Database Develop

[Q]

I want to root my SGN but i am confused which metod i should to use?
TNx?
1.2. If you are not rooted yet: Using the zergRush exploit
(while it still works on our firmwares, this exploit will probably be fixed soon! Known to work on KJ1 and KJ4 firmwares)
- Download the attached "InitialRootFlasher.zip" and extract it somewhere
- Download one of the CF-Root kernels, and extract it (repeat) until you end up with a zImage file
- Place the zImage file from the CF-Root kernel in the zImage folder from InitialRootFlasher
- Start "not-rooted-yet.bat" and follow the instructions
1.3. If you are not rooted yet: Flash a modified FACTORYFS
I am providing this method just this once, for the KJ1 firmware. This is the /system part of the KJ1 firmware, modified so at first boot it will flash the KJ1 CF-Root and reboot, without getting you the yellow triangle or increasing the flash counter.
Using a newer firmware? Do this operation first, then flash the newer firmware back using CWM Manager. This is explained in Chapter 3 below.
Download: http://www.multiupload.com/YB9EL8D8O3
- Optional: flash the full KJ1 firmware first
- Unzip the file, you should get "SGN_XX_OXA_KJ1_FACTORYFS.tar"
- Make sure your SGN is NOT connected to your computer
- Reboot your SGN into "download mode" (see below)
- Start ODIN
- Click the PDA button, and select the "SGN_XX_OXA_KJ1_FACTORYFS.tar" file
- Connect the SGN to your computer
- Make sure "repartition" is NOT checked
- Click the START button
- Wait for the phone to reboot TWICE
- Done
If you do not know how to get into download mode:
- Turn off the device
- Count to 10
- Hold the "home" (the big physical button in the middle) and "volume down" buttons
- Press and release the power button (keep holding "home" and "volume down" !) to turn the device on
- You should get a download mode screen
- If it tells you to press a button to continue, do so
--- Chapter 2: Getting rid of ODIN ---
This is easy. Find ODIN, and delete it. In the future you should only need it to flash bootloaders, which probably will only really be needed one time: when upgrading from Gingerbread to Ice Cream Sandwich.
--- Chapter 3: Upgrading your firmware ---
My CWM Manager application has a full-fledged firmware flasher built in. Using the flasher from CWM Manager does NOT give you the yellow triangle or increase the flash counter.
3.1. Flashing a new kernel
This is easy. CWM Manager can flash zImage files (on any rooted kernel), zImage files inside a .tar file (only on a CF-Root kernel), and zImage files inside a .tar.zip (only on a CF-Root kernel). Note that zImage must be the ONLY file in an archive, if is is inside a tar or zipped tar.
- Put the zImage (or tar, or zip) file on your SD card
- Open the CWM Manager app
- Select "Flash kernel"
- Select the file you just put on your device
- CWM Manager will flash the kernel and reboot
If you flash a non-CF-Root kernel, you will lose a lot of functionality from CWM Manager. However, the app will (likely) still allow you to flash kernels.
3.2. Flashing a new firmware
Important: This works ONLY on a CF-Root kernel !
CWM Manager has the ability to flash firmware parts either from separate files (zImage, factoryfs.img, etc) or from .tar / .tar.md5 files that they usually come packaged in.
- Download the firmware you want to flash
- If you have a ZIP or RAR file, extract it until you have seperate files, or .tar / .tar.md5 files
- Create a folder named 'firmware' on your external SD card
- Copy the files you want to flash to this folder ( /sdcard/external_sd/firmware ). factoryfs ("system") is mandatory part at the moment.
- TIP: If you are flashing a new firmware that already has a CF-Root kernel available, put it in the 'firmware' folder as well in zImage or .tar form (NOT .zip). Select it when asked which kernel to use, then use the "Flash normally" option later on.
- Open the CWM Manager app
- Select "Flash stock firmware"
- At this point, CWM Manager will tell you about the firmware parts it has found, and which ones it will flash. It will also give you warnings about bootloaders and PIT files if those were found. If some firmware parts are present multiple times, it will ask you which file to use as source.
- If what you are flashing includes both kernel and system parts, CWM Manager will warn you about this as you are about to lose root. It will provide you with three options:
1: Keep CF-Root kernel
Keeps the current CF-Root kernel, only flash the other parts. You will not lose root or CWM Recovery. You can flash a newer CF-Root kernel later (or maybe you have already done so), see 3.1 above.
2: Pre-root system
Flashes both kernel and system parts, but roots system during the flash. You will lose CWM Recovery, but you will keep root (if all goes well). The CWM Manager application will also remain, and allow you to flash the correct CF-Root kernel at a different time (if you have not done so before), see 3.1 above.
3: Flash normally
Doesn't do anything specific. If the kernel you are flashing is not a CF-Root (or similar) kernel, you will lose root, and CWM Recovery.
- CWM Manager will reboot into CWM Recovery, and will flash the firmware, rebooting afterwards.

Go here and just read after 16Nov edit
http://forum.xda-developers.com/showthread.php?t=1329360

2.3.6 to 4.1 , help

Hi,
Ive just bought a used Galaxy Note running Stock 2.3.6 (N7000XXLC1 Kernel an N7000XXLB2 baseband) and want to put the latest jellybean rom on.
Ive read through lots of threads about the brick warning and so on, i just want to know how to go from 2.3.6 and have it rooted and cwm on and the latest 4.1 leak or a modified 4.1
Could somebody please tell me the steps to do it as dont want to brick it and this 2.3.6 is rubbish
Matt

Hello!
I've rooted my Note like this:
#1
Get the original software (like N7000XXLRU - the file is 914Mb and it is a *.md5 file. ) and odin (Odin3 v1.87), install it in odin...how?
Open odin and put the file in PDA.
Option in odin leave alone (Auto Reboot & F. Reset Time; are selected)
Put Note in download mode: Volume Down Key + Home Key + Power Key; then Volume up key to continue
Connect the phone to computer
Odin recognize the phone and you will see it on COM port
Click Start
After several minutes the phone will turn on.
Now you have a original sw on your phone, and believe me this sw is GREAT...but if you want more...
#2
Root you phone
Described in this link (http://forum.xda-developers.com/showthread.php?t=1329360)
I used ''1A.Root + safe kernel + advance recovery''
Just read carefully (will write it down)
Visit this thread
http://forum.xda-developers.com/showthread.php?t=1901191
And download kernel in zip format according ROM you are having on device (just look for XXLRU-VDI; PhilZ-cwm6 v3.5 with CWM 6.0.1.8)
Copy downloaded file to Ext SD card to root directory (or any folder you make; I have ''A_ROOT'' for this things)
Reboot into recovery (Volume Up Key + Home Button + Power Key)
Select install(update) zip from ext SD card (Install zip >> Choose zip from sdcard; and click on the *.zip file)
select '[your downloaded kerenel].zip' which you have copied to Ext card above
Reboot device
Now you will have Root + safe kernel
And your phone is rooted now. You can have all the programs that work only when your phone is rooted (Titanium Backup, Root Uninstaller, Root Browser Lite, ...)
#3
Your phone is now ready to install all Android Development ROMs
Read each post ''How to flash'' it is easy
For instance I like stock rom and love 4.1.2, so i have sw from http://forum.xda-developers.com/showthread.php?t=1970626
Example:
Save *.zip on your SD/EXT Card (Ultimate N7000 XXLSA JellyBean 4.1.2 v5)
Restart in CWMR (Volume Up Key + Home Button + Power Key)
Be sure you're on SAFE KERNEL, then you can wipe (jes you are - on PhilZ-cwm6)
Full wipe /data/factory reset /cache and dalvik (dalvik is in advanced option)
Flash the ROM (Install zip >> Choose zip from sdcard; and click on the *.zip file)
Wait some minute until your phone boot!
You are done. That's all.
I've never had any problems with any of the ROMs. You can do the #3 1000 times and nothing will go wrong. Just remember to do a back up in CWM, when you have a rom that works great for you and you like. So if anything happens and you phone is stuck in ''samsung'' sing, you can go in CMW and restore it.
I hope it helps and I didn't forget anything.

Thanks so much for posting. I followed all the instructions and it worked fine. I have however gone and installed a 4.0.4 rom after using 4.1 for a bit and finding it too juddery.
Thanks again
Matt

No problem.
You can wait for the official firmware release and then everything will work 100%.

Since he didnt i hit thanks
Sent from my Amazon Kindle Fire using Tapatalk 2

Have hit thanks now , forgot!

[NEW][GUIDE][ICS/JB] How to Root/Unroot Your I9100G Via Stock Recovery

Hi guys! I believe most of you obtained root via this method by Jiangyi: [TUTORIAL] Root access for ICS on I9100G which requires a temporary CWM. Quite a few users face problems because in temporary CWM, internal storage is swapped with external storage, i.e. sdcard=internal storage, internal sdcard=external storage. It may be confusing for newbies, especially on their first attempt on rooting. Therefore, I decided to release an easier method, where you can flash the zip files directly via stock 3e recovery!
Requirements:
- Running a stock ICS/JB ROM
- External sdcard
Features:
- SuperSU v0.99 by Chainfire
- Busybox v1.20.2 by Stericson
- No yellow traingle
- No increase in binary counter
Instructions (Root):
1. Download SU-BB-Installer.zip from here: http://www.androidfilehost.com/?fid=9390233485161005747
2. Place it in your external sdcard.
3. Power off your device COMPLETELY.
4. Boot into recovery mode by pressing Volume up + Home + Power buttons simultaneously.
5. Navigate to "apply update from external storage" using the volume buttons.
6. Select it by pressing the Power button.
7. Select SU-BB-Installer.zip.
8. Wait for it to finish and navigate up (select "../").
9. Select "reboot system now".
10. Congratulations, you now have root and busybox!
Optional: (For ICS only)
To obtain CWM recovery in order to start flashing ROMs or mods, read on:
1. Download kTool from Play Store: https://play.google.com/store/apps/details?id=net.hellcat.droiddev.ktool
2. For ICS: Download the CWM recovery kernel by codeworkx from here: [KERNEL][GT-I9100G] ClockworkMod Recovery 6.0.1.2
3. Extract the .tar file and you will get a file named zImage.
4. Place the zImage in the root of your internal storage.
5. Launch kTool and select "Flash kernel from /sdcard/zImage".
6. Reboot and profit! If you boot into recovery by Volume Up + Home + Power buttons, you will now see CWM recovery.
Optional: (For JB only)
To obtain CWM recovery in order to start flashing ROMs or mods, read on:
1. Download one of the stock recovery flashable zips of Blazing Safe Kernel from here: http://forum.xda-developers.com/showthread.php?t=2293576
2. Place it in your external sdcard.
3. Power off your device COMPLETELY.
4. Boot into recovery mode by pressing Volume up + Home + Power buttons simultaneously.
5. Navigate to "apply update from external storage" using the volume buttons.
6. Select it by pressing the Power button.
7. Select the zip.
8. Wait for it to finish and navigate up (select "../").
9. Select "reboot system now".
6. Reboot and profit! If you boot into recovery by Volume Up + Home + Power buttons, you will now see CWM recovery.
Instructions (Unroot):
1. Download SU-BB-Unstaller.zip from here: http://www.androidfilehost.com/?fid=9390233485161005748
2. Place it in your external sdcard.
3. Power off your device COMPLETELY.
4. Boot into recovery mode by pressing Volume up + Home + Power buttons simultaneously.
5. Navigate to "apply update from external storage" using the volume buttons.
6. Select it by pressing the Power button.
7. Select SU-BB-Unstaller.zip.
8. Wait for it to finish and navigate up (select "../").
9. Select "reboot system now".
10. You are now unrooted.
**NOTE: In order to use this method to unroot, you MUST use my method to root before this.
Optional (remove CWM recovery)(For ICS only):
This is the tricky part, the easiest way is to reflash a whole firmware via ODIN. But if you like new methods, try this:
1. DO NOT uninstall kTool or unroot your phone first!
2. Obtain a stock zImage (either you download it or extract it from a firmware package), make sure that it is meant for the firmware you are using.
3. Place the zImage in the root of your internal storage.
4. Launch kTool and select "Flash kernel from /sdcard/zImage".
5. Reboot and if you boot into recovery by Volume Up + Home + Power buttons, you will now see the default stock 3e recovery.
6. Now you can unroot your device.
Optional (remove CWM recovery)(For JB only):
1. Download stock_XXLSR_kernel.zip from here: http://bit.ly/XCEejd and place it into your external sdcard/internal sdcard.
3. Power off your device COMPLETELY.
4. Boot into recovery mode by pressing Volume up + Home + Power buttons simultaneously.
5. Navigate to "Install zip from sdcard" using the volume buttons.
6. Select it by pressing the Power button.
7. Select "Install zip from sdcard" if you placed it in the external sdcard, or select "Install zip from internal storage" if you placed it in the internal sdcard.
8. Navigate and select stock_XXLSR_kernel.zip.
9. Wait for it to finish.
10. Select "reboot system now".
11. CWM recovery is now replaced by stock 3e recovery, and back to stock kernel too.
That's all from me. Happy rooting!

You are too free at 3.30 in the morning hahahaa
Nice guide btw. will help a lot of people.

Nice guide mate =)
New rooting method !
Great effort
---------- Post added at 06:40 AM ---------- Previous post was at 06:36 AM ----------
iXanza said:
You are too free at 3.30 in the morning hahahaa
Nice guide btw. will help a lot of people.
Click to expand...
Click to collapse
Lol..You too Not bad at 4AM XD

Great Guide @OP..
for the verifirst time i follow this and it working great without using my pc,,and i just do it on my friend S2 today,,
FOR NOOB*
Read and follow the instructions in the thread as what @OP wrote...
YOU MAY SUCCESSFULLY ROOT.FLASH CWM ON YOU S2
I think this this thread should be STICKY THREAD

Great Mate
will be back to our 'G' Family soon
with blast
Sent from my Xperia T using tapatalk 2

Very good guide! Great Job.
Sent from my GT-I9100G using xda premium

i cant root it say..E: failed to mount /SDcard...how to fix this...?

roshan2989 said:
i cant root it say..E: failed to mount /SDcard...how to fix this...?
Click to expand...
Click to collapse
Mount and remount your SD Card =)

Really great guide man. Super simple. Will use this to root my gf's 9100G and get her on CM once I get back to India. Especially helpful because she just burned out her USB port by dropping the phone in a toilet so she can't use odin. =_=
Sent from my 9100G, running CM10.1 / Codebox / Slim Bean, depending on the day

301stSpartan said:
Really great guide man. Super simple. Will use this to root my gf's 9100G and get her on CM once I get back to India. Especially helpful because she just burned out her USB port by dropping the phone in a toilet so she can't use odin. =_=
Sent from my 9100G, running CM10.1 / Codebox / Slim Bean, depending on the day
Click to expand...
Click to collapse
This is much better than odin hehe

Really nice. I wondered how to remove the cwm in case i have to send my device to Samsung. Now i know. Thank you
Sent from my GT-I9100G using xda app-developers app

roshan2989 said:
i cant root it say..E: failed to mount /SDcard...how to fix this...?
Click to expand...
Click to collapse
Keep in mind that you need an EXTERNAL SDCARD for this...Or you are already using one, you will have to wait a while in recovery if that happens...it takes some time...if not, reinsert your sdcard...

This is going to be a bit of a noob question, but I'm new to samsungs, I swear that rooting is very different on everything else.
Is this the best way to flash a new aosp rom? The phone is not ICS at the moment, so I was going to flash stock ICS, follow this tutorial to root, and then install some jb rom like rootbox. Or can I just do temporary CWM and flash the root box on there and keep cwm?

Re: [NEW][GUIDE][ICS] How to Root/Unroot Your I9100G Via Stock Recovery
Pinktank said:
This is going to be a bit of a noob question, but I'm new to samsungs, I swear that rooting is very different on everything else.
Is this the best way to flash a new aosp rom? The phone is not ICS at the moment, so I was going to flash stock ICS, follow this tutorial to root, and then install some jb rom like rootbox. Or can I just do temporary CWM and flash the root box on there and keep cwm?
Click to expand...
Click to collapse
No, JB ROMs require ICS bootloader...so the best way is to flash a stock ICS ROM, root it and get a kernel with CWM, then only flash the new ROM...

Re: [NEW][GUIDE][ICS] How to Root/Unroot Your I9100G Via Stock Recovery
Pinktank said:
This is going to be a bit of a noob question, but I'm new to samsungs, I swear that rooting is very different on everything else.
Is this the best way to flash a new aosp rom? The phone is not ICS at the moment, so I was going to flash stock ICS, follow this tutorial to root, and then install some jb rom like rootbox. Or can I just do temporary CWM and flash the root box on there and keep cwm?
Click to expand...
Click to collapse
U must flash ics stock firmware 1st in order to get the ics bootloader..then u can do temporary cwm and can flash any roms based on ics/jb..
Sent from my GT-I9100G using Tapatalk 2

Hi guy need ur help..im follow the step but when enter su-bb-installer
Finding update package...
Opening updated package..
Verifying updated package..
E:signature verification failed

Re: [NEW][GUIDE][ICS] How to Root/Unroot Your I9100G Via Stock Recovery
What are you on? Are you sure you are on ICS? That only happens for GB...

Thanks mate 4 quick reply..
But I'm sure my phone is ICS..already updated with Samsung kies 4.0.3

Re: [NEW][GUIDE][ICS] How to Root/Unroot Your I9100G Via Stock Recovery
Hmm...weird then...it works for most of us...then you'd have to try the method by Jiangyi on another thread...maybe Sammy changed some stuff...:\

Did the su bb installer link dead? I cant open it.

Help! Flashed paranoid android 4.6 beta 5 and my note is messed up

These are the problems. I did a clean flash and cleared the cache partition, and did a factory reset.
1. No notifications appear at all. Even when I have incoming mail and so on, no new notifications appear in the main bar. I only know things are happening when I check individual apps.
2. I have no settings tiles at all in the pull down quick settings. How do I add to this?
3. The default browser cannot be used. When I click on the icon, it opens to a blank screen and closes within half a second. It never stays open.
4. I can't boot into recovery at all. I've installed clockworkmod via Rom manager, but I cannot boot into it, nor can I use the volume up+home+power combo to reach it.
5. The home button doesn't respond at all.
Can anyone help?

Try booting into download mode and flash a stock rom via odin.

1) take titanium backup of the apps
2) copy internal SD data to PC
3) download KK kernel depending on what recovery you want i.e bauner kernel for cm/kitkat for cwm recovery and raw kernel for twrp.
4) download Odin format kernel (.tar) from bauners kernel thread (its the kernel for touchwiz jb) and keep it on PC.
3) download a different ROM and transfer with the desired kernel to SD card and external SD.
[ we are transferring it to both SD cards in case you are not able to boot to recovery and may have to flash a whole ROM to get it back ]
8) power off and put in download mode by pressing power+home+volume down
9) connect to computer and open Odin and select the tar file i.e the bauner jb kernel in PDA and flash, it will show kernel and successful.
10) once you see the galaxy note logo with yellow triangle remove the battery and don't let the device boot into ROM.
11) put the battery back and boot the device into recovery by power+home+ volume up. if it doesn't boot into recovery then try again.
12) once you are in recovery flash the KK kernel.
13) do factory data reset, wipe cache, dalvik cache and format system.
14) flash a ROM other than PA and gapps if required.
15) reboot
16) use triangle away app to get rid of the flash counter and triangle
these are the steps I followed and was able to successfully flash ROM without losing any data.
follow only if you know what you are doing. I am not responsible if you lose data or mess up your device.
Hope it helps
thank you very much
REVENGE SOLVES EVERYTHING

tysonraylee said:
1) take titanium backup of the apps
2) copy internal SD data to PC
3) download KK kernel depending on what recovery you want i.e bauner kernel for cm/kitkat for cwm recovery and raw kernel for twrp.
4) download Odin format kernel (.tar) from bauners kernel thread (its the kernel for touchwiz jb) and keep it on PC.
3) download a different ROM and transfer with the desired kernel to SD card and external SD.
[ we are transferring it to both SD cards in case you are not able to boot to recovery and may have to flash a whole ROM to get it back ]
8) power off and put in download mode by pressing power+home+volume down
9) connect to computer and open Odin and select the tar file i.e the bauner jb kernel in PDA and flash, it will show kernel and successful.
10) once you see the galaxy note logo with yellow triangle remove the battery and don't let the device boot into ROM.
11) put the battery back and boot the device into recovery by power+home+ volume up. if it doesn't boot into recovery then try again.
12) once you are in recovery flash the KK kernel.
13) do factory data reset, wipe cache, dalvik cache and format system.
14) flash a ROM other than PA and gapps if required.
15) reboot
16) use triangle away app to get rid of the flash counter and triangle
these are the steps I followed and was able to successfully flash ROM without losing any data.
follow only if you know what you are doing. I am not responsible if you lose data or mess up your device.
Hope it helps
thank you very much
REVENGE SOLVES EVERYTHING
Click to expand...
Click to collapse
can i use this method too if i had problem with storage can't detected after flashing KK ROM??

Fixed Samsung Tab SM-T110 restarting when WiFi enabled

Guys after days of searching Internet to find a solution to fix WiFi reboot loop problem, I confirmed that this custom rom is the 100% guaranteed fix
It has fixed Samsung Tab SM-T110 which was restarting every time I enabled the WiFi. thanks to (CriskeloROM Custom Rom).
For those asking about the step-by-step Instructions, here you go:
Before you start, you should visit this thread (http://forum.xda-developers.com/showthread.php?t=2766612) and download some files:
1) Root Fix (https://mega.co.nz/#!tFYCkS4Y!W4piaGG5nxP9vlecFR4Z5E85q9-IcivEsBez2Tk_9-c)
2) Stock Recovery (https://mega.co.nz/#!cAZCTAbY!Mwt5N58yxNFzMDDkA5Y2qq5SDr8laAcEBK8CkXi2W_Q)
3) Philz Recovery (https://mega.co.nz/#!sUQyBIBb!NAEMOLl3GOcwj3KAHe6h2hXFYSOdw5fqUr-JNqLJzG0)
4) CriskeloROM (https://mega.co.nz/#!BUgXQKzQ!sa2GBqTG3mDpAquMlU6fCvFLT8lZjn_jvlZflVTU36w)
Now lets start:
1. Wipe Your Device:
1.1: Reboot in "Stock Recovery" Mode: "Volume-Up, Power, Home".
1.2: Wipe your device.
2. Install TWRP Custom Recovery:
2.1 Reboot in "Download" Mode.
2.2 Start Odin.
2.3 Use "AP" to install TWRP custom recovery.
2.4 Restart your Device when finished.
3. Install CriskeloROM Custom Rom:
3.1 Start the device.
3.2 Copy the three zip files after downloading is complete to SDCARD or Device: (Root Fix, Stock Recovery, CriskeloROM Rom) .
3.3 Reboot in "Recovery" Mode.
3.4 Select Install from Zip.
3.5 Use TWRP to browse to location where you copied the three files on your SDCARD or Device.
3.6 Select all zip files one by one.
3.7 Click Install and follow the on screen instructions (no restarts in-between) until all finished.
3.8 Reboot and Enjoy.
4. Install philz_touch (fix bootloop)
4.1 Start Odin.
4.2 Use "AP" to install philz_touch.
4.3 Restrat your Device when finished.
Good Luck !

philz_touch (fix bootloop) - no such thing afaik
khaledkoush said:
4. Install philz_touch (fix bootloop)
Click to expand...
Click to collapse
wtf ure talking about?
afaik there is no PhilZ on T110 which has the boot loop fixed.
Also the T110 does usually not reboot upon Wifi switch-on. That seems to be a individual problem with ure very T110.

khaledkoush said:
Guys after days of searching Internet to find a solution to fix WiFi reboot loop problem, I confirmed that this custom rom is the 100% guaranteed fix
It has fixed Samsung Tab SM-T110 which was restarting every time I enabled the WiFi. thanks to (CriskeloROM Custom Rom).
For those asking about the step-by-step Instructions, here you go:
Before you start, you should visit this thread (http://forum.xda-developers.com/showthread.php?t=2766612) and download some files:
1) Root Fix (https://mega.co.nz/#!tFYCkS4Y!W4piaGG5nxP9vlecFR4Z5E85q9-IcivEsBez2Tk_9-c)
2) Stock Recovery (https://mega.co.nz/#!cAZCTAbY!Mwt5N58yxNFzMDDkA5Y2qq5SDr8laAcEBK8CkXi2W_Q)
3) Philz Recovery (https://mega.co.nz/#!sUQyBIBb!NAEMOLl3GOcwj3KAHe6h2hXFYSOdw5fqUr-JNqLJzG0)
4) CriskeloROM (https://mega.co.nz/#!BUgXQKzQ!sa2GBqTG3mDpAquMlU6fCvFLT8lZjn_jvlZflVTU36w)
Now lets start:
1. Wipe Your Device:
1.1: Reboot in "Stock Recovery" Mode: "Volume-Up, Power, Home".
1.2: Wipe your device.
2. Install TWRP Custom Recovery:
2.1 Reboot in "Download" Mode.
2.2 Start Odin.
2.3 Use "AP" to install TWRP custom recovery.
2.4 Restart your Device when finished.
3. Install CriskeloROM Custom Rom:
3.1 Start the device.
3.2 Copy the three zip files after downloading is complete to SDCARD or Device: (Root Fix, Stock Recovery, CriskeloROM Rom) .
3.3 Reboot in "Recovery" Mode.
3.4 Select Install from Zip.
3.5 Use TWRP to browse to location where you copied the three files on your SDCARD or Device.
3.6 Select all zip files one by one.
3.7 Click Install and follow the on screen instructions (no restarts in-between) until all finished.
3.8 Reboot and Enjoy.
4. Install philz_touch (fix bootloop)
4.1 Start Odin.
4.2 Use "AP" to install philz_touch.
4.3 Restrat your Device when finished.
Good Luck !
Click to expand...
Click to collapse
Please give me new link for files ,because invalid all link!