Clockwork mod missing - TouchPad Q&A, Help & Troubleshooting

Hi everybody I had a question, I tried installing TWRP from goomanager for the touchpad the other day. When it installed I went in to moboot and tried opening it it gave me the error invalid size. Also, after installing TWRP to option for clockwork mod disappeared on my moboot. So through intrernalz pro on web os I was able to remove the uimage of twrp from the boot folder, but that left me with only the option to boot into cyanogenmod and no type of recovery option available. I tried using acmeinstaller2, to just install CWM but after restarting there was nothing added to my moboot. I am sort of at a stand still since with out a recovery i cant update, nor can i recover from a back up. Any help would be appreciated. Thanks guys.
- Zero

zeroman9121 said:
Hi everybody I had a question, I tried installing TWRP from goomanager for the touchpad the other day. When it installed I went in to moboot and tried opening it it gave me the error invalid size. Also, after installing TWRP to option for clockwork mod disappeared on my moboot. So through intrernalz pro on web os I was able to remove the uimage of twrp from the boot folder, but that left me with only the option to boot into cyanogenmod and no type of recovery option available. I tried using acmeinstaller2, to just install CWM but after restarting there was nothing added to my moboot. I am sort of at a stand still since with out a recovery i cant update, nor can i recover from a back up. Any help would be appreciated. Thanks guys.
- Zero
Click to expand...
Click to collapse
Do you still have "ulmage.ClockworkMod" in the boot folder, it sounds like it must be gone or it should show up as an option in moboot? With mine when I installed TWRP it didn't change the options in moboot, moboot still says ClockworkMod but when that is selected it goes into TWRP and there is no "ulmage.TWRP" in my boot folder. I thought that was how TWRP was meant to install on the TP. I'm not sure if there is another way to install CWM other than with the ACME2installer, might be worth a search.
Did you make sure "update-cwm_tenderloin-1012" was in the "cminstall" folder when you ran ACME2?
You could move your backup to comp, run ACMEuninstaller and webos doctor and start from scratch and install CM9. Then just restore from your backup. I've done that a few times for other reasons.
Good Luck

Thanks for the help man, the CWM i was using was called recovery_cwm and i just had to change the name to update_cwm and let acmeinstaller do the rest. Saved me alot of time by avoiding uninstalling everything and restoring.
- Zero

CWM gone while installing TWRP through gooMan
Hi Zero,
Sorry but I am totally new to android and on how to install it in my TP. But, I was successfully running Cyanogenmod for sometime now until I thought of installing TWRP in my TP instead of CWM as installing nightly updates was becoming difficult for me.
I tried to install twrp through gooManager so that I would have both the option of Clockworkmod and twrp. SInce twrp is a better ui, I thought of using it instead of ClockworkMod.
So, I went to their site: teamw.in/project/twrp2/75
and followed the following:
Install the app and open it. Tap menu then hit Install OpenRecoveryScript. Tap Yes. Verify that the filename displays your device's code name and hit Yes. The file will download and your device will reboot and install the recovery automatically.
By doing so, it did not reboot but while I tried to reboot myself, I saw that the ClockWorkMod menu is gone from moboot and I have no recovery option left. The menu has 'Boot TWRP' but when selecting that, it says corrupt data and my TP hangs.
Please guide me in getting CWM back or get the TWRP.
Please help!!! Thanks in anticipation.

avisekhg said:
Hi Zero,
Sorry but I am totally new to android and on how to install it in my TP. But, I was successfully running Cyanogenmod for sometime now until I thought of installing TWRP in my TP instead of CWM as installing nightly updates was becoming difficult for me.
I tried to install twrp through gooManager so that I would have both the option of Clockworkmod and twrp. SInce twrp is a better ui, I thought of using it instead of ClockworkMod.
So, I went to their site: teamw.in/project/twrp2/75
and followed the following:
Install the app and open it. Tap menu then hit Install OpenRecoveryScript. Tap Yes. Verify that the filename displays your device's code name and hit Yes. The file will download and your device will reboot and install the recovery automatically.
By doing so, it did not reboot but while I tried to reboot myself, I saw that the ClockWorkMod menu is gone from moboot and I have no recovery option left. The menu has 'Boot TWRP' but when selecting that, it says corrupt data and my TP hangs.
Please guide me in getting CWM back or get the TWRP.
Please help!!! Thanks in anticipation.
Click to expand...
Click to collapse
If you have the install zip from sd card option, then flash jcsullins' recovery. Use the 12/15 version.
You can also install the same recovery using acmeinstaller 3.
There's a moboot cleaning utility, on the classic nerds' site (use it if you need to get rid of 'ghost' uimages).
Edit : here's the link to jcsullins' recovery : http://goo.im/devs/jcsullins/cmtouchpad/recovery
Edit 2 : here's another link that would be useful : http://forum.xda-developers.com/showthread.php?t=2030675&page=4

Related

ROM Manager Reboot?

Slight issue here, not sure if anyone has had it before.
Just acquired a Captivate as an xmas gift to myself (sick of that iPhone), and began the whole process of getting a new ROM onto it. Rooted, installed ROM Manager, flashed a clockworkmod recovery (2.5.1.2), and hit "Backup Current ROM".
The device reboots into the standard recovery mode with the usual options (reboot system now, reinstall packages, delete all user data, delete cache data).
No backup is made, and I just have to continue the reboot. I've tried flashing to an older version, clearing the download cache, and using the option to go to ROM Manager's recovery mode (just takes me to the default recovery boot).
Am I doing something wrong here? I followed all of the instructions step by step.
Velshtein said:
Slight issue here, not sure if anyone has had it before.
Just acquired a Captivate as an xmas gift to myself (sick of that iPhone), and began the whole process of getting a new ROM onto it. Rooted, installed ROM Manager, flashed a clockworkmod recovery (2.5.1.2), and hit "Backup Current ROM".
The device reboots into the standard recovery mode with the usual options (reboot system now, reinstall packages, delete all user data, delete cache data).
No backup is made, and I just have to continue the reboot. I've tried flashing to an older version, clearing the download cache, and using the option to go to ROM Manager's recovery mode (just takes me to the default recovery boot).
Am I doing something wrong here? I followed all of the instructions step by step.
Click to expand...
Click to collapse
Try doing "reinstall packages".
Steps:
1. Copy the clockwork recovery "update.zip" attached to this post to ur sdcard root.
2. Reboot to recovery.
3. Select "reinstall packages".
4. It would say something like replacing recovery with clockwork recovery, and reboot into recovery. This happens only the first time u use this.
5. Select "reinstall packages" again.
6. You should be in clockwork recovery.
diablo009 said:
Try doing "reinstall packages".
Steps:
1. Copy the clockwork recovery "update.zip" attached to this post to ur sdcard root.
2. Reboot to recovery.
3. Select "reinstall packages".
4. It would say something like replacing recovery with clockwork recovery, and reboot into recovery. This happens only the first time u use this.
5. Select "reinstall packages" again.
6. You should be in clockwork recovery.
Click to expand...
Click to collapse
Good deal. Worked perfectly. Out of curiosity, do we know why the phone was doing this?
Velshtein said:
Good deal. Worked perfectly. Out of curiosity, do we know why the phone was doing this?
Click to expand...
Click to collapse
Ok. I'll explain to the best of my knowledge.
The zip I gave u is the most non-intrusive way of CWM. No ROM manager installer is needed on phone apart from placing this zip on sdcard root.
When the phone boots up, it loads the default recovery console. When we select "reinstall packages", it loads "update.zip" on the sdcard root by default. Since the update.zip we have there is the CWM zip, it loads it therby loading CWM console.
If u don't want CWM, just delete this update.zip.
Hope this helps.
I have this exact same issue ROM Manager is doing nothing but rebooting into recovery. So if I use your workaround, I need to keep this update.zip file on my device at all times?
NISMOFO said:
I have this exact same issue ROM Manager is doing nothing but rebooting into recovery. So if I use your workaround, I need to keep this update.zip file on my device at all times?
Click to expand...
Click to collapse
Yes best to do so
All ROM Manager does is download the update.zip that was posted and put it on your SD Card. The other steps need to be done regardless.
MikeyMike01 said:
All ROM Manager does is download the update.zip that was posted and put it on your SD Card. The other steps need to be done regardless.
Click to expand...
Click to collapse
I got the ROM backup working. I guess I was too impatient the first time. I cleared/moved a lot of stuff off my internal SD card too....doubt that it mattered.
But it works quite well.

TWRP Install renames to CWM - I want both

I downloaded the new 2.1 TWRP and installed it using CWM I discovered that on the moboot menu it still reads CWM but boots TWRP. I would like to keep both on the tablet for now. Any ideas on how to install CWM and have both TWRP and CWM show up on the mobbot menu? Thanks.
buffalo_guy said:
I downloaded the new 2.1 TWRP and installed it using CWM I discovered that on the moboot menu it still reads CWM but boots TWRP. I would like to keep both on the tablet for now. Any ideas on how to install CWM and have both TWRP and CWM show up on the mobbot menu? Thanks.
Click to expand...
Click to collapse
Fastboot CWM again.
I did it last night and now I am stuck with both. I wanted only CWM but I can't get rid of TWRP. When I hit reboot to recovery, I go to TWRP but I can choose CWM from Moboot.
Sent from my Galaxy Nexus using xda app-developers app
Solved with another method
SOLVED: I since have learned that TWRP replaces CWM and as a convenience to the user and renames TWRP so it appears as CWM for purposes of going into recovery. There were a number of solutions to add back CWM. The one I used requires a file manager with root access. I extracted the CWM image from the zip file and copied it into the boot directory and renamed it uimage.CWM2. I reset the permissions to match the the other moboot images found in boot. Once the tablet is restarted moboot inventories the images found in boot and adds them to the menu. For the time being I now have both TWRP and CWM. The only caution is to make sure you have enough room in the boot directory. You can also remove entries from the moboot menu by deleting image files. Proceed with caution and always backup before proceeding.

Boot loop problem

Hello,
I tried installing a custom ROM on my 7310 and it had issues. I have tried installing the original ICS from the sammyfirmware site using ODIN. Now I have a boot loop. I think I need to repartition, but when I click the repartition checkbox in ODIN I get an error.
Do I need to repartition? If so, how do I do it? If not, how do I fix this error?
Thanks.
A few questions:
spazlon said:
I tried installing a custom ROM on my 7310 and it had issues.
Click to expand...
Click to collapse
What did you try to flash and how did you try doing it (CWM, ODIN, ...)?
What 'issues'?
I have tried installing the original ICS from the sammyfirmware site using ODIN. Now I have a boot loop.
Click to expand...
Click to collapse
How far into the boot sequence does it get?
Are you able to get into recovery?
If so, what recovery do you have (Stock vs CWM)?
Have you tried seeing what is causing the boot-loop using adb?
Do I need to repartition? If so, how do I do it? If not, how do I fix this error?
Click to expand...
Click to collapse
This is an action of last resort. Exhaust all other avenues first.
boscorama said:
What did you try to flash and how did you try doing it (CWM, ODIN, ...)?
What 'issues'?
Click to expand...
Click to collapse
I used CWM to flash AOSP 4.1.2. It seemed to work fine for a day or two, but then it needed charging (as normal). I let it charge over night and in the morning it had less battery. I figured the charger or cable were flaky so I tried another set on another outlet and same thing. Then it finally ran out of battery. I let it charge again over night and when I tried to turn it on it was really slow. The boot animation was only 1 frame every couple seconds. It would eventually boot all the way up, but it was still REALLY slow. So I went into CWM and reflashed the same ROM. Then I got a boot loop of the boot animation. I couldn't get into CWM any more, so then I went into download mode and flashed the official firmware and flashed it with ODIN.
boscorama said:
How far into the boot sequence does it get?
Click to expand...
Click to collapse
Now when I turn it on it just says, "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
I can flash again with ODIN and it will get to the Samsung boot animation and just pulse SAMSUNG.
boscorama said:
Are you able to get into recovery?
If so, what recovery do you have (Stock vs CWM)?
Click to expand...
Click to collapse
If I hold power and volume down I can get into download mode or Samsung recovery, not CWM, and power with volume up doesn't do anything.
boscorama said:
Have you tried seeing what is causing the boot-loop using adb?
Click to expand...
Click to collapse
I don't know anything about adb and I'm not sure what I would be looking for. Is there a tutorial I can follow somewhere?
Thanks for any help!
This worked for me with similar problem
Hi Spazlon,
Sorry I'm not allowed to post links yet as I am also very fresh. But I've underlined the addresses so you should be able to find them
I just spent the best of 2 days trying to solve a similar issue - my 8.9 P7300 kept running in boot loop. It had been running ICS stable for several weeks, then suddenly started to loop boot for no good reason. Anyway - you need two programs installed on your computer as well as USB drivers for your tablet. The two programs are Odin and SDK developer package. Odin3 v 1,87 and 1.85 are found here: filecrop.com/Odin-1.87 - try some of the links, one of them should work without having to type a password. The SDK is found here: developer.android.com/sdk You can find more about how to use the developer package on that site as well, but I installed as support for Android 2.1 through to 4.1
Also install the USB driver files for your tablet on your PC. For example from here: xpdrivers.com/usb/_1_24.cfm?gclid=CL2iDs7MCFWF7cAodxFYANQ
You also need the following recovery files which you can find by searching the developer forum for galaxy tab 8.9:
ClockworkMod_Recovery_v5.5.0.4.tar
P73xx_Stock_Recovery.tar
Clockwork_Recovery_6.0.0.8_GT-P7300.zip
and finally a ROM of your choice, for example the ICS rom cm-9-20121028-NIGHTLY-p5.zip that I just used. You can find the latest official ICS ROM's here get.cm/?device=p5
Now - hold down the volume down button on one of the boot cycles. You should now get into a menu with two choices - Download and Recovery. Default is "Download" - if you press volume down you switch between the two choices. Press volume up to select the choice you want.
First you want to select the "Download" option. Then connect your tablet to your PC. The drivers should now install and your tablet should read that you are connected.
Now start Odin3. Click the PDA button and select your P73xx_Stock_Recovery.tar file. Then press Start.
Once finished the tablet will reboot, and you now need to once again get into the recovery menu. Now select the recovery option, not the download menu. You get into the stock recovery menu where you navigate with the volume buttons and select choices with the power button. Do a full factory reset and wipe the cache. WARNING - you will loose ALL your data, but it'either that or stick to a bricked tablet so.... You will also loose your root access,m which is why the next step is needed.
Now that everything is wiped clean you can use Odin again in "download mode" to install ClockworkMod_Recovery_v5.5.0.4.tar with the same procedure as before. You now have root access.
Reboot again and once again into the recovery mode (not download mode). Once you get into the CWM recovery menu you are ready for the final step, which is to install your new operating system.
Go to your SDK installation folder and find the folder named "platform-tools".
First you want to copy two files into this folder (provided you want to install Cynaogen Mod 9):
Clockwork_Recovery_6.0.0.8_GT-P7300.zip
and
Your ROM file of choice
Press shift and right-click in that folder and select "Open command window here". In the command prompt write
adb shell
Note - I had some problems here which was caused by lack of permissions. On your tablet in the CWM menu there should be a choice under the advanced menu for fixing permissions. Use that and you should be able to get into the terminal shell afterwards with the adb shell command
Now write the following command sequence:
• mount /data (don't worry if you get an error message - it means the folder is already mounted)
• cd /data
• mkdir media (if you get an error message saying the folder already exists, that's also OK!)
• exit
• adb push Clockwork_Recovery_6.0.0.8_GT-P7300.zip /data/media
Now you may have to wait a little while until your command prompt is back confirming that the file was uploaded.
Now on your tablet go to the menu point "install zip from sdcard" and find your CWM file that you just uploaded and run that.
Reboot once again into the "recovery mode" - we are now nearly finished.
Run the above push command again from the computer terminal window, this time to upload the ROM file you want to install. (the command is adb push [filename].zip /data/media)
Now on your CWM recovery menu once again run the zip file you just uploaded from the "install zip from sdcard" menu
When completed and you now reboot you should have a completely fresh android installation. Hope this helps.
Remember to mark this thread with solved if it works!
Thanks to kallt_kaffe and all the others who helped me through their various posts (hope that coffee isn't getting too cold again), as well as the following web sites that indirectly helped me resolve this issue googleymind.com/2011/11/guide-so-you-think-you-bricked-your.html#.UJUNN8XAd8G and galaxytabhacks.com/galaxy-tab-10-1-hacks/how-to-root-galaxy-tab-10-1-the-easy-way/
Good luck.
Thanks! I'll give this a try when I get home. I'll let you know how it works out.
Don't ever try to 'repartion unless you really know what you're doing. You're soft bricked. Repartion and you'll hard brick.
I'd go back and get hc from sammobile and flash that with Odin. Ics has had some problems.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
jd1639 said:
Don't ever try to 'repartion unless you really know what you're doing. You're soft bricked. Repartion and you'll hard brick.
I'd go back and get hc from sammobile and flash that with Odin. Ics has had some problems.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Click to expand...
Click to collapse
Agreed - my procedure avoids manual repartitioning - I tried lots of other procedures but none worked. I think my data partition had become corrupt because I kept getting error messages. My first try was to recover with my cwm recovery file I made originally but I kept getting back to the boot loop .
spazlon said:
Hello,
I tried installing a custom ROM on my 7310 and it had issues. I have tried installing the original ICS from the sammyfirmware site using ODIN. Now I have a boot loop. I think I need to repartition, but when I click the repartition checkbox in ODIN I get an error.
Do I need to repartition? If so, how do I do it? If not, how do I fix this error?
Thanks.
Click to expand...
Click to collapse
I always got something like that ...
After bootloop just go to recrovery mode then factory riset ... its 100% WORK
Sent from my GT-P7300 using xda premium
I followed the steps outlined by mobjunky and was able to get an official Honeycomb ROM installed, boot the official and copy my custom ROM and CWM 6.0.0.8 on it. Then install CWM 5.4.0.4 followed by 6.0.0.8.
Now my problem is that any custom ROM I put on there just does a boot screen loop. I tried CM10 and the latest AOSP. To install the ROMs I just booted into CWM, installed the ROM from zip, then installed the gapps. I've tried with and without formatting the cache, user data, and Dalkiv, same results.
What am I doing wrong? I have loaded tons of ROMs on this before without any issues, then all of a sudden I can't get anything except official loaded.
spazlon said:
I followed the steps outlined by mobjunky and was able to get an official Honeycomb ROM installed, boot the official and copy my custom ROM and CWM 6.0.0.8 on it. Then install CWM 5.4.0.4 followed by 6.0.0.8.
Now my problem is that any custom ROM I put on there just does a boot screen loop. I tried CM10 and the latest AOSP. To install the ROMs I just booted into CWM, installed the ROM from zip, then installed the gapps. I've tried with and without formatting the cache, user data, and Dalkiv, same results.
What am I doing wrong? I have loaded tons of ROMs on this before without any issues, then all of a sudden I can't get anything except official loaded.
Click to expand...
Click to collapse
Sorry - being a newbie myself I'm at a loss. It worked a charm for me.
spazlon said:
I followed the steps outlined by mobjunky and was able to get an official Honeycomb ROM installed, boot the official and copy my custom ROM and CWM 6.0.0.8 on it. Then install CWM 5.4.0.4 followed by 6.0.0.8.
Now my problem is that any custom ROM I put on there just does a boot screen loop. I tried CM10 and the latest AOSP. To install the ROMs I just booted into CWM, installed the ROM from zip, then installed the gapps. I've tried with and without formatting the cache, user data, and Dalkiv, same results.
What am I doing wrong? I have loaded tons of ROMs on this before without any issues, then all of a sudden I can't get anything except official loaded.
Click to expand...
Click to collapse
did a format /system before installing the custom roms? This is an important step.
prince93 said:
did a format /system before installing the custom roms? This is an important step.
Click to expand...
Click to collapse
This fixed it. Never had to do it with any of my other devices. CM10 loaded quickly after that. Loving how fast JB is!
Thanks!
Sent from my GT-P7310 using Tapatalk HD
It worked
mobjunky said:
Hi Spazlon,
Sorry I'm not allowed to post links yet as I am also very fresh. But I've underlined the addresses so you should be able to find them
I just spent the best of 2 days trying to solve a similar issue - my 8.9 P7300 kept running in boot loop. It had been running ICS stable for several weeks, then suddenly started to loop boot for no good reason. Anyway - you need two programs installed on your computer as well as USB drivers for your tablet. The two programs are Odin and SDK developer package. Odin3 v 1,87 and 1.85 are found here: filecrop.com/Odin-1.87 - try some of the links, one of them should work without having to type a password. The SDK is found here: developer.android.com/sdk You can find more about how to use the developer package on that site as well, but I installed as support for Android 2.1 through to 4.1
Also install the USB driver files for your tablet on your PC. For example from here: xpdrivers.com/usb/_1_24.cfm?gclid=CL2iDs7MCFWF7cAodxFYANQ
You also need the following recovery files which you can find by searching the developer forum for galaxy tab 8.9:
ClockworkMod_Recovery_v5.5.0.4.tar
P73xx_Stock_Recovery.tar
Clockwork_Recovery_6.0.0.8_GT-P7300.zip
and finally a ROM of your choice, for example the ICS rom cm-9-20121028-NIGHTLY-p5.zip that I just used. You can find the latest official ICS ROM's here get.cm/?device=p5
Now - hold down the volume down button on one of the boot cycles. You should now get into a menu with two choices - Download and Recovery. Default is "Download" - if you press volume down you switch between the two choices. Press volume up to select the choice you want.
First you want to select the "Download" option. Then connect your tablet to your PC. The drivers should now install and your tablet should read that you are connected.
Now start Odin3. Click the PDA button and select your P73xx_Stock_Recovery.tar file. Then press Start.
Once finished the tablet will reboot, and you now need to once again get into the recovery menu. Now select the recovery option, not the download menu. You get into the stock recovery menu where you navigate with the volume buttons and select choices with the power button. Do a full factory reset and wipe the cache. WARNING - you will loose ALL your data, but it'either that or stick to a bricked tablet so.... You will also loose your root access,m which is why the next step is needed.
Now that everything is wiped clean you can use Odin again in "download mode" to install ClockworkMod_Recovery_v5.5.0.4.tar with the same procedure as before. You now have root access.
Reboot again and once again into the recovery mode (not download mode). Once you get into the CWM recovery menu you are ready for the final step, which is to install your new operating system.
Go to your SDK installation folder and find the folder named "platform-tools".
First you want to copy two files into this folder (provided you want to install Cynaogen Mod 9):
Clockwork_Recovery_6.0.0.8_GT-P7300.zip
and
Your ROM file of choice
Press shift and right-click in that folder and select "Open command window here". In the command prompt write
adb shell
Note - I had some problems here which was caused by lack of permissions. On your tablet in the CWM menu there should be a choice under the advanced menu for fixing permissions. Use that and you should be able to get into the terminal shell afterwards with the adb shell command
Now write the following command sequence:
• mount /data (don't worry if you get an error message - it means the folder is already mounted)
• cd /data
• mkdir media (if you get an error message saying the folder already exists, that's also OK!)
• exit
• adb push Clockwork_Recovery_6.0.0.8_GT-P7300.zip /data/media
Now you may have to wait a little while until your command prompt is back confirming that the file was uploaded.
Now on your tablet go to the menu point "install zip from sdcard" and find your CWM file that you just uploaded and run that.
Reboot once again into the "recovery mode" - we are now nearly finished.
Run the above push command again from the computer terminal window, this time to upload the ROM file you want to install. (the command is adb push [filename].zip /data/media)
Now on your CWM recovery menu once again run the zip file you just uploaded from the "install zip from sdcard" menu
When completed and you now reboot you should have a completely fresh android installation. Hope this helps.
Remember to mark this thread with solved if it works!
Thanks to kallt_kaffe and all the others who helped me through their various posts (hope that coffee isn't getting too cold again), as well as the following web sites that indirectly helped me resolve this issue googleymind.com/2011/11/guide-so-you-think-you-bricked-your.html#.UJUNN8XAd8G and galaxytabhacks.com/galaxy-tab-10-1-hacks/how-to-root-galaxy-tab-10-1-the-easy-way/
Good luck.
Click to expand...
Click to collapse
WOw! This fixed my Tablet! thank you ever so much!!
mjramos15 said:
WOw! This fixed my Tablet! thank you ever so much!!
Click to expand...
Click to collapse
mobjunky said:
Hi Spazlon,
Sorry I'm not allowed to post links yet as I am also very fresh. But I've underlined the addresses so you should be able to find them
I just spent the best of 2 days trying to solve a similar issue - my 8.9 P7300 kept running in boot loop. It had been running ICS stable for several weeks, then suddenly started to loop boot for no good reason. Anyway - you need two programs installed on your computer as well as USB drivers for your tablet. The two programs are Odin and SDK developer package. Odin3 v 1,87 and 1.85 are found here: filecrop.com/Odin-1.87 - try some of the links, one of them should work without having to type a password. The SDK is found here: developer.android.com/sdk You can find more about how to use the developer package on that site as well, but I installed as support for Android 2.1 through to 4.1
Also install the USB driver files for your tablet on your PC. For example from here: xpdrivers.com/usb/_1_24.cfm?gclid=CL2iDs7MCFWF7cAodxFYANQ
You also need the following recovery files which you can find by searching the developer forum for galaxy tab 8.9:
ClockworkMod_Recovery_v5.5.0.4.tar
P73xx_Stock_Recovery.tar
Clockwork_Recovery_6.0.0.8_GT-P7300.zip
and finally a ROM of your choice, for example the ICS rom cm-9-20121028-NIGHTLY-p5.zip that I just used. You can find the latest official ICS ROM's here get.cm/?device=p5
Now - hold down the volume down button on one of the boot cycles. You should now get into a menu with two choices - Download and Recovery. Default is "Download" - if you press volume down you switch between the two choices. Press volume up to select the choice you want.
First you want to select the "Download" option. Then connect your tablet to your PC. The drivers should now install and your tablet should read that you are connected.
Now start Odin3. Click the PDA button and select your P73xx_Stock_Recovery.tar file. Then press Start.
Once finished the tablet will reboot, and you now need to once again get into the recovery menu. Now select the recovery option, not the download menu. You get into the stock recovery menu where you navigate with the volume buttons and select choices with the power button. Do a full factory reset and wipe the cache. WARNING - you will loose ALL your data, but it'either that or stick to a bricked tablet so.... You will also loose your root access,m which is why the next step is needed.
Now that everything is wiped clean you can use Odin again in "download mode" to install ClockworkMod_Recovery_v5.5.0.4.tar with the same procedure as before. You now have root access.
Reboot again and once again into the recovery mode (not download mode). Once you get into the CWM recovery menu you are ready for the final step, which is to install your new operating system.
Go to your SDK installation folder and find the folder named "platform-tools".
First you want to copy two files into this folder (provided you want to install Cynaogen Mod 9):
Clockwork_Recovery_6.0.0.8_GT-P7300.zip
and
Your ROM file of choice
Press shift and right-click in that folder and select "Open command window here". In the command prompt write
adb shell
Note - I had some problems here which was caused by lack of permissions. On your tablet in the CWM menu there should be a choice under the advanced menu for fixing permissions. Use that and you should be able to get into the terminal shell afterwards with the adb shell command
Now write the following command sequence:
• mount /data (don't worry if you get an error message - it means the folder is already mounted)
• cd /data
• mkdir media (if you get an error message saying the folder already exists, that's also OK!)
• exit
• adb push Clockwork_Recovery_6.0.0.8_GT-P7300.zip /data/media
Now you may have to wait a little while until your command prompt is back confirming that the file was uploaded.
Now on your tablet go to the menu point "install zip from sdcard" and find your CWM file that you just uploaded and run that.
Reboot once again into the "recovery mode" - we are now nearly finished.
Run the above push command again from the computer terminal window, this time to upload the ROM file you want to install. (the command is adb push [filename].zip /data/media)
Now on your CWM recovery menu once again run the zip file you just uploaded from the "install zip from sdcard" menu
When completed and you now reboot you should have a completely fresh android installation. Hope this helps.
Remember to mark this thread with solved if it works!
Thanks to kallt_kaffe and all the others who helped me through their various posts (hope that coffee isn't getting too cold again), as well as the following web sites that indirectly helped me resolve this issue googleymind.com/2011/11/guide-so-you-think-you-bricked-your.html#.UJUNN8XAd8G and galaxytabhacks.com/galaxy-tab-10-1-hacks/how-to-root-galaxy-tab-10-1-the-easy-way/
Good luck.
Click to expand...
Click to collapse
Gee thanks. This saved my tab. I'd almost given up on it and then voila.

[Q] After Schzoid 22Jul2013, cannot boot to recovery.

I first installed Schizoid 2.10_jb-22Jul2013 and then reverted to skz_tenderloin-2.10_jb_4.2.2-29JUN2013-130837.zip. This is probably my error in installing so I can't blame the ROM. This screwup resulted in wiping out all other boot options so that I could only reboot to Cyangen Mod. Reboot to recovery or bootloader from Schizoid all resulted in a boot back to Schizoid. I've tried using GooManager and Rom Manager but it appears that they cannot get Superuser authority.
SYMPTOMS:
a) In Terminal Emulator, the 'su' command gets '/system/bin/sh: su not found'.
b) GooManager issues 'Preparing to Flash' message but never does the command.
c) Rom Manager issues "You must root your phone fo ROM Manager to function. Superuser was not found at "/system/bin/su" or "system/xbin/su" Use Google Search on you computer to find instructions to root your phone.'
d) Tried installing CWM recovery from ROM Manager but get 'Unspported Device'.
d) I tried pressing down both the Power and Home buttons but I get 'Please release keys'.
While it appears that the ROM works OK for most apps and I have a USB device driver that works, I'd like to be able to backup and update when improvements are made.
SOLUTION:
I first tried holding the HOME and POWER buttons but that did nothing. I then tried holding down both the Power and Volume Up buttons at startup. This brings up the USB logo on the screen. I have it tethered to my computer running Windows 7. This failed to install the Palm device driver. I had to download WebOS Docter 3.0.5 to go back to Web OS stock.
The following link walks you through the re-install process.
http://theunlockr.com/2011/10/18/how...e-hp-touchpad/
You need an account with HP WebOS. Here's the link for the download of WebOS.
http://ws.hpwebos.com/webosdoctor/webosdoctor.htm?
The process took over an hour but I was able to boot to the stock HP WebOS. I did not lose my data files but it wiped out all my boot-loader and Android entries.
After the return to stock, I followed the very detailed instructions to install CWM recovery (Great stuff!):
http://forum.xda-developers.com/wiki/HP_Touchpad
The only thing different I would suggest is to download ACMEInstaller3 instead of ACMEInstaller2. I had a problem later that caused me to repeat the process again which I think is a result of the way ACMEInstaller2 divides the partitions.
My process came up with CWM recovery, WEB OS, and WEB OS recovery on the boot menu. From here I installed Cyanagenmod 9. After booting to CM 9, I installed GooManager and the latest TWRP. A boot to TWRP allowed a restore of my good backup and a return to my setup prior to the screwup and brought me back to my regular setup.
Get USB sign with Power and Volume UP
See main text above.
Re-install WebOS
See main text above.
Restoring Multiboot with CM9
See main text above.

[Q] Brick Help vs980 LG G2

Currently irate because I already typed all this then hit enter to be told I can only register once from this ip.
Any way...
Rooted vs98027a Android 4.4.2 via Stump Root
Used AutoRec which installed TWRP 2.7.00
Backed up Stock Rom
Mount button is missing
Rebooted into Stock to transfer backup to PC and place "cm-12-20150603-NIGHTLY-vs980.zip" as well as Lp gapps.
Rebooted back into TWRP
Wiped, then Installed the CM Nightly, wiped cache and rebooted.
Stuck in LG Boot loop.
Use buttons to boot back into TWRP, open Restore and It's just a blank navigation window.
TWRP just became ****ing worthless
Tried to wipe and possibly install same CM again. Still boot looping.
Tried getting to download mode, but it reboots before installing driver.
I have not a clue as to what to do next.
I can't get it to mount.
ADB Sideload Fails.
Terminal Command lets me select a blank navigation window.
And my original file structure is in like sdcard/0/0/0/0/0/0/0/0/ etc.
Please help, or at least redeem CM and TWRP's value somehow, because this is bs.
I sort of fixed it.
Restore showed up blank, because within the many /0/0/0/0/0/0/0/0 a new TWRP folder would be made or course containing nothing.
I also learned the adb is this magnificent goddess that can do things even when your phone can't.
Throughout further reading I glimpsed upon something about "loki" files that aren't compatible with specific versions of twrp or something. So If you've also been through this and still feel brave enough to flash a custom, then make sure you get the newest version of twrp...
As for the Restore issue, assuming you have a backup saved on pc, wipe everything then adb push the whole file (TWRP/BACKUPS/BLAHBLAH/BLAUGHESDIHF) to /sdcard/.... then it should show up in restore, if it doesn't then use file manager to place it in the right TWRP directory... You can also use the file manager to move the restore folder to the "correct" twrp folder if you don't have it backed up.

Categories

Resources