[Q] USB OTG problem- disconnecting? - Galaxy Note GT-N7000 Q&A, Help & Troubleshooting

Hi guys,
I have a strange problem with the OTG adapter. Namely, when I connect my rii mini wireless keyboard with touchpad, everything works just fine, and then suddenly I can only use the touchpad and the mouse buttons but cannot type, or viceversa- the pointer just disappears (the Note still says 'mouse and keyboard connected'). It happens totally random and not long after the initial plugging in. It happens on both ICS and GB root (now using). I use this adapter: http://goo.gl/CRjN8
Any ideas/suggestions are welcome

?
Nobody? Any ideas/suggestions?
Just to add that transferring from a flash memory/usb card reader works fine

I am having same problem with mouse cursor disappearing few second after inserting the mouse. I also noticed that when first inserting my dell/asus/microsoft optical wired usb mouse using OTG connector my I9100 recognise it as usb mouse connected and for next few (say 40) seconds randomly it works like charm and than suddenly it disappears and no power to the mouse(no light at the mouse sensor) .
I also upgraded from GB to ICS via Kies but no improvement
anyone knows the solution?

Is this a wired solution, or BlueTooth?
Bluetooth is a known issue, its just got fixed.
Try latest CM9-kernel. Or 4.0.4 based kernel (SpeedMod K3-9/Notecore).
If its wired then I can't help you.
I bought a OTG dongle... which didn't work, I'm too lazy to order another one (its mostly the anxiety of waiting weeks for it)

shatroghistro said:
Hi guys,
I have a strange problem with the OTG adapter. Namely, when I connect my rii mini wireless keyboard with touchpad, everything works just fine, and then suddenly I can only use the touchpad and the mouse buttons but cannot type, or viceversa- the pointer just disappears (the Note still says 'mouse and keyboard connected'). It happens totally random and not long after the initial plugging in. It happens on both ICS and GB root (now using). I use this adapter: http://goo.gl/CRjN8
Any ideas/suggestions are welcome
Click to expand...
Click to collapse
Download "ntfs mounter" at google play. Open the app and plug in your otg cable with pendrive inserted. All the problem will gone.
Try it and report back.
Good luck mate
Sent from my GT-N7000 using xda premium

Related

Usb host Mouse

Hi, I have just got a usb host cable and I works fine for my pen drive but had a few questions to ask.
Is it possible to connect (via usb) Another android phone and access the micro sd from it to transfer files. The HD2 in question charges itself via usb host but enabling mass storage does nothing on the note.
I have tried my gigabyte wireless mouse and logitech wireless keyboard and neither worked. I have a BT keyboard so only really bothered about the mouse tbh.
I'm on the. Latest rocketrom.
Any help would be greatly appreciated.
Thanks
Sent from my GT-N7000 using XDA App
tucka20 said:
Hi, I have just got a usb host cable and I works fine for my pen drive but had a few questions to ask.
Is it possible to connect (via usb) Another android phone and access the micro sd from it to transfer files. The HD2 in question charges itself via usb host but enabling mass storage does nothing on the note.
I have tried my gigabyte wireless mouse and logitech wireless keyboard and neither worked. I have a BT keyboard so only really bothered about the mouse tbh.
I'm on the. Latest rocketrom.
Any help would be greatly appreciated.
Thanks
Sent from my GT-N7000 using XDA App
Click to expand...
Click to collapse
The Note has native support for HID's like keyboards and mice via both Bluetooth and USB. However, when it comes to USB, the more basic the device, basically, the closer to true plug-n-play a device is, the more likely it is to work. Also, with regard to wireless keyboards and mice, depending on the power requirements of the tranceiver, those may or may not work either.
An interesting thing to point out is that USB hub's work fine. So if you have a powered USB hub, you could theoretically plug in a USB keyboard and mouse, and an external HDD (as long as it's in a compatible format!).
Jade Eyed Wolf said:
The Note has native support for HID's like keyboards and mice via both Bluetooth and USB. However, when it comes to USB, the more basic the device, basically, the closer to true plug-n-play a device is, the more likely it is to work. Also, with regard to wireless keyboards and mice, depending on the power requirements of the tranceiver, those may or may not work either.
An interesting thing to point out is that USB hub's work fine. So if you have a powered USB hub, you could theoretically plug in a USB keyboard and mouse, and an external HDD (as long as it's in a compatible format!).
Click to expand...
Click to collapse
Very weird indeed,will have to get me a cheapo USB mouse from poundstretcher or something and give it a go.
Thanks for the reply
Sent from my GT-N7000 using XDA App
Hi
Have red around somewhere: On Android 2.3.5 the USB host function worked, but it was taken away on version 2.3.6. This is for the extended USB host functions. I have an OBD-adapter to connect with my cars computer and it needs this extended function. Likewise, there are Apps that can remote control digital cameras and also see "live view" from the camera.
I have 2.3.6 and USB pens are working and my compact camera work (in PC modus), I can read and copy files. When I try my external hard drive it won't work. Haven't tried with external power to it. (An alternative could be to use an USB-hub with external power to it. Haven't tried this yet.
I have understood that when you get to version 3.1/3.2 the extended USB host functions will work again, and also the ICS version 4.0. I'm excitingly waiting for an upgrade...
I have the original USB-adapter from Samsung
Not all USB pens or hard drives will be supported, as earlier mentioned...

[Q] 'USB on the Go' no keyboards or mice, wired or wireless working, any idea please?

Hello Members, i'm not a developer, but have a Note GT - N7000 uk version running Gingerbread 2.3.6. , so i would very grateful for you help.
I've bought two 'USB On The Go' adapters, one was not Samsung, one is. When i plug in any adapter the phone see's it, if i plug in a mouse or keyboard, wired or wireless the phone reads it saying...keyboard connected or Mouse connected, but no mouse pointer appears, nor does the keyboard types anything.
If i plug in any USB flash drive, it is always read and i can see all the files.
What's going on? I get the feeling ther's nothing mechanically wronge with the phone, but feel it maybe a data issue.
A bluetooth keyboard or mouse has no problems working, but using a keyboard/mouse this way seem's less responsive via bluetooth, than USB wireless.
I've included a screenshot from my 'about' screen, any help would be really helpful.
Kind regards
Livio
I tried many keyboards via OTG cable. It seems the only workable is the logitech (without integrated touchpad).
I'm now using a bluetooth keyboard (chinese manufacturing) working very well, in order to leave free the mini-usb and put it on the hdmi adapter.
I can plug a USB mouse in and the pointer shows up and it works.
I've only tried 1 USB keyboard and it didn't work.
It was an old Acer (I think) and it had a lot of lights, so I'm not sure if it required too much power for the Note...
I also read that you might need to turn the phone off, plug in the keyboard and then boot the phone up with the keyboard plugged in.
But that was after I had access to the keyboard to try.
So for me, mouse works, keyboard doesn't.
I just plugged the keyboard and mouse in out of curiosity.
I have a BT mouse and I've ordered a BT keyboard and hoping that will arrive in about a week.
Thanks for the replies, i tried a few keyboards and mouse makes, and i even tried the 'switch off /switch on' method with no luck, what's strange is that it see's the items plugged in but the mouse pointer doesn't appear even though the screen kind of does a quick refresh as if the pointer was going to show.
My conclusion is that it can only be Gingerbread, i'm guessing that when the ICS update finally gets offered for download, wireless keyboards and mice will work, i've done the same as yourselves and just bought a bluetooth keyboard and mouse, both different and reputable makes so i hope that they work ok.
Regards
richlum said:
I can plug a USB mouse in and the pointer shows up and it works.
I've only tried 1 USB keyboard and it didn't work.
It was an old Acer (I think) and it had a lot of lights, so I'm not sure if it required too much power for the Note...
I also read that you might need to turn the phone off, plug in the keyboard and then boot the phone up with the keyboard plugged in.
But that was after I had access to the keyboard to try.
So for me, mouse works, keyboard doesn't.
I just plugged the keyboard and mouse in out of curiosity.
I have a BT mouse and I've ordered a BT keyboard and hoping that will arrive in about a week.
Click to expand...
Click to collapse
I just tried another USB keyboard is found lying around the office and it works fine using the otg cable.
Photo attached of non-working Acer and working Macnus (in box for reference)
Sent from my GT-N7000 using XDA

[Q] 'USB on the Go' no keyboards or mice, wired or wireless working, any idea please?

Hello Members, i'm not a developer, but have a Note GT - N7000 uk version running Gingerbread 2.3.6. , so i would very grateful for you help.
I've bought two 'USB On The Go' adapters, one was not Samsung, one is. When i plug in any adapter the phone see's it, if i plug in a mouse or keyboard, wired or wireless the phone reads it saying...keyboard connected or Mouse connected, but no mouse pointer appears, nor does the keyboard types anything.
If i plug in any USB flash drive, it is always read and i can see all the files.
What's going on? I get the feeling ther's nothing mechanically wronge with the phone, but feel it maybe a data issue.
A bluetooth keyboard or mouse has no problems working, but using a keyboard/mouse this way seem's less responsive via bluetooth, than USB wireless.
I've included a screenshot from my 'about' screen, any help would be really helpful.
Kind regards
Livio

Help with Smart Dock

i was using the Smart Dock, for about 6 months, and it was running perfect, i saw movies, and play games (emus, and android games) using a ps3 controller wired, on the Dock´s USB, and every time work perfectly.
But suddenly, it stop working, now its dificult to connect, i connect it, and in the phone screen appears the "HDMI cable connected", but after a few seconds appears "HDMI cable disconnected", and then, the message appears one after one,
and when it work, the screen mirroring runs well, but when i connect a mouse (wired) dont work, neither the ps3 controller or a pendrive, the USB Host of the Dock is not working,
I try using a USB OTG, and connect both mouse and ps3 controller, and both work well, but not in the Dock
anny suggestions?
Sorry for the long post
You probably are, but just in case, I'll ask anyway..... Are you using a powerful enough charger (1.8-2.0 maH output) .... e.g-the one that came with the note 2? And are the cables snugly snapped into place and not loosely connected?
Sent from my SPH-L900 using xda premium
omar_alex01 said:
i was using the Smart Dock, for about 6 months, and it was running perfect, i saw movies, and play games (emus, and android games) using a ps3 controller wired, on the Dock´s USB, and every time work perfectly.
But suddenly, it stop working, now its dificult to connect, i connect it, and in the phone screen appears the "HDMI cable connected", but after a few seconds appears "HDMI cable disconnected", and then, the message appears one after one,
and when it work, the screen mirroring runs well, but when i connect a mouse (wired) dont work, neither the ps3 controller or a pendrive, the USB Host of the Dock is not working,
I try using a USB OTG, and connect both mouse and ps3 controller, and both work well, but not in the Dock
anny suggestions?
Sorry for the long post
Click to expand...
Click to collapse
I have this problem too!! none of the USB ports are functioning, however USB accessories all work with my Note 2 via OTG cable (I tried connecting the OTG cable to the Smart Dock too and this didn't work either)
djbenetti said:
I have this problem too!! none of the USB ports are functioning, however USB accessories all work with my Note 2 via OTG cable (I tried connecting the OTG cable to the Smart Dock too and this didn't work either)
Click to expand...
Click to collapse
I have exactly the same problem with all 3 USB ports. HDMI works fine. Is there any special setting or my dock is faulty?
I think they must be faulty, either the unit itself or possibly the charger, or the charger for some reason is not strong enough to power the USB ports (although that seems strange as everything is official Samsung product, and I've tried using my phone power adapter too which ostensibly is the same)
Yes the charger in the dock is 100% the same with the one in the phone packaging. I tried to power the dock through my laptop without any success. Unfortunately, there is not powered problem.

Fire7 (2017) BT keyboard disconnection while using kbd and mouse

Hello everyone,
I bought the Moko Bluetooth keyboard to use together with my Fire7 (2017).
On its own, it's working fine.
I would like to use a bt mouse too. I tested an Apple Magic Mouse with it and what I got is constant connection/disconnection from the keyboard, while the mouse is working (almost) fine.
Does anybody know if this is an Magic Mouse related issue or if Fire7 cannot handle "this much" bluetooth activity?
Also, anyone with experience connecting a USB mouse to the Fire7 through a USB to MicroUSB adapter?
Thanks in advance,
trepz said:
Hello everyone,
I bought the Moko Bluetooth keyboard to use together with my Fire7 (2017).
On its own, it's working fine.
I would like to use a bt mouse too. I tested an Apple Magic Mouse with it and what I got is constant connection/disconnection from the keyboard, while the mouse is working (almost) fine.
Does anybody know if this is an Magic Mouse related issue or if Fire7 cannot handle "this much" bluetooth activity?
Also, anyone with experience connecting a USB mouse to the Fire7 through a USB to MicroUSB adapter?
Thanks in advance,
Click to expand...
Click to collapse
I haven't. Suspect it is a defect. Otherwise try factory reset or to the extreme a whole stock image reset
Thanks, I'll try with other bt devices to see if I ccan replicate the issue.
In the meantime, my old logitech usb mouse is working like a charm through a cheap usb to microusb adapter.

Categories

Resources