{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hello All!!!
This is my phenomenal kernel for gs3.
Many users know my kernel for gs2.
My goals: battery and performances. NO TOO MUCH TWEEKS!!! THERE ARE OTHERS VERY GOOD KERNEL FOR THESE.
CHANGELOG 3.0
based on samsung update 4...ramdisk from XXBLG8. For extreme version: internal cpu voltages from -100mv to -50mv
Extreme:
cpu arm : -125mv to all freq
cpu internal: -50mv to all freq
bus: -100mv to all freq
gpu: -100mv to all freq
CWM: http://dl.dropbox.com/u/33360162/phenomenalGS33.0/Phenomenal3.0Extreme.zip
Medium:
cpu arm : -100mv to all freq
cpu internal: -50mv to all freq
bus: -100mv to all freq
gpu: -50mv to all freq
CWM: http://dl.dropbox.com/u/33360162/phenomenalGS33.0/Phenomenal3.0Medium.zip
Normal:
cpu arm : -75mv to all freq
cpu internal: -50mv to all freq
bus: -50mv to all freq
gpu: -50mv to all freq
CWM: http://dl.dropbox.com/u/33360162/phenomenalGS33.0/Phenomenal3.0Normal.zip
CHANGELOG 2.0:
based on samsung update 3...ramdisk from XXLFB
Extreme:
CWM: http://dl.dropbox.com/u/33360162/phenomenalGS32.0/Phenomenal2.0Extreme.zip
Medium:
CWM: http://dl.dropbox.com/u/33360162/phenomenalGS32.0/Phenomenal2.0Medium.zip
Normal:
CWM: http://dl.dropbox.com/u/33360162/phenomenalGS32.0/Phenomenal2.0Normal.zip
CHANGELOG 1.0
We have 3 versions: Normal, Medium, Extreme.
Why 3 versions? Because every version has a set of different voltages. Not all cpu are the same, so choose what is better for your phone. If voltages are not supported by your phone, your phone will be freeze (you must remove battery....this is not dangerous for phone).
What version use?
If you don't want try which is best for your phone, install Normal version (same voltages of phenomenal 0.1) that is stable for all phones.
If you want find your best version, install extreme...if your phone works good and doesn't freeze, keep this; if not install medium. Again, if your phone works good with medium and doesn't freeze, keep this; if not install normal
Changelog is the same of 0.1, but we have different voltages for 3 versions:
Extreme:
cpu arm : -125mv to all freq
cpu internal: -100mv to all freq
bus: -100mv to all freq
gpu: -100mv to all freq
CWM: http://dl.dropbox.com/u/33360162/phenomenalGS31.0/Phenomenal1.0Extreme.zip
Medium:
cpu arm : -100mv to all freq
cpu internal: -50mv to all freq
bus: -100mv to all freq
gpu: -50mv to all freq
CWM: http://dl.dropbox.com/u/33360162/phenomenalGS31.0/Phenomenal1.0Medium.zip
Normal:
cpu arm : -75mv to all freq
cpu internal: -50mv to all freq
bus: -50mv to all freq
gpu: -50mv to all freq
CWM: http://dl.dropbox.com/u/33360162/phenomenalGS31.0/Phenomenal1.0Normal.zip
0.1 changelog is:
Based on i9300 samsung update 1
ramdisk from stock LF2 kernel
Insecure kernel
disable various logs, traces and debugs
All working modules (also exfat)
Various integrated undervolting:
cpu arm : -75mv to all freq
cpu internal: -50mv to all freq
bus: -50mv to all freq
gpu: -50mv to all freq
CWM: http://dl.dropbox.com/u/33360162/phenomenalGS30.1/Phenomenal0.1.zip
ODIN: http://dl.dropbox.com/u/33360162/phenomenalGS30.1/Phenomenal0.1.tar
I want test these values.
After, I can release others phenomenal version.
As in gs2, will be: normal, medium,extreme versions, based on different voltages
IF YOU DON'T LIKE UV, DON'T USE THIS KERNEL!
Thanks to simone201 for great support!
Thanks to whiskeybro for banner
source based on samsung update 4 (toolchain, ramdisk included)
http://dl.dropbox.com/u/33360162/phenomenalGS33.0/phenomenalGS3.tar.gz
in build.sh change some absolute paths and launch it to compile
UPDATES:
Every updates consists of replacing same folders/files over original phenomenal source...we can replace folders/files of normal, medium or extreme version
3.0 Updated:
http://dl.dropbox.com/u/33360162/phenomenalGS33.0/updatePhenomenal3.0.zip
reserved
Ti voglio bene! Grazie mile!
Enviado desde mi GT-I9300 usando Tapatalk 2
removed "beta"
Loved your kernel on SGS2 going to try this noww. Thanks
It works marvelous atm. And having the great battery life I expect from a Phenomenal Kernel.
Enviado desde mi GT-I9300 usando Tapatalk 2
how to use this kernel? what are the benefits of this kernel? how to use u.v?
n70shan said:
how to use this kernel? what are the benefits of this kernel? how to use u.v?
Click to expand...
Click to collapse
Install it and enjoy, nothing else needed
UV is BY DEFAULT and it cannot be customized
Been using this last 4 or 5 hours, giving it some hammer. Seems stable enough, will test battery life tomorrow after a full charge.
Sent from my GT-I9300 using xda premium
simone201 said:
Install it and enjoy, nothing else needed
UV is BY DEFAULT and it cannot be customized
Click to expand...
Click to collapse
Oooo simo! Release your kernel!
fenomeno83 said:
Oooo simo! Release your kernel!
Click to expand...
Click to collapse
It's finished now finally....time to release it (tomorrow)
Sent from my GT-I9300 using Tapatalk 2
simone201 said:
It's finished now finally....time to release it (tomorrow)
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
Great news!
Waiting...
Thanks.
Thank u. Installed. Works.
Will you play with screen voltage?
Sent from my GT-I9300 using xda premium
Trying it...
Enviado desde mi GT-I9300
I have problems to connect the phone to the PC. Only one time it worked but the PC didn't see the external memory.
Battery life is better than Insecure Kernel and I didn't notice differences in speed. I'm wainting for extreme version.
MattyDip said:
Battery life is better than Insecure Kernel and I didn't notice differences in speed. I'm wainting for extreme version.
Click to expand...
Click to collapse
this is what i expected
Hi, is this for Sammy roms? Thanks.
Sent from my GT-I9300 using xda premium
steve17360 said:
Hi, is this for Sammy roms? Thanks.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Yes
Related
The Ace Kernel-OC/Non-OC
FEATURES
Two versions-OC/Non-OC in single installer(Amarullz aroma installer).
Cleancache and frontswap support.
3 new frequencies to the overclocked kernel between 480 and 787 Mhz,i.e.,604,672 and 729.
Frequencies supported-OC-Version
122,200,245,320,480,604,672,729,787,806,825,844,864,883,902,921,940,960.
Frequencies supported-Non-OC-Version-
122,200,245,320,480,604,672,729,768,800
.Customizable governor adding and enabling/disabling logcat during install.
Total 19 cpu governors-
13-Default
Intellidemand
Smartass
Savagedgen
Smartass2
Scary
Performance
Lagfree
Interactive
InteractiveX
Brazillianwax
Ondemand
Conservative
6-Modules
Userspace
Powersave
ondemandx
lionheart
lazy
minmax
Ext4 patches from linux 3.0 kernel
Lib sha1 patches for 10% faster boot
6 I/O Schedulers-noop as default-Others being Deadline,SIO,VR,BFQ and CFQ.
Two way call recording.
Various performance improvements and battery life optimizations to the kernel.
BLN/TUN/CIFS/ZRAM
Some bug fixes
Disabled some logging and debugging options including logcat to improve battery life.If you require logcat you can enable it at boot time through amarulz installer.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
INSTALLATION
Download the zip from download section on project page as stated below on second post, put it in sdcard, reboot into clockworkmod recovery .Follow instructions in amarulz installer.Select OC/Non-OC.Select the next options(Governors/Logcat enable/disable).
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Click to expand...
Click to collapse
WARNING! CARELESS OVERCLOCKING MAY FRY YOUR PHONE.SO USE WITH CAUTION. I AM NOT RESPONSIBLE FOR ANY DAMAGE!
SOURCES
https://github.com/akashnk/android_kernel_samsung_cooper
Click to expand...
Click to collapse
DOWNLOADS
Latest Version-http://code.google.com/p/the-ace-kernel/downloads/detail?name=TheAceKernel-beta4.zip
All Downloads-http://code.google.com/p/the-ace-kernel/downloads/list
SOURCES
The linux kernel is under GPL.Whoever modifies it must share source code.
My sources-https://github.com/akashnk/android_kernel_samsung_cooper
http://code.google.com/p/the-ace-kernel/source/browse/#git%2Fsamsung_kernel_cooper
CHANGELOG
Code:
03/05/12-vBeta4
1.Added and enabled cleancache and frontswap.
2.Rewrote battery code again.
3.Added bfq i/o scheduler.
4.Enabled ksm.
5.Speed up access to cgroupfs mounted entries in /proc/mounts.
6.mmc: core: Fix possible race between runtime suspend and runtime resume.
25/04/2012-vBeta3.1
1.Deep sleep not working on wifi on should be fixed.
2.Modified lulzactive to tegrak lulzactive.
Lulzactive app from market working.
23/04/2012-Beta3
1. Add 3 more governors 13 default and 6 as modules.
2. Ext4 patches from linux 3.0 kernel.
3. change page writeback values.
4. Dm cache enabled
5. Lowered VDD levels of frequencies below 672 Mhz.
6. Add lib sha1 patches for 12% faster boot time.
7. Added ARM CPU topology
8. Fixed USB Tethering
9. use Amarulz installer script installer script.
10.Compiled wifi driver from ar6ksdk 3.0 source.
11.Disabled fsync.
12.Fixed memory leaks.
20/04/2012-Beta2
1.Optimized rcutree-better application responsiveness.
2.Added 3 governors-Intellidemand,Interactive and InteractiveX...Recommend Intellidemand for balanced battery and performance.
3.Removed some changes to drivers.
4.Performance update-removed some bugs and optimize more for performance.
18/04/2012-Initial Release
-Compiled from Samsung Kernel sources using Sourcery G++ Lite
-13 governors and 5 I/O schedulers
-3 new frequencies to overclock code in frequency table between 480 and 787 Mhz.
-Rewrote battery driver code(Thanks Anonymous and LibSc)
-Performance optimisations.Disabled some logging and debugging
-Added 2 way call recording
CREDITS
-Ketut Kumajaya for his source patches.
-Anonymous for his source patches.
-Developers of various kernels like SpeedMod,FreeXperia,Phiexz,TomGiordino etc. and their sources
-Code aurora
-Amarulz for the installer.
-LibiSC for formula showing correct mV
-Samsung for Source Code
-Google for Android.
FAQS
Why is logcat disabled and how do I enable it?
Logcat is a useful service to log and find out whats wrong with the system.But it runs even when it is not required
and eats battery.So I compiled it as module and disabled it by default.
You can enable it at boot by installer
or
To make it permanent Download This script here http://dl.dropbox.com/u/18323177/logcat-enabler.zip and flash it via cwm. If you want to delete it again just delete 37logcat
from /system/etc/init.d.
Click to expand...
Click to collapse
About Governor Modules?
Modules can be selected at boot which can be deleted from /system/etc/init.d later.
or
Governor modules can be loaded in the same way as other module.They are in /system/lib/modules.
e.g.- insmod /system/lib/modules/cpufreq_lionheart.ko
Remove modules
e.g.- rmmod /system/lib/modules/cpufreq_lionheart.ko
Click to expand...
Click to collapse
Why some can overclock to 921 Mhz and some only to 864 Mhz and others different frequency?
Every CPU is unique.The CPU may go upto different frequencies but they were tested for stability at a common 800 Mhz Frequency
only.
Click to expand...
Click to collapse
How to Overclock,Change Schedulers and Governors
You can use apps like No Frills CPU Control,SetCPU,CM settings or write some script yourself
Click to expand...
Click to collapse
What all these governors and schedulers do and how do I know what to use?
Have a look here
http://forum.xda-developers.com/showthread.php?t=1369817
Click to expand...
Click to collapse
First WOW! new Cm kernel
Sent from my GT-I9100 using xda premium
future may be
Welcome back! Will try your kernel
Excellent work
Cool.. will try..
Sent from my GT-S5830 using XDA
Nice work
Cool, hope it does something with the battery life
This is stable at 960 mhz?
Sent from my Nokia 3110i using xda premium
Cool...and, xda frequent question- how the battery life?
Spoiler
sent from my Nokia Pisang
dredremon said:
This is stable at 960 mhz?
Sent from my Nokia 3110i using xda premium
Click to expand...
Click to collapse
As stated in FAQ different phones will be stable at different frequencies.
encik_racun said:
Cool...and, xda frequent question- how the battery life?
Spoiler
sent from my Nokia Pisang
Click to expand...
Click to collapse
I need your feedback. I intend to increase battery life.
Testing now
Sent from my GT-S5830 using Tapatalk
Testing.
Sent from my GT-S5830 using xda premium
Who has tested?
Battery seems a little more consistent, percentage is not fluid thoug (eg 100% -> 91 in around 5 minutes of browsing on wifi).
Nice. This is a fusion of zImage-Mod and blackhawk? I am right? And one question more - why can by the frequency steps more normal - like in non-OC kernel, that means for example 800Mhz instant 806Mhz, or 735 instant 787, that will "look better".
Quadrant score?
Sent from my GT-S5830 using xda premium
dragonnn said:
Nice. This is a fusion of zImage-Mod and blackhawk? I am right? And one question more - why can by the frequency steps more normal - like in non-OC kernel, that means for example 800Mhz instant 806Mhz, or 735 instant 787, that will "look better".
Click to expand...
Click to collapse
I have used some parts of both anonymous and ketut sources and also other sources .
It is not about "looking better".It is about running at real frequency steps.Our Phone does not really run at 800 Mhz but at 787 Mhz.
On a stock Galaxy Ace the CPU gets its clock from different PLL's using dividers. Our device has 3 PLL's running at 245(PLL1), 960(PLL0) and 800(PLL2) MHz. The 480MHz step is using PLL0 divided by 2 and the "800MHz" step uses PLL2 divided by 1.
But this is not all.The PLL speeds are configured with a multiplier that can be configured up 63 (6-bits) and it multiplies with a clock called PLL_TCXO which runs at 19.2MHz. On the Galaxy Ace PLL2 is configred as 41*19.2MHz which means it really isn't running at 800MHz but rather at 787.2MHz.
The same applies for other speeds.
Since my first phenomenal release (for galaxy s2 gingerbread) my first goal was: not so much tweeks, but BATTERY LIFE.
Phenomenal had a great success for galaxy s2 and for galaxy s3. Integrated Undervolting approach likes to many people, and for the first time (thanks to 3 versions) every user can use the most stable version that save more battery on own device, though
not many users don't know nothing about undervolting or don't know how set.
BUT the main problem in galaxy s3 is: stock galaxy s3 kernel has already a good battery life, so many people think: If stock has a good battery that guarantees to use phone for one full day, why must I use a custom kernel?
NOW THERE IS A REALLY IMPORTANT REASON!!!!
The new but obsolete maps of apple can lose people!!!
So main idea is: use your phone as you do usually;
use the extra battery given by phenomenal to find your iphoners friends!!!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
How to use:
Install Phenomenal Kernel using CWM recovery (zip version) or ODIN (tar version)
Use your phone as you do usually
When an iphoner lost, use phenomenal extra battery to find him
Run google maps and save your friend!!!
PHENOMENAL, THE BEST BATTERY EVER!
How ever,we have 3 versions: Normal, Medium, Extreme.
Why 3 versions? Because every version has a set of different voltages. Not all cpu are the same, so choose what is better for your phone. If voltages are not supported by your phone, your phone will be freeze (you must remove battery....this is not dangerous for phone).
What version use?
If you don't want try which is best for your phone, install Normal version that is stable for all phones.
If you want find your best version, install extreme...if your phone works good and doesn't freeze, keep this; if not install medium. Again, if your phone works good with medium and doesn't freeze, keep this; if not install normal
Battery life: Extreme > Medium > Normal > Stock
Stability: Stock = Normal > Medium > Extreme
YOU DON'T NEED TO SET ANITHING!!!! VOLTAGES ARE BUILD IN!!
I SUGGEST TO WIPE CACHE AND DALKIK CACHE AFTER INSTALLING KERNEL.
THIS KERNEL IS ONLY FOR JELLY BEAN GALAXY S3 SAMSUNG BASED ROM!!!
CHANGELOG 4.0
Based on samsung update 5 Jelly Bean
Ramdisk from XXDLIB
Insecure kernel
Disabled various logs, traces and debugs
All working modules (also exfat)
Various integrated undervolting:
Extreme:
cpu arm : -125mv to all freq
cpu internal: -50mv to all freq
bus: -100mv to all freq
gpu: -100mv to all freq
CWM: http://dl.dropbox.com/u/33360162/phenomenalGS34.0/Phenomenal4.0Extreme.zip
ODIN: http://dl.dropbox.com/u/33360162/phenomenalGS34.0/Phenomenal4.0Extreme.tar
Medium:
cpu arm : -100mv to all freq
cpu internal: -50mv to all freq
bus: -100mv to all freq
gpu: -50mv to all freq
CWM: http://dl.dropbox.com/u/33360162/phenomenalGS34.0/Phenomenal4.0Medium.zip
ODIN: http://dl.dropbox.com/u/33360162/phenomenalGS34.0/Phenomenal4.0Medium.tar
Normal:
cpu arm : -75mv to all freq
cpu internal: -50mv to all freq
bus: -50mv to all freq
gpu: -50mv to all freq
CWM: http://dl.dropbox.com/u/33360162/phenomenalGS34.0/Phenomenal4.0Normal.zip
ODIN: http://dl.dropbox.com/u/33360162/phenomenalGS34.0/Phenomenal4.0Normal.tar
MIRROR FOR ALL VERSIONS:
http://www.mediafire.com/?7fzgpmmm932ae9q
OTHER MIRROR:
http://zantekk.de/host/upload/Phenomenal4.0Normal.zip
http://zantekk.de/host/upload/Phenomenal4.0Medium.zip
http://zantekk.de/host/upload/Phenomenal4.0Extreme.zip
ONLY FOR DEVELOPERS
Phenomenal 4.0 base sources
http://dl.dropbox.com/u/33360162/phenomenalGS34.0/phenomenalGS34.0Sources.tar.gz
Updates sources for normal, medium, extreme
http://dl.dropbox.com/u/33360162/phenomenalGS34.0/updatePhenomenal 4.0.zip
OMG fenomen, TY for you hard work, i have been waiting this kernel
Cant wait to try it. Was only waiting for a good kernel to switch to jelly bean.
Now i will give it a try and report back
Thanks for ur hard work... appreciated as always!
Sent from my GT-I9300 using xda premium
awesome
Sent from my omega jellybean powered sgs 3
Finally mate, thank u
Sent from my iPhone Fu**er S3 using CyanogenMod10
thnx man for ur great Kernel
but wt do u mean by update for Extrem,,etc
in the 2nd post ?!
Sent from my GT-I9300 using xda app-developers app
Hi man glad u are back i just bout u a ber te saluto amico....
1YK5279868811441M
P.S. Should we aplay the update from secound post after installation or no?
m4ever007 said:
thnx man for ur great Kernel
but wt do u mean by update for Extrem,,etc
in the 2nd post ?!
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Are only sourcrs for developers
fenomeno83
I've been waiting, and as expected the Phenomenal extreme runs really smooth and fast. Really great work and thanks for your great work.
On ExTweaks or sTweaks I can probably do without the settings under extreme, right?:laugh:
Great! Hahahahahah
Yes mate i will use extra battery life for find my apple friends
Thanks for this new must have
Edit
Soon coming test
XXDLIB H3G Roma
CheckRom v5.5 - Jelly Bean
Inviato dal mio iPhone ****er (GT-I9300)
Tried extreme - froze on boot. Medium is working so far. I think battery life is good.
Exfat with 64gb works great.
Sent from my GT-I9300 using xda premium
Thanks for this!! Can't wait to try it. Does anyone have any comparisons to siyah? I know siyah offers more options - but which gives better battery life?
Can i use STweaks with phenomenal?
I don't see any difference. First stock and then phenomenal medium.
Thankssssssssss
Inviato dal mio GT-I9300 con Tapatalk 2
No diffrent here between v4 medium and stock kernel
Sent from my GT-I9300 using xda app-developers app
worth the try, but is it really significant?
Mind if I ask you if you're gonna release this for cm10 ROMs? Thanks before hand
Enviado desde mi GT-I9300 usando Tapatalk 2
Whoa!!! It's here!
Thanks mate! Downloading all and see which is able to withstand the pressure.
As for the difference between stock and this, you need run like a few full cycle before you are able to see the difference.
Sent from my GT-I9300 using xda app-developers app
Woot ! Thank you
I made this for man to discuss about making a CM kernel for S5570I
It have the same hardware with glx y,like a glx y with different screen size,can use any stock rom of glx y without any modify
Sir hell lock plz post any thing u need help here
Hope this will bring bright to the future of s5570i
I will update this post once i know st new
First all. You can't port ROM without changing Kernel, Keys, and libs. About kernel... hmm... if i have this device i would make one. Cause Pop Plus have 832 Mhz Processor, can OC up-to a Giga-Hertz (Maybe), this phone is NEXT generation of Mini :highfive:
claudiotimo said:
Wow! if you can do that you'll be my god xD . However galaxy mini plus have the same hardware as galaxy y we can ports roms of it, we ony need a cm kernel and possibility for overclock.
Click to expand...
Click to collapse
How about stock kernel but with OC Support ?
Eyes on it. It would be interesting and probably all s5570i owners will pray
I am intrested to in one of those kernels. One that is capable to OC ( up to 1Ghz/or something there) to underclock to 156Mhz ( or something like this) and to undervolt. This can be posibble, right?
F4uzan said:
How about stock kernel but with OC Support ?
Click to expand...
Click to collapse
Can you make one for us (owners of s5570I device) ?
bogdan99999 said:
I am intrested to in one of those kernels. One that is capable to OC ( up to 1Ghz/or something there) to underclock to 156Mhz ( or something like this) and to undervolt. This can be posibble, right?
Click to expand...
Click to collapse
bogdan99999 said:
Can you make one for us (owners of s5570I device) ?
Click to expand...
Click to collapse
UV = Can't be done, somehow the stock kernel are un-voltable (lol, or i was lazy, don't know)
OC = Working on it, since i don't have the device. I test it on my brother Mini Plus, so i will need he got back from school.
Also, OC cannot reach a Giga Hz (1 Ghz), i can only limit it into 982 Mhz, i got 1 Ghz working but it just reboot. On 9xx Mhz it got very hot. On 8xx i got it stable.
So you set OC max freq to 8xx or you let it to 9xx? UC can go down to 1xx? It has ondemand, powersave or smartass v2 scaling on it? "thanks" for helping us
F4uzan said:
UV = Can't be done, somehow the stock kernel are un-voltable (lol, or i was lazy, don't know)
OC = Working on it, since i don't have the device. I test it on my brother Mini Plus, so i will need he got back from school.
Also, OC cannot reach a Giga Hz (1 Ghz), i can only limit it into 982 Mhz, i got 1 Ghz working but it just reboot. On 9xx Mhz it got very hot. On 8xx i got it stable.
Click to expand...
Click to collapse
One dev of our said that under 356mhz can cause reboot then he remove that frequence and the kernel with less frequence but not get reboot
One more,i think the 832mhz working very well,a bit lag but good. Now we need a cm kernel to boot the cm7,hell lock was busy cant help
832 is the default value of freq. it cant lag into that freq. Under 312 it can go into sleep of death ( or something like that ) i dont think it can reboot into that freq.
bogdan99999 said:
832 is the default value of freq. it cant lag into that freq. Under 312 it can go into sleep of death ( or something like that ) i dont think it can reboot into that freq.
Click to expand...
Click to collapse
The freq under 312 causes random reboot
When can you post your work on this kernel that all we waiting for?
Now fixing the OC.
Finally. My Brother are going to his University in US. So i can't meet his Mini Plus until 2014, so sorry everyone.
Here's my last untested work :
1. Fixed OC
OC Up to 1031 Mhz (My brother Mini Plus stable up to 972 Mhz)
2. Undervolted
3. Governors Support :
smartassV2, smartass, MiniX Plus, ondemand, ondemandx, userspace, lionheartX, lionheart, performance, powersave, CPUMaster, etc...
4. I/O Support :
noop, sio, etc...
Tested and Working :
1. OC Up-To 972 Mhz (it's hot !)
2. smartassv2, smartass, and ondemand Governor (other governor are almost make me crazy)
3. noop only I/O
Another features :
1. New Bootsplash by flowish
2. ReNamed kernel version (3.0.8, hehe... )
3. Fixed battery drain
4. Fixed lags in 832 Mhz (thanks to Flowish for his Chocobread)
5. Fixed performance, now 832 Mhz feels like a Giga Hertz (1 Ghz)
6. No Bootanimation (Fastest boot i ever had in Mini Plus)
7. No more fancy things (Improve performance)
Downloads :
1. GigaBoot Kernel (Later... sorry, have no time)
2. PerformanceMaster Kernel (Untested, have 99.00 % Brick chance)
3. Fancy Kernel (Have no time to upload)
so wich one if those 3 kernels is the one that you sugest us? wich one is capable to do everything that you have mention above? Thanks you for doing this kernel.
bogdan99999 said:
so wich one if those 3 kernels is the one that you sugest us? wich one is capable to do everything that you have mention above? Thanks you for doing this kernel.
Click to expand...
Click to collapse
Read new features above !
Merged Performance + Fancy Kernel into EveryDriver Kernel
Currently doing my homework.
Have new features above ! :
GigaBoot Kernel
1. Performance :
Overclock up-to 1 Ghz
Fixed battery drain
Fixed UV
Fix lags
zRam Enabled
Swap enabled
2. Appareance :
ICS Transition animation (Horizontal Animation), lightweight transition too !
No bootanimation by default
Fixed graphic glitch
EveryDriver Kernel
1. Performance :
Overclock up-to 900 Mhz for daily driver
Fixed battery drain
Fix lags
Swap Enabled
2. Appareance :
JB Transition animation (Vertical Animation)
Fixed Graphic glitch
Better 3D Graphics
Better transition
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I will try gigaboot kernel after you post links for downloading. I guess it is stable now, right?
Android_United said:
Click to expand...
Click to collapse
What about facepalm ?
Kernel it's not really stable yet. Since it's untested, also my broadband are suck. I only have 300 Mb left. 300 Mb it's only for syncing repo and updating my Ubuntu.
claudiotimo said:
Can you upload the 1 ghz kernel?? Please.. *___*
Sent from my GT-S5570I using xda app-developers app
Click to expand...
Click to collapse
Can't, my internet only left 190 Mb. My Mom will angry at me if i use it for Android.
OK as i promised i built my kernel.
Before anything i want to thank iodak which gives us nice codes and nice ideas i never took alone, laufersteppenwolf and kholk.
The code is substantially the iodak v1 code but i added some bugfixes from externity project and some Werewolf kernel features.
I'm not the "author" but just for the community i "mixed" all the best i can found actually in the net and during the time i'll research and add some interesting feature i'll found.
The new Revolution version is based on Demetris codes (Optimus Prime-play) but indeed i mixed most of the codes i found on the net.
CHANGELOG and UPDATES
Initial features:
- Same as iodak v1
- CPU at 1.7 ghz
- Optimized ksem algorithm [by Ezeekiel]
- Gpu clock interactive regulation, max frequence 766 mhz but i suggest to not go more than 600 mhz
- Added gaming and pmc cpu governors [Thanks Laufersteppenwolf]
- Temp throttle skin raised at 48 ° C and cpu throttle frequence increased at 1300 mhz
- Lot of bugfixes from Linux developers
V1.5
- implemented uhid support (for usb peripheric but i can't test it)
- modified freeze-wake-standby system (thanks TripNRaVeR)
- added araragi fix for wakelock
- various bugfixes and tweaks
- added cpu topology definitions, new voice in trickstermod for powersaving
- rebased clock table on multiple of 102 mhz for cpu_0 and cpu_g
- some other tweaks and bugfixes
V1.51
- Improved cpu topology code
- Restored interactive number of active cpu selectable
- other various bugfixes
V1.52
- added cfg i/o scheduler
- some other little patch and bugfix
V1.55 "BE CAREFUL, THIS IS NOT STABLE FOR ALL PHONE, I CAN JUST TELL IT'S REALLY STABLE ON MINE"
- raised voltages
- added fastcharge
- rebased all cpu clocks
- unlinked gpu
- raised some clocks
- compiled with Linaro toolchain gcc 4.7.3 13.04
V2
- Various bugfixes from different authors in the net
- Lot of commits from TripNraver optimized kernel for HTC ONE X
- Zram updated with Snappy google compression, it should give more i/o speed
- araragi features with the new inspired by kholk Livecolor code
- HTC ONE X clock table
- LP core voltage table editable in Trickster mod
- Enabled Swap
- Enabled 100 200 and 300 mhz clock step usable
- OC for gpu and ram
- Compiled with Linaro toolchain 4.7.4 and optimizations
- UKSM script ported from 3.0 kernel
- Restored stock thermal framework
V2.1
- New thermal tweaks from demetris
- balanced cpuquiet governor from demetris
- enabled zcache (thanks faux)
- Xpad support
- some other thing not worth to be explained here
- FOR ANDROID 4.3 only atm !!!!!
REVOLUTION 1
- Rebased entirely on Demetris' Optimus Codes
- Less controls in trickstermod, just cpu Voltage
- gpu at 520 mhz
- no more overclock since it's not stable with this code
- all the features of optimus primes except cpuquiet selectable governor
- huge number of patches and bugfixes
- need your feedback for stability
PRE-REQUIREMENTS
UNLOCKED BOOTLOADER, ROOT AND RECOVERY!
HOW TO INSTALL
1 Download the KERNEL version which fits with your needs
2 Copy the zip to your sdcard
3 Boot into recovery
4 Flash the zip
5 Wipe cache/dalvik (not required everytime)
6 Reboot
Download Links:
REV 1 05/09/2013
Stock REVOLUTION 1 link: https://www.dropbox.com/s/cxw92g7w8rx7cu7/PH85_REV1_KERNEL_STOCK_P880.zip
CM10.2 REVOLUTION 1 link: https://www.dropbox.com/s/acmnidv4bl7s4az/PH85_REV1_KERNEL_CM10.2_P880.zip CM10.2 VERSION NEEDS TO BE FIXED
PH85 old project
Stock best version v1.52: https://www.dropbox.com/s/ia0ohxouure2q1z/PH85_KERNEL_P880_V1.52.zip
- Bluetooth not working fine in following versions but it has great performances
CM10.1 version v2.15 : https://www.dropbox.com/s/bypkitzbm2b507o/PH85_V2.15_KERNEL_CM10.1_P880.zip
CM10.2 version v2.15 : https://www.dropbox.com/s/8s8ezn4ffbhgg6e/PH85_V2.15_KERNEL_CM10.2_P880.zip
My github
Original PH85 project: https://github.com/Pesach85/ph85-p880-kernel-project
Revolution 1 project: https://github.com/Pesach85/lge-kernel-p880
THANKS
I want to thank all the XDA community and all people which trasmitted me the passion to compile by myself a kernel and add features
People which i met here in xda from long time like berni and iodak and new developers i met here in p880 section like demetris, laufersteppen wolf and many other i can't nominate here.
Some screenshots
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
First a question: is it for stock or CM?
Then, do I get you right that this is kernel is more-less cherry-picked?
But anyways, thanks for your work
Sent from my LG-P880 using xda premium
If cherry picked stay for "i use your sources because i'm not able to code by myself", yes it is
Anyway yes almost it is.
Follow my github to see what i change
Sent from my LG-P880 using xda app-developers app
Pesach85 said:
If cherry picked stay for "i use your sources because i'm not able to code by myself", yes it is.
Anyway yes almost it is.
Sent from my LG-P880 using xda app-developers app
Click to expand...
Click to collapse
Yeah, that's what it means
It comes mainly from git, where you've got the ability to "cherry-pick" single commits
BTW, your github it down
Sent from my LG-P880 using xda premium
I not use exactly cherry pic function i use the old fashioned way copy-paste because i feel more comfortable with
You should see the commit with github app anyway
Sent from my LG-P880 using xda app-developers app
Tested it, and it appears that mobile data aand wifi are not working. It also lags at times when I unlock the screen. Everything else is ok though.
All works for me, installed it over iodak v2. 5800 quadrant. I'm loving it
Flying_Bear said:
All works for me, installed it over iodak v2. 5800 quadrant. I'm loving it
Click to expand...
Click to collapse
Theorically raising the throttle temps this Tegra 3 platform can reach the One X (customized) level but this phone overheats too soon so i tried to setup the best i can without raising too much the temperatures limit.
The GPU clock doesn't give increase in perfomance, i tested it before editing the sources, even if you raise all GPU frequency at 600 i guess for the same thermal reason.
So for now i think i found the best overlock/battery drain compromise without compromise stability.
We all know this nvidia platform could indeed give much more performance with a better thermal cooling.
Pesach85 said:
Theorically raising the throttle temps this Tegra 3 platform can reach the One X (customized) level but this phone overheats too soon so i tried to setup the best i can without raising too much the temperatures limit.
The GPU clock doesn't give increase in perfomance, i tested it before editing the sources, even if you raise all GPU frequency at 600 i guess for the same thermal reason.
So for now i think i found the best overlock/battery drain compromise without compromise stability.
We all know this nvidia platform could indeed give much more performance with a better thermal cooling.
Click to expand...
Click to collapse
Gpu overclocking helps the odd game, MC4 for example
Sent from my rooted P880
Can u do cwm zip to install from phone cause i have no pc here
Sent from my LG-P880 using xda app-developers app
emre81tr said:
Can u do cwm zip to install from phone cause i have no pc here
Sent from my LG-P880 using xda app-developers app
Click to expand...
Click to collapse
Use tefminal emulator, you can flash it from there
Flying_Bear said:
Use tefminal emulator, you can flash it from there
Click to expand...
Click to collapse
How will i do ? Where do i put the image file
Any instaction
Sent from my LG-P880 using xda app-developers app
Flying_Bear said:
All works for me, installed it over iodak v2. 5800 quadrant. I'm loving it
Click to expand...
Click to collapse
how solve baseband xmm wakelock issue?
View attachment j794_root.rar
emre81tr said:
How will i do ? Where do i put the image file
Any instaction
Sent from my LG-P880 using xda app-developers app
Click to expand...
Click to collapse
1.download j794_root (if u dont have)
2.Extrat it
3. open the Extracted folder
4. j794_root/root/ copy the img file here.
5. go back and right click root folder by holding on SHIFT key.
6. Select "Open command windows here"
7. now you can type the commend in the instruction on command window i.e
Code:
adb push phv1boot.img /sdcard/
adb shell
su
cat /mnt/sdcard/phv1boot.img >/dev/block/mmcblk0p2
sync
reboot
Before doing this make sure the kernal iodakv2 is installed
Good luck:good:
I can in tegra overclock max set GPU freg 416MHz, CPU is ok 1,7GHz, how to set GPU higher frequency? I have before instaled iodak_v02 kernel, max GPU was 520MHz.
dann1989 said:
I can in tegra overclock max set GPU freg 416MHz, CPU is ok 1,7GHz, how to set GPU higher frequency? I have before instaled iodak_v02 kernel, max GPU was 520MHz.
Click to expand...
Click to collapse
Download trickster mod kernel settings, you can use this to raise the max gpu threshold
Sent from my rooted P880
plz cvm instaled
Whether there are improvements in battery?
Wifi not work for me and its not working on cyngmod
Sent from my LG-P880 using xda premium
emre81tr said:
Wifi not work for me and its not working on cyngmod
Sent from my LG-P880 using xda premium
Click to expand...
Click to collapse
This kernel is not made for Cmod
Sent from my rooted P880
[KERNEL][3.4.5][Sandy Kernel V 1.1] for Micromax A250
First Custom Kernel for Micromax Canvas Turbo
WARNING:
Code:
I or xda is not responsible for any kind of damage to your device. Please use it at your own risk!
FEATURES :
As of now basic features added. Will keep updating new version regularly.
Based on Blu life One x source
LZMA Compression for zImage and Gzip for ramdisk.
MTK Vermagic Hack
Optimized ARM algorithm ( Credits to @faux123 )
Governors added :
Smartass2
Nightmare
Pegasusq
Sakuractive
Intellidemand
Performance
Powersave
I/O schedulers added :
SIO
Fifo
Fiops
Row
Vr
Zen
Sioplus
Click to expand...
Click to collapse
Use Trickster mod App to change governors. For more detailed review on governors read post #3
Installation instructions :
Copy zip to your Sd card / Internal memory
Install zip
Reboot :laugh:
DOWNLOADS :
V 1.1 : http://d-h.st/M5y
OLDER VERSIONS
V 1.0 : http://d-h.st/Jzq
CREDITS :
@kashifmin for his support and guidance
@suhas.holla for his support
Couple of A250 guys for testing it
Screenshots :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Kernel sources :
https://github.com/sandymanu/CM11_a250_kernel
XDA:DevDB Information
[KERNEL][3.4.5][Sandy Kernel V 1.1] for Micromax A250, Kernel for the Micromax Canvas Turbo A250
Contributors
Santhosh M
Kernel Special Features:
Version Information
Status: Stable
Stable Release Date: 2014-06-27
Created 2014-06-27
Last Updated 2014-08-01
FAQ's on Kernel :
What is a kernel? Why should I install it?
A: Click here to know the answer.
Will this work on all MT6589 / 6589T Phones?
A: NO
Is this kernel compatible with all ROMs?
A: This kernel works for all stock based ROM's. Non stock ROM's replace ramdisk.
Will this work on other clones of these devices such as Blu life One X ?
A: YES. It will work
Is this kernel recommended for daily use?
A: Yes!
What are the best governor+io combinations?
A: Hotplug+cfq, Smartassv2+cfd, Sakuractive+cfq. You can give me feedback on the thread so that others can know.
Governors explained
Explanation on Governors :
Intellidemand:
Intellidemand aka Intelligent Ondemand from Faux is yet another governor that's based on ondemand. Unlike what some users believe, this governor is not the replacement for OC Daemon (Having different governors for sleep and awake). The original intellidemand behaves differently according to GPU usage. When GPU is really busy (gaming, maps, benchmarking, etc) intellidemand behaves like ondemand. When GPU is 'idling' (or moderately busy), intellidemand limits max frequency to a step depending on frequencies available in your device/kernel for saving battery. This is called browsing mode. We can see some 'traces' of interactive governor here. Frequency scale-up decision is made based on idling time of CPU. Lower idling time (<20%) causes CPU to scale-up from current frequency. Frequency scale-down happens at steps=5% of max frequency. (This parameter is tunable only in conservative, among the popular governors)
To sum up, this is an intelligent ondemand that enters browsing mode to limit max frequency when GPU is idling, and (exits browsing mode) behaves like ondemand when GPU is busy; to deliver performance for gaming and such. Intellidemand does not jump to highest frequency when screen is off.
Sakuractive:
This driver mimics the frequency scaling behavior in "on demand" but with several key differences. First is that frequency transitions use the CPUFreq table directly, instead of incrementing in a percentage of the maximum available frequency. Second "sakuractive" will offline auxillary CPUs when the system is idle, and online those CPUs once the system becomes busy again. This last feature is needed for architectures which transition to low power states when only the "master" CPU is online, or for thermally constrained devices
ZZmoove
ZZmove Governor optimized for low power consumption with the screen off, with particular attention to the limitation of consumption applications in the background with the screen off, such as listening to music. It has three settings: battery saver, balanced and performance. In addition to a performance boost, there is also the governor zzmove optimized.
Pegasusq/Pegasusd
The Pegasus-q / d is a multi-core based on the Ondemand governor and governor with integrated hot-plugging.
Ongoing processes in the queue, we know that multiple processes can run simultaneously on. These processes are active in an array, which is a field called "Run Queue" queue that is ongoing, with their priority values arranged (priority will be used by the task scheduler, which then decides which process to run next).
To ensure that each process has its fair share of resources, each running for a certain period and will eventually stop and then again placed in the queue until it is your turn again. If a program is terminated, so that others can run the program with the highest priority in the current queue is executed.
SmartassV2:
Version 2 of the original smartass governor from Erasmux. Another favorite for many a people. The governor aim for an "ideal frequency", and ramp up more aggressively towards this freq and less aggressive after. It uses different ideal frequencies for screen on and screen off, namely awake_ideal_freq and sleep_ideal_freq. This governor scales down CPU very fast (to hit sleep_ideal_freq soon) while screen is off and scales up rapidly to awake_ideal_freq (500 mhz for GS2 by default) when screen is on. There's no upper limit for frequency while screen is off (unlike Smartass). So the entire frequency range is available for the governor to use during screen-on and screen-off state. The motto of this governor is a balance between performance and battery.
Reserved
Great Work Bro ..... :good::good::laugh::laugh:
First ever custom kernel for A250 .... Development for A250 taken to a new level :good:
nrupesh2912 said:
Great Work Bro ..... :good::good::laugh::laugh:
First ever custom kernel for A250 .... Development for A250 taken to a new level :good:
Click to expand...
Click to collapse
Thanks bro
Sent from my Micromax using Tapatalk
Finally First Custom Kernel For our Canvas Turbo ...U made it happen .. @Santhosh M ..Just Awesome
suhas.holla said:
Finally First Custom Kernel For our Canvas Turbo ...U made it happen .. @Santhosh M ..Just Awesome
Click to expand...
Click to collapse
Thanks a lot bro Will keep it updating
Hi,
Sorry to ask a noob question. I am using stock rom v4, i have downloaded this kernal.and tried to install with CWM (stock cwm). But error "installation aborted". I have changed the zip name to update.zip, but same error. Am i doing anything wrong?
sai.suri1983 said:
Hi,
Sorry to ask a noob question. I am using stock rom v4, i have downloaded this kernal.and tried to install with CWM (stock cwm). But error "installation aborted". I have changed the zip name to update.zip, but same error. Am i doing anything wrong?
Click to expand...
Click to collapse
Dunno where you are making error ! Download it freshly and put it inside root of internal storage/ SD card. ( Don't touch/edit anything in zip ).
Just boot to CWM and install zip. All should be okay
I'm using stock recovery. I think i should use custom recovery. What do u say?
sai.suri1983 said:
I'm using stock recovery. I think i should use custom recovery. What do u say?
Click to expand...
Click to collapse
What...OMG !!! Stock recovery isn't cwm recovery. Its called 3e recovery. CWM is custom recovery. First install cwm.
Ok. Installed recovery- TWRP. And flashed kernal. Now testing. Will give u fead back.
Edit:
I'm using hotplug. Does it gives good battery backup.
Great job @Santhosh M, I'm using the kernel with Purexperia Z2 on my Wiko Darkfull and so far everything is operating ok. I'll test a few more days to give feedback.
best regards
EDIT: im testing it with smartass v2 + cfq
sai.suri1983 said:
Ok. Installed recovery- TWRP. And flashed kernal. Now testing. Will give u fead back.
Edit:
I'm using hotplug. Does it gives good battery backup.
Click to expand...
Click to collapse
Hotplug is the default even in ur stock kernel. Use any other by reading about governors
V 1.1
V1.1 released with newly added schedulers and optimized ARM algorithm
Antutu Benchmarks
Here is some results from Antutu Benchmark using Purexperia Z2 rom and Sandy Kernel v1.1 on Wiko Darkfull
Governor Hotplug
Click to expand...
Click to collapse
Governor Smartass v2
Click to expand...
Click to collapse
Governor Performance
Click to expand...
Click to collapse
Governor Lulzactiveq
Click to expand...
Click to collapse
I'm using lulzactiveq and my phone is flying. Later i will show the batery usage
FSadino said:
Here is some results from Antutu Benchmark using Purexperia Z2 rom and Sandy Kernel v1.1 on Wiko Darkfull
I'm using lulzactiveq and my phone is flying. Later i will show the batery usage
Click to expand...
Click to collapse
Thanks for the screenies & thanks for trying
Hi,
I am using stock rom v4 tweaked by mahendra. After flashing this kernal my mobile freezes some times. If i use hotplug governor, nothing will happen. If i change the governor after some time it will freeze. Then i have to force it to restart. Most of the times it freezed when i opened what's app. Sorry, i forgot which governor i have used.
Thanks.
sai.suri1983 said:
Hi,
I am using stock rom v4 tweaked by mahendra. After flashing this kernal my mobile freezes some times. If i use hotplug governor, nothing will happen. If i change the governor after some time it will freeze. Then i have to force it to restart. Most of the times it freezed when i opened what's app. Sorry, i forgot which governor i have used.
Thanks.
Click to expand...
Click to collapse
It's because of that ROM ( Tweaked Stock ROM). You should flash only on stock ROM