These files and steps will get your Bionic on ICS with root. Follow directions carefully and enjoy.
To make it simple and help I have made a 1 file tar to download. Contents include FXZ to 902 then supplied 902_905 and .230 files with RSD and new Moto Drivers. Also includes Rooting script.
http://android.mattsimoni.com/Bionic.tar
Code:
// Use at your own risk, I'm not responsible for anything that happens to your phone. This is the method I choose to do this and it worked without fail.
// You have been warned, now have fun and jump on the band wagon!!
** 902_905.zip treat like a normal update.zip and flash through stock recovery
** 6.7.230 ICS Bionic.zip you will need to unzip before flashing
**Install Flashing Process**
First back up both SDCARDS and format each
then RSD back to .902
When it boots up for the first time, bypass activation and stuff by touching the 4 corners of the screen
Top Left - Top Right - Bottom Right - Bottom Left
Add 902_905 zip to SDCARD
Reboot into recovery flash ZIP
When it boots up for the first time, bypass activation and stuff by touching the 4 corners
Top Left - Top Right - Bottom Right - Bottom Left
Add 6.7.230 ICS Bionic.zip and crc file to SDCARD
Reboot into recovery flash ZIP
When its boots up it will be ICS, dont panic wait a few minutes and your set.
**Rooting Process**
Install New MOTO Drivers
Put phone into USB Debugging Mode
Confirm you put your phone into USB Debugging Mode
Click run.bat from the Root Folder.
You are now rooted.
Super..
You are amazing, ty...
Ok I have been trying to post this for a bit now, I am running rooted Bionic .2233 very smooth and easy process. However, when I installed Avast anti virus Avast came back and told me that a program called Verizon Remote Diagnostic too is using a high SMS priority and Avast will not work properly with it installed. Avast at this point offered to uninstall and, of course, this tool will not uninstall. I googled this tool and I saw a Verizon rep saying something like this is a tool for customer service and sits in the background and does not mine data. Anyone else hear of this tool? Is there a way to freeze or due bloat? I don't like the idea that Verizon did this, the rep also said this tool was for the LG Optimus?? Is this leak originally for the Optimus?
Sqwaller said:
Ok I have been trying to post this for a bit now, I am running rooted Bionic .2233 very smooth and easy process. However, when I installed Avast anti virus Avast came back and told me that a program called Verizon Remote Diagnostic too is using a high SMS priority and Avast will not work properly with it installed. Avast at this point offered to uninstall and, of course, this tool will not uninstall. I googled this tool and I saw a Verizon rep saying something like this is a tool for customer service and sits in the background and does not mine data. Anyone else hear of this tool? Is there a way to freeze or due bloat? I don't like the idea that Verizon did this, the rep also said this tool was for the LG Optimus?? Is this leak originally for the Optimus?
Click to expand...
Click to collapse
Try disabling it from applications menu
Sent from my GT-P7510 using Tapatalk 2
Well done Matt, ty
matt1313 said:
Try disabling it from applications menu
Sent from my GT-P7510 using Tapatalk 2
Click to expand...
Click to collapse
Can not disable so tried force stop and that did not work, I did not see this app in titanium backup will look again and see if I can freeze it.
Thanks though for the quick response.
Can someone rehost. Data quota is exceeded.
arizona55 said:
Can someone rehost. Data quota is exceeded.
Click to expand...
Click to collapse
Give me a few and Ill upload to a server
That was really easy - now one question: Is there are restore process torestore the internal and External SD cards that we backed-up?
OR should I just drag/drop what I need?
Thanks again -
Ok I have a silly question.
I followed the instructions and RSD back to 902. The problem is when I boot into recovery I get the Android guy with the !
I am able to take the 905 update and that worked just fine.
I was unable to apply 905 or ICS from this thread or any others.
I have tried to search various places but can't find the same problem.
help?
arizona55 said:
Can someone rehost. Data quota is exceeded.
Click to expand...
Click to collapse
New link added
Lemmy Caution said:
That was really easy - now one question: Is there are restore process torestore the internal and External SD cards that we backed-up?
OR should I just drag/drop what I need?
Thanks again -
Click to expand...
Click to collapse
Drag and drop
powrful1 said:
Ok I have a silly question.
I followed the instructions and RSD back to 902. The problem is when I boot into recovery I get the Android guy with the !
I am able to take the 905 update and that worked just fine.
I was unable to apply 905 or ICS from this thread or any others.
I have tried to search various places but can't find the same problem.
help?
Click to expand...
Click to collapse
Try it all over again, sound like something went wrong
powrful1 said:
Ok I have a silly question.
I followed the instructions and RSD back to 902. The problem is when I boot into recovery I get the Android guy with the !
I am able to take the 905 update and that worked just fine.
I was unable to apply 905 or ICS from this thread or any others.
I have tried to search various places but can't find the same problem.
help?
Click to expand...
Click to collapse
did you unroot before you did all of this? try that and see if it works.
AWSOME ...!!!
This worked GREAT ... I followed the instructions as listed and am now running ICS - BTW make sure that your battery has a good charge on it BEFORE attempting ANY flashing ...!
My battery went too low while flashing - I thought I bricked it (would not charge after) I had to borrow a battery from a buddy.
Rookie mistake I know ...
Thanks again I will update if I find any bugs.
Bricked?
I downloaded to my unrooted stock 905 bionic last night and ran the update. All went successful until I rebooted. I received a great error message..
Code:
Invalid CG OTV (CG: webtop): Invalid SP Data
Invalid CG HAB (CG: webtop, status: 0x004E)
Invalid CG OTV (CG: webtop)
I tried going back to 902 using the FXB and RSDLite, but it fails. It worked the first time and failed at 19/20.. now it fails at 1/20 (aka immediately). I tried using laptop, desktop, two USB cords, etc. Any ideas on how to unbrick? I'll update this thread if I figure out how to fix it.
powrful1 said:
Ok I have a silly question.
I followed the instructions and RSD back to 902. The problem is when I boot into recovery I get the Android guy with the !
I am able to take the 905 update and that worked just fine.
Click to expand...
Click to collapse
PremierGT said:
did you unroot before you did all of this? try that and see if it works.
Click to expand...
Click to collapse
same thing happened to me and my phone is unrooted. I even re-ran RSD. Please help.
crobs808 said:
(turn off phone, hold down both vol buttons + power, press vol down then up to go into recovery, press both vol buttons at android exclamation icon to see menu options)
Click to expand...
Click to collapse
<was not doing the highlighted part
Can't Download files..
this ICS leak unlock Global GSM, Right?
what is the reason for formatting the sd cards?
my phone hasn't been rooted and i'm on 905 already. i'm just in it for the ics, i haven't had a need for root, as of yet.
Just install the 233 leak works great and i didnt format the sd cards, so i dont see the need of that.
I was using the gsm hack but after the install i cant get signal and i cant change the network type in settings, ICS for the bionic will open the global feature? If not can i re apply the gsm patch? or maybe use radiocomm
Thanks
Okay quick question I downloaded the .tar file, this makes the second time. Seems the root file is empty. After both downloads it still seems to be this way. Can I just use voodoo or is there another way? Thanks
Thanks for posting this. Also, i don't remember if I was on .893 or what I was on for stock. What if I never went past .893? thanks.
Can you just use cheesecake.apk to get the 905 and leaked ICS updates? thanks.
Related
I'm not sure whats going on with my D3. However, I have RSD and I have .890 and .959 downloaded as well as Fastboot.
What I want to do is just wipe the phone completely and just flash it like its a brand new phone.
Anyone know how to do so? Please post a link or instructions, I would greatly appreciate it.
atquick said:
I'm not sure whats going on with my D3. However, I have RSD and I have .890 and .959 downloaded as well as Fastboot.
What I want to do is just wipe the phone completely and just flash it like its a brand new phone.
Anyone know how to do so? Please post a link or instructions, I would greatly appreciate it.
Click to expand...
Click to collapse
http://goo.gl/7NoAv
Androidsims said:
http://goo.gl/7NoAv
Click to expand...
Click to collapse
Tried that. It keeps failing saying something about size was not as expected or something like that.
Redownload?
Avelnan said:
Redownload?
Click to expand...
Click to collapse
I have. MD5 sums match up each time. Should I try removing the ext sd card?
I would redownload everything and try agian
littleneutrino said:
I would redownload everything and try agian
Click to expand...
Click to collapse
Alright, attempt will be made again. Should I redownload RSD again or just the sbf's?
atquick said:
Alright, attempt will be made again. Should I redownload RSD again or just the sbf's?
Click to expand...
Click to collapse
Downloading the sbf's again. Went over to check and see if the phone was still on, The charging led is on, however the screen is off..
Held power, nothing. Held M + Power. Still nothing... Any thoughts on whats going on now?
I didn't see if you have pulled the SD card but yeah it can't hurt.
Sent from my DROID3 using XDA App
http://forum.xda-developers.com/showthread.php?t=1278056
Follow the first portion of the instructions on how to flash back to original 5.6.890. Note the making of a folder and it's name for the 890 flash.
Ignore the part about flashing the new ROM. These are the best instructions I've found so far for flashing back to stock via RSD lite.
Good luck, keep us posted.
Download and follow exactly and you'll be good to go.
Hope that helps.
Sent from my DROID3 using xda premium
wattnxt said:
http://forum.xda-developers.com/showthread.php?t=1278056
Follow the first portion of the instructions on how to flash back to original 5.6.890. Note the making of a folder and it's name for the 890 flash.
Ignore the part about flashing the new ROM. These are the best instructions I've found so far for flashing back to stock via RSD lite.
Good luck, keep us posted.
Download and follow exactly and you'll be good to go.
Hope that helps.
Sent from my DROID3 using xda premium
Click to expand...
Click to collapse
It keeps failing.
Step 3 mbmloader.bin
Step 4 mbm.bin
Step 8 logo.bin
Step 9 'lbl'
I'm stuck.
Let me do some looking when I get home tonight. I remember there being a file for certain versions of XP that helped some people and they couldn't flash without it.
I never had it happen personally, but I know those that did were terribly frustrated.
I also hear the 959 version is easier to flash for some reason. Never flashed that version, so this is only hear-say. But I know it did flash easier according to posts.
I will try to dig up a link for you.
i am getting the same thing also getting the bad CG boot.. now this may be a fix but idk how this guy got it it.. i have been asking eveywhere maybe you guys could help me... here is the thread http://forum.xda-developers.com/showthread.php?t=1248721
I found this by Psouza. He is likely the foremost expert on making things easy as far as unbricking your D3. Rumor has it he has a set of unbrick tools floating around this forum somewhere, though I haven't found it yet. Try in the Development thread, for sure it has to be there somewhere.
Post number 84
psouza4 said:
For those of you having problems flashing this and/or are suspicious of flashing ebr, mbr, and parts of the bootloader, you can selectively just flash the rest of it.
See attachment.
Click to expand...
Click to collapse
http://forum.xda-developers.com/attachment.php?attachmentid=715510&d=1315657647
Hope this helps.
I also saw that flashing the pre-installs file alone first helped someone. That file borked on me once, but I was able to adb it over and then execute it via adb to get my phone unbricked.
Please let us know what works for you, as all of this is a work in progress right now.
Good luck!
i don't know to much about adb and are looking for help on pre-installed files. I don't understand what that means or how to go about it? i also cant get past the bootloader screen, "invalid CG version". i can not boot up at all.
How bricked are you? can you boot into CWM? Are you able to boot into tools, or how far can you get?
What version were you running? 5.959 (stock) or 6.890 OTA or Leaked OTA or Soak test (all the same as far as 6.890 goes).
i can get into boot tools and just tryed another flash got to step 6 till it failed instead of 3.. I'm running stock. Cannot get passed boot tools... scratch all that just tried to flash again just on the off chance it mnight work and i got it. Going to try and re-root and CWN recovery with sdteel froids rom... will keep you in the loop
Awesome!!
Here is the link about the adb commands for preinstall.sh
http://forum.xda-developers.com/showpost.php?p=17196391&postcount=88
It helped me when I borked my leaked update. I ran into the same problem as limaxray did with too many files in /system. So make sure you clean out any apps you made into system apps before trying the update via the standard update route, and that all stock system apps are in place and properly named.
I had to remove some that updated partially with the leaked update when mine borked. I used the posted system dump to push them to the phone and then the update ran properly and updated them anyhow.
If for some reason re-rooting doesn't work for you. Go to /system/bin and remove su, busybox. Do the same in /system/xbin. For some reason if you already have them in there when you run the process, it will say success but no root after reboot. My 2c as it happened to me. You do not need to remove superuser.apk, but you will have to update it in the market after you re-root.
Congrats!!
I see now too there is a fastboot and moto-fastboot. moto-fastboot has worked for some who had issues from what I've found.
Keep us posted, and smile knowing you've recovered from a bork; none of us got where we are without doing it at least once, so you're in good company.
re-rooted and installed bootstrap, just got steel droid all loaded up and all is good.... thanks for your speedy responses and detailed instructions and links. I realy think all that happened was i took everything aet it sone last time tried to flash and it went threw. All i used was RSD lite and flashed the 8.6.590 fast boot file and after a several retries it went threw. If anyone needs help on this i will post the file links if you need the ones i used
(Obvious Noob warning---) A friend helped me root my Thrill, install ClockworkMod Recovery, and then install CM7 on my Thrill. But I would like to try the LG GB release. Is it necessary to backtrack all the way back to stock to do this (i.e. reinstall the stock ROM, reinstall the stock recovery, unroot, etc.)?
My friend tried using the LG upgrade tool on his LG phone without going back to stock and ended up bricking it. He says that usually within a few days of release, a CMR compatible zip file (usually already rooted) appears here on XDA (I haven't seen it), which makes things easier (but obviously he didn't wait for it himself).
Will a zip be possible for the Thrill GB? (The file seems quite large (420MB), so I'm guessing there is a lot of media included.) Or should I just bite the bullet and backtrack?
Rick
Rick Tillery said:
(Obvious Noob warning---) A friend helped me root my Thrill, install ClockworkMod Recovery, and then install CM7 on my Thrill. But I would like to try the LG GB release. Is it necessary to backtrack all the way back to stock to do this (i.e. reinstall the stock ROM, reinstall the stock recovery, unroot, etc.)?
My friend tried using the LG upgrade tool on his LG phone without going back to stock and ended up bricking it. He says that usually within a few days of release, a CMR compatible zip file (usually already rooted) appears here on XDA (I haven't seen it), which makes things easier (but obviously he didn't wait for it himself).
Will a zip be possible for the Thrill GB? (The file seems quite large (420MB), so I'm guessing there is a lot of media included.) Or should I just bite the bullet and backtrack?
Rick
Click to expand...
Click to collapse
I'm assuming that the official update method was used.
Just use this method after downloading the update. No bricking.
SEE THREAD
The Dark Lestat said:
I'm assuming that the official update method was used.
Just use this method after downloading the update. No bricking.
SEE THREAD
Click to expand...
Click to collapse
Thank you for your help!
Rick
Trojan?
Sorry, but as a noob, I can't post in that other thread.
It seems that the shttp3.exe in the LG Flash Package triggers Symantec's trojan detection. Some searching seems to indicate (assuming I'm reading all the cryptic virus sites correctly) that there is something to this, although it seems that different scanners find different trojans/viruses (can't post the link, but Google for "shttp3.exe" and "trojan"). I also found that the web site for this utility is blocked at work, because it's a "malicious site."
Has anyone seen this? Has anyone been able to verify/refute this?
Rick
There is no virus, Lestat would never do that
Sent from my LG-P925 using XDA
Just my .02 .....Get rid of Symantec !! They are known for scaring people into a virus frenzy.. Yes, it is possible that it is seeing it as a potential virus because shttp is a workaround from the usual porting of windows ip services. ...
Correct me if i'm wrong somebody please !!
Get yourself Comodo and save your money...
Regards,
Dwayne
PS: somebody on here has written a script that just uses shttp temporarily while
your doing the flash procedure, and then reverts your host files back automatically after your done. You should try it.
dwaynedman said:
Just my .02 .....Get rid of Symantec !!
Click to expand...
Click to collapse
Symantec isn't really a choice on work PC.
Get yourself Comodo and save your money...
Click to expand...
Click to collapse
I'm sorry I can't give the link yet, but if you'll Google you'll see Comodo classifies shttp3.exe as "ApplicUnwnt.Win32.ServerWeb.SmallHTTP.~A" or "UnclassifiedMalware" (I guess depending on the version). A number of scanners find issues with shttp3.exe. I'm not saying it is infected, only that it is doing something suspicious.
Rick
Rick Tillery said:
Sorry, but as a noob, I can't post in that other thread.
It seems that the shttp3.exe in the LG Flash Package triggers Symantec's trojan detection. Some searching seems to indicate (assuming I'm reading all the cryptic virus sites correctly) that there is something to this, although it seems that different scanners find different trojans/viruses (can't post the link, but Google for "shttp3.exe" and "trojan"). I also found that the web site for this utility is blocked at work, because it's a "malicious site."
Has anyone seen this? Has anyone been able to verify/refute this?
Rick
Click to expand...
Click to collapse
shttp3.exe is in no way a virus. I've scanned with AVG and MalwareBytes Anti-Malware and they check out good.
Back to square one
OK, I seem to be stuck.
With paranoia in tow, I decided to take the long way back to stock. Unfortunately, when I tried to restore the backup of my stock image I made to SD card after installing CMR, the md5 checksum failed. I'm not sure what I can do about this.
So ok, I tried following the above link. The first step is to ensure the su binary is up-to-date. But when I tried this, I get a failure downloading the manifest. This is true for WiFi and HSPA+. I Googled and found a suggestion to delete the su binary. But that didn't help (I'm not sure how it would have helped anyway).
So back to the original question. Can I use the LG upgrade process to upgrade without going backwards (as you can see above, I can't) without bricking the phone? Can I start at step 3 in the link above and succeed?
Rick
The Dark Lestat said:
shttp3.exe is in no way a virus. I've scanned with AVG and MalwareBytes Anti-Malware and they check out good.
Click to expand...
Click to collapse
Thank you, sir. I hope it didn't seem accusing.
Rick
Rick Tillery said:
Thank you, sir. I hope it didn't seem accusing.
Rick
Click to expand...
Click to collapse
It's cool, my friend.
Sent from my Samsung Galaxy S II w/ CM9
Rick Tillery said:
OK, I seem to be stuck.
With paranoia in tow, I decided to take the long way back to stock. Unfortunately, when I tried to restore the backup of my stock image I made to SD card after installing CMR, the md5 checksum failed. I'm not sure what I can do about this.
So ok, I tried following the above link. The first step is to ensure the su binary is up-to-date. But when I tried this, I get a failure downloading the manifest. This is true for WiFi and HSPA+. I Googled and found a suggestion to delete the su binary. But that didn't help (I'm not sure how it would have helped anyway).
So back to the original question. Can I use the LG upgrade process to upgrade without going backwards (as you can see above, I can't) without bricking the phone? Can I start at step 3 in the link above and succeed?
Rick
Click to expand...
Click to collapse
Is it safe to ignore the su version update?
Short of this, can I override the MD5 checksum? I realize that image could be corrupt, but if I'm just going to replace it with the GB release, does that matter?
Rick
You should just put your phone in recovery mode and update through the tool
with your IMEI #. It will give you the latest update !
If you need some help on that I think Lestat or somebody has a write-up
on doing this.
Good luck,
Dwayne
dwaynedman said:
You should just put your phone in recovery mode and update through the tool
with your IMEI #. It will give you the latest update !
If you need some help on that I think Lestat or somebody has a write-up
on doing this.
Good luck,
Dwayne
Click to expand...
Click to collapse
Can you be a bit more specific?
1. By "recovery mode," do you mean into ClockworkMod Recovery, or I should revert to stock (I made a copy of it after I rooted the stock ROM, but before I installed CMR)?
2. By "the tool," do you mean the official LGMobile Software Update, or the LG Flash Package referenced in the link above?
3. By "latest update," do you mean the file directly from LG, or the copy (v20p) linked from the link above?
4. If the latter in both previous questions, which set of steps do I need to follow from the above link? Can I do only 3 (LG Flash Tool), or do I need to follow 1 (Recovery Manager), 2 (Returning to Stock), and 3?
My friend had a different LG phone, with ClockworkMod Recover and CM7 installed. He reverted the CM7 to stock, but did not replace CMR with the stock recovery. Then he used the official LG upgrade method and bricked his phone. I'm trying to avoid this.
Are you saying I don't have to worry about this on the LG Thrill 4G? Can I go straight from the current CMR+CM7 configuration to the LG GB release using the official LG process?
If you mean I should use a different process, can you point me to it? As I mentioned, I run into dead-ends using the method linked above. And I'm not even sure whether I should be doing steps 1, 2 and 3, or if I should just use step 3.
Any and all help is appreciated, but I guess I don't understand the shorthand you're using here, so if you could be a bit more specific, I wouldn't feel so lost.
Rick
Rick Tillery said:
Can you be a bit more specific?
1. By "recovery mode," do you mean into ClockworkMod Recovery, or I should revert to stock (I made a copy of it after I rooted the stock ROM, but before I installed CMR)?
2. By "the tool," do you mean the official LGMobile Software Update, or the LG Flash Package referenced in the link above?
3. By "latest update," do you mean the file directly from LG, or the copy (v20p) linked from the link above?
4. If the latter in both previous questions, which set of steps do I need to follow from the above link? Can I do only 3 (LG Flash Tool), or do I need to follow 1 (Recovery Manager), 2 (Returning to Stock), and 3?
My friend had a different LG phone, with ClockworkMod Recover and CM7 installed. He reverted the CM7 to stock, but did not replace CMR with the stock recovery. Then he used the official LG upgrade method and bricked his phone. I'm trying to avoid this.
Are you saying I don't have to worry about this on the LG Thrill 4G? Can I go straight from the current CMR+CM7 configuration to the LG GB release using the official LG process?
If you mean I should use a different process, can you point me to it? As I mentioned, I run into dead-ends using the method linked above. And I'm not even sure whether I should be doing steps 1, 2 and 3, or if I should just use step 3.
Any and all help is appreciated, but I guess I don't understand the shorthand you're using here, so if you could be a bit more specific, I wouldn't feel so lost.
Rick
Click to expand...
Click to collapse
Remove your battery and keep the phone unplugged
Launch the mobile updater tool
Hold the volume+ button plug the phone in and keep holding the volume+ till the computer downloads the drivers your phone is now in download mode
Once the phone is picked up go to customer support on the LG updater tool and click on recovery phone put your imie number in click check (make sure its the right model) an let the updater tool do its job. Once its done flashing launch into recovery volume- plus power plus 3D button do a complete wipe and factory reset and reboot your phone ... you'll lose cwm and root and be back to full stock
Sent from my LG-P925 using XDA
Bricked?
No joy. Following the steps, the upgrade stopped at 6%. Trying a number of times, it eventually forced me to exit the program (no more restarts). Rerunning the updater (and downloading the 420 MB image yet again on a VERY slow connection) I tried again and again, with different combinations of battery and plug order with power and volume buttons, but nothing worked. Checking elsewhere I found some issues had been reported with Windows Vista/7, so I tried on an XP machine. Now the "Start Updating" bar is red (it was always gray with W7). But now when I try to restore (or even update for that matter), it asks for my S/N (it never did that before) and then says it is "no longer able to upgrade." Reading around, it seems this is an indication of the device being bricked.
Rick
It sounds like you are very close to getting it working Rick.
My update did the same thing, looped over and over until it
finally kicked me out. Just plugging and unplugging the phone etc....
And when my update stuck at 6% the last time, i took my battery out and then in real quick and that seemed to work.
Does the phone still vibrate when you plug the usb cable into it while holding volume..? If it does then I highly doubt that your phone is bricked, just in a semi flashed state....No worries
Should Rick be trying to run LG Updater as administrator ? I didn't, but it might not hurt.
Regards & Luck,
Dwayne
http://forum.xda-developers.com/showthread.php?p=22417769
Have you tried this yet cause if you can get the LG logo to come up then you can reflash the phone and get it working send a pm to the dark lestat he may be able to team viewer you and help you out
Sent from my ****ty supported LG Thrill
dwaynedman said:
It sounds like you are very close to getting it working Rick.
Click to expand...
Click to collapse
I wouldn't have believed you early this morning, but now maybe...
My update did the same thing, looped over and over until it
finally kicked me out. Just plugging and unplugging the phone etc....
And when my update stuck at 6% the last time, i took my battery out and then in real quick and that seemed to work.
Click to expand...
Click to collapse
I tried a bunch of different combinations...none seemed to make the app happy. I finally punted Windows 7 and moved to an XP machine, only to get the "no longer able to update" message. At that point I assumed I was screwed (effectively bricked).
Does the phone still vibrate when you plug the usb cable into it while holding volume..? If it does then I highly doubt that your phone is bricked, just in a semi flashed state....No worries
Click to expand...
Click to collapse
It never really vibrated, but I was able to get back into CMR. Unfortunately NONE of my backups work at all. They all have MD5 checksum failures. I tried a trick I found online and got past that step, only to have it say a failure restoring /system. So much for CMR.
JReeher said:
http://forum.xda-developers.com/showthread.php?p=22417769
Have you tried this yet cause if you can get the LG logo to come up then you can reflash the phone and get it working send a pm to the dark lestat he may be able to team viewer you and help you out
Click to expand...
Click to collapse
Which step? As I mentioned above, I can't even get the first step of the first section (updating the su binary). And if I start at the 3rd section, Symantec prohibits me from using shttp3.exe (I tried to unquarantine it, but it gives a permission error, even as Administrator, when I try to run it), so I'll have to use a different machine.
I was able to reinstall the CM7 3/15 release, so that's something. I was going to restore the stock recovery backup I made, but even that doesn't seem to work. I'm having issue with backups :-(
Rick
i have never been able to restore a backup. i dont know why... but i have tried several times in several different instances.
---------- Post added at 11:56 AM ---------- Previous post was at 11:50 AM ----------
rick tillery, if you want to get your phone back to alive and well i'd suggest doing this:
http://forum.xda-developers.com/showthread.php?t=1558723&page=3
4th post i think
Backdrop:
1) Phone from a friend took over his contract.
2) Attempted to reset to default
3) Phone will only boot to CWM 4.0.0.2
Tried:
1) All parts of http://forum.xda-developers.com/showthread.php?p=19154278
The 'tot' files would not install, got 'block count' errors
2) Found mtmichaelson's RevoZV7GBStock.zip... It had a successful install (yay) but it still boots to CWM (boo)
3) Grabbed mtmichaelson's GingerVolt 2.0, downloaded it, it successfully installed (yay) but booted to CWM (boo)
4) Also have used LGPNST with no success
Conclusion: HELP!!
I can install certain ROMs but it is as if the bootloader does not doesn't load. Maybe something needs to be set, like Windows needs that "Primary Disk - Boot" information...
I have 7 days, and then I'm paying my termination fee before the next bill date.
I will appreciate any help or suggestions.
Thanks everyone!
Does lgnpst detect your phone? Have you tried to flash the tot from emergency form load mode?
Sent from my VS910 4G using XDA
I.M.famous XMAN said:
Does lgnpst detect your phone? Have you tried to flash the tot from emergency form load mode?
Sent from my VS910 4G using XDA
Click to expand...
Click to collapse
He said the tots would not install that he got block count errors so his phone would of had to of been detected to get any errors. And did this phone boot at all when you first got it or did it only boot into CWM?
Emergency Form Load?
I.M.famous XMAN said:
Does lgnpst detect your phone? Have you tried to flash the tot from emergency form load mode?
Sent from my VS910 4G using XDA
Click to expand...
Click to collapse
Yes, it does recognize my phone, but it can't load the 'tot' file, I get a process error about 'blocks not counted'
I don't know anything about 'emergency form load mode'. Please enlighten me.
Thank you!
Booting
Gel Pen6 said:
He said the tots would not install that he got block count errors so his phone would of had to of been detected to get any errors. And did this phone boot at all when you first got it or did it only boot into CWM?
Click to expand...
Click to collapse
Yes the phone booted, however when I removed his account after adding mine, the phone warned me it was going back to default settings.
Phone Booting
Gel Pen6 said:
He said the tots would not install that he got block count errors so his phone would of had to of been detected to get any errors. And did this phone boot at all when you first got it or did it only boot into CWM?
Click to expand...
Click to collapse
Yes the phone booted into Gingerbread and could make and receive phone calls, however when I removed the original owner's account after adding mine, the phone warned me it was going back to default settings and it wound up in this state
Sounds like you need this:
http://forum.xda-developers.com/showthread.php?t=1161537
Thank You!!!
nasaiya said:
Sounds like you need this:
http://forum.xda-developers.com/showthread.php?t=1161537
Click to expand...
Click to collapse
YES!!! The missing link!!!
Thank you and everyone else who contributed!!!!
Glad I could help
First-time poster here. I can't seem to find the RevoZV7GBStock.zip file. I've found links to it (from mtmichaelson's thread), but it looks like his Mediafire account is suspended. Does anyone else know where I could get this file?
EDIT: Nevermind...I went this route instead - http://forum.xda-developers.com/showthread.php?t=1337386
Thanks!
Okay, so now we have 3 Atrix HD's in the house and except for the unremoveable battery thing, and the short "battery life" when actively using it, I'd say we pretty much love them. However, I decided to remove some apps, etc. and managed to get my messages, camera and gallery to the "not working" and basically non-existent point. Now on startup I'm getting the Android is Updating message with the never-ending swirl of Starting Apps... I'm positive I've waited long enough as I set it down and went back to bed just to wake up and still see it.
Info - phone IS rooted
running the "jellybean" update
Unfortuanately a couple weeks ago, I UNCHECKED the sync photots for both facebook and gmail, so there are pictures I really don't want to lose.....
I'm definitely not a "pro" like lots of them up here, but am capable of following directions. I'm pretty sure I have to "unroot" my phone via USB/SD card through my laptop....Any help would be greatly appreciated... and the more specific the directions the better!! :cyclops: LOL... Thanks so much.
/COLOR]
Sounds like you deleted a critical OS file. You need to flash back to stock again. Is your boot loader locked or unlocked?
Don't remeber...
ai6908 said:
Sounds like you deleted a critical OS file. You need to flash back to stock again. Is your boot loader locked or unlocked?
Click to expand...
Click to collapse
I Don't rememer if I unlocked the bootloader. Is there a way to check? Thanks.
Follow what's in the website to reload your stock image...
http://www.andromods.com/tips-trick...-qinara-stock-original-firmware-fastboot.html
ai6908 said:
Follow what's in the website to reload your stock image...
http://www.andromods.com/tips-trick...-qinara-stock-original-firmware-fastboot.html
Click to expand...
Click to collapse
I've been trying and I've fallowed everything to the T but everytime it says it falls.
I'm not sure...I have used it before and was able to restore...are you sure it's not a hardware issue?
Sent from my HTC_Flyer_P512_NA using xda app-developers app
Okay, here's where we're at.... it is no longer frozen on that screen and goes thru the setup w/ my gmail, etc.... but then I have a black screen (except for the top row icons...). I can pull down the settings menu and see everything there, but I have no "homescreen"....It's black. It seems like we're in the right direction and I know it's not dead. Anything??
Also wanted to thank you for the help. This place is ALWAYS amazing....
Hey, my son and I are wondering since it's already running 4.1.1 and we can't downgrade, what about flashing a custom rom? Will that flash a totally complete, full home page and everything?? Just a thought.
While trying to search for answers I came across a "xoom forums??" post with a tablet that was doing exactly the same thing....multiple people had that problem, but doesn't seem to have been answered...... not sure if I'm suppose to post links to that or not, but at least I know I'm not alone.....
If you're rooted, than I'm assuming ADB debugging is on. You should be able to unlock your boot loader and load CWM recovery. From there you can wipe cache and dalvik cache. If that doesn't help, you can reflash a stock ROM zip from Skeevys thread. Flashing a zip won't touch your SD card
There is official 4.1.1 available...you can try flashing that...you dont need to downgrade.
Okay, my son installed safetystrap (whatever that is...lol) and when you click Operating system, it says "there is no operating system installed are you sure you want to reboot????
Is this fixable?
Note: We have two other identical Atrix HD's in the house if that helps for any reason.....
Well that's what we are trying to figure out is how to install OS...Lol..
Try install system using fastboot... Look for skeevedudes guide...its in this forum somewhere...
Sent from my MB886 using xda premium
LOL....okay, so do yoiu see why my son says I'm not "ALLOWED" to have a rooted phone if this happens again..... Guess I was just glad to SEE it written out, so that it's a little more def what's going on - but I'm sure everyone up here (except me) already knew that!!!
He's not around today, so my phone is just "sitting" saying "creating rom slot" but never gets off that screen. The good thing is that we can see it's actually charging and we weren't sure before....... Does this sound like something that will eventually be repairable??
You have a soft brick...yes it is fixable...
Okay, thought I had already posted this before but I guess I never hit the submit ....
Before safety strap was installed, we could get the phone (minus the homescreen and os) to come on....the settings, wifi etc.....No we can't seem to get to that point with the safetystrap on. It just goes completely blank and won't let safestrap connect to the computer via usb.
Apparently there is also no way to remove SS without an opperating system. This doesn't sound promising.....ugggg..... I so want my phone back.
Any help would be greatly appreciated.
OK dude. Follow my instructions.
Hold down power and both volume buttons all at once until the phone screen turns black, then continue holding the volume buttons. You will get a menu. Go to AP fastboot mode using the volume down button, select it with the volume up button. Plug your phone into your computer with a data cable. Download RSD lite and the MOTOROLA drivers from the MOTOROLA website. Install both. Download the 4.1.1 sbf file for your phone, there is a thread for it here in the AHD forum. Its a zip file, extract it to your desktop. Open RSD lite, click the browse for file button, select the XML file inside the folder you just unzipped. Hit flash. If you get any errors, let me know I'll send you a different XML file with the getvar lines removed.
Okay, will get it started..... Thanks so much. My son has been working on this for hours and hours. You have no idea how much I appreciate this place and everyone who helps out!! You guys rock! Will let you know what we get.
Here is the website for what youngunn mentioned...
http://www.andromods.com/tips-trick...-qinara-stock-original-firmware-fastboot.html
[FONT="Comic [SIZE="3"]Okay, my son (BlackestPain) is too new here to post the picture links, so I copied and pasted. They're just downloads from his camera pictures. This is where we are right now after following suggestions....[/SIZE]MS"][/FONT]
Okay, here is what I've (chixwithkidz5' son) tried.... Please cut me some slack because I haven't been doing this stuff long....
Getvar file
Getvar removed
RSD Lite connected
RSD Lite failed
\
***** this is what the phone reads after everything
What am I missing ? Thanks - I can use all the decent help I can get.
Bought my bionic a while back and rooted it and used safestrap to use a JB rom.
Now that JB is out for the bionic ive been trying everything i can think of to update it. I've tried unrooting, uninstalling safestrap via the app itself and multiple factory resets. I try to update and it will get to about 25% after rebooting then of course the lil droid will die and i get a software update failed message.
Is there something i missed?
Gabraham said:
Bought my bionic a while back and rooted it and used safestrap to use a JB rom.
Now that JB is out for the bionic ive been trying everything i can think of to update it. I've tried unrooting, uninstalling safestrap via the app itself and multiple factory resets. I try to update and it will get to about 25% after rebooting then of course the lil droid will die and i get a software update failed message.
Is there something i missed?
Click to expand...
Click to collapse
Follow this thread: "http://forum.xda-developers.com/showthread.php?t=2242075"
"mc_akiong" has the solution in the third post. Go and thank him for it.
pmrmx774 said:
Follow this thread: "http://forum.xda-developers.com/showthread.php?t=2242075"
"mc_akiong" has the solution in the third post. Go and thank him for it.
Click to expand...
Click to collapse
i cant seem to locate the file he is referring to. What general area of the phones files should it be in?
Gabraham said:
i cant seem to locate the file he is referring to. What general area of the phones files should it be in?
Click to expand...
Click to collapse
You need the FXZ file from Verizon. You unzip it and open the file suggested. edit out the two entries in notepad and save. Then, run RSD to apply to your phone. this hould be a US based phone.
You can get the file cdma_targa_9.8.2O-72_VZW-22_cfc.xml.zip at "http://forum.xda-developers.com/showthread.php?t=2240725"
Been having trouble getting rsd lite to recognize my phone . could these issues be related ?
Sent from my ME172V using xda app-developers app
downloaded the cdma, properly booted my phone into fastboot with RSD lite, flashed the modified cdma zip ( sans step operation lines) worked like a charm, if not a bit overly complex. thanks much