Hi, i am using custom ROM and I noticed after flashed the ROM my csc was not as my original stock ROM when i purchased the phone. What is the use of CSC and what is the impact if my csc is not for my region. Thanks
I was on Gingerbread 2.3.6 after upgrading via KIES it became 4.0.3
on recovery mode I found CSC code is MID which is related to Iraq
after that I downloaded 4.0.3 (United Arab Emirate) and flashed via PC Odin, I checked CSC code I found it MID not XSG which is related to united arab emirates
I am sure that the process completed successfully in PC odin
what is the problem? why CSC code didn't change from MID to XSG?
Maybe thats stock rom didn't do auto full wipe when flashing..
Change ur CSC using *#272*imei#..
It is will do factory reset..
So backup ur app n data using Titanium backup before..
Sent from my GT-N7000 using Tapatalk 2
warning, it might brick your device changing csc on ics with unsafe kernel as it will delete your data.
Either flash safe kernel throught pc odin and change,
or flash a gb with the prefered csc and change there, then flash ics with prefered csc throught pcodin. How? see dr ketans thread sticky section development.
best case would have been to root and backup efs before doing anything on original gb, how, see dr ketans toolbox thread general section
Sent from my GT-N7000 using Tapatalk 2
baz77 said:
warning, it might brick your device changing csc on ics with unsafe kernel as it will delete your data.
Either flash safe kernel throught pc odin and change,
or flash a gb with the prefered csc and change there, then flash ics with prefered csc throught pcodin. How? see dr ketans thread sticky section development.
best case would have been to root and backup efs before doing anything on original gb, how, see dr ketans toolbox thread general section
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
1- what do you mean with a safe kernel?
2- why flashing ICS directly with prefered CSC XSG (4.0.3) doesn't remove MID (4.0.3)?
mohammed_kira said:
1- what do you mean with a safe kernel?
2- why flashing ICS directly with prefered CSC XSG (4.0.3) doesn't remove MID (4.0.3)?
Click to expand...
Click to collapse
1. Safe kernel is one where the BRICK BUG CODE has been removed. All stock ICS kernels have the brick bug code.
2. If your ROM multi CSC does not include XSG then it willnot install XSG properly. Right now the ONLY SAFE WAY to have the csc that you want(XSG) is to downgrade to GB that has XSG. Set it to XSG via *#272*IME. Factory reset then check csc again,change as needed. Then Flash the ICS either with Odin or Mobile odin. I have tried this method 2x already. And this is on advice of Dr,. Ketan.
bongski55 said:
1. Safe kernel is one where the BRICK BUG CODE has been removed. All stock ICS kernels have the brick bug code.
2. If your ROM multi CSC does not include XSG then it willnot install XSG properly. Right now the ONLY SAFE WAY to have the csc that you want(XSG) is to downgrade to GB that has XSG. Set it to XSG via *#272*IME. Factory reset then check csc again,change as needed. Then Flash the ICS either with Odin or Mobile odin. I have tried this method 2x already. And this is on advice of Dr,. Ketan.
Click to expand...
Click to collapse
this is the ICS rom I flashed N7000JPLPD---4.0.3/12.06---N7000OJPLP7--- United Arab Emirates (single file)
N7000JPLPD_N7000XXLPT_N7000OJPLP7_XSG.md5 (4.0.3)
I flashed this file via PC odin over the excisting same version rom (4.0.3 MID), but still CSC in recovery mode is MID not XSG.
You mean after downgrading to Gingerbread with prefered united arab emirate rom and performing factory reset the code should change from MID to XSG. am I right?
mohammed_kira said:
this is the ICS rom I flashed N7000JPLPD---4.0.3/12.06---N7000OJPLP7--- United Arab Emirates (single file)
N7000JPLPD_N7000XXLPT_N7000OJPLP7_XSG.md5 (4.0.3)
I flashed this file via PC odin over the excisting same version rom (4.0.3 MID), but still CSC in recovery mode is MID not XSG.
You mean after downgrading to Gingerbread with prefered united arab emirate rom and performing factory reset the code should change from MID to XSG. am I right?
Click to expand...
Click to collapse
Its mean the stock rom didn't do auto full wipe...
So ur CSC still using MID...
Sent from my GT-N7000 using Tapatalk 2
Mr.bongski55
please step by step how to change CSC from MID to XSG in gingerbread official stock ROM
what is the function of this code *#272*IME
what is the Multi CSC rom? could you please explain
also FYI gingerbread roms for middle east only for United arab emirates and saudi arabia, but ICS roms for middle east covering most countries UAE, saudi arabia, egypt, moroco, libya, etc.......
the code of egypt for example in ICS rom is EGY, how to put it in Gingerbread rom which doesn't contains egypt country?????
Thank you very much
mohammed_kira said:
Mr.bongski55
please step by step how to change CSC from MID to XSG in gingerbread official stock ROM and what is the function of this code *#272*IME
Thank you very much
Click to expand...
Click to collapse
*#272*imei#
Is code to change ur csc..
Type it in ur phone...
Its will show csc options..
Chose the csc do u want..
Touch install..
It will do rebooting n factory reset...
Backup ur app n data before do it..
Sent from my GT-N7000 using Tapatalk 2
fahrie12 said:
*#272*imei#
Is code to change ur csc..
Type it in ur phone...
Its will show csc options..
Chose the csc do u want..
Touch install..
It will do rebooting n factory reset...
Backup ur app n data before do it..
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
thank you for your quick reply
appreciated
please see my edited post#8 again after modifications
mohammed_kira said:
Mr.bongski55
please step by step how to change CSC from MID to XSG in gingerbread official stock ROM
what is the function of this code *#272*IME
what is the Multi CSC rom? could you please explain
also FYI gingerbread roms for middle east only for United arab emirates and saudi arabia, but ICS roms for middle east covering most countries UAE, saudi arabia, egypt, moroco, libya, etc.......
the code of egypt for example in ICS rom is EGY, how to put it in Gingerbread rom which doesn't contains egypt country?????
Thank you very much
Click to expand...
Click to collapse
I hope its wil work..
U must pick the egypt csc from system/csc of other rom using file manager exmple root explorer..
Copy the egypt csc folder n paste to ur gingerbread rom using the file manager to system/csc..
N then reboot ur device..
Remember,u can do it just after ur rom was rooted..
Sent from my GT-N7000 using Tapatalk 2
many thanks fahrie12
mohammed_kira said:
many thanks fahrie12
Click to expand...
Click to collapse
Ur wallcome bud
Sent from my GT-N7000 using Tapatalk 2
Same problem need help
mohammed_kira said:
thank you for your quick reply
appreciated
please see my edited post#8 again after modifications
Click to expand...
Click to collapse
It seems i have the exact same problem, My CSC is MID while i'm using the United Arab Emirates Rom N7000JPLR8_N7000OJPLR8_XSG.
So did it work for you when you change your CSC manualy and what where your steps you followed to do that on the official Stock rom?
Will the steps that you did will work on my N7000 which i am already using N7000JPLR8_N7000OJPLR8_XSG????
See below i have attached screenshots so if anyone esle will be kind to help and explain.
I will also include some of the battery screenshots hope you will like it, coz i don't want to loose any of my battery preformance if i will make any changes although i'm sure that the CSC has nothing to do with battery and ect.
thank you so much
maskour kteer
Hi there. I'm using stock rom XWKTN that have a multi CSC.
Question:
Can I download the latest unbranded rom from sammobile (S5570XIKT1), flash it with odin and apply the multi-csc from another rom (XWKTN)?
Also is possible to tell me the most recent European (open/unbranded) firmware.
BR
Hi Guys
Urgent Tab S Germany Firmware To Indian Firmware Possible .. CSC Code : DBT To CSC Code : INS .. Any Problem If I Change .. Flash Indian Firmware ?
Hello
If I want to change my CSC (MID) to another one let's say the UAE one, can I simply flash Home CSC in Odin?
If yes should I follow the same step as flashing an entire FW ?
And can I find the Home CSC alone or I have to download the full FW Zip?
vegetaleb said:
Hello
If I want to change my CSC (MID) to another one let's say the UAE one, can I simply flash Home CSC in Odin?
If yes should I follow the same step as flashing an entire FW ?
And can I find the Home CSC alone or I have to download the full FW Zip?
Click to expand...
Click to collapse
HOME_CSC does not change the CSC code, you would use the other CSC firmware file.
However, mixing firmware files from different versions or regions is not advisable.
Sadly and to the best of my knowlege it is no longer possible to change CSC using ODIN & flashing just a stock Samung FW pack.
You need to buy credits and use an online service (Samkey?) to change CSC on Samsung phones now.
I've changed CSC from VOD (uk) to XID (Indonesia, for native call recording) with Odin without wipe anything. I only flashed stock XID firmware with home_csc and it works without Samkey
manager77 said:
I've changed CSC from VOD (uk) to XID (Indonesia, for native call recording) with Odin without wipe anything. I only flashed stock XID firmware with home_csc and it works without Samkey
Click to expand...
Click to collapse
Hi just out of curious what about other apps like your banking and transportation will there be any serious side effects after you have change the CSC?
Mike Ng said:
Hi just out of curious what about other apps like your banking and transportation will there be any serious side effects after you have change the CSC?
Click to expand...
Click to collapse
All work like before the change.
manager77 said:
All work like before the change.
Click to expand...
Click to collapse
Oh that good thanks for your reply.. I may do it on my set. Been looking for answers able to do this changing the CSC file.
Once again thank you.
manager77 said:
I've changed CSC from VOD (uk) to XID (Indonesia, for native call recording) with Odin without wipe anything. I only flashed stock XID firmware with home_csc and it works without Samkey
Click to expand...
Click to collapse
How you do it ??? I´m on XEZ CSC and it´from Multi CSC OXM. I can´t change it to my ORS (Orange) ??? ORS is from Multi OXM too :/
mirecc21 said:
How you do it ??? I´m on XEZ CSC and it´from Multi CSC OXM. I can´t change it to my ORS (Orange) ??? ORS is from Multi OXM too :/
Click to expand...
Click to collapse
Xid is not from multi csc, it's single csc.
But how about to change first to to XID and then to the wanted CSC Region ?
Refer: https://forum.xda-developers.com/t/...mware-sm-g998b-27th-jan.4218529/post-84367239
android-utelias said:
But how about to change first to to XID and then to the wanted CSC Region ?
Refer: https://forum.xda-developers.com/t/...mware-sm-g998b-27th-jan.4218529/post-84367239
Click to expand...
Click to collapse
Yes it will work I think. I changed with DBT to XID and today I flash DBT back and I have DBT. So I think different countries should change as follows. And I don't have to use samkey
i have downloaded a full firmware for my s20 plus 5g Korean version, and i also downloaded the full firmware of s20 plus from the Philippines. i want to change my csc to Philippines using Odin. should i check all the file inside the s20 plus firmware from the philippines or just the CSC file only? then the rest is from my s20 plus 5g firmware file