My touchpad just crashed while using the stock browser. I'm not overclocked, but I'm using the cm nightlies. The screen just turned black and rebooted. Is it most likely a software issue?
Same thing it happens to me a lot. Idk why, can someone shed light on this one. Thanks.
Sent from my cm_tenderloin using XDA Premium App HP TouchDroid
Boot in Clockwork
* Wipe cache partition
* Advanced -> wipe dalvik cache
* Fix permissions
Reboot
Sometimes, it needs to be done two times
Poussun said:
Boot in Clockwork
* Wipe cache partition
* Advanced -> wipe dalvik cache
* Fix permissions
Reboot
Sometimes, it needs to be done two times
Click to expand...
Click to collapse
Thanks added, Just followed your instructions and my TOUCHPAD its like a new machine no longer freezing/locking up .
Thanks again.
Related
This is mostly for anyone who runs kifno's rocksteady ROM, along with his scripts. Essentially, I am not sure how to install both of them together properly. It seems the instructions kind of overlap? And I do not want to wipe anything at the improper time. So if someone could edit these instructions so I could follow them in sequence, I would be grateful. If it makes a difference, I will be flashing the uncapped kernel (768mhz).
P.S. - I've been running xda roms for about a year now, and just wanted to say thank you for all your hard work and contributions to the open-source community. To ALL developers
ROM INSTRUCTIONS
Instructions:
1. Backup EVERYTHING (SD Card, Titanium Backup, Nandroid)
2. Wipe EVERYTHING (Data/Factory Rest, Wipe Cache, Format Boot, System, Cache, and Data, Wipe Dalvik)
3. Download and Copy RockSteady & Gapps to your sdcard
Get Rock Steady Here
Get Gapps Here
4. Flash RockSteady and Gapps and Reboot
5. Skips gapps setup and reboot into recovery and wipe data, cache, and dalvik again
6. reboot into system
7. After setting up gapps, in the menu > sense settings > ui setting > check tink ab and make the scale factor 1 instead of 7
8. Long press home screen and create a custom widget with phone as the activity. Then click the phone icon and us es file explorer or gallery and use the transparent.png I provided for you on the root of your SD card. Okay the custom widget and the drag and drop it over the phone button. Do the same for right sense dock button (choose a custom activity of your choice)
9. Add the sense clock by using the fancy widget widget i provided for you.
10. Choose a new wallpaper if you wish by picking one of the sense wallpapers I provided for you on your sdcard's root directory.
11. Please see here about widgetlocker. Please purchase this app from the market to use as the sense lockscreen. I REALLY RECOMMEND IT. And you can easily disable the default lockscreen once you start using this app by going into the cyanogenmod settings > tablet settings > and checking disable lockscreen.
SCRIPT INSTRUCTIONS
Installing Instructions (Recovery Menu):
Difficulty: Easy
Download the Kifno Tweak's Universal Script v1.5 from below:
Get the Capped 691mhz Build Here
Get the Uncapped 768mhz Build Here
Charge phone to 100% and leave on the charger during this process
Put the .zip on the root of your sd card
Reboot into recovery
Backup Everything (Apps, SD Card, etc) & Wipe Everything (Data, Sd-Ext, Cache, System, Boot, Dalvik-Cache)
Flash Rom
Fix permissions if using clockwork recovery
Flash your capped or uncapped build
Delete data, cache, and dalvik
Reboot
Reboot Recovery
Delete data, cache, and dalvik
Unplug Charger and do not plug back in until your phone dies.
Reboot into recovery once it is dead by connecting charger.
Wipe battery stats
Charge to 100% and repeat the discharging, wiping, and charging process about 3-5 times
Enjoy the battery life and performance
The red is the confusing part. Thanks!
Ill post instructions in about an hour or two. Glad to see you're using my work though and sorry for the confusion.
Sent from my HERO200 using XDA Premium App
The Muiu Camera Doesnt Work :[
backup everything
wipe everything
flash rom
flash gapps
flash v1.5 stable
reboot into rom
skip gapps and reboot recovery
wipe data,cache, and dalvik
reboot into rom
then follow my set up instructions for my rom after that process
enjoy
also miui camera works on 4-21-11 it does. are you using the latest version?
Yes I amm
Sent from my HERO200 using XDA App
Jurellz said:
Yes I amm
Sent from my HERO200 using XDA App
Click to expand...
Click to collapse
Oh sorry didn't see your reply but try the latest one now
hello i am getting force close error on some system apps like google maps...how can i fix thi?do u have to wipe dalvik cache?will wiping dalvik cache format my phone?
raghavaggsss said:
hello i am getting force close error on some system apps like google maps...how can i fix thi?do u have to wipe dalvik cache?will wiping dalvik cache format my phone?
Click to expand...
Click to collapse
which rom are u using?
stock rom
i m using the preloaded stock rom
raghavaggsss said:
i m using the preloaded stock rom
Click to expand...
Click to collapse
dalvik wont wipe your phone it wipes the main cache that apps run from.
if your rooted best option would be to clean dalvik from recovery and reboot. it will take alot longer to boot, once booted i would suggest using rom manager and fix permissions. then allow it to reboot, if not reboot it yourself and it should sort its self out
Hey guys,
I've had CM 7.2 Stable for a couple weeks on my phone. It was
working great until a few days ago when I tried to tweak the CPU
settings a little. Right now i'm using
Governor Smartass V2- Min 352 MHz, Max- 691 MHz
What CPU settings are you all using with CM 7.2???
Since I tweaked it from the default cpu settings I've been
experiencing screen freezes. Sometimes the trackball will work
sometimes it won't. It primarly happens when my phone has been
sitting idle for some time. I'll try to get it out of the lock screen
but it won't respond to my touch. I've tried rebooting, battery pull,
I've also tried lowering and raising the min and max settings. It'll
work periodically and then it will just freeze. Funny thing is I
don't know what the "default cpu settings" were set at. I've been
looking around a lot but couldn't find much.
Thanks!
I have never seen an issue here with 691. My experience though is that smartass 1 or 2 do not work as well as ondemand.
691/352 ondemand
Sent from my HERO200 using Tapatalk 2
kjjjjshab said:
I have never seen an issue here with 691. My experience though is that smartass 1 or 2 do not work as well as ondemand.
691/352 ondemand
Sent from my HERO200 using Tapatalk 2
Click to expand...
Click to collapse
Thanks a lot for the input. I'll try to go back to On Demand. If that doesn't work then maybe I'll just re-flash the ROM.
Tell me do you have any other overclocking apps installed?? Or any kind of app that effects the lock screen??
#Root-Hack_Mod*Always\=LTE
laie1472 said:
Tell me do you have any other overclocking apps installed?? Or any kind of app that effects the lock screen??
#Root-Hack_Mod*Always\=LTE
Click to expand...
Click to collapse
Hi-
I looked at my list of apps to be sure and no extra overclocking app installed. I'm using the default "CyanogenMod Settings" to get to "Performance" and setting the cpu from there. I have not installed any extra lock screen apps or 'lock screen security app' other than what comes preinstalled on CM 7.2. I don't believe I have any app that effects the lock screen. All of the apps I have are fairly simple, mostly developed by google inc. and nothing that tweaks or alters the device (I have Maps, a Speedometer, Navigation.) I try to keep them all closed though with the Task Killer app I downloaded.
I have switched back to OnDemand. So far nothing has changed and it's still stalling up (even though it's only been about an hour.)
Thanks a lot.
Uninstall the task killer. Reboot to recovery. Wipe cache, and davlik cache. See if that helps at all.
#Root-Hack_Mod*Always\=LTE
Update
laie1472 said:
Uninstall the task killer. Reboot to recovery. Wipe cache, and davlik cache. See if that helps at all.
#Root-Hack_Mod*Always\=LTE
Click to expand...
Click to collapse
So I tried raising the minimum CPU And my phone would not respond at all in the lock screen the next morning. So I had to do a manual recovery and wiped the davlik cache and cache like you suggested (thank you Laie1472). Rebooted. Was able to navigate through my phone for about one minute and it froze again.
So I did a full wipe in recovery ( thanks to senior member SleepyEDB)
I re flashed cm 7.2 and so far it's running 'better' it still freezes every now and then in the lock screen and other places when I wake it up, but not as often. We'll see how it works tomorrow. Ive been searching through a couple other forums and one guy with a similar problem took his phone apart and found it was a hardware problem. Maybe I should send it back (BestBuy refurbished).
SleepyEDB said-
Doing a full wipe in recovery
Do the following steps in Recovery to perform a full wipe:
Wipe Data/Factory Reset
Wipe Cache Partition
Mounts and Storage -> Format /system
Mounts and Storage -> Format /boot
Advanced -> Wipe Dalvik Cache
To do a 'dirty wipe', only wipe the Cache Partition and Dalvik Cache, steps 2 and 5.
That worked for ONE day
brentmxt said:
So I tried raising the minimum CPU And my phone would not respond at all in the lock screen the next morning. So I had to do a manual recovery and wiped the davlik cache and cache like you suggested (thank you Laie1472). Rebooted. Was able to navigate through my phone for about one minute and it froze again.
So I did a full wipe in recovery ( thanks to senior member SleepyEDB)
I re flashed cm 7.2 and so far it's running 'better' it still freezes every now and then in the lock screen and other places when I wake it up, but not as often. We'll see how it works tomorrow. Ive been searching through a couple other forums and one guy with a similar problem took his phone apart and found it was a hardware problem. Maybe I should send it back (BestBuy refurbished).
SleepyEDB said-
Doing a full wipe in recovery
Do the following steps in Recovery to perform a full wipe:
Wipe Data/Factory Reset
Wipe Cache Partition
Mounts and Storage -> Format /system
Mounts and Storage -> Format /boot
Advanced -> Wipe Dalvik Cache
To do a 'dirty wipe', only wipe the Cache Partition and Dalvik Cache, steps 2 and 5.
Click to expand...
Click to collapse
So that was short lived. Once I did the Full wipe around noon it worked almost perfectly until for about 12 hours. I think it froze right before I went to bed. I woke up and it was completely frozen at lock screen again. I did another full wipe and reinstalled cm 7.2 and it froze again. So I did a second full wipe and it is now working. I really hope it will accept my nandroid backup if it freezes again because it's A LOT quicker. Than doing a full wipe.
Hope this helps anybody who goes through the same thing.
I have a Rooted HTC Vivid running Android 4.0.3, HTC Sense 3.6, ROM 3.26.502.56, Software Holics-1.2, Kernel Version 3.0.38_Holics_0730:
I'm in a poor ATT cell area and have to put the phone in a specific spot on top of a shelf and talk via BT at my desk. When using the phone as a phone without BT, the other party hears garble. I can use a wired ear/mic but I am chained to the shelf. Last week the BT just would not turn on at all. I've researched, rebooted, even factory booted but the BT function tries to turn on and just goes back to the off position.
Any suggestions would be highly appreciated as I am without reasonable phone commo without a BT.
Have you tried wiping all of the partitions using recovery. Or use the Superwipe script found in the devolpment section after try flash the rom of your choice and it should work.
Sent from my HTC Velocity 4G using Tapatalk 4 beta
HTC Vivid Rooted - Bluetooth Quit Working
WildfireDEV said:
Have you tried wiping all of the partitions using recovery. Or use the Superwipe script found in the devolpment section after try flash the rom of your choice and it should work.
----------
Thank you. I have used recovery last time. Now when I try to go to SuperSU it shows:
1) "The SU binary needs to be updated. Continue?"
2) *Continue (entered)
3) "If you have a custom recovery like TWRP or CWM, that can be used to (try to) install the SU binary. This is recommended for HTC devices. How would you like to install the SU binary?
4) *TWRP/CWM
5) "SuperSU will attempt to reboot your device into TWRP or CWM. This does not work on all devices. IF this app just closes, please reboot into recovery manually."
6) *OK
7) "Shutting down"
8) Restarts into:
"- reboot system now
- Install zip from sdcard
- wipe data/factory reset
- wipe cache partition
- backup and restore
- mounts and storage
- advanced
- go back"
9) * wipe cache partition
10) "Are you sure? This can not be undone"
11) * wipe cache partition
12) * reboot system now
13) * Turn bluetooth on
14) + Doesn't turn on as before.
Any ideas would be greatly appreciated.
Click to expand...
Click to collapse
dbcdn said:
WildfireDEV said:
Have you tried wiping all of the partitions using recovery. Or use the Superwipe script found in the devolpment section after try flash the rom of your choice and it should work.
----------
Thank you. I have used recovery last time. Now when I try to go to SuperSU it shows:
1) "The SU binary needs to be updated. Continue?"
2) *Continue (entered)
3) "If you have a custom recovery like TWRP or CWM, that can be used to (try to) install the SU binary. This is recommended for HTC devices. How would you like to install the SU binary?
4) *TWRP/CWM
5) "SuperSU will attempt to reboot your device into TWRP or CWM. This does not work on all devices. IF this app just closes, please reboot into recovery manually."
6) *OK
7) "Shutting down"
8) Restarts into:
"- reboot system now
- Install zip from sdcard
- wipe data/factory reset
- wipe cache partition
- backup and restore
- mounts and storage
- advanced
- go back"
9) * wipe cache partition
10) "Are you sure? This can not be undone"
11) * wipe cache partition
12) * reboot system now
13) * Turn bluetooth on
14) + Doesn't turn on as before.
Any ideas would be greatly appreciated.
Click to expand...
Click to collapse
So do you mean that after updating the Su binary your Bluetooth stopped working.
Sent from my HTC Velocity 4G using Tapatalk 4 beta
Click to expand...
Click to collapse
WildfireDEV said:
dbcdn said:
So do you mean that after updating the Su binary your Bluetooth stopped working.
Sent from my HTC Velocity 4G using Tapatalk 4 beta
Click to expand...
Click to collapse
No, I reset because the Bluetooth stopped working. Thanks.
Click to expand...
Click to collapse
Yesterday my phone restarted automatically and I noticed all my messages has been deleted. After that, when I try to reboot, after boot animation it shows "Android is upgrading". This appears every time after reboot. Can anyone help me what's the problem? I didn't do anything lately.
fix permission n retrieve back ur dalvik cache from system, (ur dalvik cache maybe set to integrated with system, so change back to its place with tb n fix permission.clear unneeded dalvik cache also
Sent from my GT-I9000 using xda premium