Hi Devs,
I was wondering if there is a way to modify the photowall live wallpaper and add your own pictures, I tried to look for a guide & modified app, however no luck.
Found 1 modified apk with batman pics but that didnt work.
Please let me know if anyone has been able to modify or is working on this.
Regards,
[email protected]
If at beginning of your title you put " (REQUEST) "then you might get better and faster answer.
Sent from my SGH-I897 using xda premium
Steps To Modify SGS3 Photowall Live Wallpaper
Hi All,
I had tried multiple roms and when used the Photowall Live Wallpaper, I could not point it to the photo gallery to use my own pics. The gallery would never open and I had to do with the default pics which came with the SGS3. (Not sure if anyone has faced this issue).
After playing around with the apk files I did find a way to use my own pics in the PhotoWall Live Wallpaper. I hope you would like this.
A: Uploading your pictures in the Photowall.apk file.
1. Select a maximum of 8 pictures that you wish to use in the Photowall and move them to a folder on your desktop.
2. Rename the 8 pictures as follows: g1p1.jpg / g1p2.jpg / g1p3.jpg / g1p4.jpg / g1p5.jpg / g1p6.jpg / g2p1.jpg / g2p2.jpg
3. Extract the Photowall.apk from ICS ROM onto a folder on your desktop. (I used RemICS v1.3, haven’t tried this is on any other ROM).
4. Open the apk file using winrar. (Do not extract, just open)…. Navigate to the PhotoWall.apk\res\raw folder.
5. You should be able to see the files as shown in the screenshot 1.jpg
6. Click on “Add” and navigate to the folder where you have stored the pictures (remember to rename them as mentioned in step 2).
7. Select the files and click “OK”. This will replace the original files in the Photowall.apk.
8. Once this is done, exit/close the apk file opened in winrar.
You can try installing this file directly by copying it to your phone, however that didn’t work on my phone.
B: Uploading your customized Photowall.apk file in your ROM. (Tested on RemICS v1.3).
1.Open the Rom that you wish to flash (I used RemICS UX v1.3) using winrar (do not extract)
2.Navigate to \data\app folder.
3.Click on “Add” and navigate to the folder where you have saved your customized Photowall.apk. (Make sure that the name is “Photowall.apk”).
4.This will replace the original Photowall.apk with your customized file.
5.Exit and save the zip file.
6.Use the new edited Rom and copy it to the root of your “Internal SD” card.
7.Reboot the phone to “Recovery” and flash the new Rom. (I did not lose my data & settings as I did not wipe cache partition or Data/Factory, however this may or may not work for you. To be on a safer side please backup your data and applications. I will not be responsible for any data loss or bricked devices while trying this procedure. Try at your own risk.).
You can watch the video on the link below (sorry for the poor quality)
http://www.youtube.com/watch?v=Yd2VCzvphu8&feature=youtu.be
Special thanks toTeam RemICS for the beautiful Rom.
If you liked my work, please use the thanks meter.
- Disclaimer -
This product/steps is/are free to use at your own risk. I take no
responsibility for any conflict, fault, data loss or damage caused by this procedure.
No warranties, implied or otherwise, are given if you agree to use this product.
No problems were found while testing this on my Samsung Captivate device. your experience may vary.
maqbulsayed said:
B: Uploading your customized Photowall.apk file in your ROM. (Tested on RemICS v1.3).
1.Open the Rom that you wish to flash (I used RemICS UX v1.3) using winrar (do not extract)
2.Navigate to \data\app folder.
3.Click on “Add” and navigate to the folder where you have saved your customized Photowall.apk. (Make sure that the name is “Photowall.apk”).
4.This will replace the original Photowall.apk with your customized file.
5.Exit and save the zip file.
6.Use the new edited Rom and copy it to the root of your “Internal SD” card.
7.Reboot the phone to “Recovery” and flash the new Rom.
Click to expand...
Click to collapse
I think you over complicated the install process by a bit...
Why not just use a file explorer with root permissions and place the new Photowall.apk back to /system/app where it actually belongs, reboot the phone and be done with it? (/system/app is where live wallpapers that come with the phone are located by default, not /data/app)
As you can see here on my GS3, two of the several live wallpapers (phase beam and photo wall) are in /system/app
And these are the proper permissions for the apk
I tried that, but that wont work..... that the reason i mentioned
" You can try installing this file directly by copying it to your phone, however that didn’t work on my phone. "
Unfortunately wht u menitioned didnt work for me...
correct me if I am wrong... did u mention SG3... for SG3, you dont need to modify the photowall.apk, if you go to the wallpaper settings you can select pics from your gallery..
maqbulsayed said:
I tried that, but that wont work..... that the reason i mentioned
" You can try installing this file directly by copying it to your phone, however that didn’t work on my phone. "
Unfortunately wht u menitioned didnt work for me...
correct me if I am wrong... did u mention SG3... for SG3, you dont need to modify the photowall.apk, if you go to the wallpaper settings you can select pics from your gallery..
Click to expand...
Click to collapse
Yes, I understand that on the SG3 you don't need to do this, but on a Captivate, I don't see why you wouldn't be able to place it in /system/app and still have it work.
Related
FACT : You cannot share a paid app that you modified (themed)
ALTERNATIVE: This script.
This is for themer's who would like to share a paid app that they themed but can't due to the rules.
Instructions for the themer :
1. Download zip
2. Extract zip
3. Run script (RunMe.bat)
4. Enter information
5. It'll produce a .zip
6. This zip has all the necessities for a user to get ur theme onto their paid app (Just upload that zip for users)
Instructions for the user :
1. Download zip
2. Extract zip
3. Make sure phone is connected to pc
4. Make sure u have adb/java
5. Make sure the app is installed on ur phone
6. Run the script
7. Done
The script that this script produces does the following :
1. Pulls apk from phone <- This is the key, if apk is not on ur phone, u can't do anything
2. Extracts apk
3. Replaces ur images/mods in folders u mentioned
4. Zips the apk
5. Signs the apk
6. Uninstalls that app from your phone
7. Installs themed apk
8. Done
Side-effects :
- Non froyo devices will be able to see that there is an update if they install the modified apk, however on froyo devices it wont
- U will not be able to update that app from the market, u'll have to uninstall that app, reinstall updated version from market and then apply the patch again.
Wow, got to try that out!-thanx a lot!!!
rori~ said:
Wow, got to try that out!-thanx a lot!!!
Click to expand...
Click to collapse
Cool, let me know how it works out.
im the one who pm you earlier
so i been playing with this script but it always ends up with a .zip that has an empty placeapkherefolde (going of memory) im sure im not putting right info in,i will play with it a little more
first thing i notice is when i extract the file from op,i dont have that extra folder as in the video
sneaky_zekey said:
so i been playing with this script but it always ends up with a .zip that has an empty placeapkherefolde (going of memory) im sure im not putting right info in,i will play with it a little more
first thing i notice is when i extract the file from op,i dont have that extra folder as in the video
Click to expand...
Click to collapse
Hmm the "placehere" folder is missing from my zip for some-reason. Regardless these are the steps u shud take :
1. Extract zip
2. U shud have (7za.exe,RunMe.bat,signapk.jar,testkey.pk8,testkey.x509.pem)
3. make a folder called "placehere"
4. Create folders inside as per need (refer to video for that)
5. Run the script
6. U'll end up with a zip where u just need to extract the zip and run the script inside.
I just tested it and i don't have an empty zip, try again and let me know.
I just told someone today this wasnt possible... thank you sir...
Daneshm, does it replace edited xml.files too?
rori~ said:
Daneshm, does it replace edited xml.files too?
Click to expand...
Click to collapse
Yea i think so. Basically anything u include it'll copy to the directory u specify and replace those pre-existing files.
Thanx, so will try...
Sent from my Nexus One
I'm not getting the folder either....anyway to fix this?
wish this was available for mac
Mods please delete. I figured out my errors and all is well.
If anyone is having trouble with this as I was, please refer to these instructions. I'm sorry, I forget who posted them but credit to whoever you are. Big help.
1. Transfer the apk from your phone to your computer. It's probably in a place like data/app or data/data or the like
2. Open the apk with 7zip. Do not extract the whole thing, just open it. Inside you'll see a folder called "res"; transfer that somewhere on your computer.
3. Inside the res folder you'll see a bunch of folders. The images you want to edit are usually in a folder labeled "drawable", but you may have to look elsewhere
4. Find the background image you want to edit. It might be labeled widget_bg or something helpful like that.
5. Edit it how you want. In the case of transparency, you want to delete the background and make it entirely transparent. Save it in the same format and do not change the name. (Note- if your file has .9.png in it, you have to open your edited version using draw9xpatch or whatever in the Android SDK and save it through that as well)
6. Drag the res folder with your modified images back into the archive, using 7zip. You might want to use a duplicate of the apk, just to have the original on hand in case something goes wrong.
8. Place the modified apk into the place-apk-here-for-modding folder in the APK Manager folder
9. Open up script.bat. Select your project using option 22.
10. Do the following things- Extract APK (1), Zip APK (3), zip as regular apk (2), sign apk (4)
At this point you should have a signed version of the apk in the place-apk-here-for-modding folder. You can transfer it to your phone now and install it. Or install it directly onto your phone through apk manager if you have ADB enabled.
Click to expand...
Click to collapse
Thanks!
Wait a minute, you click on the application from your file manager, opening it in your App Manager, and it says Application not Installed?
That makes no sense at all. The only time I've encountered that is when I've tried using an app that was stored on my SD card, which wasn't put in. That app was on my homescreen too.
I'll have the .apk on my SD card somewhere and I'll try to install in through a file explorer with the error message above.
I tried installing through Dropbox, but that also gets me the error message. I've uninstalled all applications of the same name because that's what you're supposed to do. It's weird, I know. I'm trying to work through it right now.
see OP
10char
Same problem
Hello gentlemen, i have some problem with installing "slide it keyboard" and others applications. The messages is: application not installed. I tried everything, but nothing works... Please help me.
HTC desire 2.2 froyo
I'm trying to change the icons on the app drawer with Root Explorer but I can't find the correct PNG to replace that on the system/app/"application.apk"/res/drawable/_____.png
Anyone knows the right name of the icon?
Thanks!
res/drawable-hdpi/file_manager_r.png ypu will have to turn the apk into a zip then put your new file into the hdpi folder and change the zip back to an apk then re install
Can I follow this steps with the Captivate or I need to do this on the computer?
Any easy way?
Thanks for the tip!
hi, i changed an image in drawable-hdpi in "phone.apk" (ic_jog_dial_unlock.png) like aceman said, but if i try to install new phone.apk it says "application not installed" (or something similar, my language phone is not english). how can i install new phone.apk??
I tried to istall it from recovery and there is the same result
thanks
You have to push the phone.apk file into /system/app with a root explorer or adb. Just installing it won't work like most other apks.
i have "root browser", can i use it? can u say to me all the steps i have to do with it or adb? i'm not an android expert user...
up...anyone ca help me?
install a different launcher app that lets you customize it. try launcherpro from the android market.
you wont understand the mod instructions.
screw it here they are...
mod instructions... basic if you need more info. learn to search there are 4000 guides on how to change an app image.
you need winrar on windows. if you arent running windows you should know better.
use root level file manager to go to 'system/app' folder and copy your launcher.apk to sdcard.
copy to PC
right click .apk > open with... > choose program > WinRar
look through folders inside APK and copy all folders with .PNG images to desktop (or work folder)
look through the images in the folders (change veiw to thumbnails) and find the name of the image you want to change and the name of the folder it was in.
Go get, or create your custom image, and name it that name. **Close to original shape size.
Use winRar to open the .APK again and naviage to the place where your image goes and drop the new one into that folder.
A window with options will come up and select Compression Profile : STORE
Click ok
Close winrar.
Copy .apk to SDcard
Use root file manager to rename original /system/app/launcher.apk to launcher.apk.bak (backup)
Then copy your modded .apk to /system/app.
Reboot (pull battery)
DONT MESS WITH ANY IMAGE ENDING IN .9.PNG only regular .pngs
for more on .9.pngs... search google.. what is ....
i*have*to*modify*phone.apk,*no*launcher.apk..*i*just*did*steps*you*sayd,*but*if*i*try*to*rename*phone.apk,*my*nexus*goes*in*full*crash
fist off this is the Captivate forums. not nexus.
and i was giving help to OP question not yours. either way the *stars*and*sp ac*es are friggin annoying. use your computer if your phone is messed up.
if you "tried" to modify the name... DID IT? try doesnt tell me much.
if it wouldnt let you, then nothing changed and your phone is screwed up from something else.
if it DID rename, then CHANGE IT BACK.. duh.
sorry for space and *, i wrote it with the mouse using google translate keybord and i saw them when i cut/past the text
i "tried" to rename phone.apk, so the phone went in a full crash and i had to restore system using an old backup in recovery
paino85 said:
sorry for space and *, i wrote it with the mouse using google translate keybord and i saw them when i cut/past the text
i "tried" to rename phone.apk, so the phone went in a full crash and i had to restore system using an old backup in recovery
Click to expand...
Click to collapse
Try apktool to extract all replace wteva ocon u want to and rebuild apk using the same tool and u need to sign the apk usin signapk tool so that device can recognise the.apk file for installation. I have done this and everything went fine in galaxy note. But i couldn't locate the file to rename the icon. Icon changing was not a prob.
this is my 1st modding so bare with me. ive tried few times today with sending framework to my phone and always ended with bootloop
so i gave up after few reflashes of rom (stock)
here is what i did so far
1. read many pages here and round web
2. pulled framework-res.apk via adb
3. copied my customized pngs to appropriate folders
4. pushed framework back to phone using adb shell...
5. bootloop.... .... ....
im adding my modified framework if any of more capable mods are willing to help
framework-res.zip
framework-res.rar -> rename to framework-res.z01
indycar said:
this is my 1st modding so bare with me. ive tried few times today with sending framework to my phone and always ended with bootloop
so i gave up after few reflashes of rom (stock)
here is what i did so far
1. read many pages here and round web
2. pulled framework-res.apk via adb
3. copied my customized pngs to appropriate folders
4. pushed framework back to phone using adb shell...
5. bootloop.... .... ....
im adding my modified framework if any of more capable mods are willing to help
framework-res.zip
framework-res.rar -> rename to framework-res.z01
Click to expand...
Click to collapse
Here is what you do
1- forget ADB
2- copy framework-res.apk from /framework to the sd card
2- move it from sd card to pc
3-using winrar or 7zip, click on add, and select your new icons ( make sure they are the same dimensions aka width and length)
4- move the app to your sd card
5- now on your phone, move the apk to /system and set permissions
6- move th apk to /system/framework and overwrite the existing apk
Press thanks if I helped
blakstar said:
3-using winrar or 7zip, click on add, and select your new icons ( make sure they are the same dimensions aka width and length)
Press thanks if I helped
Click to expand...
Click to collapse
they are same size i just used different colour instead boring white
will try tomorrow after i get home from work
ok i think i managed to get it work
i made recovery zip and i think it worked
expected more icons to be changed :\
Hi, I want to know if I can rip the AOSP gallery from a installed ROM (or ROM zip).
I also need the editor to work.
Who can help me out on this matter?
Thanks for your replies!
franatic08 said:
Hi, I want to know if I can rip the AOSP gallery from a installed ROM (or ROM zip).
I also need the editor to work.
Who can help me out on this matter?
Thanks for your replies!
Click to expand...
Click to collapse
For ROM zip you would need to unzip it using 7-zip, then navigate the system/app folder and find what might be a folder called "gallery" everything you need should be inside that folder. For an installed ROM just use a file explorer app and navigate to the system/app folder then copy and paste the gallery to the root of your internal storage. All this assumes the gallery is in the same location as the photos app is on my stock ROM.
Awesome, found it.
I usually backed it up using ES Explorer, but that broke the editor.
The lib folder is now included, so I should be good to go. Will try later!
Thanks!
BladeRunner said:
For ROM zip you would need to unzip it using 7-zip, then navigate the system/app folder and find what might be a folder called "gallery" everything you need should be inside that folder. For an installed ROM just use a file explorer app and navigate to the system/app folder then copy and paste the gallery to the root of your internal storage. All this assumes the gallery is in the same location as the photos app is on my stock ROM.
Click to expand...
Click to collapse
The unzip will not completely work with the changes google is making. The newer compiled roms are compiled into images and not like they used to be.
franatic08 said:
Hi, I want to know if I can rip the AOSP gallery from a installed ROM (or ROM zip).
I also need the editor to work.
Who can help me out on this matter?
Thanks for your replies!
Click to expand...
Click to collapse
Forget about ripping it from a sysimage. Install it as an application from specially modified sources;
https://github.com/lbdroid/android_packages_apps_Gallery2
Or if you trust me, binary; https://github.com/lbdroid/Android-Binaries/blob/master/Gallery2.apk
zelendel said:
The unzip will not completely work with the changes google is making. The newer compiled roms are compiled into images and not like they used to be.
Click to expand...
Click to collapse
doitright said:
Forget about ripping it from a sysimage. Install it as an application from specially modified sources;
https://github.com/lbdroid/android_packages_apps_Gallery2
Or if you trust me, binary; https://github.com/lbdroid/Android-Binaries/blob/master/Gallery2.apk
Click to expand...
Click to collapse
I already encountered the image thing you both mention.
Luckily I was able to pull it from the installed ROM.
Got it working now. Editor works just fine.
Last thing though...
Each time I hit the edit button, the pop-up for "select action" shows up. It only displays the editor to select.
Is there any way I can get rid of that?
Setting a default action for it somehow, somewhere?
This selection menu