Guys i was useng froyopro 2.5 on stock kernil an was workng charm. But i decided to change rom an kernal. An flashed firedroid 2.3 an i then i flash a transperent status bar file since then even after full wipe ,changen to diff rom an even after flashn the x8 rom problem stl exist. But wen used the w8 back i made it was fine untill i updated the rom with update service, can any1 help me? Some time the keys are press auto an it some time open app wich i didnt even touch. I tried the alfs v08 kernal but no luck :-(
Hmm, have you tried to flash the fix for that problem?
I cant link to it bcuz im on my phone, but you can find it in the dev section
Sent from my ST18i using xda premium
DevStaffAndroid said:
Hmm, have you tried to flash the fix for that problem?
I cant link to it bcuz im on my phone, but you can find it in the dev section
Sent from my ST18i using xda premium
Click to expand...
Click to collapse
Well i did flash the fixs .even flashd back to stock rom of x8 via flash tool had the problem still. Update the w8 rom seem same some time it works. Do u think its hadware problem? Coz iv flashd diff rom an kernal an even tryd roms wit stock kernal but no luck. The right side of the top conner doesnt respond most of the time.
Any1 can help me wit dis prob? :crying:
Currently fone is under warrnty so iv givn to them but wat if da prob stl bees ? Any1 know hw to fix it?
Related
I m on GingerDX 17 and locked bootloader..
i had flash the baseband to X8i XXX15..
and the wifi is not working on every rom..
it connected..nut din work on browser and others apps that need data..
is the baseband problem?
anyone can help me ?
thx~
My w8 flashed X8i xx 015 baseband, too. But mine worked fully.
But i dont know why sometimes it reboot automatically while surfing net with wifi....
I'm using LinuxDx004 with minicm7, so what kernel are u using?
Someone help?
i dont know about u guys..but mine are working fine with my w8..and about the kernel..w8 already have the latest kernel which is 2.6.29..so u dont need to flash the linuxDX...
I think LinuxDx is not stable enough, Ill try stock kernel and see will it reboot automatically or not.
I don't know..
I m on stock kernel..
Sent from my X10i using xda premium
Hi everyone!
I would like to know which one of the ROMS for X8 is the best in performance for dailly tasks. Because i have tested 3 ROMs and none of have good battery perfomance on a daily basis.
What ROM should I try? Thanks for all your answers. Take care!
Luescoff said:
Hi everyone!
I would like to know which one of the ROMS for X8 is the best in performance for dailly tasks. Because i have tested 3 ROMs and none of have good battery perfomance on a daily basis.
What ROM should I try? Thanks for all your answers. Take care!
Click to expand...
Click to collapse
I find gdx v20 best for day 2 day use
Sent from my MOLEY_X8 using xda premium
for me..
and hightly recomment is GingerDX v20
and when you know after reading thread by thread you can match with kernel
linuxDX, or Alfs kernel, or nAa kernel...
it can simply make your device faster and smootherst
but beware if you new on kernel
(make sure your know what are U doing when playing with kernel and unlock bootloader)
because it can brick you phone!
and then I sure after this you will screaming here and asking how to save your bricked phone!!
here the answer use SEUS
gingerdxv20 for sure
ginger x20 keeps on crashing my apps non stop why?? downloaded 10 apps and 6 of them crashed and had to install again..is this normal?
tohno said:
ginger x20 keeps on crashing my apps non stop why?? downloaded 10 apps and 6 of them crashed and had to install again..is this normal?
Click to expand...
Click to collapse
what apps that keep crash on ur droid?? i had no problem at all with gingerdxv20 rom..
tohno said:
ginger x20 keeps on crashing my apps non stop why?? downloaded 10 apps and 6 of them crashed and had to install again..is this normal?
Click to expand...
Click to collapse
U have to follow installation properly
make sure install GDX with CWM instead Xrecovery
and fullwipe..
or maybe your device 'special' same like my friend phone
(when I flashing GDX 20 and GDX v19 on his phone)
I found this problem = sdcard no show
but when in recovery = all files and folder prety there
and I have no idea why....
Gx with custom kernal no lag 8 day use
Sent from my E15a using XDA App
CWM? whats that?? i only had xrevocery no CWM ..is it like xrecovery where u click back when you see SE ?
No you need tap on the screen,also you need to have installed.
Sent from my XPERIA X8 using Tapatalk
froyopro incase of daily tasks and battery performance
for me gingerdx v20 is the best rom for x8 super fast and no lag
tohno said:
CWM? whats that?? i only had xrevocery no CWM ..is it like xrecovery where u click back when you see SE ?
Click to expand...
Click to collapse
when u reboot..
press volume down key or/and tap screen (when u see SE white logo)
u'll see CWM recovery and install GDX by this way
or if u can get into CWM th8 mean U don't have CWM
so install dual recovery.zip first (u can use search button)
or install other rom which one have dual recovery pre install
sorry long explaination
and hit thanks button twice!
thanks! (thanked already )
so in summary ...
open xrecovery and find CWM
if CWM is missing then go donwload it...
is cwm same with xrecovery?or is it and extension?
then use cwm and install the mod instead of xrecovery (do i need to system wipe?)
reboot phone then done?
hmmm just wondering will my link2sd apps will stay?
does it have anything to do with busybox? according to dotsen i must not update busybox
Okay , it's been hours , and I found nothing fruitful.
I just want a stable ROM on my X8 , and get rid of my Eclair.
I want Froyo , not gingerbread.
My device is rooted , Got backups with Xrecovery. I have Stock kernal
Firstly , Gingerdx v021 had a buggy messaging application , and I removed it.
Froyobread resulted into a boot loop on my device (Recovered now using PCC)
And , I'm not able to find a clean version of Floyo 1.0 . I downloaded from two sources , and got different errors. (once a missing file , and second time a MD5 error).
Is there any genuine file for Floyo 1.0 , which is 100%working, if you suggest that ? Or is there anything much better ? Download links for those will be appreciated.
I dont wish to change my kernal , and want a very stable/smooth ROM , and highly preferable choice is froyo , since it would be more stable.
Somebody Please Help !!
Well . I'm using Minicm6 , which is 2.2.1 froyo, and I like it very much. Very responsive touchscreen, nice performance, good battery life, and... STABILITY! I've never experienced force close with this rom.
-Sentrax.
Mayank77 said:
Okay , it's been hours , and I found nothing fruitful.
I just want a stable ROM on my X8 , and get rid of my Eclair.
I want Froyo , not gingerbread.
My device is rooted , Got backups with Xrecovery. I have Stock kernal
Firstly , Gingerdx v021 had a buggy messaging application , and I removed it.
Froyobread resulted into a boot loop on my device (Recovered now using PCC)
And , I'm not able to find a clean version of Floyo 1.0 . I downloaded from two sources , and got different errors. (once a missing file , and second time a MD5 error).
Is there any genuine file for Floyo 1.0 , which is 100%working, if you suggest that ? Or is there anything much better ? Download links for those will be appreciated.
I dont wish to change my kernal , and want a very stable/smooth ROM , and highly preferable choice is froyo , since it would be more stable.
Somebody Please Help !!
Click to expand...
Click to collapse
try froyopro v1.1 http://forum.xda-developers.com/showthread.php?t=1332836
proved stable for me
now i must test all froyo roms on stock kernel and ill tell you which is better
Sent from my E15i using xda premium
Try Froyopro 1.1 by Xda-rk its very stable and good rom for battery and performance...
but if you dont want unlock bootloader and you want gingerbread rom (stabble/smooth) try gingerxperia v21 on stock kernel
Sent from my E15i using xda premium
dsaklein said:
Try Froyopro 1.1 by Xda-rk its very stable and good rom for battery and performance...
Click to expand...
Click to collapse
+1 v1.1's better
Froyopro 1.1 using Xrecovery
kirmada said:
try froyopro v1.1 http://forum.xda-developers.com/showthread.php?t=1332836
proved stable for me
Click to expand...
Click to collapse
Can I install Froyopro 1.1 via Xrecovery ? Or do I necessarily need clockworkmmod recovery ?
Any known bugs (except auto-brightness) which you faced ?
kirmada said:
+1 v1.1's better
Click to expand...
Click to collapse
its a great rom im using it since it released and im more than satisfied with it, althought there is FroyoPro 2.2 but from different developer (he based his rom on v1.1)but i havent try it alot so ican tell you for sure about it
---------- Post added at 04:16 PM ---------- Previous post was at 04:15 PM ----------
Mayank77 said:
Can I install Froyopro 1.1 via Xrecovery ? Or do I necessarily need clockworkmmod recovery ?
Any known bugs (except auto-brightness) which you faced ?
Click to expand...
Click to collapse
Yes you can and you should, because if you install via cwm you will get some errors....brightness is not bug its just dont work..., but everithing else work great
Mayank77 said:
Can I install Froyopro 1.1 via Xrecovery ? Or do I necessarily need clockworkmmod recovery ?
Any known bugs (except auto-brightness) which you faced ?
Click to expand...
Click to collapse
yes use xrecovery,well in froyopro i didnt find any bug which wud frustrate the hell outta me
and frankly auto brightness whether works or not is not a problem to cos why set auto when i can set it manually according to my need
besides dat i find it ok for daily use
Thanks Everyone
Froyo Pro v1.1 Works Great on my device.
Thanks to everyone for their valuable views.
Mayank77 said:
Froyo Pro v1.1 Works Great on my device.
Thanks to everyone for their valuable views.
Click to expand...
Click to collapse
glad u liked it,enjoy
i rooted my xperia x8 and install link2sd after i setup x recovery and make sure it's installed i reeboted my phone but it's not responding it stops wroking after sony erricson welcome message not the white which u began to press back button but after it
It's a soft brick. Use PCC/SEUS
You should press the back button before the logo multiple time until the logo come out.
Then after you got to the recovery .
Do a full wipe or factory reset using recovery.
Pls. press thanks if I helped!
froyo 2.2
thanks i managed to use xrecovery and i have installed froyo 2.2 v1 and it works ok but when i log onto internet through wifi android market updated became oogle play store and everytime i used appear with a message force close and even any prog i update show with a message force close what is the issue or what is the best rom for my experia x8... anyone help plllllz
I think PrimeHD 6.0 With alfs 8 is the best
PrimeHD 6.0 works with stock nAa alfs and LinuxDX kernel
Sent from my E15i using xda premium
?
how i can install it on phone
Using Cwn or xrecovery
Sent from my E15i using xda premium
Minicm7
love_story99000 said:
thanks i managed to use xrecovery and i have installed froyo 2.2 v1 and it works ok but when i log onto internet through wifi android market updated became oogle play store and everytime i used appear with a message force close and even any prog i update show with a message force close what is the issue or what is the best rom for my experia x8... anyone help plllllz
Click to expand...
Click to collapse
Minicm7 With nAa-11 Kernel is the best. Before Fully Working CM9 Release From Paul-xxx. Check it out here. Minicm7-nobodyAtall.
And Here Thread For All ROMs, Kernels, Modules, Basebands, Recoveries, Tools, Mods, Thanks to Lucastan96.
miui gb is better,i think the link is in my signature.rom is stable,and everything works(only video recorder needs to be fixed)
Sent from my E15a using XDA
Hello frnds m new to xda forum...
i rooted my optimus black its on gingerbread v20E
m nt able to flash a custom rom on it...
can anyone plz help me n suggest any custom rom for my phone..
CookieRaider said:
Hello frnds m new to xda forum...
i rooted my optimus black its on gingerbread v20E
m nt able to flash a custom rom on it...
can anyone plz help me n suggest any custom rom for my phone..
Click to expand...
Click to collapse
If its rooted then it has clock work mod recovery install, so just install rom manager from market and select reboot into recovery, have the custom rom's zip copied on your memory card, then after rebooting into recovery do wipe data and reset then select install zip from memory card and select the copied .zip file and it gets install new rom. Zeus is good custom rom, marvel v7 is also good
Sent from my LG-P970 using Tapatalk 2
i tried using cyanogen mod v7 bt my phone went in bootloop at the time of rebooting then i had to install my stock rom again..
this happened twice so now i want to download a working rom
n by zeus n marvel are compatible with v20N only as they have stated...
CookieRaider said:
i tried using cyanogen mod v7 bt my phone went in bootloop at the time of rebooting then i had to install my stock rom again..
this happened twice so now i want to download a working rom
n by zeus n marvel are compatible with v20N only as they have stated...
Click to expand...
Click to collapse
did you do a full wipe before flashing cm7?wipe data/cache and dalvik cache through cwm.anyway since you are new to the forum check this thread.it will help you a lot.
http://forum.xda-developers.com/showthread.php?t=1487105
ya i wipped all dat stuff..
even i wipped battery stats too..
wic rom do you hav n wat is android version??
n thanks for the reply..:thumbup::thumbup:
CookieRaider said:
ya i wipped all dat stuff..
even i wipped battery stats too..
wic rom do you hav n wat is android version??
n thanks for the reply..:thumbup::thumbup:
Click to expand...
Click to collapse
i mostly use zeus 6.11 2.3.4 v20o version.zeus is very stable and fully working but some people experienced sods.here is the thread:http://forum.xda-developers.com/showthread.php?t=1454274
at the moment i use miui but some features are not working:http://forum.xda-developers.com/showthread.php?t=1588360
i have used them all from time to time and marvel is great too with aroma installer (gingerbread 2.3.4 v20o).very stable too:http://forum.xda-developers.com/showthread.php?t=1473592
regarding your problem now.are you able to enter cwm?if yes flash zeus or marvel at first.check the development section.it has many choises there and you can find every information in the first posts.
wic android version of gingerbread do you have on your phone..
sorry for asking again...
CookieRaider said:
wic android version of gingerbread do you have on your phone..
sorry for asking again...
Click to expand...
Click to collapse
In zeus gingerbread 2.3.4 v20o.now that i have miui it is 2.3.7.
Sent from my P-970 using Tapatalk
thnx for the reply n i can enter cwm...:thumbup:
by the way how did you get 2.3.7
CookieRaider said:
thnx for the reply n i can enter cwm...:thumbup:
by the way how did you get 2.3.7
Click to expand...
Click to collapse
The miui in the thread that i posted above is based on gingerbread 2.3.7.like cm7 which is also 2.3.7.
Sent from my P-970 using Tapatalk
to flash any rom do we need to have cyanogen mod installed or it can be flashed independently??
CookieRaider said:
to flash any rom do we need to have cyanogen mod installed or it can be flashed independently??
Click to expand...
Click to collapse
No you just need to have root access and cwm recovery.just remember to do full wipe before flashing a rom.
Sent from my P-970 using Tapatalk
n is miui compatible with any gingerbread version??
i mean to does it works with v20(B/E/N/O) ??
CookieRaider said:
n is miui compatible with any gingerbread version??
i mean to does it works with v20(B/E/N/O) ??
Click to expand...
Click to collapse
I think that you have not quite understand.whichever rom you are going to flash has a specific base.for example zeus has 2.3.4 v20o as a base.when you flash it your phone will have 2.3.4 v20o as a base.what you had before is irrelevant.since you flash a different based rom your firmware will change.take a look at the noob how to that i posted above.it refers to kernels and bases.if you flash nova rom for example then you go back to 2.2.2 froyo.if you flash miui you have 2.3.7.it foesn't matterwhat you have now.try to find some things on your own because we went way off topic and the moderator will close the thread.search is your assistant.
Sent from my P-970 using Tapatalk
ok..
caused lot of inconvenience to you...
sorry...
thnx for the help:thumbup::thumbup:
CookieRaider said:
ok..
caused lot of inconvenience to you...
sorry...
thnx for the help:thumbup::thumbup:
Click to expand...
Click to collapse
No inconvinience.if you want send me pm better for info.i told you that because the moderator will delete the thread if we are off topic.and for thanks you can just hit the thanks button.
Sent from my P-970 using Tapatalk
CookieRaider said:
n is miui compatible with any gingerbread version??
i mean to does it works with v20(B/E/N/O) ??
Click to expand...
Click to collapse
once youre rooted, it dosent matter what base youre using..... cos when you flash a rom you flash together with the base so it changes your whole phone software..... so its no problem switching between bases, you can even flash back froyo/ donut and go back to gb if you want.... but make sure you do your full wipes...
for roms,once rooted, only the type of device is specific.... type of base is not....(unless specified)
eg. you cannot flash an ics rom made for htc evo on your OB but what you can do is flash any kind of rom with any kind of base which was made specifically for OB
again, please do read...
Noobys How to Thread
Rom Installation Step By Step
--
even if i downloaded cyanogenmod 7 it didnt work for me..
i wiped all caches(dalvik, battery stats, factory reset) bt my went in bootloop during rebooting n i had to flash my firmware again..
why did dis happen??
Did you checked md5 checksum? Maybe file was corrupted.
Trolling in the deep
can you suggest any app for checking it??