Related
My GSM provider happened to give me a contract in which i can dial every national mobile network for free as i am paying a fixed amount for that. But i have to pay extra for international networks and national fixed network. This is where my VoIP account should kick in, because it has much lower calling rates when trying to reach somebody out of these networks.
So as i mentioned in the Title, i would need to do some tuning with my VoIP and GSM accounts. I finally got VoIP and GPS working, now what i need is the dialer to determine which account to use when dialing different numbers, eg. i need my Diamond to dial via VoIP when i am calling international numbers or a number within the national fixed network. At the same time i want it to use my GSM Account for dialing to mobile networks. eg. it has to use the SIM card in case the dial format is +49 (1Yx) xxxxxxx, while Y is either 5,6 or 7. It should use the sip account in every other case.
So i assume that this problem might be solved with tuning the dialplan.xml, but since i have no experience in altering this file i am asking how to do it.
I also guess that editing entries within this file might give me the chance to use VoIP when dialing in international format, e.g. +1 555 727... instead of 001 555 727, as the dialer tells me that it isn't able to dial because it the phone number is not valid. As soon as i am entering the number without international country code it works fine.
Also there is the issue that the Diamond keeps turning off while talking on the phone, whether i am making a call through GSM or VoIP. In case of VoIP, my current calling connection drops because WLAN gets turned off as soon the Diamond goes into Standby mode.
Next problem is the Standby mode in general: As WLAN turns off when the Diamond goes to sleep, i am no longer logged in to my sip account. The result is that no one can call me when dialing my sip phone number.
So i would be grateful if somebody could at least help me with one of these problems. Thanks in advance!
1) about having the phone to decide automatically, according to your IP dialplan settings to use GSM or VoIP, I don't know much.
But you can always use the VoIP Today plugin to manually decide which one you'd like to use.
2)
regarding the phone switching to sleeping mode and by doing so dropping your wifi connexion, you can use DiamondTweak to modify your settings and avoiding this.
Whenever your phone will go to sleeping mode, the wifi connexion will remain active.
3)
No worry about third point, since your wifi connexion will not drop anymore.
How gps work with VOIP ?
"I finally got VoIP and GPS working..."
Can you tell me please how? i´ve tried lots of things and when i instal voipcab the gps stops working.. and after hard-reset. Do you have a special cab? Thanks
gazela00 said:
Do you have a special cab?
Click to expand...
Click to collapse
Try this thread: http://forum.xda-developers.com/showthread.php?t=415262
Ho do you manually decide which one to use? I have installed VOIP today. I can select never to use VOIP. But I cannot force to use VOIP only. That is, my HTC Touch Diamond is deciding whether to use GSM or VOIP.
riri22 said:
1) about having the phone to decide automatically, according to your IP dialplan settings to use GSM or VoIP, I don't know much.
But you can always use the VoIP Today plugin to manually decide which one you'd like to use.
2)
regarding the phone switching to sleeping mode and by doing so dropping your wifi connexion, you can use DiamondTweak to modify your settings and avoiding this.
Whenever your phone will go to sleeping mode, the wifi connexion will remain active.
3)
No worry about third point, since your wifi connexion will not drop anymore.
Click to expand...
Click to collapse
I have enabled simultaneous connections for Voice & Data in my ROM by editing the 'ContextNumber' values in the registry.
Code:
[HKEY_LOCAL_MACHINE\Software\OEM\\RIL\OperatorContexts\23415] ;Vodafone UK
"GPRSContextNumber"=dword:3
"UMTSContextNumber"=dword:3
This seems to work, to a degree but I am not sure about some of the behaviour. I have my data connection set to permanent as I use Exchange ActiveSync for work as well as MS Office Communicator Mobile 2007 R2. I have a 2nd data connection for MMS but this is hardly ever used and only for MMS anyway.
If I am on a call and an email arrives I hear a notification and if I quickly look I can see an email has been received whilst the call is still in place. If the call is short then everything seems fine, however if the call is for a few minutes or more then typically my OCS presence status gets messed up and the connection to the OCS server gets broken. The data connection is still in place but there seems to be some breakdown of sending/receiving data whilst the voice call is connected for more than a few minutes.
I am struggling to troubleshoot this and was wondering if anyone else has issues with simultaneous voice & data calls?
Andy
generally it's not a phone thing class A gsm phones all support it
but if your phone operator don't have full support in their end
there is not much you can do
read about it here
http://en.wikipedia.org/wiki/General_Packet_Radio_Service#Hardware
every htc phone I had supported it fine without any reg changes
Rudegar said:
generally it's not a phone thing class A gsm phones all support it
but if your phone operator don't have full support in their end
there is not much you can do
read about it here
http://en.wikipedia.org/wiki/General_Packet_Radio_Service#Hardware
every htc phone I had supported it fine without any reg changes
Click to expand...
Click to collapse
No, that's the thing it does work and I can receive emails via the data connection when I am on a voice call. It just seems after the voice call is active for more than a few minutes then there is some communication breakdown, however the data call remains active.
Andy
Is there any way to use Tasker or some other setting/app to have my Google Voice ring a different number depending on if I'm connected to Wifi or not?
Here's why:
I have a pretty low minutes limit on my plan, but I also have an unlimited Skype account, so I can have GV forward into my Skype number if I have a wifi connection, so I don't get charged cell minutes. But if I'm not somewhere where I have a wifi connection, I want it to ring my actual cell number.
I've seen the Google Voice plugin for Locale/Tasker, but it chooses based on location, as does the Google Voice Locations app. I'd prefer to use any location, but change the number when I'm connected to Wifi.
Thanks!
Maybe I don't understand how Tasker plugins work, but if there is a Google Voice plugin for Tasker, that should be all you need. You are not forced to trigger it based on location, make a Tasker profile based on wifi connectivity instead.
Good call. I tried it, and it works when using wifi connected as the state that Tasker checks.
Unfortunately, I realized that will be kinda useless if I don't have cell data as well, because when the wifi disconnects, there's no way for the phone to connect to Google Voice settings to change the phone number.
For me the whole point is to get my phone to work in some places I frequently go that don't have cell reception... I did manage to get it to work using Tasker custom widgets, so I can set it manually, but I don't see any way to get it to work automatically unless I have 3G data, which I don't in the locations I mentioned.
So I have single touch access to changing the settings, but not automatic based on location.
Yeah, if you don't have a connection you can't really change the setting. Sounds like you need a Tasker state that can predict the future. "Will lose wifi in 5 minutes"
But seriously, I can't think of a way to get around that problem easily. If you always had a computer online at home or something, you could have Tasker send it a signal every 5 minutes. If your home computer notices the signal is late it can run a script to switch you to your cell number, because it will know you have lost your data connection and couldn't send the regular notice.
When you get connection again, either your computer can switch it back (when it receives the 5 minute signal again), or have Tasker do it because it can talk to Voice again.
Yeah, that might be an option, actually... Hmm.
Time to brush up on some scripting skills. Any recommendations?
Thanks for the input, in any case!
Well, personally, I would set up a web server and script it with PHP, because I know that well.
No clue how to go about hooking it into Google Voice to change the settings, you'd have to look it up, but I do know Tasker can send a call to a web page.
I would make it in two parts, or two scripts.
So set up a PHP page where you would send a signal to and it would then set a 'latest signal' variable, possible in a DB but you would probably want something simpler. You would want to pass in some POST or GET variable unique to your phone, so other people don't access the page and pretend to be the phone, unlikely, but possible if you tell your friends about it
Then I'd have a separate CRON task that runs every 5 minutes, checks the DB or file to see if the phone has sent in a new update, if it doesn't see a new update it then does whatever it needs to do to change your Voice setting.
Then to switch back to Skype, you can have Tasker do it when it detects a data connection again, or just depend on your home script to switch you back when the next signal goes out.
Doesn't gv forward calls to your numbers in the order you want them to ring? If everyone called gv you can make gv forward to skype first and if you don't pick up there it rings your cell right?
I'm not home in the states so I can't test it :/
Actually they all ring at once. So you can switch to skype and pick up there.
If it does, I haven't figured it out yet.
I'm new to GV, but so far I've found that I can set which numbers ring simultaneously, or set them based on either time of day, or contact groups.
If I could have it ring Skype for 2 rings first, then my cell, that would be perfect, but I haven't found that setting yet.
Bringing this thread back to life for a followup question. Before I shell out the money for Tasker, will it enable me to alter GV settings based on WHICH wifi network I am connected to? I.E. set GV to ring home and cell when connected to my home network, office and cell when connected to my office network, and cell only for all other times?
Given it's been a couple of years since this post, is there a better way/software to do this without the expense of Tasker?
Thanks!
Ben
Would like to know if there was an app for Nexus S which would allow me to receive calls for my own number over wifi connection. I work in 2nd level basement and no way of getting signal in here. Thanks
hmm... how about SKYPE?! (everyone knows about it, it's the standard)
then people can call your skype number and you can answer via WiFi
or also Google VOICE installed by default
just need to setup your Google Voice account
Thank you for your reply Allgamer. I tried Google Voice but they do not give any accounts anymore + I am in canada and don't think Google Voice works in canada.
For Sykpe I want to use my own phone number which came with the cell phone instead of a skype or other number.!
Updated! Now works on 4.2! Updated!
Hi All-- I really miss Tmobile wifi calling, and I have finally put together a system which works for me...so I thought I would share it if anyone is interested.
It works about as well as Wifi Calling did on my Tmobile Gs2.
I have found this to have two main benefits over the Groove IP method put together by codesplice here: (note: all credit goes to codesplice--he did the heavy lifting on this..I just modified his approach)
1) the call quality is a LOT better. a LOT LOT LOT better. Groove IP sucks.
2) with this method, calls will still ring through to your gmail (assuming you have it set up that way in google voice)
Download these apps to your phone:
CSIPSimple
Google Voice
Google Voice Callback (donate) (you can get it from the amazon appstore...not on the play store anymore for some reason)
Tasker (you need the newest beta, available here http://tasker.dinglisch.net/beta.html )
Secure settings
Download this file, unzip it, and put the files on your phone's SD card (tasker profiles):
https://docs.google.com/file/d/0B4nxPgKYHIDjbVN1b3IzNC0wd1E/edit?usp=sharing
Instructions:
1) Go to Callcentric.com and sign up for a free account. Write down your SIP number that it gives you (it will start with 1777)
2) also in callcentric, sign up for a free phone number. If you say that you live in the us, you have to pay for 911 access....
3) Open CSIPSimple on your phone. It will pop up with some questions about when you want it to work. I have mine set to ONLY be in use when I am connected to a wifi network. Then add an account. It will have an option for callcentric. Do that and sign in with your callcentric account (username is the 1777 number again).
4) Go to voice.google.com on your computer, go to the settings page, and add the new phone number that you got from callcentric (the phone number, not the 1777 number). It will call you to confirm the number...it should ring through to your phone! (note: under your regular cell number, choose 'edit>advanced>make sure that "Ring my other phones before going to voicemail " is checked)
--You have now set it up for incoming calls. If that's all you care about, you are done! Any call made to your google voice number will ring through to your phone via wifi calling.--
Now we're going to set it up to make outgoing calls
5) Open Google Voice Callback. Sign in with your account. In the settings, choose your new callcentric phone number as the callback number. That's it! you're set! now when you initiate an outgoing call, it will ring back to you, and you are good to go for free wifi calling!
--If you don't care about automating it, you can stop now.--
We're now going to set it up so that it works like WIFI calling, meaning that it a) turns on when connected to a good wifi network, b) turns off your cell radio when connected so you're not wasting battery, and c) it turns off automatically when you are not connected to wifi. We will do this with the miracle of tasker.
6) Make SURE you are on the latest beta of tasker. It is required for this to work!
You can find the newest beta here: http://tasker.dinglisch.net/beta.html
DL this zip file that I put together with my tasker profiles, unzip the files and put them on your SD card. Open up tasker and long-press on the 'profiles' tab. Choose import, and then import them.
Ze hu! You're done! Please let me know if it works--and I'm happy to try to help if it doesn't.
If it works for you, please click 'thanks'!
----
Note--the tasker profiles were put together originally by codesplice, and all credit for them goes to him, not me. You can find his thread here: http://forum.xda-developers.com/showthread.php?t=1646755
----
The advantage of CSIPSimple over the native SIP client in JB is that CSIPSimple can be set to only operate when connected to wifi.
I hope this is useful for everyone--works great for me!
Sent from my Nexus 4 using Tapatalk 2
Just to clarify your method works only if someone dials the google voice number?
I mean that's fine, but I think a majority of folks are looking for T-mobile Wifi calling that ties in with their regular phone number and plan feature.
Re: [Guide] Wi-Fi Calling!
Your thread title is very misleading. Change it.
Sent from my Nexus 4 using xda premium
edit.. nevermind
I agree, the title should be called Voice Over IP. T-Mobile WiFi Calling is actually their product name.
But the guide is great! I use Google Voice too, but for my Sprint number because it is free full integration. But that's not really possible with T-Mobile, and its not free either. I just need a fix for my T-Mobile Nexus 4 so I can get service everywhere lol.
Re: [Guide] Wi-Fi Calling!
Op,
Welcome to n4 world. I saw your same post in nexus7 forum.
Your method may work well for n7 but not for n4 because of battery drain issue. Using this method over 3g, n4 will not last 12 hours. Its because callcentric doesn't support TCP.
IMO, this is only good for WiFi as the title suggests. But I agree that the title is misleading. When i first saw it, i thought you cracked tmo WiFi calling. OTOH, there are tons of threads on free WiFi calls.
There is another side effect for your outgoing calls. The callback method is equivalent to initiating a call from gv web app. Gv calls both parties. I have found that this adds close to .4 sec lag one way. Do an echo test at 909-390-0003. You will hear your voice after 1 second.
Sent from my Nexus 7 using Tapatalk 2
Issue with WiFi Calling Method
Please correct me if I'm wrong, but the major issue I see with this method is that it requires an active cellular connection for an outgoing call. For me (and I'm sure may others) the need is to be able to send and receive calls with no cellular coverage. Personally, with a lab/office in the basement of a building, having any coverage is not feasible, regardless of carrier.
Is there any workaround/alternate plan that would solve this issue?
Edit: At first, it was saying I needed to disable airplane mode, but once I reconfigured the CSIP and the callback app, it worked even on airplane mode. I guess the GV Callback (now called Voice+ in the Play Store) intercepts the call and initiates the callback via WiFi.
Thanks for the guide. This will work as a workaround until TMO Wifi Calling gets ported to the N4.
I use talkatone, really good sound quality
Sent from my Nexus 10 using XDA Premium HD app
I use Skype, $3 per month for unlimited US and Canada calls. For outbound calls and text you can use your own phone number. For inbound you can not, but you can probably set up some kind of redirection. I never gave it a thought, because I never needed it
So no one has an alternative to WIFI calling?
By this I mean, being able to recieve calls from anyone with my phone number just like TMo Wifi calling when I don't have any mobile signals?
edo101 said:
So no one has an alternative to WIFI calling?
By this I mean, being able to recieve calls from anyone with my phone number just like TMo Wifi calling when I don't have any mobile signals?
Click to expand...
Click to collapse
I setup call forwarding when not reachable (**62*PhoneNumber#) to my google voice/hangouts number. I don't have too many opportunities to test this, but it seems to work.
voland66 said:
I setup call forwarding when not reachable (**62*PhoneNumber#) to my google voice/hangouts number. I don't have too many opportunities to test this, but it seems to work.
Click to expand...
Click to collapse
So how does that work? It calls your phone number and when it seems you have no signla and therefore cannot be reached, it dials your google voice number when then dials your phone? Have you checked to see if it works when you have no tmobile signal?
I tested this in a couple of ways. First, I switched to airplane mode and turned wifi back on. I had someone make a phone call to my t-mobile number. It came through on hangouts, the quality was great etc. I think the calling party did not see a delay in the call being answered. Of course, I knew that the call was coming so I answered quickly; but I think t-mobile system saw that the phone is not registed with any tower and forwarded the call to google voice right away. I repeated this test at least a couple of times.
The second test was a "real" one, in a building which does not have t-mobile signal. This test was only a partial one because I was in a meeting, so I could not answer. But the phone rang (vibrated actually) and the calling party got a google voice answering machine.
I also had a couple more accidental, partial tests. There is a stretch of the road near my house where the phone switches between two towers, neither tower has a good signal and calls are dropped when I drive/walk through there. So I recently received two calls in that area. The calls came on hangouts; there was no sound when I answered but at least I got the call and caller's name. I think the following happened: when the initial call came the phone was in the dead zone and the call was forwarded to google voice. By the time it came through on hangouts, the connection was restored but was not fast enough for voip call. Now that I think about it, I got another accidental test at home -- while I have a good signal at home, on some rare occasions my phone does not ring; so recently a call came through hangouts while I was at home and everything worked fine.
I should mention that when I started doing this, I was under impression that the forwarding setting occasionally resets to default (no-forwarding) on its own. But now it looks like the setting stuck permanently and I don't need to check/reset it anymore.
Yes, use Google voice/google hangouts dialer.
Make and receive calls from google hangouts.
You can setup a google voice number for free as well. you can use it to receive calla directly and/or to call from.
https://support.google.com/hangouts/answer/6079055?hl=en
Sent from my Nexus 4 using XDA Free mobile app