the next time I reboot the phone. And how would you suggest I perform that reboot? This one I'm sure is trivial to most by now who have been using this phone for a while, but it just blows my mind.
Is shrimp's adb fastboot accepted as a recommended and reasonable workaround for this?
BTW, what other "features" am I going to notice are missing soon (and any recommended apps/methods to replace them)?
Thanks.
Doesn't just holding the power button a few seconds "reboot" the phone...or is that not really a reboot?
wjdunn3 said:
Doesn't just holding the power button a few seconds "reboot" the phone...or is that not really a reboot?
Click to expand...
Click to collapse
More of a hard power-off and back on than a clean reboot, and you would lose state and cached data, which to me isn't worth the risk.

Categories

Resources