[Q] Ethernet adapter for p1000 ? - Galaxy Tab Q&A, Help & Troubleshooting

Is there a way to connect my p1000 to wired ethernet ?
At the moment i dont have a laptop, so sometimes when i can't get wireless in the area (or no wifi for whatever reason), but ethernet is available i cant use it...
Been reading that there are some sort of adapters that worked on some chinese tablets...
Any of that goodness for p1000 ?
Tab is on ICS (cm9 nightlies)...

Haven't seen such things, maybe you could buy a small pocket AP.

sliex said:
Is there a way to connect my p1000 to wired ethernet ?
At the moment i dont have a laptop, so sometimes when i can't get wireless in the area (or no wifi for whatever reason), but ethernet is available i cant use it...
Been reading that there are some sort of adapters that worked on some chinese tablets...
Any of that goodness for p1000 ?
Tab is on ICS (cm9 nightlies)...
Click to expand...
Click to collapse
i don't think so, probably, you should go for the small AP because it make more sense to me
Sent from my GT-P1000 using Tapatalk 2

Related

[Q] Internet Question?

Hello All.
I am looking at getting the G Tablet and was wondering if I can hook up the internet through the USB. I do not have wifi or access point in my house. My home modem has a USB or ethernet connection for connecting to the internet.
I see that it can be tethered to a phone for internet, just wondering about a home modem.
Thanks for any help.
Depending on the carrier I think you have to purchase a teather plan. Sprint told me this today when I called and asked why I couldn't USB teather, but he told me I could wifi... but there isn't one. -_-
Sorry, I meant for this to be in the Viewsonic G Tablet section.
I do not know if I was clear, but I was wondering if the G Tablet will work off of a home internet connection (hard wire) via USB?
Thanks
milk4040 said:
Sorry, I meant for this to be in the Viewsonic G Tablet section.
I do not know if I was clear, but I was wondering if the G Tablet will work off of a home internet connection (hard wire) via USB?
Thanks
Click to expand...
Click to collapse
It might be possible, if you have an USB to Ethernet adapter and go that way. Directly via USB is more of a Windows thing.
Sent from my GT-P1000 using Tapatalk

[Q] Cat 5 connection? When no wifi

Probably a dumb question but can we connect the NC to a fixed line (Cat 5) internet connection. Sometimes no wifi but a wire connection is available.
Of course would need some type of USB to Cat 5 connector.
Does such a thing exist?
I don't know if you'll find what you're looking for, but i'm not ruling out the option.
Meantime, if you can access a cat5 line, and you're looking at buying hardware anyway, why not get a wireless access point?
(I am curious to see if you can do what you are asking, and I don't want this thread to die on the 'get an access point' cop out)
CAT5 Ethernet? Sure, wait until B&N redesign the NOOK and do expect another inch thicker, still want it?
I have a motorhome sitting beside my house and cannot get a wifi signal so I ran a cat5 cable out there to a cradelpoint wifi unit so I now have wifi through the coach.
Sent from my NexusOne using Tapatalk
Assuming a driver is available in the kernel for the Ethernet chipset in question, you *might* be able to use something like the Wii USB-to-Ethernet adapter combined with a USB type converter. I've no idea at all what it will do to the normal network stack, but it's _theoretically_ possible.
Rodney
votinh said:
CAT5 Ethernet? Sure, wait until B&N redesign the NOOK and do expect another inch thicker, still want it?
Click to expand...
Click to collapse
Actually not really, XJack.
But seriously though, ethernet on a tablet. Heh.
Defeats the purpose of a tablet. Becomes a slablet
ikingblack said:
Defeats the purpose of a tablet. Becomes a slablet
Click to expand...
Click to collapse
I just happened to see this. That is great!
FWIW, I've seen some no-name Android tablets that have a dongle which provides USB ports and an RJ45 jack for a wired ethernet connection.. Does kinda defeat the purpose of a tablet though..
scoob8000 said:
I just happened to see this. That is great!
FWIW, I've seen some no-name Android tablets that have a dongle which provides USB ports and an RJ45 jack for a wired ethernet connection.. Does kinda defeat the purpose of a tablet though..
Click to expand...
Click to collapse
Not at all, it would be great to be able to use my Nook to configure Routers and program firmware, maybe even to use the Nook for some tethering. I would be able to finally get rid of my battery sucking, heat factory of a UMPC.
If anyone finds a way to get a usb Ethernet adapter working with the Nook please so share.
joenathane said:
Not at all, it would be great to be able to use my Nook to configure Routers and program firmware, maybe even to use the Nook for some tethering. I would be able to finally get rid of my battery sucking, heat factory of a UMPC.
If anyone finds a way to get a usb Ethernet adapter working with the Nook please so share.
Click to expand...
Click to collapse
Didn't even think about it that way.
I know they got Ubuntu running on the NC (Not sure how well). Surely there is a wired usb nic that supports Ubuntu. I'm thinking that might be the best way.
I just bought my NC, should be here in a few days. I might just have to play with this..
What about Dalingrin's Nook Tweeks app? Using 'USB Settings > USB Host Mode' can we possibly attach a USB NIC?
I have not played with the USB Host Mode just yet, but I know I got excited when I saw it
Just wanted to link to [webcam support] USB Host support that YOU can try (now in nightlies)...some interesting discussion going on over there too....
Not too sure if I understood correctly your current setup, hopefully I won't recommend you something you have already done/thought about.
For the moment, a quick an easy way would be to plug a wireless router at the end of the network cable and then setup the wireless network. You could then connect to that wireless router with your nook.
Basically, it would look like this (inline text doesn't make a good illustration, but it's better than nothing)...
Router 1 ------(network cable)---------Router 2)))))))(wifi wave)))))))Nook
Sure you will need to setup the router correctly, but it's still very easy to do.

possible to enable usb tethering on HP touchpad?

hi guys,
i'm on the cm9 rom now and would like to make use of the "reverse tethering" app to leech my fast desktop connection via USB, so that i can sync files faster through dropbox.
to do that, i need to have USB tethering enabled on HP touchpad. would this be possible?
anyone?
dylansmith said:
hi guys,
i'm on the cm9 rom now and would like to make use of the "reverse tethering" app to leech my fast desktop connection via USB, so that i can sync files faster through dropbox.
to do that, i need to have USB tethering enabled on HP touchpad. would this be possible?
Click to expand...
Click to collapse
If your desktop is connected via Ethernet but has wireless capabilities there is an app for PC's called connectify that can make your PC a wireless hotspot .
sstar said:
If your desktop is connected via Ethernet but has wireless capabilities there is an app for PC's called connectify that can make your PC a wireless hotspot .
Click to expand...
Click to collapse
unfortunately, my pc does not have a wifi card
any other solution?
dylansmith said:
unfortunately, my pc does not have a wifi card
any other solution?
Click to expand...
Click to collapse
What exactly is your setup is your desktop connected by Ethernet to a wireless router, how is the tablet connected.
what is that you are trying to achieve, the more info you can give the easier it will be for me to replicate and hopefully come up with an answer.
regards
my hp touchpad can connect via wifi, but it's a lot slower than a wired connection. i want to try achieving FULL/near full speed download on my hp touchpad, by reverse tethering to the desktop's ethernet connection.
the desktop is connected to the wireless router through a powerline adapter, i.e. wired ethernet and is achieving full speed on its own.
One thing to note is that you'll not notice too big of a speed boost if you are connecting to the internet. The reason being, your ISP has a throughput speed of say 25 MBits a sec down and 5 up (In a hypothetical situation). Your wireless is usually up to 54 (on wireless G), and wired is either 10/100/1000 MBits. However, you are still throttled by your ISP, who runs at 25. So tethering via USB won't net you faster speeds to Dropbox, but it might for local network related things, like streaming from a local PC, transferring files, RDP, etc.
Just a thought to share, hopefully it helps.
Oh, and running through the power line like that is a messy way to do it. Home power is noisy and slows down your network speeds. Just sayin', I hope I don't offend.
73 de VE6AY
Sent from my HP Touchpad, running the latest CM9 nightly, from the XDA Premium App
sstar said:
If your desktop is connected via Ethernet but has wireless capabilities there is an app for PC's called connectify that can make your PC a wireless hotspot .
Click to expand...
Click to collapse
I've always wanted to do that, thanks for telling about connectify
Sent from my cm_tenderloin using xda premium
bump
This is the thread that keeps coming up in google searches, and since it was never answered, figured its time for a bump.
I´m in a similar situation atm, Ive got no access to data or wifi as Im traveling abroad.
Cyber cafes abound, and id love to use this app as well, but.. i get the same error.
Im surprised as id assumed CM would have all such features builtin. No big that it doesnt, im just not sure how to add it.
Any help?
(and yes, ive tried to get the other method working, but having trouble getting adb to detect the tablet, that method works on my phone, but id prefer a method that fakes 3g, since that other method doesnt work with many apps)
The problem is the to connect anything to the TP USB connector and get it to work needs power injected into the interface (hence the need for Y cables when using an OTG cable). This ends up as so complicated, that most give up and decide to use WiFi tethering. Also, I am not sure anyone has found a way to get the necessary drivers into the kernel.

[Q] Reverse Tethering?

Hello hello, So i just bought a SGS3 mini, and as i now can.. well watch vids on youtube, my data cap has been reached very fast.
I do not own a wireless router, but i do have a good wired connection, and have been trying to reverse tether the phone for a few days without luck, Its rooted and with maclaws latest 4.3.1 ROM.
I have been considering if i should buy a Wifi dongle, and use that to reverse tether, anyone know how that would work?, and what to look for on it, surely ad-hoc, but is there anything else, anyone tried this and had it work?
Apps ive tried with USB cable, and setting usb debugging on; Reverse Tethering, USB reverse Tethering, ReverseTethering 3.02 from thambaru(Windows only, it did not detect the phone..)
I do have the samsung drivers installed from maclaws site, so that should not be an issue
Please help :|
-.-, so no one has a clue how to get this working lol
I wonder, would a wifi dongle work?, done alot of googling but not sure if it works right with android phones -.-
Before anyone says router or Access point, too strained on cash for that.

[Q] Possible to connect AP or Router?

Hi all,
My first post after reading for a long time.
(Quick question)
Im wondering if anyone has or knows if its not possible to connect an AP or a wifi router to the Turbo through using the USB port?
(Long version)
My family has a condo at the beach and previously to owning my Turbo I used FoxFi full version to broadcast a wifi network for Netflix, my iPad, the Wife's iPad, etc. While not all at once this worked pretty well and saved the expense of purchasing access to the building wifi.
As you all know Foxfi wont work on the Turbo. But supposedly it still works via tether through the usb port. I work in IT so I was thinking, why not connect a driverless OTG so I could patch that to an AP or a older Netgear router that I have. Was thinking I would just plug the patch from the OTG to the "internet" port on the router and let everything connect to that.
While I know this is not a desireable solution, its one that would work for my one situation until someone figures out how to root the Turbo.
Thoughts?
I'm not so sure if that would work but I know PdaNet/foxfi has a feature that turns your laptop into a hotspot. I've tried using it and it's rather hit or miss but I think that's because of my laptop. It would atleast be worth a shot. It's called "wifi share" and can be found in the menu that you use to connect to your phone on your laptop.
IAreFlugruger said:
I'm not so sure if that would work but I know PdaNet/foxfi has a feature that turns your laptop into a hotspot. I've tried using it and it's rather hit or miss but I think that's because of my laptop. It would atleast be worth a shot. It's called "wifi share" and can be found in the menu that you use to connect to your phone on your laptop.
Click to expand...
Click to collapse
Interesting. My theory was more like use a USB to Micro usb adapter to plug into a driverless USB to ethernet adapter. Then plug a patch cable from that into the "internet" port of a home wifi router. After that turn on FoxFi and use it via the USB tethering option.
Again I understand this is not a portable option, nor as simple as turning your phone into an AP at the click of a button. But for my next beach trip this would be pretty handy.
Before I buy the ethernet adapter, does anyone know if the USB tether to the router idea would work?
From what I know for any kind of internet sharing apps such as foxfi, you need the app or program on both the turbo and the receiving device. Those types of apps dont actually share internet to the device directly but through the connected apps. Think of it like cable in your house. You need the modem or receiver to translate the signal to watch it in your house. I would love this to work but I don't think it will.
Sent from my XT1254 using XDA Free mobile app

Categories

Resources