Just download lastest stock firmware from samfirware but when uncompressed there is only one file in there "S5830XWKT7_S5830TMHKP1_S5830XWKT3_HOME.tar" how to install it through odin as there is no boot,csc,pda and modem etc, download other one but same single file,so friends plz tell me how to install them ???
Its very easy.
Just select in Odin "One Package"
and select the file .tar
lol
No need of other files.
Thanks buddy, I knew this but wanted confirmation from anyone as its better to ask then end messed up LOL.
In odein selecting one packing and and starting gives error "an unnamed file was not found." so its seems there is something missing i didn't have ops ins that package maybe this can be the reason any one have any idea how to install this ?????
vazeer said:
In odein selecting one packing and and starting gives error "an unnamed file was not found." so its seems there is something missing i didn't have ops ins that package maybe this can be the reason any one have any idea how to install this ?????
Click to expand...
Click to collapse
Oh I though you already had .ops file
You need .ops and the ROM you want to install.
It should look like this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
i have the cooper.ops file here you go, i had to archive it, it wouldnt let me upload directly
Thanks dear !
choose one package and select one package file you have downloaded i just went through this myself
Related
This is the new Provision.zip file.
Copy it to \windows folder.
Soft Reset the device.
Then you can go to
Start->Settings->Connections->connection setup.
And use the new settings.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
http://rapidshare.com/files/73999592/provision.zip
Enjoy,
Nadavi.
Will give it a try. Hopefully they changed Belgique into Belgium now
Hey it has rogers in canada now! but no fido (sorry to those that have)
Hey! Who's got Fido?
I know I haven't.. What you see on my posts is a default (ad?) icon cause in my profile it says Etisalat UAE but they don't have that icon!!!
what's the password to the file?
It doesn't let me replace the already existing provision.zip file in the \windows folder. It says "Cannot move provision. Access is denied."
The "Delete" and "Rename" menus for the existing files are also disabled.
use a program like resco explorer i think it also worked via activesync
I'm using firmware 1.81.707.0 that has a different program called Network Settings. This has no effect here :-(
It only know Asain and Australian operators, nothing in the UK
anyone know the zip password?
Hi, the zip file seems to be passworded unless you don't have to uncompress it, and just move it to the windows folder? Anyone can clarify this?
Sorry ....
don't need to even open the zip, just drop it in the windows folder overwrite the one there (or backup the original zip first)
Okay, so let's say you want your phone to seem to a Samsung rep to have never been rooted or messed with in any such fashion.
What exactly, all in all, would you say you would have to do to get it back to such a condition after having been rooted?
I assume it is something like,
Reset the counter with a usb jig
flash original firmware
But it would not surprise me if there were other loose ends that could end up messing you up as well, so I thought I'd ask.
flash a complete firmware package. custom download counts are stored in the PARAM.lfs partition.
This should do it for you. flash once to enable the "Flash Bootloaders" checkbox then check it and flash again.
This Java JAR file works on Linux, Windows and Mac. Just have java installed on your computer and follow directions (if any).
http://files.teamkomin.com/index.php?dir=i9000SGS/
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
AdamOutler said:
flash a complete firmware package. custom download counts are stored in the PARAM.lfs partition.
This should do it for you. flash once to enable the "Flash Bootloaders" checkbox then check it and flash again.
This Java JAR file works on Linux, Windows and Mac. Just have java installed on your computer and follow directions (if any).
http://files.teamkomin.com/index.php?dir=i9000SGS/
Click to expand...
Click to collapse
Thanks so much for this, but man I just realized I managed to post this in the wrong forum.
Should have posted it in the galaxy s ii forum.
I think he posted the file for SGS onli.
Sent from my GT-I9000 using xda premium
hi
download this firmware
h-o-t-file.com/dl/151160374/90618c3/S5570IJPLC2_OJPLC2_KSA_Android_2.3.6.zip.html
h-o-t-file.com/dl/150776465/f7b2db8/GT-S5570I_THR_S5570IJPLC2_S5570IOJPLC2_S5570IXXLC3.zip.html
and when extract
in this packages has two files
S5570IJPLC2_S5570iOJPLC2_S5570IXXLC3_HOME.tar.md5
Size 230 MB
and Header file is sbl.bin
SS_DL.dll
Size 270 KB
and whe run S5570_Odin Multi Downloader v4.38 and select one Package
file Odin crashed
How Update Firmware?
Afaik, odin 4.38 for the original mini does not work 5570i.. Use odin for galaxy y. Check the dev thread for discussion and development..
Odin3 v1.85 (galaxy y)Does not support one package file?
alifaghihi said:
Odin3 v1.85 (galaxy y)Does not support one package file?
Click to expand...
Click to collapse
Did you try this:
http://forum.xda-developers.com/showpost.php?p=24185211&postcount=24
Original thread here:
http://forum.xda-developers.com/showthread.php?t=1567101
mr.faridcom said:
Did you try this:
http://forum.xda-developers.com/showpost.php?p=24185211&postcount=24
Original thread here:
http://forum.xda-developers.com/showthread.php?t=1567101
Click to expand...
Click to collapse
These versions can not update single file firmware
rename S5570IJPLC2_S5570iOJPLC2_S5570IXXLC3_HOME.tar.md5
to
S5570IJPLC2_S5570iOJPLC2_S5570IXXLC3_HOME.tar
and extract with WinZip® (only WinZip® application ) and The problem was
solved
http://forum.xda-developers.com/showpost.php?p=24275232&postcount=33
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Update
What is different in this update? Will I lose my data after updating this?
bebubanche said:
What is different in this update? Will I lose my data after updating this?
Click to expand...
Click to collapse
nothing There are one integrated file in original firmware (samsung kies)
Data is stored in two locations
phone storage (Backups should be)
and SD-card is safe
you dont need extract the file, see here : http://goo.gl/o3cXv
Well, how to change or fix this in update.zip folder? I did cange error which says something about that it can not be instaled over newer rom, so i fix it in buil.prop... now, how to fix that error about signture failed in same zipped rom? Tnx all,
really
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
RamHa said:
Well, how to change or fix this in update.zip folder? I did cange error which says something about that it can not be instaled over newer rom, so i fix it in buil.prop... now, how to fix that error about signture failed in same zipped rom? Tnx all,
really
Click to expand...
Click to collapse
Somewhere in the recovery you're using (CWM, I assume) there are settings options. Find that and uncheck the ones that require md5 and zip file signatures.
Tnx, but that is from stock recovery on HP Slate 7 6100en VoiceTab... Eh, i wish to instal CWM, but i didnt find way to do that, system is corrupt, im stuck in that stock recovery...
RamHa said:
Tnx, but that is from stock recovery on HP Slate 7 6100en VoiceTab... Eh, i wish to instal CWM, but i didnt find way to do that, system is corrupt, im stuck in that stock recovery...
Click to expand...
Click to collapse
This is my last response on this issue:
http://hard-resets.com/hp-slate-7-factory-reset/
http://forum.xda-developers.com/showthread.php?t=2422353
Good luck.
Thank You very much @shumash i appreciate your help.
Cannot Start Up By Pressing Power Button
But I Do Is Format My Phone Using SPFT And Now Is Brick Please Help ME
And As In Now Im Flash My Phone But Showing Like This
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Im Stock ON RED BAR 100% Error
This SC Is Not Really I Get This on google but this is same error w/ me
BLUR1HD said:
This SC Is Not Really I Get This on google but this is same error w/ me
Click to expand...
Click to collapse
that message usually means wrong files.
You said you tried to format in flash tool. Did format finish or did that also stop on the red bar?
And if it did finish format you will need all files flashed .
More question.
Did you format "all" or "all except preloader"?
If you formated "all" you might be stuck not able to fix.
I Format All .
But The MTK Detected
The Format Is Finish Sir
After That I Tried To FLash Again But Showing 5054 error
"
BLUR1HD said:
After That I Tried To FLash Again But Showing 5054 error
Click to expand...
Click to collapse
5054 error means the files you are flashing do not match the device.
was your phone 8gb or 16 gb?
the only flashable files i know about being available for download are the ones I put up and they are for 16gb phone.
it is theorized that you can just modify the scatter file to match an 8gb phone, but to my knowledge it was not proven.
==>>prime-6.1-flashtool-flashable.zip-files
google quickly pulled this site up when asked about the error
http://www.saransaro.com/how-to-guides/brom-error/