do you know why my mobile phone lcd screen are flashing by itself?
I had flashed the kernel and full wipe...
is it showing the frames updates, perharps? Cause the ROM I am using right now has that option and you can see every time a frame is updated. Try looking in the developer settings.
Simply go back to the stock kernel and ROM, if the screen is still flashing, it's a hardware issue.
Agreed with IHawkeyI
Sent from my XPERIA using XDA Premium.
what hardware issue man??
BlackRabbit1703 said:
what hardware issue man??
Click to expand...
Click to collapse
The thing inside your phone may be damaged
Sent from my E15i using XDA
no...
so in 1 minute, my phone turn on by it self 2- 5 times..like flash
did I flash wrong kernel,,,cz I using minicm7 2.2.1 and nAn kernel -11 :cyclops:
I had that problem with MiniCM7 2.2.1 and Alfs-CM7 v08a kernel.. Flashed nAa-11 kernel and no problems 4 me no more...
pipi14 said:
I had that problem with MiniCM7 2.2.1 and Alfs-CM7 v08a kernel.. Flashed nAa-11 kernel and no problems 4 me no more...
Click to expand...
Click to collapse
I had also been like that...but any person said that I must flash the alfs
Didn't you say that you install GZR? Are you laying to me?
2010matej said:
Didn't you say that you install GZR? Are you laying to me?
Click to expand...
Click to collapse
now I already installed it matej ,,,but my wifi and dual touch didn't work
BlackRabbit1703 said:
now I already installed it matej ,,,but my wifi and dual touch didn't work
Click to expand...
Click to collapse
Flash Alfs kernel for CM7 not for gdx!
And don't lie! Because yesterday you say that you install gzr!
Related
I have X-recovery with froyobread ROM on my xperia x8 currently. Can gingerdx be flashed through same recovery because in Gingerdx requirements doxianh wrote clockwork mod !!
If not. Please tell me how to remove/replace x-recovery with clockwork mod !!
install this as custom zip in xrec. then u'll get CWM
credit: ponanovn
to enter cwm, u must tap ur screen repeatedly when it show the sony ericsson
maliceomalice said:
install this as custom zip in xrec. then u'll get CWM
credit: ponanovn
to enter cwm, u must tap ur screen repeatedly when it show the sony ericsson
Click to expand...
Click to collapse
Thanku so much 4 replying ! I am new to the xperia x8 community (was using optimus one) b4 & had a hard time figuring out the basics. I will be installing gingerdx next !
Unlock bootloader, flash one of kernels, boot phone, enter CWM and install GDX
you guys have gave him requirements for cwm but you never answered his question:
you can flash v013 or below with xrecovery but v014 or higher you need cwm.thats why i have gdx v013; i can flash v014 or higher since i have cwm but i like the version i got + i cant be bothered to rewrite all of my contacts
Oh damn. when I first flashed GingerDX, I used xRecovery for it to install v018, and EVERYTHING worked fine! Camera, 3G , Bluetooth, wifi. , Not a problem!
But maybe that was a once off.
I then installed v019 with CWM
Sent from my X8 using xda premium
wicked
IrishStuff09 said:
Oh damn. when I first flashed GingerDX, I used xRecovery for it to install v018, and EVERYTHING worked fine! Camera, 3G , Bluetooth, wifi. , Not a problem!
But maybe that was a once off.
I then installed v019 with CWM
Sent from my X8 using xda premium
Click to expand...
Click to collapse
you were pretty lucky for it to work via xrecovery. maybe you have theForce
lol
-wilbso
wilbso said:
you were pretty lucky for it to work via xrecovery. maybe you have theForce
lol
-wilbso
Click to expand...
Click to collapse
Yea. I only noticed what I had done about a week ago.
Sent from my X8 using xda premium
hi i'm using gingercruzt 8.4 its an awesome rom
i just wonder if any of the kernels floating around is compatible with this rom
thanks in advance
You will have to try some kernels like alfs or linuxDX, NAa kernel. The linuxDX and alfs are made for the gingerDX ROM but may work ok on gingercruzt
Hope you got some insight
Sent from my X8
Alfs v5 capped
rav3n_pl said:
Alfs v5 capped
Click to expand...
Click to collapse
do i need to delete modules and some stuff ? or should i just flash it and enjoy
i already unlocked bootloader
thanks
I just flashed it and i had dual touch module it replaces all that stuff.
Sent from my X8
UserWith-A-Cupcake said:
I just flashed it and i had dual touch module it replaces all that stuff.
Sent from my X8
Click to expand...
Click to collapse
some people say that modules like mddi and oc if they are already in the kernel and in the rom the phone becomes unstable
is it stable and smooth ?
Its really fast and stable wouldnt go back to stock ever
Sent from my X8
bxmx666 said:
do i need to delete modules and some stuff ? or should i just flash it and enjoy
i already unlocked bootloader
thanks
Click to expand...
Click to collapse
Yes. You need delete modules from rom. Or get prepared version of GCR from my skydrive
Sent from my E15i using XDA App
I plan to update soon to minicm7 2.2.0. It says that i should use naa kernel, but should i? Many say alfs is better, what do you think? Im kinda afraid alfs wont work perfectly cuz naa was made for minicm7 right?
Sent from my E15i using XDA
wakoko79 said:
I plan to update soon to minicm7 2.2.0. It says that i should use naa kernel, but should i? Many say alfs is better, what do you think? Im kinda afraid alfs wont work perfectly cuz naa was made for minicm7 right?
Sent from my E15i using XDA
Click to expand...
Click to collapse
MiniCM7 only works with nAa kernel.
Here is it's link:
http://forum.xda-developers.com/showthread.php?t=1350484
But before installing any kernel you must have you bootloader unlocked.
Hit thanks if I helped!
yap.....use nAa 11 kernel it is awesome ,...and thetwistedx is rite you have to unlock your bootloader.....search the forum for tutorial......or PM me....
binhari said:
yap.....use nAa 11 kernel it is awesome ,...and thetwistedx is rite you have to unlock your bootloader.....search the forum for tutorial......or PM me....
Click to expand...
Click to collapse
Check the date of manufacturing first, before unlocking your boothloader, otherwise your phone may get screw, and it is expensive cost!
saintckk said:
Check the date of manufacturing first, before unlocking your boothloader, otherwise your phone may get screw, and it is expensive cost!
Click to expand...
Click to collapse
I flashed my phone 2 times already. I'm pretty sure I unlocked my BL before. But the funny thing was I didn't check before if it was safe for me.
Lucky me is lucky. =) Haha..
But wait guys, look at this post, he says he has alfs V8 + minicm7 2.2.0:
http://forum.xda-developers.com/showthread.php?t=1567157
wakoko79 said:
I plan to update soon to minicm7 2.2.0. It says that i should use naa kernel, but should i? Many say alfs is better, what do you think? Im kinda afraid alfs wont work perfectly cuz naa was made for minicm7 right?
Sent from my E15i using XDA
Click to expand...
Click to collapse
i use nAn v.11
it's kernel working wery good
I use minicm7 2.2.0 and alfsv8a... Flashd new adreno libs package by dehumanised... Overclocked to 787mhz stable, and get 69-70 fps in neocore!
hey....alf kernel is good....but nAa id specifically made for MiniCm 7....so it works really well with nAa...i suggest u to use
Kernel>>>> nAa
Rom>>>> MiniCM 7
sidkota said:
I use minicm7 2.2.0 and alfsv8a... Flashd new adreno libs package by dehumanised... Overclocked to 787mhz stable, and get 69-70 fps in neocore!
Click to expand...
Click to collapse
I thought the ardeno lib update is built in minicm7 2.2.0? So you have to flash it if you are using alfs instead of nAa?
wakoko79 said:
I thought the ardeno lib update is built in minicm7 2.2.0? So you have to flash it if you are using alfs instead of nAa?
Click to expand...
Click to collapse
The new adreno libs are those which qualcomm published for ics...
http://forum.xda-developers.com/showthread.php?t=1573538
Sent from my W8 using XDA
thetwistedx said:
MiniCM7 only works with nAa kernel.
Here is it's link:
http://forum.xda-developers.com/showthread.php?t=1350484
But before installing any kernel you must have you bootloader unlocked.
Hit thanks if I helped!
Click to expand...
Click to collapse
not really bro, i use alfs 09c cm7 no fps with minicm7.2.2.1 and give awesome performance.
I've GDX v026 (2.3.7) flashed on my xperia x8 and it's awesome rom everything workin fine, but am just wondering if there's any better roms?
From my x8 by Ze_war xD
I am using MiniCm7 2.2.0 right now, cuz with GingerDX my phones WiFi dont want to work. But yeahh MiniCm7 and GingerDX r both really good roms and i dont now any better roms. Have tested many roms but those two r best for me so far.
For me better than GDX is MiniCM7 2.2.0 and alfs8av5 by djnilse&alfsamsung
Zewarxx said:
I've GDX v026 (2.3.7) flashed on my xperia x8 and it's awesome rom everything workin fine, but am just wondering if there's any better roms?
From my x8 by Ze_war xD
Click to expand...
Click to collapse
You could always try the ICS roms. Most of the kinks have been ironed out and MiniCM9 is quite smooth
Sent from my E15i using Tapatalk 2
SpyderX said:
You could always try the ICS roms. Most of the kinks have been ironed out and MiniCM9 is quite smooth
Sent from my E15i using Tapatalk 2
Click to expand...
Click to collapse
Dude everything works fine with ics roms? Like on some posts I read that camera dsnt work and other says wifi dosnt
Can u link me with workin one?
Thanks in advance
From my x8 by Ze_war xD
On minicm9 camera work,recording video is laggy,panorama is laggy for this while,but wifi works.
przemek4113 said:
For me better than GDX is MiniCM7 2.2.0 and alfs8av5 by djnilse&alfsamsung
Click to expand...
Click to collapse
May you link me please :$
Thanks in advance
From my x8 by Ze_war xD
Here http://forum.xda-developers.com/showthread.php?t=1575094
przemek4113 said:
Here http://forum.xda-developers.com/showthread.php?t=1575094
Click to expand...
Click to collapse
I don't have to do anything since I've already have custom rom? Just wipe factory n install the zip!?
From my x8 by Ze_war xD
Zewarxx said:
I don't have to do anything since I've already have custom rom? Just wipe factory n install the zip!?
From my x8 by Ze_war xD
Click to expand...
Click to collapse
You have to flash the nAa ics kernel first. Then wipe data and flash rom and gapps.
Sent from my E15i using Tapatalk 2
I tried gingerdx. Today but wifi doesn't work for me.. so back to primehd its best for me.. I've tried minicm7.2 and gingerzarakia but for me primehd is d best...
Sent from the hell..
sidhart said:
I tried gingerdx. Today but wifi doesn't work for me.. so back to primehd its best for me.. I've tried minicm7.2 and gingerzarakia but for me primehd is d best...
Sent from the hell..
Click to expand...
Click to collapse
what's ur phone mate !? the wifi works on my phone since the 22 and on gdx we are on 26 !!
i can't use "[ROM] MiniCM9-3.0.2 [26/5/12]ICS 4.0.4/CM9 port for the Χ8"
since i don't know what's written on my white stickers so i can't know if can unlock my bootloader any other rom's guys ?
How about gingerxperia v25 rom?? I think so far so good..
Sent From My E15i Using XDA Ultimated
I can't unlock my bootloader it will Brick my phone
Sent from my X8 using XDA
roniandria said:
How about gingerxpria v25 rom?? I think so far so good..
Sent From My E15i Using XDA Ultimated
Click to expand...
Click to collapse
The thing is I want something else than gingerq, but thanks
From my x8 by Ze_war xD
Best for me is PrimeHD. i find it faster than the others and today v9 is out
http://forum.xda-developers.com/showthread.php?t=1480404
Zewarxx said:
what's ur phone mate !? the wifi works on my phone since the 22 and on gdx we are on 26 !!
Click to expand...
Click to collapse
I tried v26 with alfs kernel, I even tried factroy reset but didn't worked just shows error while turning on...
Sent from the hell..
arikos said:
Best for me is PrimeHD. i find it faster than the others and today v9 is out
http://forum.xda-developers.com/showthread.php?t=1480404
Click to expand...
Click to collapse
Its here really!!!
Hows it? I'll get it soon..
Sent from the hell..
Prime HD has a stock version you should give it a try..
Sent from the hell..
Hi
At start i want to say iam from Poland and my english isnt ... perfect.
I got problem with installing roms in my X8, maybe i say how i do it and u say what iam doing wrong ok?
1. getting root right
2. flashing kernel (i tried with alfs and naa
3. getting zipped rom on sd card
4. wipe
5. after turn on iam choosing rom zip to install
6. then sceen autmatic backs to main CWM screen
7. iam reboting phone
8. phone is starting up but not starting.
Phone got breaked bootloader.
Any1 can help me ?
IAmNice
I unlocked bootloader (11W04).U think soft can be bricked ? How can i unbrick soft ?
feherneoh
Like u say i can access to CWM menu (no prob with any kernel), but then i cant install any rom, i try with other sd card maybe its rrly half-dead.
At all i can retrive phone to stock kernel and stock rom.
What's your baseband number?is it xxx015?
Also,you have to full wipe/factory reset at cwm before installing the rom(sometimes after,you can see this at the rom thread)
Sent from my X8 using xda premium
Yup i got baseband xxxxx015, i always do full wipe before, and u say to try it when rom is installed after reboot ?
matxxx said:
Yup i got baseband xxxxx015, i always do full wipe before, and u say to try it when rom is installed after reboot ?
Click to expand...
Click to collapse
this aint sd problem i think... repair with SEMC.. and try re rooting the phone and then carry on the install.. if it still gives problem that zip is to blame:good:
@CnC-ROCK the thanks was just to show that what you are doing is right. continue to do this and you'll earn yourself a million thanks, one day.
@OP do you get any status 7 or similar errors? what ROM exactly are you trying to install?
I dot get any errors.
I tried with Blur v5 (based on cm7) and CyanogenMod 7 RC4 V7
matxxx said:
I dot get any errors.
I tried with Blur v5 (based on cm7) and CyanogenMod 7 RC4 V7
Click to expand...
Click to collapse
try repair sir.
Repair with what ? Sony PC Companion ?
matxxx said:
Repair with what ? Sony PC Companion ?
Click to expand...
Click to collapse
yes repair with SEMC.. also called PC companion..
if it says that you already have latest version and does not install OS again then... wipe system and try repair again...
good luck doing it
report if it works
matxxx said:
I dot get any errors.
I tried with Blur v5 (based on cm7) and CyanogenMod 7 RC4 V7
Click to expand...
Click to collapse
Maybe this is the problem,isn't this cm rc4 v7 by xperiafan13?this is for stock kernel,I'm not sure but I think it should work with customs,maybe try to install your rom with stock kernel.
Sent from my X8 using xda premium
stamatis16 said:
Maybe this is the problem,isn't this cm rc4 v7 by xperiafan13?this is for stock kernel,I'm not sure but I think it should work with customs,maybe try to install your rom with stock kernel.
Sent from my X8 using xda premium
Click to expand...
Click to collapse
it should install even if not supported for a kernel.. it will not boot or give problems after it.. but it wont stop installation of rc4
anyway.. rc4 supports alfs v9
CnC-ROCK said:
it should install even if not supported for a kernel.. it will not boot or give problems after it.. but it wont stop installation of rc4
anyway.. rc4 supports alfs v9
Click to expand...
Click to collapse
I know, but he will not hurt himself if he try with stock too
Sent from my X8 using xda premium
stamatis16 said:
I know, but he will not hurt himself if he try with stock too
Sent from my X8 using xda premium
Click to expand...
Click to collapse
ya... the problem is either in zip (most probably) or something went wrong installing cwm..