Hello everyone,
I was able to successfully installed Overcome ROM using the guide on the Overcome website.
Now I want to taste the ICS ROM like CM9 or AOKP.
If I want to install those ROM's, Do i need to restock it again but don't install the Overcome ROM or I can copy the ROM to my SD and install it from Recovery?
Maybe someone can give brief step by step procedure. thanks a lot.
If you are using overcome ROM then just wipe data/factory reset and wipe dalvic cache. Then follow the instruction of flashing the ics ROM you want, you will find it in the first post.
Sent from my GT-P1000 using XDA
Thanks i will try to install ics rom later.
salahmed said:
If you are using overcome ROM then just wipe data/factory reset and wipe dalvic cache. Then follow the instruction of flashing the ics ROM you want, you will find it in the first post.
Sent from my GT-P1000 using XDA
Click to expand...
Click to collapse
cwiggler said:
Thanks i will try to install ics rom later.
Click to expand...
Click to collapse
AOKP SGT7 bro! it has best of both worlds I think.
Related
Hey,can I install CM7 nightly over darky's 2.3.5 BETA?
or should i downgrade to 2.2?
Just wipe the data and install the new nightly from recovery.
Sent from my GT-I9000 using xda premium
thanks man,+1
Is it better to do the wipe data/battery stats/hard reset/factory reset before or after flashing ROM?
dilerus said:
Is it better to do the wipe data/battery stats/hard reset/factory reset before or after flashing ROM?
Click to expand...
Click to collapse
Before flashing the new ROM, to give it a clean slate.
Sent from my GT-I9000 using xda premium
Pls teach me to install ics easy to follow...tnx
Sent from my GT-P1000 using xda premium
Are you familiar with flashing with Odin? Or specifically restocking using overcome method?
Basically
1) go to overcome site and download the gb stock safe and overcome kernel. And also download ics stuff aokp or cm9 and gapps.
2) flash the stock from
3) flash overcome kernel.
You can check my post here for more details of the 3 steps
http://forum.xda-developers.com/showthread.php?t=1626825
Or if you are on gb based rom, you can just start directly with step 3)
4) boot to the new cwm recovery that overcome kernel comes with and flash ics (may need to do twice) and then gapps.
Sent from my GT-P1000 using XDA
i use overcome kernel 7.no wipe is this ok to flash mtd cm9?
sir can u give me the latest link of cm9 plsss.
sorry for bothering you sir...I Appreciate for ur helping me..tnx
Cm9 link
marvz098 said:
sorry for bothering you sir...I Appreciate for ur helping me..tnx
Click to expand...
Click to collapse
PM'd you the link to the cyanogenmod download page, hope that helps yah out
sir i use overcome no wipe in my p1 now i have a CWM recovery..can i update my tab to cm9 ics 4.0.4?
help me plz i was trying to install dark theme , the instruction said : clear cash , dalvik , flash the theme
i did that now i'm stuck at the boot animation tried to full wipe the phone and nothing help me plzz
i have paranoidandroid v0.5
Warnahly said:
help me plz i was trying to install dark theme , the instruction said : clear cash , dalvik , flash the theme
i did that now i'm stuck at the boot animation tried to full wipe the phone and nothing help me plzz
i have paranoidandroid v0.5
Click to expand...
Click to collapse
Have performed a full wipe in ICS? Try flashing a stock gb Firmware with odin and do a full wipe, then re root and flash the ROM.
Or if You still have CWM You can flash abyss kernel, reboot recovery and then re flash the ROM.
glevitan said:
Have performed a full wipe in ICS? Try flashing a <a class="inlineAdmedialink" href="#">stock</a> gb Firmware with odin and do a full wipe, then re root and flash the ROM.
Or if You still have CWM You can flash abyss kernel, reboot recovery and then re flash the ROM.
Click to expand...
Click to collapse
+1
Thanks
and btw another thing my note gets really hot
what should i do ??
Warnahly said:
+1
Thanks
and btw another thing my note gets really hot
what should i do ??
Click to expand...
Click to collapse
Undervolt it using Tegra Overclock or any other utility...
I strongly recommend to check the instructions before u do the same as it can have bad impact on your device as well..
From where i can get download abyss kernel for gnote ics rom.... Can i use it with cm9
Sent from my GT-N7000 using xda app-developers app
parryjassal said:
From where i can get download abyss kernel for gnote ics rom.... Can i use it with cm9
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1362424
Sent from my GT-N7000 using XDA Premium App
I am not finding suitable answer in this link... Plz help
Sent from my GT-N7000 using xda app-developers app
parryjassal said:
I am not finding suitable answer in this link... Plz help
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
abyss kernel is GB, for u to stay safe during the wipe. The usual procedure is to flash abyss from CWM, reboot recovery (not the device), do a full wipe and then immdiately flash a custom rom.
CM9 has a safe kernel as is compiled from source and not from Samsung kernel release as some other custom roms do....just read the dev's threads. Take into consideration that not all custom kernel works with custom roms. Make sure that u choose matching pairs!...:good:
You can safely format data in cwm on cm9 kernel. However I suggest that you should reflash PA 0.5
parryjassal said:
I am not finding suitable answer in this link... Plz help
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
Suitable answer? Lol i think u dunn knw exactly wht u r searching for....
Sent from my GT-N7000 using XDA Premium App
I flashed a custom rom for the first time ever using a tutorial from roottgalaxynote.com. Everything went fine and I'm using a custom rom now. I was just wondering what the wiping is everybody is talking about. I didn't do any kind of wipe, I just installed the rom on top of the rooted stock rom. It seems to be running fine but II still don't know what a wipe does. Any help for a noob? I thnx
Look if u r on ics then there are risks gb is completely safe from this emmc brickbug
Use abyss kerenl it is known to be a safe kernel if you want to wipe
And if everything is working fine than dont wipe
Sent from my GT-N7000 using xda premium
danteoo7 said:
Look if u r on ics then there are risks gb is completely safe from this emmc brickbug
Use abyss kerenl it is known to be a safe kernel if you want to wipe
And if everything is working fine than dont wipe
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
What do you mean by look if you're on ics. I was on standard ics now on. Criskelorom. I did use the abyss kernel. I'm save from bricking using this kernel right?
There are three separate wipes:
1. Dalvik cache, and cache, clears any settings, usually first port of call if experiencing and boot loops or fc's after flashing (Dalvik wipe only available in advanced recovery, not on stock Samsung e3)
2. Full data wipe, aka factory reset, clears all data and settings off device, returns to stock.
Usually when changing from stock rom to custom or different rom types like aokp to cm9, you can get residue which means you'll often get lots of fc's when you boot up. Most people panic when they experience this and do something stupid and end up bricking. Performing a wipe just clears out any debris that may have been left. If you're running smoothly, there's no need to wipe. And yes, you're safe from emmc brickbug, above poster obviously didn't read the CUSTOM portion of your rom description.
Sent from my GT-N7000 using xda premium
Kvdvelde said:
I flashed a custom rom for the first time ever using a tutorial from roottgalaxynote.com. Everything went fine and I'm using a custom rom now. I was just wondering what the wiping is everybody is talking about. I didn't do any kind of wipe, I just installed the rom on top of the rooted stock rom. It seems to be running fine but II still don't know what a wipe does. Any help for a noob? I thnx
Click to expand...
Click to collapse
I understand that you installed Criskelo ROM. The OP of the developer clearly mentions that do a full wipe, after you have flashed Abyss 4.2 (RedPill). I think you need to read the sticky thread in the Gnote forum first as well as the Public Service Announcement regarding the brickbug, before you do any kind of flashing in ICS.
For the safety of your Gnote pls. pls. follow the installation instructions to the point otherwise you may just brick your device. Yeah your device may be working correctly right now, but it is highly recommeded to follow the installation instructions keeping in mind the brickbug issue.
thnx for your reply. I did read a lot of information on this forum, but to be honest I don't understand it all. As a former iPhone user I'm really new to this stuff. I've been waiting for months to flash the kernel because I was afraid to brick my precious phone.
Is it correct that I'm safe from brick as long as I flash abyss kernel first? So after flashing kernel I should be safe to do a wipe before installing a new rom?
You are on ics, you cannot use abyss. The abyss42 kernel is used specifically for flashing purposes.
Safe kernels for ICS are speedmod and notecore. But even then, i do all my wipes from within abyss, install my ics rom then reinstall a safe kernel.
Sent from my GT-N7000 using xda app-developers app
praetorius said:
You are on ics, you cannot use abyss. The abyss42 kernel is used specifically for flashing purposes.
Safe kernels for ICS are speedmod and notecore. But even then, i do all my wipes from within abyss, install my ics rom then reinstall a safe kernel.
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
So the abyss kernel is a safe gb kernel for wipe and installing new rom. Since the kernel is part of the rom another kernel will be installed with the custom rom. Am I right here? So every time I want to use another rom I have to flash with abyss first. But is there still a risk of bricking using using this method? I will never just install a leaked rom or anything.
thats what i do, use abyss to flash any rom even if my current rom is already on a safe kernel like speedmod, notecore or goku.
Sent from my GT-P1010 using xda app-developers app
praetorius said:
thats what i do, use abyss to flash any rom even if my current rom is already on a safe kernel like speedmod, notecore or goku.
Sent from my GT-P1010 using xda app-developers app
Click to expand...
Click to collapse
Ok thnx. Should I only flash roms that use speedmod, notecore or goku? Or do most of the roms use them? Roms like cikrelo, kingdroid etc.
I already rooted my gnote by using method stated by dr ketan and thanks for the tutorial so what should I do next?
I installed mobile odin so i just flash the HydraCore then flash rom?
Anythings I need backup before flashing?
Which rom is good for speed and battery life?
You have flashed hydracore?
If yes then make a nandroid backup via cwm and then flash any custom ROM with their respective flashing instructions.
Sent from my GT-N7000 using xda premium
ral7 said:
You have flashed hydracore?
If yes then make a nandroid backup via cwm and then flash any custom ROM with their respective flashing instructions.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
We no need backup the system files right? What we need to backup just apps we installed and some personal settings right?
You need to do backup of your boot and system and all as they are important and if anythg will go wrong then they will help you in regaining your phone at a old condition.
Sent from my GT-N7000 using xda app-developers app
If i done backup my files, what rom i can use for hydracore kernel?
How to flash rom? Any tutorial link for that?
Hit thanks button please.....
And any rom you want..depends on you...you may follow dr ketan for stock and jeetu1981 for any custom rom....and you may check android developement section please.
Sent from my GT-N7000 using xda app-developers app
shivg86 said:
Hit thanks button please.....
And any rom you want..depends on you...you may follow dr ketan for stock and jeetu1981 for any custom rom....and you may check android developement section please.
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
Can have more details on it because i still very confusing, i read the post on this link http://forum.xda-developers.com/showthread.php?t=1749863 it say Supports Touchwiz ICS, AOKP, AOSP, CM9 , CM10, JellyBean, ParanoidAndroid, MIUI roms. So mean CyanogenMod 10, paranoidandroid, AllianceROM and other roms all can use without take note on this caution - Make sure to run CM9 or an AOSP-based ROM : FLASHING FROM STOCK ICS OR ROMS BASED ON STOCK ICS WILL RESULT IN A BRICK!? Can you suggest one rom that you feel most stable and best to use at this moment?
Please flash hydracore kernel. Its a safe kernel and maybe then flash "cleaNote" ROM or any other ROM. Whatever you do just flash hyrdacore kernel and be safe.
Sent from my GT-N7000 using xda premium
happy43ver said:
Can you suggest one rom that you feel most stable and best to use at this moment?
Click to expand...
Click to collapse
latest stock ICS Rom