Database Develop

[Q] Odin flash help

Dear fellow Galaxians
I have a problem..recently I flashed my Galaxy S with i9000xxjpy. This caused change of product code from TOP (Serbia) to KOR. Also, I lost Serbian swype
How to:
-stay on this version of firmware
-have Serbian swype (TOP product code)
When I flashed with Odin I only had one .tar file which I put to PDA (I didn't have separate modem and csc file).
Now, would the solution be to flash again with the same file and to separately add some Multi CSC file containing TOP product code?
Would it get back swype on Serbian ?
Thns for any help

http://www.megaupload.com/?d=HVOGTEU1 serbian swype. not sure which version. but u could try it.

Ok, but how to flash it? Can I flash it separately with odin and just that file or I have to do whole flash procedure with pda, modem and csc file?

That fails build yourself a new rom in the kitchen it has multiple CSC .
http://forum.xda-developers.com/showthread.php?t=817703
Selection of CSC for your region and operator including SMO
jje

Ok...I hope at the end it would look like a normal flash procedure, without some custom piece of junk and rooting and hacking and...
Thank you very much

I tried to install this swype version you sent but it fails....

i just googled it for you, i didnt know wether it worked or not, i would try JJEgan's method. that seems your best bet.

[Q] a question about debranding, which firmware.

hello,
my phone is branded to orange in the uk. i have been looking into this for the past 3 days.
i am now at the point where i am ready to flash with odin but i am unsure which firmware to flash with, and i have read so much info im getting my head all wrapped around the situation
basically my current firmware is
PDA:I9000 BVJS4
PHONE: I9000 BVJP4
CSC: I9000 ORAJS4
version 2.2.1
i have looked at http://www.samfirmware.com/WEBPROTECT-i9000.htm and the amount of firmware staggers me not one all i am requesting if someone would be so kind and reply saying "flash this one mate"
i may have already read the answer but i have spent 3 days trying to figure it out for myself.
it was locked to orange but i have since unlocked it. it is currently rooted.
im not particularly bothered about warranty because i can add it to my home insurance to cover loss or damage. and from what i have read the phone is difficult to brick fully,
i have the download mode already, its just a case of get the firmware and flash.
i apologise for the very long post and i hope someone can help me
thanks for reading.
EDIT: i already have a backup of the efs folder

in my opinion don't use odin only , only if you want stock or root . Go to Doc Rambone's kitchen and build yourself your desired rom . I suggest JS8 wipe (you will lose all your data) or nonwipe ( you will have crappy data from previous rom ) , select your own csc if you want APN Settings , hardcore/SuperCurio/DamianGTO(never tested this) Kernel at your own desire , an european modem , themes sounds and boot amination at your own desire and need , and at apps and tweaks choose what you think you will use. SORRY FOR CRAPPY ENGLISH ( I'm not a native English speaker and I wrote very quickly .

I agree you can choose a CSC to suit your network .
CPW CSC covers all UK networks .
XWJS8 v9.9.5 WIPE base rom
CPW csc
Hardcore's Kernel *RECOMMENDED* kernel
JPX modem
Apps choose what you want .
Themes and boot animation choose what you want .
http://romkitchen.org/sgs/?s=generator
http://forum.xda-developers.com/showthread.php?t=817703
jje

thamks guys, i have used odin to flash the new jvk firmware, (there is an app on market for my apn settings (im on giffgaff))
i have used criskelo's rom in the develeopment forum with his theme.
it really does amaze me when only 2 weeks ago i didnht know anything about odin or flashing and now i can downgrade/upgrade my firmware using odin, root it. and its all thanks to this wonderful website!
i even know how to install different themes etc and now i just installed a battery im just astounded.
there are a few other questions:
1) if i want to change my theme, can i just install it over the old one using cwm?
2) is there a thread/website etc where i can download certain mods? (ie i see a few of the themes have the market in different colours, different lock-screens, i just wondered if there was another place where i can get these from to install)
3) http://forum.xda-developers.com/showthread.php?t=934729&highlight=theme+creator i have found this but there doesnt seem to be a guide or anything, i cant get it to download the framework from my phone? i have tried in usb mode (kies and mass storage) download mode and mounting usb storage from the cwm. what i havent ried is with debugging mode on.

gazza1988 said:
thamks guys, i have used odin to flash the new jvk firmware, (there is an app on market for my apn settings (im on giffgaff))
i have used criskelo's rom in the develeopment forum with his theme.
it really does amaze me when only 2 weeks ago i didnht know anything about odin or flashing and now i can downgrade/upgrade my firmware using odin, root it. and its all thanks to this wonderful website!
i even know how to install different themes etc and now i just installed a battery im just astounded.
...
Click to expand...
Click to collapse
hi gazza1988, good to know u were able to debrand and flash the firmware through ODIN.
I also got my SGS through 3 UK. Its unlocked now.
But i am not am not able to install any apps and market is also not working. I also want to remove the branding.
My current config is :
PDA : I9000NEJP5
PHONE : I9000NEJP2
CSC : I9000HCGJP5
I want to flash to a stable stock firmware. Some people on forums suggested to flash JS8.
I downloaded I9000XWJS8 from samfirmwares.com but it has only one file - NEE.tar (which i guess is PDA file).
Will my current modem and CSC be compatible with I9000XWJS8 ?? Do i need to include .PIT file and select repartition ??

hi, if you want to debrand you will need new complete (ie 3 firmwares csc pda phone etc)
i assume you have odin already
if you want to debrand then download the jpu firmware (has all 3 files) here http://hotfile.com/dl/99955459/dea6962/I9000XXJPU.rar.html password for archive is samfirmware.com
once you have flashed that one go back into download mode and flash the NEE.tar as PDA to update to JS8.

gazza1988 said:
hi, if you want to debrand you will need new complete (ie 3 firmwares csc pda phone etc)
i assume you have odin already
if you want to debrand then download the jpu firmware (has all 3 files) here http://hotfile.com/dl/99955459/dea6962/I9000XXJPU.rar.html password for archive is samfirmware.com
once you have flashed that one go back into download mode and flash the NEE.tar as PDA to update to JS8.
Click to expand...
Click to collapse
Thanks for the quick reply man !!!
Do i also need to select PIT file and select re-partition ??
Also samfirmware has listed I9000XXJPU firmware download as 1 file only. Link
Like this :
I9000XXJPU ## | 512.PIT | Version 2.2.1 | 2010 December | DOWNLOAD | 1 file select NO .PIT
I've have started the download anyway, so lets see.
As i'm using my SGS in India, is it better to flash an Asian firmware with CSC which has info about indian networks ?? Can u tell me which Asian firmware on this page has all 3 files ?

possibly would be better to flash asian but what the effects of changing from one region to another are im not 100% may be worth startin a new topic in this forum as people are less inclined to look in here as they think my issue is being seen to by someone else.
the asian firmware for india is DD (ie I9000DDxxx so i would guess that the I9000DDJF2 would contain all 3 files to flash then you would have to flash I9000DDJP6 to get indian stock froyo firmware. but i would ask a more experienced person about moving regions i was a noob at this 2 weeks ago.
i am 90% certain that flashing indian firmware would debrand and enable the market, it may be worth adding a post to this thread detailing what you have now and what you would like (ie branded uk firmware to stock indian firmware - it may also be worth asking if you can use european firmware with a indian csc as i have read the indian froyo is not very good)
the reason you cant download apps from the market would be your location (ie the phone's firmware is 3 UK and you are in india so it get "confused". do you have 3g connectivity.
i have researched some of this and the CSC (country specific code) is what holds the apn settings etc so you would need an indian csc

gazza1988 said:
... do you have 3g connectivity ...
Click to expand...
Click to collapse
Yes, i have 3g, but not able to sign in to google account even with 3g. And the strange part is that i can't even directly install most of the apk files. Adobe flash player apk didn't install. Even asphalt 5 didn't install. I was able to install Winamp for android. I downloaded many apks for the internet (some of them specifically packed for SGS) but 99% of them don't install on my SGS.
I have started this thread, so lets see.
Is I9000XXJPU a Unbranded firmware ?? I think we can safely assume that if I9000XXJPU firmware is designed for factory unlocked phones sold by samsung in Europe when i could solve the market issues. And i can manually enter the APN settings of my network. The issue currently i think is the 3 UK crap.

[Q] Q : how to flash samfirmware tar file ?

hi every one
i just downloaded il orange rom 2.3.3 from sammobile i tried million times to flash it with odin , odin every time says pass but the i9000 just still booting .
i tried to remove the battery , to use pit file with the rom , to flash with defferent odin versions but it still the same , odin says pass but the phone booting all the time .
the rom is a tar file .
( every else rom "not tar file" working fine , but i need to flash the original rom )
any body can help me please ?

Download this guide. It is a direct link from the sammobile site.
How long are you waiting for the phone to start up. If you aren't waiting up to 30mins it is not long enough.
You should receive all the files required within the .zip file you downloaded from sammobile.com. If it was a single .tar file put it in PDA, if it is .pit file as well use that as well.
Does that help?

thank you , but i waited more than 30 min until the phone had become very hot then i feared to broke it .
it's a single tar file , should i use pit file with it ?
( in the guide samsung explains how to flash with non single file rom )

If the pit file came with the package then yes use it!
Can you give me a link to the rom you downloaded, and a link to the page you saw the list of firmwares for you.
What rom were you using before?
Also copy and paste what is says when you finish flashing, a screenshot would probably be better.
And lastly have you tried another computer?

F.M.K said:
3. i tried another original roms like cellcom rom its the same , but another roms like 2.3.6 and ics working just fine only the roms from sammobile do this to me .
4. i don't know how to take screen shoot of the mobile.
Click to expand...
Click to collapse
Make sure re-partition was ticked when you use the pit file.
Is there any reason you need a stock rom??
Ok it could be a bug with that FW somehow, try the links here
If the link is not there or after you try and flash the above rom and you still want to install the FW from sammobile then try after using the most similar firmwares above.
Finally if all that still doesn't work then download and install this.
Hopefully after installing that you can install the original. Or just stay with one of the other original roms above. I don't think having a carrier version of the rom is that important, but you know better than me because I assume it is important in your country.
If you do decide to stick with any of the firmware above then make sure you type in *#262*your imei# and select your correct csc code (3 letter code). Changing the selected code will reboot and factory reset your phone!

Talon26 said:
Make sure re-partition was ticked when you use the pit file.
Is there any reason you need a stock rom??
Ok it could be a bug with that FW somehow, try the links here
If the link is not there or after you try and flash the above rom and you still want to install the FW from sammobile then try after using the most similar firmwares above.
Finally if all that still doesn't work then download and install this.
Hopefully after installing that you can install the original. Or just stay with one of the other original roms above. I don't think having a carrier version of the rom is that important, but you know better than me because I assume it is important in your country.
If you do decide to stick with any of the firmware above then make sure you type in *#262*your imei# and select your correct csc code (3 letter code). Changing the selected code will reboot and factory reset your phone!
Click to expand...
Click to collapse
first of all thanks to you for helping me
second : i need afirmware with arabic , hebrew & english interface build in - only the il original one have this .
third : there is 3 providers in israel cellcom pelephone & orange , orange have a special band not like the others & this is the provider i use .
4. all the non original roms and ics's have too much problems , like radio dosn't work , low signal , market unfotunetly stoped , Restarts suddenly.

If you have a special band are you sure you have the i9000?? Is it another version of i9000 like i9000T or something. Check your box or the back of your phone after taking out the battery.
Again have you checked the firmware here it is the original firmware. It has JV9 firmware and therefore probably has your languages.. and once the correct csc is in and your APN is correct all should be fine.
This is all assuming that your phone is actually gt-i9000 not another variant.
Also the links i provide are generally quite stable and so have little or no bugs. For example this is known to be quite stable. However i am not sure about the languages..
Just found this link click by searching for the firmware name in google
And then if that doesn't work then you are not meant to have that update. Use the link for the firmware called I9000JHJV8 on sammobile, it is the earlier firmware however should fit your requirements. After setting the CSC and apn attach it to your computer with Kies and it will update to the latest.

Talon26 said:
If you have a special band are you sure you have the i9000?? Is it another version of i9000 like i9000T or something. Check your box or the back of your phone after taking out the battery.
Again have you checked the firmware here it is the original firmware. It has JV9 firmware and therefore probably has your languages.. and once the correct csc is in and your APN is correct all should be fine.
This is all assuming that your phone is actually gt-i9000 not another variant.
Also the links i provide are generally quite stable and so have little or no bugs. For example this is known to be quite stable. However i am not sure about the languages..
Just found this link click by searching for the firmware name in google
And then if that doesn't work then you are not meant to have that update. Use the link for the firmware called I9000JHJV8 on sammobile, it is the earlier firmware however should fit your requirements. After setting the CSC and apn attach it to your computer with Kies and it will update to the latest.
Click to expand...
Click to collapse
all the links you gave me is the same of sammobile firmware , the same files , only the darky that is very nice one its working fine i think but not the original one .
thank you

http://forum.xda-developers.com/showthread.php?t=1102881
Above link is a thread on xda, that has stock firmware... find one you want the same one if you can...
http://samsung-updates.com/gt-i9000-samsung-galaxy-s/
Is a link to list that has same firmware you are trying to use from sammobile.
The reason i am giving you these links is because the files that you downloaded from sammobile.com may be corrupted. These are alternative links of the SAME firmware but different files.
Finally if these do not work and you have the same outcome that the phone does not boot. Then download and install the firmware called I9000JHJV8 on sammobile.com. It is the earlier firmware however should fit your requirements. After setting the CSC and APN connect your phone to your PC. Use Samsung Kies to update your phone.

Talon26 said:
http://forum.xda-developers.com/showthread.php?t=1102881
Above link is a thread on xda, that has stock firmware... find one you want the same one if you can...
http://samsung-updates.com/gt-i9000-samsung-galaxy-s/
Is a link to list that has same firmware you are trying to use from sammobile.
The reason i am giving you these links is because the files that you downloaded from sammobile.com may be corrupted. These are alternative links of the SAME firmware but different files.
Finally if these do not work and you have the same outcome that the phone does not boot. Then download and install the firmware called I9000JHJV8 on sammobile.com. It is the earlier firmware however should fit your requirements. After setting the CSC and APN connect your phone to your PC. Use Samsung Kies to update your phone.
Click to expand...
Click to collapse
i thing you are not understanding me , the proccess of flashing the phone completes just fine and the phone start booting but it still booting ( the booting animation working fine ) it get not into the system .
i think the problem is the single tar file because all the roms with three files and icses working fine .
if there is a way to un.tar the file and made from it 3 md5 files to flash with odin maybe it will works.

F.M.K said:
i thing you are not understanding me , the proccess of flashing the phone completes just fine and the phone start booting but it still booting ( the booting animation working fine ) it get not into the system .
i think the problem is the single tar file because all the roms with three files and icses working fine .
if there is a way to un.tar the file and made from it 3 md5 files to flash with odin maybe it will works.
Click to expand...
Click to collapse
You are right I wasn't understanding...
http://forum.xda-developers.com/showthread.php?t=965190
This is a guide to repackage the tar file...

Talon26 said:
You are right I wasn't understanding...
http://forum.xda-developers.com/showthread.php?t=965190
This is a guide to repackage the tar file...
Click to expand...
Click to collapse
you are very kind person . thank you very much . thats it .
every thing works fine .

[HELP] G800F - How to upgrade to lollipop

Hi,
I'm from Slovakia, I have S5 mini model SM-G800F, G800FXXU1AOG2.
Is there any way to uprage my phone officialy without breaking KNOX, warranty void, or anything else?
There are no new updates when I try to update throught OTA or KIES.
Thanks!

What's your phone's CSC code? Get it and look on this page for a 5.1.1 ROM that matches it:
http://www.sammobile.com/firmwares/database/SM-G800F/
It would be good if someone else could confirm it, but from what I've read if you flash a stock ROM it won't trip Knox warranty code.

AP: G800FXXU1AOG2
CP: G800FXXU1AOG2
CSC: G800FOXX1AOG1
There is not any 5.1.1 ROM for my CSC :/
Any other way?

Are you sure your CSC is OXX? I didn't find any ROM with that code, either lollipop or KitKat. Try using Phone Info from Play Store. It will show correct CSC and if there is a new ROM.

Yes, my CSC is: G800FOXX1AOG1
Here are some photos from Phone Info:
Code:
https://drive.google.com/folderview?id=0B4LdWx07QQ0xbl92bVFuZlJva3c&usp=sharing
On sammobile there are only 4.4.2 ROMs.

Actually your phone's CSC code is ORX (see second image you've uploaded), and there is no Lollipop for any of the available codes either. I don't recommend flashing any other ROM besides the one for your model, the safest way would be CM13, but it will trip Knox warranty, but then probably it would if you flashed other stock ROMs as well. Maybe someone else with a G800F can help you better, mine is G800H.

And if I flash CM and trip Knox, will I be able to complain the hardware part (for example problems with camera, charging port...)?

if you flash official firmware (even with different CSC) via odin, warranty/knox should be still OK -> http://androidforum.cz/prehrani-softwaru-a-zaruka-t72763.html
guide in czech language you'll understand: http://androidforum.cz/topic71393.html
there are some rumors about marshmallow for SM-G800F
i have s5 mini with csc TMS (t-mobile slovakia) still kitkat 4.4.2 and now i'm getting some ota:
The software update (869.77 MB) but per sammobile there is still no lollipop for TMS, or maybe just their web page is not up to date ?!
any way to find out what is this update about without installing it?
SamFirm for TMS still shows:
Model: SM-G800F
Version: G800FXXU1ANL1/G800FTMS1AOC1/G800FXXU1AOC2/G800FXXU1ANL1
OS: KitKat(Android 4.4.2)
Filename: SM-G800F_1_20150325171600_m20wixnutf.zip.enc4
Size: 1220058752 bytes (1163 MB)

Thank you very much, now I have upgraded Android with working knox!

mikronum said:
Thank you very much, now I have upgraded Android with working knox!
Click to expand...
Click to collapse
Hi mikronum! I have the very same device as yours:
AP: G800FXXU1AOG2
CP: G880FXXU1AOG2
CSC: G800FOXX1AOG1
And if i use the app "phone info samsung" i get the same information that are in your screenshots (CSC is ORX).
Can i ask you wich file did you download to upgrade to lollipop? It would be of great help for me.
Thanks in advance

Backup your data because all internal data will be lost after flashing.
You flash this image at your own responsibility. I am not responsible for any damage that might be caused by flashing this image
1. Download and extract firmware:
Code:
http://www.sammobile.com/firmwares/download/64779/G800FXXU1BOK7_G800FDBT1BOK7_DBT/
2. Download PIT file:
Code:
https://www.androidfilehost.com/?fid=24369303960685133
3. Download Odin (I used version 3.10.7):
Code:
http://odindownload.com/
4. Start Odin
5. Connect your phone in Download Mode (Power off then Volume Down + Home + Power, Power up on warning)
6. Select your phone in tab ID:COM
7. Click AP and select extracted .md5 file (It'll take some time to load)
8. Click on Pit tab next Options (dismiss warning), Click on PIT and select .pit file
9. Press START and wait... after flash you will see German notice, tap on button, phone will restart
10. There will be a new update in settings, and you can also remove preinstalled German apps

mikronum said:
Backup your data because all internal data will be lost after flashing.
You flash this image at your own responsibility. I am not responsible for any damage that might be caused by flashing this image
1. Download and extract firmware:
Code:
http://www.sammobile.com/firmwares/download/64779/G800FXXU1BOK7_G800FDBT1BOK7_DBT/
2. Download PIT file:
Code:
https://www.androidfilehost.com/?fid=24369303960685133
3. Download Odin (I used version 3.10.7):
Code:
http://odindownload.com/
4. Start Odin
5. Connect your phone in Download Mode (Power off then Volume Down + Home + Power, Power up on warning)
6. Select your phone in tab ID:COM
7. Click AP and select extracted .md5 file (It'll take some time to load)
8. Click on Pit tab next Options (dismiss warning), Click on PIT and select .pit file
9. Press START and wait... after flash you will see German notice, tap on button, phone will restart
10. There will be a new update in settings, and you can also remove preinstalled German apps
Click to expand...
Click to collapse
Thanks for taking the time to answer me .
I will download the file you have posted and think about doing such update.
Could you please confirm me just a couple of things?
1) after this procedure, how is the KNOX counter? Is it still ok? always 0x0?
2) the CSS code in the downoaded firmware is DBT (germany). What languages are available? Is the italian language available?
Thanks in advance.

After flashing KNOX is still 0x0, I use KNOX without any problems.
Italian language is available.

Is Slovak language also available in DBT firmware? Thanks.

Yes, you can select from all languages you have now on stock firmware.

I just checked from the system settings and .... the phone is downloading some kind of OTA .... i don't know yet if it is lillopop. I will tell you when it finishes ... it is a 886,66 MB update. Maybe Slovakian S5 mini are getting lollipop official update ....

I checked my 800F too and it downloaded an update with the same file size. So I checked available firmware for my region with an application called Phone INFO (star) Samsung (star) and it showed that there is an Lollipop update available on OTG and Kies. SAMSUNG FINALLY MADE IT!
P.S. I don't know why, but when I go to the page where I can upgrade, in description I don't see something like "Upgrade package to Android Lollipop", because my friend's device had it when he updated his samsung phone.

DarkLTU said:
So I checked available firmware for my region with an application called Phone INFO (star) Samsung (star) and it showed that there is an Lollipop update available on OTG and Kies.
Click to expand...
Click to collapse
If you are talking about this ( https://play.google.com/store/apps/details?id=org.vndnguyen.phoneinfo ) application, i have already been using it.
However, i didn't know that this app is able to tell if there is any firmware upgrade ... can you please tell me in which tab and at which line is there such information?
Thank you in advance
DarkLTU said:
P.S. I don't know why, but when I go to the page where I can upgrade, in description I don't see something like "Upgrade package to Android Lollipop", because my friend's device had it when he updated his samsung phone.
Click to expand...
Click to collapse
I also don't read anything referring to lollipop when i read the description of the OTA update from the phone. This is the reason why i was holding back. I tought it was another kitkat firmware ....
By the way, did you already downloaded and installed this update on your phone? Can you personally confirm it is lollipop?

Night on the web said:
If you are talking about this ( https://play.google.com/store/apps/details?id=org.vndnguyen.phoneinfo ) application, i have already been using it.
However, i didn't know that this app is able to tell if there is any firmware upgrade ... can you please tell me in which tab and at which line is there such information?
Thank you in advance
Click to expand...
Click to collapse
Yes, I'm talking about the same application as in the link. How to check available firmware:
When you open the program, there are three little lines on upper corner, so press those and then there should appear some more settings. There has to be a button called "Firmware Browser". Tap on it. Then write your model in first(longer) text box and CSC on second(CSC is region code(like DBT - Germany, XEO - Poland, so there should be written three capital letters, if not - write by yourself(you can find CSC in this program, there's a section called " CSC Codes"). Then, press the button "Find" and there should appear a list with available firmware.

Night on the web said:
I also don't read anything referring to lollipop when i read the description of the OTA update from the phone. This is the reason why i was holding back. I tought it was another kitkat firmware ....
By the way, did you already downloaded and installed this update on your phone? Can you personally confirm it is lollipop?
Click to expand...
Click to collapse
Yes, I can. I downloaded and installed the update. It took me about 15 minutes. Not the S6 level upgrade(a little worse than S6). Here's the photo for proof.

[Guide][SM-T555] UNBRICK Samsung Galaxy Tab A 9.7 [SM-T555] [SM-T550]

Hey,
I successfully unbricked my device.
If it fail you are flashing wrong FIRMWAR. HAPPENED TO ME FEW TIMES.
Click to expand...
Click to collapse
Follow this, it's very safe since you are flashing Stock Rom.
In order to get your CSC regional code you need to contact Samsung. This is really boring since you will have to deal with multiple agents from customer support.
I first contacted Samsung US via Live Chat under support... and they didn't provide any details about product Region at first. So I contacted them few times until they helped me.
YES SPAM THEM AGAIN AND AGAIN.
DONT EVEN SAY YOU ARE NOT FROM US AND DONT MENTION HARD BRICK OR ANYTHING.
So, according to them, my device is for Germanic region (I already knew this, I had some HSH Hotel bloatware).
I contacted German support via live chat and my device is from Austria.
VOILA.
Now that I know which region it is I need to check CSC Region Codes and I made a list.
I searched for them online until I matched codes on the left and Telecoms (carriers) on the right.
Austria (csc codes are on the left and Telecoms on the right):
CSC Regional Codes = Telecoms
AOM = AUSTRIA - unknown /generic probably
MOK = AUSTRIA - unknown /generic probably
TTR = Austria - magenta (former telering/t.mobile)
TRG = AUSTRIA - TELERING
MAX = AUSTRIA - t-mobile
DRE = AUSTRIA - Drei 3 (former Orange)
ONE = AUSTRIA - Orange
MOB = AUSTRIA - a1
ATO = AUSTRIA - Open Austria - directly from Samsung
So, I contacted Drei 3 and A1, I spam them a lot and eventually both agents answered my device is not on their list.
Since my device was SIM UNLOCKED I decided to flash ATO since it's Open and directly from Samsung AUSTRIA.
FIRMWARE
Caution, I didn't like 7.1.1 since I want Root.
So I flashed 5.1.1.
YES I HAD 7.1.1 BEFORE BRICK BUT I FLASHED BOTH 7.1.1 and then I flashed 5.0 for testing purpose. You can chose 1 of them and both are safe.
Click to expand...
Click to collapse
So now that I know which CSC Firmware I want to flash I have to download it. Yes, Firmware is same terminology for Stock ROM.
I downloaded mine from GALAXYFIRMWARE .COM
You could download older firmware if you want, I flashed both for TESTING
I had firmware 7.1.1 and that one I downloaded.
7.1.1 ATO
Then I downloaded 5.0.2 ATO
Choose which one you need.
Then Extract zip in 1 folder.
ODIN
Download unpatched
Patched Odin 3.13.1
For those looking for a modified, modded, or patched odin that is a newer build than all the fake and renamed prince comsy 3.12.3 versions floating around. I patch recent Odin versions to offer similar functionality to the princecomsy; in that...
forum.xda-developers.com
Click to expand...
Click to collapse
I leaved CHECKED AutoReboot and F.Reset
FLASHING
FOR 7.1.1
Now, every file from extracted zip make sure it matches Odin box:
BL file is going into BL slot
AP file is going into AP slot
CP file is going into CP slot
CSC file is going into CSC slot
For 5.0
There will be only 1 extracted file.
It goes into AP slot
Now make sure your Tab is turned off.
If not, remove back cover and unplug battery and plug it back again.
Download mode:
Press Home + Power + Volume Down
(at the same time)
When prompted blue window, press Volume UP
Now connect it to Odin and wait 2minutes to connect.
Start flashing.
If it fail you are flashing wrong FIRMWAR. HAPPENED TO ME FEW TIMES.
PIT FILE
USE This if ABOVE FAILE.
I did not test this.
Okay for some reason you are really in bad position and you really want to flash PIT.
Well you can extract Pit from 7.1.1 CSC.
Copy CSC file to Desktop and rename it to .zip extension:
It will look something like this:
CSC_ATO_T555ATO1CRH1_CL14058996_QB19181858_REV00_user_low_ship_MULTI_CERT.tar.md5.zip
Click to expand...
Click to collapse
Now extract it and look for Pit extension file.
Its something like:
GT510LTE_EUR_OPEN.pit
Click to expand...
Click to collapse
NOW make sure in ODIN Re-Partition is CHECKED.
Now that you have it and you are flashing with PIT.
IN ODIN THERE IS PIT OPTION CLICK ON IT.
IN PIT SLOT PUT PIT.
IN OTHER SLOTS PUT OTHER FILES FROM EXTRACTED ZIP.

Btw if you know how to root this device Android 5 or 6.
Let me know.